Search

Background: Rotational atherectomy (RA) is traditionally administered for patients with heavily calcified lesions and is thereby characterized by a high risk of the performed intervention. However, the prevalence characteristics of cardiac arrest are poorly studied in this group of patients. We aimed to evaluate the frequency and risk factors of cardiac arrest during percutaneous coronary interventions (PCI) performed with RA and preceding coronary angiography (CA)., Methods: Based on the data collected in the Polish Registry of Invasive Cardiology Procedures (ORPKI) from 2014 to 2021, we included 6522 patients who were treated with RA-assisted PCI. We scrutinized patient and procedural characteristics, as well as periprocedural complications, subsequently comparing groups in terms of cardiac arrest incidence with the use of univariable and multivariable analyses., Results: Thirty-five (0.5%) patients suffered from cardiac arrest during RA-PCI or preceding CA. They were characterized by significantly higher rates of prior stroke, acute coronary syndromes (ACS) as indications and higher Killip class (P < 0.001) at the admission time. Among the confirmed independent predictors of in-procedure cardiac arrest, the following can be noted: factors related to patients' clinical characteristics (e.g., older age, female sex, and disease burden), periprocedural characteristics (e.g., PCI within left main coronary artery [LMCA]), and periprocedural complications (e.g., coronary artery perforation and no-reflow phenomenon)., Conclusions: Severe clinical condition at baseline, expressed by ACS presence and Killip class IV, as well as RA-PCI performed within LMCA and other periprocedural complications, were the strongest predictors of cardiac arrest during RA-assisted PCI and CA.

Background: Differences between men and women in prognosis after sudden pre-hospital out-of-hospital cardiac arrest (OHCA) have been described in many studies, but the interplay between gender and pollution have not been characterized in detail. We aimed at appraising the interplay between gender and pollution on the prognosis of OHCA., Methods: Details on patients with OHCA in whom return of spontaneous circulation was obtained and transferred to a large teaching hospital were obtained from the medical charts of the ambulance service and the Polish National Health Fund. Matching pollutant concentrations (PM 2.5, PM10, As, Ni, Cd, Pb) were obtained from the Polish National Environmental Protection Inspectorate., Results: Details on 948 resuscitated OHCA, 325 (34.3%) of them in women, and occurring between 2018 and 2021, were retrieved. Notably, OHCA in women was associated with significantly higher daily concentrations of PM10 (23.37 [17.09, 37.04] vs. 21.92 [16.32, 29.98] μg/m 3 , P=0.023) and PM2.5 (16.83 [11.87, 28.24] vs. 15.27 [11.64, 22.72] μg/m 3 , P=0.026), as well as heightened concentrations of Cd, daily (0.32 [0.19, 0.44] vs. 0.27 [0.17, 0.40] ng/m 3 , P=0.027) and over 30 days (0.34 [0.20, 0.44] vs. 0.29 [0.18, 0.43] ng/m 3 , P=0.027). Concurrently, OHCA in females was associated with lower daily temperatures on the day of the incident (8.40 [0.20, 15.40] vs. 9.90 [1.40, 15.90] °C, P=0.042). Despite these differences, survival at 30 days and 12 months was similar in women and men (both P>0.05)., Conclusions: OHCA events with successful resuscitation in women occurred in concomitance with higher daily contaminant levels, yet short-term and long-term prognosis was similar in men and women. The interplay between gender and air pollution on OHCA outcomes requires further population-based studies.

An effective synthesis of conductive polymer brushes, i.e., self-templating surface-initiated copolymerization (ST-SICP), is developed. It proceeds through copolymerization of pendant thiophene groups in the precursor multimonomer poly(3-methylthienyl methacrylate) (PMTM) brushes with free 3-methylthiophene (3MT) monomers leading to PMTM-co-P3MT brushes. This approach leads to improved conformational freedom of generated conjugated poly(thiophene)-based chains and their higher share in the brushes with respect to conjugation of pendant thiophene groups only. As a result, best performing conjugated PMTM-co-P3MT brushes demonstrate high ohmic conductivity in both out-of-plane and in-plane direction. Furthermore, thanks to the covalent anchoring as well as intra- and intermolecular connections, highly stable and mechanically robust nanocoatings are produced which can survive mechanical cleaning and long-term storage under ambient conditions. Grafting of ionic poly(sodium 4-styrenesulfonate) (PSSNa) in between PMTM-co-P3MT chains brings new properties to such binary mixed brushes that can operate as thin-film memristive coating with switchable conductance. It is worth mentioning that the crucial synthetic steps, i.e., grafting of precursor PMTM brushes by surface-initiated organocatalyzed atom transfer radical polymerization (SI-O-ATRP) and PSSNa chains by surface-initiated photoiniferter-mediated polymerization (SI-PIMP) are conducted under ambient conditions using only microliter volumes of reagents providing methodology that can be considered for use beyond the laboratory scale., (© 2024 Wiley‐VCH GmbH.)

Polylactic acid (PLA), a polymer derived from renewable resources, is gaining increasing attention in the development of biomedical devices due to its cost-effectiveness, low immunogenicity, and biodegradability. However, its inherent hydrophobicity remains a problem, leading to poor cell adhesion features. On this basis, the aim of this work was to develop a method for functionalizing the surface of PLA films with a biopolymer, chitosan (CH), which was proved to be a material with intrinsic cell adhesive properties, but whose mechanical properties are insufficient to be used alone. The combination of the two polymers, PLA as a bulk scaffold and CH as a coating, could be a promising combination to develop a scaffold for cell growth. The modification of PLA films involved several steps: aminolysis followed by bromination to graft amino and then bromide groups, poly(glycidyl methacrylate) (PGMA) grafting by surface-initiated supplemental activator and reducing agent atom transfer radical polymerization (SI-SARA ATRP) and finally the CH grafting. To prove the effective adhesive properties, conjugated and non-conjugated films were tested in vitro as substrates for neuronal cell growth using differentiated neurons from human induced pluripotent stem cells. The results demonstrated enhanced cell growth in the presence of CH., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Antiphospholipid syndrome (APS), also known as Hughes syndrome, is an acquired autoimmune and procoagulant condition that predisposes individuals to recurrent thrombotic events and obstetric complications. Central is the role of three types of antiphospholipid antibodies that target phospholipid-binding proteins: lupus anticoagulant (LAC), anti-β2-glycoprotein I (β2-GPI-Ab), and anti-cardiolipin (aCL). Together with clinical data, these antibodies are the diagnostic standard. However, the diagnosis of APS in older adults may be challenging and, in the diagnostic workup of thromboembolic complications, it is an underestimated etiology. The therapeutic management of APS requires distinguishing two groups with differential risks of thromboembolic complications. The standard therapy is based on low-dose aspirin in the low-risk group and vitamin K antagonists in the high-risk group. The value of direct oral anticoagulants is currently controversial. The potential role of monoclonal antibodies is investigated. For example, rituximab is currently recommended in catastrophic antiphospholipid antibody syndrome. Research is ongoing on other monoclonal antibodies, such as daratumumab and obinutuzumab. This narrative review illustrates the pathophysiological mechanisms of APS, with a particular emphasis on cardiovascular complications and their impact in older adults. This article also highlights advancements in the diagnosis, risk stratification, and management of APS.

Background: This study aims to investigate the effect of arsenic (As), cadmium (Cd), nickel (Ni) and lead (Pb) suspended on particulate matters (PM) 2.5 and PM 10 taking into account clinical factors on 30-day and one-year survival after out-of-hospital cardiac arrest (OHCA)., Methods: A retrospective 4-year study that involved patients hospitalized after OHCA. Patients' data were obtained from Emergency Medical Services dispatch cards and the National Health Fund. The concentration of air pollutants was measured by the Environmental Protection Inspectorate in Poland., Results: Among the 948 patients after OHCA, only 225 (23.7%) survived for 30 days, and 153 (16.1%) survived for 1 year. Survivors were more commonly affected by OHCA in urban areas (85 [55.6%] vs. 355 [44.7%]; P=0.013) and had slightly higher one-year mean concentration of As (0.78 vs. 0.77; P=0.01), Cd (0.34 vs. 0.34; P=0.012), and Pb (11.13 vs. 10.20; P=0.015) with no differences in daily mean concentration. Significant differences in mean concentrations of heavy metals and PM 2.5 and PM 10 were observed among different quarters. However, survival analysis revealed no differences in long-term survival between quarters. Heavy metals, PM 2.5, and PM 10 did not affect short-term and long-term survival in multivariable logistic regression., Conclusions: The group of survivors showed slightly higher mean one-year concentrations of As, Cd and Pb, but they also experienced a higher incidence of OHCA in urban areas. There were no differences in long-term survival between patients who suffer OHCA in different quarters. Heavy metals did not independently affect survival.

Views on the etiopathogenesis of atherosclerosis are subject to evolution. In addition to the classic well-known risk factors, new ones related to mental state, social life and environment are being discovered. Both acute and chronic stress stimulate inflammatory processes. Due to the change in lifestyle and eating habits, the accumulation of risk factors in childhood is an increasing problem. Knowledge of risk factors allows for effective primary prevention of cardiovascular diseases. The effectiveness of prevention increases when the activities cover the largest possible part of the society, and access to a doctor is easy. Therefore, government programs are being implemented offering patients easier access to diagnostics of cardiovascular diseases at the level of primary health care, which enables faster identification of people at the greatest cardiovascular risk. Easier access to primary care and a good doctor-patient relationship improve patient compliance. In this situation, the importance of the family doctor as a key link in the diagnosis, prevention and treatment of cardiovascular diseases is increasing.

This article aimed to evaluate the visual and functional characteristics of intensively used football turf over 10 years, depending on the different areas of the game. The research was conducted on the football turf of the AZS Environmental Club in Wrocław (N: 51° 7' 31'' E:17° 4' 14''). High variability of the evaluated parameters was observed regarding seasonality, year of observation, and the area of play. It has been shown that the goal area and penalty box areas have the lowest functional value, which are vital areas of the game from the point of view of gaining an advantage in the game. Also, these places are more susceptible to creating sites without plants (requiring additional overseeding) due to the potential of hollowing and goalkeeper interventions ending with the body landing on the ground. The middle area was characterized by the highest overall aspect, color, and turf density values. In the vast majority of cases, there was a downward trend in the turfs' functional value with the turf's age, which is an essential finding in the context of the use of intensively used, athletic natural grass surfaces., (© 2023. Springer Nature Limited.)

Introduction: Many factors related to the switch to summer/winter time interfere with biological rhythms., Objectives: This study aimed to analyze the impact of time change on clinical outcomes of patients with acute coronary syndromes (ACS) undergoing percutaneous coronary intervention (PCI)., Patients and Methods: Electronic data of 874,031 patients with ACS who underwent invasive procedures were collected from the Polish National Register of Interventional Cardiology Procedures (ORPKI) between 2014 and 2021. We determined the number of patients undergoing PCI and periprocedural mortality during the day of spring or autumn time change and within the first 3 and 7 days after the time change., Results: We demonstrated the impact of time changes on the periprocedural mortality of ACS patients within 1 day and the period of 3 and 7 days from the time change. We observed that the occurrence of all ACS and NSTEMI on the first day was lower for both time changes and higher in the case of UA and spring time change. The autumn time change significantly reduced the occurrence of all types of ACS. A significant decrease in the number of invasive procedures was found after autumn transition in the period from the first day to 7 days for ACS, NSTEMI, and UA., Conclusions: The occurrence of ACS and the number of invasive procedures were lower for both changes over time. Autumn time change is associated with increased periprocedural mortality in ACS and a less frequent occurrence of UA and NSTEMI within 7 days.

Controlling cellular adhesion is a critical step in the development of biomaterials, and in cell- based biosensing assays. Usually, the adhesivity of cells is tuned by an appropriate biocompatible layer. Here, synthetic poly(diallyldimethylammonium chloride) (PDADMAC), natural chitosan, and heparin (existing in an extracellular matrix) were selected to assembly PDADMAC/heparin and chitosan/heparin films. The physicochemical properties of macroion multilayers were determined by streaming potential measurements (SPM), quartz crystal microbalance (QCM-D), and optical waveguide lightmode spectroscopy (OWLS). The topography of the wet films was imaged using atomic force microscopy (AFM). The adhesion of preosteoblastic cell line MC3T3-E1 on those well-characterized polysaccharide-based multilayers was evaluated using a resonant waveguide grating (RWG) based optical biosensor and digital holographic microscopy. The latter method was engaged to investigate long-term cellular behavior on the fabricated multilayers. (PDADMAC/heparin) films were proved to be the most effective in inducing cellular adhesion. The cell attachment to chitosan/heparin-based multilayers was negligible. It was found that efficient adhesion of the cells occurs onto homogeneous and rigid multilayers (PDADMAC/heparin), whereas the macroion films forming "sponge-like" structures (chitosan/heparin) are less effective, and could be employed when reduced adhesion is needed. Polysaccharide-based multilayers can be considered versatile systems for medical applications. One can postulate that the presented results are relevant not only for modeling studies but also for applied research., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Aneta Michna reports financial support was provided by National Science Centre Poland., (Copyright © 2023. Published by Elsevier B.V.)

Introduction: Coronavirus disease 2019 (COVID-19) exacerbates intravascular thrombosis that occurs in the coronary artery in ST-elevation myocardial infarction (STEMI)., Aim: To analyze the impact of COVID-19 on the application and effect of thrombectomy in STEMI patients., Material and Methods: 29915 STEMI patients were analyzed, of whom 3139 (10.5%) underwent thrombectomy. COVID-19 (+) was reported in 311 (10.8%). The clinical characteristics and management of STEMI in COVID-19 (+) and COVID-19 (-) patients were compared. A multivariable logistic regression analysis was performed in search of factors influencing thrombectomy., Results: COVID-19 (+) patients had higher Killip class (IV class; n = 33 (12.31%) vs. n = 138 (5.84%); p < 0.0001) and cardiac arrest at baseline was more frequent in this group ( n = 25 (8.04%) vs. n = 137 (4.84%); p = 0.016). Thrombolysis in myocardial infarction (TIMI) 3 after percutaneous coronary intervention was less frequent ( n = 248 (80.52%) vs. n = 2388 (87.19%); p = 0.001) in the COVID-19 (-) group. Periprocedural mortality was similar in both groups ( n = 28 (0.99%) vs. n = 4 (1.29%); p = 0.622). In multivariable regression analysis COVID-19 increased the risk of thrombectomy (OR = 1.23; 97.5% CI: 1.05-1.43; p = 0.001)., Conclusions: STEMI patients undergoing aspiration thrombectomy who were COVID-19 (+) were more likely to be in a severe clinical condition (higher Killip class, more frequent cardiac arrest before the procedure) than COVID-19 (-) patients. Despite more intensive antiplatelet and anticoagulant treatment, PCI procedures were less likely to result in an optimal TIMI 3 effect. COVID-19 is an independent strong predictor of patient qualification for aspiration thrombectomy in STEMI., Competing Interests: The authors declare no conflict of interest., (Copyright: © 2023 Termedia Sp. z o. o.)

Hypothesis: Mixed polymer brushes (MPBs) could be synthesized by surface dilution of homopolymer brushes and subsequent grafting of other type of chains in the formed voids. Nanophase separation and dynamics of surface-grafted chains could be tailored by modification of their molecular architecture. Mixed polyelectrolyte and conjugated chains contribute synergistically to tailor properties of the coating., Experiments: A new synthetic strategy that allowed spatially controlled grafting of poly(sodium 4-styrenesulfonate) chains (PSSNa) in close neighborhood of poly(3-methylthienyl methacrylate) (PMTM) brushes (precursors of the conjugated chains) using surface-initiated polymerizations was developed. The final mixed conjugated/polyelectrolyte brushes were prepared by template polymerization of pendant thiophene groups in PMTM chains. Surface dynamics and nanophase separation of MPBs were studied by nanoscale resolution IR imaging, SIMS profiling and AFM mapping in selective solvents., Findings: Unconjugated MPBs were shown to undergo vertical, and horizontal nanophase separation, while the size and shape of the nanodomains were dependent on molar ratio of the mixed chains and their relative lengths. Generation of the conjugated chains led to diminishing of nanophase separation thanks to stronger mutual interactions of conjugated PMTM and PSSNa (macromolecular mixing). The obtained systems demonstrated tunable interfacial structure and resistance switching phenomenon desired in construction of smart surfaces or memristive devices., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Inc. All rights reserved.)

Background: Intravascular ultrasound (IVUS) and fractional flow reserve (FFR) are invasive procedures increasingly used in treating acute coronary syndrome (ACS)., Aims: This study aimed to evaluate the frequency of IVUS and FFR use in patients with ACS in Poland and to assess the safety of these procedures as well as their impact on short- and long-term survival., Methods and Results: This retrospective study included 103849 patients enrolled in the Polish Registry of Acute Coronary Syndromes in 2017-2020. IVUS was performed in 1727 patients, FFR in 1537 patients, and both procedures in 37 patients. The frequency of performing FFR in ACS patients increased over the years from 1.3% to 1.8% (P <0.0001) and IVUS from 1.7% to 2.3% (P <0.0001). In the FFR and/or IVUS group, a similar incidence of stroke, reinfarction, target vessel revascularization, and major bleeding was observed while in-hospital mortality was lower (0% for IVUS + FFR vs. 0.9% for FFR vs. 2.3% for IVUS vs. 3.7 for no procedure; P <0.0001). FFR and IVUS did not affect the 30-day and one-year prognosis., Conclusion: In recent years, the number of FFR and IVUS procedures performed in patients with ACS in Poland has increased. There was lower in-hospital mortality in the FFR and/or IVUS group in ACS patients, and no differences in the incidence of stroke, reinfarction, target vessel revascularization, and major bleeding were observed. Performing FFR and IVUS in ACS patients does not significantly affect 30-day or one-year mortality.

Air pollution and COVID-19 infection affect the pathogenesis of cardiovascular disease. The impact of these factors on the course of ACS treatment is not well defined. The purpose of this study was to evaluate the effects of air pollution, COVID-19 infection, and selected clinical factors on the occurrence of perioperative death in patients with acute coronary syndrome (ACS) by developing a neural network model. This retrospective study included 53,076 patients with ACS from the ORPKI registry (National Registry of Invasive Cardiology Procedures) including 2395 COVID-19 (+) patients and 34,547 COVID-19 (-) patients. The neural network model developed included 57 variables, had high performance in predicting perioperative patient death, and had an error risk of 0.03%. Based on the analysis of the effect of permutation on the variable, the variables with the greatest impact on the prediction of perioperative death were identified to be vascular access, critical stenosis of the left main coronary artery (LMCA) or left anterior descending coronary artery (LAD). Air pollutants and COVID-19 had weaker effects on end-point prediction. The neural network model developed has high performance in predicting the occurrence of perioperative death. Although COVID-19 and air pollutants affect the prediction of perioperative death, the key predictors remain vascular access and critical LMCA or LAD stenosis.

An impaired fibrinolytic process has been demonstrated in patients infected with SARS-CoV-2, including those in severe or critical condition. Disruption of fibrinolysis leads to fibrin deposition, which exacerbates inflammation and fibrosis and damages the pulmonary surfactant. Numerous authors point out the different course of coagulopathy in patients with COVID-19. It is reported that they may have a state of secondary hyperfibrinolysis, which may explain, at least in part, the increased incidence of venous thromboembolism, even among those patients already receiving appropriate anticoagulant treatment. This raises the question of whether current guidelines for the prevention and treatment of embolic-thrombotic complications, among patients with severe COVID-19, are sufficient. Some studies show evidence of clinical improvement in patients who have received fibrinolytic therapy, beyond the current indications for its implementation. However, when considering the inclusion of systemic fibrinolytic therapy, the benefits of such treatment should always be weighed over the risk of adverse effects. Thromboelastography and rotational thromboelastometry can be helpful in making such decisions. The purpose of this study was to review the current knowledge regarding fibrinolysis and its role in the treatment of patients with severe COVID-19, including those with thromboembolic complications.

The preparation of composite materials is a promising methodology for concurrent optimization of electrical and thermal transport properties for improved thermoelectric (TE) performance. This study demonstrates how the acoustic impedance mismatch (AIM) and the work function of components decouple the TE parameters to achieve enhanced TE performance of the (1- z )Ge 0.87 Mn 0.05 Sb 0.08 Te-( z )WC composite. The simultaneous increase in the electrical conductivity (σ) and Seebeck coefficient (α) with WC (tungsten carbide) volume fraction ( z ) results in an enhanced power factor (α 2 σ) in the composite. The rise in σ is attributed to the creation of favorable current paths through the WC phase located between grains of Ge 0.87 Mn 0.05 Sb 0.08 Te, which leads to increased carrier mobility in the composite. Detailed analysis of the obtained electrical properties was performed via Kelvin probe force microscopy (work function measurement) and atomic force microscopy techniques (spatial current distribution map and current-voltage ( I-V ) characteristics), which are further supported by density functional theory (DFT) calculations. Furthermore, the difference in elastic properties (i.e., sound velocity) between Ge 0.87 Mn 0.05 Sb 0.08 Te and WC results in a high AIM, and hence, a large interface thermal resistance ( R int ) between the phases is achieved. The correlation between R int and the Kapitza radius depicts a reduced phonon thermal conductivity (κ ph ) of the composite, which is explained using the Bruggeman asymmetrical model. Moreover, the decrease in κ ph is further validated by phonon dispersion calculations that indicate the decrease in phonon group velocity in the composite. The simultaneous effect of enhanced α 2 σ and reduced κ ph results in a maximum figure of merit ( zT ) of 1.93 at 773 K for (1- z )Ge 0.87 Mn 0.05 Sb 0.08 Te-( z )WC composite for z = 0.010. It results in an average thermoelectric figure of merit ( zT av ) of 1.02 for a temperature difference (Δ T ) of 473 K. This study shows promise to achieve higher zT av across a wide range of composite materials.

COVID-19 causes thromboembolic complications that affect the patient’s prognosis. COVID-19 vaccines significantly improve the prognosis for the course of the infection. The aim of this study was to evaluate the impacts of patient characteristics, including COVID-19 vaccinations, on perioperative mortality in acute coronary syndrome in Poland during the pandemic. We analyzed the data of 243,515 patients from the National Registry of Invasive Cardiology Procedures (Ogólnopolski Rejestr Procedur Kardiologii Inwazyjnej [ORPKI]). In this group, 7407 patients (21.74%) had COVID-19. The statistical analysis was based on a neural network that was verified by the random forest method. In 2020, the most significant impact on prognosis came from a diagnosis of unstable angina, a short period (<2 h) from pain occurrence to first medical contact, and a history of stroke. In 2021, the most significant factors were pre-hospital cardiac arrest, female sex, and a short period (<2 h) from first medical contact to coronary angiography. After adjusting for a six-week lag, a diagnosis of unstable angina and psoriasis were found to be relevant in the data from 2020, while in 2021, it was the time from the pain occurrence to the first medical contact (2−12 h) in non-ST segment elevation myocardial infarction and the time from first contact to balloon inflation (2−12 h) in ST-segment elevation myocardial infarction. The number of vaccinations was one of the least significant factors. COVID-19 vaccination does not directly affect perioperative prognosis in patients with acute coronary syndrome.

The high stability and conductivity of 3,4-disubstituted polythiophenes such as poly(3,4-ethylenedioxythiophene) (PEDOT) make them attractive candidates for commercial applications. However, next-generation nanoelectronic devices require novel macromolecular strategies for the precise synthesis of advanced polymer structures as well as their arrangement. In this report, we present a synthetic route to make ladder-like polymer brushes with poly(3,4-propylenedioxythiophene) (PProDOT)-conjugated chains. The brushes were prepared via a self-templating surface-initiated technique (ST-SIP) that combines the surface-initiated atom transfer radical polymerization (SI-ATRP) of bifunctional ProDOT-based monomers and subsequent oxidative polymerization of the pendant ProDOT groups in the parent brushes. The brushes prepared in this way were characterized by grazing-angle FTIR, XPS spectroscopy, and AFM. Steady-state and time-resolved photoluminescence measurements were used to extract the information about the structure and effective conjugation length of PProDOT-based chains. Stability tests performed in ambient conditions and under exposure to standardized solar light revealed the remarkable stability of the obtained materials.

DNA origami is a widely used DNA nanotechnology that allows construction of two-dimensional and three-dimensional nanometric shapes. The designability and rigidity of DNA origami make it an ideal material for construction of topologically linked molecules such as catenanes, which are attractive for their potential as motors and molecular machines. However, a general method for production of topologically linked DNA origami has been lacking. Here, we show that catenated single-stranded DNA circles can be produced and used as a universal scaffold for the production of topologically linked (catenated) DNA origami structures where the individual linked structures can be of any arbitrary design. Assembly of these topologically linked DNA origami structures is achieved via a simple one-pot annealing protocol., Competing Interests: The authors declare the following competing financial interest(s): J.G.H., Y.S., and G.D.W. are named as inventors on a patent application describing DNA topogami. The authors declare no other competing financial interest., (© 2021 The Authors. Published by American Chemical Society.)

The article presents the modification of ash wood via surface initiated activators regenerated by electron transfer atom transfer radical polymerization mediated by elemental silver (Ag 0 SI-ARGET ATRP) at a diminished catalyst concentration. Ash wood is functionalized with poly(methyl methacrylate) (PMMA) and poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) to yield wood grafted with PMMA- b -PDMAEMA-Br copolymers with hydrophobic and antibacterial properties. Fourier transform infrared (FT-IR) spectroscopy confirmed the covalent incorporation of functional ATRP initiation sites and polymer chains into the wood structure. The polymerization kinetics was followed by the analysis of the polymer grown in solution from the sacrificial initiator by proton nuclear magnetic resonance ( 1 H NMR) and gel permeation chromatography (GPC). The polymer layer covalently attached to the wood surface was observed by scanning electron microscopy (SEM). The hydrophobic properties of hybrid materials were confirmed by water contact angle measurements. Water and sodium chloride salt aqueous solution uptake tests confirmed a significant improvement in resistance to the absorption of wood samples after modification with polymers. Antibacterial tests revealed that wood-QPDMAEMA-Br, as well as wood-PMMA- b -QPDMAEMA-Br, exhibited higher antibacterial activity against Gram-positive bacteria ( Staphylococcus aureus ) in comparison with Gram-negative bacteria ( Escherichia coli ). The paper presents an economic concept with ecological aspects of improving wood properties, which gives great opportunities to use the proposed approach in the production of functional hybrid materials for industry and high quality sports equipment, and in furniture production.

The synthesis of surface-grafted polymers with variable functionality requires the careful selection of polymerization methods that also enable spatially controlled grafting, which is crucial for the fabrication of, e.g., nano (micro) sensor or nanoelectronic devices. The development of versatile, simple, economical, and eco-friendly synthetic strategies is important for scaling up the production of such polymer brushes. We have recently shown that poly (3-methylthienyl methacrylate) (PMTM) and poly (3-trimethylsilyl-2-propynyl methacrylate) (PTPM) brushes with pendant thiophene and acetylene groups, respectively, could be used for the production of ladder-like conjugated brushes that are potentially useful in the mentioned applications. However, the previously developed syntheses of such brushes required the use of high volumes of reagents, elevated temperature, or high energy UV-B light. Therefore, we present here visible light-promoted metal-free surface-initiated ATRP (metal-free SI-ATRP) that allows the economical synthesis of PMTM and PTPM brushes utilizing only microliter volumes of reaction mixtures. The versatility of this approach was shown by the formation of homopolymers but also the block copolymer conjugated brushes (PMTM and PTPM blocks in both sequences) and patterned films using TEM grids serving as photomasks. A simple reaction setup with only a monomer, solvent, commercially available organic photocatalyst, and initiator decorated substrate makes the synthesis of these complex polymer structures achievable for non-experts and ready for scaling up.

Background: There are several sex-related differences in the course, management, and outcomes of ST-elevation myocardial infarction (STEMI). This study aimed to identify the risk factors that may affect the odds of procedure-related death in patients with STEMI., Methods: The observational cohort study group consisted of 118,601 participants recruited from the National Registry of Invasive Cardiology Procedures (ORPKI)., Results: Procedure-related death occurred in 802 (1.0%) men and in 663 (1.7%) women. The odds of procedure-related death among women were significantly higher than among men (OR, 1.76; 95% CI, 1.59-1.95; p < 0.001). The probability of procedure-related mortality was highest in both men and women with cardiac arrest in the cath lab, critical stenosis of the left main coronary artery, and direct transfer to the cath lab. The factors that reduced the probability of procedure-related mortality in both men and women were thrombolysis in myocardial infarction (TIMI) flow grade and the use of P2Y12 inhibitors in the peri-infarct period. Psoriasis was associated with increased odds of procedure-related death among men, whereas cigarette smoking reduced the odds among women., Conclusions: Procedure-related deaths occurred more frequently in women than men with STEMI. Additional scrutiny needs to be undertaken to identify factors influencing survival regarding gender differences.

Background: The COVID-19 pandemic is significantly affecting the functioning of the entire healthcare system. The disease itself may be associated with thromboembolic complications. The purpose of this study is to compare patients with acute coronary syndrome (ACS) and patients with ACS who were diagnosed with COVID-19 in terms of their clinical profile, management, treatment complications, and prognosis., Methods: We analyzed 47,940 cases of patients treated for ACS in 2020, including 44,952 patients (93.8%) who were not diagnosed with COVID-19 and 2988 patients (6.2%) who tested positive for COVID-19., Results: Patients with COVID-19 were significantly more likely to experience out-of-hospital sudden cardiac arrest (7.9 vs. 1.1%; p < 0.0001) and be transported directly to a catheterization laboratory (21.3% vs. 8.1%; p < 0.0001). Mortality was significantly higher in this group (0.9% vs. 0.4%; p < 0.0001). The risk of perioperative death was increased by age over 65 years, use of glycoprotein IIb/IIIa inhibitors (GPI IIb/IIIa), femoral access, critical left main stem coronary artery (LMCA) vascular lesions, ST elevation myocardial infarction (STEMI), and no-reflow phenomenon., Conclusions: Despite the pandemic, patients with COVID-19 were treated equally to healthy patients. Efficient organization of the healthcare system allowed the prompt transportation of patients to catheterization laboratories. The study group was characterized by a worse prognosis that was affected by multiple factors.

Aim of the study : To assess the occurrence of cardiac arrhythmias caused by high doses of levothyroxine in patients with thyroid cancer with subclinical hyperthyroidism. Materials and Methods : This prospective study included 98 women divided into three groups according to plasma thyroid stimulating hormone (TSH) concentration: <0.1 µU/mL, 0.1-0.39 µU/mL, or 0.4-4.0 µU/mL (control group). All participants underwent laboratory tests and an electrocardiography (ECG) Holter test to assess their heart rate and the occurrence of arrhythmias. Statistical analysis assessed differences between groups in all clinical parameters and factors influencing the occurrence of arrhythmias. Results : There were no differences between groups in the maximum, average, or minimum heart rate or in the incidence of the studied cardiac arrhythmias. Heart rate in women with a TSH concentration of <0.1 µU/mL depended on age and the presence of arterial hypertension, and heart rate in women with a TSH concentration of 0.4-4.0 µU/mL depended on free triiodothyronine concentration and the presence of arterial hypertension; no relationship was identified for women with a TSH concentration of 0.1-0.39 µU/mL. One-way logistic regression analysis did not identify any factors influencing the occurrence of arrhythmias. Conclusions : While maintaining normal free triiodothyronine levels, the use of suppressive doses of levothyroxine after thyroidectomy for differentiated thyroid cancer does not induce clinically significant arrhythmias or affect average heart rate. None of the studied clinical parameters influenced the risk of arrhythmia.

The selection of grass mixtures with appropriate visual and functional parameters for sowing football fields is a key element in shaping the sports infrastructure, ensuring the spectacularity of a match and comfort for players. The aim of the research was to investigate the properties of lawn grass mixtures and their suitability for football pitches. The experiment was conducted at the Toya Golf & Country Club (51° 20' E, 17° 07' N), Wrocław, Poland, between 2007 and 2009. 12 grass mixtures were selected, mainly based on red fescue, Kentucky bluegrass, and perennial ryegrass. The assessment was carried out using a nine-point scale, according to the Plant Variety Office methodology for crops and turf grass. Six features of sports turf were studied: appearance, density, colour, leaf fineness, overwintering, and susceptibility to disease and they significantly varied, depending on the grass mixture and the year of research. Our study showed that mixtures based on the dominance of meadow grass were characterized by higher values of the general visual aspect, colour and slenderness of the leaf blade and these based on the dominance of perennial ryegrass and co-dominance of perennial ryegrass and meadow grass were the most useful in terms of wintering, resistance to diseases and sodding., (© 2021. The Author(s).)

Out-of-hospital cardiac arrest (OHCA), defined as abrupt cessation of mechanical activity of the heart, is one of the most common causes of death in high-income countries. Cardiac arrest is most often a result of severe cardiovascular disease. New evidence shows that air pollutants such as heavy metals and atmospheric particulate matter have an impact on the pathophysiology of many cardiovascular diseases as well on incidences of OHCA. This retrospective analysis includes all OHCA cases that occurred in central Poland covering the area of 11.711 km 2 with the population density of 108 people per square kilometer. Among 2878 EMS-treated OHCA cases between 2013 and 2016, cardiopulmonary resuscitation (CPR) was attempted in 2076 (72%) patients. Concentrations of air pollutants were compared with temperature, humidity and clinical factors affecting the CPR. The study shows seasonal variation of PM 2.5 (p < 0.001), PM 10 (p < 0.001), As (p < 0.001) and Cd (p < 0.001) over the years. Air pollution has a significant effect on the parameters of pre-hospital evaluation in OHCA patients, especially with respect to the content of PM2.5/PM10 and heavy metals. Nickel exposure affects the incidence of initial shockable rhythm (IRR 0.92; p = 0.01) and effectiveness of CPR (IRR 0.94; p = 0.003). Arsenic has an impact on overall mortality (IRR 1.07; p = 0.01) and death upon the arrival of EMS team (IRR 1.15; p < 0.001). Overall mortality was also related to ambient levels of PM10 (IRR 1.004; p < 0.047)., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021. Published by Elsevier B.V.)

Direct exfoliation of layered zeolites into solutions of monolayers has remained unresolved since the 1990s. Recently, zeolite MCM-56 with the MWW topology (layers denoted mww) has been exfoliated directly in high yield by soft-chemical treatment with tetrabutylammonium hydroxide (TBAOH). This has enabled preparation of zeolite-based hierarchical materials and intimate composites with other active species that are unimaginable via the conventional solid-state routes. The extension to other frameworks, which provides broader benefits, diversified activity, and functionality, is not routine and requires finding suitable synthesis formulations, viz. compositions and conditions, of the layered zeolites themselves. This article reports exfoliation and characterization of layers with ferrierite-related structure, denoted bifer, having rectangular lattice constants like those of the FER and CDO zeolites, and thickness of approximately 2 nm, which is twice that of the so-called fer layer. Several techniques were combined to prove the exfoliation, supported by simulations: AFM; in-plane, in situ, and powder X-ray diffraction; TEM; and SAED. The results confirmed (i) the structure and crystallinity of the layers without unequivocal differentiation between the FER and CDO topologies and (ii) uniform thickness in solution (monodispersity), ruling out significant multilayered particles and other impurities. The bifer layers are zeolitic with Brønsted acid sites, demonstrated catalytic activity in the alkylation of mesitylene with benzyl alcohol, and intralayer pores visible in TEM. The practical benefits are demonstrated by the preparation of unprecedented intimately mixed zeolite composites with the mww, with activity greater than the sum of the components despite high content of inert silica as pillars.

The DNA origami technique allows the facile design and production of three-dimensional shapes from single template strands of DNA. These can act as functional devices with multiple potential applications but are constrained by practical limitations on size. Multi-functionality could be achieved by connecting together distinct DNA origami modules in an ordered manner. Arraying of non-identical, three-dimensional DNA origamis in an ordered manner is challenging due for example, to a lack of compatible rotational symmetries. Here we show that we can design and build ordered DNA structures using non-identical 3D building blocks by using DNA origami snub-cubes in left-handed and right-handed forms. These can be modified such that one form only binds to the opposite-handed form allowing regular arrays wherein building blocks demonstrate alternating chirality., Competing Interests: There are no conflicts of interest., (This journal is © The Royal Society of Chemistry.)

The work presents a detailed study on the diamond-like structures doped with Si atoms and biopolymers-based coatings (chitosan, alginate) enriched with Ag nanoparticles (Ag NPs) deposited on the Ti-6Al-7Nb substrate. Multilayers were obtained by Plasma Enhanced Radio Frequency Chemical Vapour Deposition (PE RF CVD) technique and subsequent deposition of biopolymers by immersion method. The impact of Si atoms and Ag NPs on chemical structure, microstructure, topography, cytotoxicity as well as the hardness and Young modulus of the resulting layers was precisely investigated. The most advantageous conditions of plasma functionalization in RF reactor were the mixture of O 2 -Ar-NH 3 in volume ratio of 10/1/9 in the first stage of functionalization (pre-activation). In the case of Si-DLC coatings (up to ca. 19 at.%) the lower silane flow (4 cm 3 /min) resulted in significant decrease of surface roughness (up to ca. R a  = 0.71 nm) of modified surfaces and increase of hardness reaching ca. 900 nm depth into surface (up to ca. 16 GPa). The most attractive among biopolymer-based coating on Ti-6Al-7Nb in terms of biological activity was chitosan with Ag NPs (diameter of ca. 25 nm) with additional alginate layer. AFM analysis revealed a uniform distribution of Ag NPs in the chitosan matrix. This contributed to advantageous physicochemical and biological properties assuring proper cell adhesion and proliferation. Noteworthy, the resulting surface functionalization of Ti-6Al-7Nb alloy did not cause significant cytotoxicity in vitro, giving a strong hope for perspective applications in implantology., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Microcapsules formed using a "layer-by-layer" alternating deposition of oppositely charged polyelectrolytes on sacrificial templates have reached high interest because of their facile fabrication procedure using a broad range of materials and tailored properties. However, their practical applications as microcarriers are limited as the capsules commonly suffer from low mechanical stability that can be enhanced by chemical or physical crosslinking but at the expense of decreasing permeability of the capsules' walls. It is demonstrated here that the incorporation of multiwalled carbon nanotubes in a relatively small amount (3.5%) arranged in the direction perpendicular to the capsules' walls led to an almost 20-fold increase of the apparent elastic modulus of the microcapsules as shown using the osmotic pressure method. Importantly, the introduced carbon nanotubes due to their absorption in the near-infrared region and specific arrangement enabled also a light-triggered increase of permeability of the capsules in a reversible, nondestructive manner as shown using fluorescently labeled dextrans of various molar masses. Such results imply durability and facile loading/unloading of the microcapsules that are both crucial for their practical applications as microcontainers and microreactors.

Background: Despite optimizing treatment of ST-segment elevation myocardial infarction (STEMI), a number of patients die during the invasive procedure or experience sudden cardiac arrest (SCA) that complicates further hospitalization., Aims: This study aimed to identify the most important risk factors leading to SCA and death in the cath lab among STEMI patients., Methods: We used data from the National Registry of Invasive Cardiology Procedures (ORPKI) collected between 2014 and 2019. The study population consisted of 113 465 patients. Descriptive statistics, univariate and multiple logistic regression analysis of factors affecting perioperative mortality (PM) and SCA in the cath lab were performed., Results: Death and SCA occurred in 1549 (1.4%) and 945 (0.8%) patients, respectively. Diabetes (odds ratio [OR], 1.76; P <0.0001), previous brain stroke (OR, 2.26; P <0.0001), prior myocardial infarction (OR, 1.81; P <0.0001), psoriasis (OR, 1.79; P = 0.04), and chronic renal failure (OR, 2.79; P <0.0001) were the strongest predictors of PM. The occurrence of SCA was dependent mainly on diabetes (OR, 1.37; P = 0.0001), previous brain stroke (OR, 2.23; P <0.0001), prior myocardial infarction (OR, 1.73; P <0.0001), psoriasis (OR, 2.03; P = 0.04), and chronic renal failure (OR, 2.79; P <0.0001). Of the pre-hospital factors, the Killip-Kimball class showed the strongest relationship with the two endpoints (OR 3.53; P <0.0001 and OR 2.65; P <0.0001, respectively)., Conclusions: Diabetes, previous brain stroke, myocardial infarction, psoriasis, chronic renal failure, and the Killip-Kimball class were the strongest predictors of PM and SCA in the cath lab among STEMI patients.

The main focus of this work was to establish a correlation between surface topography and chemistry and surface colonization by lactic acid bacteria. For this reason, we chose gold substrates with different surface architectures (i.e., smooth and nanorough) that were characterized by atomic force microscopy (AFM), electron scanning microscopy (SEM), and X-ray diffractometry (XRD). Moreover, to enhance biocompatibility, we modified gold substrates with polymeric monolayers, namely cationic dextran derivatives with different molar masses. The presence of those layers was confirmed by AFM, infrared spectroscopy (IR), and X-ray photoelectron spectroscopy (XPS). In order to determine the adhesion abilities of non-modified and modified gold surfaces, we tested three lactic acid bacteria (LAB) strains (i.e., Lactobacillus rhamnosus GG, Lactobacillus acidophilus, and Lactobacillus plantarum 299v). We have shown that surface roughness influences the surface colonization of bacteria, and the most significant impact on the growth was observed for the Lactobacillus rhamnosus GG strain. What is more, covering the gold surface with a molecular polymeric film by using the layer-by-layer (LbL) method allows additional changes in the bacterial growth, independently on the used strain. The well-being of the bacteria cells on tested surfaces was confirmed by using selective staining and fluorescence microscopy. Finally, we have determined the bacterial metabolic activity by measuring the amount of produced lactic acid regarding the growth conditions. The obtained results proved that the adhesion of bacteria to the metallic surface depends on the chemistry and topography of the surface, as well as the specific bacteria strain.

Reversible deactivation radical polymerizations with reduced amount of organometallic catalyst are currently a field of interest of many applications. One of the very promising techniques is photoinduced atom transfer radical polymerization (photo-ATRP) that is mainly studied for copper catalysts in the solution. Recently, advantageous iron-catalyzed photo-ATRP (photo-Fe-ATRP) compatible with high demanding biological applications was presented. In response to that, we developed surface-initiated photo-Fe-ATRP (SI-photo-Fe-ATRP) that was used for facile synthesis of poly(methyl methacrylate) brushes with the presence of only 200 ppm of FeBr 3 /tetrabutylammonium bromide catalyst (FeBr 3 /TBABr) under visible light irradiation (wavelength: 450 nm). The kinetics of both SI-photo-Fe-ATRP and photo-Fe-ATRP in solution were compared and followed by 1 H NMR, atomic force microscopy (AFM) and gel permeation chromatography (GPC). Brush grafting densities were determined using two methodologies. The influence of the sacrificial initiator on the kinetics of brush growth was studied. It was found that SI-photo-Fe-ATRP could be effectively controlled even without any sacrificial initiators thanks to in situ production of ATRP initiator in solution as a result of reaction between the monomer and Br radicals generated in photoreduction of FeBr 3 /TBABr. The optimized and simplified reaction setup allowed synthesis of very thick (up to 110 nm) PMMA brushes at room temperature, under visible light with only 200 ppm of iron-based catalyst. The same reaction conditions, but with the presence of sacrificial initiator, enabled formation of much thinner layers (18 nm).

Silicon wafers as semiconductors are essential components of integrated circuits in electronic devices. For this reason, modification of the silicon surface is an important factor in the manufacturing of new hybrid materials applied in micro- and nanoelectronics. Herein, copolymer brushes of hydrophilic poly(2-hydroxyethyl acrylate) (PHEA) and hydrophobic poly( tert -butyl acrylate) (P t BA) were grafted from silicon wafers via simplified electrochemically mediated atom transfer radical polymerization ( se ATRP) according to a surface-initiated approach. The syntheses of PHEA- b -P t BA copolymers were carried out with diminished catalytic complex concentration (successively 25 and 6 ppm of Cu). In order to optimize the reaction condition, the effect of the addition of a supporting electrolyte was investigated. A controlled increase in PHEA brush thickness was confirmed by atomic force microscopy (AFM). Various other parameters including contact angles and free surface energy (FSE) for the modified silicon wafer were presented. Furthermore, the effect of the presence of a sacrificial initiator in solution on the thickness of the grafted brushes was reported. Successfully fabricated inorganic-organic hybrid nanomaterials show potential application in biomedicine and microelectronics devices, e.g., biosensors.

Background: Out‑of‑hospital cardiac arrest (OHCA) is one of the leading causes of death in high‑income countries., Aims: This study aimed to analyze long ‑term survival in patients with OHCA in the ŚwiętokrzyskieProvince, who were included in the National Registry of Invasive Cardiology Procedures (ORPKI), estimate survival probability, and evaluate associated risk factors., Methods: Based on the ORPKI registry, we identified subjects with OHCA prior to hospitalization. Data were collected from January 1, 2014 to December 31, 2016., Results: Out‑of ‑hospital cardiac arrest occurred in 90 of 9855 patients diagnosed with myocardial infarction. We identified 2 significant risk factors: renal failure (HR, 6.53; 95% CI, 1.17-36.40; P = 0.03) and time (hours) from symptom onset to first medical contact (HR, 1.04; 95% CI, 1.01-1.08; P = 0.02). The probability of survival in patients below 66 years of age was almost 2‑fold higher (HR, 1.99; 95% CI, 1.1-3.59; P = 0.02) than in those over the age of 66 years. In those without diabetes mellitus, it was more than 2‑fold higher (HR, 2.36; 95% CI, 1.12-4.98; P = 0.03) than in diabetic patients, and in individuals with single‑vessel coronary artery disease, it was almost 3‑fold higher (HR, 2.76; 95% CI, 1.51-5.06; P = 0.001) than in those with multivessel coronary artery disease., Conclusions: Well‑documented predictors of all ‑cause mortality include: age, history of diabetesmellitus and renal failure, multivessel coronary artery disease on angiography, and time from pain onset to first medical contact. The total amount of contrast agent administered during invasive procedures and patient radiation exposure during procedures are less commonly reported risk factors for unfavorable outcomes.

Pioglitazone, a popular antidiabetic drug, which was recently shown to be effective in the treatment of skin ulcers, was successfully encapsulated in polysaccharide nanoparticles and used as a bioactive component of the wound-dressing material based on modified bacterial nanocellulose. Alginate and hydroxypropyl cellulose were used as a matrix for the nanoparticulate drug-delivery system. The matrix composition and particles' size, as well as drug encapsulation efficiency and loading, were optimized. Pioglitazone hydrochloride (PIO) loaded particles were coated with chitosan introduced into the crosslinking medium, and covalently attached to the surface of bacterial nanocellulose functionalized with carboxyl groups. PIO was released from the surface of the hybrid material in a controlled manner for 5 days. Preliminary cytotoxicity studies confirmed safety of the system at PIO concentrations as high as 20 mg/mL. The obtained hybrid system may have potential application in the treatment of skin ulcers e.g., in diabetic foot.

Spherical silica nanoparticles with solid cores and mesoporous shells (SCMS) were decorated with thermoresponsive polymer brushes that were shown to serve as macromolecular valves to control loading and unloading of a model dye within the mesopores. Thermoresponsive poly(N-isopropylacrylamide) (PNIPAM) brushes were grafted from the surfaces of both solid core (SC) and SCMS particles of similar size using surface-initiated atom transfer radical polymerization. Both systems based on porous (SCMS-PNIPAM) and nonporous (SC-PNIPAM) particles were characterized using cryo-TEM, thermogravimetry and elemental analysis to determine the structure and composition of the decorated nanoparticles. The grafted PNIPAM brushes were found to be responsive to temperature changes enabling temperature-controlled gating of the pores. The processes of loading and unloading in the obtained systems were examined using a model fluorescent dye-rhodamine 6G. Polymer brushes in SCMS-PNIPAM systems were shown to serve as molecular valves enabling significant adsorption (loading) of the dye inside the pores with respect to the SC-PNIPAM (no pores) and SCMS (no valves) systems. The effective unloading of the fluorescent cargo molecules from the decorated nanoparticles was achieved in a water/methanol solution. The obtained SCMS-PNIPAM particles may be used as smart nanocontainers or nanoreactors offering also facile isolation from the suspension due to the presence of dense cores.

The most effective approach to practical exploitation of the layered solids that often have unique valuable properties-such as graphene, clays, and other compounds-is by dispersion into colloidal suspensions of monolayers, called liquid exfoliation. This fundamentally expected behavior can be used to deposit monolayers on supports or to reassemble into hierarchical materials to produce, by design, catalysts, nanodevices, films, drug delivery systems, and other products. Zeolites have been known as extraordinary catalysts and sorbents with three-dimensional structures but emerged as an unexpected new class of layered solids contributing previously unknown valuable features: catalytically active layers with pores inside or across. The self-evident question of layered zeolite exfoliation has remained unresolved for three decades. Here, we report the first direct exfoliation of zeolites into suspension of monolayers as proof of the concept, which enables diverse applications including membranes and hierarchical catalysts with improved access., (Copyright © 2020 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works. Distributed under a Creative Commons Attribution NonCommercial License 4.0 (CC BY-NC).)

The utilization of used crosslinked functional polymers (CFP) applied as sorbents or ion-exchangers is a great challenge arising from the need to protect the environment. In this paper we report a very promising way of obtaining carbon/magnetic composites based on metal (Co 2+ ; Ni 2+ ; Fe 3+ ) derivatives of butadiene rubber-based phosphorus-containing polymer, which were treated as the model used CFP. We proposed a facile one-step thermal degradation approach to transform used CFP into carbon/magnetic composites (CMC). The obtained CMCs contained a mixture of metal phosphates and metal phosphides that exhibited strong magnetic properties due to the presence of nanosized metal derivatives with diameters of 100⁻140 nm. Structural and morphological changes of CFP and CMC after thermal degradation were investigated by the FTIR technique, X-ray Diffraction analysis, Scanning Electron Microscope, and Atomic Force Microscope⁻Magnetic Force Microscope. Moreover, thermal degradation kinetics parameters were determined to optimize the efficiency of the process.

This article describes the synthesis of anionic polymer brushes and their mineralization with calcium phosphate. The brushes are based on poly(3-sulfopropyl methacrylate potassium salt) providing a highly charged polymer brush surface. Homogeneous brushes with reproducible thicknesses are obtained via surface-initiated atom transfer radical polymerization. Mineralization with doubly concentrated simulated body fluid yields polymer/inorganic hybrid films containing AB-Type carbonated hydroxyapatite (CHAP), a material resembling the inorganic component of bone. Moreover, growth experiments using Dictyostelium discoideum amoebae demonstrate that the mineral-free and the mineral-containing polymer brushes have a good biocompatibility suggesting their use as biocompatible surfaces in implantology or related fields.

Surface-grafted polymer brushes of novel ladder-like architecture were proposed for inducing ordering of chromophores embedded therein. The brushes with acetylene side groups were obtained by surface-initiated photoiniferter-mediated polymerization. The acetylene moieties reacted then through a "click" process with an axially azide-bifunctionalized silicon phthalocyanine bridging the neighboring chains that inherently adopt extended conformations in dense brushes. FTIR, quartz crystal microbalance, and atomic force microscopy were used to study formation and structure of the photoactive brushes varying in grafting densities. Importantly, photophysical properties of the chromophores were virtually unaffected upon embedding them into the brushes, as evidenced by UV/Vis absorption and emission spectroscopy. Owing to the unique ordering of the chromophores, the proposed method may open new opportunities for the fabrication of light-harvesting systems suitable for photovoltaic or sensing applications., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A novel biopolymeric material in the form of nano/microspheres was developed which was capable of adsorbing coronaviruses. The biopolymer was obtained by crosslinking of chitosan (CHIT) with genipin, a nontoxic compound of plant origin, in inverted emulsion and reacting the chitosan nano/microspheres obtained (CHIT-NS/MS) with glycidyltrimethyl-ammonium chloride (GTMAC). As a result the nano/microspheres of N-(2-hydroxypropyl)-3-trimethyl chitosan (HTCC-NS/MS) were obtained. HTCC-NS/MS were studied as the adsorbents of human coronavirus NL63 (HCoV-NL63), mouse hepatitis virus (MHV), and human coronavirus HCoV-OC43 particles in aqueous virus suspensions. By studying cytopathic effect (CPE) caused by these viruses and performing PCR analyses it was found HTCC-NS/MS strongly adsorb the particles of HCoV-NL63 virus, moderately adsorb mouse hepatitis virus (MHV) particles, but do not adsorb HCoV-OC43 coronavirus. The adsorption capacity of HTCC-NS/MS well correlated with the antiviral activity of soluble HTCC against a given virus. Importantly, it was shown that HCoV-NL63 particles could be desorbed from the HTCC-NS/MS surface with a salt solution of high ionic strength with retention of virus virulence. The obtained material may be applied for the removal of coronaviruses, purification and concentration of virus samples obtained from biological matrices and for purification of water from pathogenic coronaviruses., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Diagnosis and treatment of infective endocarditis (IE) is still a challenge for physicians. Group of patients with the worst prognosis is treated in Intensive Cardiac Care Unit (ICCU). Etiologic agent can not be identified in a substantial number of patients., Aim: The aim of study is to find differences between patients with blood culture negative infective endocarditis (BCNIE) and blood culture positive infective endocarditis (BCPIE) treated in ICCU by comparing their clinical course and laboratory parameters., Materials and Methods: Retrospective analysis of 30 patients with IE hospitalized in ICCU Swietokrzyskie Cardiac Centre between 2010 and 2016. This group consist of 26 men (86,67%) and 4 women (13,3%). Mean age was 58 years ±13. Most of the cases were new disease, recurrence of the disease was observed in 2 cases (6,7%). 8 patients (26,7%) required artificial ventilation, 11 (36,7%) received inotropes and 6 (20%) vasopresors. In 14 (46,7%) cases blood cultures was negative (BCNIE), the rest of patients (16, 53,3%) was blood cultures - positive infective endocarditis (BCIE)., Results: Both of the groups were clinically similar. There were no statistically significant differences in incidence of cardiac implants, localization of bacterial vegetations, administered catecholamines, antibiotic therapy, artificial ventilation, surgical treatment, complication and in-hospital mortality. Incidence of cardiac complications in all of BCNIE cases and in 81,3% cases of BCPIE draws attention, but it is not statistically significant difference (p=0,08). There was statistically significant difference in mean BNP blood concentration (3005,17 ng/ml ±2045,2 vs 1013,42 ng/ml ±1087,6; p=0,01), but there were no statistically significant differences in rest of laboratory parameters., Conclusions: BCNIE group has got higher mean BNP blood concentration than BCPIE group. There were no statistically significant differences between these groups in others laboratory parameters, clinical course and administered antibiotic therapy. In our endemic region major cause of BCNIE seems to be early antibiotic therapy prior to collection of blood samples, but further studies are necessary.

A facile strategy for the synthesis of conjugated polyelectrolyte brushes grafted from a conductive surface is presented. Such brushes form a platform of molecular wires oriented perpendicularly to the surface, enabling efficient directional transport of charge carriers. As the synthesis of conjugated polymer brushes using chain-growth polymerization via a direct "grafting from" approach is very challenging, we developed a self-templating surface-initiated method. It is based on the formation of multimonomer template chains in the first surface-initiated polymerization step, followed by the second polymerization leading to conjugated chains in an overall ladder-like architecture. This strategy exploits the extended conformation of the surface-grafted brushes, thereby enabling alignment of the pendant polymerizable groups along the template chains. We synthesized a new bifunctional monomer and used the developed approach to obtain quaternized poly(ethynylpyridine) chains on a conductive indium tin oxide surface. A catalyst-free quaternization polymerization was for the first time used here for surface grafting. The presence of charged groups makes the obtained brushes both ionically and electronically conductive. After doping with iodine, the brushes exhibited electronic conductivity, in the direction perpendicular to the surface, as high as 10 -1 -10 0 S m -1 . Tunneling AFM was used for mapping the surface conductivity and measuring the conductivity in the spectroscopic mode. The proposed synthetic strategy is very versatile as a variety of monomers with pendant polymerizable groups and various polymerization techniques may be applied, leading to platforms of molecular wires with the desired characteristics.

The paper presents a method for precise estimation of evapotranspiration of selected turfgrass species. The evapotranspiration functions, whose domains are only two relatively easy to measure parameters, were developed separately for each of the grass species. Those parameters are the temperature and the volumetric moisture of soil at the depth of 2.5 cm. Evapotranspiration has the character of a modified logistic function with empirical parameters. It assumes the form ETR(θ (2.5 cm), T (2.5 cm)) = A/(1 + B · e (-C · (θ (2.5 cm) · T (2.5 cm)), where: ETR(θ (2.5 cm), T (2.5 cm)) is evapotranspiration [mm · h(-1)], θ (2.5 cm) is volumetric moisture of soil at the depth of 2.5 cm [m(3) · m(-3)], T (2.5 cm) is soil temperature at the depth of 2.5 cm [°C], and A, B, and C are empirical coefficients calculated individually for each of the grass species [mm · h(1)], and [-], [(m(3) · m(-3) · °C)(-1)]. The values of evapotranspiration calculated on the basis of the presented function can be used as input data for the design of systems for the automatic control of irrigation systems ensuring optimum moisture conditions in the active layer of lawn swards.

Infection with influenza type A virus may cause serious cardiovascular complications, such as myocarditis, heart failure, acute myocardial infarction. Also infection with influenza type AH1N1 may contribute to aggravation of cardiac disorders, i.e. acute coronary syndrome, heart failure, cardiogenic shock, severe ventricular arrythmias. One of the most fatal complication of influenza is pneumonia leading to acute respiratory insufficiency requiring artifitial ventilation. Symptoms of respiratory tract infections durnig influenza epidemy should always be treated with a high index of suspicion. Early diagnosis and adequate antiviral treatment may prevent those complications. A series of four cases of patients hospitalised in intensive cardiac care unit due to suspected cardiac dyspnea and finally diagnosed as a cardiac disease complicated by influenza pneumonia is presented.

The radial increment and crown status of mature Scots pine trees growing in polluted and unpolluted sites were compared. In 1996, as a result of some malfunction, unleaded petrol penetrated into the soil next to a plantation. Detailed geological and hydrological studies revealed the route of the spread of contamination and extent of the pollution. The trees growing in polluted sites revealed strong depletion of radial growth starting immediately after pollution. Such depletion lasted 2-3 years before the ring widths stabilised at a low level. After a few years the radial increment increased, and now do not differ from the increment of trees in the unpolluted sites.