Search

The marine polysaccharide fucoidan (FUC) is a promising polymer for pharmaceutical research and development of novel drug delivery systems with modified release and targeted delivery. The presence of a sulfate group in the polysaccharide makes FUC an excellent candidate for the formation of interpolyelectrolyte complexes (PECs) with various polycations. However, due to the structural diversity of FUC, the design of FUC-based nanoformulations is challenging. This review describes the main strategies for the use of FUC-based PECs to develop drug delivery systems with improved biopharmaceutical properties, including nanocarriers in the form of FUC-chitosan PECs for pH-sensitive oral delivery, targeted delivery systems, and polymeric nanoparticles for improved hydrophobic drug delivery (e.g., FUC-zein PECs, core-shell structures obtained by the layer-by-layer self-assembly method, and self-assembled hydrophobically modified FUC particles). The importance of a complex study of the FUC structure, and the formation process of PECs based on it for obtaining reproducible polymeric nanoformulations with the desired properties, is also discussed.

Due to the presence of cationic units interpolyelectrolyte complexes (IPECs) can be used as a universal basis for preparation of biocidal coatings on different surfaces. Metallopolymer nanocomposites were successfully synthesized in irradiated solutions of polyacrylic acid (PAA) and polyethylenimine (PEI), and dispersions of non-stoichiometric IPECs of PAA-PEI containing silver ions. The data from turbidimetric titration and dynamic light scattering showed that pH 6 is the optimal value for obtaining IPECs. Metal polymer complexes based on IPEC with a PAA/PEI ratio equal to 3/1 and 1/3 were selected for synthesis of nanocomposites due to their aggregative stability. Studies using methods of UV-VIS spectroscopy and TEM have demonstrated that the size and spatial organization of silver nanoparticles depend on the composition of polymer systems. The average sizes of nanoparticles are 5 nm and 20 nm for complexes with a molar ratio of PAA/PEI units equal to 3/1 and 1/3, respectively. The synthesized nanocomposites were applied to the glass surface and exhibited high antibacterial activity against both gram-positive ( Staphylococcus aureus ) and gram-negative bacteria ( Salmonella ). It is shown that IPEC-Ag coatings demonstrate significantly more pronounced biocidal activity not only in comparison with macromolecular complexes of PAA-PEI, but also coatings of PEI and PEI based nanocomposites.

Benznidazole (BZ) is a first-line drug for the treatment of Chagas disease; however, it presents several disadvantages that could hamper its therapeutic success. Multiparticulate drug delivery systems (MDDS) are promising carriers to improve the performance of drugs. We developed BZ-loaded MDDS intended for improving Chagas disease therapy. To assess their efficacy and safety, Trypanosoma (T) cruzi infected BALB/c mice were orally treated with free BZ or BZ-MDDS at different regimens (doses of 50 and 100 mg/kg/day, administered daily or at 2- or 5-days intervals) and compared with infected non-treated (INT) mice. At 100 mg/kg/day, independent of the administration regimen, both treatments were able to override the parasitemia, and at 50 mg/kg/day significantly reduced it compared to INT mice. BZ-MDDS at a dose of 100 mg/kg/day administered every 5 days (BZ-MDDS 100-13d) induced the lowest cardiac parasite load, indicating an improved efficacy with lower total dose of BZ when loaded to the MDDS. Reactive oxygen species produced by leukocytes were higher in INT and mice treated with BZ at 50 mg/kg/day compared to 100 mg/kg/day, likely because of persistent infection. BZ-MDDS treatments markedly reduced heart and liver injury markers compared to INT mice and those receiving the standard treatment. Therefore, BZ-MDDS exhibited enhanced activity against T. cruzi infection even at lower doses and reduced administration frequency compared to free BZ while increasing the treatment safety. They likely avoid undesired side effects of BZ by keeping a sustained concentration, avoiding plasmatic drug peaks. BZ-MDDS evidenced significant improvements in experimental Chagas disease treatment and can be considered as a potential improved therapeutic alternative against this illness., (Copyright © 2021 Elsevier B.V. All rights reserved.)

In this study, volatile perfume was encapsulated in microcapsules (MCs) via interpolyelectrolyte complexes (IPECs) of oppositely charged polymers, with high encapsulation efficiency, to be delivered in a sustained manner. Positively charged chitosan (CTS) and negatively charged Eudragit® S100 (ES100) were used as eco-friendly biopolymers. Limonene (LMN) was selected as the model perfume. First, the solution of LMN in ethyl acetate and poloxamer 407 (POX407) in acidic solution was emulsified using ultrasonication. CTS and ES100 were added in that particular order to form o/w emulsion. LMN-loaded microcapsules (LMN-MCs) were prepared by adjusting the pH and freeze-drying for solidification. The electrostatic interactions of CTS and ES100 to form IPECs were highly dependent on pH, changing in the microscopic images of emulsion droplets and zeta potential. The NH 3 + group of CTS and the COO - group of ES100 caused the electrostatic interactions at a specific pH. The formation mechanism of LMN-MCs was successfully validated using instrumental analysis, charge density, and energy dispersive X-ray spectrometer (EDS) mapping. Encapsulation efficiency, loading content, and release rates of LMN-MCs varied according to the ratios of CTS and ES100, demonstrating optimal performance at a 1:1 ratio. The current LMN-MCs could provide a simple manufacturing process with high performance in terms of encapsulation efficiency (>94%), drug loading, yield and sustained release of volatile perfume for 120 h., (Copyright © 2021 Elsevier B.V. All rights reserved.)

The effect of the chemical structure of interpolyelectrolyte complexes (IPEC) based on polymers of natural origin (pectin - -chitosan + , pectin - -cationic starch (starch + ), carboxymethylcellulose (CMC - )-cationic β-cyclodextrin (β-CD + ), anionic starch (starch - )-cationic starch (starch + ) on the structure, morphology, thermomechanical and antimicrobial properties of silver-containing nanocomposites obtained by thermochemical reduction of Ag + ions in interpolyelectrolyte-metal complexes (IMC) was studied. Thermochemical reduction of Ag + ions in the IMC bulk for 30 min at 150 °C led to formation of silver-containing nanocomposites and this fact was confirmed by wide-angle X-ray scattering method. Transmission electron microscopy showed that different sized of silver nanoparticles were formed depending on the chemical structure of IPEC. The average size of silver nanoparticles was found to be 4.7 nm for pectin - -Ag-chitosan + ; 5.3 nm for pectin - -Ag-starch + ; 6.3 for CMC - -Ag-β-CD + and 9 nm for starch - -Ag-starch + , correspondingly. The nanocomposites having smaller average nanoparticle size exhibited higher antimicrobial activity against S. aureus and E. coli strains. Pectin - -Ag-chitosan + nanocomposites formed by thermochemical reduction of Ag + ions showed that the diameter of the inhibition zone against S. aureus and E. coli strains was 19.7 and 32.6 mm, respectively, whereas these values were 15.6 and 14 mm, respectively, for the same nanocomposites obtained by chemical reduction using ascorbic acid., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

By means of computer simulation and analytical theory, we first demonstrated that the interpolyelectrolyte complexes in dilute solution can spontaneously form hollow spherical particles with thin continuous shells (vesicles) or with porous shells (perforated vesicles) if the polyions forming the complex differ in their affinity for the solvent. The solvent was considered good for the nonionic groups of one macroion and its quality was varied for the nonionic groups of the other macroion. It was found that if the electrostatic interactions are weak compared to the attraction induced by the hydrophobicity of the monomer units, the complex in poor solvent tends to form "dense core-loose shell" structures of different shapes. The strong electrostatic interactions favor the formation of the layered, the hollow, and the filled structured morphologies with the strongly segregated macroions. Vesicles with perforated walls were distinguished as the intermediate between the vesicular and the structured solid morphologies. The order parameter based on the spherical harmonics expansion was introduced to calculate the pore distribution in the perforated vesicles depending on the solvent quality. The conditions of the core-shell and hollow vesicular-like morphologies formation were determined theoretically via the calculations of their free energy. The results of the simulation and theoretical approaches are in good agreement.

At present, a large amount of research from experimental and theoretical points of view has been done on interpolyelectrolyte complexes formed by electrostatic attractive forces and/or interpolymer complexes stabilized by hydrogen bonds. By contrast, relatively less attention has been given to polymer⁻polymer complex formation with synthetic polyampholytes (PA). In this review the complexation of polyampholytes with polyelectrolytes (PE) is considered from theoretical and application points of view. Formation of intra- and interpolyelectrolyte complexes of random, regular, block, dendritic polyampholytes are outlined. A separate subsection is devoted to amphoteric behavior of interpolyelectrolyte complexes. The realization of the so-called "isoelectric effect" for interpolyelectrolyte complexes of water-soluble polyampholytes, amphoteric hydrogels and cryogels with respect to surfactants, dye molecules, polyelectrolytes and proteins is demonstrated.

The structural organization and thermomechanical properties of nanocomposites prepared from interpolyelectrolyte-metal complex (IMC) involving anionic polyelectrolyte, pectin and AgNO 3 , and cationic polyelectrolyte, poly(4-vinylpyridine), have been investigated using the methods of wide- and small-angle X-ray scattering and thermomechanical analysis. It is established that chemical reduction of Ag + ions in the IMC by sodium borohydride results in formation of the nanocomposite based on the "pectin-poly(4-vinylpyridine)" interpolyelectrolyte complex (IPEC) and Ag 0 nanoparticles as well. At the same time, the level of nanocomposites' structural heterogeneity is substantially enhancing, while effective size of the heterogeneity regions decreases. The nanocomposites IPEC-Ag 0 prepared are shown much bigger T g value and enhanced ability for deformation than those for IMC.

Applying wide-angle X-ray scattering method, thermomechanical analysis, and differential scanning calorimetry, the structural organization and properties of nanocomposites formed by chemical reduction of Сu(2+) cations in the interpolyelectrolyte-metal complex (pectin-Cu(2+)-polyethyleneimine) under the influence of a constant magnetic and electric fields have been studied. It has been found that the chemical reduction of Cu(2+) cations in the interpolyelectrolyte-metal complex bulk under constant electric and magnetic fields leads to formation of nanocomposite consisting of interpolyelectrolyte complex, including pectin-polyethyleneimine and nanoparticles of the metal Cu phase, whereas nanocomposite with Cu/Cu2O nanoparticles is formed in original state (without any field). It was observed that, under constant field, nanocomposites obtained have higher structural glass-transition temperatures and thermal stability.

The article is devoted to the design, development and application of a new generation of binders for various dispersed systems, including soil, ground, sand, waste rock and others. The binders are formed by interaction of oppositely charged polyelectrolytes, both chemically stable and (bio)degradable. The fundamental aspects of interpolyelectrolyte reactions are discussed; the IPC structure and properties of the resulting interpolyelectrolyte complexes (IPCs) allow considering them as unique and universal binders. Numerous results of laboratory experiments and field trials of the IPC formulations are presented. In particular, large-scale tests have been done in the Chernobyl accident zone where the IPC binders were shown to be effective means to suppress water and wind erosion thereby preventing a spread of radioactive particles (radionuclides) from contaminated sites. Ecologically friendly IPC compositions are described, including those based on commercially available polymers; prospects for improving their efficiency and extending the range of their possible use are discussed., (Copyright © 2015 Elsevier B.V. All rights reserved.)

The demand for ever more complex nanostructures in materials and soft matter nanoscience also requires sophisticated characterization tools for reliable visualization and interpretation of internal morphological features. Here, we address both aspects and present synthetic concepts for the compartmentalization of nanoparticle peripheries as well as their in situ tomographic characterization. We first form negatively charged spherical multicompartment micelles from ampholytic triblock terpolymers in aqueous media, followed by interpolyelectrolyte complex (IPEC) formation of the anionic corona with bis-hydrophilic cationic/neutral diblock copolymers. At a 1:1 stoichiometric ratio of anionic and cationic charges, the so-formed IPECs are charge neutral and thus phase separate from solution (water). The high chain density of the ionic grafts provides steric stabilization through the neutral PEO corona of the grafted diblock copolymer and suppresses collapse of the IPEC; instead, the dense grafting results in defined nanodomains oriented perpendicular to the micellar core. We analyze the 3D arrangements of the complex and purely organic compartments, in situ, by means of cryogenic transmission electron microscopy (cryo-TEM) and tomography (cryo-ET). We study the effect of block lengths of the cationic and nonionic block on IPEC morphology, and while 2D cryo-TEM projections suggest similar morphologies, cryo-ET and computational 3D reconstruction reveal otherwise hidden structural features, e.g., planar IPEC brushes emanating from the micellar core.