Search

Premise: Plants generate a wide array of signals such as olfactory cues to attract and manipulate the response of pollinators. The present study addresses the temporal patterns of scent emission as an additional dimension to the scent composition. The expectation is that divergent floral function is reflected in divergent qualitative and temporal emission patterns., Methods: We used GC-ion mobility spectrometry with an integrated pre-concentration for automated acquisition of the temporal trends in floral volatile emissions for N. viridiflorus, N. papyraceus, and N. cantabricus subsp. foliosus., Results: We found a considerable increase in scent emissions and changes in scent composition for N. viridiflorus at night. This increase was particularly pronounced for aromatic substances such as benzyl acetate and p-cresol. We found no diurnal patterns in N. papyraceus, despite a similar qualitative composition of floral volatiles. Narcissus cantabricus subsp. foliosus showed no diurnal patterns either and differed considerably in floral scent composition., Conclusions: Scent composition, circadian emission patterns, and floral morphology indicate divergent, but partially overlapping pollinator communities. However, the limited pollinator data from the field only permits a tentative correlation between emission patterns and flower visitors. Narcissus papyraceus and N. cantabricus show no clear diurnal patterns and thus no adjustment to the activity patterns of their diurnal pollinators. In N. viridiflorus, timing of scent emission indicates an adaptation to nocturnal flower visitors, contradicting Macroglossum as the only reported pollinator. We propose that the legitimate pollinators of N. viridiflorus are nocturnal and are still unidentified., (© 2024 The Author(s). American Journal of Botany published by Wiley Periodicals LLC on behalf of Botanical Society of America.)

Throughout history, the influenza A virus has caused numerous devastating global pandemics. Macrophages, as pivotal innate immune cells, exhibit a wide range of immune functions characterized by distinct polarization states, reflecting their intricate heterogeneity. In this study, we employed the time-resolved single-cell sequencing technique coupled with metabolic RNA labelling to elucidate the dynamic transcriptional changes in distinct polarized states of bone marrow-derived macrophages (BMDMs) upon infection with the influenza A virus. Our approach not only captures the temporal dimension of transcriptional activity, which is lacking in conventional scRNA-seq methods, but also reveals that M2-polarized Arg1 _macrophage cluster is the sole state supporting successful replication of influenza A virus. Furthermore, we identified distinct antigen presentation capabilities to CD4 + T and CD8 + T cells across diverse polarized states of macrophages. Notably, the M1 phenotype, exhibited by (BMDMs) and murine alveolar macrophages (AMs), demonstrated superior conventional and cross-presentation abilities for exogenous antigens, with a particular emphasis on cross-presentation capacity. Additionally, as CD8 + T cell differentiation progressed, M1 polarization exhibited an enhanced capacity for cross-presentation. All three phenotypes of BMDMs, including M1, demonstrated robust presentation to CD4 + regulatory T cells, while displaying limited ability to present to naive CD4 + T cells. These findings offer novel insights into the immunological regulatory mechanisms governing distinct polarized states of macrophages, particularly their roles in restricting the replication of influenza A virus and modulating antigen-specific T cell responses through innate immunity.

This work proposes MP-Grasp4D (magnetization-prepared golden-angle radial sparse parallel 4D) MRI, a free-breathing, inversion recovery (IR)-prepared, time-resolved 4D MRI technique with improved T1-weighted contrast. MP-Grasp4D MRI acquisition incorporates IR preparation into a radial gradient echo sequence. MP-Grasp4D employs a golden-angle navi-stack-of-stars sampling scheme, where imaging data of rotating radial stacks and navigator stacks (acquired at a consistent rotation angle) are alternately acquired. The navigator stacks are used to estimate a temporal basis for low-rank subspace-constrained reconstruction. This allows for the simultaneous capture of both IR-induced contrast changes and respiratory motion. One temporal frame of the imaging volume in MP-Grasp4D MRI is reconstructed from a single stack and an adjacent navigator stack on average, resulting in a nominal temporal resolution of 0.16 seconds per volume. Images corresponding to the optimal inversion time (TI) can be retrospectively selected for providing the best image contrast. Reader studies were conducted to assess the performance of MP-Grasp4D MRI in liver imaging across 30 subjects in comparison with standard Grasp4D MRI without IR preparation. MP-Grasp4D MRI received significantly higher scores (P < 0.05) than Grasp4D in all assessment categories. There was a moderate to almost perfect agreement (kappa coefficient from 0.42 to 0.9) between the two readers for image quality assessment. When the scan time is reduced, MP-Grasp4D MRI preserves image contrast and quality, demonstrating additional acceleration capability. MP-Grasp4D MRI improves T1-weighted contrast for free-breathing time-resolved 4D MRI and eliminates the need for explicit motion compensation. This method is expected to be valuable in different MRI applications such as MR-guided radiotherapy., (© 2024 John Wiley & Sons Ltd.)

Single-cell transcriptomics reveals significant variations in transcriptional activity across cells. Yet, it remains challenging to identify mechanisms of transcription dynamics from static snapshots. It is thus still unknown what drives global transcription dynamics in single cells. We present a stochastic model of gene expression with cell size- and cell cycle-dependent rates in growing and dividing cells that harnesses temporal dimensions of single-cell RNA sequencing through metabolic labeling protocols and cel lcycle reporters. We develop a parallel and highly scalable approximate Bayesian computation method that corrects for technical variation and accurately quantifies absolute burst frequency, burst size, and degradation rate along the cell cycle at a transcriptome-wide scale. Using Bayesian model selection, we reveal scaling between transcription rates and cell size and unveil waves of gene regulation across the cell cycle-dependent transcriptome. Our study shows that stochastic modeling of dynamical correlations identifies global mechanisms of transcription regulation. A record of this paper's transparent peer review process is included in the supplemental information., Competing Interests: Declaration of interests The authors declare no competing interests., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

Serial crystallography, born from groundbreaking experiments at the Linac Coherent Light Source in 2009, has evolved into a pivotal technique in structural biology. Initially pioneered at X-ray free-electron laser facilities, it has now expanded to synchrotron-radiation facilities globally, with dedicated experimental stations enhancing its accessibility. This review gives an overview of current developments in serial crystallography, emphasizing recent results in time-resolved crystallography, and discussing challenges and shortcomings., (open access.)

The binding of drugs to plasma proteins determines its fate within the physiological system, hence profound understanding of its interaction within the bloodstream is important to understand its pharmacodynamics and pharmacokinetics and thereby its therapeutic potential. In this regard, our work delineates the mechanism of interaction of Selumetinib (SEL), a potent anti-cancer drug showing excellent effect against multiple solid tumors, with plasma protein bovine serum albumin (BSA), using methods such as absorption, steady-state fluorescence, time-resolved, fluorescence resonance energy transfer, Fourier transform infrared spectra (FTIR), circular dichroism (CD), synchronous and 3D-fluorescence, salt fluorescence, molecular docking and molecular dynamic simulations. The BSA fluorescence intensity was quenched with increasing concentration of SEL which indicates interactions of SEL with BSA. Stern-Volmer quenching analysis and lifetime studies indicate the involvement of dynamic quenching. However, some contributions from the static quenching mechanism could not be ruled out unambiguously. The association constant was found to be 5.34 × 10 5  M -1 and it has a single binding site. The Förster distance (r) indicated probable energy transmission between the BSA and SEL. The positive entropy changes and enthalpy change indicate that the main interacting forces are hydrophobic forces, also evidenced by the results of molecular modeling studies. Conformation change in protein framework was revealed from FTIR, synchronous and 3D fluorescence and CD studies. Competitive binding experiments as well as docking studies suggest that SEL attaches itself to site I (subdomain IIA) of BSA where warfarin binds. Molecular dynamic simulations indicate the stability of the SEL-BSA complex. The association energy between BSA and SEL is affected in the presence of different metals differently., (© 2024 John Wiley & Sons Ltd.)

In the domain of organic mixed ionic-electronic conductors (OMIECs), simultaneous transport and coupling of ionic and electronic charges are crucial for the function of electrochemical devices in organic electronics. Understanding conduction mechanisms and chemical reactions in operational devices is pivotal for performance enhancement and is necessary for the informed and systematic development of more promising materials. Surface-enhanced Raman spectroscopy (SERS) is a potent tool for monitoring electrochemical evolution and dynamic doping in operational devices, offering enhanced sensitivity to subtle spectral changes. We demonstrate the utility of SERS for in situ tracking of doping in OMIECs in an organic light-emitting electrochemical cell (LEC) containing a conjugated polymer (poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene]; MEH-PPV), a molecular anion (lithium triflate), and an electrolyte network (poly(ethylene oxide); PEO). SERS enhancement is achieved via an interleaved layer of gold particles formed by spontaneous breakup of a deposited thin gold film. The results successfully highlight the ability of SERS to unveil time-resolved MEH-PPV doping and polaron formation, elucidating the effects of triflate ion transfer in the operating device and validating the electrochemical doping model in LECs.

Gas-phase anions present an ideal playground for the exploration of excited-state dynamics. They offer control in terms of the mass, extent of solvation, internal temperature, and conformation. The application of a range of ion sources has opened the field to a vast array of anionic systems whose dynamics are important in areas ranging from biology to star formation. Here, we review recent experimental developments in the field of anion photodynamics, demonstrating the detailed insight into photodynamical and electron-capture processes that can be uncovered. We consider the electronic and nuclear ultrafast dynamics of electronically bound excited states along entire reaction coordinates; electronically unbound states showing that photochemical concepts, such as chromophores and Kasha's rule, are transferable to electron-driven chemistry; and nonvalence states that straddle the interface between bound and unbound states. Finally, we consider likely developments that are sure to keep the field of anion dynamics buoyant and impactful.

Significance: Hyperspectral time-resolved (TR) near-infrared spectroscopy offers the potential to monitor cytochrome-c-oxidase (oxCCO) and blood oxygenation in the adult brain with minimal scalp/skull contamination. We introduce a hyperspectral TR spectrometer that uses compressive sensing to minimize acquisition time without compromising spectral range or resolution and demonstrate oxCCO and blood oxygenation monitoring in deep tissue., Aim: Develop a hyperspectral TR compressive sensing spectrometer and use it to monitor oxCCO and blood oxygenation in deep tissue., Approach: Homogeneous tissue-mimicking phantom experiments were conducted to confirm the spectrometer's sensitivity to oxCCO and blood oxygenation. Two-layer phantoms were used to evaluate the spectrometer's sensitivity to oxCCO and blood oxygenation in the bottom layer through a 10 mm thick static top layer., Results: The spectrometer was sensitive to oxCCO and blood oxygenation changes in the bottom layer of the two-layer phantoms, as confirmed by concomitant measurements acquired directly from the bottom layer. Measures of oxCCO and blood oxygenation by the spectrometer were highly correlated with "gold standard" measures in the homogeneous and two-layer phantom experiments., Conclusions: The results show that the hyperspectral TR compressive sensing spectrometer is sensitive to changes in oxCCO and blood oxygenation in deep tissue through a thick static top layer., (© 2024 The Authors.)

Developments within the cryo-EM field have allowed us to generate higher-resolution "static" structures and pull out different conformational states which exist at equilibrium within the sample. Moreover, to trap non-equilibrium states and determine conformations that are present after a defined period of time (typically in the ms time frame) new approaches have been developed for the application of time-resolved cryo-EM. Here we give an overview of these different approaches and the limitations and strengths of each whilst identifying some of the current challenges to achieve higher resolutions and trap states within faster time frames. Time-resolved applications may play an important role in the ever-expanding toolkit of cryo-EM and open up new possibilities in both single particle and tomographic studies., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

The L-lactic acid (L-LA) fermentation process, based on sodium hydroxide neutralization, demonstrates environmental friendliness during product extraction. However, lactate fermentation is hindered by the pronounced stress effect of sodium lactate on the strain compared with calcium lactate. In this study, we performed time-resolved transcriptomic and proteomic analyses of Heyndrickxia coagulans DSM1 during NaOH-buffered L-LA production. The expression levels of the glycolytic genes demonstrated an initial increase followed by a subsequent decrease, whereas the tricarboxylic acid cycle genes exhibited an initial decrease followed by a subsequent increase throughout the fermentation process. Moreover, we identified clusters of genes consisting of transcription factors and ATP-binding cassette (ABC) transporters that demonstrate a progressive elevation of expression levels throughout the fermentation process, with significant upregulation observed at later stages. This investigation yields valuable insights into the response mechanisms of H. coagulans during NaOH-buffered L-LA fermentation and presents potential targets for metabolic engineering., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2023 Huang, Tian, Wang and Qin.)

Time-resolved techniques have been widely used in time-gated and luminescence lifetime imaging. However, traditional time-resolved systems require expensive lab equipment such as high-speed excitation sources and detectors or complicated mechanical choppers to achieve high repetition rates. Here, we present a cost-effective and miniaturized smartphone lifetime imaging system integrated with a pulsed ultraviolet (UV) light-emitting diode (LED) for 2D luminescence lifetime imaging using a videoscopy-based virtual chopper (V-chopper) mechanism combined with machine learning. The V-chopper method generates a series of time-delayed images between excitation pulses and smartphone gating so that the luminescence lifetime can be measured at each pixel using a relatively low acquisition frame rate (e.g. 30 frames per second [fps]) without the need for excitation synchronization. Europium (Eu) complex dyes with different luminescent lifetimes ranging from microseconds to seconds were used to demonstrate and evaluate the principle of V-chopper on a 3D-printed smartphone microscopy platform. A convolutional neural network (CNN) model was developed to automatically distinguish the gated images in different decay cycles with an accuracy of >99.5%. The current smartphone V-chopper system can detect lifetime down to ∼75 µs utilizing the default phase shift between the smartphone video rate and excitation pulses and in principle can detect much shorter lifetimes by accurately programming the time delay. This V-chopper methodology has eliminated the need for the expensive and complicated instruments used in traditional time-resolved detection and can greatly expand the applications of time-resolved lifetime technologies., (© The Author(s) 2023. Published by Oxford University Press on behalf of National Academy of Sciences.)

This work demonstrates the utilization of short-time Fourier transform (STFT), and continuous wavelet transform (CWT) electrochemical impedance spectroscopy (EIS) for time-resolved analysis of stochastic collision events of platinum nanoparticles (NPs) onto gold ultramicroelectrode (UME). The enhanced electrocatalytic activity is observed in both chronoamperometry (CA) and EIS. CA provides the impact moment and rough estimation of the size of NPs. The quantitative information such as charge transfer resistance (R ct ) relevant to the exchange current density of a single Pt NP is estimated from EIS. The CWT analysis of the phase angle parameter is better for NP collision detection in terms of time resolution compared to the STFT method., (© 2023 Wiley-VCH GmbH.)

Despite the recent rise of RNA-seq datasets combining single-cell (sc) resolution with 4-thiouridine (4sU) labelling, analytical methods exploiting their power to dissect transcriptional bursting are lacking. Here, we present a mathematical model and Bayesian inference implementation to facilitate genome-wide joint parameter estimation and confidence quantification (R package: burstMCMC). We demonstrate that, unlike conventional scRNA-seq, 4sU scRNA-seq resolves temporal parameters and furthermore boosts inference of dimensionless parameters via a synergy between single-cell resolution and 4sU labelling. We apply our method to published 4sU scRNA-seq data and linked with ChIP-seq data, we uncover previously obscured associations between different parameters and histone modifications., (© 2023. The Author(s).)

High-pressure is a mechanical method to regulate the structure and internal interaction of materials. Therefore, observation of properties' change can be realized in a relatively pure environment. Furthermore, high-pressure affects the delocalization of wavefunction among materials' atoms and thus their dynamics process. Dynamics results are essential data for understanding the physical and chemical characteristics, which is valuable for materials application and development. Ultrafast spectroscopy is a powerful tool to investigate dynamics process and becoming a necessary characterization method for materials investigation. The combination of high-pressure with ultrafast spectroscopy in the nanocosecond∼femtosecond scale enables us to investigate the influence of the enhanced interaction between particles on the physical and chemical properties of materials, such as energy transfer, charge transfer, Auger recombination, etc. Base on this point of view, this review summarizes recent progress in the ultrafast dynamics under high-pressure for various materials, in which new phenomena and new mechanisms are observed. In this review, we describe in detail the principles of in situ high pressure ultrafast dynamics probing technology and its field of application. On this basis, the progress of the study of dynamic processes under high-pressure in different material systems is summarized. An outlook on in situ high-pressure ultrafast dynamics research is also provided., (© 2023 IOP Publishing Ltd.)

Background and Purpose: In comparison with the limited efficacy of conventional MR imaging and the invasiveness of catheter-based digital subtraction angiography (DSA), time-resolved MR angiography (TR-MRA) has been proposed as a promising examination for early diagnosis of spinal arteriovenous shunts (SAVSs). This paper aims to investigate the diagnostic performance of TR-MRA with scan parameters optimized for SAVSs evaluation in a large number of patients., Methods: One hundred patients with suspected SAVSs were enrolled. Each patient underwent preoperative TR-MRA with optimized scan parameters followed by DSA. The presence or absence of SAVS, the types and the angioarchitecture of SAVSs in the TR-MRA images were diagnostically analyzed., Results: Among the final 97 patients, 80 cases (82.5 %) were diagnosed and classified by TR-MRA as spinal cord arteriovenous shunts (SCAVSs; n = 22), spinal dural arteriovenous shunts (SDAVSs; n = 48), and spinal extradural arteriovenous shunts (SEDAVSs; n = 10). The agreement for classifying SAVSs between TR-MRA and DSA was excellent (κ = 0.91). The sensitivity, specificity, PPV, NPV, and accuracy of TR-MRA for the diagnosis of SAVSs were 100 % (95 % CI, 94.3-100.0 %), 76.5 % (95 % CI, 49.8-92.2 %), 95.2 % (95 % CI, 87.6-98.5 %), 100 % (95 % CI, 71.7-100.0 %), and 95.9 % (95 % CI, 89.9-98.4 %). The accuracy rates of TR-MRA for the detection of feeding arteries were 75.9 %, 91.7 %, and 80.0 % for SCAVSs, SDAVSs, and SEDAVSs respectively., Conclusion: Time-resolved MR angiography showed excellent diagnostic performance for SAVSs screening. Additionally, this method can classify SAVSs and identify feeding arteries in SDAVSs with high diagnostic accuracy., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier B.V.)

Introduction: This study evaluated our experience with dynamic computed tomography angiography (dCTA) as a diagnostic tool after endovascular aortic aneurysm repair (EVAR) with respect to the endoleak classification and the available literature., Methods: We reviewed all patients who underwent dCTA because of suspected endoleaks after the EVAR and classified the endoleaks in these patients based on standard CTA (sCTA) and dCTA. We systematically reviewed all available publications that investigated the diagnostic accuracy of dCTA compared with other imaging techniques., Results: In our single-center series, 16 dCTAs were performed in 16 patients. In 11 patients, the undefined endoleaks that appeared on sCTA scans were successfully classified using dCTA. In three patients with a type II endoleak and aneurysm sac growth, inflow arteries were successfully identified using dCTA, and in two patients, aneurysm sac growth was observed without a visible endoleak on both sCTA and dCTA scans. The dCTA revealed four occult endoleaks, all of which were type II endoleaks. The systematic review identified six series comparing dCTA with other imaging methods. All articles reported an excellent outcome regarding the endoleak classification. In published dCTA protocols, the number and timing of phases varied greatly, affecting radiation exposure. Time attenuation curves of the current series show that some phases do not contribute to the endoleak classification and that the use of a test bolus improves the timing of the dCTA., Conclusions: The dCTA is a valuable additional tool that can identify and classify endoleaks more accurately than the sCTA. Published dCTA protocols vary greatly and should be optimized to decrease radiation exposure as long as accuracy can be maintained. The use of a test bolus to improve the timing of the dCTA is recommended, but the optimal number of scanning phases is yet to be determined.

The interaction between macromolecular proteins and small molecule ligands is an essential component of cellular function. Such ligands may include enzyme substrates, molecules involved in cellular signalling or pharmaceutical drugs. Together with biophysical techniques used to assess the thermodynamic and kinetic properties of ligand binding to proteins, methodology to determine high-resolution structures that enable atomic level interactions between protein and ligand(s) to be directly visualised is required. Whilst such structural approaches are well established with high throughput X-ray crystallography routinely used in the pharmaceutical sector, they provide only a static view of the complex. Recent advances in X-ray structural biology methods offer several new possibilities that can examine protein-ligand complexes at ambient temperature rather than under cryogenic conditions, enable transient binding sites and interactions to be characterised using time-resolved approaches and combine spectroscopic measurements from the same crystal that the structures themselves are determined. This Perspective reviews several recent developments in these areas and discusses new possibilities for applications of these advanced methodologies to transform our understanding of protein-ligand interactions., Competing Interests: Author MH was employed by the company Diamond Light Source Ltd. The remaining authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2023 Hough, Prischi and Worrall.)

Electron spectroscopy with the unprecedented transmission of angle-resolved time-of-flight detection, in combination with pulsed X-ray sources, brings new impetus to functional materials science. We showcase recent developments towards chemical sensitivity from electron spectroscopy for chemical analysis and structural information from photoelectron diffraction using the phase transition properties of 1T-TaS 2 . Our development platform is the SurfaceDynamics instrument located at the Femtoslicing facility at BESSY II, where femtosecond and picosecond X-ray pulses can be generated and extracted. The scientific potential is put into perspective to the current rapidly developing pulsed X-ray source capabilities from Lasers and Free-Electron Lasers.

Small-angle X-ray scattering (SAXS) is a method for examining the solution structure, oligomeric state, conformational changes, and flexibility of biomacromolecules at a scale ranging from a few Angstroms to hundreds of nanometers. Wide time scales ranging from real time (milliseconds) to minutes can be also covered by SAXS. With many advantages, SAXS has been extensively used, it is widely used in the structural characterization of biomacromolecules in food science and technology. However, the application of SAXS in charactering the structure of food biomacromolecules has not been reviewed so far. In the current review, the principle, theoretical calculations and modeling programs are summarized, technical advances in the experimental setups and corresponding applications of in situ capabilities: combination of chromatography, time-resolved, temperature, pressure, flow-through are elaborated. Recent applications of SAXS for monitoring structural properties of biomacromolecules in food including protein, carbohydrate and lipid are also highlighted, and limitations and prospects for developing SAXS based on facility upgraded and artificial intelligence to study the structural properties of biomacromolecules are finally discussed. Future research should focus on extending machine time, simplifying SAXS data treatment, optimizing modeling methods in order to achieve an integrated structural biology based on SAXS as a practical tool for investigating the structure-function relationship of biomacromolecules in food industry., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2022 Sun, Li, Chen, Liu and Wei.)

The electrochemistry and photophysics of the Pt(II) complexes [Pt(naphen)(X)] (Hnaphen = naphtho[1,2- b ][1,10]phenanthroline, X = Cl or C≡CPh) containing the rigid tridentate C^N^N -coordinating pericyclic naphen ligand was studied alongside the complexes of the tetrahydro-derivative [Pt(thnaphen)(X)] (Hthnaphen = 5,6,8,9-tetrahydro-naphtho[1,2- b ][1,10]phenanthroline) and the N^C^N -coordinated complex [Pt(bdq)(Cl)] (Hbdq = benzo[1,2- h :5,4- h ']diquinoline. The cyclic voltammetry showed reversible reductions for the C^N^N complexes, with markedly fewer negative potentials (around -1.6 V vs. ferrocene) for the complexes containing the naphen ligand compared with the thnaphen derivatives (around -1.9 V). With irreversible oxidations at around +0.3 V for all of the complexes, the naphen made a difference in the electrochemical gap of about 0.3 eV (1.9 vs. 2.2 eV) compared with thnaphen. The bdq complex was completely different, with an irreversible reduction at around -2 V caused by the N^C^N coordination pattern, which lacked a good electron acceptor such as the phenanthroline unit in the C^N^N ligand naphen. Long-wavelength UV-Vis absorption bands were found around 520 to 530 nm for the C^N^N complexes with the C≡CPh coligand and were red-shifted when compared with the Cl derivatives. The N^C^N -coordinated bdq complex was markedly blue-shifted (493 nm). The steady-state photoluminescence spectra showed poorly structured emission bands peaking at around 630 nm for the two naphen complexes and 570 nm for the thnaphen derivatives. The bdq complex showed a pronounced vibrational structure and an emission maximum at 586 nm. Assuming mixed 3 LC/ 3 MLCT excited states, the vibronic progression for the N^C^N bdq complex indicated a higher LC character than assumed for the C^N^N -coordinated naphen and thnaphen complexes. The blue-shift was a result of the different N^C^N vs. C^N^N coordination. The photoluminescence lifetimes and quantum yields Φ massively increased from solutions at 298 K (0.06 to 0.24) to glassy frozen matrices at 77 K (0.80 to 0.95). The nanosecond time-resolved study on [Pt(naphen)(Cl)] showed a phosphorescence emission signal originating from the mixed L massively increased from solutions at 298 K (0.06 to 0.24) to glassy frozen matrices at 77 K (0.80 to 0.95). The nanosecond time-resolved study on [Pt(naphen)(Cl)] showed a phosphorescence emission signal originating from the mixed 3 LC/ 3 MLCT with an emission lifetime of around 3 µs.

Enzymes, as a kind of biomacromolecules, play an important role in many physiological processes and relate directly to various diseases. Developing an efficient detection method for enzyme activity is important to achieve early diagnosis of enzyme-relevant diseases and high throughput screening of potential enzyme-relevant drugs. Time-resolved luminescence assay provide a high accuracy and signal-to-noise ratios detection methods for enzyme activity, which has been widely used in high throughput screening of enzyme-relevant drugs and diagnosis of enzyme-relevant diseases. Inspired by these advantages, various responsive probes based on metal complexes and metal-free organic compounds have been developed for time-resolved bioimaging and biosensing of enzyme activity owing to their long luminescence lifetimes, high quantum yields and photostability. In this review, we comprehensively reviewed metal complex- and metal-free organic compound-based responsive probes applied to detect enzyme activity through time-resolved imaging, including their design strategies and sensing principles. Current challenges and future prospects in this rapidly growing field are also discussed., (© 2022 Wiley-VCH GmbH.)

Considering the crosstalk between the flow and vessel wall, hemodynamic assessment of the neurovascular system may offer a well-integrated solution for both diagnosis and management by adding prognostic significance to the standard CT/MR angiography. 4D flow MRI or time-resolved 3D velocity-encoded phase-contrast MRI has long been promising for the hemodynamic evaluation of the great vessels, but challenged in clinical studies for assessing intracranial vessels with small diameter due to long scan times and low spatiotemporal resolution. Current accelerated MRI techniques, including parallel imaging with compressed sensing and radial k-space undersampling acquisitions, have decreased scan times dramatically while preserving spatial resolution. 4D flow MRI visualized and measured 3D complex flow of neurovascular diseases such as aneurysm, arteriovenous shunts, and atherosclerotic stenosis using parameters including flow volume, velocity vector, pressure gradients, and wall shear stress. In addition to the noninvasiveness of the phase contrast technique and retrospective flow measurement through the wanted windows of the analysis plane, 4D flow MRI has shown several advantages over Doppler ultrasound or computational fluid dynamics. The evaluation of the flow status and vessel wall can be performed simultaneously in the same imaging modality. This article is an overview of the recent advances in neurovascular 4D flow MRI techniques and their potential clinical applications in neurovascular disease. LEVEL OF EVIDENCE: 5 TECHNICAL EFFICACY STAGE: 3., (© 2020 International Society for Magnetic Resonance in Medicine.)

Dynamical changes in protein structures are essential for protein function and occur over femtoseconds to seconds timescales. X-ray free electron lasers have facilitated investigations of structural dynamics in proteins with unprecedented temporal and spatial resolution. Light-activated proteins are attractive targets for time-resolved structural studies, as the reaction chemistry and associated protein structural changes can be triggered by short laser pulses. Proteins with different light-absorbing centres have evolved to detect light and harness photon energy to bring about downstream chemical and biological output responses. Following light absorption, rapid chemical/small-scale structural changes are typically localised around the chromophore. These localised changes are followed by larger structural changes propagated throughout the photoreceptor/photocatalyst that enables the desired chemical and/or biological output response. Time-resolved serial femtosecond crystallography (SFX) and solution scattering techniques enable direct visualisation of early chemical change in light-activated proteins on timescales previously inaccessible, whereas scattering gives access to slower timescales associated with more global structural change. Here, we review how advances in time-resolved SFX and solution scattering techniques have uncovered mechanisms of photochemistry and its coupling to output responses. We also provide a prospective on how these time-resolved structural approaches might impact on other photoreceptors/photoenzymes that have not yet been studied by these methods., (© 2021 The Authors. The FEBS Journal published by John Wiley & Sons Ltd on behalf of Federation of European Biochemical Societies.)

The concentration ratio of glycosylated hemoglobin A1c (HbA1c) to total hemoglobin (Hb) has long been used to accurately determine stagewise diabetes because this parameter represents a reliable and accurate biomarker of mean 90-day blood glucose values. In this paper, we report a time-resolved chemiluminescence assay that can detect both Hb and HbA1c. For the determination of Hb, the interaction of heme in Hb with H 2 O 2 in NaOH solution was performed to generate a chemiluminescence peak. HbA1c was detected using a sandwich immunoassay based on an acridine ester-labeling method using the same Hb chemiluminescence trigger system. The results showed that the repeatability %CV of the proposed method for multiple detections of HbA1c and Hb ranged from 1.22 to 2.21%, with a median value of 1.73%, while the within-site reproducibility %CV ranged from 2.13 to 3.27%, with a median value of 2.81%. Compared with the conventional HPLC method (BIO-RAD D10 system), the correlation coefficient was 0.9959. In conclusion, a time-resolved multiple chemiluminescence immunoassay biosensor for HbA1c/Hb detection was established, and the method has excellent reproducibility and accuracy, thus demonstrating great potential for clinical application., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

The performance of SwissSPAD2 (SS2), a large scale, widefield time-gated CMOS SPAD imager developed for fluorescence lifetime imaging, has recently been described in the context of visible range and fluorescence lifetime imaging microscopy (FLIM) of dyes with lifetimes in the 2.5 - 4 ns range. Here, we explore its capabilities in the NIR regime relevant for small animal imaging, where its sensitivity is lower and typical NIR fluorescent dye lifetimes are much shorter (1 ns or less). We carry out this study in a simple macroscopic imaging setup based on a compact NIR picosecond pulsed laser, an engineered diffuser-based illumination optics, and NIR optimized imaging lens suitable for well-plate or small animal imaging. Because laser repetition rates can vary between models, but the synchronization signal frequency accepted by SS2 is fixed to 20 MHz, we first checked that a simple frequency-division scheme enables data recording for different laser repetition rates. Next, we acquired data using different time gate widths, including gates with duration longer than the laser period, and analyzed the resulting data using both standard nonlinear least-square fit (NLSF) and phasor analysis. We show that the fixed synchronization rate and large gate widths characterizing SS2 (10 ns and over) are not an obstacle to accurately extracting lifetime in the 1 ns range and to distinguishing between close lifetimes. In summary, SS2 and similar very large gated SPAD imagers appear as a versatile alternative to other widefield time-resolved detectors for NIR fluorescence lifetime imaging, including preclinical molecular applications.

Photosensor proteins are important not only because of their biological functions but also because of their applications in optogenetics. To understand the molecular mechanism behind their biological functions and consequently seek possible applications to optogenetics, the dynamics of their intermolecular interaction (for example, association/dissociation reaction and conformational changes) upon photoexcitation need to be elucidated. Although it has been difficult to trace such reactions in the time domain using traditional spectroscopic techniques, the time-resolved diffusion method based on the transient grating technique has been demonstrated to possess a significant advantage in detecting such spectrally silent dynamics in a time-resolved manner. In this paper, the principle and studies on blue light sensor proteins, phototropins, are described. Reaction kinetics of dimerization, dissociation reactions, and conformational changes were measured, and reaction schemes were determined. This method can be employed to study protein reactions from the viewpoint of diffusion and to elucidate the reaction schemes and kinetics that cannot be detected by other spectroscopic methods., Competing Interests: Conflict of interestThe author declares no competing interests., (© International Union for Pure and Applied Biophysics (IUPAB) and Springer-Verlag GmbH Germany, part of Springer Nature 2021.)

The structure and constitution of opaque materials can be studied with X-ray imaging methods such as 3D tomography. To observe the dynamic evolution of their structure and the distribution of constituents, for example, during processing, heating, mechanical loading, etc., 3D imaging has to be fast enough. In this paper, the recent developments of time-resolved X-ray tomography that have led to what one now calls "tomoscopy" are briefly reviewed A novel setup is presented and applied that pushes temporal resolution down to just 1 ms, that is, 1000 tomograms per second (tps) are acquired, while maintaining spatial resolutions of micrometers and running experiments for minutes without interruption. Applications recorded at different acquisition rates ranging from 50 to 1000 tps are presented. The authors observe and quantify the immiscible hypermonotectic reaction of AlBi10 (in wt%) alloy and dendrite evolution in AlGe10 (in wt%) casting alloy during fast solidification. The combustion process and the evolution of the constituents are analyzed in a burning sparkler. Finally, the authors follow the structure and density of two metal foams over a long period of time and derive details of bubble formation and bubble ageing including quantitative analyses of bubble parameters with millisecond temporal resolution., (© 2021 The Authors. Advanced Materials published by Wiley-VCH GmbH.)

Non-destructive testing of low-density and organic foreign bodies is the main challenge for food safety control. Terahertz time-domain spectroscopy (THz-TDS) and imaging technologies were applied to explore the feasibility of detection for insect foreign bodies in the finishing tea products. THz-TDS of tea leaves and foreign bodies of insects demonstrated significant differences in terms of time domain and frequency signals in the range of 0.3-1.0 THz. These signals were corrected by the use of adaptive iteratively reweighted penalized least squares (AirPLS), asymmetric least squares (AsLS), and baseline estimation and de-noising using sparsity (BEADS) for reducing baseline drift and enhancing effective spectral information. The K-nearest neighbor (KNN) and partial least squares discrimination analysis (PLS-DA) models showed the best performance after AirPLS correction with the prediction accuracy of 98 and 100%, respectively. In addition, the locations and outlines of insect bodies could be clearly presented via the THz-TDS image. These results suggested that THz-TDS spectroscopy and imaging provide an alternative tool for the detection of insect foreign bodies in finishing tea products., Competing Interests: WL is employed by Qingdao Quenda Terahertz Technology Co., Ltd. The remaining authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2021 Sun, Li, Shen and Li.)

Background and Purpose: To determine the feasibility of time-resolved angiography with stochastic trajectories (TWIST) in the diagnosis of spinal dural arteriovenous fistula (SDAVF) and perimedullary arteriovenous fistula (PAVF). Methods: A total of 11 negative patients with TWIST examination were retrospective analyzed and then 18 patients with suspected spinal vascular diseases underwent TWIST. For negative patients, Adamkiewicz artery (AKA), great anterior radiculomedullary vein (GARV) and anterior spinal artery (ASA) were retrospective analyzed. In patients, the results of TWIST were compared with those of DSA. Results: The displaying rates of the ASA, AKA and GARV in 11 negative patients were 100, 90.9, and 90.9%, respectively. The AKA and GARV were separated on TWIST. Of 18 patients, 11 and three were diagnosed with SDAVF and PAVF, respectively. The spinal cord vascular malformation diagnosed on TWIST was consistent with DSA with an excellent intermodality agreement (Kappa = 0.92, p < 0.001). The feeding artery and side of all 11 SDAVF patients were displayed on TWIST and the results were consistent with DSA. For PAVF patients, the feeding artery in two patients and the sides as displayed on TWIST were consistent with DSA. Conclusions: TWIST enables the differentiation of the spinal artery and vein and the differential diagnosis of SDAVF and PAVF., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2021 Wei, Li, Qiao, Yu and Li.)

Time-resolved small- and wide-angle X-ray scattering studies of proteins in solution based on the pump-probe approach unveil structural information from intermediates over a broad range of length and time scales. In spite of the promise of this methodology, only a fraction of the wealth of information encoded in scattering data has been extracted in studies performed thus far. Here, we discuss the methodology, summarize results from recent time-resolved X-ray scattering studies, and examine the potential to extract additional information from these scattering curves., Competing Interests: Conflict of interest statement Nothing declared., (Published by Elsevier Ltd.)

Time-resolved cryo-electron microscopy (TrEM) allows the study of proteins under non-equilibrium conditions on the millisecond timescale, permitting the analysis of large-scale conformational changes or assembly and disassembly processes. However, the technique is developing and there have been few comparisons with other biochemical kinetic studies. Using current methods, the shortest time delay is on the millisecond timescale (∼5-10 ms), given by the delay between sample application and vitrification, and generating longer time points requires additional approaches such as using a longer delay line between the mixing element and nozzle, or an incubation step on the grid. To compare approaches, the reaction of ATP with the skeletal actomyosin S1 complex was followed on grids prepared with a 7-700 ms delay between mixing and vitrification. Classification of the cryo-EM data allows kinetic information to be derived which agrees with previous biochemical measurements, showing fast dissociation, low occupancy during steady-state hydrolysis and rebinding once ATP has been hydrolysed. However, this rebinding effect is much less pronounced when on-grid mixing is used and may be influenced by interactions with the air-water interface. Moreover, in-flow mixing results in a broader distribution of reaction times due to the range of velocities in a laminar flow profile (temporal spread), especially for longer time delays. This work shows the potential of TrEM, but also highlights challenges and opportunities for further development., (open access.)

Background: The human microbiota plays several roles in health and disease but is often difficult to determine which part is in intimate relationships with the host vs. the occasional presence. During the Mars500 mission, six crewmembers lived completely isolated from the outer world for 520 days following standardized diet regimes. The mission constitutes the first spaceflight simulation to Mars and was a unique experiment to determine, in a longitudinal study design, the composition and importance of the resident vs. a more variable microbiota-the fraction of the human microbiota that changes in time and according to environmental conditions-in humans., Methods: Here, we report the characterization of the salivary microbiota from 88 samples taken during and after Mars500 mission for a total of 720 days. Amplicon sequencing of the V3-V4 regions of 16S rRNA gene was performed, and results were analyzed monitoring the diversity of the microbiota while evaluating the effect of the three main variables present in the experimental system: time, diet, and individuality of each subject., Results: Results showed statistically significant effects for either time, diet, and individuality of each subject. The main contribution came from the individuality of each subject, emphasizing salivary microbiota-personalized features, and an individual-based resilience of the microbiota., Conclusions: The uniqueness of Mars500 mission, allowed to dampen the effect of environmental variables on salivary microbiota, highlighting its pronounced personalization even after sharing the same physical space for more than a year. Video abstract.

Luminescence lifetime imaging plays an important role in distinguishing the luminescence decay rates in time-resolved luminescence imaging. However, traditional imaging instruments used for detecting lifetimes within milliseconds would be time-consuming when imaging ultra-long luminescence lifetimes over subseconds. Herein, we present an accessible and simple optical system for detecting lifetimes of persistent luminescence. A smartphone integrated with a UV LED, a dichroic mirror, and a lens was used for recording the persistent luminescence. With only a few seconds of data acquisition, a luminescence lifetime image could be processed from the video by exponential fitting of the gray level of each pixel to the delay time. Since this approach only requires single excitation, no synchronous control is needed, greatly simplifying the apparatus and saving the cost. The apparatus was successfully used for ultra-long luminescence lifetime imaging of mouse tissue dyed with a persistent luminescence molecule. This miniaturized apparatus exhibits huge potentiality in time-resolved luminescence imaging for luminescence study and biological detection.

This commentary explores the use of high-resolution data from new, miniature sensors to enrich models that predict exposures to chemical substances in the workplace. To optimally apply these sensors, one can expect an increased need for new models that will facilitate the interpretation and extrapolation of the acquired time-resolved data. We identified three key modelling approaches in the context of sensor data, namely (i) enrichment of existing time-integrated exposure models, (ii) (new) high-resolution (in time and space) empirical models, and (iii) new 'occupational dispersion' models. Each approach was evaluated in terms of their application in research, practice, and for policy purposes. It is expected that substance-specific sensor data will have the potential to transform workplace modelling by re-calibrating, refining, and validating existing (time-integrated) models. An increased shift towards 'sensor-driven' models is expected. It will allow for high-resolution modelling in time and space to identify peak exposures and will be beneficial for more individualized exposure assessment and real-time risk management. New 'occupational dispersion models' such as interpolation, computational fluid dynamic models, and assimilation techniques, together with sensor data, will be specifically useful. These techniques can be applied to develop site-specific concentration maps which calculate personal exposures and mitigate worker exposure through early warning systems, source finding and improved control design and control strategies. Critical development and investment needs for sensor data linked to (new) model development were identified such as (i) the generation of more sensor data with reliable sensor technologies (achieved by improved specificity, sensitivity, and accuracy of sensors), (ii) investing in statistical and new model developments, (iii) ensuring that we comply with privacy and security issues of concern, and (iv) acceptance by relevant target groups (such as employers and employees) and stimulation of these new technologies by policymakers and technology developers., (© The Author(s) 2020. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.)

COVID-19 exhibits extensive patient-to-patient heterogeneity. To link immune response variation to disease severity and outcome over time, we longitudinally assessed circulating proteins as well as 188 surface protein markers, transcriptome, and T cell receptor sequence simultaneously in single peripheral immune cells from COVID-19 patients. Conditional-independence network analysis revealed primary correlates of disease severity, including gene expression signatures of apoptosis in plasmacytoid dendritic cells and attenuated inflammation but increased fatty acid metabolism in CD56 dim CD16 hi NK cells linked positively to circulating interleukin (IL)-15. CD8 + T cell activation was apparent without signs of exhaustion. Although cellular inflammation was depressed in severe patients early after hospitalization, it became elevated by days 17-23 post symptom onset, suggestive of a late wave of inflammatory responses. Furthermore, circulating protein trajectories at this time were divergent between and predictive of recovery versus fatal outcomes. Our findings stress the importance of timing in the analysis, clinical monitoring, and therapeutic intervention of COVID-19., Competing Interests: Declaration of interests The authors declare no competing interests., (Copyright © 2021. Published by Elsevier Inc.)

The organization of chromatin into higher-order structures and its condensation process represent one of the key challenges in structural biology. This is important for elucidating several disease states. To address this long-standing problem, development of advanced imaging methods has played an essential role in providing understanding into mitotic chromosome structure and compaction. Amongst these are two fast evolving fluorescence imaging technologies, specifically fluorescence lifetime imaging (FLIM) and super-resolution microscopy (SRM). FLIM in particular has been lacking in the application of chromosome research while SRM has been successfully applied although not widely. Both these techniques are capable of providing fluorescence imaging with nanometer information. SRM or "nanoscopy" is capable of generating images of DNA with less than 50 nm resolution while FLIM when coupled with energy transfer may provide less than 20 nm information. Here, we discuss the advantages and limitations of both methods followed by their contribution to mitotic chromosome studies. Furthermore, we highlight the future prospects of how advancements in new technologies can contribute in the field of chromosome science.

A new concept for temporal gating of synchrotron X-ray pulses based on laser-induced thermal transient gratings is presented. First experimental tests of the concept yield a diffraction efficiency of 0.18%; however, the calculations indicate a theoretical efficiency and contrast of >30% and 10 -5 , respectively. The full efficiency of the pulse picker has not been reached yet due to a long-range thermal deformation of the sample after absorption of the excitation laser. This method can be implemented in a broad spectral range (100 eV to 20 keV) and is only minimally invasive to an existing setup., (open access.)

Traditional test paper cannot be reusable and needs much sample solution. In this study, a reusable perovskite nanocomposite fiber paper consisting of CsPbBr 3 quantum dots in-situ growing in the solid polymer fibers with high concentration is fabricated via microwave and electrospinning methods. RhoB is used as the sample solution because it is a hazardous matter but often occurs in printing and dyeing wastewater or appears in food as additives, and traditional detection system generally requires much sample solution (>1 ml) to concentrate for higher concentrations due to the low detection sensitivity. Just need a droplet of sample solution (<25 μl) can this perovskite fiber paper achieve 0.01 ppm of supersensitive detection, which is superior to a majority of reported detection limit. Different from traditional detection based on luminescence intensity, this detection is a new kind of time-resolved method, so that it gets rid of complex and time-consuming calibration (>1 h) usually in traditional detection, and this time-resolved detection can be achieved within ~3 min. Moreover, this perovskite fiber paper is endowed with recyclable property without losing advantages of supersensitive detection (~0.01 ppm), rapid measuring speed (<3 min), and tiny dosage (<25 μl), which is another advantage than conventional detection systems., (Copyright © 2020 Elsevier B.V. All rights reserved.)

This paper presents the results of an investigation into the photooxidation of tocopherols (Tocs) dissolved in argonated and non-argonated n-hexane. During irradiation, steady-state absorption and fluorescence spectra as well as lifetimes were measured. In all experiments, the photoreactions were of the first order type. The reaction rate was higher for all Tocs in argonated solvent. A new emission band with a maximum at 298 nm as well as new absorption and fluorescence bands beyond the 300 nm connected with charge-transfer (C-T) complexes for all Tocs appeared during the irradiation of γ- and δ-Toc. The above results indicate that the photooxidation process is very complex and that the observed phenomena strongly depend on the number and position of methyl groups in the chromanol ring.

Engineering neutron diffraction can nondestructively and noninvasively probe stress, strain, temperature, and phase evolutions deep within bulk materials. In this work, we demonstrate operando lattice strain measurement of internal combustion engine components by neutron diffraction. A modified commercial generator engine was mounted in the VULCAN diffractometer at the Spallation Neutron Source, and the lattice strains in both the cylinder block and head were measured under static nonfiring conditions as well as steady state and cyclic transient operation. The dynamic temporal response of the lattice strain change during transient operation was resolved in two locations by asynchronous stroboscopic neutron diffraction. We demonstrated that operando neutron measurements can allow for understanding of how materials behave throughout operational engineering devices. This study opens a pathway for the industrial and academic communities to better understand the complexities of material behavior during the operation of internal combustion engines and other real-scale devices and systems and to leverage techniques developed here for future investigations of numerous new platforms and alloys., Competing Interests: The authors declare no competing interest., (Copyright © 2020 the Author(s). Published by PNAS.)

Background: As two important tumor markers, vascular endothelial growth factor (VEGF) and carcinoembryonic antigen (CEA) have a great value for clinical application in the early diagnosis of cancer. Due to the complex composition of biological samples, the results from combined detection of CEA and VEGF are often taken as a comprehensive indicator in order to make an accurate judgment on a disease. However, most of the current methods can only be used to detect the content of one biomarker. Therefore, it is necessary to explore a simple, rapid, low-cost, and highly sensitive method for the simultaneous detection of CEA and VEGF., Methods: Based on specific aptamers and magnetic separation, a time-resolved chemiluminescence enzyme-linked aptamer assay was developed for the simultaneous detections of CEA and VEGF in serum samples., Results: Under the optimal conditions, the linear range of the calibration curve for VEGF was from 0.5 to 80 ng mL -1 , and the limit of detection was 0.1 ng mL -1 . The linear range of the calibration curve for CEA was 0.5 to 160 ng mL -1 , and the limit of detection was 0.1 ng mL -1 . The established method was applied to detect VEGF and CEA in serum samples. The results were consistent with those of commercial kits., Conclusion: The method has high sensitivity and can quickly obtain accurate results, which could greatly improve the measurement efficiency, reduce the cost, and also reduce the volume of sample consumed. It can be seen that the method established in this study has important application value and broad application prospect in clinical diagnosis., Competing Interests: The authors report no conflicts of interest in this work., (© 2020 Man et al.)

Proteins are dynamic molecules that can undergo rapid conformational rearrangements in response to stimuli. These structural changes are often critical to protein function, and thus elucidating time-dependent conformational landscapes has been a long-standing goal of structural biology. To harness the power of single particle cryo-EM methods to enable 'time-resolved' structure determination, we have developed a light-coupled cryo-plunger that pairs flash-photolysis of caged ligands with rapid sample vitrification. The 'flash-plunger' consists of a high-power ultraviolet LED coupled with focusing optics and a motorized linear actuator, enabling the user to immobilize protein targets in vitreous ice within a programmable time window - as short as tens of milliseconds - after stimulus delivery. The flash-plunger is a simple, inexpensive and flexible tool to explore short-lived conformational states previously unobtainable by conventional sample preparation methods., (Copyright © 2020 Elsevier Inc. All rights reserved.)

Supported lipid multi-bilayers or bilayer stacks are an important model membrane system, particularly suitable for surface-sensitive characterization methods like X-ray and neutron diffraction. Spreading organic solution (sOS) is one of the most widely used protocols for the preparation of lipid multi-bilayers. Despite its great popularity, the self-assembly mechanism of the bilayers is not yet fully elucidated, limiting further improvements of this protocol. In order to solve this problem, we investigated the formation process of lipid bilayers in the sOS protocol, using in-situ time-resolved X-ray diffraction, complemented by X-ray reflectivity and molecular dynamics simulation. Results reveal a simultaneous self-assembly scheme for both cholesterol-free and cholesterol-containing bilayers, with one bilayer phase forming at the surface and the other forming in the solution. The solution phase gradually transforms into the surface phase, yielding clean single phase in the end., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020. Published by Elsevier B.V.)

Background: There is an emerging body of evidence that supports the potential clinical value of left ventricular (LV) intracavity blood flow kinetic energy (KE) assessment using four-dimensional flow cardiovascular magnetic resonance imaging (4D flow CMR). The aim of this systematic review is to summarize studies evaluating LV intracavity blood flow KE quantification methods and its potential clinical significance. Methods: A systematic review search was carried out on Medline, Pubmed, EMBASE and CINAHL. Results: Of the 677 articles screened, 16 studies met eligibility. These included six (37%) studies on LV diastolic function, another six (37%) studies on heart failure or cardiomyopathies, three (19%) studies on ischemic heart disease or myocardial infarction and finally, one (6%) study on valvular heart disease, namely, mitral regurgitation. One of the main strengths identified by these studies is high reproducibility of LV blood flow KE hemodynamic assessment (mean coefficient of variability = 6 ±  2%) for the evaluation of LV diastolic function. Conclusions: The evidence gathered in this systematic review suggests that LV blood flow KE has great promise for LV hemodynamic assessment. Studies showed increased diagnostic confidence at no cost of additional time. Results were highly reproducible with low intraobserver variability.

The genetic material of viruses is protected by protein shells that are assembled from a large number of subunits in a process that is efficient and robust. Many of the mechanistic details underpinning efficient assembly of virus capsids are still unknown. The assembly mechanism of hepatitis B capsids has been intensively researched using a truncated core protein lacking the C-terminal domain responsible for binding genomic RNA. To resolve the assembly intermediates of hepatitis B virus (HBV), we studied the formation of nucleocapsids and empty capsids from full-length hepatitis B core proteins, using time-resolved small-angle X-ray scattering. We developed a detailed structural model of the HBV capsid assembly process using a combination of analysis with multivariate curve resolution, structural modeling, and Bayesian ensemble inference. The detailed structural analysis supports an assembly pathway that proceeds through the formation of two highly populated intermediates, a trimer of dimers and a partially closed shell consisting of around 40 dimers. These intermediates are on-path, transient and efficiently convert into fully formed capsids. In the presence of an RNA oligo that binds specifically to the C-terminal domain the assembly proceeds via a similar mechanism to that in the absence of nucleic acids. Comparisons between truncated and full-length HBV capsid proteins reveal that the unstructured C-terminal domain has a significant impact on the assembly process and is required to obtain a more complete mechanistic understanding of HBV capsid formation. These results also illustrate how combining scattering information from different time-points during time-resolved experiments can be utilized to derive a structural model of protein self-assembly pathways.

The nonlinear optical response of a material is a sensitive probe of electronic and structural dynamics under strong light fields. The induced microscopic polarizations are usually detected via their far-field light emission, thus limiting spatial resolution. Several powerful near-field techniques circumvent this limitation by employing local nanoscale scatterers; however, their signal strength scales unfavorably as the probe volume decreases. Here, we demonstrate that time-resolved atomic force microscopy is capable of temporally and spatially resolving the microscopic, electrostatic forces arising from a nonlinear optical polarization in an insulating dielectric driven by femtosecond optical fields. The measured forces can be qualitatively explained by a second-order nonlinear interaction in the sample. The force resulting from this nonlinear interaction has frequency components below the mechanical resonance frequency of the cantilever and is thus detectable by regular atomic force microscopy methods. The capability to measure a nonlinear polarization through its electrostatic force is a powerful means to revisit nonlinear optical effects at the nanoscale, without the need for emitted photons or electrons from the surface., Competing Interests: The authors declare no competing interest., (Copyright © 2020 the Author(s). Published by PNAS.)

Time-resolved luminescence measurement is a useful technique which can eliminate the background signals from scattering and short-lived autofluorescence. However, the relative instruments always require pulsed excitation sources and high-speed detectors. Moreover, the excitation and detecting shutter should be precisely synchronized by electronic phase matching circuitry, leading to expensiveness and high-complexity. To make time-resolved luminescence instruments simple and cheap, the automatic synchronization method was developed by using a mechanical chopper acted as both of the pulse generator and detection shutter. Therefore, the excitation and detection can be synchronized and locked automatically as the optical paths fixed. In this paper, we first introduced the time-resolved luminescence measurements and review the progress and current state of this field. Then, we discussed low-cost time-resolved techniques, especially chopper-based time-resolved luminescence detections. After that, we focused on auto-phase-locked method and some of its meaningful applications, such as time-gated luminescence imaging, spectrometer, and luminescence lifetime detection. Finally, we concluded with a brief outlook for auto-phase-locked time-resolved luminescence detection systems., (Copyright © 2020 Deng, Zhu and Shu.)