Search

Green roofs and walls offer many benefits, not only in terms of the ecosystem services, but also in terms of improving building performance. The growing medium is the most important component of green roofs and walls. It should ensure stable plant growth with minimal maintenance and the proper choice is crucial for the survival and performance of the vegetation. In the study, we investigated how the source and supply of nutrients affects plant performance in a designed substrate for green walls and roofs. Topsoil from the site of plant origin mixed with sand and compost supplemented with mineral fertilizer was used to study the growth of Trifolium medium L. and Potentilla reptans L., element contents, oxidative stress level and photosynthetic efficiency. P. reptans was in most cases insensitive to mineral fertilization, but an adequate dose of compost improved its growth. T. medium was very sensitive to excessive mineral fertilization, which significantly impaired the growth and physiological status of the plants. Compost as the sole source of additional nutrients in a topsoil-based substrate seems to be the appropriate choice when legumes are used in a green wall or green roof. From the results obtained, we can conclude that calcareous grassland species can be successfully used in designing of green urban infrastructure., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2025 Elsevier Ltd. All rights reserved.)

The capacity of indoor plants including green walls to capture, deposit and remediate individual volatile organic compounds (VOCs) has been well documented. However, in realistic settings, plant systems are exposed to a complex mixture of VOCs from highly varied various emission sources. Gasoline vapour is one of the major sources of these emissions, containing high concentrations of the carcinogens benzene, toluene, ethylbenzene and xylene (BTEX). Using both solid phase micro extraction (SPME) and quick, easy, cheap, effective, rugged and safe (QuEChERS) sampling techniques, we assessed the dynamics of individual speciated gasoline VOC phytoremediation from the air and uptake within green wall plant species and growth substrates within a small passive green wall system, along with quantifying the phenotypic changes within the plant-associated bacterial communities resulting from gasoline exposure. Over 8 h the green wall system achieved 100% removal of atmospheric benzene, 1,2,3-trimethyl, eicosane and hexadecane, benzene 1,3-diethyl-; 1,3,5 cycloheptatriene,7- ethyl and carbonic acid eicosyl vinyl ester. All plant species tested demonstrated the accumulation 45 petrochemical VOCs (pVOCs) with Spathiphyllum wallisii successfully accumulating the majority of pVOC functional groups after 24 h of gasoline exposure. Within the plants phyllospheric bacterial communities, changes in both cellular complexity and granularity appeared to increase as a result of gasoline exposure, while cell size diminished. This work provides novel findings on the VOC removal processes of botanical systems for realistic and highly toxic VOC profiles., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

The escalating climate imbalance, coupled with rising water demands in rapidly expanding urban areas, is forcing scientists and policymakers to seek alternative strategies for efficient water resource management. Nature Based Solutions (NBS) are gaining prominence due to their ability to provide multiple ecosystem services. However, the quantification of benefits and drawbacks mediated by different vegetation species remains inadequate. In this study, we investigated the performance of a pot-based vertical greening system (VGS) designed to integrate the functions of green facades with those of treatment wetlands. The VGS was vegetated with Mentha aquatica L. (hereafter Mentha), Oenanthe javanica (Blume) DC. (hereafter Oenanthe) and Lysimachia nummularia L. (hereafter Lysimachia), and their respective effects on water balance and mass removal of common greywater pollutants were compared. Results indicated that VGS lines vegetated with Oenanthe and Mentha exhibited comparable pollutant removals. Oenanthe showed a preference for greywater that had already undergone partial treatment, while Mentha was not affected by any pollutant load in water removal -48.1 % of total inflow- and in nutrients uptake in aboveground biomass -14.3 % N and 7 % P- due to sustained and robust growth, outperforming Oenanthe and Lysimachia. This has suggested the potential use of Oenathe in combination with Mentha for enhanced performances, particularly given Oenanthe's rapid growth in the early season and high biomass and nitrogen content following initial greywater treatment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Combustion processes are the primary source of fine particulate matter in indoor air. Since the 1970s, plants have been extensively studied for their potential to reduce indoor air pollution. Leaves can retain particles on their surfaces, influenced by factors such as wax content and the presence of hairs. This study introduces an innovative experimental approach using metal oxide particles in an office-like environment to evaluate the depolluting effect of plant walls. Two plant walls were installed in a controlled room, housing three plant species: Aglaonema commutatum 'Silver Bay', Dracaena fragrans , and Epipremnum aureum . Metal oxide particles were introduced via a compressed air blower positioned between the two walls. The concentration of these particles was monitored using PM 2.5 sensors, and the deposition of iron (Fe) on the leaves was quantified through Inductively Coupled Plasma Mass Spectrometry (ICP-MS). This novel methodology effectively demonstrated the utility of both real-time sensors and ICP-MS in quantifying airborne particle concentrations and leaf deposition, respectively. The results revealed that Dracaena fragrans had a 44% higher Fe particle retention rate compared to the control (wallpaper). However, further validation through methodological replication is necessary to confirm the reproducibility of these findings.

Indoor air pollution affects the global population, especially in developed countries where people spend around 90% of their time indoors. The recent pandemic exacerbated the exposure by relying on indoor spaces and a teleworking lifestyle. VOCs are a group of indoor air pollutants with harmful effects on human health at low concentrations. It is widespread that plants can remove indoor VOCs. To this day, research has combined principles of phytoremediation, biofiltration, and bioremediation into a holistic and sustainable technology called botanical biofiltration. Overall, it is sustained that its main advantage is the capacity to break down and biodegrade pollutants using low energy input. This differs from traditional systems that transfer VOCs to another phase. Furthermore, it offers additional benefits like decreased indoor air health costs, enhanced work productivity, and well-being. However, many disparities exist within the field regarding the role of plants, substrate, and phyllosphere bacteria. Yet their role has been theorized; its stability is poorly known for an engineering approach. Previous research has not addressed the bioaugmentation of the phyllosphere to increase the performance, which could boost the system. Moreover, most experiments have studied passive potted plant systems at a lab scale using small chambers, making it difficult to extrapolate findings into tangible parameters to engineer the technology. Active systems are believed to be more efficient yet require more maintenance and knowledge expertize; besides, the impact of the active flow on the long term is not fully understood. Besides, modeling the system has been oversimplified, limiting the understanding and optimization. This review sheds light on the field's gains and gaps, like concepts, experiments, and modeling. We believe that embracing a multidisciplinary approach encompassing experiments, multiphysics modeling, microbial community analysis, and coworking with the indoor air sector will enable the optimization of the technology and facilitate its adoption., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The emission of volatile organic compounds (VOCs) from interior materials can significantly impact people's health and daily activities, necessitating effective management. In the construction of the interior built environment, plants serve as a suitable means to enhance air quality. They not only function as ecological living materials for air purification and VOCs removal but are also valued for their aesthetic appeal. However, often the emphasis in designing green infrastructure is placed more on the aesthetics of planting design rather than considering plants' ecological properties. This research examines the ability of 12 plant species used in the interior green wall design at Harvard University's Smith Center as a case study to decompose and absorb VOCs through experimental studies. By integrating ecological properties and key factors such as spatial and budget constraints into the design process, this research explores the potential of using an algorithmic model to select plant species capable of reducing interior VOC pollution in green wall design. The significance of this study lies in its contribution to indoor environmental health and environmental management practices through providing a potential plant selection model and suggesting a relevant workflow for interior planting design with the goal of controlling VOC emissions. By leveraging the knowledge gained from experiments on the VOC removal abilities of selected plant species, this study offers a valuable resource for practitioners seeking to create innovative indoor air cleaning and decontamination technologies., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

The capacity for indoor plants including green wall systems to remove specific volatile organic compounds (VOCs) is well documented in the literature; however under realistic settings, indoor occupants are exposed to a complex mixture of harmful compounds sourced from various emission sources. Gasoline vapour is one of the key sources of these emissions, with several studies demonstrating that indoor occupants in areas surrounding gasoline stations or with residentially attached garages are exposed to far higher concentrations of harmful VOCs. Here we assess the potential of a commercial small passive green wall system, commercially named the 'LivePicture Go' from Ambius P/L, Australia, to drawdown VOCs that comprise gasoline vapour, including total VOC (TVOC) removal and specific removal of individual speciated VOCs over time. An 8-h TVOC removal efficiency of 42.45% was achieved, along with the complete removal of eicosane, 1,2,3-trimethyl-benzene, and hexadecane. Further, the green wall also effectively reduced concentrations of a range of harmful benzene derivatives and other VOCs. These results demonstrate the potential of botanical systems to simultaneously remove a wide variety of VOCs, although future research is needed to improve upon and ensure efficiency of these systems over time and within practical applications., (© 2023. The Author(s).)

Many cities advocate retrofitting green roofs and green walls (GRGW) to create additional green areas, especially in cramped urban areas. Yet, worldwide, only a handful of studies have evaluated the public views towards the benefits and negative issues and promotion policies of this innovative greening option. To address this gap in the literature, we conducted a survey (N = 500) of residents' opinions towards GRGW in Tokyo, a city with mandatory installation of GRGW for almost two decades. Respondents mostly agreed with the contribution of GRGW to thermal comfort, air quality, and cityscape but weakly endorsed other potential benefits. High costs as well as mosquitoes and plant litter nuisances were the most recognized negative issues. Mandatory installation was the least preferred promotion policy. Instead, respondents expected installation on public buildings and provision of installation guidance. Respondents predominantly held a "moderate" view towards both the benefits and negative issues, showing indifferent attitudes towards GRGW. Income level and housing type shaped the overall perceptions, whereas age, sex, and current living environment influenced perceptions of individual aspects. Our findings signified a need for a bottom-up strategy to heighten public awareness for the advanced development of GRGW to complement and prime the top-down mandatory installation policy., (© 2022. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Nature-based greywater (GW) treatment and reuse in urban areas has become an up-and-coming option. A 14.4 m 2 green wall system called Total Value Wall (TVW) was installed at a terraced house in Gent (Belgium) for treating GW and reusing the effluent for toilet flushing. In a previous study, the TVW was loaded at 7 L.m -2 .d -1 and efficiently removed TSS (67%), COD (43%), BOD 5 (83%) and total coliforms (log 2), but a number of issues were reported related to nutrient leaching from the substrate, and the excessive retention time in the storage tanks. In this study results are reported from a follow-up study during which an adapted TVW was subjected to both higher hydraulic and pollutant loading rates in order to investigate the treatment capability of TVW. The design of the system, i.e. substrate contained in geotextile bags, did not sustain the higher hydraulic loading rates as excessive leakage occurred. Despite this, the higher pollutant loading rates still resulted in an acceptable effluent quality with 15 mg.L -1 TSS (90%), 85 mg.L -1 COD (82%), and 15 mg.L -1 BOD 5 (95%). Ammonium, E. coli and total coliforms were removed with removal rates of 98%, 63% (0.4 log units), and 36% (0.2 log units), respectively. Finally, a life cycle assessment (LCA) was performed for the TVW with and without treating GW to analyze the environmental burden. The LCA impacts showed that replacing tap water and chemical fertilizer by GW, and the reuse of effluent, have a positive impact. However, the energy use for pumping has a major impact and should be minimized by using an efficient pump and distribution system to reduce the overall footprint., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Despite the growing use of control measures, environmental tobacco smoke (ETS) remains a significant pollutant source in indoor air in many areas of the world. Current control methods for reducing ETS exposure are inadequate to protect public health in environments where cigarettes are smoked. An alternative solution is botanical biofiltration which has previously been shown to lower concentrations of volatile organic compounds (VOCs) and particulate matter (PM) from a range of polluted air streams. This study is the first to assess the potential of a botanical biofilter with the species Spathiphyllum wallisii (Peace Lily) for the removal of cigarette-derived VOCs and all size fractions of PM. Single pass removal efficiencies of 43.26% for total VOCs and 34.37% for total suspended particles were achieved. The botanical biofilter reduced the concentrations of a range of harmful ETS chemicals including nicotine, limonene, and toluene. Evaluation of the re-emission of ETS constituents filtered by the botanical biofilter revealed no particle resuspension or off gassing. The results demonstrate the potential of botanical biofilters to reduce public ETS exposure, although further research is needed to improve upon and ensure the efficiency of these systems for practical applications., (Copyright © 2022. Published by Elsevier Ltd.)

According to the European Research and Innovation Policy Agenda, nature-based solutions (NBSs) are key technologies to improve the sustainability of urban areas. Among NBSs, green walls have been recently studied for several applications, among the others the treatment of lowly polluted wastewater flows as greywater (GW, e.g. domestic wastewater excluding toilet flushes). This work is aimed at the evaluation of the influence of four additives (compost, biochar, granular activated carbon, polyacrylate) mixed with a base filter medium made of coconut fibre and perlite, on the performances of a green wall fed in batch mode with synthetic GW. The green wall was operated with a high hydraulic loading rate of GW (740.8 L/m 2 /day) in open-air winter conditions (3.5-15 °C measured for GW) between January and April. The performances of the green wall have been assessed though the monitoring every 1-2 weeks of physicochemical and biological parameters (pH, electric conductivity, total suspended solids, dissolved oxygen, BOD 5 and COD, nitrogen and phosporus compounds, chlorides and sulphates, anionic surfactants and E. coli). Removal performances were excellent for BOD 5 (>95%) and E.coli (>98%) for all additives; compared to the base medium, biochar was the best performing additive over the highest number of parameters, achieving removals equal to 51% for COD, 47% for TKN and nitric nitrogen and 71% for anionic surfactants. Compost also achieved high removal performances, but the frequent clogging events occurred during the monitoring period do not make its use recommendable. Granular activated carbon and the combination of biochar and polyacrylate performed better than the base medium, but only about the removal of nitric nitrogen. These results demonstrated that, in the considered experimental boundaries, biochar could improve the overall treatment performances of a green wall fed by GW and operated in challenging conditions., (Copyright © 2021 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Currently no sustainable, economical and scalable systems have been developed for the direct removal of roadside air pollutants at their source. Here we present a simple and effective air filtering technology: botanical biofiltration, and the first field assessment of three different botanical biofilter designs for the filtration of traffic associated air pollutants - NO 2 , O 3 and PM 2.5 - from roadside ambient air in Sydney, Australia. Over two six month research campaigns, we show that all of the tested systems filtered NO 2 , O 3 and PM 2.5 with average single pass removal efficiencies of up to 71.5%, 28.1% and 22.1% respectively. Clean air delivery rates of up to 121 m 3 /h, 50 m 3 /h and 40 m 3 /h per m 2 of active green wall biofilter were achieved for the three pollutants respectively, with pollutant removal efficiency positively correlated with their ambient concentrations. We propose that large scale field trials of this technology are warranted to promote sustainable urban development and improved public health outcomes., (Crown Copyright © 2021. Published by Elsevier B.V. All rights reserved.)

Internal green wall systems can be combined with building structures to bring positive impacts on people's quality of life in interior spaces. However, obtaining green wall systems to optimize the performances of these living walls still needs research works. This study was conducted to investigate the plant, and air-quality performance resulted from combining ornamental plants and growing media types in an internal green wall system. The growing media types (mixed based on volume percentage) included cocopeat, perlite, cocopeat + perlite (1v:1v) and cocopeat + perlite + vermicompost (1v:1v:1v). The ornamental species included Peperomia magnoliiaefolia, Kalanchoe blossfeldiana, Aptenia cordifolia, and Carpobrotus edulis. There were significant differences among the plant species and the growing media types for improvement of the plant growth and morphophysiological factors. Organic-rich growing media of vermicompost along with perlite and cocopeat, combined with Aptenia cordifolia as the species can be used to create a horticulturally sustainable internal green wall, and also improve the health index in the building interior environments., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Atmospheric particulate matters (PM) caused by urban traffic system put residents' health at serious risk. As a method of phytoremediation to mitigate this risk, roadside plants show significant potential to remove PM from the air. However, the relationship between traffic pressure, height, and leaves' capturing capacity is rarely reported. In this study, two common effective roadside plants ( Hedera helix, Taxus baccata ) with typical leaf shapes (broad and needle-leaved) were selected to explore the foliage capacity under high, middle and low traffic burden. A green wall covered by H. helix was tested to find out the relationship between heights and the amount of accumulated PM. Although the PM capturing capacity varied between different traffic pressures, needle-leaved species generally accumulated more PM than broad-leaved species. For PM 10 capturing, needle-leaved species showed higher capacity under all traffic pressures except under the low traffic pressure. For PM 2.5 capturing, needle-leaved species accumulated more PM only under the high traffic pressure. Needle-leaved plants were more sensitive to the change of traffic pressures, its PM capturing capacity changed notably between different traffic pressures because its leaf wax is more susceptible to be corroded. Leaf surface contact angle was slightly affected by the change of traffic pressure for broad-leaved species, but for needle-leaved species, it changed greatly. Leaf surface was the main zone for large PM capturing because the large PM was more likely to be stuck in grooves on the leaf surface, while leaf wax was mainly for fine PM absorption because PM with small sizes could adhere to the surface of the wax crystal. By comparing the amount of captured PM by leaf surface of urban roadside plants under different traffic pressures and height ranges, this study optimizes the benefits of roadside plants as traffic-related PM filter under different traffic conditions.

Indoor air quality has become a growing concern due to the increasing proportion of time people spend indoors, combined with reduced building ventilation rates resulting from an increasing awareness of building energy use. It has been well established that potted-plants can help to phytoremediate a diverse range of indoor air pollutants. In particular, a substantial body of literature has demonstrated the ability of the potted-plant system to remove volatile organic compounds (VOCs) from indoor air. These findings have largely originated from laboratory scale chamber experiments, with several studies drawing different conclusions regarding the primary VOC removal mechanism, and removal efficiencies. Advancements in indoor air phytoremediation technology, notably active botanical biofilters, can more effectively reduce the concentrations of multiple indoor air pollutants through the action of active airflow through a plant growing medium, along with vertically aligned plants which achieve a high leaf area density per unit of floor space. Despite variable system designs, systems available have clear potential to assist or replace existing mechanical ventilation systems for indoor air pollutant removal. Further research is needed to develop, test and confirm their effectiveness and safety before they can be functionally integrated in the broader built environment. The current article reviews the current state of active air phytoremediation technology, discusses the available botanical biofiltration systems, and identifies areas in need of development., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

The objectives of this effort was to study the effect of vertical (green wall) and horizontal (pergola) green structures on the microclimate conditions of the building surroundings and estimate the thermal perception and heat stress conditions near the two structures. The experimental data were used to validate the results simulated by the recent version (V4.0 preview III) of ENVI-met software which was used to simulate the effect of different design parameters of a pergola and a green façade on microclimate and heat stress conditions. Further aim is to use these results for better design of green structures. The microclimate measurements were carried out in real scale structures (hydroponic pergola and hydroponic green wall) at the Kostakii Campus of the Technological Education Institute of Epirus (Arta, Greece). The validation results showed a very good agreement between measured and simulated values of air temperature, with T air,sim  = 0.98 T air,meas in the Empty atrium and T air,sim  = 0.99 T air,meas in the Atrium with pergola, with a determination coefficient R 2 of 0.98 and 0.93, respectively. The model was used to predict the effects of green structures on air temperature (T air ), relative humidity (RH), and mean radiant temperature (T mrt ). The output values of these parameters were used as input data in the RayMan pro (V 2.1) model for estimating the physiologically equivalent temperature (PET) of different case scenarios. The average daytime value of simulated air temperature in the atrium for the case without and with pergola during three different days was 29.2 and 28.9 °C while the corresponding measured values were 29.7 and 29.2 °C. The results showed that compared to the case with no pergola in the atrium, covering 100% the atrium area with a planted pergola reduced at the hottest part of the day T mrt and PET values by 29.4 and 17.9 °C, respectively. Although the values of air temperature (measured and simulated) were not greatly affected by the presence of a green wall, the most important effect of green wall to the building wall is the reduction of solar radiation behind the green wall. This reduction leads to a significant reduction (about 8 °C) of building surface temperature behind the green wall and accordingly to a reduction of the energy load of the building.

The aim of the present study was to examine Air Pollution Tolerance Index (APTI) of some climber plant species to develop vertical gardens in Varanasi city which has characteristics of tall building and narrow roads. This condition results in street canyon like structure and hinders the vertical dispersal of air pollutants. We have selected 24 climber plant species which are commonly found in of Varanasi city. Chosen plants can be easily grown either in planter boxes or directly in the ground, with a vertical support they can climb on walls to form green walls or vertical garden. Air Pollution Tolerance Index (APTI) of the selected plant species was calculated and plants with higher APTI are recommended for the development of Vertical garden. Highest APTI was noted for Ipomoea palmata (25.39) followed by Aristolochia elegans (23.28), Thunbergia grandiflora (23.14), Quisqualis indica (22.42), and Clerodendrum splendens (22.36). However, lowest APTI value (8.75) was recorded for the species Hemidesmus indicus. Moreover, the linear regression analysis has revealed a high positive correlation between APTI and ascorbic acid content (R 2 =0.8837) and positive correlation between APTI and Chlorophyll content (R 2 =0.6687). On the basis of higher APTI values (greater than 17), nine species of climber plants viz. I. palmata, T. grandiflora, C. splendens, A. elegans, Q. indica, Petria volubilis, Antigonon leptopus, Cryptolepis buchuanni and Tinospora cordifolia have been recommended to develop vertical greenery systems in a compact tropical city., (Copyright © 2015 Elsevier Inc. All rights reserved.)