Search

Purpose: To investigate the nasal cycle (NC) during sleep in healthy individuals without nasal obstruction or obstructive sleep apnoea via a flexible wearable respiratory monitoring system in a continuous and real-time manner., Methods: NC during sleep was continuously measured in 30 healthy individuals (15 women, 15 men) via long-term sleep respiratory monitoring system, while sleep stage and body position were simultaneously recorded via polysomnography (PSG). The number of NC transitions and positional changes were documented each night. Additionally, time intervals between NC transitions and their closest positional changes during sleep were meticulously recorded to investigate potential correlations between them., Results: A total of 86.7% of the participants displayed the classic NC, with a mean duration of 6.43 ± 2.33 h. Nightly observations revealed an average occurrence of 2.19 ± 0.40 NC transitions, predominantly occurring during REM stage (68.4%), and 9.15 ± 7.77 postural changes. Analysis of the intervals between NC transitions and positional changes revealed an average absolute value of 27.72 ± 10.85 min, with a substantial 56.4% exceeding 30 min, indicating a non-obvious sequence order among them., Conclusion: NC can be measured in a continuous and real-time manner, the transitions occur mainly during the REM stage. However, we have not identified a clear correlation between NC transition and positional change., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Background: NO 2 - and S 2- are two kinds of common toxic anions widely distributed in environmental water, soil and food products. Human beings have suffered a lot of diseases from intake of excessive NO 2 - or S 2- , i.e., infantile methemoglobin, cancer and even to death. Although tremendous efforts have been afforded to monitor NO 2 - and S 2- , most were high instrument-depended with complex processing procedures. To keep food safety and to protect human health, it will be a huge challenge to develop a convenient and efficient way to monitor S 2- and NO 2 - in practice., Results: A kind of folic acid capping Bi 3+ -doped Ag quantum dots (FA@Bi 3+ -Ag QDs) was developed for the first time by one-pot homogeneous reduced self-assembly. Not only did FA@Bi 3+ -Ag QDs possess intrinsic fluorescent property, it expressed synergistic peroxidase-like activity to catalyze the redox of 3,3',5,5'-tetramethylbenzidine (TMB) and H 2 O 2 with K m /v max of 0.087 mM/6.61 × 10 -8  M s -1 and 6.42 mM/6.25 × 10 -7  M s -1 respectively. Interestingly, trace S 2- could exclusively alter its fluorescent property and peroxidase-like activity, exhibiting significant hypochromic and "turn-on" fluorescent effects. While trace NO 2 - could make FA@Bi 3+ -Ag QDs-TMB-H 2 O 2 system hyperchromic. Under the optimized conditions, FA@Bi 3+ -Ag QDs were applied for dual-mode recognition of S 2- and visual sensing of NO 2 - in real food samples with satisfactory recoveries, i.e., 100.7-107.9 %/95.8-104.7 % and 97.2-104.8 % respectively. The synergistic enzyme-mimic mechanism of FA@Bi 3+ -Ag QDs and its selective response mechanisms to S 2- and NO 2 - were also proposed., Significance: This represents the first nanozyme-based FA@Bi 3+ -Ag QDs system for dual-mode recognition of S 2- and visual sensing of NO 2 - , well meeting the basic requirement in drinking water set by WHO. It will offer a promising way for multi-mode monitoring of different pollution using the same nanozyme-based sensor., Competing Interests: Declaration of competing interest The authors declare no competing financial interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Polymer nanocomposites with tuning functions are exciting candidates for various applications, and most current research has focused on static mechanical reinforcement. Actually, under service conditions of complex dynamic interference, stable dynamic mechanical properties with high energy dissipation become more critical. However, nanocomposites often exhibit a trade-off between static and dynamic mechanics, because of their contradictory underlying physics between chain crosslinking and chain relaxation. Here, we report a general strategy for constructing ultra-stable dynamic mechanical complex fluid nanocomposites with high energy dissipation by infusing complex fluids into the nanoconfined space. The key is to tailor full-scale polymer dynamics across an exceptionally broad timescale by single-chain confinement. These materials exhibit stable storage modulus (10 0  ~ 10 2   MPa) with high energy dissipation (loss factor > 0.4) over a broad frequency range (10 -1  ~ 10 7   Hz)/temperature range (-35 ~ 85°C). In the loss factor > 0.4 region, their dynamic mechanical stability (rate of modulus change versus temperature (k)) is 10 times higher than that of conventional polymer nanocomposites., (© 2024. The Author(s).)

(1) Background: At present, the only potency assay approved in China for the in-country testing of botulinum toxin type A for injection products is the mouse bioassay (MBA). The Chinese market for neurotoxin products is rapidly expanding, but MBAs are subject to high variability due to individual variations in mice, as well as variations in injection sites, in addition to the limited number of batches tested for one MBA. Compared with the mLD 50 method, the cell-based potency assay (CBPA) developed for the potency testing of onabotulinumtoxinA (BOTOX) by AbbVie not only does not use any experimental animals but also allows for significant time and cost savings. Due to the significant benefits conferred by the replacement of the mLD 50 assay with CBPA in China, the CBPA method has been transferred, validated, and cross-validated to demonstrate the equivalence of the two potency methods. (2) Methods: The differentiated SiMa cells were treated with both BOTOX samples and the reference standard, and the cleaved SNAP25 197 in the cell lysates was quantified using Chemi-ECL ELISA. A 4-PL model was used for the data fit and sample relative potency calculation. The method accuracy, linearity, repeatability, and intermediate precision were determined within the range of 50% to 200% of the labeled claim. A statistical equivalence of the two potency methods (CBPA and mLD 50 ) was initially demonstrated by comparing the AbbVie CBPA data with NIFDC mLD 50 data on a total of 167 commercial BOTOX lots (85 50U lots and 82 100U lots). In addition, six lots of onabotulinumtoxinA (three 50U and three 100U) were re-tested as cross-validation by these two methods for equivalence. (3) Results: The overall assay's accuracy and intermediate precision were determined as 104% and 9.2%, and the slope, R-square, and Y-intercept for linearity were determined as 1.071, 0.998, and 0.036, respectively. The repeatability was determined as 6.9%. The range with the acceptable criteria of accuracy, linearity, and precision was demonstrated as 50% to 200% of the labeled claim. The 95% equivalence statistic test using margins [80%, 125%] indicates that CBPA and mLD 50 methods are equivalent for both BOTOX strengths (i.e., 50U and 100U). The relative potency data from cross-validation were within the range of ≥80% to ≤120%. (4) Conclusions: The CBPA meets all acceptance criteria and is equivalent to mLD 50 . The replacement of mLD 50 with CBPA is well justified in terms of ensuring safety and efficacy, as well as for animal benefits.

Activated carbon (AC)-based materials have shown promising performance in carbon capture, offering low cost and sustainable sourcing from abundant natural resources. Despite ACs growing as a new class of materials, theoretical guidelines for evaluating their viability in carbon capture are a crucial research gap. We address this gap by developing a hierarchical guideline, based on fundamental gas-solid interaction strength, that underpins the success and scalability of AC-based materials. The most critical performance indicator is the CO 2 adsorption energy, where an optimal range (-0.41 eV) ensures efficiency between adsorption and desorption. Additionally, we consider thermal stability and defect sensitivity to ensure consistent performance under varying conditions. Further, selectivity and capacity play significant roles due to external variables such as partial pressure of CO 2 and other ambient air gases (N 2 , H 2 O, O 2 ), bridging the gap between theory and reality. We provide actionable examples by narrowing our options to methylamine- and pyridine-grafted graphene.

Hydrogels with pure hydrophilic network have received much attention due to their excellent low frictional behavior. However, the lubrication performance of hydrogels is not satisfied under high-speed condition due to the energy dissipation caused by adsorbed polymer chains as well as the failure of lubricating mechanisms accompanied by the transition of lubrication regime. In this work, interpenetrating double-network organohydrogels were constructed by combining hydrophilic and oleophilic polymer networks to modify the physiochemical properties of surface polymer chains, especially the chain mobility. The oleophilic polymer network spatially restricting the mobility of the swollen hydrophilic network in water, resulted in a low coefficient of friction (ca. 0.01) compared with conventional hydrogels at high speed (0.1 m s -1 ). Meanwhile, the organohydrogels had superior wear resistance, with almost no wear observed on the sliding track after 5 k cycles of rubbing at high speed. The design concept of organohydrogels can be extended to a variety of low-wear, highly-lubricating materials., (© 2023 Wiley-VCH GmbH.)

Introduction: Adenoid hypertrophy is the main cause of obstructive sleep apnea in children. Previous studies have suggested that pathogenic infections and local immune system disorders in the adenoids are associated with adenoid hypertrophy. The abnormalities in the number and function of various lymphocyte subsets in the adenoids may play a role in this association. However, changes in the proportion of lymphocyte subsets in hypertrophic adenoids remain unclear., Methods: To identify patterns of lymphocyte subsets in hypertrophic adenoids, we used multicolor flow cytometry to analyze the lymphocyte subset composition in two groups of children: the mild to moderate hypertrophy group (n = 10) and the severe hypertrophy group (n = 5)., Results: A significant increase in naïve lymphocytes and a decrease in effector lymphocytes were found in severe hypertrophic adenoids., Discussion: This finding suggests that abnormal lymphocyte differentiation or migration may contribute to the development of adenoid hypertrophy. Our study provides valuable insights and clues into the immunological mechanism underlying adenoid hypertrophy., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2023 Zhu, Wang, Yang, Shen, Wang, Zhang, Zhang, Li, Gao, Liu, Zhu, Wei, Guan, Su, Liu, Gu and Yin.)

For most electrodes fabricated with carbon, transition metal compounds, or conductive polymers, the capacitance may deteriorate with cyclic charging and discharging. Thus, an electrochemically stable supercapacitor has long been pursued by researchers. In this work, the hierarchical structure of balsa wood is preserved in the converted carbon which is used as a supporting framework to fabricate electrodes for supercapacitors. Well-grown carbon nanotubes (CNTs) on interior and exterior surfaces of balsa carbon channels provide two advantages including 1) offering more specific surface area to boost capacitance via electric double layer capacitance and 2) offering more active Fe and Ni sites to participate in the redox reaction to enhance capacitance of the balsa carbon/CNTs electrode. The balsa carbon/CNTs demonstrate an excellent area capacitance of 1940 mF cm -2 . As active sites on Ni and Fe catalysts and inner walls of CNTs are gradually released, the capacitance increases 66% after 4000 charge-discharge cycles. This work brings forward a strategy for the rational design of high-performance biomass carbon coupled with advanced nanostructures for energy storage., (© 2022 Wiley-VCH GmbH.)

Objective: Arsenic trioxide (ATO) has been effectively used for the treatment of hematological malignancies and some solid tumors, while ATO effects were not tested clinically in epithelial ovarian cancer (EOC)., Methods: Patients with primary or secondary platinum-resistant EOC were enrolled from October 2015 to December 2019. Patients were mainly treated with ATO-based combined sequential chemotherapy as follows: Regimen 1 (ATO combined taxanes weekly therapy); Regimen 2 (ATO + taxanes + 5-fluorouracil + adriamycin ± bevacizumab sequential chemotherapy), for 5 patients platinum-free interval >12 months, added oxaliplatin). Prespecified end points in this cohort included confirmed best overall response rate (ORR), disease control rate (DCR), progression-free survival (PFS), overall survival (OS), and safety., Results: A total of 33 patients were enrolled in this study. After a median follow-up time of 22.1 months (range 5.5-42.9 months), ORR was 42% and DCR was 85%. The overall PFS was 9.5 months (range 1-38.4 months). The main side effect was myelosuppression., Conclusions: ATO-based sequential combined chemotherapy is effective for primary and recurrent drug-resistant EOC patients in clinical phase II trials. The associated side effects could be controlled, while further study is needed., Competing Interests: The authors declare that they have no conflicts of interest., (Copyright © 2022 Yingchao Yang et al.)

Purpose: This study aimed to detect the epidemiological relevance between adenoid hypertrophy (AH) and rhinosinusitis, and AH and allergic rhinitis (AR) through an Internet search., Methods: Internet search query data from January 2011 to December 2019 in China were retrieved from the Baidu Index (BI). Spearman's correlation coefficients were used to detect the correlation among the search volumes of AH, rhinosinusitis, and AR. We also collected search data from the first 5 months of 2020, when quarantine was implemented in China due to the coronavirus disease 2019 epidemic. Then, we compared the search data to those obtained during the same period in 2019 to assess the effects of isolation on AH and AR., Results: Statistically significant relevance was found between the search variations of AH and rhinosinusitis during 2011-2019 (R = 0.643, P < 0.05). However, the relationship between AH and AR was weak (R =  - 0.239, P < 0.05) and that between rhinosinusitis and AR (R =  - 0.022, P > 0.05) was not relevant. The average monthly search volume of AH and rhinosinusitis had a strong correlation (R = 0.846, P < 0.01), but AH and AR and rhinosinusitis and AR were not correlated (R = - 0.350, P > 0.05; R = - 0.042, P > 0.05, respectively). AH and rhinosinusitis search volumes decreased consistently during the first 5 months of 2020 (isolation), whereas that for AR increased during January-February., Conclusion: AH had an epidemiological relationship with rhinosinusitis, which was not consistent with AR. The decrease in public gathering effectively reduced the morbidities of AH and rhinosinusitis but not those of AR., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Cyclodextrin metal-organic framework (CD-MOF) as a highly porous supramolecular carrier could be one of the solutions to the insolubility of isosteviol (STV). The solubility of STV was lower than 20.00 ng/mL at pH 1.0 and pH 4.5, whilst its solubility increased to 20,074.30 ng/mL at pH 6.8 and 129.58 ng/mL in water with a significant pH-dependence. The in vitro release profiles of STV from STV@CD-MOF (0.5:1) were pH-independent in distinct pH media and closed to be thoroughly released but no such release profiles were observed for STV@CD-MOF (1:1) owing to nanoclusters formation. The bioavailability of STV@CD-MOF (1:1) in rats was 8.67-fold higher than that of STV, and was 1.32- and 1.27-fold higher than that of STV@CD and STV@CD-MOF (0.5:1). Our results indicated that the inclusion mechanism played a primary role when STV in CD-MOF was at a low loading ratio, while the increasement in bioavailability at a high loading ratio, which was attributed to the nanocluster mechanism. This was confirmed by molecular simulation. In conclusion, CD-MOF is a promising system for STV loading, overcoming the insolubility and to improve the bioavailability of this natural compound., Competing Interests: The authors have no conflicts of interest to declare., (© 2021 Chinese Pharmaceutical Association and Institute of Materia Medica, Chinese Academy of Medical Sciences. Production and hosting by Elsevier B.V.)

If a bulk material can withstand a high load without any irreversible damage (such as plastic deformation), it is usually brittle and can fail catastrophically 1,2 . This trade-off between strength and fracture toughness also extends into two-dimensional materials space 3-5 . For example, graphene has ultrahigh intrinsic strength (about 130 gigapascals) and elastic modulus (approximately 1.0 terapascal) but is brittle, with low fracture toughness (about 4 megapascals per square-root metre) 3,6 . Hexagonal boron nitride (h-BN) is a dielectric two-dimensional material 7 with high strength (about 100 gigapascals) and elastic modulus (approximately 0.8 terapascals), which are similar to those of graphene 8 . Its fracture behaviour has long been assumed to be similarly brittle, subject to Griffith's law 9-14 . Contrary to expectation, here we report high fracture toughness of single-crystal monolayer h-BN, with an effective energy release rate up to one order of magnitude higher than both its Griffith energy release rate and that reported for graphene. We observe stable crack propagation in monolayer h-BN, and obtain the corresponding crack resistance curve. Crack deflection and branching occur repeatedly owing to asymmetric edge elastic properties at the crack tip and edge swapping during crack propagation, which intrinsically toughens the material and enables stable crack propagation. Our in situ experimental observations, supported by theoretical analysis, suggest added practical benefits and potential new technological opportunities for monolayer h-BN, such as adding mechanical protection to two-dimensional devices.

Background: Haem is a key metabolic factor in the life cycle of the malaria parasite. In the blood stage, the parasite acquires host haemoglobin to generate amino acids for protein synthesis and the by-product haem for metabolic use. The malaria parasite can also synthesize haem de novo on its own. Plasmodium falciparum-specific histidine-rich protein 2 (PfHRP2) has a haem-binding site to mediate the formation of haemozoin, a biocrystallized form of haem aggregates. Notably, the gene regulates the mechanism of haemoglobin-derived haem metabolism and the de novo haem biosynthetic pathway in the Pfhrp2-disrupted parasite line during the intraerythrocytic stages., Methods: The CRISPR/Cas9 system was used to disrupt the gene locus of Pfhrp2. DNA was extracted from the transgenic parasite, and PCR, Southern blotting and Western blotting were used to confirm the establishment of transgenic parasites. RNA-sequencing and comparative transcriptome analysis were performed to identify differences in gene expression between 3D7 and Pfhrp2 - -3D7 parasites., Results: Pfhrp2 - transgenic parasites were successfully established by the CRISPR/Cas9 system. A total of 964, 1261, 3138, 1064, 2512 and 1778 differentially expressed genes (DEGs) were identified in the six comparison groups, respectively, with 373, 520, 1499, 353, 1253 and 742 of these DEGs upregulated and 591, 741, 1639, 711, 1259 and 1036 of them downregulated, respectively. Five DEGs related to haem metabolism and synthesis were identified in the comparison groups at six time points (0, 8, 16, 24, 32, and 40 h after merozoite invasion). The genes encoding delta-aminolevulinic acid synthetase and ferrochelatase, both related to haem biosynthesis, were found to be significantly upregulated in the comparison groups, and those encoding haem oxygenase, stromal-processing peptidase and porphobilinogen deaminase were found to be significantly downregulated. No GO terms were significantly enriched in haem-related processes (Q value = 1)., Conclusion: Our data revealed changes in the transcriptome expression profile of the Pfhrp2 - -3D7 parasite during the intraerythrocytic stages. The findings provide insight at the gene transcript level that will facilitate further research on and development of anti-malaria drugs.

The strong force that originates from breaking covalent bonds can be easily quantified through various testing platforms, while weak interfacial sliding resistance (ISR), originating from hydrogen bonding or van der Waals (vdW) forces, is very challenging to measure. Facilitated by an in-house nanomechanical testing system, we are able to precisely quantify and clearly distinguish the interfacial interactions between individual carbon fibers and several substrates governed by either hydrogen bonding or vdW forces. The specific ISR of the interface dominated by vdW forces is 3.55 ± 0.50 μN mm -1 and it surprisingly increases to 157.86 ± 44.18 μN mm -1 if the interface is bridged by hydrogen bonding. The ad hoc studies demonstrate that hydrogen bonding rather than vdW forces has great potential in sewing the interface if both surfaces are supportive of the formation of hydrogen bonds. The findings will enlighten the engineering of interfacial interactions and further mediate the entire mechanical performance of structures., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Objectives: The association between accessory renal artery (ARA) and hypertension remains not fully understood. We observed the association between ARA and clinical characteristics among middle-aged patients with primary hypertension., Methods: One hundred and sixty-two middle-aged (mean 39.82 ± 10.25 years, 58.0% male) patients with primary hypertension were enrolled, and patients underwent Computed Tomography Angiography (CTA) of renal arteries, ambulatory blood pressure monitor (ABPM), echocardiography, physical examination, and routine blood chemistry examinations. According to the CTA results, patients were divided into a non-ARA ( n  = 108) and ARA ( n  = 54) group. Direct renin concentration (DRC), plasma aldosterone concentration (PAC), ABPM, echocardiography, creatinine, and glomerular filtration rate were compared between the two groups., Results: DRC (mU/L) (11.21 (5.34, 20.87) vs. 18.24 (10.32, 33.59), P =0.002) was significantly higher in the ARA group than in the non-ARA group. However, PAC (ng/dL) (98.30 (67.30, 134.00) vs. 116.50 (78.80, 137.25), P =0.103) was similar between these two groups. ABPM (mmHg) results showed that daytime (146.75 ± 17.04/95.86 ± 11.39 vs. 155.50 ± 14.76/100.48 ± 10.69, P < 0.05), night time (133.44 ± 17.50/85.28 ± 12.80 vs. 139.81 ± 14.64/89.83 ± 11.21, P < 0.05), and 24 h blood pressure (143.95 ± 15.99/93.90 ± 11.78 vs. 152.07 ± 13.85/98.11 ± 10.36, P < 0.05) were significantly higher in the ARA group than in the non-ARA group. Accordingly, echocardiographic-derived posterior left ventricular wall thickness value was higher in the ARA group than in the non-ARA group., Conclusion: ARA is related to higher blood pressure and higher direct renin concentration in middle-aged patients with primary hypertension, and these patients deserve stricter blood pressure control. Our results provide important evidence for that ARA is a cause of hypertension and target organs damages., Competing Interests: All authors declare no conflicts of interest., (Copyright © 2020 Kai Kang et al.)

Objectives: Aldosterone-to-plasma renin activity ratio (ARR) derived from traditional radioimmunoassay (RIA) is widely used to detect primary aldosteronism (PA). Recently, aldosterone-to-direct renin concentration ratio (ADRR), which is calculated by direct renin concentration (DRC) measured by chemiluminescent immunoassay (CLIA), is proposed to replace ARR as the screening test method for PA. The purpose of the present study was to estimate the diagnostic accuracy and cutoff value of ADRR as screening test for PA., Methods: 450 hypertensive patients with suspected PA referred to hypertension center of our department were enrolled and underwent screening and confirmatory tests of PA. Plasma renin activity (PRA), DRC, and plasma aldosterone concentration (PAC) were measured by both RIA and CLIA simultaneously during screening and confirmatory test., Results: 386 patients were diagnosed as primary hypertension (PH) and 64 patients as PA. Within-patient correlation between PRA and DRC (r=0.88, P<0.001) and correlation between PAC measured by RIA and CLIA were high (r=0.80, P<0.001). The optimal cutoff value of ADRR was 2.93 (ng/dL)/(mU/L), sensitivity 80.33%, and specificity 92.11%. The optimal cutoff value of ARR was 25.28 (ng/dL)/(ng/mL/h), sensitivity 76.92%, and specificity 93.38%., Conclusion: The optimal cutoff values of ADRR and ARR for screening PA are defined in this patient cohort with high sensitivity and specificity. Our results are of clinical importance for accelerating the extensive use of ADRR as a screening test for PA in daily practice.

Rationale: de Winter electrocardiograph (ECG) pattern signifies proximal left anterior descending coronary artery (LAD) occlusion and extensive anterior myocardial infarction, and it is found in about 2% of patients with proximal LAD occlusion. However, it is often unrecognized by physicians. In this case report, we present a patient with chest pain but showing an atypical and delayed de Winter ECG pattern., Patient Concerns: A previously healthy 61-year-old man attended our emergency department with chest pain radiating to the left arm and back for 4 hours, who was without serious cardiovascular risk factors. ECG at emergency department showed no significant changes. High-sensitivity cardiac troponin I (hs-cTnI) was within normal limit., Diagnosis: At 5 hours after onset, ECG showed significant upsloping ST depression at J point in precordial leads V3 to V6, slight ST elevation in aVR and depression in inferior leads, and hs-cTnI peaked at 2.610 μg/L. The diagnosis of de Winter ECG pattern was confirmed by coronary angiography with an occlusion of the proximal LAD., Interventions: A stent was implanted through percutaneous coronary intervention., Outcomes: The patient's chest pain was relieved without further increase of hs-cTnI. ECG after procedure showed ST segment back to baseline in leads V4 to V6, but persistent ST elevation in V1 to V3 with QS or Q wave., Lessons: Timely diagnosis of de Winter ECG pattern is very important, especially the atypical and delayed ECG changes. It should be treated as ST elevation myocardial infarction equivalent and deserves emergent revascularization therapy.

Perfect graphene is believed to be one of the strongest materials, yet its resistance to fracture is much less impressive. The modest fracture toughness is thought to be related to the general brittle nature in the fracture process of graphene and its two-dimensional (2D) analogous. The brittleness also makes it extremely difficult to assess mechanical properties of 2D materials. The introduction of carbon nanotubes (CNTs) into bulk materials has proven to be a widely accepted method for toughening and strengthening materials. To date, such toughening effect of CNTs on 2D materials is largely unknown. A unique material, rebar graphene, has been synthesized that consists of CNTs embedded in graphene. In this study, by implementing a "dry" transfer technique, the freely suspended rebar graphene was systematically tested under uniaxial tension mode inside a scanning electron microscope. Our combined experiments and molecular dynamics simulations confirm that the embedded CNTs divert and bridge the propagating crack and provide a toughening mechanism for the material. Our work identifies a promising extrinsic toughening strategy for 2D materials and provides mechanistic insights into the fracture process of graphene hybrid material.

The electrical behaviors under mechanical deformation of an aligned single-walled carbon nanotube (SWCNT) film nanocomposite have been systematically investigated in this work. Electrical signals along the CNT axis (‖) and perpendicular to the CNT axis (⊥) follow a specific pattern, which enables the mechanical motion to be determined by vector analysis of such signals. The unique electrical behaviors of the sandwiched nanocomposites originate from the anisotropic characteristics of the CNT films. By combining in situ mechanical investigation with a coarse-grained molecular dynamics simulation, the shearing effect between SWCNTs is found to play a key role in stress-transfer along the ‖ direction, resulting in arc-shape cracks, while the peeling effect is dominant along the ⊥ direction, leading to unifom SWCNT bar bridging at cracks. The fabricated CNT based sandwiched nanocomposite is believed to have great potential in building flexible all-direction sensors.

There is a longstanding challenge to disperse metal nanoparticles uniformly in bulk polymers for widespread applications. Conventional scale-down techniques often are only able to shrink larger elements (such as microparticles and microfibers) into micro/nano-elements (i.e. nanoparticles and nanofibers) without much altering their relative spatial and size distributions. Here we show an unusual phenomenon that tin (Sn) microparticles with both poor size distribution and spatial dispersion were stretched into uniformly dispersed and sized Sn nanoparticles in polyethersulfone (PES) through a stack and draw technique in thermal drawing. It is believed that the capillary instability plays a crucial role during thermal drawing. This novel, inexpensive, and scalable method overcomes the longstanding challenge to produce bulk polymer-metal nanocomposites (PMNCs) with a uniform dispersion of metallic nano-elements.

Graphene/hexagonal boron nitride ( h -BN) monolayer in-plane heterostructure offers a novel material platform for both fundamental research and device applications. To obtain such a heterostructure in high quality via controllable synthetic approaches is still challenging. In this work, in-plane epitaxy of graphene/ h -BN heterostructure is demonstrated on Cu-Ni substrates. The introduction of nickel to copper substrate not only enhances the capability of decomposing polyaminoborane residues but also promotes graphene growth via isothermal segregation. On the alloy surface partially covered by h -BN, graphene is found to nucleate at the corners of the as-formed h -BN grains, and the high growth rate for graphene minimizes the damage of graphene-growth process on h -BN lattice. As a result, high-quality graphene/ h -BN in-plane heterostructure with epitaxial relationship can be formed, which is supported by extensive characterizations. Photodetector device applications are demonstrated based on the in-plane heterostructure. The success will have important impact on future research and applications based on this unique material platform.

Hierarchically organized three-dimensional (3D) carbon nanotubes/graphene (CNTs/graphene) hybrid nanostructures hold great promises in composite and battery applications. Understanding the junction strength between CNTs and graphene is crucial for utilizing such special nanostructures. Here, in situ pulling an individual CNT bundle out of graphene is carried out for the first time using a nanomechanical tester developed in-house, and the measured junction strength of CNTs/graphene is 2.23 ± 0.56 GPa. The post transmission electron microscopy (TEM) analysis of remained graphene after peeling off CNT forest confirms that the failure during pull-out test occurs at the CNT-graphene junction. Such a carefully designed study makes it possible to better understand the interfacial interactions between CNTs and graphene in the 3D CNTs/graphene nanostructures. The coupled experimental and computational effort suggests that the junction between the CNTs and the graphene layer is likely to be chemically bonded, or at least consisting of a mixture of chemical bonding and van der Waals interactions.

An in situ quantitative tensile testing platform is developed to enable the uniform in-plane loading of a freestanding membrane of 2D materials inside a scanning electron microscope. The in situ tensile testing reveals the brittle fracture of large-area MoSe 2 crystals and measures their fracture strength for the first time., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Structural defects in monolayer molybdenum disulfide (MoS2) have significant influence on the electric, optical, thermal, chemical, and mechanical properties of the material. Among all the types of structural defects of the chemical vapor phase-grown monolayer MoS2, the VMoS3 point defect (a vacancy complex of Mo and three nearby S atoms) is another type of defect preferentially generated by the extended electron irradiation. Here, using the classical molecular dynamics simulation with reactive empirical bond-order (REBO) potential, we first investigate the effect of VMoS3 point defects on the elastic properties of monolayer MoS2 sheets. Under the constrained uniaxial tensile test, the elastic properties of monolayer MoS2 sheets containing VMoS3 vacancies with defect fraction varying from 0.01 to 0.1 are obtained based on the plane anisotropic constitutive relations of the material. It is found that the increase of VMoS3 vacancy concentration leads to the noticeable decrease in the elastic modulus but has a slight effect on Poisson's ratio. The maximum decrease of the elastic modulus is up to 25 %. Increasing the ambient temperature from 10 K to 500 K has trivial influences on the elastic modulus and Poisson's ratio for the monolayer MoS2 without defect and with 5 % VMoS3 vacancies. However, an anomalous parabolic relationship between the elastic modulus and the temperature is found in the monolayer MoS2 containing 0.1 % VMoS3 vacancy, bringing a crucial and fundamental issue to the application of monolayer MoS2 with defects.

Hexagonal boron nitride (h-BN) atomic layers were utilized as a passivation coating in this study. A large-area continuous h-BN thin film was grown on nickel foil using a chemical vapor deposition method and then transferred onto sputtered copper as a corrosion passivation coating. The corrosion passivation performance in a Na2SO4 solution of bare and coated copper was investigated by electrochemical methods including cyclic voltammetry (CV), Tafel polarization and electrochemical impedance spectroscopy (EIS). CV and Tafel analysis indicate that the h-BN coating could effectively suppress the anodic dissolution of copper. The EIS fitting result suggests that defects are the dominant leakage source on h-BN films, and improved anti-corrosion performances could be achieved by further passivating these defects.

In situ quantitative tensile tests of individual carbon nanotube (CNT)/SiC core-shell nanofibers are carried out in both a scanning electron microscope (SEM) and a transmission electron microscope (TEM). The incorporation of CNTs into a SiC matrix led to improved elastic modulus and fracture strength of the CNT/SiC nanofibers as compared to SiC alone., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Two-dimensional (2D) layered semiconducting transition-metal dichalcogenides (TMDCs) are promising candidates for next-generation ultrathin, flexible, and transparent electronics. Chemical vapor deposition (CVD) is a promising method for their controllable, scalable synthesis but the growth mechanism is poorly understood. Herein, we present systematic studies to understand the CVD growth mechanism of monolayer MoSe2 , showing reaction pathways for growth from solid and vapor precursors. Examination of metastable nanoparticles deposited on the substrate during growth shows intermediate growth stages and conversion of non-stoichiometric nanoparticles into stoichiometric 2D MoSe2 monolayers. The growth steps involve the evaporation and reduction of MoO3 solid precursors to sub-oxides and stepwise reactions with Se vapor to finally form MoSe2 . The experimental results and proposed model were corroborated by ab initio Car-Parrinello molecular dynamics studies., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A new concept for junction fabrication by connecting multiple regions with varying layer thicknesses, based on the thickness dependence, is demonstrated. This type of junction is only possible in super-thin-layered 2D materials, and exhibits similar characteristics as p-n junctions. Rectification and photovoltaic effects are observed in chemically homogeneous MoSe2 junctions between domains of different thicknesses., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Vertically stacked van der Waals heterostructures composed of compositionally different two-dimensional atomic layers give rise to interesting properties due to substantial interactions between the layers. However, these interactions can be easily obscured by the twisting of atomic layers or cross-contamination introduced by transfer processes, rendering their experimental demonstration challenging. Here, we explore the electronic structure and its strain dependence of stacked MoSe2/WSe2 heterostructures directly synthesized by chemical vapor deposition, which unambiguously reveal strong electronic coupling between the atomic layers. The direct and indirect band gaps (1.48 and 1.28 eV) of the heterostructures are measured to be lower than the band gaps of individual MoSe2 (1.50 eV) and WSe2 (1.60 eV) layers. Photoluminescence measurements further show that both the direct and indirect band gaps undergo redshifts with applied tensile strain to the heterostructures, with the change of the indirect gap being particularly more sensitive to strain. This demonstration of strain engineering in van der Waals heterostructures opens a new route toward fabricating flexible electronics.

A solid-liquid self-adaptive composite (SAC) is synthesized using a simple mixing-evaporation protocol, with poly(dimethylsiloxane) (PDMS) and poly(vinylidene fluoride) (PVDF) as active constituents. SAC exists as a porous solid containing a near equivalent distribution of the solid (PVDF)-liquid (PDMS) phases, with the liquid encapsulated and stabilized within a continuous solid network percolating throughout the structure. The pores, liquid, and solid phases form a complex hierarchical structure, which offers both mechanical robustness and a significant structural adaptability under external forces. SAC exhibits attractive self-healing properties during tension, and demonstrates reversible self-stiffening properties under compression with a maximum of 7-fold increase seen in the storage modulus. In a comparison to existing self-healing and self-stiffening materials, SAC offers distinct advantages in the ease of fabrication, high achievable storage modulus, and reversibility. Such materials could provide a new class of adaptive materials system with multifunctionality, tunability, and scale-up potentials.

The practical recycling of carbon dioxide (CO2) by the electrochemical reduction route requires an active, stable, and affordable catalyst system. Although noble metals such as gold and silver have been demonstrated to reduce CO2 into carbon monoxide (CO) efficiently, they suffer from poor durability and scarcity. Here we report three-dimensional (3D) graphene foam incorporated with nitrogen defects as a metal-free catalyst for CO2 reduction. The nitrogen-doped 3D graphene foam requires negligible onset overpotential (-0.19 V) for CO formation, and it exhibits superior activity over Au and Ag, achieving similar maximum Faradaic efficiency for CO production (∼85%) at a lower overpotential (-0.47 V) and better stability for at least 5 h. The dependence of catalytic activity on N-defect structures is unraveled by systematic experimental investigations. Indeed, the density functional theory calculations confirm pyridinic N as the most active site for CO2 reduction, consistent with experimental results.

A facile chemical vapor deposition method to prepare single-crystalline VS2 nanosheets for the hydrogen evolution reaction is reported. The electrocatalytic hydrogen evolution reaction (HER) activities of VS2 show an extremely low overpotential of -68 mV at 10 mA cm(-2), small Tafel slopes of ≈34 mV decade(-1), as well as high stability, demonstrating its potential as a candidate non-noble-metal catalyst for the HER., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

In this communication, nickel diselenide (NiSe2) nanoparticles are synthesized by a facile and low-cost hydrothermal method. The synthesis method can be extended to other metal diselenides as well. The electrode made of NiSe2 exhibits superior electrocatalytic activity in the hydrogen evolution reaction (HER). A low Tafel slope of 31.1 mV per decade is achieved for NiSe2, which is comparable to that of platinum (∼30 mV per decade). Moreover, the catalytic activity of NiSe2 is very stable and no obvious degradation is found even after 1000 cyclic voltammetric sweeps.

Large-scale suspended architectures of various two-dimensional (2D) materials (MoS2, MoSe2, WS2, and graphene) are demonstrated on nanoscale patterned substrates with different physical and chemical surface properties, such as flexible polymer substrates (polydimethylsiloxane), rigid Si substrates, and rigid metal substrates (Au/Ag). This transfer method represents a generic, fast, clean, and scalable technique to suspend 2D atomic layers. The underlying principle behind this approach, which employs a capillary-force-free wet-contact printing method, was studied by characterizing the nanoscale solid-liquid-vapor interface of 2D layers with respect to different substrates. As a proof-of-concept, a photodetector of suspended MoS2 has been demonstrated with significantly improved photosensitivity. This strategy could be extended to several other 2D material systems and open the pathway toward better optoelectronic and nanoelectromechnical systems.

Exfoliation of two-dimensional (2D) materials into mono- or few layers is of significance for both fundamental studies and potential applications. In this report, for the first time surface tension components were directly probed and matched to predict solvents with effective liquid phase exfoliation (LPE) capability for 2D materials such as graphene, h-BN, WS2, MoS2, MoSe2, Bi2Se3, TaS2, and SnS2. Exfoliation efficiency is enhanced when the ratios of the surface tension components of the applied solvent is close to that of the 2D material in question. We enlarged the library of low-toxic and common solvents for LPE. Our study provides distinctive insight into LPE and has pioneered a rational strategy for LPE of 2D materials with high yield.

The nitrogen-doped graphene (NG) with dominance of the pyridinic-N configuration is synthesized via a straightforward process including chemical vapor deposition (CVD) growth of graphene and postdoping with a solid nitrogen precursor of graphitic C3N4 at elevated temperature. The NG fabricated from CVD-grown graphene contains a high N content up to 6.5 at. % when postdoped at 800 °C but maintains high crystalline quality of graphene. The obtained NG exhibits high activity, long-standing stability, and outstanding crossover resistance for electrocatalysis of oxygen reduction reaction (ORR) in alkaline medium. The NG treated at 800 °C shows the best ORR performance. Further study of the dependence of ORR activity on different N functional groups in these metal-free NG electrodes provides deeper insights into the origin of ORR activity. Our results reveal that the pyridinic-N tends to be the most active N functional group to facilitate ORR at low overpotential via a four-electron pathway.

Leptospirosis is a re-emerging tropical infectious disease caused by pathogenic Leptospira spp. The different host innate immune responses are partially related to the different severities of leptospirosis. In this study, we employed transcriptomics and cytokine arrays to comparatively calculate the responses of murine peritoneal macrophages (MPMs) and human peripheral blood monocytes (HBMs) to leptospiral infection. We uncovered a series of different expression profiles of these two immune cells. The percentages of regulated genes in several biological processes of MPMs, such as antigen processing and presentation, membrane potential regulation, and the innate immune response, etc., were much greater than those of HBMs (>2-fold). In MPMs and HBMs, the caspase-8 and Fas-associated protein with death domain (FADD)-like apoptosis regulator genes were significantly up-regulated, which supported previous results that the caspase-8 and caspase-3 pathways play an important role in macrophage apoptosis during leptospiral infection. In addition, the key component of the complement pathway, C3, was only up-regulated in MPMs. Furthermore, several cytokines, e.g. interleukin 10 (IL-10) and tumor necrosis factor alpha (TNF-alpha), were differentially expressed at both mRNA and protein levels in MPMs and HBMs. Some of the differential expressions were proved to be pathogenic Leptospira-specific regulations at mRNA level or protein level. Though it is still unclear why some animals are resistant and others are susceptible to leptospiral infection, this comparative study based on transcriptomics and cytokine arrays partially uncovered the differences of murine resistance and human susceptibility to leptospirosis. Taken together, these findings will facilitate further molecular studies on the innate immune response to leptospiral infection.

Shell@core-nanostructured TiO(2)@ZnO n-p-n heterojunction nanorods with diameter of 30 nm were successfully fabricated via a hydrothermal method. The photodegradation rate of the TiO(2)@ZnO n-p-n nanorods evaluated by photodegrading methyl orange has been demonstrated to increase three times compared to that of wurtzite hexagonal ZnO. Anatase TiO(2) and Ti(2)O(3) grow along ZnO crystal lattices, which forms p-type Zn(2+) doped Ti(2)O(3) in the interface of TiO(2)/ZnO and therefore numerous n-p-n heterojunctions owing to the substitution of Ti(3+) by Zn(2+). Under the drive of inner electric field, the photogenerated electrons are both injected to the conduction band of Zn(2+) doped Ti(2)O(3) from conduction bands of ZnO and TiO(2), which efficiently enhances the separation of photogenerated electron-hole pairs and accelerates the transport of charges. The results suggest that TiO(2)@ZnO n-p-n heterojunction nanorods are very promising for enhancing the photocatalytic activity of photocatalysts.

To take full advantages of the structural uniqueness and exceptional properties of graphene as reinforcement in composites, harvesting well-dispersed graphene is essential. On the other hand, it is challenging to achieve simultaneously high stiffness, strength and toughness in engineered materials because of the trade-off relations between these properties. Here we demonstrate that the graphene reinforcing potential can be significantly enhanced through the excellent dispersion of graphene sheets in the matrix material and the strong graphene-matrix bonding by the coupled hydrogen passivation and ultrasonication technique. The fabricated graphene/epoxy composites exhibit simultaneously remarkable increase in elastic modulus, fracture strength, and fracture energy. We found that the inlet hydrogen atoms in the hydrogen passivation serve as a source of the second atoms to terminate the C dangling bonds and form more stable C-H bonds, separating graphene flakes and promoting the binding with the matrix material.

Co-infection with hepatitis delta virus (HDV) and hepatitis B virus (HBV) has been shown to be associated with a more severe form of acute and chronic hepatitis. Cloning and expression of recombinant HDV antigen (rHDAg) in Escherichiacoli are described. Using purified rHDAg, a cost-effective indirect anti-HDV enzyme-linked immunosorbent assay (ELISA) kit was developed. Direct comparison of 15 known HDV-positive sera and 15 HDV-negative sera showed concordance agreement between the new assay kit and the Abbott Murex Anti-Delta (total) kit. In addition, 1,486 hepatitis B surface antigen (HBsAg) positive blood samples collected from various areas of China were tested using this indirect anti-HDV ELISA. It was found that 1.2% (95% CI: 0.7-1.9%) of the samples were anti-HDAg positive. It is suggested that the prevalence of HDV and HBV co-infection in China is relatively low., (Copyright © 2012 Wiley Periodicals, Inc.)

A method combining hydrogen passivation and ultrasonication was developed for the first time to disperse multi-walled carbon nanotubes (MWCNTs) in ethanol solution and epoxy resin. Excellent dispersion of MWCNTs was achieved in both media. Three-point bending tests of the MWCNT/epoxy nanocomposites revealed a remarkable increase in elastic modulus with increasing MWCNT content., (Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

We report the observation of remarkable water molecule-induced stiffening in ZnO nanobelts using atomic force microscopy three-point bending test. It was found that the elastic modulus of ZnO nanobelts could increase significantly from 40 GPa under ambient condition up to 88 GPa at the relative humidity level of 80%. The physical mechanism for this phenomenon was explained in terms of increasing surface stress induced by water molecule adsorption on ZnO nanobelt surface. Our first-principles density functional theory calculations revealed that the water molecules adsorbed on the ZnO surface would attract surface Zn atoms to move outward and hence increase the value of surface stress of ZnO surface.