Search

To evaluate the impact of nutritional tea polyphenols (TPs) on body composition, growth, biochemical markers, antioxidant capacity, and hemato-immunological levels, a ten-week feeding experiment was carried out on coho salmon ( Oncorhynchus kisutch , 180.51 ± 0.15 g). The control group was fed a basal diet; the T1, T2, T3, and T4 groups were fed 0.005%, 0.01%, 0.02%, and 0.04% TPs, respectively. These results demonstrate that adding TPs significantly ( p < 0.05) increased the coho salmon fish's weight gain (WG), relative growth rate (RGR), condition factor (CF), feed efficacy (FE), daily growth rate (DGR), and specific growth rate (SGR). There was no discernible difference in the body compositions of the treated TPs and the control group ( p > 0.05). In addition, the T3 group showed a significant ( p < 0.05) decrease in GPT, LDL, HDL, TC, and CAT. Fish given a 0.02% diet containing TPs had significantly lower levels of malondialdehyde (MDA) in their liver; yet, the TP-treated groups had higher levels of SOD and CAT than the control ( p < 0.05). The data analysis shows a significant rise in lysozyme, respiratory burst activity, bactericidal activity, and blood hematological parameters in the 0.01-0.04% TP groups. According to these findings, TPs could be a useful dietary supplement for raising the antioxidant status, growth parameters, haemato-immunological response, and whole-body composition of coho salmon fish.

The suitable dietary L-lysine concentration for coho salmon ( Oncorhynchus kisutch ) alevins was assessed by a dose response feeding trial. Six experimental diets were made with graded L-lysine concentrations of 2.29%, 2.81%, 3.32%, 3.80%, 4.27%, and 4.78% of the dry matter, respectively, each of which was fed to triplicate groups of 100 alevins (initial body weight: 0.30 ± 0.01 g) in 18 plastic baskets (water volume 240 L). The alevins were cultured in a flowing freshwater system and fed manually to apparent satiation four times a day for 12 weeks. The survival rate of alevins did not differ significantly among the dietary groups. The specific growth rate (SGR), protein efficiency ratio (PER), and body protein deposition (BPD) increased significantly ( p < 0.05) with the increase in dietary lysine concentration up to 3.80% and then reduced as lysine level further increased. The feed conversion ratio (FCR) had an inverse trend to SGR. The whole-body crude protein content of the alevins increased significantly with increasing dietary lysine level, while crude lipid content showed the opposite trend. In comparison, the contents of morphological indices, whole-body moisture, and ash were not affected significantly ( p > 0.05) by the different dietary lysine concentrations. The highest contents of lysine, arginine, and total essential amino acids (EAAs) were observed in the group with 4.27% dietary lysine concentration, which did not differ significantly from those in the 3.32%, 3.80%, and 4.78% groups but was significantly higher than those in the 2.29% and 2.81% groups. Similarly, valine had the highest content in the group with 4.78%. The variations in dietary lysine had no significant impacts on other EAA and non-EAA contents except glycine, which increased with increasing dietary lysine level. Second-order polynomial model analyses based on SGR, PER, BPD, and FCR evaluated the optimum L-lysine requirements of coho salmon alevins as 3.74%, 3.73%, 3.91%, and 3.77% of the diet or 6.80%, 6.78%, 7.11%, and 6.85% of dietary proteins, respectively.

The present study evaluated the effects of partially substituting fish meal (FM) with poultry by-product meal (PBPM) on the growth, muscle composition, and tissue biochemical parameters of coho salmon ( Oncorhynchus kisutch ) post-smolts. Five isonitrogenous (7.45% nitrogen) and isoenergetic (18.61 MJ/kg gross energy) experimental diets were made by substituting 0%, 10%, 20%, 40%, and 60% FM protein with PBPM protein, which were designated accordingly as PBPM0 (the control), PBPM10, PBPM20, PBPM40, and PBPM60, respectively. Each diet was fed to triplicates of ten post-smolts (initial individual body weight, 180.13 ± 1.32 g) in three floating cages three times daily (6:50, 11:50, and 16:50) to apparent satiation for 84 days. Both specific growth rate (SGR) and protein efficiency ratio did not differ significantly ( p > 0.05) among the control, PBPM10, and PBPM20 groups, which were remarkably ( p < 0.05) higher than those of the PBPM40 and PBPM60 groups. Feed conversion ratio varied inversely with SGR. The PBPM replacement had no remarkable effects on the morphological indices and proximal muscle components. The control and PBPM10 groups led to significantly higher muscle contents of leucine, lysine, and methionine than groups of higher PBPM inclusion. The groups of PBPM40 and PBPM60 obtained significantly ( p < 0.05) higher serum alanine aminotransferase and aspartate aminotransferase activities than the control and low PBPM inclusion groups. The control group had significantly higher albumin and total cholesterol contents than the groups with PBPM inclusion. The control group had significantly higher triglycerides content than the PBPM60 group. The PBPM60 group had significantly lower contents of high-density lipoprotein, low-density lipoprotein, and total protein than the control and PBPM10 groups. The high PBPM replacement level up to 40% and 60% had adverse effects on hepatic malondialdehyde levels. The catalase and superoxide dismutase activities were not affected by low PBPM inclusion, but significantly decreased in high-PBPM-inclusion groups. Based on broken-line regression analysis of SGR and PER, the optimum dietary PBPM replacing level was evaluated to be 16.63-17.50% of FM protein for coho salmon post-smolts.

A 12-week feeding trial aimed to evaluate the effects of dietary linoleic acid (LA, 18:2n-6) on the growth performance, fatty acid profile, and lipid metabolism enzyme activities of coho salmon (Oncorhynchus kisutch) alevins. Six experimental diets (47% crude protein and 15% crude lipid) were formulated to contain graded LA levels of 0.11%, 0.74%, 1.37%, 2.00%, 2.63%, and 3.26%. Each diet was fed to triplicate groups of 50 alevins with an initial body weight of 0.364 ± 0.002 g, which were randomly assigned to 18 white plastic tanks (0.8 × 0.6 × 0.6 m, 240 L/tank). Fish were reared in a freshwater flow-through rearing system and fed to apparent satiation four times daily. The survival rate was not significantly different among the treatments (p > 0.05). However, the 1.37% LA group significantly improved the final body weight and specific growth rate (SGR) (p < 0.05) of alevins. The feed conversion ratio (FCR) in the 1.37% LA group was significantly lower than those in other groups (p < 0.05). The whole-body lipid content significantly decreased (p < 0.05) with dietary LA levels increasing from 0.74% to 2.00%. The fatty acid composition of the total lipid in muscle was closely correlated with those in the diets. The dietary LA level of 1.37% led to significantly higher activities of liver lipoprotein lipase (LPL) and hepatic lipase (HL) than those of other groups (p < 0.05). Hepatic malate dehydrogenase (MDH) and fatty acid synthase (FAS) decreased with the increase in the dietary LA levels from 0.11% to 1.37%. The lowest MDH and FAS activities were obtained in the 1.37% LA group (p < 0.05). This study indicated that an appropriate amount of dietary LA was beneficial for the growth and lipid metabolism of coho salmon alevins, and the results of the quadratic regression analysis of the SGR and FCR indicated that the optimal dietary LA requirements were 1.25% and 1.23% for coho salmon alevins, respectively.

Due to their outstanding optical properties and superior charge carrier mobilities, organometal halide perovskites have been widely investigated in photodetection and solar cell areas. In perovskites photodetection devices, their high optical absorption and excellent quantum efficiency contribute to the responsivity, even the specific detectivity. In this work, we developed a lateral phototransistor based on mesoscopic graphene/perovskite heterojunctions. Graphene nanowall shows a porous structure, and the spaces between graphene nanowall are much appropriated for perovskite crystalline to mount in. Hot carriers are excited in perovskite, which is followed by the holes' transfer to the graphene layer through the interfacial efficiently. Therefore, graphene plays the role of holes' collecting material and carriers' transporting channel. This charge transfer process is also verified by the luminescence spectra. We used the hybrid film to build phototransistor, which performed a high responsivity and specific detectivity of 2.0 × 10 3 A/W and 7.2 × 10 10 Jones, respectively. To understand the photoconductive mechanism, the perovskite's passivation and the graphene photogating effect are proposed to contribute to the device's performance. This study provides new routes for the application of perovskite film in photodetection.

Solid-state nanopores are considered an attractive basis for single-molecule DNA sequencing. At present, one obstacle to be overcome is the improvement of their temporal resolution, with the DNA molecules remaining in the sensing volume of the nanopore for a long period of time. Here, we used a composite system of a concentration gradient of LiCl in solution and a nanofiber mesh to slow the DNA perforation speed. Compared to different alkali metal solutions with the same concentration, LiCl can extend the dwell time to 20 ms, five times longer than NaCl and KCl. Moreover, as the concentration gradient increases, the dwell time can be tuned from dozens of milliseconds to more than 100 ms. When we introduce a nanofiber mesh layer on top of the pore in the asymmetric solution, the DNA molecules get retarded by 162-185 [Formula: see text]s/nt, which is three orders of magnitude slower than the bare nanopore. At the same time, because the molecule absorption region becomes larger at the pore vicinity, the higher molecule capture rate improves the detection efficiency.

We demonstrate a flexible biosensor for lactate detection based on l-lactate oxidase immobilized by chitosan film cross-linked with glutaraldehyde on the surface of a graphene nanowall (GNW) electrode. The oxygen-plasma technique was developed to enhance the wettability of the GNWs, and the strength of the sensor's oxidation response depended on the concentration of lactate. First, in order to eliminate interference from other substances, biosensors were primarily tested in deionized water and displayed good electrochemical reversibility at different scan rates (20-100 mV s -1 ), a large index range (1.0 μM to 10.0 mM) and a low detection limit (1.0 μM) for lactate. Next, these sensors were further examined in phosphate buffer solution (to mimick human body fluids), and still exhibited high sensitivity, stability and flexibility. These results show that the GNW-based lactate biosensors possess important potential for application in clinical analysis, sports medicine and the food industry.

Two-dimensional molybdenum disulfide (MoS 2 ) is a promising material for ultrasensitive photodetectors owing to its tunable band gap and high absorption coefficient. However, controlled synthesis of high-quality, large-area monolayer molybdenum disulfide (MoS 2 ) is still a challenge in practical application. In this work, we report a gold foil assistant chemical vapor deposition method for the synthesis of large-size (>400 μm) single-crystal MoS 2 film on a silicon dioxide (SiO 2 ) substrate. The influence of Au foil in enlarging the size of single-crystal MoS 2  is investigated systemically using thermal simulation in Ansys workbench 16.0, including thermal conductivity, temperature difference and thermal relaxation time of the interface of SiO 2 substrate and Au foil, which indicate that Au foil can increase the temperature of the SiO 2 substrate rapidly and decrease the temperature difference between the oven and substrate. Finally, the properties of the monolayer MoS 2 film are further confirmed using back-gated field-effect transistors: a high photoresponse of 15.6 A W -1 and a fast photoresponse time of 100 ms. The growth techniques described in this study could be beneficial for the development of other atomically thin two-dimensional transition metal dichalcogenide materials.

We demonstrate a highly stretchable electronic skin (E-skin) based on the facile combination of microstructured graphene nanowalls (GNWs) and a polydimethylsiloxane (PDMS) substrate. The microstructure of the GNWs was endowed by conformally growing them on the unpolished silicon wafer without the aid of nanofabrication technology. Then a stamping transfer method was used to replicate the micropattern of the unpolished silicon wafer. Due to the large contact interface between the 3D graphene network and the PDMS, this type of E-skin worked under a stretching ratio of nearly 100%, and showed excellent mechanical strength and high sensitivity, with a change in relative resistance of up to 6500% and a gauge factor of 65.9 at 99.64% strain. Furthermore, the E-skin exhibited an obvious highly sensitive response to joint movement, eye movement and sound vibration, demonstrating broad potential applications in healthcare, body monitoring and wearable devices.

Conformal graphene films have directly been synthesized on the surface of grating microstructured quartz substrates by a simple chemical vapor deposition process. The wonderful conformality and relatively high quality of the as-prepared graphene on the three-dimensional substrate have been verified by scanning electron microscopy and Raman spectra. This conformal graphene film possesses excellent electrical and optical properties with a sheet resistance of <2000 Ω·sq(-1) and a transmittance of >80% (at 550 nm), which can be attached with a flat graphene film on a poly(dimethylsiloxane) substrate, and then could work as a pressure-sensitive sensor. This device possesses a high-pressure sensitivity of -6.524 kPa(-1) in a low-pressure range of 0-200 Pa. Meanwhile, this pressure-sensitive sensor exhibits super-reliability (≥5000 cycles) and an ultrafast response time (≤4 ms). Owing to these features, this pressure-sensitive sensor based on 3D conformal graphene is adequately introduced to test wind pressure, expressing higher accuracy and a lower background noise level than a market anemometer.