Search

Hypercholesterolemia is a major risk factor for atherosclerotic cardiovascular disease leading to reduced (healthy) life years. The aim of this study is to quantify the societal costs associated with hypercholesterolemia. We use epidemiologic data on the distribution of cholesterol levels as well as data on relative risks regarding ischemic heart disease, stroke, and other cardiovascular diseases. The analytical approach is based on the use of population-attributable fractions applied to direct medical, direct non-medical and indirect costs using data of Austria. Within a life-cycle analysis we sum up the costs of hypercholesterolemia for the population of 2019 and, thus, consider future morbidity and mortality effects on this population. Epidemiologic data suggest that approximately half of Austria's population have low-density lipoprotein cholesterol (LDL-C) levels above the target levels (i.e., are exposed to increased risk). We estimate that 8.2% of deaths are attributable to hypercholesterolemia. Total costs amount to about 0.33% of GDP in the single-period view. In the life-cycle perspective, total costs amount to €806.06 million, €312.1 million of which are medical costs, and about €494 million arise due to production loss associated with hypercholesterolemia. The study points out that significant shares of deaths, entries into disability pension and care allowance, full-time equivalents lost to the labor market as well as monetary costs for the health system and the society could be avoided if LDL-C-levels of the population were reduced., (© 2024. The Author(s).)

Pharmaceuticals produce considerable environmental harm. The industry's resource-intensive nature, coupled with high energy costs for manufacturing and transportation, contribute to the "upstream" harms from greenhouse gas emissions and ecosystem pollution, while factors such as overprescription, overuse, and pharmaceutical waste contribute to the "downstream" harms. Effectively addressing pharmaceutical pollution requires an understanding of the key roles and responsibilities along the product lifecycle. In this commentary, we argue that three actors-producers, regulators, and prescribers-have unique and interdependent responsibilities to address these issues. Producers and market access regulators are upstream actors who can manage and mitigate harms by both shifting manufacturing, business practices, and regulatory requirements and producing transparent, robust data on environmental harms. By contrast, prescribers are downstream actors whose capacity to reduce environmental harms arises principally as a "co-benefit" of reducing inappropriate prescribing and overuse. Potentially complicating the prescriber's role are the calls for prescribers to recommend "environmentally preferable medicines". These calls continue to increase, even with the sparsity of transparent and robust data on the impact of pharmaceuticals on the environment. Recognizing the interdependencies among actors, we argue that, rather than being ineffectual, these calls draw needed attention to the critical responsibility for upstream actors to prioritize data production, reporting standards and public transparency to facilitate future downstream efforts to tackle pharmaceutical pollution.

The mechanisms of cadmium (Cd) uptake and redistribution throughout the peanut lifecycle remain unclear. This study employed multi-isotope labeling techniques in hydroponic and soil-foliar systems, revealing that Cd uptake during podding (Cd p ) constituted 73.7% of kernel Cd content, whereas contributions from the flowering (Cd f ) and seedling (Cd s ) stages were 22.2 and 4.1%, respectively. Stem-stored Cd (Cd stem ) contributes 53.2% to kernel Cd accumulation, while leaf-stored Cd (Cd leaf ) contributes 46.8%. Prestored Cd f in shoots demonstrated the most efficient transport to pods, approximately twice that of Cd s and Cd p . Cd s and Cd f were predominantly stored in leaves (51.0%), while Cd p mainly in stems (46.3%), 2.8 times its presence in leaves (16.5%), indicating distinct root-stem-kernel translocation. In the transfer of shoot Cd from stems to pods, 29.3% of Cd leaf and 25.0% of Cd stem were exported. This study provides novel insights into Cd dynamics in peanuts, establishing a foundation for future Cd regulation strategies.

This paper presents a comprehensive overview of the environmental impact of surgical procedures and highlights potential strategies to reduce the associated greenhouse gas emissions. We discuss procurement, waste management, and energy consumption, providing examples of successful interventions in each area. We also emphasize the importance of adopting the Green Theatre Checklist as a useful tool for clinicians aiming to implement sustainable surgical practices., Competing Interests: Declaration of competing interest All listed authors have declared no conflicts of interest., (Copyright © 2023 Royal College of Surgeons of Edinburgh (Scottish charity number SC005317) and Royal College of Surgeons in Ireland. Published by Elsevier Ltd. All rights reserved.)

Anastatus orientalis Yang & Choi (Hymenoptera: Eupelmidae), an egg parasitoid of spotted lanternfly, Lycorma delicatula (White) (Hemiptera: Fulgoridae), has been documented emerging from host eggs in both autumn and spring, at the beginning and end of the period that spotted lanternfly eggs are present in the field, suggesting parasitoid-host specificity and synchrony. This study was designed to test whether, under conditions that simulate native and introduced ranges of spotted lanternfly, (a) A. orientalis has 2 and only 2 generations per year, (b) A. orientalis adults sometimes emerge when only nontarget species would be available for parasitization, and (c) emerging parasitoid adults can parasitize unhatched host eggs in the spring. Parasitized spotted lanternfly eggs were collected in 2019 and 2020 from Beijing, China and in 2020 and 2021 from Yantai, China. They were shipped for laboratory study in growth chambers programmed to simulate temperature and daylength for collection locations in China and in the invaded range in Pennsylvania, United States. Anastatus orientalis had a flexible lifecycle depending on environmental conditions and possibly genetic makeup, with 1-3 generations per year, and parasitoid emergence was not always synchronous with host egg availability. Additionally, given the cooler temperatures in Pennsylvania, autumn parasitoid emergence was often delayed until late October or November, no progeny were produced, and parasitoid populations died out. Anastatus orientalis does not exhibit host synchrony characteristics that would make it a good candidate for a classical biological control program., (Published by Oxford University Press on behalf of Entomological Society of America 2024.)

Medical waste management is an essential component of healthcare delivery globally due to the toxic and contagious potentials on human health and the environment. There are resource limitations in developing nations when it comes to the appropriate handling of medical wastes. In this article, we examined previous studies to evaluate the practices of medical waste management in China and Nigeria. Contextually, this work addresses medical waste practices in the context of waste generation, segregation, collection, storage, transportation, treatment and disposal. In addition to reviewing additional important aspects of medical waste management, the current study addresses potentials and challenges for efficient medical waste management in both countries. For this study; Scopus, Web of Science, Google Scholar, PubMed, Agencies, Conferences, National and International Conventions were searched from 1998 up to 2023 for all studies reporting medical waste management in China and Nigeria. To further guarantee that only resource materials with similar research interests in medical waste management were selected, a double screening process was employed. The challenges of medical waste management in both countries are limited financing, inadequate training, ineffective legislation, ineffective medical waste transport system and insufficient treatment technology. Furthermore, this study offers practical recommendations by identifying the particular areas that require attention and development, such as training of healthcare workers, adequate financing of medical waste management projects, including research and development on efficient toxic emission reducing technologies, and partnership with other relevant authorities and stakeholders to ensure enforcement of national and local legislation., Competing Interests: Declaration of conflicting interestsThe authors declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

Porphyromonas gingivalis is a gram-negative anaerobic bacterium recognized for its pivotal role in the pathogenesis of periodontal diseases. This review covers an overview of the virulence factors and lifecycle stages of P. gingivalis, with a specific focus on attachment and colonization, biofilm formation, growth and multiplication, dormancy survival and dissemination. Additionally, we explore the significance of inter-bacterial cross-feeding within biofilms. Furthermore, we discuss potential phytochemical-based strategies to target P. gingivalis, including the use of curcumin, apigenin, quercetin and resveratrol. Understanding the virulence factors and lifecycle stages of P. gingivalis, along with the promising phytochemical-based interventions, holds promise for advancing strategies in periodontal disease management and oral health promotion., (© 2024 Scandinavian Societies for Pathology, Medical Microbiology and Immunology.)

Bioplastics have been used as alternatives to conventional petroleum-based plastics to lessen the burdens on marine and terrestrial environments due to their non-biodegradability and toxicity. However, recent studies have shown that not all bioplastics may be environmentally friendly. Microalgae, such as Spirulina that do not require arable land, have been identified as a potential bioplastic source. In this study, cradle-to-gate life cycle assessment (LCA) was carried out in openLCA program using the Agribalyse database, to evaluate the environmental impacts of Spirulina bioplastic, formed from plasticization of Spirulina powder with glycerol. Two processes were created for the inventories of (i) Spirulina powder and (ii) Spirulina bioplastic, where the output of the former served as an input for the latter. The extruded bioplastic sheets were food-grade and could be used as edible packaging materials. The bioplastic was also compared to conventional plastics and it was found that the energy consumption was 3.83 ± 0.26 MJ/kg-bioplastic, which was 12% and 22% higher than that of LDPE and PVC plastic films, respectively. The impacts on the environment showed that the chemical growth medium (Zarrouk medium) and electricity were the main contributors in most of the categories. Compared to the PVC and LDPE films, the Spirulina bioplastic's impacts on the aquatic ecosystems were 2-3 times higher. The global warming potential of the Spirulina bioplastic was 1.99 ± 0.014 kg CO 2 eq, which was 23% and 47% lower than that of LDPE and PVC films, respectively. Sensitivity analysis was carried out by changing the electricity source and using alternative growth media. Except for the case of switching to solar energy, the results for other cases did not differ significantly from the base case scenario. Future studies were suggested to identify different greener alternatives to the growth medium as well as different energy mixes for more environmentally benign solutions., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests:Pongtorn Charoensuppanimit reports financial support was provided by NSRF via the Program Management Unit from Human Resources & Institutional Development, Research and Innovation, Thailand. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

We approach the questions, what part of evolutionary change results from selection, and what is the adaptive information flow into a population undergoing selection, as a problem of quantifying the divergence of typical trajectories realized under selection from the expected dynamics of their counterparts under a null stochastic-process model representing the absence of selection. This approach starts with a formulation of adaptation in terms of information and from that identifies selection from the genetic parameters that generate information flow; it is the reverse of a historical approach that defines selection in terms of fitness, and then identifies adaptive characters as those amplified in relative frequency by fitness. Adaptive information is a relative entropy on distributions of histories computed directly from the generators of stochastic evolutionary population processes, which in large population limits can be approximated by its leading exponential dependence as a large-deviation function. We study a particular class of generators that represent the genetic dependence of explicit transitions around reproductive cycles in terms of stoichiometry, familiar from chemical reaction networks. Following Smith (2023), which showed that partitioning evolutionary events among genetically distinct realizations of lifecycles yields a more consistent causal analysis through the Price equation than the construction from units of selection and fitness, here we show that it likewise yields more complete evolutionary information measures., (Copyright © 2024 The Author(s). Published by Elsevier Inc. All rights reserved.)

Tropical infectious diseases inflict an unacceptable burden of disease on humans living in developing countries. Although anti-pathogenic drugs have been widely used, they carry a constant threat of selecting for resistance. Vaccines offer a promising means by which to enhance the global control of tropical infectious diseases; however, these have been difficult to develop, mostly because of the complex nature of the pathogen lifecycles. Here, we present recently developed vaccine candidates for five tropical infectious diseases in the form of a catalog that have either entered clinical trials or have been licensed for use. We deliberate on recently licensed dengue vaccines, provide evidence why combination vaccination could have a synergistic impact on schistosomiasis, critically appraise the value of typhoid conjugate vaccines, and discuss the potential of vaccines in the efforts to eliminate vivax malaria and hookworms., Competing Interests: Declarations of competing interest The authors have no competing interests to declare., (Copyright © 2024. Published by Elsevier Ltd.)

Operationalization guidance is needed to support health technology assessment (HTA) bodies considering implementing lifecycle HTA (LC-HTA) approaches. The 2022 Health Technology Assessment International (HTAi) Global Policy Forum (GPF) established a Task Force to develop a position paper on LC-HTA. In its first paper, the Task Force established a definition and framework for LC-HTA in order to tailor it to specific decision problems. This second paper focused on the provision of practical operational guidance to implement LC-HTA. Detailed descriptions of the three LC-HTA operational steps are provided (defining the decision problem, sequencing of HTA activities, and developing optimization criteria) and accompanied by worked examples and an operationalization checklist with 20 different questions for HTA bodies to consider when developing an LC-HTA approach. The questions were designed to be applicable across different types of HTA and scenarios, and require adaptation to local jurisdictions, remits, and context.

Significant events impacting healthcare over the last several years have been associated with escalating rates of healthcare-associated infections. This has resulted in increased efforts to reinstitute well-established and evidence-based infection prevention practices, particularly for central line associated bloodstream infections. However, implementation of prevention initiatives beyond central lines has not received the same level of acknowledgement and response as being a considerable risk to patients. This article, authored by infection prevention, infectious disease, and vascular access professionals, provides emerging perspectives and technical aspects associated with the complete lifecycle of a vascular access device. The intent is to provide insight and perspective into enhancing current IP practices in the acute care hospital setting. This will also help prepare hospitals for upcoming broader surveillance and intervention activities aimed at reducing Hospital Onset Bacteremia and Fungemia (HOB) associated with all types of vascular access devices., (© The Author(s) 2024. Published by Oxford University Press on behalf of Infectious Diseases Society of America. All rights reserved. For commercial re-use, please contact reprints@oup.com for reprints and translation rights for reprints. All other permissions can be obtained through our RightsLink service via the Permissions link on the article page on our site—for further information please contact journals.permissions@oup.com.)

Background: Technological advancements, improved surgical access, and heightened demand for surgery have fueled unprecedented device and supply turnover impelling wealthy hospitals to upgrade continually and sell, donate, recycle, or dispose of used, expired, antiquated, or surplus goods. This paper reviews the issues related to device and supply lifecycles and discusses the opportunities and challenges they present for sustainable surgical growth in low- and middle-income (LMICs) countries., Observations: This review found, in LMICs countries, regulatory disparities persist that limit effective harmonization secondary to highly variable national policies and a lack of prioritized enforcement. Heterogeneity in the regulatory landscape, specifically in the classification, nomenclature, and identification of medical devices, encumbers effective regulation and distribution. Once devices are sold, donated, or reused in LMICs countries, complexities arise in regulatory compliance, maintenance, and appropriate use of these technologies. At the end of the lifecycle, waste management poses significant obstacles with limited resources hindering the implementation of best practices., Conclusion: There are major disparities in access to quality surgical equipment and supplies around the world. Improved communication between relevant stakeholders and harmonization of manufacture and disposal regulations will be needed to ensure adequate and appropriate responses to these challenges., Trial Registration Number: Not applicable., (© 2024 The Authors. World Journal of Surgery published by John Wiley & Sons Ltd on behalf of International Society of Surgery/Société Internationale de Chirurgie (ISS/SIC).)

To ensure the safe use of materials, one must assess the identity and quantity of exposure. Solid materials, such as plastics, metals, coatings and cements, degrade to some extent during their life cycle, and releases can occur during manufacturing, use and end-of-life. Releases (e.g., what is released, how does release happen, and how much material is released) depend on the composition and internal (nano)structures of the material as well as the applied stresses during the lifecycle. We consider, in some depth, releases from mechanical, weathering and thermal stresses and specifically address the use cases of fused-filament 3D printing, dermal contact, food contact and textile washing. Solid materials can release embedded nanomaterials, composite fragments, or micro- and nanoplastics, as well as volatile organics, ions and dissolved organics. The identity of the release is often a heterogenous mixture and requires adapted strategies for sampling and analysis, with suitable quality control measures. Control materials enhance robustness by enabling comparative testing, but reference materials are not always available as yet. The quantity of releases is typically described by time-dependent rates that are modulated by the nature and intensity of the applied stress, the chemical identity of the polymer or other solid matrix, and the chemical identity and compatibility of embedded engineered nanomaterials (ENMs) or other additives. Standardization of methods and the documentation of metadata, including all the above descriptors of the tested material, applied stresses, sampling and analytics, are identified as important needs to advance the field and to generate robust, comparable assessments. In this regard, there are strong methodological synergies between the study of all solid materials, including the study of micro- and nanoplastics. From an outlook perspective, we review the hazard of the released entities, and show how this informs risk assessment. We also address the transfer of methods to related issues such as tyre wear, advanced materials and advanced manufacturing, biodegradable polymers, and non-solid matrices. As the consideration of released entities will become more routine in industry via lifecycle assessment in Safe-and-Sustainable-by-Design practices, release assessments will require careful design of the study with quality controls, the use of agreed-on test materials and standardized methods where these exist and the adoption of clearly defined data reporting practices that enable data reuse, meta-analyses, and comparative studies., Competing Interests: Declaration of competing interest WW is employee of BASF SE, a company that markets several of the material classes that are in scope of this review., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Sclerotinia sclerotiorum is a cosmopolitan and typical necrotrophic phytopathogenic fungus that infects hundreds of plant species. Because no cultivars highly resistant to S. sclerotiorum are available, managing Sclerotinia disease caused by S. sclerotiorum is still challenging. However, recent studies have demonstrated that S. sclerotiorum has a beneficial effect and can live mutualistically as an endophyte in graminaceous plants, protecting the plants against major fungal diseases. An in-depth understanding of the schizotrophic lifestyle of S. sclerotiorum during interactions with plants under different environmental conditions will provide new strategies for controlling fungal disease. In this review, we summarize the pathogenesis mechanisms of S. sclerotiorum during its attack of host plants as a destructive pathogen and discuss its lifestyle as a beneficial endophytic fungus., (© 2024 The Authors. Molecular Plant Pathology published by British Society for Plant Pathology and John Wiley & Sons Ltd.)

Nutritional requirements of individuals vary across the lifecycle, according to activity, age and gender. To optimize human health, consideration of nutritional priorities at each stage is needed. This conference brought together multidisciplinary experts in maternal and child nutrition and health, cardiometabolic and plant-based nutrition and dietitians involved in the care of vulnerable populations, plus nutritional metabolism, health and ageing. The presentations highlighted the most important nutrition research in these areas, updating knowledge and suggesting how dietary advice and policy could be adapted to incorporate research findings. With the global increase in non-communicable disease (NCD) and nutrition being considered as a key modifiable risk factor for the prevention and management of NCD, this conference was much needed.

Bacteriophage (phage) KHP40 was previously isolated from the supernatant of a culture of Helicobacter pylori KMT83 cells. In this study, we analysed the infection characteristics of KHP40, phage release pattern from KMT83 cells, and state of KHP40 DNA in KMT83 cells. The findings revealed that KHP40 phage showed varied adsorption efficiencies for different strains, long latent periods, and small burst sizes. Additionally, KHP40 activity was maintained at pH 2.5-12. KHP40 phages were released during the vegetative growth phase of the KMT83 cells. PCR analysis demonstrated that KHP40 DNA was stably maintained in KMT83 clones. Next-generation sequencing analysis revealed the presence of two distinct types of circular double-stranded DNA in H. pylori KMT83 cells. One was an H. pylori-specific DNA consisting of 1 578 403 bp, and the other was a 26 412-bp sequence that represented the episomal form of phage KHP40 DNA. Furthermore, defective KHP40-lysogenic DNA was detected in the H. pylori-specific DNA, the deleted portion of which appeared to have been transferred to another location in the bacterial genome. These findings indicate that KHP40 DNA exists in both episomal and defectively lysogenized states in KMT83 cells, and active phages are produced from KHP40-episomal DNA., (© The Author(s) 2024. Published by Oxford University Press on behalf of FEMS.)

Objectives: Lack of evidence regarding safety and effectiveness at market entry is driving the need to consider adopting a lifecycle approach to evaluating medical devices, but it is unclear what lifecycle evaluation means. This research sought to explore the tacit meanings of "lifecycle" and "lifecycle evaluation" as embodied within evaluation models/frameworks used for medical devices., Methods: Drawing on qualitative evidence synthesis methods and using an inductive approach, novel methods were developed to identify, appraise, analyze, and synthesize lifecycle evaluation models used for medical devices. Data was extracted (including purpose; audience; characterization; outputs; timing; and type of model) from key texts for coding, categorization, and comparison, exploring embodied meaning across four broad perspectives., Results: Fifty-two models were included in the synthesis. They demonstrated significant heterogeneity of meaning, form, scope, timing, and purpose. The "lifecycle" may represent a single stage, a series of stages, a cycle of innovation, or a system. "Lifecycle evaluation" focuses on the overarching goal of the stakeholder group, and may use a single or repeated evaluation to inform decision-making regarding the adoption of health technologies (Healthcare), resource allocation (Policymaking), investment in new product development or marketing (Trade and Industry), or market regulation (Regulation). The adoption of a lifecycle approach by regulators has resulted in the deferral of evidence generation to the post-market phase., Conclusions: Using a "lifecycle evaluation" approach to inform reimbursement decision-making must not be allowed to further jeopardize evidence generation and patient safety by accepting inadequate evidence of safety and effectiveness for reimbursement decisions.

Abstract: Renewable sources produced close to one-third of the world's electricity in 2023. However, a limited but growing body of research suggests rapid renewable energy development is leading to conflict and resource exploitation in energy-transitioning communities. Such injustices are attributable to the extractivist nature of renewable energy development, where raw materials, also known as Clean Energy Technology Materials (CETMs), are in limited quantities and often concentrated in resource-constrained zones in the Global South. In this perspective, we call for an urgent need for energy justice considerations in CETM's supply chain. We used demand projection data from 2020 to 2040 to look into the effects of important CETMs like nickel, cobalt, and lithium on distributive justice. We also examined the potential of these effects to tackle systemic injustices such as conflict, labor exploitation, and transactional colonialism. Next, we analyzed global mining production data from the United States Geological Survey using a CETM life cycle lens and found that increasing demand for these materials is exacerbating restorative injustices, particularly in the Global South. Finally, building on the above evidence, we called for the creation of multi-stakeholder partnerships and the establishment of fair trade standards across the critical CETM supply chain., Highlights: Here, we analyzed the projected demand growth for selected clean energy technology materials by 2040 relative to 2020 levels using data from the International Energy Agency, visualized their global mining production using data from the United States Geological Survey, explained how the demand for these materials is exacerbating certain injustices, and recommended multi-stakeholder partnerships across the supply chain of these materials., Discussion: The rapid growth of renewable energy technologies is creating injustices throughout the supply chain of clean energy technology materials (CETM).A lack of any energy justice framework across CETMs' extraction, processing, decommissioning, and recycling is exacerbating restorative injustices, especially in the Global South.By examining the projected demands and geospatial patterns for the extraction of minerals, metals, and other materials essential for clean energy technology development, the inequities faced by impoverished, marginalized, and Indigenous communities become apparent.We argue that if coffee can have fair trade standards across its supply chain, why can't we have similar considerations for the CETMs?There is a need to include transparency in the sustainability, ethics, and energy efficiency of CETM extraction and processing through global partnerships across its supply chain., Competing Interests: Conflict of interestThe authors declare no competing interests., (© The Author(s) 2024.)

Background: Mpox, a newly discovered zoonotic infection, can be transmitted from animal to human and between humans. Serological and genomic studies are used to identify the virus., Objective: Currently, there are no proven effective treatments for Mpox. Also, the safety and efficacy of intravenous vaccinia immune globulin, oral Tecovirimat (an inhibitor of intracellular viral release), and oral Brincidofovir (a DNA polymerase inhibitor) against the Mpox virus are uncertain, highlighting the need for more effective and safe treatments. As a result, drug repurposing has emerged as a promising strategy to identify previously licensed drugs that can be repurposed to treat Mpox., Results: Various approaches have been employed to identify previously approved drugs that can target specific Mpox virus proteins, including thymidylate kinase, D9 decapping enzyme, E8 protein, Topoisomerase1, p37, envelope proteins (D13, A26, and H3), F13 protein, virus's main cysteine proteases, and DNA polymerase., Conclusion: In this summary, we provide an overview of potential drugs that could be used to treat Mpox and discuss the underlying biological processes of their actions., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

The emergence of disease in shrimp has governed much concern in food safety and security among consumers with the recent reports on hepatopancreatic microsporidiosis (HPM) caused by Enterocytozoon hepatopenaei (EHP). The microsporidians present in shrimp remain a silent pathogen that prevents optimal shrimp growth. However, the biggest threat is in its food safety concerns, which is the primary focus in ensuring food biosecurity and biosafety. Hence, the objective of this review is to summarise the current knowledge of EHP and its infection in shrimp with food safety concerns. This paper provides an analysis of the diagnostic methods for detecting EHP infections in shrimp aquaculture. Interventions with current molecular biology and biotechnology would be the second approach to addressing EHP diseases. Finally, a systematic guideline for shrimp food safety using diagnostic and intervention is proposed. Thus, this review was aimed to shed light on effective methods for the diagnosis and prevention of EHP infection in shrimp. We also include information on molecular and genomics tools as well as innate immune biomolecules as future targets in the intervention strategies on the microsporidsosis life cycle in shrimp and its environment. Overall, this will result in reduced disease outbreaks in shrimp aquaculture, ensuring the shrimp food safety in the future.

The amoeba parasite Entamoeba histolytica is the causative agent of human amebiasis, an enteropathic disease affecting millions of people worldwide. This ancient protozoan is an elementary example of how parasites evolve with humans, e.g. taking advantage of multiple mechanisms to evade immune responses, interacting with microbiota for nutritional and protective needs, utilizing host resources for growth, division, and encystation. These skills of E. histolytica perpetuate the species and incidence of infection. However, in 10% of infected cases, the parasite turns into a pathogen; the host-parasite equilibrium is then disorganized, and the simple lifecycle based on two cell forms, trophozoites and cysts, becomes unbalanced. Trophozoites acquire a virulent phenotype which, when non-controlled, leads to intestinal invasion with the onset of amoebiasis symptoms. Virulent E. histolytica must cross mucus, epithelium, connective tissue and possibly blood. This highly mobile parasite faces various stresses and a powerful host immune response, with oxidative stress being a challenge for its survival. New emerging research avenues and omics technologies target gene regulation to determine human or parasitic factors activated upon infection, their role in virulence activation, and in pathogenesis; this research bears in mind that E. histolytica is a resident of the complex intestinal ecosystem. The goal is to eradicate amoebiasis from the planet, but the parasitic life of E. histolytica is ancient and complex and will likely continue to evolve with humans. Advances in these topics are summarized here.

The conventional view of vitamins reflects a diverse group of small molecules that facilitate critical aspects of metabolism and prevent potentially fatal deficiency syndromes. However, vitamins also contribute to the shaping and maintenance of the human phenome over lifecycle and evolutionary timescales, enabling a degree of phenotypic plasticity that operates to allow adaptive responses that are appropriate to key periods of sensitivity (i.e., epigenetic response during prenatal development within the lifecycle or as an evolved response to environmental challenge over a great many lifecycles). Individually, vitamins are important, but their effect is often based on nutrient-nutrient (vitamin-vitamin), nutrient-gene (vitamin-gene), and gene-gene interactions, and the environmental influence of shifting geophysical cycles, as well as evolving cultural practices. These ideas will be explored within what I refer to as the "adaptive vitome (vitomics)" paradigm., (© 2023 The Authors. BioEssays published by Wiley Periodicals LLC.)

We address the problem of defining selection and extracting the adaptive part of evolutionary change, originally formalized by Fisher and Price. Conventionally, selection and adaptation are defined through fitness attributed to genes or genotypes chosen as units of selection. The construction through fitness is known to suffer ambiguities and omissions as a theory of change due to selection. We construct an alternative framing in which units of selection and fitness are replaced as the main abstractions by formal lifecycle models and reproduction rates through genetically distinct lifecycle realizations. Graphical representations of lifecycles express relations among reproductive stages that cannot be assigned to any one unit of selection. The lifecycle partition refines the statistics of overall reproductive success and resolves modes of selection that fitness either excludes or distorts through additive projections. We derive the Price equation in the basis of lifecycle realizations and compare it to the conventional Price equation for additive fitness of organisms. We show how the lifecycle approach recovers fitnesses acting concurrently at multiple levels, or contrasts forms of competition within and between levels that are invisible to additive fitness. Defining selection through lifecycles recasts population genetics from an object-focused to a construction- and process-focused representation., (© The Author(s) 2023. Published by Oxford University Press on behalf of The Society for the Study of Evolution (SSE). All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.)

Infections by Sarcocystis in cattle are ubiquitous worldwide. There is considerable debate concerning the identity of Sarcocystis spp. in cattle. Proper diagnosis of Sarcocystis spp. is important to assess their economic and public health importance. Currently there are seven named species: Sarcocystis hirsuta, Sarcocystis cruzi, Sarcocystis hominis, Sarcocystis bovifelis, arcocystis heydorni, Sarcocystis bovini and Sarcocystis rommeli. Additionally, there are unnamed Sarcocystis spp. Two species, S. hominis and S. heydorni, are zoonotic. One out of seven species (S. hirsuta, contracted from cats) forms macroscopic cysts which can be visible during carcass inspection. Current molecular characterization is based on DNA extracted from sarcocysts from naturally infected cattle because DNA was not characterized from tissues of experimentally infected cattle or feces of experimentally infected definitive hosts. Sarcocystis cruzi (transmitted via canids) is recognized as the most pathogenic species and it causes abortion, low milk yield, poor body growth, and outbreaks of clinical sarcocystosis and death. Additionally, Sarcocystis infections have been linked to an inflammatory condition of striated muscles termed bovine eosinophilic myositis (BEM). Cattle affected by BEM appear clinically normal. Diagnosis of BEM at slaughter occurs when inspecting the carcass surface, or once the carcass has been divided into prime cuts or quarters. Sex and breed have no apparent influence on prevalence of BEM. The condition evidently occurs with equal frequency in steers, cows, and heifers. Virtually all striated muscles can be affected including skeletal muscles, the muscles of the eye, larynx, and the heart. In the USA, regulations require condemnation of BEM-affected parts, or (in severe cases) the entire carcass. These aesthetic considerations result in economic losses. Cattle experimentally infected with Sarcocystis did not have BEM at slaughter. Here, we review the status of Sarcocystis spp. and BEM in cattle including prevalence, lesions, epidemiology, and association of BEM with different species of Sarcocystis., (Published by Elsevier Ltd.)

Delia planipalpis (Stein) (Diptera: Anthomyiidae) is a pest of crucifers, such as broccoli, radish, cauliflower, turnip and cabbage. It has been recently described in Mexico as a significant emerging pest of broccoli. Due the lack of knowledge of this pest, the present study aimed to determine its life cycle, female sexual maturation, copulation, oviposition behavior and adult longevity. The identity of the fly in Mexico was confirmed genetically by sequencing the cytochrome oxidase subunit 1 gene ( COI ). The mean development time of D. planipalpis was 32-33 days on radish at 24 °C under laboratory conditions. Females became sexually mature 1-2 days after emergence, and the highest incidence of matings was recorded on the second day (60%). Under choice conditions, D. planipalpis females preferred to oviposit on radish plants, rather than broccoli plants, possibly due to the use of radish for rearing the laboratory colony. Oviposition and the mean number of eggs laid varied among the broccoli varieties, with the highest oviposition observed on the Tlaloc variety. Repeated attempts to rear the laboratory colony on broccoli plants failed. Radish-reared insects of both sexes lived longer when individualized in the adult stage (14.5-22.5 days) than when adult flies were maintained in groups (10-11 days). This study contributes to the understanding of D. planipalpis biology and provides information that can be used to establish future control strategies against this pest.

The lifecycle of Brachymeria podagrica, a parasitic wasp with a worldwide distribution, was studied under laboratory conditions using the flesh fly, Sarcophaga dux, as a host. Two hundred parasite-free 3rd instars of S. dux were exposed for 24 h to 20 female B. podagrica. In daily intervals, maggots and later pupae were examined for developmental stages of the parasitoid. The whole pre-imaginal development at a temperature of 26 °C lasted 21 to 26 days. Three morphologically different instars, followed by a prepupal and a pupal stage, were described using light and scanning electron microscopy. In a second experiment with 100 3rd stage Sarcophaga larvae and 10 parasitoids, a total of 70 wasps emerged 20 to 25 days after exposure. Two fly larvae did not pupate and dried out, while 28 pupae contained a dry or caseous content, dead wasp imagos, or their larval stages. No fly imagines emerged from exposed groups, while all 100 unexposed larvae pupated and adults eclosed between day 12 and day 14 after the start of the experiment, while the imagoes of the parasitoids appeared 8 to 12 days later., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

There are many benefits to be realized by applying a disaster risk reduction framework to the context of plastic pollution, especially in regards to operationalizing the precautionary principle that is inherent in many international treaties and conventions. We explore the implications of framing plastic pollution as a 'disaster' in light of the development of the new global instrument to end plastic pollution by aligning the objectives of the United Nations (UN) Sendai Framework for Disaster Risk Reduction 2015-2030 (SF) and the UN Sustainable Development Goals (SDGs); and thereby also complementing the many climate and non-climate mandates embedded within the UN Framework Convention on Climate Change (UNFCCC). It has been proposed that the UN global instrument to end plastic pollution could be based on the guidelines of the Paris Agreement (PA), driven by national action plans, potential to offset and mandatory reporting requirements. Adding a disaster risk reduction lens to this approach will strongly complement and enhance the environmental and human health outcomes aspired for the global and legally binding treaty to end plastic pollution. We provide an overview to reinforce the mutual benefits of cooperation and coordination, linking the SF, UNFCCC and SDGs to the future international instrument., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier B.V.)

This historical article examines post-WWII Yugoslavia and the state's campaigns to modernise and unify the extensive Yugoslav peasantry, and draws comparisons with other countries from the Communist Bloc. It argues that even though Yugoslavia ostensibly set out to create a new 'Yugoslav way' that was dissimilar to Soviet socialism, its tactics and underlying motivations were very similar to those of the Soviet modernisation projects. The article analyses the evolving concept of the vračara (elder women folk healers) as a vehicle for the state's modernising mission. Just as Soviet babki represented a threat to the new 'social order' in Russia, vračare were the targets of the Yugoslav state's anti-folk-medicine propaganda. It also argues that reproductive health provided a moment in the lifecycle when the state attempted to bind women to its services. The first part of the article deals with the bureaucratic push to disempower village wise women using propaganda campaigns and the introduction of medical facilities in remote communities. Even though the medicalization process ultimately failed to fully establish science-based medical services in all areas of the Yugoslav Republic, the negative image of the old crone healer endured well beyond the first post-war decade. The second half of the article examines the gendered stereotype of the old crone and how she became a stand-in for everything backward and undesirable relative to modern medicine., (Copyright © 2022 Elsevier Inc. All rights reserved.)

With the use of vehicles, large amounts of carbon dioxide are emitted by combustion of gasoline and energy consumes in their lifecycle. Therefore, the objective of this study is to evaluate the lifecycle carbon emission and primary energy input of a widely used sport utility vehicle (SUV) in China with the lifecycle assessment method. The results show that total petrol consumption of an SUV in lifetime is 21,300 kg; the CO 2 emissions and primary energy input in the manufacturing, assembly, operation, and decommissioning phase are respectively 8857, 443, 54,925, and 443 kg and 123,413, 6171, 12,341, and 6171 MJ. The average CO 2 emission intensity and energy input intensity of materials are respectively 2.74 kg/kg and 64.9 MJ/kg. The primary energy input of materials in manufacturing phase occupies 83.3%, and CO 2 emission in use phase is 64,267.3 kg (occupied 92.62%), mainly attributed to the combustion of petrol., (© 2022. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

Governments across the world are taking actions to address the high carbon emissions associated with the construction industry, and to achieve the long-term goals of the Paris Agreement towards carbon neutrality. Although the ideal of the carbon-emission reduction in building projects is well acknowledged and generally accepted, it is proving more difficult to implement. The application of building information modeling (BIM) brings about new possibilities for reductions in carbon emissions within the context of sustainable buildings. At present, the studies on BIM associated with carbon emissions have concentrated on the design stage, with the topics focusing on resource efficiency (namely, building energy and carbon-emission calculators). However, the effect of BIM in reducing carbon emissions across the lifecycle phases of buildings is not well researched. Therefore, this paper aims to examine the relationship between BIM, carbon emissions, and sustainable buildings by reviewing and assessing the current state of the research hotspots, trends, and gaps in the field of BIM and carbon emissions, providing a reference for understanding the current body of knowledge, and helping to stimulate future research. This paper adopts the macroquantitative and microqualitative research methods of bibliometric analysis. The results show that, in green-building construction, building lifecycle assessments, sustainable materials, the building energy efficiency and design, and environmental-protection strategies are the five most popular research directions of BIM in the field of carbon emissions in sustainable buildings. Interestingly, China has shown a good practice of using BIM for carbon-emission reduction. Furthermore, the findings suggest that the current research in the field is focused on the design and construction stages, which indicates that the operational and demolition stages have greater potential for future research. The results also indicate the need for policy and technological drivers for the rapid development of BIM-driven carbon-emission reduction.

Digital health and mobile medical apps (MMAs) have shown great promise in transforming health care, but their adoption in clinical care has been unsatisfactory, and regulatory guidance and coverage decisions have been lacking or incomplete. A multidimensional assessment framework for regulatory, policymaking, health technology assessment, and coverage purposes based on the MMA lifecycle is needed. A targeted review of relevant policy documents from international sources was conducted to map current MMA assessment frameworks, to formulate 10 recommendations, subsequently shared amongst an expert panel of key stakeholders. Recommendations go beyond economic dimensions such as cost and economic evaluation and also include MMA development and update, classification and evidentiary requirements, performance and maintenance monitoring, usability testing, clinical evidence requirements, safety and security, equity considerations, organizational assessment, and additional outcome domains (patient empowerment and environmental impact). The COVID-19 pandemic greatly expanded the use of MMAs, but temporary policies governing their use and oversight need consolidation through well-developed frameworks to support decision-makers, producers and introduction into clinical care processes, especially in light of the strong international, cross-border character of MMAs, the new EU medical device and health technology assessment regulations, and the Next Generation EU funding earmarked for health digitalization., (© 2022 The Authors. Health Economics published by John Wiley & Sons Ltd.)

With the introduction in recent years of high-yield blight-resistant chestnut varieties, the commercial chestnut industry in the United States is expanding. Accompanying this expansion is a resurgence in a primary pest of chestnut: C. sayi , the lesser chestnut weevil. This weevil damages the nut crop and infestations can surge from 0 to close to 100% in as little as two years. Understanding the dynamics of this pest has been challenging. Most work was conducted in the 1900s and only recently has this weevil garnered renewed interest. Recent work on C. sayi phenology has been completed in Missouri but conflicted with anecdotal reports from northern growers. From 2019 to 2020, we used a combination of trapping and microcosm studies to understand both C. sayi phenology and the means of monitoring this pest. C. sayi populations were univoltine and peaked in mid-October. Pyramid traps were the most effective at capturing adult C. sayi . C. sayi larvae, pupae, eclosed adults, and emerging adults were recovered from microcosm experiments. These results suggest that C. sayi emerges later in the northern US with the potential for a single generation to emerge over multiple subsequent years. Understanding C. sayi phenology along with the means of monitoring forms the basis for effective management and control in commercial chestnut orchards.

The COVID-19 pandemic greatly accelerated the use of online technologies for communication, as opposed to contact involving physical presence and touch. This commentary further considers the consequences of this change in individual human terms, in everyday as well as medical situations. It is a kind of discussion paper, specially written for this journal. It develops two directions of argument, the first about the reality of embodiment, the second about figures of speech involving touch and movement, figures of speech about the actions of whole people rather than about mind (spirit) or body separately. The discussion reviews the nature of differences between communication involving physical proximity and physical distance (and electronic media), with comments on the positive and negative aspects of each. An emphasis on the significance of touch (and movement, since all touch involves movement) to people is linked to the basic aspects of the lifecycle in birth, reproduction, and death. In conclusion, the discussion emphasizes the traditional importance of touch and physical participation to people's feeling for reality. New digital forms of relations disturb this feel, with significant consequences., Competing Interests: Conflict of interests: The author declares no conflict of interest in the preparation of this article., (© Authors, 2022.)

Artificial intelligence applications for health care have come a long way. Despite the remarkable progress, there are several examples of unfulfilled promises and outright failures. There is still a struggle to translate successful research into successful real-world applications. Machine learning (ML) products diverge from traditional software products in fundamental ways. Particularly, the main component of an ML solution is not a specific piece of code that is written for a specific purpose; rather, it is a generic piece of code, a model, customized by a training process driven by hyperparameters and a dataset. Datasets are usually large, and models are opaque. Therefore, datasets and models cannot be inspected in the same, direct way as traditional software products. Other methods are needed to detect failures in ML products. This report investigates recent advancements that promote auditing, supported by transparency, as a mechanism to detect potential failures in ML products for health care applications. It reviews practices that apply to the early stages of the ML lifecycle, when datasets and models are created; these stages are unique to ML products. Concretely, this report demonstrates how two recently proposed checklists, datasheets for datasets and model cards, can be adopted to increase the transparency of crucial stages of the ML lifecycle, using ChestX-ray8 and CheXNet as examples. The adoption of checklists to document the strengths, limitations, and applications of datasets and models in a structured format leads to increased transparency, allowing early detection of potential problems and opportunities for improvement. Keywords: Artificial Intelligence, Machine Learning, Lifecycle, Auditing, Transparency, Failures, Datasheets, Datasets, Model Cards Supplemental material is available for this article. © RSNA, 2022., Competing Interests: Disclosures of Conflicts of Interest: C.G. No relevant relationships. O.M. No relevant relationships., (2022 by the Radiological Society of North America, Inc.)

Abstract: Metals and alloys are among the most technologically important materials for our industrialized societies. They are the most common structural materials used in cars, airplanes and buildings, and constitute the technological core of most electronic devices. They allow the transportation of energy over great distances and are exploited in critical parts of renewable energy technologies. Even though primary metal production industries are mature and operate optimized pyrometallurgical processes, they extensively rely on cheap and abundant carbonaceous reactants (fossil fuels, coke), require high power heating units (which are also typically powered by fossil fuels) to calcine, roast, smelt and refine, and they generate many output streams with high residual energy content. Many unit operations also generate hazardous gaseous species on top of large CO 2 emissions which require gas-scrubbing and capture strategies for the future. Therefore, there are still many opportunities to lower the environmental footprint of key pyrometallurgical operations. This paper explores the possibility to use greener reactants such as bio-fuels, bio-char, hydrogen and ammonia in different pyrometallurgical units. It also identifies all recycled streams that are available (such as steel and aluminum scraps, electronic waste and Li-ion batteries) as well as the technological challenges associated with their integration in primary metal processes. A complete discussion about the alternatives to carbon-based reduction is constructed around the use of hydrogen, metallo-reduction as well as inert anode electrometallurgy. The review work is completed with an overview of the different approaches to use renewable energies and valorize residual heat in pyrometallurgical units. Finally, strategies to mitigate environmental impacts of pyrometallurgical operations such as CO 2 capture utilization and storage as well as gas scrubbing technologies are detailed. This original review paper brings together for the first time all potential strategies and efforts that could be deployed in the future to decrease the environmental footprint of the pyrometallurgical industry. It is primarily intended to favour collaborative work and establish synergies between academia, the pyrometallurgical industry, decision-makers and equipment providers., Highlights: A more sustainable production of metals using greener reactants, green electricity or carbon capture is possible and sometimes already underway. More investments and pressure are required to hasten change., Discussion: Is there enough pressure on the aluminum and steel industries to meet the set climate targets?The greenhouse gas emissions of existing facilities can often be partly mitigated by retrofitting them with green technologies, should we close plants prematurely to build new plants using greener technologies?Since green or renewable resources presently have limited availability, in which sector should we use them to maximize their benefits?, Competing Interests: Conflict of interestOn behalf of all authors, the corresponding author states that there is no conflict of interest., (© The Author(s) 2022.)

This paper establishes a unified framework to fully account for the changing social gradient over the lifecycle in terms of a sufficient set of mobility indices characterizing the coevolution of socioeconomic status and health within each of a series of overlapping cohorts. We proceed to demonstrate the impact of selective mortality on health inequality changes, making use of a counterfactual health distribution for the start of the study period that leaves out those who are known to die before the end. Specifically, initial differences between the average health and educational attainment rank of survivors and nonsurvivors are found in our empirical study to be an increasingly important factor explaining changes in the education-health gradient in older cohorts in Great Britain. Our identification strategy has the advantage that it does not require the imputation of the "would be" health of nonsurvivors, which if carried out using inverse probability weighting procedures-as in several previous studies-is shown to bias estimates of this direct effect of selective mortality toward zero. Parallel results for the income-health gradient exhibit stronger confounding influences due to a number of other factors given that income is a less stable indicator of socioeconomic status in adulthood., (© 2021 The Authors. Health Economics published by John Wiley & Sons Ltd.)

White lupin ( Lupinus albus ) represents an important legume crop in Europe and other parts of the world due to its high protein content and potential for low-input agriculture. However, most cultivars are susceptible to anthracnose caused by Colletotrichum lupini, a seed- and air-borne fungal pathogen that causes severe yield losses. The aim of this work was to develop a C. lupini- specific quantitative real-time TaqMan PCR assay that allows for quick and reliable detection and quantification of the pathogen in infected seed and plant material. Quantification of C . lupini DNA in dry seeds allowed us to distinguish infected and certified (non-infected) seed batches with DNA loads corresponding to the disease score index and yield of the mother plants. Additionally, C. lupini DNA could be detected in infected lupin shoots and close to the infection site, thereby allowing us to study the disease cycle of this hemibiotrophic pathogen. This qPCR assay provides a useful diagnostic tool to determine anthracnose infection levels of white lupin seeds and will facilitate the use of seed health assessments as a strategy to reduce the primary infection source and spread of this disease.

In order to successfully infect or colonize human hosts or survive changing environments, Aspergillus fumigatus needs to adapt through genetic changes or phenotypic plasticity. The genomic changes are based on the capacity of the fungus to produce genetic variation, followed by selection of the genotypes that are most fit to the new environment. Much scientific work has focused on the metabolic plasticity, biofilm formation or the particular genetic changes themselves leading to adaptation, such as antifungal resistance in the host. Recent scientific work has shown advances made in understanding the natural relevance of parasex and how both the asexual and sexual reproduction can lead to tandem repeat elongation in the target gene of the azoles: the cyp 51A gene. In this review, we will explain how the fungus can generate genetic variation that can lead to adaptation. We will discuss recent advances that have been made in the understanding of the lifecycle of A. fumigatus to explain the differences observed in speed and type of mutations that are generated under different environments and how this can facilitate adaptation, such as azole-resistance selection.

The urbanization process contributes to the growth of solid waste generation and causes an increase in environmental impacts and failures in the management of solid waste. The number of dumps is a concern due to the limited implementation and safe disposal of this waste. The interest in sustainable techniques has been growing in relation to waste management, which is largely absorbed by the civil construction sector. This work aimed to review plastic waste, especially polyethylene terephthalate (PET), that can be incorporated with construction materials, such as concrete, mortars, asphalt mixtures, and paving. The use of life-cycle assessment (LCA) is related, as a tool that allows the sustainability of products and processes to be enhanced in the long term. After analyzing the recent literature, it was identified that studies related to plastic wastes in construction materials concentrate sustainability around the alternative destination of waste. Since the plastic waste from different production chains are obtained, it was possible to affirm the need for a broader assessment, such as the LCA, providing greater quantification of data making the alternative processes and products more sustainable. The study contributes to enhance sustainability in alternative building materials through LCA.

Background: The blood feeding poultry red mite (PRM), Dermanyssus gallinae, causes substantial economic damage to the egg laying industry worldwide, and is a serious welfare concern for laying hens and poultry house workers. In this study we have investigated the temporal gene expression across the 6 stages/sexes (egg, larvae, protonymph and deutonymph, adult male and adult female) of this neglected parasite in order to understand the temporal expression associated with development, parasitic lifestyle, reproduction and allergen expression., Results: RNA-seq transcript data for the 6 stages were mapped to the PRM genome creating a publicly available gene expression atlas (on the OrcAE platform in conjunction with the PRM genome). Network analysis and clustering of stage-enriched gene expression in PRM resulted in 17 superclusters with stage-specific or multi-stage expression profiles. The 6 stage specific superclusters were clearly demarked from each other and the adult female supercluster contained the most stage specific transcripts (2725), whilst the protonymph supercluster the fewest (165). Fifteen pairwise comparisons performed between the different stages resulted in a total of 6025 Differentially Expressed Genes (DEGs) (P > 0.99). These data were evaluated alongside a Venn/Euler analysis of the top 100 most abundant genes in each stage. An expanded set of cuticle proteins and enzymes (chitinase and metallocarboxypeptidases) were identified in larvae and underpin cuticle formation and ecdysis to the protonymph stage. Two mucin/peritrophic-A salivary proteins (DEGAL6771g00070, DEGAL6824g00220) were highly expressed in the blood-feeding stages, indicating peritrophic membrane formation during feeding. Reproduction-associated vitellogenins were the most abundant transcripts in adult females whilst, in adult males, an expanded set of serine and cysteine proteinases and an epididymal protein (DEGAL6668g00010) were highly abundant. Assessment of the expression patterns of putative homologues of 32 allergen groups from house dust mites indicated a bias in their expression towards the non-feeding larval stage of PRM., Conclusions: This study is the first evaluation of temporal gene expression across all stages of PRM and has provided insight into developmental, feeding, reproduction and survival strategies employed by this mite. The publicly available PRM resource on OrcAE offers a valuable tool for researchers investigating the biology and novel interventions of this parasite.

Rhinoviruses (RVs) are the etiological agents of upper respiratory tract infections, particularly the common cold. Infections in the lower respiratory tract is shown to cause severe disease and exacerbations in asthma and COPD patients. Viruses being obligate parasites, hijack host cell pathways such as programmed cell death to suppress host antiviral responses and prolong viral replication and propagation. RVs are non-enveloped positive sense RNA viruses with a lifecycle fully contained within the cytoplasm. Despite decades of study, the details of how RVs exit the infected cell are still unclear. There are some diverse studies that suggest a possible role for programmed cell death. In this review, we aimed to consolidate current literature on the impact of RVs on cell death to inform future research on the topic. We searched peer reviewed English language literature in the past 21 years for studies on the interaction with and modulation of cell death pathways by RVs, placing it in the context of the broader knowledge of these interconnected pathways from other systems. Our review strongly suggests a role for necroptosis and/or autophagy in RV release, with the caveat that all the literature is based on RV-A and RV-B strains, with no studies to date examining the interaction of RV-C strains with cell death pathways.

This research note tests the proposition empirically that destinations have multiple lifecycles. It studies tourist arrivals to over 200 destination countries and economies over a 35 year period and applies Butler's parameters to map their lifecycles. Six different lifecycle patterns were identified. Empirical findings from this study echo's Baggio's conceptual notation by showcasing that destination lifecycles seems to follow specific traits commensurate with other destinations to form a typology of networked lifecycles. In other words, we go beyond the single-destination lifecycle paradigm to improvise a new research direction that centers on co-occurrence of destination changes that reflect a certain type of lifecycle. It paves the way by introducing the concept of destination coevolution as an analogy to describe lifecycle reciprocity among a cluster of destinations that undergo a similar evolutionary odyssey., Competing Interests: None., (© 2020 Elsevier Ltd. All rights reserved.)

This chapter gives an industry perspective of how digital twins are tangibly translated, implemented, and used in a biopharmaceutical environment. Technical prerequisites and components including data modeling, the lifecycle, and different skills which are required from people to be put together and collaborate efficiently with digital twins are discussed with practical examples which have been implemented in labs and in manufacturing.

Insect diapause is a state of arrested development persisting when conditions are favorable for growth. Prolonged diapause, which occurs when insects remain in diapause for multiple years, is uncommon. Mormon crickets Anabrus simplex Haldane, a katydid and pest of rangeland forage and crops, were thought to be biennial in the Bighorn Mountains of Wyoming, but they are able to prolong diapause in the egg stage for multiple years. To test whether parental photoperiod serves as a cue to prolong diapause, mating pairs from the Bighorn Mountains were set in the same daily temperature and humidity profiles with 20 pairs on short daylength (12:12 [L:D] h) and 20 on long daylength (15:9 [L:D] h). Almost every parental pair had some undeveloped eggs after two warm periods. Females in short daylength were not more likely to have eggs with a biennial life cycle, but they were more likely than those in long daylength to lay eggs with multi-annual life cycles. Parents on short daylength were more likely to lay inviable eggs. Other fitness measures, such as hatchling mass, nymphal survivorship, and adult mass were not different between parental treatments. Diapause termination distributed over multiple years probably constitutes a bet-hedging strategy in an unpredictable environment., (Published by Oxford University Press on behalf of Entomological Society of America 2020.)

Supportive attitudes towards intimate partner violence against women (IPVAW) normalize and promote these aggressive behaviors. As a result, more and more research is proposing the identification, analysis and intervention of these attitudes. However, the vast majority of this research focuses on students. The main objective of this paper is to analyze these supportive attitudes throughout the lifecycle. An opportunity sample of 200 Spanish participants, by age and sex fixed quotas, took part in this study. Attitudes were measured using the Inventory of Distorted Thoughts about Women and Violence, the Inventory of Beliefs about Intimate Partner Violence and the Gender Violence Implicit Association Test, a personalized form of Implicit Association Test (IAT). The results show that explicitly measured supportive attitudes towards intimate partner violence against women differ between age groups, adopting a U-shape distribution: lower acceptance among middle-aged-adults and young-adults and higher acceptance among adolescents and older adults. However, when these attitudes were implicitly measured, the IPVAW rejection increased with age, which is a counter-intuitive result and inconsistent with previous theoretical evidence. In summary, these results support an age effect that differs according to the measure of attitudes used and highlight some difficulties related to based-on-reaction-time measures among older people. This suggests the need for further research on the topic, especially among the older population.

Sami reindeer herders have considerable traditional knowledge about a neurological reindeer disease resembling elaphostrongylosis, but the causative agent was not identified prior to the description of the brainworm Elaphostrongylus rangiferi in Russia in 1958. Elaphostrongylosis was quickly recognised as a serious cause of reindeer morbidity and mortality. The ecology, epidemiology and pathophysiology of the disease were studied in Sweden and Norway during the 1960s and in particular the 1970s to 1990s. In Finland, elaphostrongylosis was not recognised as an important disease for Finnish reindeer husbandry, even though the presence of brainworm infection has been documented. Brainworm has an indirect lifecycle with snail and slug intermediate hosts. The free-living L1 larvae have extremely good freeze tolerance and can survive > 360 days at - 80 °C in water (solid ice). Even though reindeer brainworm is clearly well adapted to the Arctic chill, the lifecycle stages outside the reindeer final host are sped up at warmer environmental temperatures. Arctic summer temperatures are close to the developmental threshold of the parasite in the intermediate gastropod hosts (8-10 °C), and the parasite has typically had a 2-year life cycle. Disease outbreaks generally occur during the winter following the infection of reindeer with infected snails and slugs during the summer and autumn. Warmer summers result in faster development of brainworm larvae in the intermediate hosts. Clinical symptoms have been seen reported as early as August, such as in the outbreak in Trøndelag, Norway in 2018. The reindeer brainworm is also a cause of conflict between reindeer herders and small ruminant farmers, because it can cause severe disease in goats and sheep, which share pasture with reindeer. Many knowledge gaps remain if we wish to successfully predict and mitigate for large-scale outbreaks in a future with a predicted warmer, wetter and wilder climate.

This is an evidence from a high-income economy in Southeast Asia and a support for scientific planning of the energy sector in ensuring air pollution and climate change mitigation. A comparative analysis of the energy options for electricity generation in the nation was made considering availability, cost and greenhouse gases emission - CO 2 , N 2 O and CH 4 , using a two-stage method comprising multi-objective optimization and TOPSIS. The renewable (RE) and non-renewable energy (NRE) options available were assessed through the lifecycle approach to determine the lifecycle greenhouse gas emission (LCGHG) and levelized cost of energy (LCOE) per MWh of electricity. Considering historical electricity consumption, annual GDP and population growth from 1965, energy consumption for the year 2035 was forecasted using support vector machine regressor in Weka. Future plans in energy diversification pathways were examined through various scenario multi-objective optimizations with a constraint on resource availability and energy target using genetic algorithm in MATLAB. The outputs were ranked using TOPSIS method. Results showed that greenhouse gases emission could be reduced by 10.3 percent compared to business as usual scenario while the energy mix could attain 10 percent renewable energy in the grid at a relatively lower generation cost., (Copyright © 2019 Elsevier Ltd. All rights reserved.)