Search

This paper reports on comprehensive efforts on uncertainty quantification and global sensitivity analysis for accelerator cavity design. As a case study object the TESLA shaped superconducting cavities, as produced for the European X-ray Free Electron Laser (EXFEL), are selected. The choice for these cavities is explained by the available measurement data that can be leveraged to substantiate the simulation model. Each step of the manufacturing chain is documented together with the involved uncertainties. Several of these steps are mimicked on the simulation side, e.g. by introducing a random eigenvalue problem. The uncertainties are then quantified numerically and in particular the sensitivities give valuable insight into the systems behavior. We also compare these findings to purely statistical studies carried out for the manufactured cavities. More advanced, adaptive, surrogate modeling techniques are adopted, which are crucial to incorporate a large number of uncertain parameters. The main contribution is the detailed comparison and fusion of measurement results for the EXFEL cavities on the one hand and simulation based uncertainty studies on the other hand. After introducing the quantities of physical interest for accelerator cavities and the Maxwell eigenvalue problem, the details on the manufacturing of the EXFEL cavities and measurements are reported. This is followed by uncertainty modeling with quantification studies.

This paper discusses and analyses two domain decomposition approaches for electromagnetic problems that allow the combination of domains discretised by either N\'ed\'elec-type polynomial finite elements or spline-based isogeometric analysis. The first approach is a new isogeometric mortar method and the second one is based on a modal basis for the Lagrange multiplier space, called state-space concatenation in the engineering literature. Spectral correctness and in particular inf-sup stability of both approaches are analytically and numerically investigated. The new mortar method is shown to be unconditionally stable. Its construction of the discrete Lagrange multiplier space takes advantage of the high continuity of splines, and does not have an analogue for N\'ed\'elec finite elements. On the other hand, the approach with modal basis is easier to implement but relies on application knowledge to ensure stability and correctness.

The electromagnetic field distribution as well as the resonating frequency of various modes in superconducting cavities used in particle accelerators for example are sensitive to small geometry deformations. The occurring variations are motivated by measurements of an available set of resonators from which we propose to extract a small number of relevant and independent deformations by using a truncated Karhunen-Lo\`eve expansion. The random deformations are used in an expressive uncertainty quantification workflow to determine the sensitivity of the eigenmodes. For the propagation of uncertainty, a stochastic collocation method based on sparse grids is employed. It requires the repeated solution of Maxwell's eigenvalue problem at predefined collocation points, i.e., for cavities with perturbed geometry. The main contribution of the paper is ensuring the consistency of the solution, i.e., matching the eigenpairs, among the various eigenvalue problems at the stochastic collocation points. To this end, a classical eigenvalue tracking technique is proposed that is based on homotopies between collocation points and a Newton-based eigenvalue solver. The approach can be efficiently parallelized while tracking the eigenpairs. In this paper, we propose the application of isogeometric analysis since it allows for the exact description of the geometrical domains with respect to common computer-aided design kernels, for a straightforward and convenient way of handling geometrical variations and smooth solutions.

This work addresses the application of Isogeometric Analysis to the simulation of particle accelerator cavities and other electromagnetic devices whose performance is mainly determined by their geometry. By exploiting the properties of B-Spline and Non-Uniform B-Spline basis functions, the Isogeometric approximation allows for the correct discretisation of the spaces arising from Maxwell's equations and for the exact representation of the computational domain. This choice leads to substantial improvements in both the overall accuracy and computational effort. The suggested framework is applied to the evaluation of the sensitivity of these devices with respect to geometrical changes using Uncertainty Quantification methods and to shape optimisation processes. The particular choice of basis functions simplifies the construction of the geometry deformations significantly. Finally, substructuring methods are proposed to further reduce the computational cost due to matrix assembly and to allow for hybrid coupling of Isogeometric Analysis and more classical Finite Element Methods. Considerations regarding the stability of such methods are addressed. The methods are illustrated by simple numerical tests and real world device simulations with particular emphasis on particle accelerator cavities.

In this communication the advantages and drawbacks of the isogeometric analysis (IGA) are reviewed in the context of electromagnetic simulations. IGA extends the set of polynomial basis functions, commonly employed by the classical Finite Element Method (FEM). While identical to FEM with N\'ed\'elec's basis functions in the lowest order case, it is based on B-spline and Non-Uniform Rational B-spline basis functions. The main benefit of this is the exact representation of the geometry in the language of computer aided design (CAD) tools. This simplifies the meshing as the computational mesh is implicitly created by the engineer using the CAD tool. The curl- and div-conforming spline function spaces are recapitulated and the available software is discussed. Finally, several non-academic benchmark examples in two and three dimensions are shown which are used in optimization and uncertainty quantification workflows., Comment: submitted to the ICS Newsletter

Isogeometric analysis (IGA) is used to simulate a permanent magnet synchronous machine. IGA uses non-uniform rational B-splines to parametrise the domain and to approximate the solution space, thus allowing for the exact description of the geometries even on the coarsest level of mesh refinement. Given the properties of the isogeometric basis functions, this choice guarantees a higher accuracy than the classical finite element method. For dealing with the different stator and rotor topologies, the domain is split into two non-overlapping parts on which Maxwell's equations are solved independently in the context of a classical Dirichlet-to-Neumann domain decomposition scheme. The results show good agreement with the ones obtained by the classical finite element approach., Comment: 4 pages, 7 figures, 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering, 14-16 September 2017, Lodz, Poland

This work addresses the application of Isogeometric Analysis to the simulation of particle accelerator cavities and other electromagnetic devices whose performance is mainly determined by their geometry. By exploiting the properties of B-Spline and Non-Uniform B-Spline basis functions, the Isogeometric approximation allows for the correct discretisation of the spaces arising from Maxwell's equations and for the exact representation of the computational domain. This choice leads to substantial improvements in both the overall accuracy and computational effort. The suggested framework is applied to the evaluation of the sensitivity of these devices with respect to geometrical changes using Uncertainty Quantification methods and to shape optimisation processes. The particular choice of basis functions simplifies the construction of the geometry deformations significantly. Finally, substructuring methods are proposed to further reduce the computational cost due to matrix assembly and to allow for hybrid coupling of Isogeometric Analysis and more classical Finite Element Methods. Considerations regarding the stability of such methods are addressed. The methods are illustrated by simple numerical tests and real world device simulations with particular emphasis on particle accelerator cavities.

This work addresses the application of Isogeometric Analysis to the simulation of particle accelerator cavities and other electromagnetic devices whose performance is mainly determined by their geometry. By exploiting the properties of B-Spline and Non-Uniform B-Spline basis functions, the Isogeometric approximation allows for the correct discretisation of the spaces arising from Maxwell's equations and for the exact representation of the computational domain. This choice leads to substantial improvements in both the overall accuracy and computational effort. The suggested framework is applied to the evaluation of the sensitivity of these devices with respect to geometrical changes using Uncertainty Quantification methods and to shape optimisation processes. The particular choice of basis functions simplifies the construction of the geometry deformations significantly. Finally, substructuring methods are proposed to further reduce the computational cost due to matrix assembly and to allow for hybrid coupling of Isogeometric Analysis and more classical Finite Element Methods. Considerations regarding the stability of such methods are addressed. The methods are illustrated by simple numerical tests and real world device simulations with particular emphasis on particle accelerator cavities.

In the design of electromagnetic devices the accurate representation of the geometry plays a crucial role in determining the device performance. For accelerator cavities, in particular, controlling the frequencies of the eigenmodes is important in order to guarantee the synchronization between the electromagnetic field and the accelerated particles. The main interest of this work is in the evaluation of eigenmode sensitivities with respect to geometrical changes using Monte Carlo simulations and stochastic collocation. The choice of an IGA approach for the spatial discretization allows for an exact handling of the domains and their deformations, guaranteeing, at the same time, accurate and highly regular solutions.

This work addresses the application of Isogeometric Analysis to the simulation of particle accelerator cavities and other electromagnetic devices whose performance is mainly determined by their geometry. By exploiting the properties of B-Spline and Non-Uniform B-Spline basis functions, the Isogeometric approximation allows for the correct discretisation of the spaces arising from Maxwell's equations and for the exact representation of the computational domain. This choice leads to substantial improvements in both the overall accuracy and computational effort. The suggested framework is applied to the evaluation of the sensitivity of these devices with respect to geometrical changes using Uncertainty Quantification methods and to shape optimisation processes. The particular choice of basis functions simplifies the construction of the geometry deformations significantly. Finally, substructuring methods are proposed to further reduce the computational cost due to matrix assembly and to allow for hybrid coupling of Isogeometric Analysis and more classical Finite Element Methods. Considerations regarding the stability of such methods are addressed. The methods are illustrated by simple numerical tests and real world device simulations with particular emphasis on particle accelerator cavities.