Search

In the past decade, inverter-integrated energy sources have experienced rapid growth, which leads to operating challenges associated with reduced system inertia and intermittent power generation, which can cause instability and performance issues of the power system. Improved control schemes for inverters are necessary to ensure the stability and resilience of the power system. Grid-forming inverters dampen frequency fluctuations in the power system, while grid-following inverters can aggravate frequency problems with increased penetration. This paper aims at reviewing the role of grid-forming inverters in the power system, including their topology, control strategies, challenges, sizing, and location. In order to facilitate continued research in this field, a comprehensive literature review and classification of the studies are conducted, followed by research gaps and suggestions for future studies.

In the past decade, inverter-integrated energy sources have experienced rapid growth, which leads to operating challenges associated with reduced system inertia and intermittent power generation, which can cause instability and performance issues of the power system. Improved control schemes for inverters are necessary to ensure the stability and resilience of the power system. Grid-forming inverters dampen frequency fluctuations in the power system, while grid-following inverters can aggravate frequency problems with increased penetration. This paper aims at reviewing the role of grid-forming inverters in the power system, including their topology, control strategies, challenges, sizing, and location. In order to facilitate continued research in this field, a comprehensive literature review and classification of the studies are conducted, followed by research gaps and suggestions for future studies.

In the past decade, inverter-integrated energy sources have experienced rapid growth, which leads to operating challenges associated with reduced system inertia and intermittent power generation, which can cause instability and performance issues of the power system. Improved control schemes for inverters are necessary to ensure the stability and resilience of the power system. Grid-forming inverters dampen frequency fluctuations in the power system, while grid-following inverters can aggravate frequency problems with increased penetration. This paper aims at reviewing the role of grid-forming inverters in the power system, including their topology, control strategies, challenges, sizing, and location. In order to facilitate continued research in this field, a comprehensive literature review and classification of the studies are conducted, followed by research gaps and suggestions for future studies.

In the past decade, inverter-integrated energy sources have experienced rapid growth, which leads to operating challenges associated with reduced system inertia and intermittent power generation, which can cause instability and performance issues of the power system. Improved control schemes for inverters are necessary to ensure the stability and resilience of the power system. Grid-forming inverters dampen frequency fluctuations in the power system, while grid-following inverters can aggravate frequency problems with increased penetration. This paper aims at reviewing the role of grid-forming inverters in the power system, including their topology, control strategies, challenges, sizing, and location. In order to facilitate continued research in this field, a comprehensive literature review and classification of the studies are conducted, followed by research gaps and suggestions for future studies.

In the past decade, inverter-integrated energy sources have experienced rapid growth, which leads to operating challenges associated with reduced system inertia and intermittent power generation, which can cause instability and performance issues of the power system. Improved control schemes for inverters are necessary to ensure the stability and resilience of the power system. Grid-forming inverters dampen frequency fluctuations in the power system, while grid-following inverters can aggravate frequency problems with increased penetration. This paper aims at reviewing the role of grid-forming inverters in the power system, including their topology, control strategies, challenges, sizing, and location. In order to facilitate continued research in this field, a comprehensive literature review and classification of the studies are conducted, followed by research gaps and suggestions for future studies.

Power fluctuations induced by wave energy converters (WECs) may reflect negative impact on the power quality of the power grid. Assessing their impact is an important step to ensure the grid compliance level of the energy park. The IEC 61000-4-15 standard classifies the allowable disturbances in the grid. This study analysed and assessed the grid impact in terms of flicker, harmonic distortion and voltage variations. The assessments were performed without energy storage and compared when using the energy storage. A single WEC is emulated as an irregular power output of a real WEC using a combined model of power take-off in the Simulink model. Time series based on data obtained in earlier offshore experiments, conducted at the Lysekil research site in Sweden, is used to emulate a wave energy park (WEP) power in a land-based test rig in real-time power hardware-in-the-loop simulations. A total of three and ten WECs are emulated by introducing a time delay in the time series to investigate the grid impact in each layout. Flicker emissions, voltage variations, individual and total harmonics of the voltage at the connection point in each layout are studied and compared with the limits to be grid compliant for layouts of the WEP. In addition, voltage and current harmonics for the single WEC and individual harmonics in each phase of the voltage are measured and analysed to assess the compliance level of the WEP.

Power fluctuations induced by wave energy converters (WECs) may reflect negative impact on the power quality of the power grid. Assessing their impact is an important step to ensure the grid compliance level of the energy park. The IEC 61000-4-15 standard classifies the allowable disturbances in the grid. This study analysed and assessed the grid impact in terms of flicker, harmonic distortion and voltage variations. The assessments were performed without energy storage and compared when using the energy storage. A single WEC is emulated as an irregular power output of a real WEC using a combined model of power take-off in the Simulink model. Time series based on data obtained in earlier offshore experiments, conducted at the Lysekil research site in Sweden, is used to emulate a wave energy park (WEP) power in a land-based test rig in real-time power hardware-in-the-loop simulations. A total of three and ten WECs are emulated by introducing a time delay in the time series to investigate the grid impact in each layout. Flicker emissions, voltage variations, individual and total harmonics of the voltage at the connection point in each layout are studied and compared with the limits to be grid compliant for layouts of the WEP. In addition, voltage and current harmonics for the single WEC and individual harmonics in each phase of the voltage are measured and analysed to assess the compliance level of the WEP.

Power fluctuations induced by wave energy converters (WECs) may reflect negative impact on the power quality of the power grid. Assessing their impact is an important step to ensure the grid compliance level of the energy park. The IEC 61000-4-15 standard classifies the allowable disturbances in the grid. This study analysed and assessed the grid impact in terms of flicker, harmonic distortion and voltage variations. The assessments were performed without energy storage and compared when using the energy storage. A single WEC is emulated as an irregular power output of a real WEC using a combined model of power take-off in the Simulink model. Time series based on data obtained in earlier offshore experiments, conducted at the Lysekil research site in Sweden, is used to emulate a wave energy park (WEP) power in a land-based test rig in real-time power hardware-in-the-loop simulations. A total of three and ten WECs are emulated by introducing a time delay in the time series to investigate the grid impact in each layout. Flicker emissions, voltage variations, individual and total harmonics of the voltage at the connection point in each layout are studied and compared with the limits to be grid compliant for layouts of the WEP. In addition, voltage and current harmonics for the single WEC and individual harmonics in each phase of the voltage are measured and analysed to assess the compliance level of the WEP.

Power fluctuations induced by wave energy converters (WECs) may reflect negative impact on the power quality of the power grid. Assessing their impact is an important step to ensure the grid compliance level of the energy park. The IEC 61000-4-15 standard classifies the allowable disturbances in the grid. This study analysed and assessed the grid impact in terms of flicker, harmonic distortion and voltage variations. The assessments were performed without energy storage and compared when using the energy storage. A single WEC is emulated as an irregular power output of a real WEC using a combined model of power take-off in the Simulink model. Time series based on data obtained in earlier offshore experiments, conducted at the Lysekil research site in Sweden, is used to emulate a wave energy park (WEP) power in a land-based test rig in real-time power hardware-in-the-loop simulations. A total of three and ten WECs are emulated by introducing a time delay in the time series to investigate the grid impact in each layout. Flicker emissions, voltage variations, individual and total harmonics of the voltage at the connection point in each layout are studied and compared with the limits to be grid compliant for layouts of the WEP. In addition, voltage and current harmonics for the single WEC and individual harmonics in each phase of the voltage are measured and analysed to assess the compliance level of the WEP.

Power fluctuations induced by wave energy converters (WECs) may reflect negative impact on the power quality of the power grid. Assessing their impact is an important step to ensure the grid compliance level of the energy park. The IEC 61000-4-15 standard classifies the allowable disturbances in the grid. This study analysed and assessed the grid impact in terms of flicker, harmonic distortion and voltage variations. The assessments were performed without energy storage and compared when using the energy storage. A single WEC is emulated as an irregular power output of a real WEC using a combined model of power take-off in the Simulink model. Time series based on data obtained in earlier offshore experiments, conducted at the Lysekil research site in Sweden, is used to emulate a wave energy park (WEP) power in a land-based test rig in real-time power hardware-in-the-loop simulations. A total of three and ten WECs are emulated by introducing a time delay in the time series to investigate the grid impact in each layout. Flicker emissions, voltage variations, individual and total harmonics of the voltage at the connection point in each layout are studied and compared with the limits to be grid compliant for layouts of the WEP. In addition, voltage and current harmonics for the single WEC and individual harmonics in each phase of the voltage are measured and analysed to assess the compliance level of the WEP.

To our knowledge, this paper represents an initial study of a novel concept in freshwater and lithium extraction from desalination powered off-grid by marine renewable energy sources. The project's background is interest in the local supply of lithium for the growing numbers of electric vehicles. The desalination technologies investigated are reverse osmosis and electrodialysis. The collocation of the marine resources, possibly available and future technical solutions, and demands for freshwater and lithium suggest that the proposed system could be interesting to study further.

Connecting more non-dispatchable renewable energy sources (RESs) will result in a higher power variability and a lower system inertia when the synchronous generators are replaced by inverter-connected RES. Inverter control can be divided in three categories: grid-following, grid-forming (GFM) and grid-supporting. A literature review of inverter control strategies identifies the GFM control as having an important role in maintaining system stability assuming near 100 % inverter-connected RES. Critical aspects of the inverter control are also identified; the control need to function autonomously, be able to remain connected during transient events and be insensitive to grid topology. Combining various RES is also shown to improve system stability. The combination of RES that has been investigated in most studies is wind, solar and wave power. Wave power is still a young technology compared to solar and wind power. It generates higher power fluctuations over short time periods with a significant difference between average and maximum power. Additionally, wave power parks (WPPs) are often connected via long cables which contribute reactive power to the grid. These challenges has to be considered to maintain system stability and power quality when connecting a WPP to the grid. In a Power Hardware-In-the-Loop study of how a WPP affects the power quality at the point of common coupling (PCC), it is found that the impact is highest for WPPs with fewer generators as the variability is reduced when several generators are excited at different times. Energy storage is also shown to have a significant impact on the power quality at the PCC with reduced flicker, total harmonic distortion and power and voltage variability. A simulation study also shows the positive impact of energy storage on power variability and the role of inverter control in reactive power compensation.

Connecting more non-dispatchable renewable energy sources (RESs) will result in a higher power variability and a lower system inertia when the synchronous generators are replaced by inverter-connected RES. Inverter control can be divided in three categories: grid-following, grid-forming (GFM) and grid-supporting. A literature review of inverter control strategies identifies the GFM control as having an important role in maintaining system stability assuming near 100 % inverter-connected RES. Critical aspects of the inverter control are also identified; the control need to function autonomously, be able to remain connected during transient events and be insensitive to grid topology. Combining various RES is also shown to improve system stability. The combination of RES that has been investigated in most studies is wind, solar and wave power. Wave power is still a young technology compared to solar and wind power. It generates higher power fluctuations over short time periods with a significant difference between average and maximum power. Additionally, wave power parks (WPPs) are often connected via long cables which contribute reactive power to the grid. These challenges has to be considered to maintain system stability and power quality when connecting a WPP to the grid. In a Power Hardware-In-the-Loop study of how a WPP affects the power quality at the point of common coupling (PCC), it is found that the impact is highest for WPPs with fewer generators as the variability is reduced when several generators are excited at different times. Energy storage is also shown to have a significant impact on the power quality at the PCC with reduced flicker, total harmonic distortion and power and voltage variability. A simulation study also shows the positive impact of energy storage on power variability and the role of inverter control in reactive power compensation.

The energy efficiency of three different powertrains is investigated in a well-to-wheel (WTW) analysis including all the steps from raw gas to wheel. The investigation is done on a bus during different drive cycles; inner-city traffic, rural traffic, constant speed + one stop and constant speed. The powertrains investigated are battery electric motor, internal combustion engine and a simplified hybrid powertrain (only accounting for the savings from regenerative braking). The study is done in two steps, well-to-tank (WTT) which is based on literature research and tank-to-wheel (TTW) which is based on Scania specific data.As a complement to the energy efficiency analysis a partial cradle-to-gate study on the energy consumption during battery manufacturing is done. This to investigate the impact the batteries in the battery electric vehicle (BEV) have during their lifetime.The study show that the BEV is the most energy efficient option, but the difference varies a lot depending on the drive cycle. The BEV performs best in the inner-city traffic drive cycle where it is almost twice as energy efficient as the internal combustion vehicle (ICV) and uses about 30 \% less energy than the hybrid electric vehicle (HEV). The ICV and HEV compare better with the BEV for drive cycles with higher speeds and fewer stops. In the rural- and inner city drive cycles the regenerative braking savings are between 17 and 28 %. The energy consumption of the battery manufacturing does not prove to have a significant impact over the batteries life time, consisting of only 1 - 2.6 % of the total energy consumption of the BEV during a drive cycle.The results of this study should not be interpreted as an indication of the best way to use biogas. The comparison is only done on the energy efficiency and does not include economic factors such as energy- and vehicle prices which might influence the feasibility of the result.The study does not cover other well-to-wheel aspects than energy efficiency., Validerat; 20160621 (global_studentproject_submitter)