Search

The use of millimeter-wave (mm-wave) frequencies is required in order to support the increasing number of connected devices expected from the fifth generation (5G) of mobile communications. Subsequently, the generation of radio-frequency (RF) carriers ranging from 10 GHz to 300 GHz and their transport through optical distribution network (ODN) is a key element of the future 5G fronthaul. Optically assisted RF carrier generation is one of the most promising solutions to tackle this issue, allowing a wide use of analog radio-over-fiber (ARoF) architectures. However the main limitation of these optical methods is related to the finite coherence of lasers sources, which can dramatically degrade data transmission in analog formats. To mitigate its impact, the use of orthogonal frequency-division multiplexing (OFDM) as the 5G standard allows employing efficient phase noise compensation algorithms. Therefore, in this study, we present an experimental demonstration of a mm-wave generation technique based on an optical phase-locked loop (OPLL) that fulfills the frequency specifications for 5G. Then, an algorithm is introduced that improves data recovery at reception and reduces the impact of a possible high phase noise carrier. Finally, a back-to-back data transmission experiment is performed, demonstrating the efficiency of the algorithm to reach the 5G requirements. These results emphasize the use of OPLLs as a viable solution to generate mm-wave carriers for 5G and beyond.

Analog beamforming is a key technology to enable millimeter-wave (mm-wave) mobile communications. Nonetheless, the most widespread beamforming solutions are based on electrical implementation, which is inefficient in terms of power consumption, signal bandwidth, and losses. Optical beamforming is a promising alternative for future mm-wave mobile communications due to its inherent benefits, such as large bandwidth, low cross-talk, and low losses. Optical beamforming networks (OBFN) are an outstanding technique to simultaneously generate and radiate multiple beams in an effective manner. True time delays (TTDs) based on optical waveguides are an attractive solution since they offer constant delay in the spectrum to avoid beam squint and allow highly scalable OBFN implementation. In this work, for the first time to the best of the authors' knowledge, an incoherent 4x4 OBFN based on optical waveguides and capable of simultaneously generating four beams is presented, including a thorough explanation of its operating principles and providing a detailed characterization. The presented OBFN is fabricated on Si3N4 photonic integrated circuit (PIC), and designed for transmission at 27.5 GHz, within the n257 5G band. Furthermore, the building blocks forming the OBFN PIC are deeply explained, providing their corresponding theoretical formulation and key design parameters. The fabricated PIC is exhaustively characterized through all its building blocks, showing in detail the realized measurement procedure. The experimental measures match the design parameters with minimal error, showing the feasibility of fabricating future OBFNs with the same technology and topology for larger antenna arrays. The experimental results corroborate the viability of the presented OBFN architecture as an excellent technology to consider in future mm-wave 5G/6G networks. The contribution of this work paves the road to turn optical beamforming into a mature, scalable, and efficient technology.

The use of millimeter-wave (mm-wave) frequencies is required in order to support the increasing number of connected devices expected from the fifth generation (5G) of mobile communications. Subsequently, the generation of radio-frequency (RF) carriers ranging from 10 GHz to 300 GHz and their transport through optical distribution network (ODN) is a key element of the future 5G fronthaul. Optically assisted RF carrier generation is one of the most promising solutions to tackle this issue, allowing a wide use of analog radio-over-fiber (ARoF) architectures. However the main limitation of these optical methods is related to the finite coherence of lasers sources, which can dramatically degrade data transmission in analog formats. To mitigate its impact, the use of orthogonal frequency-division multiplexing (OFDM) as the 5G standard allows employing efficient phase noise compensation algorithms. Therefore, in this study, we present an experimental demonstration of a mm-wave generation technique based on an optical phase-locked loop (OPLL) that fulfills the frequency specifications for 5G. Then, an algorithm is introduced that improves data recovery at reception and reduces the impact of a possible high phase noise carrier. Finally, a back-to-back data transmission experiment is performed, demonstrating the efficiency of the algorithm to reach the 5G requirements. These results emphasize the use of OPLLs as a viable solution to generate mm-wave carriers for 5G and beyond.

Fifth-generation mobile networks (5G) is the established solution to satisfy the highly demanding key performance indicators such as traffic volumes, bit-rate, latency, and power consumption, among others of the future telecommunication infrastructure. The already saturated sub-6 GHz spectral band does not accommodate such requirements and forces the move towards higher frequencies, with the millimeter-wave (mm-wave) domain being an adequate band to operate. However, the exploitation of mm-wave signals in the mobile cells implies the deployment of an enormous quantity of small cells with associated equipment, footprint, and control. Thus, analog radio-over-fiber (ARoF) emerges as a suitable technology because of their attractive benefits such as low latency, low hardware complexity, and reduced power consumption. However, through investigation of experimental ARoF systems adhering to the 5G standard is scarce. Therefore, in this work, a novel and efficient bidirectional ARoF scheme based on multicore fiber (MCF) and oriented to 5G mm-wave communications is proposed and experimentally validated. The setup configurations are according to the 5G standard, enabling a wireless link at 26 GHz (n258, K-band) and time division duplex (TDD) communication. The proposed scheme is thoroughly evaluated under all the 5G numerologies and with different bandwidth settings. Moreover, key design considerations of the experimental testbed are explained and discussed to optimize the final yields of the system. The experimental results of both transmission directions are compared and analyzed, and prove the viability of the proposed bidirectional ARoF system as an excellent solution to be part of the future 5G mm-wave network.

Analog radio-over-fiber (ARoF) technology has proven to be a promising solution to be part of the future millimeter-wave (mm-wave) 5G/6G architecture due to its attractive benefits such as simplified remote antenna units (RAUs), low-power consumption, and low cost. However, ARoF channels present hefty drawbacks, such as phase noise and nonlinear effects, that need to be addressed. The probabilistic amplitude shaping (PAS) technique is able to reduce the impact of such drawbacks, allowing a fine optimization of channel capacity usage. In particular, enumerative sphere shaping (ESS) implementation stands out as an excellent PAS approach because of its energy-efficiency and low complexity for short blocklengths. In this work, for the first time to the best of our knowledge, an ESS scheme is evaluated in an experimental bidirectional mm-wave ARoF setup oriented towards 5G communications. Furthermore, a novel soft ESS demapping algorithm is proposed and explained. The experimental results confirm the ESS technique, together with the proposed algorithm, as a convenient solution to enhance the channel capacity use of mm-wave ARoF systems for the 5G/6G fronthaul.

Fifth-generation mobile networks (5G) is the established solution to satisfy the highly demanding key performance indicators such as traffic volumes, bit-rate, latency, and power consumption, among others of the future telecommunication infrastructure. The already saturated sub-6 GHz spectral band does not accommodate such requirements and forces the move towards higher frequencies, with the millimeter-wave (mm-wave) domain being an adequate band to operate. However, the exploitation of mm-wave signals in the mobile cells implies the deployment of an enormous quantity of small cells with associated equipment, footprint, and control. Thus, analog radio-over-fiber (ARoF) emerges as a suitable technology because of their attractive benefits such as low latency, low hardware complexity, and reduced power consumption. However, through investigation of experimental ARoF systems adhering to the 5G standard is scarce. Therefore, in this work, a novel and efficient bidirectional ARoF scheme based on multicore fiber (MCF) and oriented to 5G mm-wave communications is proposed and experimentally validated. The setup configurations are according to the 5G standard, enabling a wireless link at 26 GHz (n258, K-band) and time division duplex (TDD) communication. The proposed scheme is thoroughly evaluated under all the 5G numerologies and with different bandwidth settings. Moreover, key design considerations of the experimental testbed are explained and discussed to optimize the final yields of the system. The experimental results of both transmission directions are compared and analyzed, and prove the viability of the proposed bidirectional ARoF system as an excellent solution to be part of the future 5G mm-wave network.

Analog radio-over-fiber (ARoF) technology has proven to be a promising solution to be part of the future millimeter-wave (mm-wave) 5G/6G architecture due to its attractive benefits such as simplified remote antenna units (RAUs), low-power consumption, and low cost. However, ARoF channels present hefty drawbacks, such as phase noise and nonlinear effects, that need to be addressed. The probabilistic amplitude shaping (PAS) technique is able to reduce the impact of such drawbacks, allowing a fine optimization of channel capacity usage. In particular, enumerative sphere shaping (ESS) implementation stands out as an excellent PAS approach because of its energy-efficiency and low complexity for short blocklengths. In this work, for the first time to the best of our knowledge, an ESS scheme is evaluated in an experimental bidirectional mm-wave ARoF setup oriented towards 5G communications. Furthermore, a novel soft ESS demapping algorithm is proposed and explained. The experimental results confirm the ESS technique, together with the proposed algorithm, as a convenient solution to enhance the channel capacity use of mm-wave ARoF systems for the 5G/6G fronthaul.

We experimentally analyze the ARoF based on OPLL mm-Wave generation performance for 5G fronthaul. Remarkable performance improvements are achieved for all 5G NR numerologies and different OPLL configurations despite their inherently high phase noise level.

This work studies and experimentally evaluates the performance enhancement by using PS-OFDM in a 5G mm-Wave ARoF system at 25 GHz for all 5G numerologies and with different phase noise levels.

This paper presents a beyond 5G fronthaul network with dynamic beamforming and -steering. The proposed fronthaul solution deploys optical beamforming (OBF) by combining space division multiplexing (SDM), analogue radio-over-fiber (ARoF), and the novel optical beam forming network (OBFN) technologies. From the service management and orchestration (MANO) point of view, the proposed fronthaul solution also deploys an advanced software defined networking (SDN) and Network Function Virtualization (NFV) control and orchestration architecture developed with the goal to optimally manage and reconfigure the physical layer resources (i.e., optical and radio) at the central office and cell sites (i.e., pool of baseband units (BBUs), remote radio heads (RRHs), ARoF transceivers and OBFNs). The proposed beyond 5G fronthaul architecture is primarily oriented to deploy massive machine-type communication (mMTC) services with high-bandwidth requirements, such as for industry 4.0. In this paper we experimentally validate the novel OBFN system, and the dynamic SDN/NFV MANO of the transport connectivity and network services for optical beamforming. The obtained experimental results show that the overall delay for the provisioning and removal of an OBF service, considering the contribution of the involved optical and radio systems and the SDN/NFV MANO layer, is 134s and 18s respectively. The reconfiguration of the OBF service to add or remove a beam can be performed in the range of 65-87s.

Fifth-generation mobile networks (5G) are the solution for the demanding mobile traffic requirements, providing technologies that fulfill the requisites of different type of services. The utilization of the millimeter-wave (mm-wave) band is the straightforward technique to achieve high bit rates. Moreover, analog radio-over-fiber (ARoF) brings outstanding benefits such as low cost, low power consumption, and high spectral efficiency, among others. Thereby, mm-wave ARoF is a strong candidate to pave the way for common public radio interface (CPRI) in the fronthaul for the future 5G architecture. As orthogonal frequency-division multiplexing (OFDM) is the adopted waveform in the 5G standard, it should be also utilized in mm-wave ARoF systems for 5G. However, phase noise is one of the most degrading factors in mm-wave OFDM ARoF systems. Therefore, in this work, an analysis of the phase noise is carried out through an experimental setup up. The configuration of this setup enables to gradually modify the final phase noise level of the system. Furthermore, an original and novel algorithm to compensate the phase noise in OFDM receivers is proposed. The performance of this algorithm is experimentally evaluated through the setup for different phase noise levels and different subcarrier spacings. The obtained results show the effectiveness of the proposed algorithm under those conditions, highlighting the viability of mm-wave OFDM ARoF for 5G and beyond.

Fifth generation (5G) is the emerging mobile communications platform that aims to meet the market requirements in terms of enhanced broadband connectivity based on harnessing small cell and mmWave technology. These two in synergy will provide high capacity gain not only through the hyperdense deployment of small cell but also through accessing large swathes of untapped spectrum at mmWave frequencies. The envisaged architecture entails an integrated optical wireless network architecture, where optical technology will complement radio in order to handle the new demands on capacity over the backhaul and fronthaul network, leading to the notion of analog radio over fiber (ARoF). The goal of this chapter is to provide novel approaches to optimize the performances of mmWave ARoF systems that includes developing enabling technology from a digital to signal processing (DSP) and device perspective.

Fifth generation (5G) is the emerging mobile communications platform that aims to meet the market requirements in terms of enhanced broadband connectivity based on harnessing small cell and mmWave technology. These two in synergy will provide high capacity gain not only through the hyperdense deployment of small cell but also through accessing large swathes of untapped spectrum at mmWave frequencies. The envisaged architecture entails an integrated optical wireless network architecture, where optical technology will complement radio in order to handle the new demands on capacity over the backhaul and fronthaul network, leading to the notion of analog radio over fiber (ARoF). The goal of this chapter is to provide novel approaches to optimize the performances of mmWave ARoF systems that includes developing enabling technology from a digital to signal processing (DSP) and device perspective.

We experimentally analyze the ARoF based on OPLL mm-Wave generation performance for 5G fronthaul. Remarkable performance improvements are achieved for all 5G NR numerologies and different OPLL configurations despite their inherently high phase noise level.

This work studies and experimentally evaluates the performance enhancement by using PS-OFDM in a 5G mm-Wave ARoF system at 25 GHz for all 5G numerologies and with different phase noise levels.

This paper presents a beyond 5G fronthaul network with dynamic beamforming and -steering. The proposed fronthaul solution deploys optical beamforming (OBF) by combining space division multiplexing (SDM), analogue radio-over-fiber (ARoF), and the novel optical beam forming network (OBFN) technologies. From the service management and orchestration (MANO) point of view, the proposed fronthaul solution also deploys an advanced software defined networking (SDN) and Network Function Virtualization (NFV) control and orchestration architecture developed with the goal to optimally manage and reconfigure the physical layer resources (i.e., optical and radio) at the central office and cell sites (i.e., pool of baseband units (BBUs), remote radio heads (RRHs), ARoF transceivers and OBFNs). The proposed beyond 5G fronthaul architecture is primarily oriented to deploy massive machine-type communication (mMTC) services with high-bandwidth requirements, such as for industry 4.0. In this paper we experimentally validate the novel OBFN system, and the dynamic SDN/NFV MANO of the transport connectivity and network services for optical beamforming. The obtained experimental results show that the overall delay for the provisioning and removal of an OBF service, considering the contribution of the involved optical and radio systems and the SDN/NFV MANO layer, is 134s and 18s respectively. The reconfiguration of the OBF service to add or remove a beam can be performed in the range of 65-87s.

Fifth-generation mobile networks (5G) are the solution for the demanding mobile traffic requirements, providing technologies that fulfill the requisites of different type of services. The utilization of the millimeter-wave (mm-wave) band is the straightforward technique to achieve high bit rates. Moreover, analog radio-over-fiber (ARoF) brings outstanding benefits such as low cost, low power consumption, and high spectral efficiency, among others. Thereby, mm-wave ARoF is a strong candidate to pave the way for common public radio interface (CPRI) in the fronthaul for the future 5G architecture. As orthogonal frequency-division multiplexing (OFDM) is the adopted waveform in the 5G standard, it should be also utilized in mm-wave ARoF systems for 5G. However, phase noise is one of the most degrading factors in mm-wave OFDM ARoF systems. Therefore, in this work, an analysis of the phase noise is carried out through an experimental setup up. The configuration of this setup enables to gradually modify the final phase noise level of the system. Furthermore, an original and novel algorithm to compensate the phase noise in OFDM receivers is proposed. The performance of this algorithm is experimentally evaluated through the setup for different phase noise levels and different subcarrier spacings. The obtained results show the effectiveness of the proposed algorithm under those conditions, highlighting the viability of mm-wave OFDM ARoF for 5G and beyond.

Fifth-generation (5G) mobile networks consist of a range of novel technologies to fulfill different and exigent requirements and serve a wide range of services. To reach this, analog radio over fiber (ARoF) fronthaul with millimeter-wave (mm-wave) cells is a firm candidate to be part of the 5G architecture. Nonetheless, combined mm-wave and ARoF systems present new challenges such as high free-space path loss (FSPL), phase noise, chromatic dispersion, and other impairments. Therefore, the selection of the modulation format is crucial to reduce these effects and their impact. This work compares and analyzes different modulation formats in this type of system in order to choose the best waveform candidate for mm-wave 5G and beyond with ARoF fronthaul. An experimental comparison of OFDM, SC-FDM, UFMC, GFDM, and multi-CAP, shows that the standard OFDM may not be the best choice for mm-wave 5G.

Fifth-generation (5G) mobile networks consist of a range of novel technologies to fulfill different and exigent requirements and serve a wide range of services. To reach this, analog radio over fiber (ARoF) fronthaul with millimeter-wave (mm-wave) cells is a firm candidate to be part of the 5G architecture. Nonetheless, combined mm-wave and ARoF systems present new challenges such as high free-space path loss (FSPL), phase noise, chromatic dispersion, and other impairments. Therefore, the selection of the modulation format is crucial to reduce these effects and their impact. This work compares and analyzes different modulation formats in this type of system in order to choose the best waveform candidate for mm-wave 5G and beyond with ARoF fronthaul. An experimental comparison of OFDM, SC-FDM, UFMC, GFDM, and multi-CAP, shows that the standard OFDM may not be the best choice for mm-wave 5G.