Search

Water hyacinth (Eichhornia crassipes (Mart.) Solms) is a highly invasive aquatic weed native to the Amazonia basin, known for its rapid propagation, adaptability, and utilization in traditional medicine. The study aims to unveil the therapeutic potential of water hyacinth flowers methanolic extract (EC CME) and its four kupchan fractions (EC PESF, EC DCMSF, EC EASF, EC ASF) through diversified chemical-pharmacological approaches. GC-MS/MS of EC-CME uncovered a rich tapestry of 72 phytochemical components. In vitro DPPH scavenging assay and total phenolic content determination assay deciphered promising antioxidant assays with remarkably low IC 50 values of 0.353 and 0.485 μg/mL, respectively for EC-ESF and EC-ASF. Besides, different in vivo tests, including tail emersion, acetic acid-induced writhing, and thiopental-induced sleeping test of EC-CME, yielded a remarkable 8.61±0.29 min of tail immersion time compared to the control's 2.05±0.11 min at the highest dose (600 mg/kg). The best % inhibition of writhing was recorded as 47.96 % accrued in 400 mg/kg dose, indicating robust pain-relieving properties. The onset and duration of sleep are significantly ameliorated for EC-CME, unveiling its antidepressant potential. Besides, molecular docking studies along with ADME/T analysis also validated the wet lab findings as well as their safety, efficacy, and drug-likeliness profile. Finally, this work can be an essential hint for utilizing aquatic weeds in drug development research., (© 2024 Wiley-VHCA AG, Zurich, Switzerland.)

Three aquatic macrophytes were used to treat wastewater using a pilot-constructed wetland (CW) system to determine the most efficient plants for removing contaminants from wastewater. The three macrophytes are water hyacinth ( Eichhornia crassipes ), water lettuce ( Pistia stratiotes ), and duckweed ( Lemna minor ). Three 150 L capacity tanks with sand and gravel as substrates were used as the pilot CW for each plant. Upon initial examination, the raw wastewater was not compliant with standard discharge limits. The wastewater samples were collected every 7 days for 3 weeks for treatment. From the findings, at 14 days hydraulic retention time (HRT), E. crassipes and P. stratiotes achieved the highest total phosphorus (TP) and chemical oxygen deman (COD) reductions of 99.3 and 99.4%, respectively. E. crassipes indicated better biological oxygen demand removal efficiency of 91.3%, COD (85.0%), electrical conductivity (90.4%), total dissolved solids (89.7%), and total coliforms (66.0%). Albeit, P. stratiotes indicated better results for total suspended solids (96.2%), TP (7.55%), and E. coli (94.4%), while L. minor was better with 90.8% total nitrogen removal. The overall analysis showed E. crassipes to be more efficient than the three macrophytes. However, the other two plants are replaceable options and large-scale implementation of this project in the community would be a major contributor to actualizing SDG number 6., Competing Interests: The authors declare there is no conflict., (© 2024 The Authors This is an Open Access article distributed under the terms of the Creative Commons Attribution Licence (CC BY 4.0), which permits copying, adaptation and redistribution, provided the original work is properly cited (http://creativecommons.org/licenses/by/4.0/).)

The dried roots of an aquatic plant ( Eichhornia crassipes commonly known as water hyacinth) were included in the biomass of an upflow anaerobic sludge bed (UASB) reactor to evaluate the improvement effect on treating antibiotic-containing synthetic pharmaceutical effluent. The removals of three different antibiotics, namely erythromycin (ERY), tetracycline (TET) and sulfamethoxazole (SMX), were investigated using the unacclimatized inoculum during the startup period. Then, about 2.5% E. crassipes (w/w of volatile solids) was added to biomass during the last month of operation. Almost complete removal of each antibiotic was achieved, with efficiencies up to 99% (with initial ERY, TET and SMX of 200, 75 and 230 mg L -1 , respectively) regardless of E. crassipes addition. The presence of transformation products (TPs) of selected antibiotics was also investigated and ERY showed a higher potential to transform into its metabolites than SMX and TET. With the studied amount of E. crassipes , no positive impact against TPs formation was observed.

Clomazone is known to contaminate aquatic environments and have a negative impact on macrophytes. However, recent reports suggests that Pontederia crassipes Mart. can withstand clomazone exposure while maintaining growth rates. We hypothesized that this maintenance of growth is supported by photosynthetic plasticity of old leaves (developed before herbicide application), while new leaves (developed after application) exhibit phytotoxic symptoms. To investigate, two experiments were conducted with doses ranging from 0.1 mg L -1 to 0.5 mg L -1 plus untreated controls. Various parameters were measured in old and new leaves over 7, 12, and 15 d post-application, including visual symptoms, chlorophyll index, photosynthetic pigments, chlorophyll fluorescence, gas exchange, glycolate oxidase activity, carbohydrate content, leaf epidermis anatomy, and growth parameters. Clomazone exposure induced chlorosis, particularly in new leaves across all doses. These visual symptoms were accompanied by stomatal closure, restricting gas exchange and CO 2 fixation, leading to reduced photosynthetic rates and carbohydrate synthesis. However, clomazone did not affect old leaves, which maintained photosynthetic activity, sustaining essential metabolic processes of the plant, including reproductive functions. By ensuring high reproductive rates and metabolic continuity, old leaves supported the species' persistence despite clomazone presence., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

The use of eco-friendly natural fiber-reinforced polymer composites is rapidly expanding across diverse sectors. The rapid spread of water hyacinth disrupts aquatic ecosystems by modifying the pH of water and salinity in Bangladesh. This work investigated on the impact of incorporating both untreated and chemically treated water hyacinth fibers into polypropylene (PP). Untreated water hyacinth (UWH) powder was treated with an alkaline solution, producing mercerized water hyacinth (MWH). MWH was further oxidized to yield oxidized water hyacinth (OWH). Analysis of attenuated total reflection-fourier transform infrared (ATR-FTIR) spectra of UWH, MWH and OWH confirmed cellulose modification. The UWH and OWH were taken in varying contents (1, 2.5, 5, 7.5, and 10 wt%) and added to PP to make UWH-PP and OWH-PP composites using compression molding technique. The 1 % fiber content OWH-PP composites exhibited enhanced tensile strength, elongation, and impact strength compared to UWH-PP composites. Enhanced mechanical properties in OWH-PP composites suggested that benzoyl peroxide treatment improves interfacial adhesion. Morphological analysis of the OWH-PP composite showed better interfacial bonding between water hyacinth and PP than that of the UWH-PP composite. Thermogravimetric analysis (TGA) depicted the thermal stability of the UWH-PP and OWH-PP composites. The chemical reaction of cellulose monomer was further studied with DFT/B3LYP level of theory using two different basis sets 6-31+G(d, p) and cc-pVTZ. The calculated vibrational spectra of the untreated, mercerized and oxidized cellulose monomer agree well with the ATR-FTIR spectra, confirming chemical modification. DFT calculations of thermodynamic properties revealed the feasibility of the reactions. Electronic property (NBO charge) indicated charge transfer and structural changes during chemical modification., Competing Interests: The authors declare the following financial interests/personal relationships which may be considered as potential competing interests:The authors have disclosed no conflicts of interest. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024 The Authors.)

Water hyacinth (WH) is a widespread floating invasive aquatic plant with a prolific reproductive and dispersion rate. With the aid of its root-associated microbes, WH significantly modulates the ecosystem's functioning. Despite their irrevocable importance, the WH microbiome remains unexplored in detail. Here, we present a shotgun sequencing analysis of WH rhizobiome predominant in urban rivers and their surrounding water to unveil the diversity drivers and functional relationship. The core microbiome of the WH mainly consisted of the methane-metabolizing archaebacteria and sulfate-reducing bacteria, which are probably driving the methane and sulfur metabolic flux along the vegetative zone in the water. The beta diversity analysis revealed temporal variations (River WH_2020 vs. WH_2022) (R of 0.8 to 1 and R 2 of 0.17 to 0.41), which probably could be attributed to the transient taxa as there was a higher sharing of core bacteria (48%). Also, the WH microbiome significantly differed (R = 0.46 to 1.0 and R 2 of 0.18 to 0.52) from its surrounding water. Further, the functional analysis predicted 140 pollutant-degrading enzymes (PDEs) well-implicated in various xenobiotic pollutant degradation, including hydrocarbons, plastics, and aromatic dyes. These PDEs were mapped to bacterial genera such as Hydrogenophaga, Ideonella, Rubrivivax, Dechloromonas, and Thauera, which are well-reported for facilitating the metabolism of xenobiotic compounds. The higher prevalence of metal and biocide resistance genes further highlighted the persistence of resistant microbes assisting WH in bioremediation applications., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

The aquatic plant water hyacinth was dried then cross-linked with sodium alginate to produce ionic cross-linked microspheres. The mechanism of controlling cadmium (Cd) and lead (Pb) in wastewater was tested by DFT at B3LYP level using LANL2DZ basis set. Modeling results indicated that the hydrated metals could interact with sodium alginate (SA)/water hyacinth (WH) microspheres through hydrogen bonding. Adsorption energies showed comparable results while total dipole moment and HOMO/LUMO band gap energy showed slight selectivity towards the remediation of Pb. FTIR spectra of cross-linked microspheres indicated that WH is forming a composite with SA to change its structure into a microsphere to remove Cd and Pb from water. Raman mapping revealed that the active sites along the surface of the microspheres enable for possible adsorption of metals through its surface. This finding is supported by molecular electrostatic potential and optical confocal microscopy. Atomic absorption spectroscopy results confirmed that the microspheres are more selective for Pb than Cd. It could be concluded that WH cross-linked with SA showed the potential to remove heavy metals through its unique active surface as confirmed by both molecular modeling and experimental findings., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Medhat A. Ibrahim reports financial support was provided by Science and Technology Development Fund. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The potential for a non-native plant species to invade a new habitat depends on broadscale factors such as climate, local factors such as nutrient availability, and the biotic community of the habitat into which the plant species is introduced. We developed a spatially explicit model to assess the risk of expansion of a floating invasive aquatic plant species (FAV), the water hyacinth ( Pontederia crassipes ), an invader in the United States, beyond its present range. Our model used known data on growth rates and competition with a native submersed aquatic macrophyte (SAV). In particular, the model simulated an invasion into a habitat with a mean annual temperature different from its own growth optimum, in which we also simulated seasonal fluctuations in temperature. Twenty different nutrient concentrations and eight different temperature scenarios, with different mean annual amplitudes of seasonal temperature variation around the mean of the invaded habitat, were simulated. In each case, the ability of the water hyacinth to invade and either exclude or coexist with the native vegetation was determined. As the temperature pattern was changed from tropical towards increasingly cooler temperate levels, the competitive advantage shifted from the tropical FAV to the more temperate SAV, with a wide range in which coexistence occurred. High nutrient concentrations allowed the coexistence of FAV, even at cooler annual temperatures. But even at the highest nutrient concentrations in the model, the FAV was unlikely to persist under the current climates of latitudes in the Southeastern United States above that of Northern Alabama. This result may have some implications for where control efforts need to be concentrated.

This study presents novel composites of biochar (BC) derived from spinach stalks and zinc oxide (ZnO) synthesized from water hyacinth to be used for the first time in a hybrid system for activating persulfate (PS) with photocatalysis for the degradation of bromothymol blue (BTB) dye. The BC/ZnO composites were characterized using innovative techniques. BC/ZnO (2:1) showed the highest photocatalytic performance and BC/ZnO (2:1)@(PS + light) system attained BTB degradation efficiency of 89.47% within 120 min. The optimum operating parameters were determined as an initial BTB concentration of 17.1 mg/L, a catalyst dosage of 0.7 g/L, and a persulfate initial concentration of 8.878 mM, achieving a BTB removal efficiency of 99.34%. The catalyst showed excellent stability over five consecutive runs. Sulfate radicals were the predominant radicals involved in the degradation of BTB. BC/ZnO (2:1)@(PS + light) system could degrade 88.52%, 84.64%, 81.5%, and 77.53% of methylene blue, methyl red, methyl orange, and Congo red, respectively. Further, the BC/ZnO (2:1)@(PS + light) system effectively activated PS to eliminate 97.49% of BTB and 85.12% of dissolved organic carbon in real industrial effluents from the textile industry. The proposed degradation system has the potential to efficiently purify industrial effluents which facilitates the large-scale application of this technique., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

The widespread proliferation of water hyacinth ( Eichhornia crassipes ) in aquatic ecosystems has raised significant ecological, environmental, and socioeconomic concerns globally. These concerns include reduced biodiversity, impeded water transportation and recreational activities, damage to marine infrastructure, and obstructions in power generation dams and irrigation systems. This review critically evaluates the challenges posed by water hyacinth (WH) and investigates potential strategies for converting its biomass into value-added agricultural products, specifically nanonutrients-fortified, biochar-based, green fertilizer. The review examines various methods for producing functional nanobiochar and green fertilizer to enhance plant nutrient uptake and improve soil nutrient retention. These methods include slow or fast pyrolysis, gasification, laser ablation, arc discharge, or chemical precipitation used for producing biochar which can then be further reduced to nano-sized biochar through ball milling, a top-down approach. Through these means, utilization of WH-derived biomass in economically viable, eco-friendly, sustainable, precision-driven, and smart agricultural practices can be achieved. The positive socioeconomic impacts of repurposing this invasive aquatic plant are also discussed, including the prospects of a circular economy, job creation, reduced agricultural input costs, increased agricultural productivity, and sustainable environmental management. Utilizing WH for nanobiochar (or nano-enabled biochar) for green fertilizer production offers a promising strategy for waste management, environmental remediation, improvement of waterway transportation infrastructure, and agricultural sustainability. To underscore the importance of this work, a metadata analysis of literature carried out reveals that an insignificant section of the body of research on WH and biochar have focused on the nano-fortification of WH biochar for fertilizer development. Therefore, this review aims to expand knowledge on the upcycling of non-food crop biomass, particularly using WH as feedstock, and provides crucial insights into a viable solution for mitigating the ecological impacts of this invasive species while enhancing agricultural productivity., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024 The Authors.)

Heavy metal contamination in aquatic ecosystems worsens due to rapid industrial expansion. Biochar, an efficient and economical adsorbent, has attracted much interest in environmental science, particularly in removing heavy metals (HMs). The paper covers basic details on biochar, its preparation, and potential chemical and inorganic modifications. Possible adsorption mechanisms of HMs on biochar, which include electrostatic attraction, ion exchange, surface complexation, chemical precipitation, and hydrogen bonding, are also discussed. These mechanisms are affected by the type of biochar used and the species of HMs present. Research findings suggest that while biochar effectively removes HMs, modifications to the carbon-rich hybrid can enhance surface properties such as surface area, pore size, functional groups, etc., and magnetic properties in a few cases, making them more efficient in HM removal. The choice of feedstock materials is one of the key parameters influencing the sorption capacity of biochars. This review aims to investigate the use of various forms of water hyacinth (WH), including aquatic plants, biomass, biochar, and modified biochar, as effective adsorbents for removing HMs from aqueous solutions and industrial effluents through a comparative analysis of their adsorption processes. However, further studies on the diverse effects of functional groups of modified biochar on HMs adsorption are necessary for future research., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024 The Authors.)

Fluorescent sensor-based carbon dots (CDs) have significantly developed for sensing metal ions because of their great physical and optical properties, including tunable fluorescence emission, high fluorescence quantum yield, high sensitivity, non-toxicity, and biocompatibility. In this research, a green synthetic approach via simple gamma irradiation for the carbon dot synthesis from water hyacinth was developed since water hyacinth has been classified as an invasive aquatic plant containing cellulose, hemicellulose, and lignin. The thiol moiety (SH) was further functionalized on the surface functional groups of CDs as the "turn-off" fluorescent sensor for metal ion detection. Fluorescence emission displayed a red shift from 451 to 548 nm when excited between 240 and 500 nm. The quantum yield of CDs-SH was elucidated to be 13%, with strong blue fluorescence emission under ultraviolet irridiation (365 nm), high photostability and no photobleaching. The limit of detection was determined at micromolar levels for Hg 2+ , Cu 2+ , and Fe 3+ . CDs-SH could be a real-time monitoring sensor for Hg 2+ and Cu 2+ as fluorescence quenching was observed within 2 min. Furthermore, paper test-strip based CDs-SH could be applied to detect these metal ions., (© 2023. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Silver nanoparticles (AgNPs) can be produced safely and greenly using water hyacinth, an invasive aquatic plant, as a reducing agent. This study aimed to optimize the UV-irradiation parameters for the synthesis of AgNPs from water hyacinth leaf extract. The study varied the reaction time and pH levels and added a stabilizing agent to the mixture. The synthesized AgNPs were characterized using UV-visible spectroscopy (UV-vis), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and inductively coupled plasma optical emission spectroscopy (ICP-OES). The findings revealed that the optimal conditions for synthesizing AgNPs were achieved by adjusting the pH level to 8.5, adding starch as a stabilizing agent, and exposing the mixture to UV-A radiation for one hour. These conditions resulted in the smallest size and highest quantity of AgNPs. Furthermore, the synthesized AgNP colloids remained stable for up to six months. This study highlights the potential of utilizing water hyacinth as a sustainable and cost-effective reducing agent for AgNP synthesis, with potential applications in pharmaceuticals, drug development, catalysis, and sensing detection.

A fast and effective analytical method with biomass solid-phase microextraction sorbent combined with a high-performance liquid chromatography-ultraviolet detector was proposed for the determination of benzoylurea (BU) insecticides in tea products. The novel sorbent was prepared by activating and then carbonizing water hyacinth with a fast growth rate and low application value as raw material and showed a high specific surface area and multiple interactions with analytes, such as electrostatic action, hydrogen bonding, and π-π conjugation. After optimizing the three most important extraction parameters (pH [X 1 ], sample loading rate [X 2 ], and solution volume [X 3 ]) by Box-Behnken design, the as-established analytical method showed good extraction performance: excellent recovery (80.13%-106.66%) and wide linear range (1-400 µg/L) with a determination coefficient of 0.9992-0.9999, a low limit of detection of 0.02-0.1 µg/L and the satisfactory practical application results in tea products. All these indicate that the water hyacinth-derived material has the potential as a solid-phase extraction sorbent for the detection and removal of BU insecticides from tea products, and at the same time, it can also achieve the effect of rational use of biological resources, maintaining ecological balance, turning waste into treasure, and achieving industrial production., (© 2024 Wiley‐VCH GmbH.)

As the adverse effects of using plastics and perfluorinated alkyl substances become more apparent, there is a growing need for sustainable hydrophobic products. Cellulose and its derivatives are the most abundant and widely used polymers, and cellulose-based products have great potential in industries where plastics and other hydrophobic polymers are used, such as stain-resistant fabrics, food packaging, and oil-water separation applications. In this study, we extracted cellulose from water hyacinth (WH) biomass, known for its negative environmental impact, and converted it into hydrophobic cellulose. This addresses the issue of managing WH waste and creating an environmentally friendly hydrophobic material. Initially, aldehyde groups were introduced through oxidation with periodate, followed by direct octadecyl amine (ODA) grafting onto dialdehyde cellulose (DAC) via a Schiff base condensation. The resulting ODA modified cellulose (ODA-C) was dispersed in ethanol and used to coat various materials, including cotton fabric, cellulose filter paper, and packaging paper. The modified materials showed excellent hydrophobicity as measured by their water contact angles (WCAs), and the application of the coating was demonstrated for oil-water separation, stain-resistant hydrophobic fabric, and paper-based packaging materials. FTIR, XRD, and WCA analysis confirmed the successful modification of cellulose. A high separation efficiency of 99% was achieved for diesel/water separation using modified filter paper (MoFP), under gravity. On application of the coating, cotton fabric became hydrophobic and resisted staining from dye, and paper-based packaging materials became more robust by becoming water-resistant. Overall, the facile synthesis, low cost, high efficiency, and use of environmentally friendly sustainable materials make this a promising strategy for hydrophobically modifying surfaces for a wide range of applications while reducing the menace of water hyacinth., Competing Interests: Declaration of competing interest We declare that we have no known competing financial interests or personal relationships that could influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

In the present research, the presence of water hyacinth (Eichhornia crassipes) on the surface of the San Jose Dam located in the city of San Luis Potosi, S.L.P, Mexico, was monitored and mapped. The monitoring was conducted for 2 years (2018-2020) with remote sensing data from OLI Landsat 8 sensors, based on the normalized difference vegetation index (NDVI). The results demonstrated the capability and accuracy of this method, where it was observed that the aboveground cover area, proliferation, and distribution of water hyacinth are influenced by climatic and anthropogenic factors during the four seasons of the year. As part of a sustainable environmental control of this invasive species, the use of water hyacinth (WH) root (RO), stem (ST), and leaf (LE) components as adsorbent material for Pb(II) present in aqueous solution was proposed. The maximum adsorption capacity was observed at pH 5 and 25 °C and was 107.3, 136.8, and 120.8 mg g -1 for RO, ST, and LE, respectively. The physicochemical characterization of WH consisted of scanning electron microscopy (SEM), N 2 physisorption, infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), charge distribution, and zero charge point (pH PZC ). Due to the chemical nature of WH, several Pb(II) adsorption mechanisms were proposed such as electrostatic attractions, ion exchange, microprecipitation, and π-cation., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Although Eichhornia crassipes, commonly known as water hyacinth, has been widely used in wastewater treatment, further investigations are still needed to explore the removal efficiency of perfluoroalkyl acids (PFAAs) from the aqueous environment using this floating aquatic plant. In this study, a hydroponic experiment was conducted to assess accumulation, bioconcentration factors (BCFs), translocation factors (TFs), and removal rates of eight PFAAs by water hyacinth. The obtained results indicated that all PFAAs, including five perfluoroalkyl carboxylic acids (PFCAs) with chain lengths C4-C8 and three perfluoroalkyl sulfonic acids (PFSAs) with C4, C6, and C8, were readily accumulated in water hyacinth. Throughout the duration of the experiment, there was a noticeable increase in PFAA concentrations and BCF values for different plant parts. For the root, PFAAs with more carbon numbers showed a higher uptake than the shorter homologues, with PFSAs being more readily accumulated compared to PFCAs with the same carbon number in the molecules. In contrast, the levels of long-chain PFAAs were comparatively lower than those of short-chain substances in the stem and leaf. Notably, PFAAs with less carbon numbers, like PFPeA, PFBA, and PFBS, showed a remarkable translocation from the root to the stem and leaf with TFs >1. For the whole plant, no significant correlation was found between BCFs and organic carbon-water partition coefficients (K oc ), octanol-water partition coefficients (K ow ), membrane-water distribution coefficients (D mw ), or protein-water distribution coefficients (D pw ). The removal rates of PFAAs ranged from 40.3 to 63.5 % throughout the three weeks of the experiment while the removal efficiencies varied from 48.9 % for PFHxS to 82.6 % for PFPeA in the last week., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

A major global barrier to increased animal output is nutrition. The use of aquatic plants, which were previously considered to be waste and needed a lot of labor to eliminate, has recently come to light due to the lack of feed during the dry season in the majority of tropical regions of Africa. The objectives of this study were therefore to see how different dietary Eichhornia crassipise inclusion rates affect the hematological indicators of Ethiopian Doyogena sheep and Woyto-Guji goats. Blood samples were taken from the jugular veins of 12 Doyogena sheep and 12 Woyto-Guji goats in a 2 × 4 randomized crossover design with two animal species, four diets, and four random periods (15 - day adaption period followed by a 7- day experimental diet in each period). The dietary inclusion rates E. crassipise were 0, 25, 50, and 75% that was used as a replacement for commercial concentrate mix diet in the treatment groups. The data was analyzed using the SAS software programme PROC GLM, and Pearson's correlation coefficient was calculated between hematological markers. The hemoglobin (Hb), red blood cell count (RBC), packed cell volume (PCV), mean corpuscular volume (MCH), and mean corpuscular hemoglobin (MCHC) results revealed substantial, RDW-SD, and WBC differences between animal species ( P < 0.001). Sheep had greater WBC, Hb, RBC, PCV, RDW-SD, and RDW-CV levels, while goats had higher MCH and MCHC values ( P < 0.001). For the analyzed hematological measures, the Pearson's correlation coefficient ranged from low to strong in terms of positive and negative associations ( P < 0.05). Since all hematological indicators were closer to those of clinically healthy native Ethiopian sheep and goat breeds, feeding water hyacinth to sheep and goats up to a 75% inclusion level in diets without producing sickness may provide a remedy for adverse feed shortages., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2024 Fanta, Kechero and Yemane.)

Heavy metals (Cd, Ni, Zn, Cu, Cr, and Pb) are widely recognized as being hazardous to human health and environmentally deleterious. Therefore water hyacinth is used as a greener adsorption material. This study is a bibliometric analysis of research developments on the adsorption of lead (Pb) using water hyacinth (1995-2023). The data was retrieved from the Scopus database and analyzed using VOSviewer software to determine the relationship between keywords from each published document. The results of this research was divided into three parts: 1) publication output, 2) global research, and 3) keyword research. From the data obtained, it was found that there has been an increasing research trend of adsorption of lead using water hyacinth, although it is not significant and fluctuating. Overall, this study can be used by researchers to quantitatively assess trends and future directions of this research topic., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Global industrialization has contributed substantial amounts of chemical pollutants in rivers, resulting in an uninhabitable state and impacting different life forms. Moreover, water macrophytes, such as water hyacinths, are abundantly present in polluted rivers, significantly affecting the overall water biogeochemistry. Bioremediation involves utilizing microbial metabolic machinery and is one of the most viable approaches for removing toxic pollutants. Conventional techniques generate limited information on the indigenous microbial population and their xenobiotic metabolism, failing the bioremediation process. Metagenomics can overcome these limitations by providing in-depth details of microbial taxa and functionality-related information required for successful biostimulation and augmentation. An in-depth summary of the findings related to pollutant metabolizing genes and enzymes in rivers still needs to be collated. The present study details bioremediation genes and enzymes functionally mined from polluted river ecosystems worldwide using a metagenomic approach. Several studies reported a wide variety of pollutant-degrading enzymes involved in the metabolism of dyes, plastics, persistent organic pollutants, and aromatic hydrocarbons. Additionally, few studies also noted a shift in the microbiome of the rivers upon exposure to contaminants, crucially affecting the ecological determinant processes. Furthermore, minimal studies have focused on the role of water-hyacinth-associated microbes in the bioremediation potentials, suggesting the need for the bioprospecting of these lesser-studied microbes. Overall, our study summarizes the prospects and utilities of the metagenomic approach and proposes the need to employ it for efficient bioremediation., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Water hyacinth (Wh) is an aquatic weed considered a nuisance in agricultural and fishing activities. Therefore, this study proposed repurposing this plant into activated carbon (AC). First, the ZnO-AC was precipitated and applied as a photocatalyst for degrading methylene blue. The preliminary photocatalytic test under UV irradiation identified the optimum ZnO-AC photocatalyst to degrade methylene blue (MB). The ZnO-AC photocatalyst recorded the highest degradation rate constant of 11.49 × 10 -3 min -1 , which was almost two-fold higher than that of ZnO (5.55 × 10 -3 min -1 ). Furthermore, photocatalytic degradation of MB and carbaryl under sunlight irradiation by ZnO-AC demonstrated degradation rate constants of 74.46 × 10 -3 min -1 and 8.43 × 10 -3 min -1 , respectively. To investigate the properties of ZnO-AC, several techniques were performed. ZnO-AC and ZnO exhibited similar results in morphology, crystalline structure, and Raman characteristics. However, ZnO-AC presented smaller pore diameters than those of ZnO, which enlarged pore surface area, and the presence of carbon-related groups implied the presence of AC on ZnO-AC surfaces. This can be attributed to the presence of AC on the ZnO surface, increasing the capture of surrounding toxic molecules and elevating the reaction density. This mechanism is attributed to promoting the degradation of toxic molecules. Therefore, using Wh as a carbon source for the transformation of AC can alternatively solve the problems of aquatic weed management and carbon storage strategies, and the application of AC in ZnO-AC photocatalysts can enhance photocatalysis.

Driven by the imperative need for sustainable and biodegradable materials, this study focuses on two pivotal aspects: cellulose extraction and dye removal. The alarming repercussions of non-biodegradable food packaging materials on health and the environment necessitate the exploration of viable alternatives. Herein, we embark on creating easily degradable biopolymer substitutes, achieved through innovative crafting of a biodegradable cellulose sheet sourced from extracted cellulose. Concurrently, the significant environmental and health hazards posed by textile industry discharge of wastewater laden with persistent dyes demand innovative treatment strategies. This study extensively investigated four distinct methods of cellulose extraction from water hyacinth, a complex aquatic weed. The functional groups, crystallinity index, thermal stability, thermal effects, and morphology of the extracted cellulose were characterized by FTIR, XRD, TGA, DSC, and SEM. This exploration yielded a notable outcome, as the most promising yield (39.4 ± 0.02% w/w) emerged using 2% sodium chlorite and 2% glacial acetic acid as bleaching agents, surpassing other methods. Building on this foundational cellulose extraction process, the extracted fibers were transformed into highly biodegradable cellulose sheets, outlining conventional packaging materials. Moreover, these cellulose sheets exhibit exceptional efficacy in adsorbing reactive red dye, with the adsorption capacity of 71.43 mg/g by following pseudo-second kinetics. This study establishes an economically viable avenue for repurposing challenging aquatic weeds into commercially valuable biopolymers. The potential of these sheets for dye removal, coupled with their innate biodegradability, opens auspicious avenues for broader applications encompassing commercial wastewater treatment procedures., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

This study focuses on the development of a high-performance composite using a novel technique incorporating nanocellulose extracted from water hyacinth. The extraction procedure of nanocellulose from water hyacinth stems involves acid hydrolysis and sonication, followed by its incorporation into jute, glass, and cotton fabric through the dip coating method. The crystallinity index of the nanocellulose was determined to be 40.72% using X-ray diffraction (XRD) analysis. Additionally, the functional groups of the extracted nanocellulose were identified through FT-IR analysis, while scanning electron microscopy (SEM) demonstrated morphological changes after nanocellulose coating. Our synthesized water hyacinth nanocellulose exhibited compliance with previously studied results in FT-IR analysis. Both tensile and flexural strength tests revealed that the nanocellulose coating significantly improved the strength of the jute, cotton, and glass fabric-reinforced composites compared to their raw counterparts. Specifically, the jute nanocomposite exhibited a 24.61% increase in strength, the cotton woven nanocomposite showed a 19.39% enhancement, and the glass nanocomposite displayed 8.47% increment in strength. Similarly, the flexural stress of jute and cotton fabric nanocomposites showed a notable 11% and 8.9% increase, surpassing the 3.59% rise observed in glass nanocomposites. Overall, this research successfully completed all tests and achieved superior findings compared to earlier studies., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2023 The Authors.)

One of the most important properties of cellulolytic enzyme is its ability to convert cellulosic polymer into monomeric fermentable sugars which are carbohydrate by nature can efficiently convert into biofuels. However, higher production costs of these enzymes with moderate activity-based stability are the main obstacles to making cellulase-based applications sustainably viable, and this has necessitated rigorous research for the economical availability of this process. Using water hyacinth (WH) waste leaves as the substrate for cellulase production under solid state fermentation (SSF) while treating the fermentation production medium with CuO (cupric oxide oxide) bionanocatalyst have been examined as ways to make fungal cellulase production economically feasible. Herein, a sustainable green synthesis of CuO bionanocatalyst has been performed by using waste leaves of WH. Through XRD, FT-IR, SEM, and TEM analysis, the prepared CuO bionanocatalyst's physicochemical properties have been evaluated. Furthermore, the effect of CuO bionanocatalyst on the temperature stability of raw cellulases was observed, and its half-life stability was found to be up to 9 h at 65 °C. The results presented in the current investigation may have broad scope for mass trials for various industrial applications, such as cellulosic biomass conversion., Competing Interests: Declaration of competing interest Authors of the manuscript declare there is no conflict of interests., (Copyright © 2023 Elsevier B.V. All rights reserved.)

The economic production of cellulase enzymes for various industrial applications is one of the major research areas. A number of broad industrial applications, for example, in cellulosic biomass hydrolysis for simple sugars such as glucose and subsequent biofuel production, make these enzyme systems the third most demanding enzymes. Nevertheless, due to their production on commercial substrates, cellulases fall into the category of costly enzymes. Therefore, the goal of the present work is to evaluate the enhancement of cellulase production and its utilization in the enzymatic hydrolysis of biomass using low-cost cellulosic substrate, which is abundant and widely available. In this context, waste biomasses of water hyacinth (WH), including leaves and stems, have been used as feedstock to produce cellulases via solid-state fermentation (SSF) in the current study, which improves its production as well as activity. Furthermore, the impact of process parameters like temperature and pH has been investigated for improved cellulase production. At optimum concentration using 10 g of feedstock, 22 IU/gds of FP, 92 IU/gds of BGL, and 111 IU/gds of EG have been noticed in day 5 of SSF. Herein, 40 °C has been identified as the optimum temperature for cellulase production, whereas 50-55 °C has been recorded as the optimum reaction temperature for cellulase enzyme activity. Additionally, pH 5.5 has been identified as the optimum pH for cellulase enzyme production, whereas this enzyme was thermally stable (55 °C) at pH 5.0 up to 3.5 h. Further, the cellulosic biomass hydrolysis of WH leaves via an optimized crude enzyme has been performed, and this could release 24.34 g/L of glucose in 24 h of the reaction. The current findings may have potential for developing cellulases for mass-scale production using WH-based waste bioresources for numerous biorefinery applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Aquatic weeds have exceptionally high reproduction rates, are rich in cellulose and hemicellulose, and contain a negligible amount of lignin, making them an ideal crop for the next generation of biofuels. Previously reported studies proposed that water hyacinth, water lettuce, common duckweeds, and water spinach can be managed or utilized using different advanced techniques; from them, anaerobic digestion is one of the feasible and cost-effective techniques to manage these biowastes. The present study was carried out to investigate the potential of utilizing four common aquatic weed species (water hyacinth, water lettuce, common duckweeds, and water spinach) as substrates for anaerobic digestion in order to produce biogas for use in biofuels. The high reproduction rates and high cellulose and hemicellulose content, coupled with low lignin content, of these aquatic weeds make them ideal candidates for this purpose. The study evaluated the feasibility of using anaerobic digestion as a management technique for these aquatic weeds, which are often considered invasive and difficult to control. The results from various studies indicate that these aquatic weeds are productive feedstock options for anaerobic digestion, yielding a high biogas output. Among the aquatic weeds studied, water hyacinth, water lettuce, and common duckweeds exhibit higher methane production compared to water spinach. The study provides an overview of the characteristics and management strategies of these aquatic weeds in relation to biogas production, with possible future developments in the field., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

In this study, flame-retardant poly (butylene succinate) (PBS) composites were developed utilizing a bio-based intumescent flame retardant (IFR) system. Water hyacinth fiber (WHF) was used as a bio-based carbon source, while ammonium polyphosphate (APP) served as both an acid source and a blowing agent. Effects of WHF:APP weight ratio and total IFR content on the thermal stability and flammability of WHF/APP/PBS composites were investigated. The results demonstrated that the 15WHF/30APP/PBS composite with a WHF to APP ratio of 1:2 and a total IFR content of 45 wt% had a maximum limiting oxygen index (LOI) value of 28.8% and acquired good flame retardancy, with a UL-94 V-0 rating without polymer-melt dripping. Additionally, its peak heat release rate (pHRR) and total heat release (THR) were, respectively, 53% and 42% lower than those of the neat PBS. Char residue analysis revealed that the optimal WHF:APP ratio and total IFR content promoted the formation of a high graphitized intumescent char with a continuous and dense structure. In comparison to the neat PBS, the tensile modulus of the 15WHF/30APP/PBS composite increased by 163%. Findings suggested the possibility of employing WHF, a natural fiber, as an alternative carbon source for intumescent flame-retardant PBS composites.

Water Hyacinth Leaf Protein Concentrate/Graphene Oxide (WHLPC/GO) hydrogel was synthesized for the removal of Cr(VI) from wastewater. About 90% of the prepared hydrogel constitutes WHLPC. The prepared material was characterized by FT-IR and XRD. The process variables such as pH, contact time, adsorbent dosage, initial Cr(VI) concentration, and temperature were optimized using a batch mode experiment. Kinetic studies were also conducted and it was observed that the chemosorptive pseudo-second-order best described the adsorption system with a correlation coefficient (R 2 ) of 0.984. The highest adsorption capacity of 322.00 mg/g was achieved at pH 1.0, and equilibrium was achieved within 420 min. Various isotherm models were analyzed using non-linear fitting. It was found that the Sips model provides the best fit, indicating heterogeneous and uniform active site surface adsorption of Cr(VI) on the WHLPC/GO. The reuse efficiency of the synthesized material was also found to be greater than 84% for five consecutive cycles. Thermodynamic studies were conducted and results revealed that the adsorption was spontaneous and endothermic., (© 2023. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

Since Bangladesh already has robust pharmaceutical industries, nearly all companies owned effluent treatment plant (ETP) facilities to improve the quality of wastewater. Water retreatment utilizing affordable, accessible, and environmentally sustainable techniques have not yet been thoroughly investigated. In this study, the potential of water hyacinth and water lettuce was investigated at three different concentrations: 50% of total volume coverages (1000 g macrophytes/2000 ml water), 75% of total volume coverages (1500 g macrophytes/2000 ml water), and 100% of total volume coverages (2000 g macrophytes/2000 ml water) on the post-treated ETP's wastewater for 3 weeks in a mesocosm environment. Heavy metals, such as chromium (Cr) and nickel (Ni) along with physicochemical parameters (pH, EC, TDS, DO, and BOD 5 ) were measured after 7 days intervals. Results indicated that water hyacinth was considerably more efficient than water lettuce at removing many factors, including metals. Water hyacinth was able to remove 79.15% of nickel and 92.97% of chromium while also increasing DO and EC by 36.72% and 14.59%, respectively, at 100% of total volume coverages. On the other hand, 100% of the total volume coverage of water lettuce decreased the pH, TDS, and BOD 5 readings by 6.70%, 31.62%, and 87.61%, respectively. With each treatment, the water quality significantly improved over the control. The findings suggest that the pharmaceutical industries may improve the quality of their treated wastewater even more by integrating phytoremediation technology with traditional ETP facilities., (© 2023. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

Background and Objectives : This study was planned to investigate the anti-arthritic property of flowers of E. crassipes in a Sprague-Dawley rat model by administering Freund's Complete Adjuvant (FCA). Materials and Methods : Arthritis was induced at day 0 in all rats except negative controls, while arthritic progress and paw edema were analyzed on specific days (8th, 13th, 18th, and 23rd) via the macroscopic arthritic scale and a digital Vernier caliper, respectively. Histopathological parameters were examined using a Hematoxylin and Eosin (H&E) staining method. Blood samples were withdrawn from rats to investigate the effects of the E. crassipes flower on the mRNA expression values of inflammatory markers, via a reverse transcription PCR technique. Serum samples were used to determine prostaglandin E2 (PGE2) levels using enzyme-linked immunosorbent assay (ELISA). Values of alanine transaminase (ALT), aspartate aminotransferase (AST), creatinine, and urea, besides hematological parameters, i.e., the hemoglobin (Hb) content and complete blood count (CBC), were investigated. Results : The data showed that E. crassipes inhibited the arthritic progress and ameliorated the paw edema. The amelioration of parameters assessed via the histopathological analysis of ankle joints, as well as via hematological analysis, confirmed the diminution of rheumatoid arthritis (RA) in the plant-treated groups. Treatment with E. crassipes inhibited the expression levels of tumor necrosis factor-α (TNF-α), interleukins (IL-1β and IL-6), nuclear factor KappaB (NF-κB), matrix metalloproteinase (MMP-2 and MMP-3), and vascular endothelial growth factor (VEGF). Serum PGE2 levels were also found to be reduced in treatment groups. A biochemical investigation revealed the improvements in hepatic markers in plant-treated groups. The data indicated that the plant has no hepatotoxic or nephrotoxic effects at the studied dose. GC-MS (Gas Chromatography-Mass Spectrometry) analysis displayed the presence of phytochemicals having known anti-inflammatory and antioxidant properties. Conclusions : Therefore, it may be concluded that E. crassipes possesses anti-arthritic characteristics that could be attributed to the modulation of pro-inflammatory cytokines, MMPs, and PGE2 levels.

Making silage is a green process to use the fast-growing water hyacinth (Eichhornia crassipes) biomass. However, the high moisture (∼95%) of the water hyacinth is the biggest challenge to making silage while its effects on fermentation processes are less studied. In this study, water hyacinths silage with different initial moistures were conducted to investigate the fermentation microbial communities and their roles on the silage qualities. Results show that both silages with 70% (S70) and 90% (S90) of initial moistures achieved the target of silage fermentation, however, their microbial processes were significantly different. Their succession directions of microbial communities were different: Plant cells in S70 were destroyed by the air-dry treatment, thus there were more soluble carbohydrates, which helped the inoculated fermentative bacteria become dominant (Lactobacillus spp. > 69%) and produce abundant lactic acid; In contrast, stochastic succession became dominant over time in S90 (NST = 0.79), in which Lactobacillus spp. and Clostridium spp. produced butyric that also obviously decreased the pH and promoted the fermentation process. Different microbial succession led to different metabolic patterns: S70 had stronger starch and sucrose metabolisms while S90 had stronger amino acid and nitrogen metabolisms. Consequently, S70 had higher lactic acid, crude protein and lower ammonia nitrogen and S90 had higher in vitro digestibility of dry matter and higher relative feeding value. Moreover, the variance partitioning analysis indicated that moisture could only explain less information (5.9%) of the microbial assemblage than pH value (41.4%). Therefore, the colonization of acid-producing bacteria and establishment of acidic environment were suggested as the key on the silage fermentation no matter how much is the initial moisture. This work can provide a basis for the future preparation of high-moisture raw biomasses for silage., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Water hyacinth (WH) was used to prepare biochar for phase change energy storage field to realize encapsulation and enhance thermal conductivity of phase change materials (PCMs) in this work. The maximum specific surface area of modified water hyacinth biochar (MWB) obtained by lyophilization and carbonization at 900 °C was 479.966 m 2 /g. Lauric-myristic-palmitic acid (LMPA) was used as phase change energy storage material, LWB900 and VWB900 were used as porous carriers respectively. Modified water hyacinth biochar matrix composite phase change energy storage materials (MWB@CPCMs) were prepared by vacuum adsorption method, with loading rates of 80 % and 70 % respectively. The enthalpy of LMPA/LWB900 was 105.16 J/g, which was 25.79 % higher than that of LMPA/VWB900, and the energy storage efficiency was 99.1 %. Moreover, the introduction of LWB900 increased the thermal conductivity (k) of LMPA from 0.2528 W/(m·K) to 0.3574 W/(m·K). MWB@CPCMs have good temperature control capability, and the heating time of LMPA/LWB900 was 15.03 % higher than that of LMPA/VWB900. In addition, after 500 thermal cycles, the maximum change rate of enthalpy of LMPA/LWB900 was 6.56 %, and it maintains a phase change peak, showing better durability than LMPA/VWB900. This study shows that the preparation process of LWB900 is the best, and the adsorption of LMPA has high enthalpy value and stable thermal performance, realizing the sustainable development of biochar., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Anaerobic co-digestion (co-AD) of agro-industrial waste, namely, palm oil mill effluent (POME) and sugarcane vinasse (Vn), with water hyacinth (WH) as co-substrate was carried out in two separate Anaerobic Suspended Growth Closed Bioreactors (ASGCBs) under thermophilic (55 °C) conditions. The highest chemical oxygen demand (COD) and soluble COD reduction in co-AD of POME-WH (78.61%, 78.86%) is slightly higher than co-AD of Vn-WH (75.75%, 78.24%). However, VFA reduction in co-AD of POME-WH (96.41%) is higher compared to co-AD of Vn-WH (85.94%). Subsequently, biogas production peaked at 13438 mL/day values and 16122 mL/day for co-AD of POME-WH and Vn-WH, respectively. However, the methane content was higher in the co-AD of POME-WH (72.04%) than in the co-AD of Vn-WH (69.86%). Growth yield (Y G ), maximum specific substrate utilization rate (r x,max ) and maximum specific biomass growth rate (μ max ) are higher in co-AD of POME-WH, as supported by the higher mixed liquor volatile suspended solids (MLVSS) and COD reduction efficiency compared to co-AD of Vn-WH. However, methane yield ([Formula: see text]) reported in the co-AD of POME-WH and Vn-WH are 0.2748 and 0.3112 L CH 4 /g COD reduction , respectively, which suggests that WH is a more suitable co-substrate for Vn compared to POME., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

The application of fungicides (such as tebuconazole) can impose harmful impacts on the ecosystem and humans. In this study, a new calcium modified water hyacinth-based biochar (WHCBC) was prepared and its effectiveness for removing tebuconazole (TE) via adsorption from water was tested. The results showed that Ca was loaded chemically (CaC 2 O 4 ) onto the surface of WHCBC. The adsorption capacity of the modified biochar increased by 2.5 times in comparison to that of the unmodified water hyacinth biochar. The enhanced adsorption was attributed to the improved chemical adsorption capacity of the biochar through calcium modification. The adsorption data were better fitted to the pseudo-second-order kinetics and the Langmuir isotherm model, indicating that the adsorption process was dominated by monolayer adsorption. It was found that liquid film diffusion was the main rate-limiting step in the adsorption process. The maximum adsorption capacity of WHCBC was 40.5 mg/g for TE. The results indicate that the absorption mechanisms involved surface complexation, hydrogen bonding, and π-π interactions. The inhibitory rate of Cu 2+ and Ca 2+ on the adsorption of TE by WHCBC were at 4.05-22.8%. In contrast, the presence of other coexisting cations (Cr 6+ , K + , Mg 2+ , Pb 2+ ), as well as natural organic matter (humic acid), could promote the adsorption of TE by 4.45-20.9%. In addition, the regeneration rate of WHCBC was able to reach up to 83.3% after five regeneration cycles by desorption stirring with 0.2 mol/L HCl ( t = 360 min). The results suggest that WHCBC has a potential in application for removing TE from water.

High rates of fluorosis were reported worldwide as a result of human consumption of water with fluoride contents. Adjusting fluoride concentration in water as recommended by the World Health Organization (<1.5 mg L -1 ) is a concern and it needs to be conducted through inexpensive, but efficient techniques, such as phytoremediation. The application of phytohormones was investigated as a strategy to improve this process. Thus, the main goal of this research was to evaluate the effect of exogenous auxin and gibberellin on the tropical duckweed Eichhornia crassipes performance for fluoride phytoremediation. Definitive screening and central composite rotatable designs were used for experiments where fluoride concentration (5~15 mg L -1 ), phosphorus concentration (1~10 mg L -1 ), and pH (5~9) were assessed as well throughout 10 days. Fluoride contents were determined in solution and plant tissues by potentiometry. Higher concentrations of fluoride reflected on greater absorptions by plants, though in relative terms removal efficiencies were quite similar for all treatments (~60%). Auxin and acidic conditions favored fluoride removals per mass of plant. Fluoride accumulated mostly in leaves and auxin probably alleviated toxic effects on E. crassipes while gibberellin showed no effect. Therefore, E. crassipes could be employed as a fluoride accumulator plant for water treatment and exogenous auxin may be used to improve the process.

The utilisation of water hyacinth for production of biogas is considered to be a solution to both its control and the global renewable energy challenge. In this instance, an investigation was conducted to evaluate the potential of water hyacinth inoculum to enhance methane production during anaerobic digestion (AD). Chopped whole water hyacinth (10% (w/v)) was digested to prepare an inoculum consisting mainly of water hyacinth indigenous microbes. The inoculum was incorporated in the AD of freshly chopped whole water hyacinth to set up different ratios of water hyacinth inoculum and water hyacinth mixture with appropriate controls. The results of batch tests with water hyacinth inoculum showed a maximal cumulative volume of 211.67 ml of methane after 29 days of AD as opposed to 88.6 ml of methane generated from the control treatment without inoculum. In addition to improving methane production, inclusion of water hyacinth inoculum reduced the electrical conductivity (EC) values of the resultant digestate, and, amplification of nifH and phoD genes in the digestate accentuates it as a potential soil ameliorant. This study provides an insight into the potential of water hyacinth inoculum to enhance methane production and contribute to the feasibility of the digestate as a soil fertility enhancer., (© 2023. The Author(s).)

Plant waste is a huge source of natural fibers and has great potential in the field of reinforced polymer composites to replace the environmentally harmful synthetic composites. In this study, fibers were extracted from water hyacinth (WH) petiole and sugarcane bagasse (SB) to make nonwovens by wet-laid web formation, and reinforced on the polyester (P) and epoxy (E) resins to make four types of composites namely, water hyacinth nonwoven reinforced epoxy (WH + E), water hyacinth nonwoven reinforced polyester (WH + P), sugarcane bagasse nonwoven reinforced epoxy (SB + E) and sugarcane bagasse nonwoven reinforced polyester (SB + P) composites. Water repellent (WR) on the nonwovens and gamma radiation (GR) on the composites were applied to improve the hydrophobicity and mechanical properties, such as tensile strength (TS), elongation at break and tensile modulus (TM) of the composites. The morphological structure of the fiber surfaces and tensile fractures were analyzed by SEM. FTIR spectra showed changes in functional groups before and after treatment. XRD analysis exhibited an increase in crystallinity for gamma-irradiated composites and a decrease in crystallinity for WR-treated composites compared to untreated composites. The SB composites (SB + E, SB + P) and polyester composites (WH + P, SB + P) showed higher water absorbency and lower mechanical properties than the WH composites (WH + E, WH + P) and epoxy composites (WH + E, SB + E), respectively. Hydrophobicity improved significantly by approximately 57% (average) at a concentration of 10% WR. However, TS and TM were reduced by approximately 24% at the same concentration. Thus, 5% WR is considered an optimum concentration due to the very low deterioration of TS and TM (<10%) but significant improvement in hydrophobicity (~39%) at this dose. On the other hand, GR treatment significantly improved TS, TM and hydrophobicity by 41, 32 and 25%, respectively, and decreased Eb% by 11% at a dose of 200 krd. However, mechanical properties and hydrophobicity deteriorated with further increase in dose at 300 krd. Thus, 200 krd is considered the optimum dose of GR.

A huge quantity of toxic hexavalent chromium (Cr-VI or Cr 6+ ) was released into the environment through mine effluent at the South Kaliapani chromite mining area during different mining activities. The present in situ bioremediation approach was conducted to assess the remediation potential of a well-known aquatic weed water hyacinth (Eichhornia crassipes (Mart.) Solms-Laub) for attenuating Cr(VI) from mine wastewater. The study correlates the bio-concentration factors (BCF) of Cr with the reduction percentage. The percent reduction of Cr content in mine effluent was maximum (53.5%) at 100 days after treatment (DAT) followed by 40.7% at 75 DAT after passage through 2000 sq. ft area covering four water hyacinth-populated (1350 plants) ponds. Reduction in Cr content of OMC discharged mine effluent varies with plant age as well as with the distance of passage. A constant increase in root biomass was recorded with increased passage distance and days of treatment of contaminated mine effluent. The plants could not survive after 125 days of treatment but could show an increasing trend in shoot biomass up to 100 DAT. After 75 days of treatment, it was noted that Cr concentration in roots decreased from 200 to 148 ppm and from 76 to 21 ppm in shoots after passage through the 2000 sq. ft area at 100 DAT. Water hyacinth roots exhibit maximum Cr bioaccumulation at 75 DAT, whereas this was highest in shoots at 100 DAT., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Water hyacinth (WH) is an aquatic weed with an experimentally proven potential as a feedstock for bioethanol production. Unlike other bioethanol feedstocks, water hyacinth has no requirement for land use and resource consumption for cultivation. This study evaluates scaled-up bioethanol production process routes, modelled using the Aspen Plus process simulator to analyse the process performance of water hyacinth as a bioethanol feedstock. Four process scenarios are developed by combining two different feedstock pretreatment methods (i.e., alkali pretreatment and diluted acid pretreatment) and bioethanol dehydration techniques (i.e., azeotropic distillation and extractive distillation). Mass and energy flows of the four scenarios are comparatively analysed. Results show that the alkali pretreatment method provides a higher bioethanol yield (i.e., 254 L/tonne-WH) compared with the dilute acid pretreatment method (i.e., 210 L/tonne-WH). In addition, the process route combining alkali pretreatment and extractive dehydration techniques indicates the least process energy consumption of 45,310 MJ/m 3 of bioethanol. The process energy flow analysis evaluates two energy sustainability indicators, i.e., net energy gain and renewability factor, with further interpretation of variation effects of the key process parameters through a sensitivity analysis. The feasible ways of utilising water hyacinth as a fuel-grade bioethanol feedstock for industrial-scale production are discussed., Supplementary Information: The online version contains supplementary material available at 10.1007/s13399-023-03891-w., Competing Interests: Conflict of interestThe authors declare no competing interests., (© The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature 2023, Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.)

Plant-associated microorganisms play a critical role in plant survival and functional attributes. There are many studies on the taxonomical and functional aspects of microorganisms associated with terrestrial plants. However, the microbiome of aquatic plants is not much explored. This work details the studies on microbiomes and diversity in microbial communities inhabiting the three common free-floating aquatic plants of tropical regions viz. duckweed, water hyacinth and water lettuce, widely implicated for their bioremediation potential. Studies conducted till date reveal the prevalence and dominance of different Bacillus sp. Other genera, including Rhodanobacter, Pseudomonas, Rhizobium, Achromobacter, Serratia, Actinobacteria, Proteobacter, Klebsiella and Acidobacteria, have also been prominently reported. This lesser explored niche offers great bioprospecting opportunities to obtain taxonomically diverse and functionally distinct microorganisms. Bacterial endophytes from these aquatic plants have been primarily studied for their ability to produce indole acetic acid and degrade phenol. Limited studies reveal some fungal endophytes to have promising herbicidal effect. Not much is known on other functional attributes and hence microbial studies on these plants holds much promise for obtaining novel isolates or isolates with novel functions that would impact both aquatic and terrestrial ecosystems. This study proposes the need for exploring the role of endophytes as biocontrol agents and their potential to provide a pragmatic and robust solution to the aquatic weed menace in freshwater bodies. Bioprospecting of this lesser studied ecological niche hence is a promising field of research that has both environmental and economic potential., (© 2023. The Author(s), under exclusive licence to Springer Nature B.V.)

Inland water plants, particularly those that thrive in shallow environments, are vital to the health of aquatic ecosystems. Water hyacinth is a typical example of inland species, an invasive aquatic plant that can drastically alter the natural plant community's floral diversity. The present study aims to assess the impact of water hyacinth biomass on the floristic characteristics of aquatic plants in the Merbil wetland of the Brahmaputra floodplain, NE, India. Using a systematic sampling technique, data were collected from the field at regular intervals for one year (2021) to estimate monthly water hyacinth biomass. The total estimate of the wetland's biomass was made using the Kriging interpolation technique. The Shannon-Wiener diversity index ( H '), Simpson's diversity index ( D ), dominance and evenness or equitability index ( E ), density, and frequency were used to estimate the floristic characteristics of aquatic plants in the wetland. The result shows that the highest biomass was recorded in September (408.1 tons/ha), while the lowest was recorded in March (38 tons/ha). The floristic composition of aquatic plants was significantly influenced by water hyacinth biomass. A total of forty-one plant species from 23 different families were found in this tiny freshwater marsh during the floristic survey. Out of the total, 25 species were emergent, 11 were floating leaves, and the remaining five were free-floating habitats. Eichhornia crassipes was the wetland's most dominant plant. A negative correlation was observed between water hyacinth biomass and the Shannon ( H ) index, Simpson diversity index, and evenness. We observed that water hyacinths had changed the plant community structure of freshwater habitats in the study area. Water hyacinth's rapid expansion blocked out sunlight, reducing the ecosystem's productivity and ultimately leading to species loss. The study will help devise plans for the sustainable management of natural resources and provide helpful guidance for maintaining the short- to the medium-term ecological balance in similar wetlands., Competing Interests: Gowhar Meraj is an Academic Editor for PeerJ., (©2023 Lahon et al.)

The production of paper is a key component for global civilization. Around 300 million tonnes of paper are produced every day globally, with matured pulpwood being the major contributor. Due to rising demand for paper and the depletion of available wood resources, researchers are now focused on finding alternative non-wood resources that are suitable for pulp and paper production. The current study aims to produce eco-friendly and biodegradable paper using a combination of Eichhornia crassipes (water hyacinth) and dried flowers. Water hyacinth is considered as a lignocellulose plant which contains 57% lignocellulose, and dried flower contains 40% cellulose, which is the prime source for paper production. Various sections of water hyacinth, including wet and dry petiole, leaves, and root, were blended with dried flowers through the soda process. Then, the physical properties and FTIR analysis was carried out to identify the quality of the paper produced. The paper produced from root and dried petiole has a lower thickness (1.0 mm and 0.5 mm) than other mix proportions. The opacity of the leaves was found to be 0.5% (light passing) and for the root 0.7% (light passing). Also, the dry petiole and root paper have a good dry tensile strength of 1.30Kpa and 1.20Kpa, respectively. Hence, paper made from dry petiole and root was found to be efficient and suitable for the paper industry., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

For a long time, water hyacinth has been considered a very stubborn and troublesome weed. However, research has shown that it can be used to remove many pollutants from water. Among the different pollutants, potentially toxic elements (PTE) or their ions have been found to be very toxic for humans, animals, and plants. Among the many conventional methods for removing PTE from wastewaters, phytoremediation has several advantages. This method is highly eco-friendly, cost-effective, and can remove a wide range of metal pollutants and organic pollutants. Both, living and non-living water hyacinth plants, can be used for remediation - either entirely or their parts. Study on mechanisms and different factors involved in the process would help to effectively use water hyacinth for remediation. This review presents different studies conducted in the past thirty years for the removal of PTEs. Detailed analysis of the work done in this field showed that in spite of the main advantages provided by the plant, not much has been done to increase the efficiency of the remediation process and for reusing the water hyacinth biomass for other applications after desorption of the PTE. Hence, the section on scope for future work highlights these prospective ideas. Novelty statement: Water hyacinth, which is a very stubborn weed and has a negative impact on the environment, can be constructively used to remove potentially toxic elements (PTEs) along with other pollutants from wastewaters. Different parts of the water hyacinth plant like roots, leaves, and stems or the entire plant can be used. Further, either the live plant or its other forms, such as dried powder, biochar, or activated carbon can be used. This review focuses on different forms of water hyacinth plant used, the advantages and limitations associated with these methods and the scope for future work.

This study investigated the effect of cobalt oxide nanoparticles (Co 3 O 4 -NPs) supplementation on anaerobic microbial population changes and anaerobic digestion (AD) performance and production. Co 3 O 4 -NPs (3 mg/L) showed the maximum enhancement of biogas yield over the cow dung (CD) as control and the co-digestion process of CD with water hyacinth (WH) by 58.9 and 27.2 %, respectively. Furthermore, methane (CH 4 ) yield was enhanced by 89.96 and 43.4 % over CD and co-digestion processes, respectively. Additionally, the microbiological assessment analysis using VIT® gene probe technology showed that Co 3 O 4 -NPs enhance the viability of total bacterial cells by 9 %. The techno-economic analysis reflects the revenue of this strategy on the highest net energy content of biogas, which was achieved with 3 mg/L Co 3 O 4 -NPs and was 428.05 kWh with a net profit of 67.66 USD/m 3 of the substrate. Therefore, nanoparticle supplementation to the AD process can be considered a promising approach to enhance biogas and CH 4 ., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Water hyacinth ( Eichhornia crassipes ) (WH) is a widespread aquatic plant. As a top invasive macrophyte, WH causes enormous economic and ecological losses. To control it, various physical, chemical and biological methods have been developed. However, multiple drawbacks of these methods limited their application. While being a noxious macrophyte, WH has great potential in many areas, such as phytoremediation, manufacture of value-added products, and so on. Resource utilization of WH has enormous benefits and therefore, is a sustainable strategy for its control. In accordance with the increasing urgency of maintaining environmental sustainability, this review concisely introduced up to date WH utilization specifically in pollution remediation and curbing the global warming crisis and discussed the underlying mechanisms.

The colonization of freshwater lakes by invasive alien species is increasingly alarming primarily owing to nutrient loads from the watersheds. For the sustainable management of invasive weeds, preventive methods, such as watershed management and sustainable agricultural practices, are recommended. Watershed protection activities by the upstream local community are believed to be effective measures to reduce nutrient loading to the receiving water bodies and hence help prevent the spread of water hyacinth. However, their willingness and potential contributions determine the effectiveness of watershed management activities. The objective of this study is, therefore, to evaluate the preferences and contributions (willingness to pay and willingness to contribute labor) of the local community for the management of water hyacinth in Lake Tana (Ethiopia). A contingent valuation method for a hypothetical market "prevention of water hyacinth infestation of Lake Tana through watershed management program" was used to collect data from 560 randomly selected households. A multivariable interval regression model was used to identify factors affecting the contribution of local people. The mean yearly willingness to pay and to contribute labor of the respondents was 435.4 Ethiopian Birr (US$ 10) and 22.4 man-days, respectively. The place of residence (rural/urban), educational level, private farm plot area, annual income, and water hyacinth-related conference participation significantly influenced the willingness to pay. Similarly, the willingness to contribute labor was strongly associated with place of residence, location, educational level, and household family size. The economic value derived from this study reflects community preferences, which could be an input for informed and evidence-based decision-making regarding the prevention of weed expansion and sustainable use of ecosystem services. Therefore, local, regional, and national authorities are advised to mobilize the local community to contribute labor and/or money so as to halt the expansion of the weed., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Water hyacinth is an aquatic weed species that grows rapidly. In particular, it causes negative impacts on the aquatic environment and ecological system. However, water hyacinth is rich in cellulose, which is a biodegradable material. This study isolated cellulose from the water hyacinth petiole. It was then used to fabricate composite hydrogels made with water hyacinth cellulose (C), alginate (A), and pectin (P) at different mass ratios. The selected water hyacinth cellulose-based hydrogel was incorporated with quercetin, and its properties were evaluated. The FTIR and XRD of extracted water hyacinth cellulose indicated specific characteristics of cellulose. The hydrogel which consisted of the water hyacinth cellulose alginate characterized pectin: pectin had a mass ratio of 2.5:0.5:0.5 (C 2.5 A 0.5 P 0.5 ), showed good puncture strength (2.16 ± 0.14 N/mm 2 ), the highest swelling index (173.28 ± 4.94%), and gel content (39.35 ± 0.53%). The FTIR showed an interaction between water hyacinth cellulose and quercetin with hydrogen bonding. The C 2.5 A 0.5 P 0.5 hydrogel containing quercetin possessed 92.07 ± 5.77% of quercetin-loaded efficiency. It also exhibited good antibacterial activity against S. aureus and P. aeruginosa due to hydrogel properties, and no toxicity to human cells. This study indicated that water hyacinth cellulose-composited hydrogel is suitable for topical antibacterial applications.

Water contamination is emerging as the most critical global issues in the world, calling for the treatment eco-techniques. Taking advantage of biowastes as adsorbent materials is not only in accordance with the purpose of environmental protection but also enhance the higher value-added products. In this work, water hyacinth ( Eichhornia crassipes ) powder was used as an efficient adsorbent for the removal of crystal violet from aqueous solutions. The structure of water hyacinth powder adsorbent was characterized by Fourier transform infrared spectroscopy and scanning electron microscopy analysis. Based on the central composite rotatable design and response surface methodology, the effect of different parameters such as initial pH solution, contact time, adsorbent dosage, and initial crystal violet concentration was optimized. The maximum adsorption capacity of 180.336 mg/g was achieved under the optimum condition as initial pH solution of 6.246, contact time of 125.698 min, the adsorbent dosage of 1.382 g/L, and initial dye concentration of 615.865 mg/L. Moreover, the Langmuir isotherm provided the best fit with a high correlation coefficient of 0.9981 and a maximum monolayer adsorption capacity of 181.818 mg/g at 30 °C. The kinetic studies indicated that the pseudo-second-order model was adequately applied for the adsorption kinetic of crystal violet on the water hyacinth powder adsorbent. The utilization of the water hyacinth plant, an abundant species, as a low-cost biosorbent to remove crystal violet using the central composite rotatable design combined with response surface methodology approach is recommended for the real treatment of organic dyes., Competing Interests: Conflicts of interestThe authors declare that there are no conflicts of interest., (© King Fahd University of Petroleum & Minerals 2022, Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.)

Present study focused on the thermo-chemical potential of waste biomass of Eichhornia crassipes or water hyacinth root (WHR). The pyrolysis-kinetic parameters are investigated using thermo-gravimetric analysis at the various heating rates (5, 10, 15, and 20 °C/min). Three model-free techniques, Flynn-Wall-Ozawa (FWO), Kissinger-Akahira-Sunose (KAS), and Starink, were used for the thermal kinetic analysis of biomass. The average activation energy for WHR biomass was determined using KAS, FWO, and Starink, with the values of 57.87, 64.69, and 58.27 kJ/mol, respectively. From the study it is observed that the roots of water hyacinth have rich in carbon, oxygen and hydrogen composition around 24%, 70% and 4% respectively. The higher heating value of water hyacinth root was observed around 15 MJ/kg., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Inc. All rights reserved.)

ABSTRACT To address the inadequate removal of antibiotic resistance genes in wastewater treatment plants, this study investigated the impact of bioaugmentation with dried Eichhornia crassipes roots on removal of antibiotics sulfamethoxazole, tetracycline and erythromycin from pharmaceutical wastewater while optimizing potential for reclaiming value through biogas production, utilizing an anaerobic membrane bioreactor (AnMBR). Three sets of AnMBRs were set up for the experiment, C1 (inoculum), C2 (inoculum + antibiotics) and EC (inoculum + antibiotics +  E. crassipes ). The results showed that E. crassipes mitigated some of the toxic effects of antibiotics on the microbial community and prevented negative impact on the archaeal community, and significantly increased average biogas production (by 37% compared to control without antibiotics and 42% compared to control with antibiotics) as well as antibiotics removal. Furthermore, bioaugmented reactor showed significant reduction of erythromycin (97%) and tetracycline (83%) concentrations in effluent. Utilization of E. crassipes root offers a simple yet powerful tool for preventing the emergence of antimicrobial resistance and dissemination of such pollutants into the environment.