Search

Regional flood frequency analysis forms the basis for ascertaining design thresholds for extreme flow events for the purpose of resource management and design of hydraulic structures, especially at ungauged or partially gauged basins. A crucial step in this analysis is transferring available information from gauged sites to ungauged sites, which is achieved through delineation of homogeneous regions encompassing multiple catchment locations, followed by the formulation of a flood estimation model. While this process has been accomplished through a range of statistical homogenization alternatives, the present study offers a new approach rooted in the theory of complex networks, offering considerable advantages over what is traditionally followed. Data from 202 sites in Australia representing catchments of varying geographic, climatic, and vegetation attributes are used to assess the alternative proposed. The results are examined via (1) direct comparison of the location and number of homogeneous neighbors from network theory with results using canonical correlation analysis (CCA) and (2) assessing the accuracy of estimated flood quantiles by applying a common model that estimates flood quantiles using information from the two alternate groups of homogeneous sites (from network theory and CCA). Results show that network theory offers merit in delineating homogenous regions, with resulting design flood estimates showing improvements across different return periods compared to the CCA alternative used.

This paper presents a robust two stage maximum power point tracking (MPPT) system of the photovoltaic (PV) module using an improved restricted control set model predictive control (iRCS-MPC) technique. The suggested work is improved in two aspects; a revision in conventional P&O algorithm is made by employing three distinct step sizes for different conditions, and an improvement in conventional MPC algorithm. The improved MPC algorithm is based on the single step prediction horizon that provides less computational load and swift tracking of maximum power point (MPP) by applying the control pulses directly to the converter switch. The computer aided experimental results for various environmental scenarios revealed that compared with the conventional method (conventional P&O + MPC), for the PV power and inductor current, the undershoot and overshoot is decreased to 68% and 35% respectively under stiff environmental conditions. In addition, the settling time needed to reach a stable state is significantly reduced in the proposed system. The viability of the solution suggested is verified in MATLAB/Simulink and by hardware experimentation.

In this paper we are describing how audio-visual corpora recordings using crowd-sourcing techniques can be used for the audio-visual synthesis of attitudinal non-verbal feedback expressions for virtual agents. We are discussing the limitations of this approach as well as where we see the opportunities for this technology., QC 20180212

One of the fundamental steps in regional rainfall frequency analysis is deciding the method by which rainfall stations are to be grouped together to form regions. This paper compares three methods of forming regions for use in estimating design rainfalls: a fixed region approach where all the available sites are included in a single region, a Region of Influence (ROI) approach based on geographical proximity and a hybrid approach where sites with similar topographic orientations are grouped together.The three region types were implemented in a Bayesian Generalized Least Squares Regression (BGLSR) framework which leads to regionalized regression equations that can be used to predict rainfall L-moments at ungauged sites. A leave-one-out cross validation approach was used to compare the relative accuracy, reliability and uncertainty of the derived rainfall statistics and resulting estimates of the rainfall quantiles. The study used data from two areas of Australia chosen for their highly varied topography and different climatic influences.It was found that all three methods provided good estimates of the L-moment statistics and the rainfall quantiles. The hybrid approach produced the smallest errors in the South-East Queensland region whilst for the Tasmanian region the fixed region approach was best. The results from this study show that although there is a slight benefit in using the proposed hybrid approach for BGLSR, these benefits were minor compared to maximizing the number of stations used to calibrate the BGLSR equations. This conclusion regarding the number of stations could be tested in future work by repeating the analyses in areas with sparser station density. Another test could be to simulate reduced station coverage in the current study areas by leaving stations out of the analyses. Finally it would be interesting to see if similar results are obtained by expanding the study area so that different climatological regimes are assessed.

This paper presents a case study on streamf ow data preparation for a regional f ood frequency analysis (RFFA) project for the states of Victoria and NSW, in connection with the forthcoming edition of Australian Rainfall and Runoff. The study gathered annual maximum f ood series data for a large number of stations from Victoria and NSW, and applied various statistical techniques to prepare the f nal data set. It was found that a large primary data set, even if selected using a fairly stringent set of criteria, cannot guarantee a similarly large f nal data set, as streamf ow data are affected by many sources of uncertainty. The trade-offs between quality and quantity are discussed and illustrated. The maximum rating ratio, def ned as the ratio of the largest estimated f ow and the maximum measured f ow at a gauging station, is used to identify stations whose quantiles may be seriously affected by rating curve errors. In a case study involving Victorian stations, the importance of maintaining a high spatial coverage of stations was demonstrated. It was shown that a 50% reduction in the number of stations used in a RFFA resulted in an increase of the standard error of prediction of f ood quantiles up to 90%. © Institution of Engineers Australia, 2010.

This paper presents a case study on streamf ow data preparation for a regional f ood frequency analysis (RFFA) project for the states of Victoria and NSW, in connection with the forthcoming edition of Australian Rainfall and Runoff. The study gathered annual maximum f ood series data for a large number of stations from Victoria and NSW, and applied various statistical techniques to prepare the f nal data set. It was found that a large primary data set, even if selected using a fairly stringent set of criteria, cannot guarantee a similarly large f nal data set, as streamf ow data are affected by many sources of uncertainty. The trade-offs between quality and quantity are discussed and illustrated. The maximum rating ratio, def ned as the ratio of the largest estimated f ow and the maximum measured f ow at a gauging station, is used to identify stations whose quantiles may be seriously affected by rating curve errors. In a case study involving Victorian stations, the importance of maintaining a high spatial coverage of stations was demonstrated. It was shown that a 50% reduction in the number of stations used in a RFFA resulted in an increase of the standard error of prediction of f ood quantiles up to 90%. © Institution of Engineers Australia, 2010.

Item does not contain fulltext, Jumping translocations (JTs) and segmental jumping translocations (SJTs) are unbalanced translocations involving a donor chromosome arm or chromosome segment that has fused to multiple recipient chromosomes. In leukemia, where JTs have been predominantly observed, the donor segment (usually 1q) preferentially fuses to the telomere regions of recipient chromosomes. In this study, spectral karyotyping (SKY) and FISH analysis revealed 188 JTs and SJTs in 10 cell lines derived from carcinomas of the bladder, prostate, breast, cervix, and pancreas. Multiple JTs and SJTs were detected in each cell line and contributed to recurrent unbalanced whole-arm translocations involving chromosome arms 5p, 14q, 15q, 20q, and 21q. Sixty percent (113/188) of JT breakpoints occurred within centromere or pericentromeric regions of the recipient chromosomes, whereas only 12% of the breakpoints were located in the telomere regions. JT breakpoints of both donor and recipient chromosomes coincided with numerous fragile sites as well as viral integration sites for human DNA viruses. The JTs within each tumor cell line promoted clonal progression, leading to the acquisition of extra copies of the donated chromosome segments that often contained oncogenes (MYC, ABL, HER2/NEU, etc.), consequently resulting in tumor-specific genomic imbalances. Published 2001 Wiley-Liss, Inc.

Item does not contain fulltext, Jumping translocations (JTs) and segmental jumping translocations (SJTs) are unbalanced translocations involving a donor chromosome arm or chromosome segment that has fused to multiple recipient chromosomes. In leukemia, where JTs have been predominantly observed, the donor segment (usually 1q) preferentially fuses to the telomere regions of recipient chromosomes. In this study, spectral karyotyping (SKY) and FISH analysis revealed 188 JTs and SJTs in 10 cell lines derived from carcinomas of the bladder, prostate, breast, cervix, and pancreas. Multiple JTs and SJTs were detected in each cell line and contributed to recurrent unbalanced whole-arm translocations involving chromosome arms 5p, 14q, 15q, 20q, and 21q. Sixty percent (113/188) of JT breakpoints occurred within centromere or pericentromeric regions of the recipient chromosomes, whereas only 12% of the breakpoints were located in the telomere regions. JT breakpoints of both donor and recipient chromosomes coincided with numerous fragile sites as well as viral integration sites for human DNA viruses. The JTs within each tumor cell line promoted clonal progression, leading to the acquisition of extra copies of the donated chromosome segments that often contained oncogenes (MYC, ABL, HER2/NEU, etc.), consequently resulting in tumor-specific genomic imbalances. Published 2001 Wiley-Liss, Inc.

Item does not contain fulltext, Jumping translocations (JTs) and segmental jumping translocations (SJTs) are unbalanced translocations involving a donor chromosome arm or chromosome segment that has fused to multiple recipient chromosomes. In leukemia, where JTs have been predominantly observed, the donor segment (usually 1q) preferentially fuses to the telomere regions of recipient chromosomes. In this study, spectral karyotyping (SKY) and FISH analysis revealed 188 JTs and SJTs in 10 cell lines derived from carcinomas of the bladder, prostate, breast, cervix, and pancreas. Multiple JTs and SJTs were detected in each cell line and contributed to recurrent unbalanced whole-arm translocations involving chromosome arms 5p, 14q, 15q, 20q, and 21q. Sixty percent (113/188) of JT breakpoints occurred within centromere or pericentromeric regions of the recipient chromosomes, whereas only 12% of the breakpoints were located in the telomere regions. JT breakpoints of both donor and recipient chromosomes coincided with numerous fragile sites as well as viral integration sites for human DNA viruses. The JTs within each tumor cell line promoted clonal progression, leading to the acquisition of extra copies of the donated chromosome segments that often contained oncogenes (MYC, ABL, HER2/NEU, etc.), consequently resulting in tumor-specific genomic imbalances. Published 2001 Wiley-Liss, Inc.

Item does not contain fulltext

Contains fulltext : 24413___.PDF (publisher's version ) (Open Access)

Item does not contain fulltext

Item does not contain fulltext

Contains fulltext : 24413___.PDF (publisher's version ) (Open Access)

Item does not contain fulltext

Contains fulltext : 24413___.PDF (publisher's version ) (Open Access)