Search

This study aims to identify and evaluate the most common drugs associated with the risks of autoimmune hepatitis (AIH) using the FDA Adverse Event Reporting System (FAERS) database. Adverse drug events (ADEs) associated with drug-induced AIH (DI-AIH) were retrieved from the FAERS database (January 2004-June 2024). Disproportionality analysis was performed to identify drugs significantly linked to DI-AIH, and time-to-onset (TTO) analyses were conducted to evaluate the timing and risk profiles of DI-AIH adverse reactions. Our study identified 2,511 ADEs linked to autoimmune hepatitis. Disproportionality analysis identified 22 drugs significantly associated with AIH risk, including 4 antibiotics, 3 antivirals, 4 cardiovascular drugs, 5 antitumor agents, 2 immunomodulators, 2 nonsteroidal anti-inflammatory drugs, and 1 drug each from the respiratory and nervous system categories. The highest DI-AIH risks were observed with minocycline (ROR = 53.97), nitrofurantoin (ROR = 57.02), and doxycycline (ROR = 16.12). Antitumor drugs had the shortest median TTO (77.00 days), whereas cardiovascular drugs exhibited the longest (668.30 days). Through a comprehensive analysis of the FAERS database, our study identified drugs strongly associated with AIH. Preventing DI-AIH requires careful drug selection and monitoring. This study provides evidence-based insights into implicated drugs, aiming to optimize clinical management and mitigate risks., Competing Interests: Declarations. Competing interests: The authors declare no competing interests. Ethical statement: Since the FAERS database is publicly accessible and contains anonymized and de-identified patient records, this study does not require informed consent or ethical approval., (© 2025. The Author(s).)

The "Magic Methyl" effect has received tremendous interest in medicinal chemistry due to the significant pharmacological and physical modification of properties that have been observed upon introducing a methyl group, especially, a stereogenic methyl group into potential chiral drug candidates. The prevalence of stereogenic β-methyl ketone structural motifs in bioactive compounds and natural products has long motivated the development of enantioselective strategies toward their synthesis. Herein, we have rationally designed a Rh-catalyzed asymmetric monohydrogenation of readily-available β'-methylene conjugated enones with high efficiency and remarkable site-selectivity and enantioselectivity control for the practical construction of enantioenriched β'-methyl unsaturated enones that are difficult to access by other methods. Control experiments revealed that the conjugated C=C bond in β'-methylene conjugated enones plays a significant role in enhancing the reactivity of monohydrogenation. This methodology is applicable for the preparation of chiral β,β'-dimethyl ketones through consecutive double asymmetric hydrogenation of β,β'-dimethylene ketones. Detailed mechanistic investigation and DFT studies further provided strong support for a unique processive catalysis pathway for double asymmetric hydrogenation. The synthetic utilities have been demonstrated in the concise synthesis of several key intermediates for bioactive molecules, asymmetric total synthesis of natural products (S)-(+)-ar-Turmerone and (S)-(+)-dihydro-ar-Turmerone, and two C 2 -symmetric chiral spirocyclic diol frameworks., (© 2024 Wiley-VCH GmbH.)

Objective: To explore clinical effect of Zero-profile intervertebral fusion with cage-titanium plate in treating multilevel cervical spondylotic myelopathy., Methods: From January 2016 to January 2020, 107 patients with multisegmental cervical spondylotic myelopathy treated by surgery were retrospectively analyzed and divided into Hybrid group and control group according to different surgical methods. There were 54 patients in Hybrid group, including 42 males and 12 females, aged from 33 to 77 years old with an average of (57.3±9.5) years old;20 patients with C 3 -C 6 , 27 patients with C 4 -C 7 and 7 patients with C 3 -C 7 ;Zero-profile intervertebral fusion with cage-titanium plate internal fixation was performed. There were 53 patients in control group, including 34 males and 19 females;aged from 36 to 79 years old with an average of (57.8±8.9) years old;17 patients with C 3 -C 6 , 27 patients with C 4 -C 7 , and 9 patients with C 3 -C 7 ;titanium plate interbody fusion fixation was performed. Operation time, blood loss and complications between two groups were compared, visual analogue scale (VAS), Japanese Orthopedic Association (JOA) scores and neck disability index (NDI) were used to assess recovery of clinical symptoms;cervical lordosis (CL), cervical sagittal vertical axis (C-SVA), and T 1 slope (T 1 S) were measured and compared to evaluate cervical sagittal plane parameters., Results: All patients were followed up, Hybrid group was followed up for 24 to 64 months with an average of (31.7±18.4) months, and control group was followed up for 24 to 65 months with an average of (32.6±15.8) months. There was no significant difference in follow-up time between two groups ( P >0.05). Operation time and blood loss in Hybrid group were less than those in control group ( P <0.05). VAS, JOA score and NDI were significantly improved between two groups at the lastest follow-up ( P <0.05). There were no significant difference in VAS, JOA and NDI scores between two groups before and after operation ( P >0.05). CL in both two groups at 3 months and the latest follow-up after operation were significantly improved than those before operation ( P <0.05), there were no significant difference between two groups in T1S and C-SVA before and after operation ( P >0.05). Postoperative dysphagia occurred in 2 patients in Hybrid group and 9 patients in control group, and had statistically difference in the incidence of dysphagia between two groups ( χ 2 =5.112, P =0.024). During the follow-up, there were no complications such as loosening, displacement or fracture of internal fixation between two groups., Conclusion: Compared with titanium plate interbody fusion, Zero-profile intervertebral fusion combined with cage-titanium plate for the treatment of multilevel cervical spondylotic myelopathy could shorten surgical time and blood loss, reduce surgical trauma and postoperative swallowing difficulties, and is conducive to early and rapid recovery.

High-efficiency dye desalination is crucial in the textile industry, considering its importance for human health, safe aquatic ecological systems, and resource recovery. In order to solve the problem of effective separation of univalent salt and ionic dye under the condition of high salt, ionic hyperbranched poly(amido-amine) (HBPs) were synthesized based on a simple and scalable one-step polycondensation method and then incorporated into the polyamide (PA) selective layers to construct charged nanochannels through interfacial polymerization (IP) on the surface of a polyvinyl chloride ultrafiltration (PVC-UF) hollow fiber membrane. Both the internal nanopores of HBPs (internal nanochannels) and the interfacial voids between HBPs and the PA matrix (external nanochannels) can be regarded as a fast water molecule transport pathway, while the terminal ionic groups of ionic HBPs endow the nanochannels with charge characteristics for improving ionic dye/salt selectivities. The permeate fluxes and dye/salt selectivities of HBP-TAC/PIP (57.3 L m -2 h -1 and rhodamine B (RB)/NaCl selectivity of 224.0) and HBP-PS/PIP (63.7 L m -2 h -1 and lemon yellow (LY)/NaCl selectivity of 664.0) membranes under 0.4 MPa operation pressure are much higher than PIP-only and HBP-NH 2 /PIP membranes. At the same time, this project also studied the membrane desalination process in a simulated high-salinity dye/salt mixture system to provide a theoretical basis and technical support for the actual dye desalination process.

Highly diastereo-/enantioselective assembly of 2,3-fused indolizine derivatives could be easily available through a cascade allylation/Friedel-Crafts type reaction enabled by a synergistic Cu/Ir catalysis. This designed protocol provides an unprecedented and facile route to enantioenriched indolizines bearing three stereogenic centers in moderate to high yields with excellent stereoselective control, which also featured broad substrate generality. Remarkably, four stereoisomers of the 2,3-fused indolizine products could be efficiently constructed in a predictable manner through the pairwise combination of copper and iridium catalysts. The synthetic utility of this method was readily elaborated by a gram-scale reaction, and synthetic transformations to other important chiral indolizine derivatives. Quantum mechanical explorations constructed a plausible synergetic catalytic cycle, revealed the origins of stereodivergence, and rationalized the protonation-stimulated stereoselective Friedel-Crafts type cyclization to form the indolizine products., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Objective: Although pedicle screws are widely used to reconstruct the stability of the spine, screw loosening is a common complication after spine surgery. The main objective of this study was to investigate whether the application of the hollow lateral hole structure had the potential to improve the stability of the pedicle screw by comparing the biomechanical properties of the novel lateral hole pedicle screws (LHPSs) with those of the solid pedicle screws (SPSs) in beagle dogs., Methods: The cancellous bone of the distal femur, proximal femur, distal tibia, and proximal tibia were chosen as implantation sites in beagle dogs. In each of 12 dogs, four LHPSs, and four SPSs were implanted into both lower limbs. At 1, 2, and 3 months after surgery, four dogs were randomly sampled and sacrificed. The LHPS group and SPS group were subdivided into four subgroups according to the length of their duration of implantation (0, 1, 2, 3 months). The biomechanical properties of both pedicle screws were evaluated by pull-out and the cyclic bending tests., Results: The results of the study showed that no significant difference was found between LHPSs (276.62 ± 50.11 N) and SPSs (282.47 ± 42.98 N) in pull-out tests at time 0 (P > 0.05). At the same time point after implantations, LHPSs exhibited significantly higher maximal pullout strength than SPSs (month 1: 360.51 ± 25.63 vs 325.87 ± 28.11 N; month 2: 416.59 ± 23.78 vs 362.12 ± 29.27 N; month 3: 447.05 ± 38.26 vs 376.63 ± 32.36 N) (P < 0.05). Moreover, compared with SPSs, LHPSs withstood more loading cycles (month 2: 592 ± 21 vs 534 ± 48 times; month 3: 596 ± 10 vs 543 ± 59 times), and exhibiting less displacement before loosening at month 2 (1.70 ± 0.17 vs 1.96 ± 0.10 mm) and 3 (1.69 ± 0.19 vs 1.92 ± 0.14 mm) (P < 0.05), but no significant difference in time 0 and month 1 (P > 0.05)., Conclusions: The pedicle screw with the hollow lateral hole structure could allow bone to grow into the inner architecture, which improved biomechanical properties by extending the contact area between screw and bone tissue after implantation into the cancellous bone. It indicated that LHPS could reduce loosening of the pedicle screws in long term after surgery., (© 2022 The Authors. Orthopaedic Surgery published by Tianjin Hospital and John Wiley & Sons Australia, Ltd.)

Objective: To explore the clinical characteristics and the short-term efficacy of posterior operation for traumatic lumbar spondylolisthesis., Methods: All 28 patients (between January 2013 and June 2018) were treated with lumbar pedicle screw fixation combined with posterior intervertebral fusion. The clinical data and imaging materials of these patients were retrospectively analyzed., Results: The mean follow-up period was 24.3 months (12-36 months). The average VAS score and JOA score were significantly improved after surgery, and the difference was statistically significant (P<0.05).The last follow-up X-ray showed that 16 cases were degree 0 and 12 cases were degree I according to Meyerding grading, which were statistically improved compared with preoperative. Postoperative CT indicated lumbar internal fixation well, and the lumbar fusion rate was 100%. The Frankel grading of neurological function was significantly improved compared with preoperative., Conclusion: Acute traumatic lumbar spondylolisthesis is caused by severe trauma and mostly occurred at L4/L5 and L5/S1 level. Early posterior reduction, decompression and intervertebral fusion can achieve satisfactory clinical and radiological outcome., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have approved to influence the work reported in this paper., (Copyright © 2021. Published by Elsevier Ltd.)

In this study, positively charged monomers were grafted onto negatively charged membranes via UV radiation to improve the antifouling/antibiofouling properties of the polymeric membrane and the stability of the modification layer. The surface properties, morphologies, antifouling and antibiofouling properties, and stability of the modified membranes were systematically characterized. Results indicated that the introduction of [2-(methacryloyloxy) ethyl] trimethylammonium chloride (MTAC) monomers onto polyethersulfone (PES)/sulfonated polyethersulfone (SPES) membranes effectively increased the surface hydrophilicity. Meanwhile, the surfaces were neutralized with ~0 mV zeta potential in pH 3-10. Moreover, the formation of a polyampholytic copolymer and the antibacterial ability of MTAC considerably improved the antibiofouling properties of the modified membranes. The MTAC-grafted PES/SPES membranes showed excellent antifouling/antibiofouling properties during the treatment of various types of wastewater, including bovine serum albumin solution, oil/water emulsion, and bacterial suspension. Therefore, this study provides a simple and effective method of constructing stable and antifouling membranes for sustainable water treatment., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier Inc. All rights reserved.)

Purpose: To analyze the opening of mid-palatal suture, transverse changes in dental and dentoalveolar measurements and shift of midfacial bony structures induced by maxillary skeletal expansion (MSE) with cone-beam CT (CBCT), and to evaluate the effect of maxillary skeletal expansion and its influence on adjacent bony structures in adults., Methods: The study sample consisted of 12 adult patients with maxillary transverse deficiency (4 males, 8 females) at a mean age of (21.17±4.13) years old. All patients were treated with MSE. After treatment, the posterior crossbite was corrected, and the width of the maxillary arch was achieved the optimal width. Pre- and post-treatment CBCT exams were taken before and after MSE treatment. Multiplanar coronal and axial slices obtained from CBCT images were used to measure the changes in transverse widths, angular changes and tooth inclination with Dolphin Imaging 11.9. SPSS 26.0 software package was used for statistical analysis., Results: After MSE treatment, the anterior nasal spine width increased by (2.38±1.01) mm, posterior nasal spine width increased by (2.25±1.08) mm (P<0.01). The inter-crown and inter-apex distance at the first molar increased by (5.56±1.38) mm and (4.14±1.29) mm, respectively (P<0.01). No significant difference was seen in terms of tooth inclination of the first molar(P>0.05). Pterygoid process angle, pterygoid process width, anterior inter-maxillary distance, upper and lower inter-zygomatic distance were significantly larger after treatment (P<0.01), while the inter-temporal distance and bilateral zygomaticomaxillary angle remained unchanged(P>0.05)., Conclusions: MSE has a favorable effect in adult patients with parallel skeletal expansion of the mid-palatal suture achieved after expansion. The teeth present with certain buccal inclination but show no significant movement relative to the alveolar bone. The midfacial bony structures also shift in three-dimensional under the effect of the expansion force.

Separating low/high-valent ions with sub-nanometer sizes is a crucial yet challenging task in various areas ( e . g ., within environmental, healthcare, chemical, and energy engineering). Satisfying high separation precision requires membranes with exceptionally high selectivity. One way to realize this is constructing well-designed ion-selective nanochannels in pressure-driven membranes where the separation mechanism relies on combined steric, dielectric exclusion, and Donnan effects. To this aim, charged nanochannels in polyamide (PA) membranes are created by incorporating ionic polyamidoamine (PAMAM) dendrimers via interfacial polymerization. Both sub-10 nm sizes of the ionic PAMAM dendrimer molecules and their gradient distributions in the PA nanofilms contribute to the successful formation of defect-free PA nanofilms, containing both internal (intramolecular voids) and external (interfacial voids between the ionic PAMAM dendrimers and the PA matrix) nanochannels for fast transport of water molecules. The external nanochannels with tunable ionizable groups endow the PA membranes with both high low/high-valent co-ion selectivity and chemical cleaning tolerance, while the ion sieving/transport mechanism was analyzed by employing the Donnan steric pore model with dielectric exclusion.

To overcome the organic-/bio- fouling of the membrane, a dual-functional ultrafiltration membrane containing quaternary ammonium and zwitterionic polymers via quaternization and surface radical polymerization was designed, and its antifouling and antibacterial behavior was studied. In this work, poly(vinylidene fluoride)/poly(methyl methacrylate-co-dimethylamino-2-ethyl methacrylate) (PVDF/P(MMA-co-DMAEMA)) blend membrane was quaternized by p-chloromethyl styrene (p-CMS), and the double bonds were introduced onto the membrane surface, which further participated in the polymerization of zwitterionic monomers on the membrane surface. The results indicated that the resultant membrane exhibited obviously improved hydrophilicity and weak positive charge (isoelectric point, 7.49). The membrane presented higher flux recovery ratio and lower protein adhesion compared with the pure PVDF membrane. Meanwhile, the membrane showed high-efficiency broad-spectrum antibacterial performance, that is, the bacteria killing efficiency of S. aureus and E. coli reached 98.2% and 97.0%, respectively. Moreover, the membrane effectively inhibited bacterial adhesion, which is important for the long-term antibacterial properties of membrane. This antifouling and antibacterial PVDF membrane may have potential in the long-term filtration process, especially when dealing with microbiologically contaminated water., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Inc. All rights reserved.)

As the national key discipline and the initiator of oral and maxillofacial deformity group, the Department of Oral and Maxillofacial Surgery persisted in teaching, designed a novel teaching form combining theoretical knowledge and online software practice according to the characteristics of our discipline and carried out "cloud training" via the National Oral Telemedicine Education Platform. Ten lecturers, 325 theoretical students and 50 practical students were investigated by questionnaire in the present study with questions focusing on the geographical distribution and composition of personnel, etc. The results showed that the online course covered a wide range of students and achieved high acceptance and satisfaction rate. The first online software operation course was conducted in an orderly manner, with timely interaction between teachers and students. The students were able to master the design process skillfully. This "cloud training" has achieved good results, but there are still a series of problems that have yet to be resolved, such as network stalls and protection of intellectual property rights. Under the new form, the exploration and analysis of the new mode of online telemedicine specialist education will provide some practical reference for the National Clinical Research Center for Oral Diseases to carry out online telemedicine teaching in the future.

To improve the permeability and antifouling properties of polyvinyl chloride (PVC) ultrafiltration (UF) membrane, amphiphilic sulfonated polysulfone (SPSF) was introduced into PVC matrix. Three types of PVC/SPSF blend membranes containing different SPSF with the sulfonation degree (SD) of 20%, 30%, and 50% were fabricated by non-solvent induced phase separation (NIPS) process. The excellent compatibility between PVC and SPSF was confirmed by differential scanning calorimetry (DSC). Surface chemical compositions, morphology, roughness, charge, hydrophilicity, permeability and antifouling properties of the pristine PVC membrane and the PVC/SPSF blend membranes were systematically compared and characterized. Due to the improved hydrophilicity and endowed negative charge, the blend membrane showed high water permeability (i.e. 880 L m -2 h -1 bar -1 ), high bovine serum albumin (BSA) rejection (i.e. 95.7%), and high flux recovery ratio (i.e. 96%), which outperformed ever reported and commercialized PVC membranes. Furthermore, the permeability and rejection properties of PVC/SPSF UF membranes were maintained after soaking in acidic and alkaline solutions for 30 days, indicating their outstanding acid and alkali tolerance. Therefore, SPSF was expected as a potential versatile modifier for fabricating high performance UF membranes., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Inc. All rights reserved.)

Objective: To characterize the epidermal growth factor receptor ( EGFR ) gene in Schistosoma japonicum ( SjEGFR gene) and investigate the role of the EGFR gene in regulating the growth, reproductive system, maturation and fecundity of S. japonicum ., Methods: Rapid amplification of cDNA ends (RACE) was performed to obtain the full length of the SjEGFR gene, and the SjEGFR gene expression was quantified in different developmental stages of S. japonicum using a quantitative real-time PCR (qPCR) assay. The tissue localization of the SjEGFR gene was detected in 22-day parasite using whole-mount in situ hybridization (WISH). Following RNA interference (RNAi)-induced knockdown of the SjEGFR gene, the worm length, pairing rate and worm burden of S . japonicum were measured, and the worm morphology was observed using optical microscopy and confocal microscopy., Results: The SjEGFR gene was identified with a conserved tyrosine-kinase active site, and the SjEGFR gene expression was detected at various developmental stages in male and female parasites. WISH showed that the transcript of the SjEGFR gene was localized on the tegument and in the digestive organs of S. japonicum . RNAi-induced SjEGFR knockdown resulted in marked suppression of the worm growth, smaller size of male testicles that contained more immature spermatocytes, and apparent impairment of ovary and vitelline gland development. In addition, no eggs were found in the uterus of SjEGFR knocked-down female parasites, indicating the interruption of egg production., Conclusions: Inhibition of SjEGFR expression may remarkably suppress the growth and maturation of S. japonicum , and interrupt the egg production.

To enhance hexavalent chromium (Cr(VI)) removal performance under acidic conditions, the nanofiltration (NF) membrane with enhanced negative charge was fabricated via introducing 2, 5-diaminobenzenesulfonic acid (DABSA) into polyamide layer. The control membrane (NF-P) was directly prepared from piperazine and 1, 3, 5-benzenetricarbonyltrichloride. Surface chemical compositions, morphology, surface charge, pore size, permeability and pH-dependent separation performance of the fabricated membranes were characterized. The membranes showed the similar water permeance (∼11.5 L m -2  h -1  bar -1 ) and Na 2 SO 4 rejections (∼98%) under neutral environments. The DABSA introduced NF membrane (NF-PD) was negatively charged in the pH range of 2.5-11, while the isoelectric point for NF-P was ∼pH 4.0. Cr(VI) removal ability was then evaluated under various concentrations and pH environments. The results indicated that NF-PD showed the better Cr(VI) rejection performance in all tested conditions than NF-P, especially under acidic environments (e.g., pH 4 and pH 5). Moreover, there was a fluctuation of the rejection with the increase of Cr(VI) concentration under acidic environments, which was mainly caused by the formation of Cr 2 O 7 2- species. The harmful Cr(VI) was efficiently removed by the NF membrane with enhanced negative charge under acidic environments, which indicated the wider application range of the NF membrane., (Copyright © 2019 Elsevier Inc. All rights reserved.)

The development of highly efficient membranes technology using low-pressure driven filtration process, is one of the principal challenges in the wastewater treatment field, especially those aimed at the removal of trace heavy metals. In this work, a novel positively charged tight ultrafiltration (PCTUF) membrane was developed to remove heavy metal cations (Mn 2+ , Co 2+ , Ni 2+ , Zn 2+ and Cd 2+ ) from contaminated waters via electrostatic repulsion mechanism. The PCTUF membrane was fabricated from a new polymer with poly (vinyl chloride co dimethylaminoethyl methacrylate), P (VC-co-DMA) via a nonsolvent induce phase separation (NIPS) process and following facile surface quaternization. The quaternization conditions, the pore structures and chemical properties of the membranes were investigated in detail. The optimally quaternized membrane possessed a positively charged surface and 3.27 nm charged channel with the water permeability of 84 L m -2  h -1  bar -1 . The rejections of heavy metal cations surpassed 95% for feed solutions containing 10 ppm heavy metal. Moreover, the influences of feed concentrations and the operating condition with pressure and pH on the membrane performances were also investigated. The results revealed that the prepared PCTUF membrane with its high perm-selectivity performance provides a worthy reference for highly efficient removal of heavy metal cations., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Background: There are various posterior fixations utilized with transforaminal lumbar interbody fusion (TLIF). Previous studies have focused on the comparison of two fixation techniques., Materials and Methods: Sixty five patients with single-level lumbar disease were included in this retrospective study. Group A was treated by TLIF with bilateral pedicle screw (BPS), Group B treated by TLIF with unilateral pedicle screw (UPS), and Group C treated by TLIF with UPS plus contralateral translaminar facet screw (UPSFS). The operative time, blood loss, Oswestry disability index (ODI), Japanese Orthopaedic Association Scores (JOA), and visual analog scores (VAS) were recorded. Radiographic examination was used to assess fusion rates and incidence of screw failure., Results: The blood loss and operative times were 188.69 ± 37.69 ml and 132.96.5 ± 8.69 min in BPS group, 117.27 ± 27.11 ml and 99.32 ± 12.94 min in UPS group, and 121.50 ± 22.54 ml and 112.55 ± 9.42 min in UPSFS group; UPS and UPSFS were better than BPS ( P < 0.05). The mean followup time was 38.2 months. Fusion rates were - BPS group: 95.6%, UPS group: 90%, UPSFS: 95% ( P > 0.05). Screw and/or rod failures were found in three groups (BPS group: 1, UPS group: 2 and UPSFS: 1, P > 0.05). The average postoperative VAS, ODI, and JOA scores of BPS, UPS, and UPSFS were improved significantly in each group compared to preoperative scores ( P < 0.05); there were no significant differences between any two groups at each followup time point ( P > 0.05)., Conclusion: UPSFS with TLIF is a viable treatment option that provides satisfactory clinical results; the clinical outcome and the complication rate were comparable to BPS. In addition, the invasive of UPSFS cases was comparable to UPS and better than BPS cases. For UPS, it could be used in suitable patients., Competing Interests: There are no conflicts of interest.

Objective: To evaluate the clinical and radiological results of patients with thoracic and lumbar fracture and dislocation treated by posterior transforaminal decompression and interbody fusion., Methods: From June 2010 to June 2017, posterior transforaminal decompression, interbody fusion combined with pedicle screw fixation were performed in 21 patients with thoracic and lumbar fracture and dislocation. Their clinical and radiological data were collected and retrospectively analyzed, including 15 males and 6 females, aged from 25 to 58 years with an average of 45 years old. According to the criterion of American Spinal Injury(ASIA), preoperative neurological function was graded A in 3 cases, B in 7 cases, C in 6 cases, D in 4 cases and E in 1 case. Operative time and intraoperative blood loss and correlative complications were recorded. And VAS score, ODI and Cobb angle were evaluated before and after surgery. The improvement of neurological function was also analyzed at the final follow-up. Intervertebral bony fusion was observed during the follow-up by CT three-dimensional reconstruction., Results: The operative time was 150 to 240 min with an average of (192±47) min. The intraoperative blood loss was 380 to 750 ml with an average of(603±120) ml. Dura sac tearing and cerebral fluid leakage occurred in 3 cases and were repaired during operation; superficial wound infection occurred in 1 case, and got healing after dressing change. The postoperative follow-up duration was 24 to 45 months with an average of(37.0±9.5) months. VAS score was improved from preoperative 8.9±0.4 to immediately postoperative 4.2±1.3( P <0.05). At the final follow-up, VAS score decreased further to 3.6±0.8. ODI was decreased from preoperative (95.30±3.52)% to (32.51±6.30)% at the final follow-up ( P <0.05). Cobb angle was corrected from preoperative (21.2±8.8)° to immediately postoperative(2.3±3.1)° ( P <0.05). At the final follow-up, Cobb angle was (3.2±2.5)°, showing no significant difference with immediately postoperative value. The neurological function was grade A in 3 cases, B in 3 cases, C in 5 cases, D in 6 cases and E in 4 cases at the final follow-up. All the patients got solid intervertebral bone fusion in 8 to 13 months after operation, with an average fusion time of (10.3±2.5) months., Conclusions: For the patients with thoracic and lumbar fracture and dislocation mainly involving intervertebral disc and endplate plane, posterior transforaminal decompression and interbody fusion not only is less invasive, but also can effectively reconstruct spinal three column and obtain good biomechanical stability. And, it is beneficial for the good recovery of neurological function., Competing Interests: The authors of this article and the planning committee members and staff have no relevant financial relationships with commercial interests to disclose., (Copyright© 2019 by the China Journal of Orthopaedics and Traumatology Press.)

A cross 1,3-dipolar cycloaddition of two different ylides between C,N-cyclic azomethine imines with an in situ-generated nonstabilized azomethine ylide from an N-benzyl precursor was realized. The reactions afforded a clean and facile access to diverse fused tricyclic 1,2,4-hexahydrotriazines in high yields (up to 96%). The chemical structures of the typical compounds were confirmed by X-ray single-crystal structure analysis.

Objectives: To analyze the biomechanical stability of four kinds of internal fixation for the type Ⅰ Hangman fracture, type Ⅱ odontoid fracture and the C(2/3) disc injury by finite element (FE) analysis. Methods: Thin-section spiral computed tomography (0.5 mm) was performed on C(1) to C(3) region of cervical vertebra in healthy male volunteers.A three-dimensional hexahedral FE model of upper cervical spine was established by software (Mimics, GEOMAGICS, Pro/E and Ansys). Then the weakening of the strength of grid was performed to simulate the FE model of the type Ⅰ Hangman fracture, type Ⅱ odontoid fracture and the C(2/3) disc injury (FE/Fracture), the four internal fixation models: anterior cervical plate+ odontoid screw+ cage (FE/ACP+ OS+ cage), affixing rods from pedicle screws in C(2) to lateral mass screws in C(3)+ odontoid screw + cage (FE/C(2)PS+ C(3)LMS+ OS+ cage), affixing rods from pedicle screws in C(1) to pedicle screws in C(2) and lateral mass screws in C(3) (FE/C(1)PS+ C(2)PS+ C(3)LMS), anterior odontoid screw plate fixation system (FE/AOSP) were simulated on the FE/Fracture model.Flexion, extension, lateral bending and axial rotation were imposed on the FE/Intact, FE/Fracture and the four fixation models respectively. Results: The intact model of upper cervical spine (C(1)-C(3)) was established successfully, consisting of 259 641 nodes and 403 674 units.There was no significant difference among the FE/ACP+ OS+ cage, the FE/ C(2)PS+ C(3)LMS+ OS+ cage and the FE/AOSP of ROMC(1/2).During flexion, extension, left axial rotation and right axial rotation of ROMC(2)-C(3), the FE/AOSP decreased 70.7%, 74.4%, 38.9%, 41.1% respectively compared with the FE/C(1)PS+ C(2)PS+ C(3)LMS.The ROMC(2)-C(3) during flexion, extension, left lateral bending, right lateral bending, left axial rotation and right axial rotation in the FE/AOSP decreased for 82.2%, 82.8%, 73.2%, 64.8%, 72.2%, 81.5% respectively when compared with those in FE/ACP+ OS+ cage.The ROMC(2)-C(3) during flexion, extension, left lateral bending, right lateral bending, left axial rotation and right axial rotation in the FE/AOSP decreased 88.2%, 81.2%, 47.6%, 41.2%, 38.9%, 39.0% respectively when compared with those in FE/C(2)PS+ C(3)LMS+ OS+ cage.The stress concentrated on the connection between plate and screw in the FE/ACP+ OS+ cage, the FE/C(2)PS+ C(3)LMS+ OS+ cage and the FE/C(1)PS+ C(2)PS+ C(3)LMS, while it distributed evenly in the FE/AOSP. Conclusion: Anterior odontoid screw plate fixation system can be used to treat the type Ⅰ Hangman fracture, type Ⅱ odontoid fracture, and the C(2/3) disc injury and can reserve the function of atlanto-axial joint.

Microplastics are emerging pollutants that have recently aroused considerable concern but most toxicological studies have focused on marine biota, with little investigation of the influence of microplastics on terrestrial ecosystems. Here, we fed the soil oligochaete Enchytraeus crypticus with oatmeal containing 0, 0.025, 0.5, and 10% (dry weight basis) nano-polystyrene (0.05-0.1 μm particle size) to elucidate the impact of microplastics on the growth and gut microbiome of Enchytraeus crypticus. We observed a significant reduction of weight in the animals fed 10% polystyrene and an increase in the reproduction of those fed 0.025%. More importantly, using 16S rRNA amplification and high-throughput sequencing we found a significant shift in the microbiome of those fed 10% microplastics with significant decreases in the relative abundance of the families Rhizobiaceae, Xanthobacteraceae and Isosphaeraceae. These families contain key microbes that contribute to nitrogen cycling and organic matter decomposition., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Two new prenylflavonoids, morusalbols A and B (1 and 2), were isolated from the branches and leaves of Morus alba, together with three known compounds, kuwanon C (3), morusin (4), morusinol (5). The structures of these two prenylflavonoids were elucidated by extensive analyzes of the spectroscopic data.

The toxic metalloid arsenic has been environmentally ubiquitous since life first arose nearly four billion years ago and presents a challenge for the survival of all living organisms. Its bioavailability has varied dramatically over the history of life on Earth. As life spread, biogeochemical and climate changes cyclically increased and decreased bioavailable arsenic. To elucidate the history of arsenic adaptation across the tree of life, we reconstructed the phylogeny of the arsM gene that encodes the As(III) S-adenosylmethionine (SAM) methyltransferase. Our results suggest that life successfully moved into arsenic-rich environments in the late Archean Eon and Proterozoic Eon, respectively, by the spread of arsM genes. The arsM genes of bacterial origin have been transferred to other kingdoms of life on at least six occasions, and the resulting domesticated arsM genes promoted adaptation to environmental arsenic. These results allow us to peer into the history of arsenic adaptation of life on our planet and imply that dissemination of genes encoding diverse adaptive functions to toxic chemicals permit adaptation to changes in concentrations of environmental toxins over evolutionary history.

Two new compounds, 19-hydroxy-melodinine K (1) and melodiside (2), and 25 known compounds were isolated from leaves and twigs of Melodinus suaveolens. Their structures were elucidated based on 1- and 2-D NMR, FTIR, UV and MS spectroscopic data. 19-hydroxy-melodinine K showed cytotoxic activity against MDA-MB-231 breast, BCG-823 gastric, SW480 colon and Hela cancer cells.

We demonstrate the preparation and properties of poly(vinylidene fluoride) (PVDF) filtration membranes modified via surface zwitterionicalization mediated by reactive core-shell silica nanoparticles (SiO2 NPs). The organic/inorganic hybrid SiO2 NPs grafted with poly(methyl meth acrylate)-block-poly(2-dimethylaminoethyl methacrylate) copolymer (PMMA-b-PDMAEMA) shell were prepared by surface-initiated reversible addition fragmentation chain transfer (SI-RAFT) polymerization and then used as a membrane-making additive of PVDF membranes. The PDMAEMA exposed on membrane surface and pore walls were quaternized into zwitterionic poly(sulfobetaine methacrylate) (PSBMA) using 1,3-propane sultone (1,3-PS) as the quaternization agent. The membrane surface chemistry and morphology were analyzed by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM), respectively. The hydrophilicity, permeability and antifouling ability of the investigated membranes were evaluated in detail. It was found that the PSBMA chains brought highly-hydrophilic and strong fouling resistant characteristics to PVDF membranes due to the powerful hydration of zwitterionic surface. The SiO2 cores and PMMA chains in the hybrid NPs play a role of anchors for the linking of PSBMA chains to membrane surface. Compared to the traditional strategies for membrane hydrophilic modification, the developed method in this work combined the advantages of both blending and surface reaction., (Copyright © 2016 Elsevier Inc. All rights reserved.)

Objective: To identify the role of YAP in cisplatin resistance in human ovarian cancer cells and in the regulation of autophagy in these cancer cells., Materials and Methods: The cisplatin-sensitive OV2008 parental cell line and its cisplatin-resistant variant C13K were cultured. RNA interference was used to knock down the YAP gene. Accumulation of GFP-LC3 puncta was performed by fluorescence microscopy. The formation of autophagosomes was observed by transmission electron microscopy. Drug sensitivity was examined using CCK-8 assay, while apoptosis, the level of intracellular rhodamine 123 and lysosomal acidification were analyzed by fluorescence-activated cell sorting. Acid phosphatase activity was measured using an acid phosphatase-assay kit. Real-time polymerase chain reaction, Western blotting, and immunofluorescence detection were used to detect the protein and messenger RNA expression of YAP, YAP target genes, CCND1, cleaved PARP, and caspase 3, Atg-3 and -5, and the LC3B protein., Results: YAP signaling may regulate cisplatin resistance in ovarian cancer cells by augmenting cellular autophagic flux. After knockdown of YAP-sensitized C13K cells to cisplatin by inducing a decrease in autophagy, YAP led to an increase in autophagy via enhancement of autolysosome degradation., Conclusion: YAP-mediated autophagy may play a protective role in cisplatin-resistant human ovarian cancer cells. Therefore, YAP-mediated autophagy should be explored as a new target for enhancing the efficacy of cisplatin against ovarian cancer and other types of malignancies.

Hydrophilic polymers have garnered much attention due to their critical roles in various applications such as molecular separation membranes, bio-interfaces, and surface engineering. However, a long-standing problem is that their mechanical properties usually deteriorate at high relative humidity (RH). Through the simultaneous incorporation of functionalized carbon nanotubes and copper ions (Cu(2+)), this study introduces a facile method to fabricate high strength polyelectrolyte complex nanohybrid membranes resistant to high RH (90%). For example, the tensile strength of the nanohybrid membranes is 55 MPa at 90% RH (80% of the original value at 30% RH). These results are explained by copper ions depressing the swelling degree of the membrane, and functionalized carbon nanotubes promoting stress transfer between the polymer matrix and them. The nanohybrid membranes are efficient in separating water/alcohol mixtures containing relatively high water content (up to 30 wt%), whereas common hydrophilic polymer membranes usually suffer from excessive swelling under this condition.

Carboxymethyl cellulose (CMC)-modified silica nanocomposites were prepared via in situ incorporation of modified silica during the ionic complexation between CMC and poly(2-methacryloyloxy ethyl trimethylammonium chloride) (PDMC). Ionic bonds were introduced between the poly(2-acrylamido-2-methylproanesulfonic acid) modified silica (SiO2-PAMPS) and the polyelectrolyte complex (PEC) matrix. The PEC nanocomposites (PECNs) and their membranes (PECNMs) were characterized with Fourier transform-infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and tensile testing. PECNM containing 5 wt.% SiO2-PAMPS showed a tensile strength of 68 MPa and elongation at break of 7.1%, which were 1.9 and 2.6 times as high as those of pristine PEC membranes, respectively. Moreover, the pervaporation performance of as-prepared PECNMs was evaluated with dehydration of 10 wt.% aqueous isopropanol mixtures, and the PECNMs exhibited a flux of 2,400 gm(-2)h(-1) with a high separation factor of 4491 at 70°C., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

FHL1C is a LIM domain protein that has been implied in transcription regulation through interacting with other proteins, such as RBP-J, the critical transcription factor of the Notch signaling pathway. The LIM domain is a protein-protein interaction interface, suggesting that FHL1C could bind other proteins to enable its functions. In order to explore the interacting proteins with FHL1C, in this study we screened FHL1C-interacting proteins by using immunoprecipitation and mass spectrometric analysis. ZO-1, a member of the Zonula occludens proteins that constitute tight junctions, was sorted out as one candidate by using these techniques. Furthermore, we confirmed the interaction between FHL1C and ZO-1 in cells by using the mammalian two-hybrid assay and the co-immunoprecipitation assay, and verified that ZO-1 could interact with FHL1C through the PDZ domains of ZO-1. Moreover, with immunofluorescence staining, we found that FHL1C could induce ZO-1 translocating into nucleus. With a breast adenocarcinoma cell line MCF7, we showed that the interaction between FHL1C and ZO-1 could contribute to the epithelial-mesenchymal transition (EMT). Taken together, our study might provide new insight into the function of FHL1C on the regulation of EMT in cancer cells., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Here we report the fabrication of a novel heparinized copper hydroxide (Cu(OH)2) nanofiberous membrane with satisfying hemocompatibility and antibacterial properties. The positively charged Cu(OH)2 nanofibers were prepared in a weakly alkaline copper nitrate solution in the presence of 2-aminoethanol. A heparin (Hep) solution was then added dropwise into the solution of nanofibers to immobilize negatively charged heparin onto the Cu(OH)2 nanofibers by electrostatic interaction. A composite Hep@Cu(OH)2 nanofiberous membrane was prepared by filtration and deposition of the heparinized nanofibers onto a polysulfone (PSF) porous membrane. Chemical composition analysis of membrane surface using X-ray photoelectron spectroscopy (XPS) confirmed the successful immobilization of heparin on Cu(OH)2 nanofibers. The amount of immobilized heparin on nanofiberous membrane was determined by a colorimetric assay of toluidine blue dye and the results showed that the amount of immobilized heparin was strongly dependent on the heparin dosage in reaction solution. The results of contact angle measurement indicated that the hydrophilicity of Cu(OH)2 nanofiberous membranes was enhanced by the immobilization of heparin. The adhesion, activation and transmutation of platelets on Hep@Cu(OH)2 membrane were suppressed remarkably due to the introduction of heparin, which suggested that the Hep@Cu(OH)2 membranes had good hemocompatibility. In addition, Cu(OH)2 and Hep@Cu(OH)2 nanofiberous membranes exhibited very good antibacterial activities against Escherichia coli and Staphyloccocus aureus., (Crown Copyright © 2013. Published by Elsevier B.V. All rights reserved.)

Signal regulatory protein (SIRP) α, a transmembrane protein belonging to the immunoglobulin superfamily, is a receptor for CD47. The interaction between SIRPα and CD47 plays an important role in regulating the phagocytosis of leukemia cells and leukemia stem cells (LSCs) by macrophages. Blocking antibodies against CD47 have been shown to promote phagocytosis of LSCs by macrophages. Here, we consider an alternative way to interrupt the interaction between CD47 and SIRPα. We expressed the extracellular domains of the human SIRPα (hSIRP(ext)) and the human CD47 (hCD47(ext)) in Escherichia coli as Trx fusion proteins, and purified them by using affinity chromatography. We show that the purified fusion protein Trx-SIRP(ext) could interact in vitro with Trx-hCD47(ext). Moreover, Trx-SIRP(ext) could effectively bind to Jurkat T-ALL cells, which expressed CD47 at a high level. CD47(ext), on the other hand, bound to human macrophages. In vitro phagocytosis assay showed that these fusion proteins could enhance the phagocytosis of Jurkat cells by macrophage, with Trx-hSIRP(ext) showed a higher efficiency than Trx-CD47(ext). These results indicated that the soluble Trx-hSIRP(ext) and Trx-CD47(ext) polypeptides could be alternative molecules to interrupt CD47-SIRPα interaction between leukemia cells and macrophages, and might be potentially useful for the targeted therapy of leukemia., (Copyright © 2012 Elsevier Inc. All rights reserved.)

Two new xanthones, angustins A and B (1 and 2), were isolated from the aerial parts of Swertia angustifolia together with six known compounds (3-8). The structures of these two xanthones were elucidated by extensive analysis of the spectroscopic data. In addition, compounds 3 and 6-8 were isolated from this plant for the first time.

Superhydrophilic organic/inorganic hybrid surfaces have been fabricated on blend membranes of poly(vinylidene fluoride) (PVDF) and poly(styrene-alt-maleic anhydride) (SMA). The blend membranes were prepared from PVDF/SMA mixed solution with N,N-dimethylacetamide (DMAc) as solvent by immersion-precipitation phase inversion process. The gained blend membranes were immersed into γ-aminopropyltriethoxysilane (APTS) solution to generate SMA/silica hybrid surfaces by the reaction between anhydrides and APTS. The hybrid surfaces chemical compositions, morphologies and hydrophilicity were investigated in detail. It demonstrates that the hybrid surfaces possess micro-nano hierarchical structure and display superhydrophilicity property and good stability. Finally, the reaction and formation mechanism of the superhydrophilicity hybrid surface was discussed., (Copyright © 2011 Elsevier Inc. All rights reserved.)

Based on the self-polymerization and strong adhesion characteristics of dopamine in aqueous solution, a novel and convenient approach was developed to immobilize protein onto porous polyethylene (PE) membranes. A thin polydopamine (pDA) layer was formed and tightly coated onto PE membrane by dipping simply the membrane into dopamine aqueous solution for a period of time. Subsequently, bovine serum albumin (BSA) was bound onto the obtained PE/pDA composite membranes via the coupling between BSA and the reactive polydopamine layer. The firm immobilization of polydopamine layer and BSA was verified by attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS). The results of water contact angle measurement showed that the hydrophilicity of PE membrane was significantly improved after coating polydopamine and binding BSA. The experiments of blood platelet adhesion indicated that BSA-immobilized PE membrane had better blood compatibility than the unmodified PE and the PE/pDA composite membranes. The investigations on hepatocyte cultures and cell viability revealed that the polydopamine coating endowed PE membrane with significantly improved cell compatibility. Compared to BSA surface, polydopamine surface is more favorable for cell adhesion, growth, and proliferation., (Copyright © 2011 Elsevier B.V. All rights reserved.)

Chinese mitten crab Eriocheir sinensis is one of the most important aquaculture crustacean species in China. A cDNA library was constructed from mixed tissues of E. sinensis challenged with LPS. Eight genes involved in immune response were identified from 319 single colonies. Among them, two different C-type lectin-like domain (CTLD)-containing proteins were firstly identified in Chinese mitten crab. The full-length cDNA sequences of two C-type lectin-like domain (CTLD)-containing proteins named EsCTLDcp-1 and EsCTLDcp-2 were cloned by 5' RACE. The deduced amino acid sequences of EsCTLDcp-1 and EsCTLDcp-2 possessed several conserved features of C-type lectin subfamily. The tissue distribution of EsCTLDcp-1 and EsCTLDcp-2 was examined by Real-time PCR. In the normal Chinese mitten crab, the expression of EsCTLDcp-2 was detected in all tested tissues such as haemolymph, muscle, intestine, gill, heart, gonad and hepatopancreas, whereas in muscle, intestine, gill, heart and hepatopancreas for EsCTLDcp-1. The highest expressions of EsCTLDcp-1 and EsCTLDcp-2 were both observed in hepatopancreas. LPS significantly induced the expression of EsCTLDcp-1 and EsCTLDcp-2 in the hepatopancreas at the different time points. The induced fold change of EsCTLDcp-1 and EsCTLDcp-2 increased significantly from 2 h for EsCTLDcp-1 and 4 h for EsCTLDcp-2, and reached a maximum at 12 h, then dropped at 24 h. A differential pattern was found in Chinese mitten crab challenged with Chinese mitten crab pathogen Aeromonas hydrophila. The expression of EsCTLDcp-1 increased significantly at 2 h post-challenge crabs with A. hydrophila, then decreased at 4 h and 8 h, after that increased at 12 h and 24 h. The expression of EsCTLDcp-2 was decreased at the all time points. All these data suggest a differential role of EsCTLDcp-1 and EsCTLDcp-2 in the crab innate immune response to bacterial infection., (Copyright © 2010 Elsevier Ltd. All rights reserved.)

Past studies have shown that melanoma cells have largely adapted to endoplasmic reticulum (ER) stress. In this study, we report that melanoma cells under ER stress are more resistant to apoptosis induced by the microtubule-targeting chemotherapeutic drugs, docetaxel and vincristine, and this is, at least in part, due to activation of the phosphoinositide 3-kinase (PI3K)/Akt pathway mediated by the X-box-binding protein 1 (XBP-1) axis of the unfolded protein response. Treatment with the ER stress-inducer tunicamycin (TM) or thapsigargin before the addition of docetaxel or vincristine reduced the levels of apoptosis induced by the drugs. This was associated with inhibition of mitochondrial release of apoptogenic proteins and activation of Bax and Bak. Induction of ER stress resulted in the rapid activation of the PI3K/Akt pathway that seemed to be important in antagonizing docetaxel and vincristine, in that inhibition of Akt blocked the effect of pretreatment with TM on apoptosis induced by the drugs. Neither docetaxel nor vincristine triggered ER stress in melanoma cells, but the basal activity of XBP-1 signaling seemed to play a role in the protection against the drugs because small interfering RNA knockdown of XBP-1 enhanced docetaxel- and vincristine-induced apoptosis. In addition, inhibition of XBP-1 decreased the constitutive levels of activation of Akt and blocked the activation of Akt induced by TM. Taken together, these results identify activation of the PI3K/Akt pathway by XBP-1-mediated signaling of the unfolded protein response as a resistance mechanism against docetaxel and vincristine in melanoma cells under ER stress.

Based on the strong adhesive behavior of poly(3,4-dihydroxy-l-phenylalanine) (or poly(DOPA)) on solid surface, poly(vinylidene fluoride) (PVDF) microporous membranes were surface-modified by the self-polymerization of DOPA in aqueous solution. Subsequently, heparin was immobilized covalently onto the obtained PVDF/poly(DOPA) composite membranes by the coupling between heparin and poly(DOPA) coating. The modified membranes were subjected to a long-term washing, and the firm immobilization of poly(DOPA) and heparin was confirmed by X-ray photoelectron spectroscopy (XPS). The results of water contact angle measurements showed that the hydrophilicity of PVDF membranes was significantly improved by the incorporation of poly(DOPA) and heparin. The effects of poly(DOPA) and heparin on membrane surface morphologies were also investigated by scanning electron microscopy (SEM).

A free-end comb-like hollow fiber membrane bioreactor was applied to treat wastewater. The results clearly showed that membrane fouling, defined as permeate flux decline, was greatly influenced by membrane module configuration. The permeate flux decline was much less for module b, demonstrating the superiority of module b over module a. Its permeate flux could be maintained in the range of 4.0 to 8.0 L x (m2 x h)(-1) under the operating conditions that temperature was 22-26 degrees C, the mixed liquor suspended solids (MLSS) concentration was 7500-10500 mg/L, aeration intensity was 200 L/h, suction time/ suspended time ratio was 9 min/1 min and suction pressure was 0.02 MPa. As this novel kind of membrane module resulted in high air scouring efficiency, relatively low aeration intensity was needed for the MBR maintenance. In addition, the permeate flux varied a little when suction time/ suspended time ratio changed from 12 min/1 min to 6 min/1 min. The performances of several different cleaning methods were tested and the results indicated that water cleaning + chemical cleaning + ethanol soaking had the best cleaning efficiency. SEM images clearly showed that the membrane surface became cleaner and the membrane holes became more visible after water cleaning + chemical cleaning, compared with water cleaning solely.

The molecular changes involved in the induction of apoptosis by vincristine in melanoma have not yet been well defined. Two human melanoma cell lines showing moderate (Mel-RM) and high (IgR3) sensitivity to vincristine were selected from a panel of eight melanoma lines for analysis. Induction of apoptosis was caspase dependent, and was associated with increases in mitochondrial membrane permeability. Vincristine upregulated the expression of Bax, Bak, PUMA, Noxa, p53 and p21 proteins, and downregulated and/or phosphorylated the Bcl-2 protein. Inhibitors of the Jun N-terminal kinase (JNK), but not p38 mitogen-activated protein kinase, significantly inhibited vincristine-induced apoptosis in both IgR3 and Mel-RM cells. In addition, vincristine induced phosphorylation and reduction in Bcl-2 was prevented by an inhibitor of JNK. Downregulation of mRNA for p53, PUMA or Bim by RNA interference had little or no influence on vincristine-induced apoptosis in IgR3 cells. In addition, silencing Bim mRNA did not affect vincristine-induced apoptosis in Mel-RM cells. These results suggest that vincristine-induced apoptosis of at least some melanoma cell lines is dependent on the activation of JNK. The results are consistent with the phosphorylation of Bcl-2 protein, resulting in the activation of Bax/Bak, release of cytochrome c from the mitochondria and the resulting activation of caspases.

A styrene-maleic anhydride (SMA) alternating copolymer with ultrahigh molecular weight (M(w)>10(6)) synthesized in super critical carbon dioxide (SC CO(2)) medium was used as hydrophilic polymeric additive in the preparation of polyethersulfone (PES) membranes. The PES/SMA blend membranes were prepared by immersion precipitation process. X-ray photoelectronic spectroscopy (XPS) measurements confirmed that the hydrolyzed SMA preferentially segregated to membrane-coagulant interface during membrane formation. For the PES/SMA blend membranes, no big change was observed in the cross-sectional structure and the mechanical properties were well maintained after SMA addition except that a thicker top layer was formed. The surface morphology analysis by atomic force microscopy (AFM) showed that the membrane surface roughness increased with the added SMA amount. The results of water contact angle, water absorbance measurements and static protein adsorption experiments revealed that the surface enrichment of SMA endowed PES/SMA blend membranes with significantly improved surface hydrophilicity and protein-adsorption resistance.

To endow hydrophobic poly(vinylidene fluoride) (PVDF) membranes with reliable hydrophilicity and protein resistance, an amphiphilic hyperbranched-star polymer (HPE-g-MPEG) with about 12 hydrophilic arms in each molecule was synthesized by grafting methoxy poly(ethylene glycol) (MPEG) to the hyperbranched polyester (HPE) molecule using terephthaloyl chloride (TPC) as the coupling agent and blended with PVDF to fabricate porous membranes via phase inversion process. The chemical composition changes of the membrane surface were confirmed by X-ray photoelectron spectroscopy (XPS), and the membrane morphologies were measured by scanning electron microscopy (SEM). Water contact angle, static protein adsorption, and filtration experiments were used to evaluate the hydrophilicity and anti-fouling properties of the membranes. It was found that MPEG segments of HPE-g-MPEG enriched at the membrane surface substantially, while the water contact angle decreased as low as 49 degrees for the membrane with a HPE-g-MPEG/PVDF ratio of 3/10. More importantly, the water contact angle of the blend membrane changed little after being leached continuously in water at 60 degrees C for 30 days, indicating a quite stable presence of HPE-g-MPEG in the blend membranes. Furthermore, the blend membranes showed lower static protein adsorption, higher water and protein solution fluxes, and better water flux recovery after cleaning than the pure PVDF membrane.

The objective of this study was to determine which transcription factors regulate the expression of the Pax3 gene in the mouse B16 F1 melanoma cell line. The results showed that the -14 kilobase pair (kbp) Pax3 promoter, but not the -1.6 kbp Pax3 promoter, promoted Pax3 gene expression in B16 cells. Comparison of the sequence of the -14 kbp human Pax3 promoter with mouse Pax3 promoters indicated that homology sequences were located between -6.9 and -5.8 kbp, and also that the 1.1 kbp fragment (between -6.9 and -5.8 kbp), linked -1.6 kbp proximal to the Pax3 promoter [plasmid PGPax3PIV (N6.9/5.8) delta SST Lacz], could mimic the functions of plasmid PGPax3 -14(N-1.6) Lacz. Mutations of the core binding elements of either Pax3 site I or II or both sites I and II reduced significantly the beta-galactosidase (beta-gal) activity in the cells. However, mutations of the core binding sequences of site A or B increased significantly the beta-gal activity in the cells. Biochemistry analysis demonstrated that POU transcription factors (Oct-1 and Brn-2) bind to the specific binding elements of both sites I and II to stimulate Pax3 gene expression, whereas the TALE homeodomain-containing proteins (Pbx and Prep1) bind with the core binding sequences of sites A and B to repress the expression of the Pax3 gene in B16 cells.

A fluorescent, magnetic composite poly(styrene-maleic anhydride) microsphere, suitable for conjugation with polysaccharide, was synthesized using magnetite/europium phthalate particles as seeds by copolymerization of styrene and maleic anhydride. The magnetite/europium phthalate particles were wrapped up by poly(ethylene glycol), which improved the affinity between the seed particles and the monomers. The composite microspheres obtained, with a diameter of 0.15-0.7 microm, contain 586-1013 microg of magnetite/g of microsphere and 0.5-16 mmol surface anhydride groups/g of microsphere. Heparin was conjugated with the reactive surface anhydride groups on the surface of the microspheres by covalent binding to obtain a fluorescent, magnetic, polysaccharide-based microsphere. The microspheres not only retain their bioactivities but also provide magnetic susceptibility and fluorescence. They can be used as a carrier with magnetic orientation and fluorescence tracer for potent drug targeting. The orientation, tracer, and anticoagulation of the fluorescence, magnetic, polysaccharide-based microspheres were studied. The anticoagulant activity of the microspheres and heparin binding capacity reached 54,212.8 U and 607.1 mg/g of dry microspheres. The activity recovery was 50.2%. The anticoagulant activity of the microspheres increases with the increase of the conjugated heparin on the surface of the microspheres and the decrease of the microsphere size. Furthermore, The fluorescent, magnetic, polysaccharide-based microspheres can be easily transported to a given position in a magnetic field and traced via their fluorescence.

The objective of this study was to examine the effect of paternal heat stress on the in vivo development of preimplantation embryos in the mouse. Synchronised B6CBF1 female mice were mated either to a control male mouse or to one that had been exposed at 7, 21 or 35 days previously, for 24 h to an ambient temperature of 36+/-0.3 degrees C and 66+/-5.6% relative humidity. Embryos were collected from the oviducts of mice at 14-16 h, 34-39 h or 61-65 h after mating or from the uterus at 85-90 h after mating and their developmental status was evaluated morphologically. The number of cells within blastocysts was also determined using bisbenzimide-propidium iodide staining. Paternal heat stress 7 days before mating reduced the proportion of embryos developing from 4-cell (4-C) to morulae (M), hatched blastocysts, total blastocysts and the number of inner cell mass (ICM) and trophectoderm (TE) cells in the blastocyst. Paternal heat stress 21 days prior to mating reduced the proportion of 2-C and 4-C to M embryos with no embryos developing to blastocysts. There were also increases in the number of 1-C and abnormal embryos recorded at this time. Paternal heat stress 35 days before mating decreased the proportion of 2-C embryos, expanded blastocysts and ICM and TE cells in the blastocyst. These results support previous work demonstrating that both the sperm in the epididymis and germ cells in the testis are susceptible to damage by environmental heat stress, with spermatocytes being the most vulnerable. This study also demonstrates that subtle effects on the male such as a short exposure to elevated environmental temperatures can translate to quite profound paternal impacts on early embryo development.

This study was undertaken to investigate the effects of three media, volume and type of oil and frequency of observation on the in vitro development of mouse zygotes. B6CBF1 female mice (4 to 6 wk old) were superovulated using PMSG/hCG and mated with a proven fertile male of the same strain. Putative zygotes with polar bodies were collected from the oviducts of mated mice, 25-28 h after hCG injection, and were cultured in vitro. Embryo development was evaluated at either 96 h and 120 h or every 24 h for 120 h. The results obtained showed that the CZB medium was better than the KSOM and HCO3HTF media, and the use of 1 mL of paraffin oil was better than the use of 0.5 mL of paraffin oil. The effect of paraffin oil and mineral oil on embryo development was examined and the results indicated that the use of paraffin oil was better than the use of mineral oil. Repeated observations did not influence the proportion of embryos developing to blastocysts.