Search

Sodium (Na) metal anodes receive significant attention due to their high theoretical specific energy and cost-effectiveness. However, the high reactivity of Na foil anodes and the irregular surfaces have posed challenges to the operability and reliability of Na metals in battery applications. In the absence of inert environmental protection conditions, constructing a uniform, dense, and sodiophilic Na metal anode surface is crucial for homogenizing Na deposition, but remains less-explored. Herein, we fabricated a Tin (Sn) nanoparticle-assembled film conforming to separator pores, which provided ample space for accommodating volumetric expansion during the Na alloying process. Subsequently, a seamless Na-Sn alloy overlayer was formed and transferred onto the Na foil during Na plating through a separator-assisted technique, thereby overcoming conventional operational limitations of metallic Na. As compared to traditional volumetrically expanded cracked ones, the present autotransferable, highly sodiophilic, ion-conductive, and seamless Na-Sn alloy overlayer serves as uniform nucleation sites, thereby reducing nucleation and diffusion barriers and facilitating the compact deposition of metallic Na. Consequently, the autotransferable alloy layer enables a high average Coulombic efficiency of 99.9 % at 3.0 mA cm -2 and 3.0 mAh cm -2 in the half cells as well as minimal polarization overpotentials in symmetric cells, both during prolonged cycling 1200 h. Furthermore, the assembled Na||Sn-1.0h-PP||Na 3 V 2 (PO 4 ) 3 @C@CNTs full cell delivers high capacity retention of 97.5 % after 200 cycles at a high cathodic mass loading., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Maintaining proper flower size is vital for plant reproduction and adaption to the environment. Petal size is determined by spatiotemporally regulated cell proliferation and expansion. However, the mechanisms underlying the orchestration of cell proliferation and expansion during petal growth remains elusive. Here, we determined that the transition from cell proliferation to expansion involves a series of distinct and overlapping processes during rose (Rosa hybrida) petal growth. Changes in cytokinin content were associated with the transition from cell proliferation to expansion during petal growth. RNA sequencing identified the AP2/ERF transcription factor gene RELATED TO AP2 4-LIKE (RhRAP2.4L), whose expression pattern positively associated with cytokinin levels during rose petal development. Silencing RhRAP2.4L promoted the transition from cell proliferation to expansion and decreased petal size. RhRAP2.4L regulates cell proliferation by directly repressing the expression of KIP RELATED PROTEIN 2 (RhKRP2), encoding a cell cycle inhibitor. In addition, we also identified BIG PETALub (RhBPEub) as another direct target gene of RhRAP2.4L. Silencing RhBPEub decreased cell size, leading to reduced petal size. Furthermore, the cytokinin signaling protein ARABIDOPSIS RESPONSE REGULATOR 14 (RhARR14) activated RhRAP2.4L expression to inhibit the transition from cell proliferation to expansion, thereby regulating petal size. Our results demonstrate that RhRAP2.4L performs dual functions in orchestrating cell proliferation and expansion during petal growth., Competing Interests: Conflict of interest statement. None declared., (© The Author(s) 2023. Published by Oxford University Press on behalf of American Society of Plant Biologists. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.)

Deep multiview clustering (MVC) is to learn and utilize the rich relations across different views to enhance the clustering performance under a human-designed deep network. However, most existing deep MVCs meet two challenges. First, most current deep contrastive MVCs usually select the same instance across views as positive pairs and the remaining instances as negative pairs, which always leads to inaccurate contrastive learning (CL). Second, most deep MVCs only consider learning feature or cluster correlations across views, failing to explore the dual correlations. To tackle the above challenges, in this article, we propose a novel deep MVC framework by pseudo-label guided CL and dual correlation learning. Specifically, a novel pseudo-label guided CL mechanism is designed by using the pseudo-labels in each iteration to help removing false negative sample pairs, so that the CL for the feature distribution alignment can be more accurate, thus benefiting the discriminative feature learning. Different from most deep MVCs learning only one kind of correlation, we investigate both the feature and cluster correlations among views to discover the rich and comprehensive relations. Experiments on various datasets demonstrate the superiority of our method over many state-of-the-art compared deep MVCs. The source implementation code will be provided at https://github.com/ShizheHu/Deep-MVC-PGCL-DCL.

High electrochemical reversibility is required for the application of high-energy-density lithium (Li) metal batteries; however, inactive Li formation and SEI (solid electrolyte interface)-instability-induced electrolyte consumption cause low Coulombic efficiency (CE). The prior interfacial chemical designs in terms of alloying kinetics have been used to enhance the CE of Li metal anode; however, the role of its redox chemistry at heterointerfaces remains a mystery. Herein, the relationship between heterointerfacial redox chemistry and electrochemical transformation reversibility is investigated. It is demonstrated that the lower redox potential at heterointerface contributes to higher CE, and this enhancement in CE is primarily due to the regulation of redox chemistry to Li deposition behavior rather than the formation of SEI films. Low oxidation potential facilitates the formation of the surface with the highly electrochemical binding feature after Li stripping, and low reduction potential can maintain binding ability well during subsequent Li plating, both of which homogenize Li deposition and thus optimize CE. In particular, Mg hetero-metal with ultra-low redox potential enables Li metal anode with significantly improved CE (99.6%) and stable cycle life for 700 cycles at 3.0 mA cm -2 . This work provides insight into the heterointerfacial design principle of next-generation negative electrodes for highly reversible metal batteries., Competing Interests: Competing interests statement:The authors declare no competing interest.

Metal-sulfur batteries exhibit great potential as next-generation rechargeable batteries due to the low sulfur cost and high theoretical energy density. Sodium-sulfur (Na-S) batteries present higher feasibility of long-term development than lithium-sulfur (Li-S) batteries in technoeconomic and geopolitical terms. Both lithium and sodium are alkali metal elements with body-centered cubic structures, leading to similar physical and chemical properties and exposing similar issues when employed as the anode in metal-sulfur batteries. Indeed, some inspiration for mechanism researches and strategies in Na-S systems comes from the more mature Li-S systems. However, the dissimilarities in microscopic characteristics determine that Na-S is not a direct Li-S analogue. Herein, the daunting challenges derived by the differences of fundamental characteristics in Na-S and Li-S systems are discussed. And the corresponding strategies in Na-S batteries are reviewed. Finally, general conclusions and perspectives toward the research direction are presented based on the dissimilarities between both systems. This review attempts to provide important insights to facilitate the assimilation of the available knowledge on Li-S systems for accelerating the development of Na-S batteries on the basis of their dissimilarities., (© 2022 Wiley-VCH GmbH.)

Lithium-sulfur (Li-S) batteries are regarded as the most promising next-generation energy storage systems due to their high energy density and cost-effectiveness. However, their practical applications are seriously hindered by several inevitable drawbacks, especially the shuttle effects of soluble lithium polysulfides (LiPSs) which lead to rapid capacity decay and short cycling lifespan. This review specifically concentrates on the shuttle path of LiPSs and their interaction with the corresponding cell components along the moving way, systematically retrospect the recent advances and strategies toward polysulfides diffusion suppression. Overall, the strategies for the shuttle effect inhibition can be classified into four parts, including capturing the LiPSs in the sulfur cathode, reducing the dissolution in electrolytes, blocking the shuttle channels by functional separators, and preventing the chemical reaction between LiPSs and Li metal anode. Herein, the fundamental aspect of Li-S batteries is introduced first to give an in-deep understanding of the generation and shuttle effect of LiPSs. Then, the corresponding strategies toward LiPSs shuttle inhibition along the diffusion path are discussed step by step. Finally, general conclusions and perspectives for future research on shuttle issues and practical application of Li-S batteries are proposed., (© 2022 The Authors. Advanced Science published by Wiley-VCH GmbH.)

As a result of the difficulties brought by COVID-19 and its associated lockdowns, many individuals and companies have turned to robots in order to overcome the challenges of the pandemic. Compared with traditional human labor, robotic and autonomous systems have advantages such as an intrinsic immunity to the virus and an inability for human-robot-human spread of any disease-causing pathogens, though there are still many technical hurdles for the robotics industry to overcome. This survey comprehensively reviews over 200 reports covering robotic systems which have emerged or have been repurposed during the past several months, to provide insights to both academia and industry. In each chapter, we cover both the advantages and the challenges for each robot, finding that robotics systems are overall apt solutions for dealing with many of the problems brought on by COVID-19, including: diagnosis, screening, disinfection, surgery, telehealth, care, logistics, manufacturing and broader interpersonal problems unique to the lockdowns of the pandemic. By discussing the potential new robot capabilities and fields they applied to, we expect the robotics industry to take a leap forward due to this unexpected pandemic., (This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License. For more information, see https://creativecommons.org/licenses/by-nc-nd/4.0/.)

To establish a new model for estimating ground-level PM2.5 concentration over Beijing, China, the relationship between aerosol optical depth (AOD) and ground-level PM2.5 concentration was derived and analysed firstly. Boundary layer height (BLH) and relative humidity (RH) were shown to be two major factors influencing the relationship between AOD and ground-level PM2.5 concentration. Thus, they are used to correct MODIS AOD to enhance the correlation between MODIS AOD and PM2.5. When using corrected MODIS AOD for modelling, the correlation between MODIS AOD and PM2.5 was improved significantly. Then, normalized difference vegetation index (NDVI), surface temperature (ST) and surface wind speed (SPD) were introduced as auxiliary variables to further improve the performance of the corrected regression model. The seasonal and annual average distribution of PM2.5 concentration over Beijing from 2014 to 2016 were mapped for intuitively analysing. Those can be regarded as important references for monitoring the ground-level PM2.5 concentration distribution. It is obviously that the PM2.5 concentration distribution over Beijing revealed the trend of "southeast high and northwest low", and showed a significant decrease in annual average PM2.5 concentration from 2014 to 2016., Competing Interests: The authors have declared that no competing interests exist.

Silicon nanoparticles (SiNPs) with a median size of 51 nm are prepared by the sand mill from waste silicon, and then carbon-interweaved SiNPs/graphite anode materials are designed. Because of the size of SiNPs is restricted below a critical fracture size of 150 nm as well as the rational decoration of carbon and graphite, fracture of SiNPs, and volume deformation of active materials are highly alleviated, leading to low impedance, enhanced electrochemical reaction kinetics, and good electronic connection between active materials and current collector. Furthermore, delithiation reversibility of the formed crystalline Li 15 Si 4 alloy is enhanced. As a result, the anode with 10.5 wt % content of Si (including SiO x ) delivers a properly high initial reversible capacity of 505 mA h g -1 , high cycling stability with capacity retentions of 86.3%, and 91.5% at 0.1 and 1 A g -1 after 500 cycles, respectively. After cycling at a series of higher current densities, the reversible capacity recovers to the original level completely (100% recovery) when the current density is set back to the original value, exhibiting outstanding rate performance. The results indicate that the silicon-carbon anode can achieve high cycling performances with enhanced delithiation reversibility of the formed crystalline Li 15 Si 4 alloy by restricting size of SiNPs and decoration of carbon materials, which are discussed systematically. The SiNPs are recycled from waste Si, and synthetic strategy of anode materials is very facile, cost-effective, and nontoxic, which has potential for industrial production.