Search

A devastating earthquake with moment magnitude 7.5 occurred in the Noto Peninsula in central Japan on 1 January 2024. We estimate the rupture evolution of this earthquake from teleseismic P-wave data using the potency-density tensor inversion method, which provides information on the spatiotemporal slip distribution including fault orientations. The results show a long and quiet initial rupture phase that overlaps with regions of preceding earthquake swarms and associated aseismic deformation. The following three major rupture episodes evolve on segmented, differently oriented faults bounded by the initial rupture region. The irregular initial rupture process followed by the multi-scale rupture growth is considered to be controlled by the preceding seismic and aseismic processes and the geometric complexity of the fault system. Such a discrete rupture scenario, including the triggering of an isolated fault rupture, adds critical inputs on the assessment of strong ground motion and associated damages for future earthquakes.

Author Posting. © American Geophysical Union, 2018. This article is posted here by permission of American Geophysical Union for personal use, not for redistribution. The definitive version was published in Journal of Geophysical Research: Solid Earth 123 (2018): 7722-7740, doi:10.1029/2018JB015942., On Gofar Transform Fault on the East Pacific Rise, the largest earthquakes (6.0 ≤ MW ≤ 6.2) have repeatedly ruptured the same portion of the fault, while intervening fault segments host swarms of microearthquakes. These long‐term patterns in earthquake occurrence suggest that heterogeneous fault zone properties control earthquake behavior. Using waveforms from ocean bottom seismometers that recorded seismicity before and after an anticipated 2008 MW 6.0 mainshock, we investigate the role that differences in material properties have on earthquake rupture at Gofar. We determine stress drop for 138 earthquakes (2.3 ≤ MW ≤ 4.0) that occurred within and between the rupture areas of large earthquakes. Stress drops are calculated from corner frequencies derived using an empirical Green's function spectral ratio method, and seismic moments are obtained by fitting the omega‐square source model to the low frequency amplitude of the displacement spectrum. Our analysis yields stress drops from 0.04 to 3.2 MPa with statistically significant spatial variation, including ~2 times higher average stress drop in fault segments where large earthquakes also occur compared to fault segments that host earthquake swarms. We find an inverse correlation between stress drop and P wave velocity reduction, which we interpret as the effect of fault zone damage on the ability of the fault to store strain energy that leads to our spatial variations in stress drop. Additionally, we observe lower stress drops following the MW 6.0 mainshock, consistent with increased damage and decreased fault strength after a large earthquake., W. M. Keck Foundation; National Science Foundation Division of Ocean Sciences (OCE) Grant Number: 1352565, 2019-03-07

On Gofar Transform Fault on the East Pacific Rise, the largest earthquakes (6.0 ≤ MW ≤ 6.2) have repeatedly ruptured the same portion of the fault, while intervening fault segments host swarms of microearthquakes. These long‐term patterns in earthquake occurrence suggest that heterogeneous fault zone properties control earthquake behavior. Using waveforms from ocean bottom seismometers that recorded seismicity before and after an anticipated 2008 MW 6.0 mainshock, we investigate the role that differences in material properties have on earthquake rupture at Gofar. We determine stress drop for 138 earthquakes (2.3 ≤ MW ≤ 4.0) that occurred within and between the rupture areas of large earthquakes. Stress drops are calculated from corner frequencies derived using an empirical Green's function spectral ratio method, and seismic moments are obtained by fitting the omega‐square source model to the low frequency amplitude of the displacement spectrum. Our analysis yields stress drops from 0.04 to 3.2 MPa with statistically significant spatial variation, including ~2 times higher average stress drop in fault segments where large earthquakes also occur compared to fault segments that host earthquake swarms. We find an inverse correlation between stress drop and P wave velocity reduction, which we interpret as the effect of fault zone damage on the ability of the fault to store strain energy that leads to our spatial variations in stress drop. Additionally, we observe lower stress drops following the MW 6.0 mainshock, consistent with increased damage and decreased fault strength after a large earthquake.

Much of Oklahoma and southern Kansas has seen widespread seismic activity in the last decade that is attributed to large-scale wastewater disposal into the Arbuckle group. Using a waveform-relocated earthquake catalog, we perform a systematic study of the activity on several hundreds of identified faults. We use 93 sequences with at least 30 events for a detailed analysis of their spatiotemporal evolution. For most awakened faults, seismicity tends to initiate at shallower depth and migrates deeper along the faults as the sequence proceeds. No major sequence starts with the largest earthquake, and many sequences initiate months before they rise to peak activity. We study temporal clustering as a means to quantify earthquake interactions. Some sequences show no temporal clustering similar to Poissonian background seismicity but at much higher rate than the natural background. Other sequences exhibit strong temporal clustering akin to main shock-aftershock sequences. We conclude that once initiated by anthropogenic forcing, portions of the activated faults in the Oklahoma/Kansas area are close enough to failure to continue failing through earthquake interactions. In many sequences, including those with the largest earthquakes, seismicity continues within the previously activated region rather than by growing the activated area. Therefore, monitoring seismicity with a low magnitude threshold and high location precision has the potential to detect minor activity as it initiates failure on specific faults and thus provide time to take actions to mitigate the occurrence of potentially damaging earthquakes.

Much of Oklahoma and southern Kansas has seen widespread seismic activity in the last decade that is attributed to large-scale wastewater disposal into the Arbuckle group. Using a waveform-relocated earthquake catalog, we perform a systematic study of the activity on several hundreds of identified faults. We use 93 sequences with at least 30 events for a detailed analysis of their spatiotemporal evolution. For most awakened faults, seismicity tends to initiate at shallower depth and migrates deeper along the faults as the sequence proceeds. No major sequence starts with the largest earthquake, and many sequences initiate months before they rise to peak activity. We study temporal clustering as a means to quantify earthquake interactions. Some sequences show no temporal clustering similar to Poissonian background seismicity but at much higher rate than the natural background. Other sequences exhibit strong temporal clustering akin to main shock-aftershock sequences. We conclude that once initiated by anthropogenic forcing, portions of the activated faults in the Oklahoma/Kansas area are close enough to failure to continue failing through earthquake interactions. In many sequences, including those with the largest earthquakes, seismicity continues within the previously activated region rather than by growing the activated area. Therefore, monitoring seismicity with a low magnitude threshold and high location precision has the potential to detect minor activity as it initiates failure on specific faults and thus provide time to take actions to mitigate the occurrence of potentially damaging earthquakes.

We report new data on gas and isotope compositions of mantle-derived exhalations from five locations in the Vogtland (Germany)/NW Bohemia (Czech Republic) area, close to the Nový Kostel focal zone, recorded by monthly sampling of gases over a three year period. This region is the locus typicus for the term “earthquake swarm”; since 1985/86 the largest numbers of earthquake swarms in the Vogtland/NW Bohemia have occurred in the Nový Kostel focal zone. Mantle-derived degassing has been studied at four locations within the Cheb Basin degassing centre, and at the Wettinquelle spring to the north on the edge of the Cheb Basin. The Bublák and U Mostku locations are on the Počatky Plesná Fault Zone (PPZ) while the Kopanina and Dolni Častkov locations are on the Mariánské Láznĕ Fault (MLF). The mantle-derived helium content at locations along the PPZ covers the range of the sub-continental lithospheric mantle (SCLM). Along the MLF the 3He/4He ratios are with up to 5.4 Ra a little bit lower as at the PPZ locations. The CO2/3He ratios point to a predominantly magmatic source. Depending on the magnitude of gas flux the monthly sampling results indicated various major influences on the fluid signatures at the monitored locations due to seasonal cycles based on the different strong influence of CO2/water interaction. Micro-seismicity occurred repeatedly during the monitoring period and seismically triggered geochemical anomalies were repeatedly observed at the locations close to the focal zone. The 3He/4He ratios drop from 5.9 Ra (mean) up to 5.6 Ra at Bublák and from 5.6 Ra up to 5.3 Ra at U Mostku. A decrease in 3He/4He ratios was observed prior to seismic events due to stress accumulation before rupturing, and also after the events due to the release of crustal-derived components within the area of the focal zone. Due to the higher ‘helium baseline content’ of the Kopanina gas the 3He/4He ratios decreased there only from 4.6 to 4.5 Ra. At the Wettinquelle, the most distant fr

P-SV conversions provide new insights into the lithosphere of the western Eger (Ohře) Rift, a presently active CO2 emanation area, Quaternary volcanic field, and earthquake swarm region in central Europe. Gas and isotope (He and C) mapping of free gas phases in mineral springs and mofettes proved the origin of CO2- dominated gases from a subcrustal magmatic fluid reservoir. Analyzing teleseismic data from several seismic networks in the western Bohemian Massif, the source region of these gases was investigated. Moho Ps conversions have 3 to 4.5 s delay. Crustal thicknesses vary between 27 and 38 km; v p /v s ratios vary between 1.63 and 1.81. Beneath the western Eger Rift an approximately 40 km wide Moho updoming up to 27 km exists. Locally observed weak conversions indicate a complex Moho transition zone in this area. A local “6 s phase” possibly originates at a discontinuity in approximately 50 to 60 km depth or may represent multiples from velocity inversions at the base of the upper crust. Moho updoming and the distribution of the “6 s phase” coincide with the CO2 degassing fields and the positions of Quaternary volcanoes at the surface. We hypothesize the release of CO2-dominated fluid/magma from isolated melt reservoirs in the depth range of 60 to 30 km, separation of CO2 from the melt at 29 to 21 km depths, and CO2 transport through the crust. The geophysical indications may point to presently active magmatic underplating beneath the study area, supporting the results of gas geochemical and isotope investigations. This is the first attempt that combines seismic and gas geochemical data for a tectonic model. Our model may be transferable to other continental rift areas worldwide.

A portion of a study of intra-plate seismicity, alkaline magmatism and other tectonism post-dating continental separation related to the tectonics of the French test site in Algeria. This study shows that the test site is not in the middle of a shield area. The tectonic setting is significant in some studies of the estimation of yield from seismic amplitude. A study is underway to determine how well the source parameters of an earthquake can be prescribed by a limited number of seismic stations. Both WWSSN and VLP stations are being used, but emphasis is being placed on the VLP data. Earthquakes from a Mid- Atlantic Ridge swarm are being used as the basic data set. A study of the velocity structure under the Tibetan Plateau using normal and higher mode surface waves recorded by nearby WWSSN stations.