Search

Cu 2+ in wastewater is hazardous to human health, and adsorption technology can effectively remove heavy metal ions. In this study, sulfhydryl graphene oxide/chitosan/ε-polylysine (SGCS-E) polymeric antimicrobial materials were prepared using 3D printing technology. These materials were characterized using scanning electron microscopy, Fourier transform infrared spectroscopy, and XPS. The effects of temperature and other influencing factors on the adsorption performance were systematically investigated. The adsorption process followed pseudo-second-order kinetics and the Langmuir model. The maximum adsorption capacity of the adsorbent was 313 mg/g at an initial Cu 2+ concentration of 20 mg/L, pH 5, and a temperature of 303.15 K. The study on the adsorption mechanism showed that the adsorption of Cu 2+ by SGCS-E was mainly controlled by chemical interactions. Antibacterial experiments showed that SGCS-E has a good growth inhibition effect on E. coli and S. aureus. The antibacterial process of SGCS-E is mainly achieved by interfering with the synthesis of proteins and DNA in bacterial cells. Therefore, SGCS-E can not only adsorb and remove Cu 2+ from wastewater but also inhibit the overgrowth of microorganisms in the porous adsorbent and improve its reusability, making it a dual-functional adsorbent-antibacterial material with high stability., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

To improve the toughness of the rice dough, protein transglutaminase (TGase) combined with sodium metabisulfite (SMB) modification was used. The influences of modification on rice dough and protein were investigated, and their physicochemical and structural characteristics were analyzed. Mechanical analysis results indicated that the tanδ and texture characteristics of the modified rice dough were close to those of the wheat dough. The content of weakly bound water increased after rice dough modification. The average particle size of the modified rice protein (MRP) increased. The α-helix and β-turn increased, the β-sheet of MRP was reduced. The hydrogen, ionic, and hydrophobic bond contents of the MRP were significantly higher than those of the unmodified rice protein (URP). The results showed that TGase combined with SMB changed the URP network structure, thereby effectively regulating the viscoelastic balance of the unmodified rice dough., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

To investigate the impact of micro-crushing technology on rice flour characteristics and its enhancement of rice cake quality, resting angle, slip angle, solubility, water-holding capacity, emulsification, oil absorption, gelatinization, and baking quality, rice flour and rice cakes were analyzed using a texture analyzer and a gelatinization instrument. The results indicated that a decrease in particle size led to a significant increase in damaged starch from 18% to 26.5%. Both the resting angle and slip angle increased, indicating reduced fluidity. The gelatinization temperature decreased from 76.63 °C to 71.61 °C, the gelatinization time was reduced from 6.6 min to 6.4 min, and gelatinization viscosity initially increased and then decreased. Water-holding capacity increased 1.0-fold with decreased particle size, and solubility increased 11.6-fold together with the increase temperature. Emulsification and oil absorption were optimal when the particle size exceeded 120-140 mesh. The conductivity of the rice flour suspension rose with decreased particle size, while the conductivity of rice flour paste and cake batter decreased. Decreased particle size led to significantly reduced rice cake hardness and chewiness of 47.77% and 52.44%, while elasticity, restoration, specific volume, and porosity increased 18.75%, 15.15%, 31.16% and 25.10%, respectively. The skin and core color darkened with reduced luminosity, correlating with enhanced sensory scores. Correlation analysis revealed that physiochemical properties of rice flour influenced gelatinization properties, thereby affecting rice cake quality. This study provides a foundation for utilizing fine rice flour in rice cakes.

In the process of flue gas desulfurization and denitrification, the generation of high-sulfate wastewater containing nitrogen is a significant challenge for biological wastewater treatment. In this study, halophilic activated sludge was inoculated in a Sequencing Batch Reactor to remove nitrogen from wastewater with a high sulfate concentration (60 g/L). With the influent concentration of 180 mg/L, the removal rate of total nitrogen was more than 96.7%. The effluent ammonium nitrogen concentration was lower than 1.94 mg/L, and the effluent nitrate nitrogen and nitrite nitrogen concentrations were even lower than 0.77 mg/L. The salt tolerance of activated sludge is mainly related to the increase in the content of ectoine in microbial cells. The Specific Nitrite Oxidation Rate is quite low, while the Specific Nitrite Reduction Rate and Specific Nitrate Reduction Rate are relatively strong. In the system, there are various nitrogen metabolic processes, including aerobic nitrification, anaerobic denitrification, and simultaneous nitrification-denitrification processes. By analyzing the nitrogen metabolic mechanisms and microbial community structure of the reaction system, dominate bacteria can be identified, such as Azoarcus , Thauera , and Halomonas , which have significant nitrogen removal capabilities.

Interferon regulatory factor 5 (IRF5) is a critical transcription factor in the toll-like receptor signaling pathway. It is associated with autoimmune disorders, such as rheumatoid arthritis, systemic lupus erythematosus, and inflammatory bowel disease. However, the relationship between the functional single nucleotide polymorphisms (SNPs) of IRF5 and its mRNA expression level in patients with neuromyelitis optica spectrum disorder remains unclear. The present study aimed to investigate the relationship between polymorphisms and mRNA expression levels of the IRF5 gene with the incidence of neuromyelitis optica spectrum disorder (NMOSD) in northern Chinese Han people. Two loci of the IRF5 gene (rs2004640 and rs2280714) of 164 patients with NMOSD and 269 healthy subjects were genotyped using the multiple SNaPshot technique. The frequencies of alleles, genotypes, and haplotypes were compared. Stratified analysis was performed according to age, sex, AQP4 status, onset age, and Expanded Disability Status Scale (EDSS) score. The IRF5 mRNA levels in peripheral blood mononuclear cells (PBMCs) of 64 NMOSD patients (32 patients in the acute stage and 32 patients in the remission stage) and 35 healthy subjects were detected by real-time PCR. The association of SNP polymorphisms with the mRNA expression level was determined by nonparametric tests. Allele and genotype frequency distributions of rs2004640 showed significant differences between both groups. Compared to healthy controls, the frequency of rs2004640 T allele markedly increased in patients (OR = 1.51, 95% CI = 1.09-2.08, P = 0.005). Minor allele T and GT genotype of rs2004640 that significantly increases the risk of NMOSD were discovered using genetic inheritance models (codominant, dominant, and overdominant) and haplotype analyses. Subsequent haplotype analyses revealed that the major haplotype "T-A" containing the risk alleles (the SNP sequence of the alleles was rs2004640 and rs2280714) had adverse effects on NMOSD. Based on the stratification analysis according to the EDSS score, the GT genotype frequency in the EDSS ≥ 4 group (38.2%) was markedly lower than that in the EDSS < 4 group (61.8%) (OR = 0.32, 95% CI = 0.15-0.68, P = 0.0054), with a significant difference. The IRF5 mRNA expression level was increased in NMOSD patients compared to that in normal subjects. IRF5 gene polymorphisms may be tightly associated with the genesis and progression of NMOSD in northern Chinese Han people. IRF5 mRNA expression was increased in patients with NMOSD and significantly increased in patients with acute phase. Perhaps IRF5 expression levels can be used as a predictor of disease activity in the future., (© 2024. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

In a previous study, rice bread was prepared using a combination of rice-wheat mixed flour. To investigate the impact of the partial adoption of extruded rice flour (ERF) on mixed flour (MF) and mixed dough (MD), the effects of adding ERF on the pasting, mixing characteristics, texture, and water retention of the MF and MD were examined by a rapid visco analyzer (RVA), Mixolab, texture profile analysis (TPA), and a low-field nuclear magnetic resonance analyzer (LF-NMR). The PV, TV, BD, FV, and SV of the MF declined as the incorporated amount of ERF increased. There was no significant difference in the PT at the 5-15% addition level ( p < 0.05), but it showed an increasing trend at the 20-30% level ( p < 0.05). The incorporation of ERF led to a significant increase in the water absorption (WA) of the MD, while the DT, ST, C2, C3, C4, and C5 exhibited a declining trend. The texture analysis revealed a significant decrease in the dough hardness with the addition of ERF, with a 55% reduction in the hardness of the 30% improved mixed dough (IMD), and the cohesiveness increased significantly ( p < 0.05). The IMD was mainly composed of weakly bound water. The content of weakly bound water increased with the ERF amount.

Background and Objectives: Neutrophils, underestimated in multiple sclerosis (MS), are gaining increased attention for their significant functions in patients with MS and the experimental autoimmune encephalomyelitis (EAE) animal model. However, the precise role of neutrophils in cervical lymph nodes (CLNs), the primary CNS-draining lymph nodes where the autoimmune response is initiated during the progression of EAE, remains poorly understood., Methods: Applying single-cell RNA sequencing (scRNA-seq), we constructed a comprehensive immune cell atlas of CLNs during development of EAE. Through this atlas, we concentrated on and uncovered the transcriptional landscape, phenotypic and functional heterogeneity of neutrophils, and their crosstalk with immune cells within CLNs in the neuroinflammatory processes in EAE., Results: Notably, we observed a substantial increase in the neutrophil population in EAE mice, with a particular emphasis on the significant rise within the CLNs. Neutrophils in CLNs were categorized into 3 subtypes, and we explored the specific roles and developmental trajectories of each distinct neutrophil subtype. Neutrophils were found to engage in extensive interactions with other immune cells, playing crucial roles in T-cell activation. Moreover, our findings highlighted the strong migratory ability of neutrophils to CLNs, partly regulated by triggering the receptor expressed on myeloid cells 1 (TREM-1). Inhibiting TREM1 with LR12 prevents neutrophil migration both in vivo and in vitro. In addition, in patients with MS, we confirmed an increase in peripheral neutrophils with an upregulation of TREM-1., Discussion: Our research provides a comprehensive and precise single-cell atlas of CLNs in EAE, highlighting the role of neutrophils in regulating the periphery immune response. In addition, TREM-1 emerged as an essential regulator of neutrophil migration to CLNs, holding promise as a potential therapeutic target in MS.

Problems such as bacterial resistance caused by tetracycline antibiotics pose a serious threat to human production and life and ecosystems. We prepared ZnFe 2 O 4 @ZnWO 4 heterojunction nanocomposites using hydrothermal and coprecipitation methods. The micromorphology, structure, and photoelectrochemical properties were analyzed. In combination with the presence of H 2 O 2 , the photo-Fenton activity of the antibiotic tetracycline at high concentration was tested under visible light irradiation, and its catalytic mechanism was investigated. The results showed that the composition of the composite heterojunction improved the catalytic activity of the catalyst. At a pollutant concentration of 50 mg L -1 and pH 5, 30% ZnWO 4 /ZnFe 2 O 4 degraded 92.1% of tetracycline in 60 min with a degradation rate of 0.0295 min -1 , which was 6.7 times higher than that of pure ZnFe 2 O 4 . The results of free radical trapping experiments and electron spin resonance techniques indicated that hydroxyl radical (•OH) and superoxide radical (O 2 - ) played important roles in the photo-Fenton degradation of tetracycline. Notably, the catalyst maintained a high degradation rate (80%) after five cycles. ZnFe 2 O 4 introduced in this article may provide a promising strategy for achieving strong light absorption and is authoritative in meeting future environmental requirements.

Copper ions in wastewater pose a significant threat to human and ecological safety. Therefore, preparing macroscopic adsorbents with reusable and high adsorption performance is paramount. This paper used graphene oxide as the adsorbent and chitosan as the thickener. Additionally, a silane coupling agent was employed to enhance the acid resistance of chitosan, and amino-modification of graphene oxide was performed. Macroscopic adsorbents with high adsorption capacity were fabricated using 3D printing technology. The results show that all five proportions of inks exhibit good printability. Dissolution experiments revealed that all materials maintained structural integrity after 180 days across pH values. Fourier Transform Infrared Spectroscopy (FTIR) and X-ray Photoelectron Spectroscopy (XPS) confirmed the successful preparation of the materials. Adsorption experiments showed that the best performing material ratio was 8 wt% graphene oxide and 7 wt% chitosan. Adsorption kinetics and isothermal adsorption experiments demonstrated that the adsorption process occurred via monolayer chemisorption. The adsorption process was attributed to strong electrostatic forces, van der Waals forces, and nitrogen/oxygen-containing functional group coordination. Cycling experiments showed that the material retained good adsorption performance after 6 cycles, suggesting its potential for practical heavy metal treatment applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Ammonia nitrogen (NH 3 -N/NH 4 + -N) serves as a crucial chemical in biochemistry and fertilizer synthesis. However, it is also a toxic compound, posing risks from eutrophication to direct threats to human health. Ammonia nitrogen pollution pervades water sources, presenting a significant challenge. While several water treatment technologies exist, biological treatment, though widely used, has its limitations. Hence, green and efficient photocatalytic technology emerges as a promising solution. However, current monolithic semiconductor photocatalysts prove inadequate in controlling ammonia nitrogen pollution. Therefore, this review focuses on enhancing semiconductor photocatalysts' efficiency through modification, discussing four mechanisms: (1) mono-ionic modification; (2) metallic and non-metallic modification; (3) construct heterojunctions; and (4) enhancement of synergistic effects of multiple technologies. The influencing factors of photocatalytic ammonia nitrogen removal efficiency are also explored. Moreover, the review outlines the limitations of current photocatalytic pollution treatment and discusses future development trends and research challenges. Currently, the main products of ammonia nitrogen removal include NO 3 - , NO 2 - , and N 2 . To mitigate secondary pollution, the green process of converting ammonia nitrogen to N 2 using photocatalysis emerges as a fundamental approach for future treatment. Overall, this review aims to deepen understanding of photocatalysis in ammonia nitrogen treatment and guide researchers toward widespread implementation of this endeavor., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Due to the colloidal stability, the high compressibility and the high hydration of extracellular polymeric substances (EPS), it is difficult to efficiently dehydrate sludge. In order to enhance sludge dewatering, the process of ultrasonic (US) cracking, chitosan (CTS) re-flocculation and sludge-based biochar (SBB) skeleton adsorption of water-holding substances to regulate sludge dewaterability was proposed. Based on the response surface method, the prediction model of the specific resistance to filtration (SRF) and sludge cake moisture content (MC) was established. The US cracking time and the dosage of CTS and SBB were optimized. The results showed that the optimal parameters of the three were 5.08 s, 10.1 mg/g dry solids (DS) and 0.477 g/g DS, respectively. Meantime, the SRF and MC were 5.4125 × 10 11 m/kg and 76.8123%, which significantly improved the sludge dewaterability. According to the variance analysis, it is found that the fitting degree of SRF and MC model is good, which also confirms that there is significant interaction and synergy between US, CTS and SBB, and the contribution of CTS and SBB is greater. Moreover, the process significantly improves the sludge's calorific value and makes its combustion more durable., Competing Interests: The authors declare there is no conflict., (© 2024 The Authors This is an Open Access article distributed under the terms of the Creative Commons Attribution Licence (CC BY 4.0), which permits copying, adaptation and redistribution, provided the original work is properly cited (http://creativecommons.org/licenses/by/4.0/).)

In contrast to nitrification-denitrification microorganisms that convert ammonia nitrogen in hypersaline wastewater into nitrogen for discharge, this research utilizes sludge enriched with salt-tolerant assimilation bacteria (STAB) to assimilate organic matter and ammonia nitrogen in hypersaline wastewater into ectoine - a biomass with high economic value and resistance to external osmotic pressure. The study investigates the relationship between the synthesis of ectoine and nitrogen removal efficiency of STAB sludge in three sequencing batch reactors (SBR) operated at different salinities (50, 75, and 100 g/L) and organic matter concentrations. The research reveals that, under low concentration carbon sources (TOC/N = 4, NH 4 + -N = 60 mg/L), the ammonia nitrogen removal efficiency of SBR reactors increased by 14.51 % and 17.25 % within 5 d and 2 d, respectively, when salinity increased from 50 g/L to 75 g/L and 100 g/L. Under high concentration carbon sources (TOC/N = 8, NH 4 + -N = 60 mg/L), the ammonia nitrogen removal efficiency of STAB sludge in the three reactors stabilized at 80.20 %, 76.71 %, and 72.87 %, and the total nitrogen removal efficiency was finally stabilized at 80.47 %, 73.15 %, and 65.53 %, respectively. The nitrogen removal performance by ammonium-assimilating of STAB sludge is more sustainable under low salinity, while it is more short-term explosive under high salinity. Moreover, the intracellular ectoine concentration of STAB sludge was found to be related to this behavior. Empirical formulas confirm that STAB sludge synthesizes ectoine from nutrients in wastewater through assimilation, and intracellular ectoine has a threshold defect (150 mg/gVss). The ectoine metabolism pathways of STAB sludge was constructed using the Kyoto Encyclopedia of Genes and Genomes (KEGG). The ammonia nitrogen in sewage is converted into glutamic acid under the action of assimilation genes. It then undergoes a tricarboxylic acid cycle to synthesize the crucial precursor of ectoine - aspartic acid. Subsequently, ectoine is produced through ectoine synthase. The findings suggest that when the synthesis of intracellular ectoine reaches saturation, it inhibits the continuous nitrogen removal performance of STAB sludge under high salinity. STAB sludge does not actively release ectoine through channels under stable external osmotic pressure., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier B.V.)

Interleukin-9 receptor alpha chain (IL-9Rα) is the ligand-binding subunit of IL-9R that plays roles in IL-9-mediated allergy, inflammation, infection, and tumor immunity. While mammalian IL-9Rαs have been extensively investigated, avian IL-9Rα has not yet been identified and characterized. In this study, we cloned chicken IL-9Rα (chIL-9Rα) and performed a phylogenetic analysis, analyzed its tissue distribution, characterized the expression form of natural chIL-9Rα. Phylogenetic analysis showed that chIL-9Rα has less than 25% amino acid homology with mammalian IL-9Rαs. The chIL-9Rα mRNA was abundantly detected only in heart and mitogen-activated peripheral blood mononuclear cells. Furthermore, 4 monoclonal antibodies (mAbs) against chIL-9Rα were generated using prokaryotic recombinant chIL-9Rα (rchIL-9Rα). Using anti-chIL-9Rα mAbs, natural chIL-9Rα expressed on the splenocytes of chickens was observed by indirect immunofluorescence assay (IFA), and its molecular weight of 51 kDa was identified by Western blotting. Overall, our study reveals for the first time the presence of IL-9Rα in birds, and provides immunological tools for further investigating the roles of chIL-9 in diseases and immunity., (Copyright © 2023 The Authors. Published by Elsevier Inc. All rights reserved.)

Heterotrophic nitrification and aerobic denitrification (HNAD) sludge were successfully acclimated. The effects of organics and dissolved oxygen (DO) on nitrogen and phosphorus removal by the HNAD sludge were investigated. The nitrogen can be heterotrophically nitrified and denitrified in the sludge at a DO of 6 mg/L. The TOC/N (total organic carbon to nitrogen) ratio of 3 was found to result in removal efficiencies of over 88% for nitrogen and 99% for phosphorus. The use of demand-driven aeration with a TOC/N ratio of 1.7 improved nitrogen and phosphorus removal from 35.68% and 48.17% to 68% and 93%, respectively. The kinetics analysis generated an empirical formula, Ammonia oxidation rate = 0.08917·(TOC·Ammonia) 0.329 ·Biomass 0.342 . The nitrogen, carbon, glycogen, and poly-β-hydroxybutyric acid (PHB) metabolism pathways of HNAD sludge were constructed using the Kyoto Encyclopedia of Genes and Genomes (KEGG). The findings suggest that heterotrophic nitrification precedes aerobic denitrification, glycogen synthesis, and PHB synthesis., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Tumor necrosis factor alpha (TNF-α) is an important proinflammatory cytokine and the only known cytokine that can directly kill tumor cells. Unlike mammalian counterparts, chicken TNF-α (chTNF-α) gene has not been identified until very recently due to its high GC content (∼70%) and long GC fragments. The biological functions of this newly-identified cytokine and its detection methods remain to be further investigated. In this study, the extracellular domain of chTNF-α was cloned into prokaryotic vector after codon optimization and recombinant chTNF-α protein was expressed. Subsequently, using recombinant chTNF-ɑ as immunogen, rabbit polyclonal antibody (pAb) and eight clones of mouse anti-chTNF-ɑ monoclonal antibodies (mAbs) were produced, respectively. Both the pAb and mAbs specifically recognized recombinant chTNF-ɑ expressed in E.coli and transfected COS-7 cells. Further mapping the antigenic region showed that all the mAbs recognized a region of amino acid residues 195-285 of chTNF-ɑ. Furthermore, an antigen-capture enzyme-linked immunosorbent assay for the detection of chTNF-ɑ was established using one mAb and the pAb. This assay showed no cross-reactivity with irrelevant Trx-fused antigens and could detect natural chTNF-ɑ expressed by mitogen-activated chicken splenocytes in a dose-dependent manner, with a detection limit of 1 ng/mL. Collectively, our results indicated that the mAbs and pAb against chTNF-α are specific and could be used for the study of the biological functions of chTNF-ɑ and the detection of chTNF-ɑ., Competing Interests: The authors declare no conflict of interest., (© 2022 The Author(s).)

Sponge iron is a potential material for nitrogen removal, but lack of a study about nitrogen removal in a membrane bioreactor (MBR) coupled with sponge iron. The performances and mechanisms of nitrogen removal of SI-MBR were investigated and compared it with that in GAC-MBR. The results showed that the average rate of organic matter removal in the SI-MBR was 92.74%, which was higher than that in the GAC-MBR (87.48%). And the average effluent NO 2 - -N and NO 3 - -N concentration in the SI-MBR (0.02 mg/L and 3.73 mg/L) was lower than that in the GAC-MBR (0.05 mg/L and 7.51 mg/L). Meanwhile, the highest nitrification rate and denitrification rate was respectively 3.544 ± 0.25 mg/(g VSS·h) and 6.643 ± 0.2 mg/(g VSS·h) in the SI-MBR, which was higher than that (3.094 ± 0.25 mg/(g VSS·h) and (6.376 ± 0.2 mg/(g VSS·h)) in the GAC-MBR. Additionally, the bacterial activities (e.g., DHA activity and respiratory activity) were obviously enhanced through the iron ion from sponge iron. The bacterial community in the SI-MBR system was more richness and diverse than that in the GAC-MBR. Ultimately, the mechanisms of enhanced biological nitrogen removal with sponge iron in MBR were analyzed. On the surface of sponge iron, the DIRB and FOB could use the iron ion from sponge iron as the electron transfer to improve the nitrogen and organic removal. With sponge iron, there is not only the nitrification bacteria and heterotrophic denitrifying microorganism enriched, but also the autotrophic denitrifying bacteria abounded obviously. The autotrophic denitrifying bacteria could use Fe(II) as an electron donor to achieve denitrification and enhance the nitrogen removal., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

The occurrence of microplastics (MPs, <5 mm) in drinking water has aroused extensive concerns, whereas our understanding of their presence in groundwater, a major source of drinking water, is still limited. The present study investigated the occurrence of microplastics in groundwater sampled from five sites in Jiaodong Peninsula, China. The abundance, type, and size of MPs in the groundwater samples were determined by Laser Direct Infrared following a well-established and quality-controlled analytical route. Notably, MPs were detected in groundwater across all five sampling sites, with high abundances ranging from 87 to 6832 particles/L and an average abundance of 2103 particles/L. The variation of the abundance of MPs was correlated to the distances between sampling sites and anthropogenic activities, which suggested significant impacts of aboveground industry and agriculture on the abundance of MPs in groundwater. Polyethylene terephthalate (PET) and polyurethane (PU) were the dominant polymer types detected in all groundwater samples. The MPs with a size smaller than 100 μm were found to account for >90% of the total MPs detected in four sampling sites, which was likely associated with their migratory routes through surface water runoff and infiltration into the groundwater settings. The results of this study suggest the importance of counting small MPs when determining their abundances in groundwater or their abundances would be considerably underestimated. The present study for the first time demonstrated the occurrence of MPs in groundwater in China, which improves our understanding of the MPs distribution and raises concerns about groundwater safety in terms of MPs pollution., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Short-chain chlorinated paraffins (SCCPs) were defined as persistent organic pollutants in 2017, and they can migrate and transform in the environment, accumulate in organisms, and amplify through the food chain. Although they pose a serious threat to environmental safety and human health, there are few papers on their removal. The current SCCP removal methods are expensive, require severe operating conditions, involve time-consuming biological treatment, and have poor removal specificities. Therefore, it is important to seek efficient methods to remove SCCPs. In this paper, a pressurized reactor was introduced, and the removal performance of SCCPs by Escherichia coli strain 2 was investigated. The results indicated that moderate pure oxygen pressurization promoted bacterial growth, but when it exceeded 0.15 MPa, the bacterial growth was severely inhibited. When the concentration of SCCPs was 20 mg/L, the removal rate of SCCPs was 85.61% under 0.15 MPa pure oxygen pressurization for 7 days, which was 25% higher than at atmospheric pressure (68.83%). In contrast, the removal rate was only 69.28% under 0.15 MPa air pressure. As the pressure continued to increase, the removal rate of SCCPs decreased significantly. The total amount of extracellular polymeric substances (EPS) increased significantly upon increasing the pressure, and the amount of tightly bound EPS (TB-EPS) was higher than that of loosely bound EPS (LB-EPS). The pressure mainly promoted the secretion of proteins in LB-EPS. Furthermore, an appropriate pure oxygen pressure of 0.15 MPa improved the dehydrogenase activity. The gas chromatography-mass spectrometry (GC-MS) results indicated that the degradation pathway possibly involved the cleavage of the C-Cl bond in SCCPs, which produced Cl - , followed by C-C bond breaking. This process degraded long-chain alkanes into short-chain alkanes. Moreover, the main degradation products detected were 2,4-dimethylheptane (C 9 H 20 ), 2,5-dimethylheptane (C 9 H 20 ), and 3,3-dimethylhexane (C 8 H 18 ).

Aims: Multiple sclerosis (MS) still maintains increasing prevalence and poor prognosis, while glucagon-like peptide-1 receptor (GLP-1R) agonists show excellent neuroprotective capacities recently. Thus, we aim to evaluate whether the GLP-1R agonist liraglutide (Lira) could ameliorate central nervous system demyelination and inflammation., Methods: The therapeutic effect of Lira was tested on experimental autoimmune encephalitis (EAE) in vivo and a microglia cell line BV2 in vitro., Results: Lira administration could ameliorate the disease score of EAE mice, delay the disease onset, ameliorate pathological demyelination and inflammation score in lumbar spinal cord, reduce pathogenic T helper cell transcription in spleen, restore phosphorylated adenosine monophosphate-activated protein kinase (pAMPK) level, autophagy level, and inhibit pyroptosis-related NLR family, pyrin domain-containing protein 3 (NLRP3) pathway in lumbar spinal cord. Additionally, cell viability test, lactate dehydrogenase release test, and dead/live cell staining test for BV2 cells showed Lira could not salvage BV2 from nigericin-induced pyroptosis significantly., Conclusion: Lira has anti-inflammation and anti-demyelination effect on EAE mice, and the protective effect of Lira in the EAE model may be related to regulation of pAMPK pathway, autophagy, and NLRP3 pathway. However, Lira treatment cannot significantly inhibit pyroptosis of BV2 cells in vitro. Our study provides Lira as a potential candidate for Multiple Sclerosis treatment., (© 2022 The Authors. CNS Neuroscience & Therapeutics published by John Wiley & Sons Ltd.)

Aiming at the problem of highly toxic Nitrogenous disinfection by-products (N-DBPs) produced by disinfection in the process of drinking water, two-point influent activated carbon-quartz sand biofilter, activated carbon-quartz sand biofilter, and quartz sand biofilter are selected. This study takes typical N-DBPs Dichloroacetonitrile (DCAN) as the research object and aromatic amino acid Tyrosine (Tyr), an important precursor of DCAN, as the model precursor. By measuring the changes of conventional pollutants in different biofilters, and the changes of Tyr, the output DCAN formation potential of the biofilters, this article investigates the control of DCAN generation of the two-point influent activated carbon-quartz sand biofilter. The results show that the average Tyr removal rate of the three biofilters during steady operation is 73%, 50%, and 20%, respectively, while the average effluent DCAN generation potential removal rate is 78%, 52%, and 23%, respectively. The two-point influent activated carbon-sand biofilter features the highest removal rate. The two-point water intake improves the hypoxia problem of the lower filter material of the activated carbon-quartz sand biofilter, and at the same time, the soluble microbial products produced by microbial metabolism can be reduced by an appropriate carbon sand ratio, which is better than traditional quartz sand filters and activated carbon-quartz sand biofilters in the performance of controlling the precursors of N-DBPs.

A simultaneous nitrification-denitrification and phosphorus removal (SNDPR) system operated in an alternating anaerobic/aerobic/anoxic (A/O/A) mode was revisited from new perspectives of sludge reduction and potential phosphorus recovery. Reliable and robust removal performance was obtained even under winter temperatures, with average removal efficiency of COD, TP, NH 4 + -N and TIN being 89.68%, 93.60%, 92.15% and 79.01% at steady state, respectively. Inoculated sludge got enhanced in biomass density, settleability, and bioactivity. And relatively stable amounts of extracellular polymeric substances (EPS) with a stable protein/ polysaccharide (PN/PS) ratio were observed over operation. Meanwhile, a low observed sludge yield (Y obs ) of 0.083 g MLSS/g COD (0.082 g MLVSS/g COD) was obtained. A maximum anaerobic phosphorus release up to 43.54 mg/L was found, thus providing phosphorus-rich and low-turbidity stream for further phosphorus recovery. Overall, the SNDPR system deserved attention for in situ sludge reduction and potential phosphorus recovery, beyond reliable and stable wastewater treatment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021. Published by Elsevier B.V.)

Currently, varied processes adopted to remove hexavalent chromium from aqueous solution have been realized to cause secondary pollution. As such, this study explored a green method for aqueous hexavalent chromium (Cr(Ⅵ)) reclamation by waste steel slag (SS) enhanced by natural pyrite (NP). Compared with the sole SS or NP, more efficient Cr(Ⅵ) removal was achieved by NP-SS at an initial pH value ranging from 1 to 8, resulting in a final pH value of 7-8. Cr(Ⅵ) in the solution could be initially reduced to Cr(III) by Fe 2+ provided by NP, which was then bound with the OH - in the solution and the supersaturated calcium silicate hydrate on the surface of SS. In addition, the stearic acid anions existing on the surface of SS could promote the adsorption of Cr(III) to form chromium stearate. The used adsorbent could be potentially used for chromium smelting. Overall, this study provides a feasible and environmental sustainable solution to chromium reclamation from hexavalent chromium-containing wastewater., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Background: Clostridium perfringens is an important zoonotic microorganism, which can cause diseases in animals and humans under suitable conditions. Contamination of C. perfringens in chicken products has been reported worldwide, but the genetic diversity and relationship of isolates were seldom analyzed., Objectives: The current study was undertaken to investigate the prevalence of C. perfringens from retail chicken products and sick chickens with suspected necrotic enteritis (NE) in Tai'an area, China., Methods: In total, 295 samples were collected from Tai'an large poultry retail market and veterinary hospital in 2018, then the isolates were tested for toxin genes, drug resistance and multilocus sequence typing (MLST)., Results: Overall, 138 (46.78%) samples were determined to be positive for C. perfringens, and 99.37% of the isolates were identified as C. perfringens type A, with the remaining isolates being type F; 18.99% of the isolates were positive for cpb2 gene. Antimicrobial susceptibility testing revealed that 52.27% of the isolates from poultry retail market and diseased chickens showed multiple antibiotic resistance. MLST results showed that 50 analyzed isolates can be divided into 39 sequences types (STs), clustered in three clonal complexes (CCs) and 23 singletons. Although most of the isolates belong to type A, considerable genetic diversity can be observed, with the Simpson's diversity index up to 0.9181. MLST results and phylogenetic analysis showed that a portion of the isolates from humans and chickens were assigned to the same clusters in the phylogenetic tree or found to be in the same CCs, indicating the chicken isolates and the human isolates are related in certain stratification., Conclusions: This study showed that the contamination rate of C. perfringens in the local retail chicken products was relatively high. Most of the isolates exhibit broad-spectrum antimicrobial resistance. The high antibiotic resistance of C. perfringens isolates and the relationship between isolates from human and chicken indicated potential public health risks., (© 2021 The Authors. Veterinary Medicine and Science published by John Wiley & Sons Ltd.)

The washing wastewater from the desulfuration and denitration of power plants has high salt (chloride and sulfate) and ammonia-nitrogen concentrations and is difficult to treat using microbiological methods. A novel anoxic/oxic biofilm process was developed to remove ammonia from wastewater. Three rapid strategies (sulfate concentration was increased from 0 to 60 g/L in 6, 13, and 22 days (R1, R2, and R3, respectively)) were applied and produced biofilm with the same nitrification capacity as slow strategies (100-203 days). Excessive organics inhibited the nitrification capacity of the biofilm. R1 excelled at ammonia removal (from 30% to 95%, 70 mg/(L·d), with an effluent ammonia concentration of 4 mg/L) at 60 g/L salinity after the organic load was reduced. The content of extracellular polymeric substances in biofilm depended on its capacity to remove organics. Pseudomonas and Thauera were enriched in the three reactors. Controlling the organic load might prevent the sulfur cycle., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Novel porous alginate-based nanocomposite hydrogels were prepared by incorporating polyaniline-polypyrrole modified graphene oxide (GO@PAN-PPy) as reinforcing fillers into the alginate matrix (GO@PAN-PPy/SA) for Cr(VI) and Cu(II) removal from water. Different in-situ co-polymerization functionalized GO with Py-to-An mass ratios of monomers (from nil to 1:1) and contents of GO@PAN-PPy (from nil to 2.0%(w/v)) were embedded into the alginate backbone to improve the sorption performance. Key factors, such as pH, coexisting metal ions, and swelling states were investigated in batch adsorption modes. The synergistic effect combined from polymer backbone and fillers could lower the impact of the pH-dependent adsorption reaction. With an adsorption ability superior to that of plain SA and GO/SA, the optimized GO@PAN-PPy-2(1)/SA exhibited good experimental maximum adsorption capacities for Cr(VI) (~133.7 mg/g) and Cu(II) (~87.2 mg/g) at pH 3.0, which were better than those of many other similar sorbents. The sorbents possessed excellent adaptability for 0.2 M salt for Cr(VI) removal but poor for Cu(II) removal. Pre-swelling treatment and co-adsorption could enhance the adsorption performance. The excellent reusability of hydrogel was demonstrated after five cycles in single/binary system. Overall, this work reveals that the resultant hydrogel holds potential as candidate sorbent to remove anionic-cationic heavy metal ions from water., (Copyright © 2021. Published by Elsevier B.V.)

Better adaptive kinetics model for CO 2 sequestration utilizing wastes in steelmaking plant has a big significance for establishing green out-circulating network system. This work investigated the effect of temperature, L/S ratio and cold-rolling wastewater concentration on carbonation degree in basic oxygen furnace slag and CRW carbonation process, then their kinetics was discussed by surface coverage model and shrinking core model, respectively, in order to evaluate their adaptability and accuracy. Furthermore, CO 2 sequestration intensifying factor was originally proposed for considering the carbonation depth, through comparing diffusion coefficient of CO 2 between water carbonation and wastewater carbonation. The results showed that carbonation conversion increased as temperature and CRW concentration increased except for L/S ratio, and the maximum carbonation could reach 41.499 ± 1.240%. Because higher prediction error existed in surface coverage model, the shrinking core model had a better adaptability and accuracy for analyzing carbonation process in autoclave. Meanwhile, the CO 2 sequestration intensifying factor was 1.6 times as big as carbonation process in distilled water as a result of D CO2 value. CO 2 sequestration reaction in our work was controlled by calcium diffused because of D CO2 (0.700-0.976 × 10 -4 cm 2 s -1 ) and D Ca (0.935-1.149 × 10 -5 cm 2 s -1 ). The results above will be helpful for us to better comprehend the reaction kinetics at micro-scale, when the idea of triple wastes self-circulation system network will be established to industrial application., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Tea leafhopper ( Empoasca onukii Matsuda) is amongst the key pests in tea plantations around the East Asian region. Stereomicroscopy is a conventional method used for detecting tea leafhopper eggs by dissecting the tender tissues. However, there is a need for a faster and more efficient method to directly observe and investigate intact eggs within tea shoots. The absence of a proven method limits research efforts for determining the oviposition behavior of E. onukii. Herein, we applied the blue light detection method (BLDM), a technique recently developed for other species, in order to detect E. onukii eggs directly and non-destructively within the tender shoot. In addition, we compared BLDM against the traditional stereomicroscope detection method (SMDM) for four tea cultivars. Notably, our results revealed that BLDM was precise and effective in measuring the egg laying quantity of E. onukii on intact tea shoots. Neither tea cultivars nor egg density in the tender shoot significantly affected the accuracy of BLDM. Furthermore, biological characteristics that have rarely been reported previously for E. onukii were investigated using the BLDM, including zygote duration, ovipositional rhythm, egg distribution within the tender shoot, and in different leaf positions, numbers of eggs laid by a single female daily, and laid by the entire generation. Therefore, these findings provide insights into the basic and theoretical evidence for the strategy and mechanism associated with the oviposition behavior of E. onukii ., Competing Interests: The authors declare no conflict of interest.

The performance of pollutant removals, tetracycline (TC) and norfloxacin (NOR) removals, membrane fouling mitigation and the microbial community of three Anoxic/Oxic membrane bioreactors (AO-MBRs), including a moving bed biofilm MBR (MBRa), a fixed biofilm MBR (MBRb) and an AO-MBR (MBRc) for control, were compared in treating antibiotic-containing synthetic mariculture wastewater. The results showed that MBRb had the best effect on antibiotic removal and membrane fouling mitigation compared to the other two bioreactors. The maximum removal rate of TC reached 91.65% and the maximum removal rate of NOR reached 45.46% in MBRb. The addition of antibiotics had little effect on the removal of chemical oxygen demand (COD) and ammonia nitrogen (NH 4 + -N)-both maintained more than 90% removal rate during the entire operation. High-throughput sequencing demonstrated that TC and NOR resulted in a significant decrease in the microbial diversity and the microbial richness MBRs. Flavobacteriia , Firmicutes and Azoarcus , regarded as drug-resistant bacteria, might play a crucial part in the removal of antibiotics. In addition, the dynamics of microbial community had a great change, which included the accumulation of resistant microorganisms and the gradual reduction or disappearance of other microorganisms under antibiotic pressure. The research provides an insight into the antibiotic-containing mariculture wastewater treatment and has certain reference value.

The wastes network system exploration in metallurgical process imposes of great significance for advancing green circular economy in steel plant. This paper originally proposes a closed-circulating CO 2 sequestering process for wastes appreciation and harmless disposal, and the effect of two circulation strategy, i.e. Slag circulation strategy and cold-rolling waste water(CRW) circulation strategy, on the CO 2 uptake efficiency, carbonation degree and desalination rate were systemically discussed. Then, their kinetics are analyzed by model and molecular simulation in detail, respectively. In addition, the energy consumption and the cost are simulated for comprehensively evaluating its superiority. The experimental and molecular simulation results all show that the peak values for both strategies could be achieved when circulation times is in the range of three to five. CRW circulation strategy has a better CO 2 uptake efficiency than slag circulation strategy, the CO 2 uptake efficiency is about 487kgCO 2 /tslag and corresponding desalination rate is 48.9%, when CRW is circulated for five times at 60 °C and 20 L/g for 90 min. Adopting CRW circulation strategy, the CO 2 sequestration efficiency is averagely doubled comparing to previous results. 129%-183% energy consumption and 35.6% cost would be reduced, which represents that the proposed routine is economical to step forward to industrial application., Competing Interests: Declaration of competing interest The authors declare no conflict of interest., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Cu(II) is one of the most widely-existed heavy metal ions in industrial effluents. A high concentration of Cu(II) leads to strong toxic effects on microorganisms and sludge for treating industrial wastewater which often contains aromatic pollutants. Granular sludge has different characteristics compared with floc sludge, and it may exhibit unique responses to the high concentration of Cu(II). Therefore, in this study, the variations of sludge properties and pollutant removal were investigated in the aerobic granular sludge (AGS) system with 0, 5, and 10 mg L -1 of Cu(II). The results suggested that both levels of Cu(II) promoted protein secretion and bounded with extracellular polymeric substances; thus, led to more compact granules with better settleability. Cu(II) had limited impacts on the overall organic degradation and denitrification efficiency, while it exerted significant negative effect on nitrification. The average NH 4 + -N concentration reached 1.4 ± 0.5, 6.7 ± 3.1, and 8.4 ± 1.5 mg L -1 in the effluent when the influent contained 0, 5, and 10 mg L -1 of Cu(II), respectively. The microbial community succession showed that no reduction was observed for the total relative abundance of main groups involved in organic removal such as Pseudoxanthomonas, Acidovorax, Acinetobacter, and Thauera. However, the growth of some functional groups such as Saccharibacteria for nitrification was inhibited by the toxic effect of Cu(II). These findings suggested that AGS could resist to the long-term toxic effects of Cu(II) by multiple rationales., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

This study compared the membrane fouling mitigation in two novel types of biofilm membrane bioreactor coupled with a pre-anoxic tank (BF-AO-MBR)-namely a fixed biofilm membrane bioreactor (FB-MBR) with fiber bundle bio-carriers and a moving-bed biofilm membrane bioreactor (MB-MBR) with suspended bio-carriers-relative to an anoxic/oxic MBR (AO-MBR), at salinities ranging from zero to 60 g/L. The results showed that the FB-MBR mitigated membrane fouling to a greater degree than the MB-MBR and AO-MBR. During operation, the FB-MBR exhibited the lowest fouling development, with three membrane filtration cycles, while the AO-MBR and MB-MBR had 22 and nine cycles, respectively. The key fouling factor in all reactors was cake layer resistance (R C ), which contributed to 89.61, 62.20, and 83.17% of the total fouling resistance (R T ) in AO-MBR, FB-MBR and MB-MBR, respectively. Additionally, in the FB-MBR, the pore blocking resistance (30.07%) was also an important cause of fouling. Fiber bundle bio-carriers and suspended bio-carriers reduced the R T by 37.68% and 21.24% (mainly the R C ) compared to that of AO-MBR. Furthermore, FB-MBR and MB-MBR caused a decrease of suspended biomass (80.14 and 15.90%, respectively), and the latter exhibited a higher sludge particle size than AO-MBR, possibly resulting in the cake layer decline. The studied BF-AO-MBRs further alleviated the fouling propensity by reducing the amount of soluble microbial product (SMP) and extracellular polymeric substances (EPS) under all salinity levels, especially the FB-MBR. Among the protein components, the amounts of tryptophan protein-like substance and aromatic protein-like substance were significantly lower in the FB-MBR compared to the AO-MBR and MB-MBR. Additionally, at 60 g/L salinity, the structure of the microbial community in the FB-MBR had a lower abundance of Bacteroidetes and more biomacromolecule degraders, which may have contributed to the moderation of membrane fouling., Competing Interests: Declaration of competing interest We declare that we have no financial and personal relationships with other people or organizations that can inappropriately influence our work, there is no professional or other personal interest of any nature or kind in any product, service and/or company that could be construed as influencing the position presented in, or the review of, the manuscript entitled “Membrane fouling mitigation in different biofilm membrane bioreactors with pre-anoxic tanks for treating mariculture wastewater”., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Sorption and degradation are considered two primary modes of pollutant removal by microorganisms, and extracellular polymeric substances (EPS) have been shown to play an important role in these biological processes. However, their role in removing refractory organic pollutants the effects of intracellular substances in microorganisms remain unclear. In this study, we investigated both the removal mechanism and intracellular substances involved in removing the pollutant acenaphthene (ACE) from Pseudomonas sp. bacteria in anaerobic conditions. The results indicated that the ACE was mainly adsorbed rather than degraded by bacteria. Moreover, ACE had little impact on EPS secretion at concentrations ranging 0-3 mg/L. Cell walls and membranes accounted for more than 70% of ACE adsorption, whereas intra-cellular substances accounted for about 10-25% and the effect of other components on ACE adsorption was not obvious. A possible mechanism of ACE removal by bacteria is proposed.

The performance of pollutant removals, activated sludge characteristics, and microbial communities of two biofilm membrane bioreactors coupled with pre-anoxic tanks (BF-AO-MBRs) (one using fiber bundle bio-carriers (FB-MBR) and the other using suspended bio-carriers (MB-MBR)) were compared at the salinity between zero and 60 g/L. At all salinities, three bioreactors showed good COD average removal efficiencies (>94.1%), and FB-MBR showed the best TN removal efficiency (90.4% at 30 g/L salinity). Moreover, FB-MBR had the faster process start-up time and better salt shock resistance. At high salinities (30-60 g/L), more extracellular polymeric substances were produced by the BF-AO-MBRs to avoid the penetration of salt and protect the bacterial community. Because of the different attachment patterns of biofilms, the microbial community structure in the FB-MBR exposed to 30 g/L salinity had higher nitrite-oxidizing/ammonia-oxidizing bacteria ratio (6.44) with more abundance of denitrifiers, which contribute to higher TN removal efficiency and lower nitrite accumulation., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Considering the pH fluctuation in industrial wastewater, the response and resilience to pH shock should be investigated during aerobic granular sludge (AGS) system operation. In this work, three AGS reactors, namely R1, R2, and R3 for simultaneous removal of aniline and nitrogen were exposed to neutral, acidic, and alkaline conditions, respectively. The removal efficiency of aniline and chemical oxygen demand with pH variation was over 99.9% and 91.0%, respectively after stable in the three reactors. The aniline removal rate modestly decreased in R2 and R3 after pH varied and denitrification was slightly improved in acidic environment with average removal efficiency of 61.2%. The mature AGS could maintain settleability in R1 and R2 with 30 min sludge volume index below 35 mL g -1 but was unstable under alkaline condition. Correspondingly, the secretion of extracellular polymeric substances especially protein decreased notably in R3. The bacterial groups varied with pH shock, but some could recover after adjustment to original pH value. Proteobacteria was the predominant phylum in the three reactors and Bacteroidetes was enriched in alkaline conditions. In addition, the main functional genera such as Achromobacter, Defluviimonas, Enterobacter, Pseudomonas, and Pseudoxanthomonas, were detected in the system and were found to be responsible for reduction of aniline and nitrogen., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

A magnetic KMnO 4 -treated graphene-oxide-based nanocomposite, Fe 3 O 4 @GO/MnO x , was synthesized through a facile hydrothermal technique. The properties of the Fe 3 O 4 @GO/MnO x nanocomposite were characterized by SEM, XRD and FTIR. Batch experiments showed that the maximum adsorption capacity calculated by the Langmuir model for Cu 2+ was 62.65 mg g -1 at T = 303.15 K. Kinetics and XPS analysis also revealed that the mechanism of Cu 2+ removal was mainly a chemical adsorption process involving both the MnO x particles and oxygen functional groups. The prepared Fe 3 O 4 @GO/MnO x was found to be an ideal adsorbent for the removal of Cu 2+ ions due to the MnO x particle coating, and was easily separated using a magnetic field after utilization. Reusability studies imply that Fe 3 O 4 @GO/MnO x is a suitable material for heavy metal ion removal from aqueous solutions in real applications.

The paralimnine leafhopper genus Jilinga Ghauri is revised and additional characters of the leg and female genitalia are described. A new species, Jilinga taibaiensis sp. nov., from China is described. Habitus photographs and illustrations of male and female genitalia of J. taibaiensis sp. nov. and J. asymmetrica Xing are provided. A key is given to distinguish males of five species.

Hypersaline phenol-rich wastewater is hard to be treated by traditional biological systems. In this work, a sequencing batch reactor was used to remove phenol from hypersaline wastewater. The removal performance was evaluated in response to the variations of operating parameters and the microbial diversity was investigated by 454 pyrosequencing. The results showed that the bioreactor had high removal efficiency of phenol and was able to keep stable with the increase of initial phenol concentration. DO, pH, and salinity also affected the phenol removal rate. The most abundant bacterial group was phylum Proteobacteria in the two working conditions, and class Gammaproteobacteria as well as Alphaproteobacteria was predominant subgroup. The abundance of bacterial clusters was notably different along with the variation of operation conditions, resulting in changes of phenol degradation rates. The high removal efficiency of phenol suggested that the reactor might be promising in treating phenol-laden industrial wastewater in high-salt condition., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Dissolved organic nitrogen (DON) is a key precursor of numerous disinfection by-products (DBPs), especially nitrogenous DBPs (N-DBPs) formed during disinfection in drinking water treatment. To effectively control DBPs, reduction of the DON concentration before the disinfection process is critical. Traditional biofilters can increase the DON concentration in the effluent, so an improved biofilter is needed. In this study, an improved biofilter was set up with two-layer columns using activated carbon and quartz sand under different influent patterns. Compared with the single-layer filter, the two-layer biofilter controlled the DON concentration more efficiently. The two-point influent biofilter controlled the DON concentration more effectively than the single-point influent biofilter. The improved biofilter resulted in an environment (including matrix, DO, and pH) suitable for microbial growth. Along the depth of the biofilter column, the environment affected the microbial biomass and microbial activity and thus affected the DON concentration.

In this work, 4-aminothiophenol and 3-aminopropyltriethoxysilane were firstly used to functionalize graphene oxide (GO) in order to promote the sorption efficiencies of methylene blue (MB) and copper (Cu(2+)). Characterization experiments illustrated that sulfydryl group (SH) and amino group (NH2) were existed onto 4-aminothiophenol modified GO (GO-SH) and 3-aminopropyltriethoxysilane modified GO (GO-N), respectively. Adsorption isotherm results showed that the maximum adsorption capacities of MB by GO-SH and GO-N were 763.30 and 676.22mg/g, which was much higher than original GO 455.95mg/g. For Cu(2+) adsorption, the maximum adsorption capacities by GO-SH and GO-N were 99.17 and 103.28mg/g, suggesting that the engineered GO exhibited greater Cu(2+) sorption ability than original GO 32.91mg/g. Both MB and Cu(2+) removal rates increased with pH and adsorbent dosage increased, while the sorption rates weakly reduced with increasing ionic strength. The modification by SH and NH2 would not only increase the sorption sites, but also cause chelation with heavy metals, and thus improving the sorption capacities of MB and Cu(2+)., (Copyright © 2016 Elsevier B.V. All rights reserved.)

A continuous-upflow biofilter packed with sponge iron was constructed for nitrate removal under an anaerobic atmosphere. Microbacterium sp. W5, a nitrate reducing and Fe(II) oxidizing strain, was added to the biofilter as an inoculum. The best results were achieved when NO3 (-)-N concentration was 30 mg/L and Fe(2+) was 800 mg/L. Nitrite in influent would inhibit nitrate removal and aqueous Fe(2+) resulted in encrustation. Fe(II)EDTA would prevent cells from encrustation and the maximum nitrogen removal efficiency was about 90 % with Fe(II)EDTA level of 1100 mg/L. Nitrate reduction followed first-order reaction kinetics. Characteristics of biofilms were analyzed by X-ray fluorescence spectroscopy.

Effects of some key factors on hydrogenotrophic denitrification were investigated in lab-scale bioreactors. Results indicated that optimum biomass loading, pH value, temperature, nitrate loading, and C/N ratio in this study were optical density at 600 nm (OD600) of 0.173, 6.0∼7.0, 35 °C, 105 mg L(-1), and 30, respectively. To obtain a better understanding of microbial community in the bioreactors, the 454-pyrosequencing technology was used to characterize the 16S ribosomal RNA (16S rRNA) gene of bacteria in selected samples Y1 and Y2, in which a total of 62,559 effective sequences (36,445 in Y1 and 26,114 in Y2) were obtained. The taxonomic complexities in two samples were compared at phylum/class/genus levels. In total, 41 bacterial phyla, 43 bacterial classes, and 312 genera were detected, where phylum Firmicutes, class Clostridia were most abundant. Genus Proteiniclasticum was predominant among the top 100 genera. This work aims to add some novel insights into hydrogenotrophic denitrification process and its microbial community structures in bioreactors.

Dissolved organic nitrogen (DON) is potential precursor of disinfection byproducts (DBPs), especially nitrogenous DBPs. In this study, we investigated the impact of biofilters on DON concentration changes in a drinking water plant. A small pilot plant was constructed next to a sedimentation tank in a drinking water plant and included activated carbon, quartz sand, anthracite, and ceramsite biofilters. As the biofilter layer depth increased, the DON concentration first decreased and then increased, and the variation in DON concentration differed among the biofilters. In the activated carbon biofilter, the DON concentration was reduced by the largest amount in the first part of the column and increased by the largest amount in the second part of the column. The biomass in the activated carbon filter was less than that in the quartz sand filter in the upper column. The heterotrophic bacterial proportion among bacterial flora in the activated carbon biofilter was the largest, which might be due to the significant reduction in DON in the first part of the column. Overall, the results indicate that the DON concentration in biofiltered water can be controlled via the selection of appropriate biofilter media. We propose that a two-layer biofilter with activated carbon in the upper layer and another media type in the lower layer could best reduce the DON concentration., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

The adsorption behavior of Cr(VI) ions from aqueous solution by a chromium-tolerant strain was studied through batch experiments. An isolate designated Zer-1 was identified as a species of Bosea on the basis of 16S rRNA results. It showed a maximum resistance to 550 mg·L(-1) Cr(VI). The effects of 3 important operating parameters, initial solution pH, initial Cr(VI) concentration, and biomass dose, were investigated by central composite design. On the basis of response surface methodology results, maximal removal efficiency of Cr(VI) was achieved under the following conditions: pH, 2.0; initial concentration of metal ions, 55 mg·L(-1); and biomass dose, 2.0 g·L(-1). Under the optimal conditions, the maximum removal efficiency of Cr(VI) ions was found to be nearly 98%. The experimental data exhibited a better fit with the Langmuir model than the Freundlich model. The biosorption mechanisms were investigated with pseudo-first-order, pseudo-second-order, and intraparticle diffusion kinetics models. These results revealed that biosorption of Cr(VI) onto bacterial biomass could be an alternative method for the removal of metal ions from aqueous solution.

An aerobic denitrifier was isolated from activated sludge and the isolate possessed an average nitrate removal efficiency of 95.8% in 24 h, with the maximum nitrite accumulation of 25.6 mg/l. The bacterium could not conduct heterotrophic nitrification. The results of PCR indicated that the strain lacked the gene of amoA. The phylogenetic tree indicated a clear evolutionary divergence that Pseudomonas stutzeri C3 belonged to the group of strains that could not exhibit ammonia oxidation.

In the present study, a novel Pseudomonas sp. W1 was characterized in terms of its ability to perform nitrate removal coupled with anaerobic Fe⁻¹ oxidation under autotrophic growth condition. The effects of operating parameters with respect to the initial solution pH, temperature and initial Fe⁻¹ concentration on nitrate removal were investigated by central composite design. Based on the results of response surface methodology, the maximal nitrate removal efficiency was achieved under the following conditions: pH 7.0, temperature 30 °C and initial Fe⁻¹ concentration 1,100 mg L⁻¹. Under this optimal condition and with an initial NO(3)(-)-N concentration of 55 mg L⁻¹, this strain could remove NO(3)(-)-N with 90% reduction of NO(3)(-)-N, corresponding to oxidizing Fe⁻¹ with 71% oxidation of Fe⁻¹ after 7 days of incubation. The result of kinetic evaluation indicated that this bacterium showed significant substrate affinity to both NO(3)(-)-N and Fe⁻¹.

Antibiotic resistance genes (ARGs) are emerging microbial hazards threatening human health. Many factors, including urban and agricultural activities and water environment changes, can significantly impact the variations of ARGs. An investigation on the occurrence and variations of ARGs in the Jiulong River was done in this study. The water samples were collected from 16 sites ranging from the upper branch to the river mouth of the Jiulong River, in both low- and high-flow periods. Eleven ARG families were tested and quantified by real-time PCR (SYBR Green) methods, and detection assays were conducted for tetA, tetG, aacC1, strA, ermB, cmlA5, vanA, dfrA1, sulll, blaTEM-1 and blaoxa-1 genes. Results showed that nine ARG families were found, then the swine industry and urban activities, including sewage discharge, might be responsible for the high levels of concentrations and relative abundances of ARGs, and the increase of salinity might decrease the relative abundances of ARGs. In addition, some ARG abundances were significantly correlated to the concentrations of NH4+ and PO4(3-), particularly in the high-flow period. The human activities were important sources for ARGs in the Jiulong River, which have already become a threat to the safety of drinking water for the nearby cities.

A comprehensive investigation was made in this study on the variation of dissolved organic nitrogen (DON) during a whole backwashing cycle of the biofiltration for drinking water treatment. In such a cycle, the normalized DON concentration (C(effluent)/C(influent)) was decreased from 0.98 to 0.90 in the first 1.5h, and then gradually increased to about 1.5 in the following 8h. Finally, it remained stable until the end of this 24-hour cycle. This clearly 3-stage profile of DON could be explained by three aspects as follows: (1) the impact of the backwashing on the biomass and the microbial activity; (2) the release of soluble microbial products (SMPs) during the biofiltration; (3) the competition between heterotrophic bacteria and nitrifying bacteria. All the facts supported that more DON was generated during later part of the backwashing cycle. The significance of the conclusion is that the shorter backwashing intervals between backwashing for the drinking water biofilter should further decrease the DON concentration in effluent of biofilter., (Crown Copyright © 2011. Published by Elsevier B.V. All rights reserved.)