Search

In this paper, we present a simplified theoretical model based on the method of images that predicts the direction of the microjet produced after the implosion of a cavitation bubble created in a corner of a free interface and rigid wall. Our theoretical predictions have been verified by means of a thorough experimental study in which the distances of the pulsed-laser cavitation bubble to the wall and the free surface are varied in a systematic manner. In addition, we extend the predictions to arbitrary values of the corner angle, pi/(2n) with n a natural number. The present analytical solution might be a hint to a practical design for preventing cavitation-induced damage.

In this paper, we present a simplified theoretical model based on the method of images that predicts the direction of the microjet produced after the implosion of a cavitation bubble created in a corner of a free interface and rigid wall. Our theoretical predictions have been verified by means of a thorough experimental study in which the distances of the pulsed-laser cavitation bubble to the wall and the free surface are varied in a systematic manner. In addition, we extend the predictions to arbitrary values of the corner angle, pi/(2n) with n a natural number. The present analytical solution might be a hint to a practical design for preventing cavitation-induced damage.

In this paper, we present a simplified theoretical model based on the method of images that predicts the direction of the microjet produced after the implosion of a cavitation bubble created in a corner of a free interface and rigid wall. Our theoretical predictions have been verified by means of a thorough experimental study in which the distances of the pulsed-laser cavitation bubble to the wall and the free surface are varied in a systematic manner. In addition, we extend the predictions to arbitrary values of the corner angle, pi/(2n) with n a natural number. The present analytical solution might be a hint to a practical design for preventing cavitation-induced damage.

In this paper, we present a simplified theoretical model based on the method of images that predicts the direction of the microjet produced after the implosion of a cavitation bubble created in a corner of a free interface and rigid wall. Our theoretical predictions have been verified by means of a thorough experimental study in which the distances of the pulsed-laser cavitation bubble to the wall and the free surface are varied in a systematic manner. In addition, we extend the predictions to arbitrary values of the corner angle, pi/(2n) with n a natural number. The present analytical solution might be a hint to a practical design for preventing cavitation-induced damage.

This study presents an analytical model of the dynamics of an axisymmetric liquid bridge confined between two circular pads and subjected to small vertical periodic perturbations. Such system finds important applications in microassembly and microjoint design, where force and damping need to be precisely controlled. The liquid bridge is modelled by an equivalent spring/dashpot/mass system characterised by the spring constant k, the damping coefficient b and the equivalent mass m, respectively. An abacus for k as well as analytical approximations for k, b and m based on simplifications of the Navier-Stokes equation are provided. The study is validated by experiments and numerical simulations of the system. We describe the experimental setup we designed to investigate vertical forces arising on the bottom pad from small periodic perturbations of the top pad confining the liquid meniscus. The setup allowed the accurate control of all physical and geometrical parameters relevant for the experiments. The parameters we investigated are both physical (viscosity and surface tension of the fluid) and geometrical (the edge angle between the meniscus and the pad, the height of the meniscus). The good agreement between model predictions and results let us conclude that k, b and m involve only one physical property of the liquid, namely the surface tension, the viscosity and the density, respectively. © 2012 Elsevier Masson SAS. All rights reserved., SCOPUS: ar.j, info:eu-repo/semantics/published

This study presents an analytical model of the dynamics of an axisymmetric liquid bridge confined between two circular pads and subjected to small vertical periodic perturbations. Such system finds important applications in microassembly and microjoint design, where force and damping need to be precisely controlled. The liquid bridge is modelled by an equivalent spring/dashpot/mass system characterised by the spring constant k, the damping coefficient b and the equivalent mass m, respectively. An abacus for k as well as analytical approximations for k, b and m based on simplifications of the Navier-Stokes equation are provided. The study is validated by experiments and numerical simulations of the system. We describe the experimental setup we designed to investigate vertical forces arising on the bottom pad from small periodic perturbations of the top pad confining the liquid meniscus. The setup allowed the accurate control of all physical and geometrical parameters relevant for the experiments. The parameters we investigated are both physical (viscosity and surface tension of the fluid) and geometrical (the edge angle between the meniscus and the pad, the height of the meniscus). The good agreement between model predictions and results let us conclude that k, b and m involve only one physical property of the liquid, namely the surface tension, the viscosity and the density, respectively. © 2012 Elsevier Masson SAS. All rights reserved., SCOPUS: ar.j, info:eu-repo/semantics/published

This paper presents a model, using a phase-field method, that is able to simulate the motion of a solid sphere impacting on a liquid surface, including the effects of capillary and hydrodynamic forces. The basic phenomena that were the subject of our research effort are the small scale mechanism such as the wetting property of the solid surface which control the large scale phenomena of the interaction. The coupled problem during the impact will be formulated by the inclusion of the surface energies of the solid surface in the formulation, which gives a reliable prediction of the motion of solid objects in/on/out of a liquid surface and the hydrodynamic behaviours at small scales when the inertia of fluid is less important than its surface tension. Numerical results at different surface wettabilities and impact conditions will be presented and compared with the experiments of Duez el al. [C. Duez, C. Ybert, C. Clanet, L. Bocquet, Nat. Phys. 3 (2007) 180-183] and Lee and Kim [D. Lee. H. Kim, Langmuir 24 (1) (2008) 142]. (C) 2009 IMACS. Published by Elsevier B.V. All rights reserved., QC 20110218

This paper presents a model, using a phase-field method, that is able to simulate the motion of a solid sphere impacting on a liquid surface, including the effects of capillary and hydrodynamic forces. The basic phenomena that were the subject of our research effort are the small scale mechanism such as the wetting property of the solid surface which control the large scale phenomena of the interaction. The coupled problem during the impact will be formulated by the inclusion of the surface energies of the solid surface in the formulation, which gives a reliable prediction of the motion of solid objects in/on/out of a liquid surface and the hydrodynamic behaviours at small scales when the inertia of fluid is less important than its surface tension. Numerical results at different surface wettabilities and impact conditions will be presented and compared with the experiments of Duez el al. [C. Duez, C. Ybert, C. Clanet, L. Bocquet, Nat. Phys. 3 (2007) 180-183] and Lee and Kim [D. Lee. H. Kim, Langmuir 24 (1) (2008) 142]. (C) 2009 IMACS. Published by Elsevier B.V. All rights reserved.