Search

The present work investigates a novel four-port, multiple-input multiple-output (MIMO), single element dielectric resonator antenna (DRA) for sub-6 GHz band. The DRA is designed and fabricated into a symmetric cross shape and fed using a coplanar waveguide (CPW) feed. A single radiator with four ports is rarely found in the literature. The -10 dB impedance bandwidth covered by the antenna is from 5.52 GHz to 6.2 GHz (11.6%) which covers fifth generation (5G) new radio (NR) bands N47 and wireless local area network (WLAN) IEEE 802.11a band. The isolation between orthogonal ports is about 15 dB while the isolation between opposite ports is 12 dB. The radiation pattern of the proposed antenna is bidirectional due to the absence of a ground plane below the DRA. The orthogonal modes excited in the DRA are [Formula: see text] and [Formula: see text] through the four symmetrical CPW feeds. The simulated and measured results of the proposed design show that MIMO characteristics are achieved by pattern diversity between the ports. Due to the perfect symmetry of the design, the proposed work could be extended to MIMO array applications as well.

The present work investigates a novel four-port, multiple-input multiple-output (MIMO), single element dielectric resonator antenna (DRA) for sub-6 GHz band. The DRA is designed and fabricated into a symmetric cross shape and fed using a coplanar waveguide (CPW) feed. A single radiator with four ports is rarely found in the literature. The -10 dB impedance bandwidth covered by the antenna is from 5.52 GHz to 6.2 GHz (11.6%) which covers fifth generation (5G) new radio (NR) bands N47 and wireless local area network (WLAN) IEEE 802.11a band. The isolation between orthogonal ports is about 15 dB while the isolation between opposite ports is 12 dB. The radiation pattern of the proposed antenna is bidirectional due to the absence of a ground plane below the DRA. The orthogonal modes excited in the DRA are [Formula: see text] and [Formula: see text] through the four symmetrical CPW feeds. The simulated and measured results of the proposed design show that MIMO characteristics are achieved by pattern diversity between the ports. Due to the perfect symmetry of the design, the proposed work could be extended to MIMO array applications as well.

Degradation in the polymeric insulators is caused due to the environmental stresses. The main aim of this paper is to explore the improved aging characteristics of hybrid samples by adding nano/micro silica in High Temperature Vulcanized Silicone Rubber (HTV-SiR) under long term accelerated aging conditions for 9000 hours. As HTV-SiR is unable to sustain environmental stresses for a long time, thus a long term accelerated aging behavior is an important phenomenon to be considered for field application. The aging characteristics of nano/micro filled HTV-SiR are analyzed by using techniques such as Scanning Electron Microscopy (SEM), Leakage Current (LC), Fourier Transform Infrared Microscopy (FTIR), Hydrophobicity Classification (HC), and breakdown strength for the aging time of 9000 hours. FTIR and leakage currents are measured after every cycle. All the co-filled samples revealed escalated aging characteristics as compared to the neat sample except the SN8 sample (8% nano-silica+20% micro-silica) after 9000 hours of aging. The highest loading of 6% and 8% nano-silica with 20% micro-silica do not contribute to the improved performance when compared with the neat and hybrid samples. However, from the critical experimental analysis, it is deduced that SN2 sample (2% nano-silica+20% micro-silica) is highly resistant to the long term accelerated aging conditions. SN2 has no cracks, lower loss percentages in the important FTIR absorption peaks, higher breakdown strength and superior HC after aging as compared to the unfilled and hybrid samples.

Degradation in the polymeric insulators is caused due to the environmental stresses. The main aim of this paper is to explore the improved aging characteristics of hybrid samples by adding nano/micro silica in High Temperature Vulcanized Silicone Rubber (HTV-SiR) under long term accelerated aging conditions for 9000 hours. As HTV-SiR is unable to sustain environmental stresses for a long time, thus a long term accelerated aging behavior is an important phenomenon to be considered for field application. The aging characteristics of nano/micro filled HTV-SiR are analyzed by using techniques such as Scanning Electron Microscopy (SEM), Leakage Current (LC), Fourier Transform Infrared Microscopy (FTIR), Hydrophobicity Classification (HC), and breakdown strength for the aging time of 9000 hours. FTIR and leakage currents are measured after every cycle. All the co-filled samples revealed escalated aging characteristics as compared to the neat sample except the SN8 sample (8% nano-silica+20% micro-silica) after 9000 hours of aging. The highest loading of 6% and 8% nano-silica with 20% micro-silica do not contribute to the improved performance when compared with the neat and hybrid samples. However, from the critical experimental analysis, it is deduced that SN2 sample (2% nano-silica+20% micro-silica) is highly resistant to the long term accelerated aging conditions. SN2 has no cracks, lower loss percentages in the important FTIR absorption peaks, higher breakdown strength and superior HC after aging as compared to the unfilled and hybrid samples.