Search

The research was carried out to optimize the cooking process based on the quality parameters of rice. The steaming process with high pressure proved to have more acceptance among consumers. Based on the textural and gel properties of steamed rice, rice samples soaked for 15 min with a 1:1.3 ratio and steamed at 110 °C and 0.042 MPa were found to be a more effective treatment. Stress-relaxation study and pasting curve model were conducted to comprehensively explain the combinational effect of independent variables. Principal component analysis was carried out to investigate the association between textural and gel characteristics of cooked rice treatments. Characterization was done to check the impact of high-pressure steam on rice. Starch, protein, and amylose content of rice sample were recorded as 78.6, 6.6, and 18.7 % accordingly. High-pressure steam increases the solubility and swelling power while reducing the gelatinization temperature and causing a yellowish color. Pseudoplastic fluid behavior was recorded for both treatments while crystalline structure converted into V-type from A-type in the optimized sample. Optimized samples had lower values of To, Tp, and Tc while higher values of enthalpy and A 21 , A 22 , and A 23 representing better moisture distribution by breakdown of microstructure obstacles resulting in soft and thick cooked rice., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2025 The Authors.)

Quantitative structure permeation relationship (QSPR) models have gained prominence in recent years owing to their capacity to elucidate the influence of physicochemical properties on the dermal absorption of chemicals. These models facilitate the prediction of permeation coefficient (Kp) values, indicating the skin permeability of a chemical under infinite dose conditions. Conversely, obtaining dermal absorption rates (DAs) under finite dose conditions, which are crucial for skin product safety evaluation, remains a challenge when relying solely on Kp predictions from QSPR models. One proposed resolution involves using Kroes' methodology, categorizing DAs based on Kp values; however, refinement becomes necessary owing to discreteness in the obtained values. We previously developed a mathematical model using Kp values obtained from in vitro dermal absorption tests to predict DAs. The present study introduces a new methodology, Integrating Mathematical Approaches (IMAS), which combines QSPR models and our mathematical model to predict DAs for risk assessments without conducting in vitro dermal absorption tests. Regarding 40 chemicals (76.1 ≤ MW ≤ 220; -1.4 ≤ Log K o/w ≤ 3.1), IMAS showed that 65.0% (26/40) predictions of DA values were accurate to within twofold of the observed values in finite dose experiments. Compared to Kroes' methodology, IMAS notably mitigated overestimation, particularly for hydrophilic chemicals with water solubility exceeding 57.0 mg/cm 3 . These findings highlight the value of IMAS as a tool for skin product risk assessments, particularly for hydrophilic compounds.

Background: To investigate whether ultrasound-based optic nerve sheath diameter (US-ONSD) is a reliable measure to follow up children with idiopathic intracranial hypertension (IIH). In addition, to analyze the inter- and intra-individual relationships between US-ONSD and intracranial pressure (ICP), and to investigate whether an individualized mathematical regression equation obtained from two paired US-ONSD/ICP values can be used to approximate ICP from US-ONSD values., Methods: 159 US examinations and 53 invasive ICP measures via lumbar puncture (LP) were performed in 28 children with IIH. US-ONSD was measured using a 12 Mhz linear transducer and compared to ICP values. In 15 children, a minimum of 2 paired US-ONSD/ICP determinations were performed, and repeated-measures correlation (rmcorr) and intra-individual correlations were analyzed., Results: The cohort correlation between US-ONSD and ICP was moderate (r = 0.504, p < 0.01). Rmcorr (r = 0.91, p < 0.01) and intra-individual correlations (r = 0.956-1) of US-ONSD and ICP were excellent. A mathematical regression equation can be calculated from two paired US-ONSD/ICP values and applied to the individual patient to approximate ICP from US-ONSD., Conclusions: Related to excellent intra-individual correlations between US-ONSD and ICP, an individualized regression formula, created from two pairs of US-ONSD/ICP values, may be used to directly approximate ICP based on US-ONSD values. Hence, US-ONSD may become a non-invasive and reliable measure to control treatment efficacy in pediatric IIH.

The high-yield optical wireless network (OWN) is a promising framework to strengthen 5G and 6G mobility. In addition, high direction and narrow bandwidth-based laser beams are enormously noteworthy for high data transmission over standard optical fibers. Therefore, in this paper, the performance of a vertical cavity surface emitting laser (VCSEL) is evaluated using the machine learning (ML) technique, aiming to purify the optical beam and enable OWN to support high-speed, multi-user data transmission. The ML technique is applied on a designed VCSEL array to optimize paths for DC injection, AC signal modulation, and multiple-user transmission. The mathematical model of VCSEL narrow beam, OWN, and energy loss through nonlinear interference in an optical wireless network is studied. In addition, the mathematical model is then affirmed with a simulation model following the bit error rate (BER), the laser power, the current, and the fiber-length performance matrices. The results estimations declare that the presented methodology offers a narrow beam of VCSEL, mitigating nonlinear interference in OWN and increasing energy efficiency.

Objective: To provide reliable prediction models based on dentoskeletal and soft tissue variables for customizing maxillary incisor positions and to optimize digitalized orthodontic treatment planning., Methods: This study included 244 Chinese women (age, 18-40 years old) with esthetic profiles after orthodontic treatment with fixed appliances (133 in group I: 1° ≤ The angle between the nasion [N]-A point [A] plane and the N-B point [B] plane [ANB] ≤ 4°; 111 in group II: 4° < ANB ≤ 7°). Dental, skeletal, and soft tissue measurements were performed on lateral cephalograms of the participants. Correlation and multiple linear regression analyses were used to determine the influence of dentoskeletal and soft tissue variables on maxillary incisor position., Results: The ideal anteroposterior position of the maxillary incisor varied between sagittal skeletal patterns. The position of the maxillary incisor correlated with the sagittal discrepancy between the maxilla and the mandible (ANB), protrusion of the midface, nasal tip projection, development of the chin, and inclination of both the maxillary and mandibular incisors. Distance from the maxillary central incisor to nasion-pogonion plane predicted using multiple linear regression analysis was accurate and could be a practical measurement in orthodontic treatment planning., Conclusions: Instead of using an average value or norm, orthodontists should customize a patient's ideal maxillary incisor position using dentoskeletal and soft tissue evaluations.

Background: To maintain control of the coronavirus disease 2019 (COVID-19) epidemic as lockdowns are lifted, it will be crucial to enhance alternative public health measures. For surveillance, it will be necessary to detect a high proportion of any new cases quickly so that they can be isolated, and people who have been exposed to them traced and quarantined. Here we introduce a mathematical approach that can be used to determine how many samples need to be collected per unit area and unit time to detect new clusters of COVID-19 cases at a stage early enough to control an outbreak., Methods: We present a sample size determination method that uses a relative weighted approach. Given the contribution of COVID-19 test results from sub-populations to detect the disease at a threshold prevalence level to control the outbreak to 1) determine if the expected number of weekly samples provided from current healthcare-based surveillance for respiratory virus infections may provide a sample size that is already adequate to detect new clusters of COVID-19 and, if not, 2) to determine how many additional weekly samples were needed from volunteer sampling., Results: In a demonstration of our method at the weekly and Canadian provincial and territorial (P/T) levels, we found that only the more populous P/T have sufficient testing numbers from healthcare visits for respiratory illness to detect COVID-19 at our target prevalence level-assumed to be high enough to identify and control new clusters. Furthermore, detection of COVID-19 is most efficient (fewer samples required) when surveillance focuses on healthcare symptomatic testing demand. In the volunteer populations: the higher the contact rates; the higher the expected prevalence level; and the fewer the samples were needed to detect COVID-19 at a predetermined threshold level., Conclusion: This study introduces a targeted surveillance strategy, combining both passive and active surveillance samples, to determine how many samples to collect per unit area and unit time to detect new clusters of COVID-19 cases. The goal of this strategy is to allow for early enough detection to control an outbreak., Competing Interests: Competing interest: None.

The appendix has been hypothesized to protect the colon against Clostridium difficile infection (CDI) by providing a continuous source of commensal bacteria that crowd out the potentially unhealthy bacteria and/or by contributing to defensive immune dynamics. Here, a series of deterministic systems comprised of ordinary differential equations, which treat the system as an ecological community of microorganisms, model the dynamics of colon microbiome. The first model includes migration of commensal bacteria from the appendix to the gut, while the second model expands this to also include immune dynamics. Simulations and simple analytic techniques are used to explore dynamics under biologically relevant parameters values. Both models exhibited bistability with steady states of a healthy state and of fulminant CDI. However, we find that the appendix size was much too small for migration to affect the stability of the system. Both models affirm the use of fecal transplants in conjunction with antibiotic use for CDI treatment, while the second model also suggests that anti-inflammatory drugs may protect against CDI. Ultimately, in general neither the appendiceal migration rate of commensal microbiota nor the boost to antibody production could exert an appreciable impact on the stability of the system, thus failing to support the proposed protective role of the appendix against CDI., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

It is generally accepted that tumour cells can be eliminated by M1 anti-tumour macrophages and CD8 + T cells. However, experimental results over the past 10-15 years have shown that B16 mouse melanoma cells can be eliminated by the CD4 + T cells alone (either Th1 or Th2 sub-types), in the absence of CD8 + T cells. In some studies, elimination of B16 melanoma was associated with a Th1 immune response (i.e., elimination occurred in the presence of cytokines produced by Th1 cells), while in other studies melanoma elimination was associated with a Th2 immune response (i.e., elimination occurred in the presence of cytokines produced by Th2 cells). Moreover, macrophages have been shown to be present inside the tumours, during both Th1 and Th2 immune responses. To investigate the possible biological mechanisms behind these apparently contradictory results, we develop a class of mathematical models for the dynamics of Th1 and Th2 cells, and M1 and M2 macrophages in the presence/absence of tumour cells. Using this mathematical model, we show that depending on the re-polarisation rates between M1 and M2 macrophages, we obtain tumour elimination in the presence of a type-I immune response (i.e., more Th1 and M1 cells, compared to the Th2 and M2 cells), or in the presence of a type-II immune response (i.e., more Th2 and M2 cells). Moreover, tumour elimination is also possible in the presence of a mixed type-I/type-II immune response. Tumour growth always occurs in the presence of a type-II immune response, as observed experimentally. Finally, tumour dormancy is the result of a delicate balance between the pro-tumour effects of M2 cells and the anti-tumour effects of M1 and Th1 cells., (Copyright © 2017 Elsevier Ltd. All rights reserved.)