Search

In this study, the effect of ultrasound-assisted non-covalent binding of different polyphenols (tannins, quercetin, and resveratrol) on the structure and functional properties of myofibrillar proteins (MP) from the golden threadfin (Nemipterus virgatus) was investigated. The effect of ultrasound-assisted polyphenol incorporation on the structure and properties of MP was evaluated by multispectral analysis, interfacial properties, emulsification properties and antioxidant properties et al. The results revealed that the protein-polyphenol interaction led to a conformational change in the microenvironment around the hydrophobic amino acid residues, resulting in an increase in the equilibrium of the MP molecules in terms of affinity and hydrophobicity. Ultrasound assisted polyphenols addition also led to a significant decrease of the oil/water interfacial tension (from 21.22 mN/m of MP to 8.66 mN/m of UMP-TA sample) and a significant increase of the EAI (from 21.57 m 2 /g of MP to 28.79 m 2 /g of UMP-TA sample) and ES (from 84.76 min of MP to 124.25 min of UMP-TA). In addition, ultrasound-assisted polyphenol incorporation could enhance the antioxidant properties of MP, with the DPPH and ABTS radical scavenging rate of UMP-TA increase of 47.7 % and 55.2 % in comparison with MP, respectively. The results demonstrated that the noncovalent combination with polyphenols under ultrasound-assisted conditions endowed MP with better functional properties, including solubility, emulsification, foaming, and antioxidant properties through structure change. This study can provide innovative theoretical guidance for effectively preparing aquatic protein-polyphenol non-covalent complexes with multiple functions and improving the processing and utilization value of aquatic proteins., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Our study aimed to optimize carob antioxidant extraction for use in the food, cosmetic, and pharmaceutical industries. Maceration investigated ethanol concentration, extraction temperature, and time, while ultrasound-assisted extraction examined ethanol concentration, ultrasound power, and time. A central composite design with 19 experimental points assessed the influence of variables on total yield, total phenolic content, and antioxidant activity. The results were analyzed to optimize the extraction parameters and enhance the antioxidant extraction from carob. The results of the study show that the best maceration condition for extracting antioxidants from the plant material was found to have a time of 24.38 minutes, an ethanol content of 59.02%, and a temperature of 54.52°C. Similarly, the optimal conditions for ultrasound-assisted extraction were found to be 51.49 minutes, 79.78% sonication power, and 76.12% alcohol. The optimal conditions identified can be used as a starting point for further optimization and scaling up of the extraction process.

Synthetic routes of chromene are an area of thrust research due to its wide application as pigments, agrochemicals, cosmetics, and an important nucleus scaffold for various pharmaco-logically active drugs. The chromene nucleus is an important moiety for the discovery of new drug candidates owing to its broad range of pharmacological actions like antitumor, anti-inflammatory, antiviral, and many others. However, traditional synthesis techniques frequently use unsafe reagents and produce hazardous waste, presenting environmental issues. The eco-friendly production of chromene derivatives utilizes sustainable raw materials, non-toxic cata-lysts, and gentle reaction conditions to reduce ecological consequences. Innovative methods like microwave irradiation, ultrasound synthesis, the use of environmentally friendly solvents, a cata-lyst-based approach with minimal environmental impact, and mechanochemistry-mediated syn-thesis are implemented. These approaches provide benefits in scalability, cost-effectiveness, and ease of purification. This review compiles and presents various recently reported green synthetic strategies of chromene and its derivatives and gives the reader a clear idea of the detailed and crit-ical aspects of various synthetic protocols described., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

Objectives: To investigate the causes of space-occupying tumor bed cysts formed early after glioma resection by measuring the osmotic pressure gradient between cystic fluid, serum, and cerebrospinal fluid (CSF) and propose a new method of bedside ultrasound-assisted puncture and drainage (UAP&D) under local anesthesia for treatment., Methods: Bedside UAP&D under local anesthesia was performed through a burr hole on the skull flap.Following a successful puncture, cystic fluid was collected, while blood and CSF were obtained through vein and lumbar puncture, respectively. The osmotic pressure of all fluids collected was measured. The appearance, biochemical composition, and results of microbial culture of cystic fluid and CSF were analyzed. Within 24 h after UAP&D, a CT examination and Glasgow coma scale (GCS) were assessed., Results: The osmotic pressure of cystic fluid was higher than that of serum and CSF. White blood cell count and protein concentration were higher in the cystic fluid compared to the CSF. Conversely, the concentration of chloride ions and glucose were lower. CT scan confirmed the correct placement of the cysts' drainage tube and that the cysts' volume decreased significantly with continued drainage. Accompanied by a reduction in the volume of cysts, there were significant improvements in GCS score within 24 h after UAP&D. All drainage tubes were removed within 2-5 days, and no puncture tract hemorrhage or infection was observed., Conclusion: The osmotic pressure gradient between cystic fluid, serum, and CSF caused the formation of early post-operative space-occupying tumor bed cysts for glioma. UAP&D aligns with the concept that micro-invasive neurosurgery is an effective treatment method for such cysts., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Ultrasound-assisted extraction (UAE) method proves to be more effective compared to traditional extraction methods. In the present study, response surface methodology (RSM) was used to determine the optimal process parameters for extracting polysaccharides (U-MCP) from jaboticaba fruit using UAE. The optimum extraction conditions were ultrasonic time 70 min, extraction temperature 60 °C, and power 350 W. Under these conditions, the sugar content of U-MCP was 52.8 %. The molecular weights of the ultrasound-assisted extracted U-MCP ranged from 9.52×10 2 to 3.27×10 3  Da, and consisted of five monosaccharides including mannose, galacturonic acid, glucose, galactose, and arabinose. Moreover, in vitro antioxidant and hypoglycaemic assay revealed that U-MCP has prominent anti-oxidant activities (1,1-diphenyl-2-picryl-hydrazyl (DPPH) radicals, hydroxyl radicals and 2,2'-Azinobis (3-ethylbenzothiazoline-6-sulfonic Acid Ammonium Salt) (ABTS) radicals scavenging activities) and hypoglycemic activities (α-amylase and α-glucosidase inhibition activities)., (© 2024 Wiley-VHCA AG, Zurich, Switzerland.)

Research and development of high-performance catalysts is a key technology to realize hydrogen energy storage and transportation based on liquid organic hydrogen carriers. Co/beta was prepared using beta zeolite as a carrier via an electrostatic adsorption (ESA)-chemical reduction method, and it was used as the template and reducing agent to prepare bimetallic catalysts via an ultrasonic assisted galvanic replacement process (UGR). The fabricated PdCo/beta were characterized by TEM, XPS, FT-IR, XRD, H 2 -TPR, and H 2 -TPD. It was shown that the ultrafine PdCo nanoparticles (NPs) are evenly distributed on the surface of the beta zeolite. There is electron transfer between metal NPs and strong-metal-support-interaction (SMSI), which results in highly efficient catalytic dodecahydro-N-ethylcarbazole (12H-NEC) dehydrogenation performance of PdCo bimetallic catalysts. The dehydrogenation efficiency reached 100 % in 4 h at 180 °C and 95.3 % in 6 h at 160 °C. The TOF of 146.22 min -1 is 7 times that of Pd/beta. The apparent activation energy of the reaction is 66.6 kJ/mol, which is much lower than that of Pd/beta. Under the action of ultrasonic waves, the galvanic replacement reaction is accelerated, and the intermetal and metal-carrier interactions are enhanced, which improves the catalytic reaction performance., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier B.V. All rights reserved.)

Thiazines are a sizable class of organic heterocycles that are notable for their skeletal versatility and relative chemical simplicity, making them among the most flexible sources of biologically active compounds. The term "green synthesis" refers to implementing energy-efficient procedures for the nature-friendly production of materials and chemicals using green solvents, catalysts, and suitable reaction conditions. Considering the importance of green chemistry and the outstanding therapeutic profile of thiazines, the present work was designed to review the recent advances in green chemistry-based synthetic strategies of thiazine and its derivatives. The green synthetic approaches, including microwave-assisted, ultrasound-assisted, and various other synthetic methods for thiazine and its derivatives, were discussed and generalized. In addition, applications of thiazine and its derivatives in pharmaceutical sciences were explained with examples of marketed drugs.The discussed sustainable synthetic methods for thiazines and their derivatives could be useful in developing other medicinally important lead molecules. They could also aid in developing new synthetic schemes and apparatuses that may simplify chemical manufacturing processes and enable novel reactions with minimal by-products while questing for optimal, green solvents. This review can help anyone interested in this fascinating class of heterocycles to make decisions about selecting targets and tasks for future research., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

Clean and fast extraction of tin from the surface of tinplate scraps is of great significance for the efficient utilization of waste resources. However, the dense tin layer causes the low efficiency of conventional leaching process. To improve Sn leaching efficiency, the ultrasound technique was adopted to extract Sn from tinplate scraps by alkaline leaching in this study. In the NaOH-H 2 O 2 leaching system, metallic tin and alloyed tin in Fe-Sn alloy located on the surface of tinplate scraps can be oxidized and transferred to soluble Na 2 SnO 3 , while the iron in Fe-Sn alloy was oxidized to oxides which were chemically inert in alkaline solution. The differences in chemical solubility of Sn and Fe, and solubleness of stannate and iron oxides gave rise to the selective separation of Sn from the tinplate scraps. The effects of the leaching parameters on the Sn leaching behaviors in conventional and ultrasound-assisted leaching processes were compared. The conventional leaching temperature and time were significantly reduced during the ultrasound-assisted leaching process. Almost all of Sn can be extracted after conventional leaching at 1 mol/L NaOH, temperature of 80 ℃ and time of 60 min, however the same Sn leaching effect can be achieved by ultrasound-assisted leaching at 60 ℃ for 30 min with ultrasound power of 60% (360 W). Sn leaching kinetics based on the plate model demonstrated the reaction rate constant of the ultrasound-assisted leaching was 70% higher than that of the conventional leaching. A novel acoustoelectric synergy effect underlying intensifying mechanism by ultrasound irradiation was proposed in this study. Eventually, this work provided a rapid and clean tin extraction method from tinplate scraps via the ultrasound-assisted alkaline leaching treatment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Author(s). Published by Elsevier B.V. All rights reserved.)

The utilization of agricultural residues to obtain biocompounds of high-added value has significantly increased in the past decades. The conversion of agro-based residues into valuable products appears to be an economically efficient, environment-friendly, and protracted waste management practice. The implementation of ultrasonic technologies in the conversion of value-added goods from agricultural waste materials through pre-treatment and valorization processes has imparted many advantageous effects including rapid processing, effective process performance, minimization of processing steps, minimal dependency on harmful chemicals, and an increased yield and properties of bio-products. To further enliven the literature and inspire new research investigations, this review covers the comprehensive work including theoretical principles, processes, and potential benefits of ultrasonic treatment technologies to assist the production of bio-products which emphasize the extraction yield and the characteristic of the end-product extracted from agriculture residues. A detailed evaluation of these methods and key aspects impacting their performance as well as the features and shortcomings of each ultrasound-assisted approach is also discussed. This review also addressed some of the challenges associated with using ultrasonic irradiation and proposed several potential techniques to maximize productivity. Understanding the concept of ultrasonication technique allow the academician and industrial practitioners to explore the possibility of applying a greener and sustainable approach of biomass extraction to be translated into higher scale production of commercial products., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier B.V. All rights reserved.)

An efficient decolorization method for ginseng residue oligosaccharides (GROs) using ultrasound-assisted D392 macroporous resin was developed. The decolorization effects and color differences of activated carbon adsorption, hydrogen peroxide oxidation, and resin adsorption were evaluated. The optimal conditions of the three decolorization methods for static, dynamic, ultrasound-assisted resin adsorption were compared. The results showed that ultrasound-assisted decolorization had the best decolorization effect of greatly decreasing the decolorization time to 80 min. Color difference analysis revealed the process of pigment removal during GRO decolorization. The UV-visible full-wavelength scan showed that most pigments were removed after decolorization. The characterizations by the Fourier-transform infrared spectroscopy and X-ray diffraction analysis showed that the chemical structure and crystallinity of the GROs did not change upon decolorization. In addition, the molecular weight distribution did not change significantly. This research contributes to further exploration of the structures and functions of GROs., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Aim: This retro-prospective observational study described the experience in lumbar puncture procedures in children with spinal muscular atrophy (SMA) with and without neuromuscular scoliosis in a single center. The technical feasibility of intrathecal nusinersen administration was the main limiting factor., Study Design: A total of 457 technically successful intrathecal injections based on a hierarchical strategy in Cobb angle were reviewed in 81 SMA children aged 0.75-13.5 years who were referred for nusinersen injections in our hospital from October 2019 to December 2022., Results: Under local anesthesia, conventional lumbar puncture was performed on 47 patients without spinal deformity (Cobb angle of 0-10°) and 20 patients with moderate scoliosis (Cobb angle of 10-50°). Ultrasound-assisted lumbar puncture was performed on 12 patients with moderate scoliosis but lordosis. A combination of ultrasound imaging and three-dimensional CT under sedation was performed in the remaining 14 patients with severe scoliosis (Cobb angle >50°). No severe complications were found., Conclusion: Cobb angle is an important basis for intrathecal administration of nusinersen. It is feasible and suitable to carry out intrathecal nusinersen injection under ultrasound combined with three-dimensional CT imaging for children with severe scoliosis., Competing Interests: Declaration of competing interest The authors declare that they have no conflict of interest., (© 2023 Published by Elsevier Ltd on behalf of European Paediatric Neurology Society.)

Background: In this study, ultrasonic-assisted reverse micelles were used to extract tea protein from tea residues. First, the extraction conditions of ultrasonic power, ionic strength and pH were optimized by response surface methodology. Then, structural comparison of ultrasonic-assisted reverse micelle extraction of tea protein (UARME) and ultrasonic-assisted alkali extraction (UAAE) were performed using scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy and amino acid composition., Results: The optimum process conditions were determined as follows: ultrasonic power 300 W, KCl 0.15 mol L -1 , pH 8. The extraction rate was 46.29%, which was close to the theoretical value (46.44%). SEM showed that the protein particles extracted by UARME were smaller than those by UAAE. The results of FTIR spectroscopy showed that the protein extracted by UARME had higher α-helix, β-sheet and β-turn, and the contents were 20%, 62.3% and 17.1%, respectively. The content of random coil was 0%, which was significantly lower than that of alkali extraction, indicating that the secondary structure of protein extracted by UARME was more orderly. By comparing the amino acid composition of the two methods, the amino acid content of tea protein extracted by UARME was significantly higher than that of UAAE., Conclusion: The biological activity of tea protein is closely related to its structure. Compared with alkali extraction, reverse micelles can better protect the secondary structure of proteins, which is of great significance for studying their functional properties. © 2022 Society of Chemical Industry., (© 2022 Society of Chemical Industry.)

The study evaluated the effect of an ultrasound-assisted treatment on the structural and functional properties of sheep bone collagen (SBC). The type and distribution of SBC were analyzed by proteome (shotgun) technology combined with liquid chromatography-tandem mass spectrometry. Compared with pepsin extraction, the ultrasound-assisted treatment significantly increased the collagen extraction rate by 17.4 pp (P < 0.05). The characteristic functional groups and structural integrity of collagen extracted by both methods were determined via Fourier transform infrared spectroscopy, ultraviolet absorption spectroscopy, and fluorescence spectroscopy. Circular dichroism spectra revealed that the ultrasound-assisted pretreatment reduced α-helix content by 1.6 pp, β-sheet content by 21.9 pp, and random coils content by 28.4 pp, whereas it increased β-turn content by 51.9 pp (P < 0.05), compared with pepsin extraction. Moreover, ultrasound-assisted treatment collagen had superior functional properties (e.g., solubility, water absorption, and oil absorption capacity) and foaming and emulsion properties, compared with pepsin extraction. Furthermore, the relative content of type I collagen in ultrasound-assisted extracted SBC was highest at 79.66%; only small proportions of type II, VI, X, and XI collagen were present. Peptide activity analysis showed that SBC had potential antioxidant activity, dipeptidyl peptidase 4 inhibitory activity, and angiotensin-converting enzyme inhibitory activity; it also had anticancer, antihypertensive, anti-inflammatory, and immunomodulatory effects., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier B.V. All rights reserved.)

According to the advantages of ultrasonic vibration cutting, an ultrasound-assisted corneal trepanation robotic system is developed to improve the accuracy of corneal trephination depth and corneal incision quality in corneal trephination operations. Firstly, we analyzed the reasons for the difficulty in controlling the depth of trephination in corneal transplantations from the perspective of the biomechanical properties of the cornea. Based on the advantages of ultrasonic vibration cutting, we introduced an ultrasonic-vibration-assisted cutting method for corneal trephination and analyzed the cutting mechanism. Secondly, we described the surgical demands of corneal trephination and listed the design requirements of a robotic system. Thirdly, we introduced the design details of said system, including the system's overall structure, the ultrasound-assisted end effector, the key mechanisms of the robotic system, and the human-machine interaction interface. We designed the end effector based on ultrasonic vibration cutting and its eccentric adjustment system in an innovative way. Additionally, we then presented a procedure for robot-assisted corneal trephination. Finally, we performed several cutting experiments on grapes and porcine eyeballs in vitro. The results show that, compared with manual trephine, ultrasound-assisted corneal trephination has a better operation effect on the accuracy of corneal trephination depth and corneal incision quality.

Pyrimidines serve as key structural components in chemical frameworks and biological processes. Several pyrimidine analogues have been produced over the years by means of traditional methods that necessitated large amounts of solvents, reagents, and, most importantly, additional time, which has led them to become prohibitive. These procedures are now being replaced with more cost-effective adaptive methodologies that incorporate one-pot synthesis and greener approaches involving various green solvents and catalysts. The current review covers a number of green synthetic techniques, including ultrasound-assisted synthesis, visible light irradiation synthesis, solvent-free synthesis, catalyst-free synthesis, microwave-assisted synthesis, and green catalyst synthesis for the synthesis of pyrimidine derivatives. Accordingly, it integrates different strategies to synthesize heterocyclic pyrimidine analogues in a well-organized manner., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

N-ethylcarbazole/dodecahydro-N-ethylcarbazole (NEC/12H-NEC) is one of the most attractive LOHCs, and it is of great significance to develop catalysts with high activity and reduce the hydrogen storage temperature. Layered double hydroxides-carbon nanotubes composites (LDH-CNT) were synthesized by a simple in-situ assembly method. Due to the introduction of CNT, a strong interaction occurred between LDH and CNT, which effectively improved the electron transfer ability of LDH-CNT. Ru/LDH-CNT catalysts were prepared via ultrasound-assisted reduction method without adding reducing agents and stabilizers. Under the cavitation effect of ultrasound, the hydroxyl groups on the surface of LDH were excited to generate hydrogen radicals (•H) with high reducibility, which successfully reduced Ru 3+ to Ru NPs. Ru/LDH-3.9CNT-(300-1) catalyst was of 1.63 nm average Ru particle size with CNT amount of 3.9 wt% and the ultrasonic power of 300 W at 1 h, and its electron transfer resistance was less than that of Ru/LDH-(300-1). The synergy of ultrafine Ru NPs and fast electron transfer made it exhibit exceptional catalytic performance in NEC hydrogenation. Even if the reaction temperature was lowered to 80 °C, its hydrogenation performance was better than that of commercial Ru/Al 2 O 3 catalyst at 120 °C. The ultrasound-assisted method is efficient, green and environmentally friendly, and the operation process is simple and economical. It is expected to be used in practical industrial production, which provides a reference for the preparation of high-activity and low-temperature hydrogen storage catalysts., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 The Author(s). Published by Elsevier B.V. All rights reserved.)

Plant proteins with improved solubility, foaming, and emulsifying properties are required to meet the demand for plant-based foods. This study evaluated the influence of alkaline extraction combined with enzyme- and ultrasound-assisted extraction on lentil protein structure and functionality. Enzyme- and ultrasound-assisted extractions were not capable of increasing the protein yield compared to alkaline extraction alone. However, the purity of isolated protein was dependent on the extraction process, ranging from 82.7% to 90%. Although the molecular mass, zeta potential profiles, and denaturation temperature were not dependent on the extraction method, the enthalpy of denaturation for protein obtained solely by alkaline extraction was significantly lower than that for assisted processes, indicating that protein denaturation is caused by an alkaline process. Changes in protein structure were also suggested by solubility analyses that showed that lentil proteins obtained by enzyme-assisted and ultrasound-assisted extraction have better solubility at pH 7 when compared to alkaline extraction alone. The surface activity of lentil protein was evidenced by interfacial and surface analysis, and it was influenced by the extraction process applied. We demonstrated that combining alkaline extraction with assisted processes, especially ultrasound technology, results in concentrates/isolates with higher solubility as compared to ones obtained solely by the traditional alkaline method, even though the choice of extraction method should depend on the desired functionality., Competing Interests: The authors declare no conflict of interest., (© 2022 Published by Elsevier Ltd.)

The search for renewable energy sources to replace fossil fuel has made lignin a promising carbon-containing resource. In this paper, LaNiO 3 perovskite catalyst supported by mesoporous carrier with specific pore structure was prepared by the pore filling of MCM-41 with citrate complex precursors of nickel and lanthanum. Then the catalysts applied to maize straw lignin depolymerization. The results of low-angle XRD, N 2 adsorption-desorption, IR spectroscopy and SEM confirmed that the catalyst has been successfully manufactured. Based on the yield of phenolic monomer, low molecular weight lignin derived bio-oil and high molecular weight lignin derived bio-oil as standard, the catalyst showed best catalytic effect when the reaction temperature was 250 °C, the reaction time was 6 h, the ratio of lignin to catalyst mass was 5: 1 and with ultrasonic assist. The yield of phenolic monomer was 11.46 wt% and that of bio-oil was 68.0 wt%. In general, this method is an excellent embodiment of the principle of Lignin-first as well as an excellent strategy for the production of value-added phenolics and high-quality bio-oils from lignin. It plays an important role in promoting the high value utilization of lignin in the future., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Zirconium-2,6-naphthalenedicarboxylate metal-organic framework (Zr-NDC MOF) was prepared using ultrasound-assisted synthesis and tested for the adsorptive removal of crystal violet (CV) dye from aqueous solution. The pristine Zr-NDC was characterized using powder X-ray diffraction, scanning electron microscopy, thermogravimetric analysis, and energy-dispersive X-ray spectroscopy, Fourier-transform infrared, elemental analysis, and dynamic light scattering techniques. The maximum percentage removal of CV dye was found to be 99.45% with an initial dye concentration of 10 mg L -1 . The kinetics and adsorption isotherm models were used to investigate the removal of CV dye from aqueous solution using Zr-NDC. Langmuir adsorption isotherm model (R 2 = 0.9880) describes the adsorption of CV dye onto Zr-NDC and the maximum equilibrium adsorption capacity (454.2 mg g -1 ) was achieved with the CV dye having an initial concentration of 100 mg L -1 . The adsorption was found to follow pseudo-second-order kinetics (R 2 = 0.9960) with a rate constant of 6.52 × 10 -4 g mg -1 min -1 . The effect of various parameters such as dye concentration, contact time, pH of dye solution, and MOF dose on the adsorption of dye was investigated. The study proved that the Zr-NDC is a promising adsorbent in the removal of CV dye from aqueous solution., (© TÜBİTAK.)

Background: Thoracic epidural placement (TEP) using the conventional anatomic landmark-based technique is technically challenging, may require multiple attempts, and is associated with a high failure rate (12-40%). We hypothesized that real-time ultrasound guidance would be superior in the "first-pass" success rate of TEP, when compared with the conventional technique., Methods: This prospective, randomized, superiority trial was conducted in a University hospital, and recruited 96 patients undergoing elective major abdominal or thoracic surgery and scheduled to receive a TEP for postoperative analgesia. Patients were randomly allocated to receive TEP using either the conventional technique (Gp-Conv, n = 48) or real-time ultrasound guidance (Gp-Usg, n = 48). The success of TEP was defined as eliciting loss of resistance technique and being able to insert the epidural catheter. The primary outcome variable was the "first-pass success rate" meaning the successful TEP at the first needle insertion without redirection or readvancement of the Tuohy needle. The secondary outcomes included the number of skin punctures, number of attempts, the overall success rate, TEP time, and total procedure time., Results: The first-pass success rate of TEP was significantly higher (p = 0.002) in Gp-Usg (33/48 (68.8%); 95%CI 55.6 to 81.9) than in Gp-Conv (17/48 (35.4%); 95%CI 21.9 to 49.0). There was no statistically significant difference (p = 0.12) in the overall success rate of TEP between the 2 study groups (Gp-Usg; 48/48 (100%) vs. Gp-Conv; 44/48 (91.7%); 95%CI 83.9 to 99.5). Ultrasound guidance reduced the median number of skin punctures (Gp-Usg; 1 [1, 1] vs Gp-Conv; 2 [1, 2.2], p < 0.001) and attempts at TEP (Gp-Usg; 1 [1, 2] vs Gp-Conv; 3 [1, 7.2], p < 0.001) but the procedure took longer to perform (Gp-Usg; 15.5 [14, 20] min vs Gp-Conv; 10 [7, 14] min, p < 0.001)., Conclusions: This study indicates that real-time ultrasound guidance is superior to a conventional anatomic landmark-based technique for first-pass success during TEP although it is achieved at the expense of a marginally longer total procedure time. Future research is warranted to evaluate the role of real-time ultrasound guidance for TEP in other groups of patients., Trial Registration: Thai Clinical Trials Registry; http://www.thaiclinicaltrials.org/ ; Trial ID: TCTR20200522002 , Registration date: 22/05/2020., (© 2022. The Author(s).)

In this study, chitosan(CS), nano-silicon aerogels(nSA) and tea polyphenols(TP) were used as film-forming materials and processed with ultrasonication to form films using the tape-casting method. The effects of ultrasonication time, temperature and frequency on the properties of CS/nSA/TP film were explored via material property testing. The results of response surface showed that the maximum tensile strength of the film was 4.036 MPa at ultrasonication time(57.97 min), temperature(37.26 °C) and frequency(30 kHz). The maximum elongation at break of the film was 279.42 % at ultrasonication time(60.88 min), temperature(39.93 °C) and frequency(30 kHz). Due to cavitation and super-mixing effects, ultrasonication may make the surface of the film smoother and easier to degrade. After ultrasonication, TPs were protected by the 3D network structure composed of CS and nSA. Ultrasonication improved the antioxidant and antibacterial properties of the film. These results show that ultrasonication is an effective method to improve the properties of films., (Copyright © 2022 The Authors. Published by Elsevier B.V. All rights reserved.)

Cyclodextrin metal-organic framework by ultrasound-assisted rapid synthesis for caffeic acid (CA) loading and antibacterial application (U-CD-MOF) was successfully studied and this method shortened the preparation time to a few minutes. It was found that the ultrasonic power, reaction time and temperature would affect the morphology and size of the obtained crystal. Under the optimal conditions, U-CD-MOF had a cubic structure with uniform size of 8.60 ± 1.95 μm. U-CD-MOF was used to load the antibacterial natural product CA to form the composite (CA@U-CD-MOF) and the loading rate of CA@U-CD-MOF to CA could reach 19.63 ± 2.53%, which was more than twice that of γ-CD. Various techniques were applied to characterize the synthesized crystal, including Powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and N 2 adsorption. In addition, antibacterial tests were performed on the obtained crystal. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of CA@U-CD-MOF for Escherichia coli O157: H7 (E. coli O157: H7) were both 25 mg·mL -1 , and the MIC for Staphylococcus aureus (S. aureus). was 25 mg·mL -1 . The sustained release behavior of CA@U-CD-MOF to CA in ethanol fitted well to Higuchi model and the loading of CA was supported by molecular docking results. In general, U-CD-MOF was successfully achieved by ultrasound-assisted rapid synthesis and the obtained crystal was further evaluated for potential antibacterial application., (Copyright © 2022 The Authors. Published by Elsevier B.V. All rights reserved.)

In this study, ultrasonic-assisted cellulase extraction (UCE) was applied to extract flavonoids and polyphenols from the Nymphaea hybrid flower. The extraction conditions were optimized using the response surface method (RSM) coupled with a Box-Behnken design. The crude extract of Nymphaea hybrid (NHE) was further purified using AB-8 macroporous resins, and the purified extract (NHEP) was characterized by FTIR and HPLC. In vitro activity determination by chemical method showed that NHEP displayed strong free radical scavenging abilities against the DPPH and ABTS radicals, good reduction power, and hyaluronidase inhibition. The cell viability by CCK-8 assays showed that NHEP had no significant cytotoxicity for B16 and HaCaT cells when the concentration was below 100 μg/mL and 120 μg/mL, respectively. NHEP with a concentration of 20-160 μg/mL can more effectively reduce the ROS level in H 2 O 2 damaged HaCaT cells compared with 10 μg/mL of VC. The 40 μg/mL of NHEP had similar activity against intracellular melanin production in the B16 melanoma cells compared with 20 μg/mL Kojic acid. Good activities of antioxidation, whitening and protective effect against H 2 O 2 -induced oxidative damage promote the potential for NHEP as a functional raw material in the field of cosmetics and medicine.

In this work, optimized techniques of conventional, ultrasound and microwave-assisted extraction were applied for the recovery of antioxidant compounds from lemon by-products ( Citrus limon L ). Specifically, the effect of solvent, temperature, microwave power, time and their interaction on the extraction was investigated. Among the tested solvents, the hydroalcoholic mixture (ethanol:water, 50:50) was the optimal one for all extraction techniques: in particular assisted by ultrasounds at 70 °C for 30 minutes (total phenolic content: 6.93 mg GAE g -1 , total flavonoids: 2.07 mg CE g -1 , ABTS assay: 18.36 µM TE g -1 ). Also, the other techniques allowed to obtain valuable extracts, although with relative lower amounts. The analyses of individual phenols revealed hesperidin and eriocitrin as the main compounds (respectively about 1650 and 1150 mg kg -1 ) after ultrasound assisted and conventional extraction. Results of this work can be useful to valorize an industrial by-product by sustainable techniques for the high-added value substances recovery.

This paper proposes a greener approach to the intensification of base oil recovery for truck engines (32,500 km of use) using ethanol, propan-2-ol, 2-methylpropan-1-ol, and butan-1-ol as solvents for the extraction of base oil, combining mechanical stirring (220 rpm) and ultrasound (25 °C, 24 kHz, and 400 W). The results indicated that the recovery yields of the base oil, using the mechanical stirring and ultrasound (MS-US) system, for ethanol, propan-2-ol, 2-methylpropan-1-ol, and butan-1-ol were approximately 3.1, 25.6, 71.6, and 85.5%, respectively. By contrast, the recovery yields using only mechanical stirring were 8.8, 28.9, 58.9, and 76.1%, respectively. The system with pre-extraction could effectively remove Ca (85.3-93.0%), Mg (67.2-82.9%), Na (31.7-62.5%), and Zn (0.0-71.7%). Finally, the results showed a reduction of almost 100% for the concentrations of Al, Cr, Fe, and Mo in the pre-extraction system. The mechanical stirring (5 min) and ultrasound (5 min) system were able to intensify the extraction process using environmentally friendly solvents., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

The preparation and characterization of biodegradable films based on starch-PVA-nanoclay by solvent casting are reported in this study. The films were prepared with a relation of 3:2 of starch:PVA and nanoclay (0.5, 1.0, and 1.5% w / v ), and glycerol as plasticizer. The nanoclays before being incorporated in the filmogenic solution of starch-PVA were dispersed in two ways: by magnetic stirring and by sonication. The SEM results suggest that the sonication of nanoclay is necessary to reach a good dispersion along the polymeric matrix. FTIR results of films with 1.0 and 1.5% w / v of sonicated nanoclay suggest a strong interaction of hydrogen bond with the polymeric matrix of starch-PVA. However, the properties of WVP, tensile strength, percentage of elongation at break, and Young's modulus improved to the film with sonicated nanoclay at 0.5% w / v , while in films with 1.0 and 1.5% w / w these properties were even worse than in film without nanoclay. Nanoclay concentrations higher than 1.0 w / v saturate the polymer matrix, affecting the physicochemical properties. Accordingly, the successful incorporation of nanoclays at 0.5% w / v into the matrix starch-PVA suggests that this film is a good candidate for use as biodegradable packaging.

In order to extract antioxidant phenolic compounds from spent grain (SG) two extraction methods were studied: the ultrasound-assisted method (US) and the Ultra-Turrax method (high stirring rate) (UT). Liquid to solid ratios, solvent concentration, time, and temperature/stirring rate were optimized. Spent grain extracts were analyzed for their total phenol content (TPC) (0.62 to 1.76 mg GAE/g SG DW for Ultra-Turrax pretreatment, and 0.57 to 2.11 mg GAE/g SG DW for ultrasound-assisted pretreatment), total flavonoid content (TFC) (0.6 to 1.67 mg QE/g SG DW for UT, and 0.5 to 1.63 mg QE/g SG DW for US), and antioxidant activity was measured using 2,2-diphenyl-2-picrylhydrazyl (DPPH) free radical (25.88% to 79.58% for UT, and 27.49% to 78.30% for UT). TPC was greater at a high stirring rate and high exposure time up to a certain extent for the Ultra-Turrax method, and at a high temperature for the ultrasound-assisted method. P-coumaric acid (20.4 ± 1.72 mg/100 SG DW for UT, and 14.0 ± 1.14 mg/100 SG DW for US) accounted for the majority of the phenolic found compounds, followed by rosmarinic (6.5 ± 0.96 mg/100 SG DW for UT, and 4.0 ± 0.76 mg/100 SG DW for US), chlorogenic (5.4 ± 1.1 mg/100 SG DW for UT, and non-detectable for US), and vanillic acids (3.1 ± 0.8 mg/100 SG DW for UT, and 10.0 ± 1.03 mg/100 SG DW for US) were found in lower quantities. Protocatechuic (0.7 ± 0.05 mg/100 SG DW for UT, and non-detectable for US), 4-hydroxy benzoic (1.1 ± 0.06 mg/100 SG DW for UT, and non-detectable for US), and caffeic acids (0.7 ± 0.03 mg/100 SG DW for UT, and non-detectable for US) were present in very small amounts. Ultrasound-assisted and Ultra-Turrax pretreatments were demonstrated to be efficient methods to recover these value-added compounds.

AgCl x Br 1-x composites with different halogen molar ratios (Cl/Br) were prepared by a facile ultrasound-assisted ion-exchange method. The formation of close contact between AgCl and AgBr facilitated the transportation of photoexcited charge carriers and contributed to the enhanced visible-light-driven photocatalytic degradation of different kinds of antibiotics. The AgCl x Br 1-x composites had a sphere-like morphology and tunable band gaps from 2.95 to 2.57 eV depending on Cl/Br mole ratios. Besides, the AgCl x Br 1-x composite was optimized by varying halogen mole ratios (Cl/Br) to achieve the highest photocatalytic activity. Results indicated that AgCl 0.75 Br 0.25 showed the best photocatalytic degradation performance, which was about 2.36 and 2.78 times that of the single AgCl towards ciprofloxacin (CIP) and metronidazole (MNZ) degradation, respectively. Meanwhile, a possible photocatalytic degradation mechanism was discussed, and results indicated that the holes (h + ) and •OH were the dominant active species in the AgCl 0.75 Br 0.25 system.

Ultrasound-assisted-alkali-urea (UAAU) pre-treatment of miscanthus biomass was investigated for enhanced delignification and extraction of cellulose fiber. The effects of pre-treatment conditions investigated were: sonication time (10.0, 15.0 and 20.0 min), alkali (NaOH) concentration (2.0, 3.5 and 5.0 %, w/v) and urea-concentration (1.0, 1.75 and 2.5 %, w/v) on the delignification and cellulose content. The process parameters were studied and optimized using a response surface methodology (RSM) based on the Box Behnken Design (BBD). From the RSM-BBD analysis, he optimized pre-treatment conditions were 2.1 % NaOH, 1.7 % urea and 15.5-min sonication time with maximal cellulose and lignin contents of 47.8 % (w/w) and 27.5 % (w/w) respectively. The pre-treated samples were further characterized by FTIR, colorimeter, SEM, XRD, and TGA analyses. The UAAU pre-treated samples have higher delignification and cellulose contents than the AU pre-treatment without sonication. Furthermore, the ultrasound process allowed selective removal of lignin without substantially degrading the functionalities of cellulose fiber. The UAAU pre-treated samples exhibited higher thermal stability, fibrillation, crystallinity index and smaller crystallite size., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Ultrasound-assisted melt-extrusion method (USME) is a high-quality process used to produce polymeric compounds with an adequate homogeneous dispersion. This study evaluates white-color films of linear low-density polyethylene (LLDPE) prepared using TiO 2 masterbatch obtained by ultrasound-assisted melt-extrusion at variable frequencies (USME-VF). LLDPE with three different melt-flow indices (2, 20 and 50 g/10 min) were used as the polymer matrix. The films were obtained from the dilution of masterbatches of LLDPE (melt-flow index = 2) at a concentration of 7 wt% TiO 2 . The morphology, pigmentation, TiO 2 reactivity, and the mechanical stability of the films were assessed. The masterbatch compounds were evaluated by melt-flow index (MFI) and scanning electron microscopy (SEM). The contrast ratio, yellowness index and mechanical properties of films were also measured. The properties of whiteness and elongation at break improved in the films prepared using masterbatches with higher dispersion. Though the reactivity of the TiO 2 particles increased during accelerated aging, it did not affect the elongation to rupture. The yellowness index was moderately affected in films that included TiO 2 particles processed using USME-VF.

Cuphea glutinosa is a medicinal species abundant in South of Brazil, known because of its flavonoids, which have pharmacological properties as antioxidant, anti-hypertensive, diuretic, and antimicrobial. The present study aimed to optimize the extraction and validate an ultra-performance liquid chromatographic method coupled to a photodiode array detector (UPLC-PDA) method for the quantification of a chemical marker miquelianin in C. glutinosa leaves. The optimum conditions for the extraction of miquelianin from leaves of C. glutinosa were determined using a fractional factorial design (FFD) and a central composite design (CCD). An UPLC-PDA method was validated, following the ICH guidelines and RDC 166/2017 of ANVISA (Brazil). The extraction-optimization methodology was obtained with the following parameters: plant:solvent 1:60 (w/v), percentage solvent 38% ethanol, 60 min time, five extractions and particle size ≤ 180 μm. The validation parameters of the quantification method were satisfactory. The results revealed a method with excellent selectivity, linearity, precision (repeatability and intermediate precision were below 2.18 and 1.40%, respectively) and accuracy (mean recovery 90.6%). The average content of miquelianin was 1.03%. Briefly, the optimization of the extractive method in the leaves of C. glutinosa increased the concentration of miquelianin in the crude extract and the method was validated according to the current legislation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Pyrrolizidine alkaloids (PAs) are secondary plant metabolites witch can contaminate food, especially herbs. Due to the fact that alkaloids have a strong adverse effect on human health, it is necessary to use sensitive and selective detection methods. In present study a modified method based on LC-MS/MS was developed and validated for the simultaneous determination of thirty pyrrolizidine alkaloids and their corresponding N-oxides (PANOs) in herbs samples. Sample extraction was based on ultrasound-assisted dispersive solid phase extraction and clean-up using graphene. Method validation showed that the proposed method hold good recoveries (61-128 %) for PAs/PANOs with RSD <15 %. Limits of quantification has been set at 1 μg kg -1 level for all targeted alkaloids. The optimized method yielded a small matrix effect (-20-20 %) for most PAs/PANOs. The uncertainty associated with the analytical method was not higher than 38 %. The method is operationally simple, time-saving, and can be applied to the analysis of real herb samples., (Copyright © 2020 Elsevier B.V. All rights reserved.)

In the present study, ultrasound was used to remove the residual solvent from the fragrant oil of red pepper seed obtained by subcritical propane extraction. The physical and chemical characteristics, particularly the volatile flavor compounds present of the oil before and after ultrasound-assisted desolventizing were comprehensively analyzed to determine the effect of the desolventizing process on product quality. The results showed that the maximum loss of residual solvent was achieved at a temperature of 90 °C maintained for 70 min with ultrasound applied during the entire process. After this treatment only a small amount of solvent (2.3% based on the total residual solvent originally present) remained in the oil. Although it was hypothesized that ultrasound treatment could result in the loss of volatile components, the analytical results showed no obvious reduction in the components associated with the typical aroma of the oil. After ultrasonic treatment, the oil also had good oxidation stability and quality. Additionally, after ultrasonic desolventizing, the oil samples were more suitable for cooking because they could more effectively minimize oxidation. Thus, these results demonstrate that this new ultrasonic technique is an effective and efficient method for removing the solvent remaining in fragrant oil after subcritical propane extraction., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2019 Elsevier B.V. All rights reserved.)

The aim of this study was to compare different techniques in order to achieve a high extraction of phenolic compounds from propolis. For this purpose, it was investigated the use of double maceration (24 h at room temperature with continuous agitation at 250 rpm), double microwave treatments (1 min at 140 W) and double ultrasound-assisted extraction (15 min at 20 kHz) using 70% ethanol. The extraction efficiency was measured based on extraction yield, total phenolic content, flavones and flavonol content, and flavanone and dihydroflavonol content. The ultrasonic extraction had an extraction yield higher than microwave extraction and maceration. The yield of the propolis ranged between samples and between the years of propolis harvesting. Of the twelve quantified phenolic compounds, p -coumaric acid was the most abundant (271.65 mg/g propolis)., (© Association of Food Scientists & Technologists (India) 2019.)

Introduction: The surgical treatment for Achilles tendon rupture has become very popular in the last years, because of the good outcomes and the low re-rupture rate., Aim: The aim of this study is to compare the results between open surgery and percutaneous ultrasound-assisted surgery., Methods: All patients who underwent an Achilles tendon surgical repair in the last 3 years were included, resulting in a total of 56 patients (40 M and 16 F) with an average age of 53 years. Of these patients, 36 were treated with an open suture, while 20 with a mini invasive ultrasound assisted suture. At a minimum follow-up of one year, patients were evaluated echografically, using both the Achilles Tendon Rupture Total score (ATRS) and the McComis score, and performing the ultrasounds bilaterally to assess both the structure and the diameter of tendons., Results: Both groups of patients showed an average ATRS score >80. The McComis score was 54.18 vs. 56.25 (p>0.05). Plantar flexion and dorsal flexion work were not similar (p>0.05). On average, the calf circumference of the operated side was decreased compared to the healthy side between the groups (p>0.05). The thickness of the operated tendons evaluated with ultrasound measurement compared to the average tendon, (p <0.05)., Conclusion: The ultrasound-assisted tenorrhaphy is a reliable treatment with good clinical and functional outcomes; anyway, the percutaneous technique and the open surgery show similar results., Competing Interests: All authors disclose any financial and personal relationships with other people or organizations that could inappropriately influence (bias) their work. Examples of potential conflicts of interest include employment, consultancies, stock ownership, honorarium, paid expert testimony, patent applications/registrations, and grants or other funding.

Salvia miltiorrhiza has been widely used in Asia for medicinal purposes for >1000 years due to the high levels of bioactive constituents it contains. In this study, a simple and rapid ultrasound-assisted liquid extraction (5 min) was applied for the extraction of these bioactive constituents. The extracts were analyzed by using rapid ultrahigh performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) with simultaneous positive and negative electrospray ionization in a single analytical run. Eight analytes were separated within 2.2 min during 6 min of run time with UHPLC-MS/MS operated in multiple reaction monitoring (MRM) mode. The concentration of salvianolic acids and tanshinones in the different organs of different varieties of Salvia miltiorrhiza ranged from 6.4 to 382.1 mg/g and 0.03 to 31.7 mg/g, respectively. To the best of our knowledge, this is the first report to characterize the tanshinone compounds found in the flower and stem/leaf of Salvia miltiorrhiza by UHPLC-MS/MS., (Copyright © 2018 Elsevier B.V. All rights reserved.)

A facile sonochemical route for the synthesis of benzo[1,3]thiazine derivatives via a one pot, multicomponent, intramolecular CH activation reaction from isocyanides, aniline and benzoyl (acetyl) isothiocyanate adduct catalyzed by copper (I) iodide in acetone at 30 °C have been reported. The advantages of the described method include using simple and readily available starting materials and performing under mild copper-catalytic reaction conditions and also obtaining pure product with high yield without applying column chromatography. Furthermore, using the sonochemical methodology as an efficient method led to reduce the reaction times., (Copyright © 2018 Elsevier B.V. All rights reserved.)

The process to fast recovery of silver from the spent symbiosis lead-zinc mine enhanced by ultrasound has been developed. A system composed of thiosulfate and the spent symbiosis lead-zinc mine under ultrasound radiation is researched and compared with regular methods to prove the superiority of ultrasound enhanced leaching. Oxygen is not provided by the usual way but by the cavitation of ultrasound, and the effect of ultrasonic enhanced leaching is more obvious than oxygen enhanced leaching effect. We are more authoritative by combining some valuable literature after conducting systematic experiments. The process mechanism was analyzed by fire assaying, XRD, XRF, SEM and EDS. The optimal conditions were found out through single factor experiments: stirring rate of 300 rpm, thiosulfate concentration of 75 g/L, leaching temperature of 303 K, PH of 5, leaching time of 2 h and the ultrasound power of 100 W. And the leaching rate is 77.34% under the best conditions. When the ultrasonic experiment has the same parameters as the normal, the leaching rate at five minutes under ultrasonic conditions was 73.88%, while the leaching rate was only 72.51% at two hours under normal conditions. The apparent activation energy under conventional and ultrasonic conditions is 12.47 kJ/mol and 12.35 kJ/mol, respectively, and it is proved that both are controlled by diffusion., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Quality parameters of açai juice processed with ultrasound-assisted, ozone and the combined methods were analyzed in this work. Two ultrasound energy densities (350 and 700 J·mL -1 ) and two ozonization times (5 and 10 min with 1.5 ppm) were analyzed for pure açai juice and 8 different treatments (2 2 complete factorial). To evaluate the quality parameters of the juice, physical-chemical analyzes such as pH, titratable acidity, cloud value, non-enzymatic browning, rheology, antioxidant activity (DPPH and ABTS), phenolic compounds, anthocyanins, enzymatic activity (peroxidase and polyphenol oxidase) and microbial counts (mesophilic bacteria, molds and yeasts) were conducted. The treatments with ozone were better for microbial inactivation and the ultrasound for enzymatic inactivation. In general, the use of non-thermal methods can be a good alternative for the processing of açai juice., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Molecular imprinting is a powerful technology to create artificial receptors within polymeric matrices. Although it was reported for the first time by Polyakov, eighty-four years ago, it remains, nowadays, a very challenging research area. Molecularly imprinted polymers (MIPs) have been successfully used in several applications where selective binding is a requirement, such as immunoassays, affinity separation, sensors, and catalysis. Conventional methods used on MIP production still use large amounts of organic solvents which, allied with stricter legislation on the use and release of chemicals to the environment and the presence of impurities on final materials, will boost, in our opinion, the use of new cleaner synthetic strategies, in particular, with the application of the principles of green chemistry and engineering. Supercritical carbon dioxide, microwave, ionic liquids, and ultrasound technology are some of the green strategies which have already been applied in MIP production. These strategies can improve MIP properties, such as controlled morphology, homogeneity of the binding sites, and the absence of organic solvents. This review intends to give examples reported in literature on green approaches to MIP development, from nano- to micron-scale applications., Competing Interests: The authors declare no conflict of interest.

Waterborne nanoemulsion of diglycidyl ether of bisphenol A type epoxy resin (DGEBA) with droplet size of around 124nm was prepared by using an ultrasonic-assisted supercritical carbon dioxide (scCO 2 ) technique in an autoclave reactor at a low temperature (32°C). A view cell positioned in-line with the ultrasonic probe allowed observation of the emulsification process. From the image analysis and droplet size measurement, the influence mechanisms of the ultrasonic power, the degree of mixing of scCO 2 with DGEBA, the adding amount of emulsifier, and the system pressure on emulsification process and emulsion droplet size were investigated. In the emulsification process, scCO 2 penetrated into the mixture and absorbed on the DGEBA molecular. The interactions between CO 2 and the functional groups of DGEBA reduced the chain-chain interactions of polymer segments and therefore efficiently reduced the viscosity of DGEBA at a low temperature. Meantime, the cavitation and acoustic streaming of ultrasound provided a shear force for the nanoemulsification and a disturbance force for the homogeneity of the emulsion. Therefore, the combination of scCO 2 and ultrasonication made it possible to prepare a long-term stable nanoemulsion under a low temperature. This ultrasonic-assisted scCO 2 emulsification method provides an efficient and solvent-free process for the preparation of waterborne nanoemulsions of, for example, some heat-sensitive and water-insoluble active substances at low temperature., (Copyright © 2017 Elsevier B.V. All rights reserved.)

A facile and environmentally friendly strategy for grafting polymers onto the surface of multi-walled carbon nanotubes (CNTs) was demonstrated by Diels-Alder "click chemistry". Firstly, the copolymers of poly(styrene-alt-maleic anhydride) (PSM) were prepared by the reversible addition-fragmentation chain transfer (RAFT) polymerization and subsequently functionalized with furfuryl amine to introduce anchoring groups. The copolymers were then grafted on CNTs via the Diels-Alder reaction in water through a conventional heating-stirring route and ultrasound-assisted method. The obtained nanocomposite materials were characterized by thermogravimetric analysis, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, Raman spectroscopy and transmission electron microscopy. The results indicated that the reaction rate under ultrasound irradiation was accelerated about 12 times than the one under the conventional heating-stirring condition without losing the grafting efficiency. The direct functionalization of CNTs formed a stably dispersed solution in water, promising a green and effective method for industrial process., (Copyright © 2017 Elsevier B.V. All rights reserved.)

S-doped and Cu- and Co-doped TiO 2 was synthesized by a sol-gel method and characterized by FE-SEM, XRD, EDX and FTIR. The Co/Cu/S-TiO 2 nanocomposite loaded on the activated carbon as new nanoadsorbent was used for simultaneous removal of methylene blue (MB) and sunset yellow (SY) from aqueous solution by ultrasonic-assisted adsorption method. In this work, central composite design (CCD) and adaptive neuro-fuzzy inference system (ANFIS) as a support tool for examining data and making prediction are used to recognize and predict the removal percentage in MB and SY dye solution of different concentrations. The predictive capabilities of CCD and ANFIS are compared in terms of square correlation coefficient (R 2 ), root mean square error (RMSE), mean absolute error (MAE) and absolute average deviation (AAD) against the empirical data. It is found that the ANFIS model shows the better prediction accuracy than the CCD model. In addition to, the optimization of ultrasound-assisted simultaneous removal of methylene blue (MB) and sunset yellow (SY) on the Co/Cu/S-TiO 2 /AC nanocomposite by response surface methodology (RSM) for the optimization of the process variables, such as MB and SY concentrations, Co/Cu/S-TiO 2 /AC nanocomposite dose and sonication time, was investigated. Various isotherm and kinetic models were used in the experimental data. The results revealed that the langmuir isotherm and pseudo-second-order model had a better correlation than the other models., (Copyright © 2017 Elsevier B.V. All rights reserved.)

In this paper, the ultrasound-assisted leaching of iron from boron carbide waste-scrap was investigated and the optimization of different influencing factors had also been performed. The factors investigated were acid concentration, liquid-solid ratio, leaching temperature, ultrasonic power and frequency. The leaching of iron with conventional method at various temperatures was also performed. The results show the maximum iron leaching ratios are 87.4%, 94.5% for 80min-leaching with conventional method and 50min-leaching with ultrasound assistance, respectively. The leaching of waste-scrap with conventional method fits the chemical reaction-controlled model. The leaching with ultrasound assistance fits chemical reaction-controlled model, diffusion-controlled model for the first stage and second stage, respectively. The assistance of ultrasound can greatly improve the iron leaching ratio, accelerate the leaching rate, shorten leaching time and lower the residual iron, comparing with conventional method. The advantages of ultrasound-assisted leaching were also confirmed by the SEM-EDS analysis and elemental analysis of the raw material and leached solid samples., (Copyright © 2017 Elsevier B.V. All rights reserved.)

An ultra fast decopperization method from the anode slime has been developed based on the ultrasound-assisted leaching. The effects of parameters such as ultrasound power, leaching time, sulfuric acid concentration and liquid/solid ratio were investigated. Under optimum conditions, the concentration of Cu in residue was only 2.64%. The removal efficiency increases considerably and the decopperization time was significantly shortened comparing with conventional method (>10%, 24h). Se and Te have not been detected in lixivium, indicating the selective leaching of Cu. In addition, the mineralogical characteristics of the untreated anode slime and the residues after ultrasound-assisted decopperization are investigated. The results revealed that the increasing of decopperization efficiency was attributed to the change of the phase composition and the morphology and size of samples during ultrasound-assisted decopperization., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Present study is based on describing an ultrasound-assisted dispersive liquid-liquid microextraction coupled with derivative spectrophotometry (UAS-DLLME-UV-vis) as useful technique for selective determination of crystal violet (CV) and azure b (Az-B). The significant factors like pH, extractor volume, disperser value and extraction time contribution and their numerical coefficient in quadratic model were calculated according to central composite design (CCD). According to desirability function (DF) as good criterion the best experimental conditions was adjusted and selected at pH of 7.0, 170μL of chloroform, 800μL of ethanol that strongly mixed with the aqueous phase via 4min sonication. Additionally, under study system was modeled by trained artificial neural networks (ANNs) as fitness function with acceptable error of MSE 2.97×10 -06 and 1.15×10 -05 with R 2 : 0.9999 and 0.9997 for CV and Az-B, respectively. The optimum conditions by using genetic algorithm (GA) method was pH of 6.3, 160μL of chloroform, 740μL of ethanol and 4.5min sonication. Under above specified and optimize conditions, the predicted extraction percentage were 99.80 and 102.20% for CV and Az-B, respectively. The present UAS-DLLME-UV-vis procedure has minimum interference from other substances assign to the matrix, which candidate this method as good alternative to quantify under study dyes content with recoveries in the range of 86-100% for dyes. The detection limits were 2.043ngmL -1 and 1.72ngmL -1 , and limits of quantitation were 6.81ngmL -1 and 5.727ngmL -1 for CV and Az-B, respectively. The proposed methodology was successfully applied for quantification of under study analytes at different media., (Copyright © 2016 Elsevier B.V. All rights reserved.)

A new analytical method was developed for simultaneous determination of 12 pharmaceuticals using ultrasound-assisted dispersive liquid-liquid microextraction (DLLME) followed by ultra-high performance liquid chromatography with tandem mass spectrometry (UHPLC-MS/MS). Six nonsteroidal anti-inflammatory drugs (NSAIDs, ketoprofen, mefenamic acid, tolfenamic acid, naproxen, sulindac, and piroxicam) and six antibiotics (tinidazole, cefuroxime axetil, ciprofloxacin, sulfamethoxazole, sulfadiazine, and chloramphenicol) were extracted by ultrasound-assisted DLLME using dichloromethane (800 μL) and methanol/acetonitrile (1:1, v/v, 1200 μL) as the extraction and dispersive solvents, respectively. The factors affecting the extraction efficiency, such as the type and volume of extraction and dispersive solvent, vortex and ultrasonic time, sample pH, and ionic strength, were optimized. The ultrasound-assisted process was applied to accelerate the formation of the fine cloudy solution by using a small volume of dispersive solvent, which increased the extraction efficiency and reduced the equilibrium time. Under the optimal conditions, the calibration curves showed good linearity in the range of 0.04-20 ng mL -1 (ciprofloxacin and sulfadiazine), 0.2-100 ng mL -1 (ketoprofen, tinidazole, cefuroxime axetil, naproxen, sulfamethoxazole, and sulindac), and 1-200 ng mL -1 (mefenamic acid, tolfenamic acid, piroxicam, and chloramphenicol). The LODs and LOQs of the method were in the range of 0.006-0.091 and 0.018-0.281 ng mL -1 , respectively. The relative recoveries of the target analytes were in the range from 76.77 to 99.97 % with RSDs between 1.6 and 8.8 %. The developed method was successfully applied to the extraction and analysis of 12 pharmaceuticals in five kinds of water samples (drinking water, running water, river water, influent and effluent wastewater) with satisfactory results. Graphical Abstract Twelve pharmaceuticals in water samples analyted by UHPLC-MS/MS using ultrasound-assisted DLLME.

A simple, low cost and ultrasensitive method for the simultaneous preconcentration and determination of trace amount of auramine-O and malachite green in aqueous media following accumulation on novel and lower toxicity nanomaterials by ultrasound-assisted dispersive solid phase micro-extraction (UA-DSPME) procedure combined with spectrophotometric has been described. The Mn doped ZnS nanoparticles loaded on activated carbon were characterized by Field emission scanning electron microscopy (FE-SEM), particle size distribution, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) analyses and subsequently were used as green and efficient material for dyes accumulation. Contribution of experimental variables such as ultrasonic time, ultrasonic temperature, adsorbent mass, vortex time, ionic strength, pH and elution volume were optimized through experimental design, and while the preconcentrated analytes were efficiently eluted by acetone. Preliminary Plackett-Burman design was applied for selection of most significant factors and giving useful information about their main and interaction part of significant variables like ultrasonic time, adsorbent mass, elution volume and pH were obtained by central composite design combined with response surface analysis and optimum experimental conditions was set at pH of 8.0, 1.2mg of adsorbent, 150μL eluent and 3.7min sonication. Under optimized conditions, the average recoveries (five replicates) for two dyes (spiked at 500.0ngmL(-1)) changes in the range of 92.80-97.70% with acceptable RSD% less than 4.0% over a linear range of 3.0-5000.0ngmL(-1) for the AO and MG in water samples with regression coefficients (R(2)) of 0.9975 and 0.9977, respectively. Acceptable limits of detection of 0.91 and 0.61ngmL(-1) for AO and MG, respectively and high accuracy and repeatability are unique advantages of present method to improve the figures of merit for their accurate determination at trace level in complicated materials., (Copyright © 2016 Elsevier B.V. All rights reserved.)

This paper reports ultrasound-assisted optical imaging of chemiluminescent probes in biological tissue. A focused low power ultrasound sonochemically enhances a peroxyoxalate chemiluminescence (CL) that involves indocyanine green (ICG) as luminescent pigments. By scanning the focus, it produces tomographic images of CL in scattering media. The authors demonstrate imaging using a slab of porcine muscle measuring 50 × 50 × 75 mm, in which a capsuled CL reagent is embedded at 25 mm depth. Spatial resolution of imaging and concentration characteristics of CL reagents to enhanced CL intensity are also studied to evaluate the potential for use in bio-imaging applications with exploring the CL enhancement mechanisms. CL enhancement ratio, defined as the ratio of ultrasonically enhanced CL intensity to the base intensity without ultrasound irradiation, was found to be constant even in varying ICG and oxidizer concentrations, implying to be applicable for quantitative determination of these molecules., (Copyright © 2015 Elsevier B.V. All rights reserved.)