Search

About 200 million tons of coal fly ash (CFA) is not effectively used in China every year. To enhance the utilization of biomass waste quinoa husk (QH) and solid waste CFA and reduce the preparation cost of superabsorbent resin (SAR), a low-cost, biodegradable modified quinoa husk-g-poly (acrylic acid)/coal fly ash superabsorbent resin (MQH-g-PAA/CFA SAR) was synthesized using modified quinoa husk (MQH), acrylic acid and CFA and used to improve the drought resistance and fertilizer conservation ability of soil. The surface morphology and performance of SAR were characterized by Fourier transform infrared (FTIR) spectrometry, scanning electron microscopy (SEM), and thermogravimetric analysis (TGA), which provided evidence for improving the properties of SAR by grafting MQH and adding CFA. In addition, the synthesis conditions were studied and optimized, together with the contents of initiator, crosslinker, MQH, and CFA to acrylic acid as well as the neutralization degree of acrylic acid. After optimization, the optimum water absorbency of SAR in deionized water, tap water, and physiological saline was 1302, 356, and 91 g/g respectively. The swelling and water-retention mechanisms of SARs were analyzed by a dynamic model and the results were in good agreement with the experimental data. In the soil experiment, the addition of SAR improved the drought resistance ability of soil, and reduced the leaching loss of fertilizer in the soil (from 49.5 % to 36.7 %). Therefore, this material exhibits significant potential in the field of agriculture and offers a novel approach with economic benefit for the utilization of MQH and CFA., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

In this study, we explored the potential of a newly prepared nano-zero valent zinc (nZVZn), biochar (BC)/nZVZn and BC/hydroxyapatite-alginate (BC/HA-alginate) composites for the removal of inorganic As species from water. Relatively, higher percentage removal of As(III) and As(V) was obtained by nZVZn at pH 3.4 (96% and 94%, respectively) compared to BC/nZVZn (90% and 88%) and BC/HA-alginate (88% and 80%) at pH 7.2. Freundlich model provided the best fit ( R 2 = up to 0.98) for As(III) and As(V) sorption data of all the sorbents, notably for nZVZn. The pseudo-second order model well-described kinetics of As(III) and As(V) ( R 2 = 0.99) sorption on all the sorbents. The desorption experiments demonstrated that the As removal efficiency, up to the third sorption/desorption cycle, was in the order of nZVZn ∼ BC/HA-alginate (88%) > BC/nZVZn (84%). The Fourier transform infrared spectroscopy depicted that the -OH, -COOH, Zn-O and Zn-OH surface functional groups were responsible for the sorption of As(III) or As(V) on the sorbents investigated here. This study highlights that removal of As species from water by BC/nZVZn composite can be compared with nZVZn, suggesting that integrating BC with nZVZn could efficiently remove As from As-contaminated drinking water.

Phosphorus (P) has been identified as a major cause of eutrophication. One feasible way to deal with P-containing wastewater is to employ advanced adsorbents with high P affinity. Towards this end, the loading of these sorbents onto a conductive scaffold would facilitate the introduction of an electric field into the reaction system thereby permitting a continuous-flow operation and improved P sorption kinetics. Here, the preparation and evaluation of an electroactive carbon nanotube (CNT) filter functionalized with cerium-based metal organic frameworks (Ce-MOF) is reported. Various advanced characterization techniques confirmed the successful fabrication of the Ce-MOF/CNT nanohybrid filter. The results suggested that the nanohybrid filter had a maximum P adsorption capacity of 22.41 mg g -1 , which compared favorably with other state-of-the-art P sorbents. Ce-MOF loading, applied voltage and flow rate each increased the rate constants for phosphate removal by factors of 1.6, 2.1 and 5.8 times relative to the absent states. The underlying P sorption mechanisms involved outer-sphere surface complexation (electrostatic attraction), inner-sphere surface complexation (Ce-O-P) and diffusion. The performance was tolerant of a wide operational pH range and different water matrices. The Ce-MOF/CNT electrochemical filter described in this study provides a viable strategy to address the challenging issues associated with aqueous P pollution., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

The effects of coagulant dosage, alkalinity, turbidity, ionic strength, and dissolved organic matter (DOM) on the removal of sulfadimethoxazole (SMZ) and oxytetracycline (OTC) by coagulation were studied and the reaction mechanisms of the coagulation process were revealed in this research. From our results, alkalinity, turbidity, ionic strength, and DOM had different effects on the removal of antibiotics. The SMZ and OTC removals were improved with increase in poly-aluminum chloride (PACl) dosage, whereas the turbidity had less influence on the removal of SMZ and OTC because the adsorption of SMZ and OTC to kaolin was low, confirmed by a control when no PACl added. The hydrolysate of PACl played a more important role than turbidity in SMZ and OTC removals. The SMZ and OTC removals were significantly increased with the increase in alkalinity, which provided a suitable condition in situ for coagulant to form more optimal species of hydrolysate. The ionic strength, which was adjusted by NaNO 3 , also had a positive effect on the removal of SMZ but no obvious effect on the OTC removal. Furthermore, DOM had a higher effect on the removal of SMZ than that of OTC. In another word, if a water plant wants to improve the removal of SMZ and OTC by coagulation unit, PACl hydrolysate, alkalinity, and DOM are the three key factors to be considered primarily. Moreover, an experiment for the recovery of antibiotics from the flocs was done and the results showed that OTC and SMZ were removed by different mechanisms. The OTC was removed via complexation formed through the reaction between OTC and coagulant while the SMZ was removed through the pathway of adsorption and inter-particle bridging to the surface of coagulant hydrolysate.

This study focused on evaluating the use of powdered activated carbon (PAC) adsorption for the treatability of various odor compounds with different structures. The adsorption performance of 14 odor compounds under various PAC dosages were fitted with two isotherm models (the Langmuir and Freundlich models) to evaluate the adsorption ability. The results indicated that the adsorption capacities estimated from isotherm model predictions were not suitable for the evaluation of treatability of the odor compound due to the neglection of odor threshold. A novel assessment method, through the comparison of the residual concentration at an inflection point (where the downward trend of the odor compound residual concentration and PAC dosage curve starts to flatten) and the corresponding threshold concentration, was employed. This assessment method considered the different thresholds of the various odor compounds and their absorbability by PAC as well as the cost. The results indicated that only the sulfur odor compounds, including dimethyl disulfide, diethyl disulfide and dimethyl trisulfide, were not suitable for PAC treatment. Other odor compounds could be treated by PAC with varying success. The correlations between the adsorption capacity and the treatability of various odor compounds and their properties, including the coefficient between octanol and water (LogK w ), solubility, molar refractivity (MR), dipole and volume, were also evaluated using the Pearson and Spearman correlation analysis. The results indicated that there were not significant correlations between the adsorption capacity and the properties of the odor compounds, while there were significant correlations between the treatability and LogK w , MR and volume. The odor causing compound with a larger LogK w , MR and volume was more suitable to be treated by PAC., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

A new, environmental friendly, polysilicate ferric manganese (PSFM) coagulant, composed of Fe, Mn and Si, was designed and developed. As part of the process, the PSFM flocs were then deposited onto an ultrafiltration (UF) membrane to increase the removal of active dyes and its antifouling properties in the presence of the active dye was tested. Influencing factors, such as dosage of coagulant and solution pH, were systematically investigated and included as the process optimization. The results show that PSFM flocs were well distributed on the membrane surface and a dense and homogeneous deposition layer was formed under optimal conditions. According to the characterization of PSFM floc by Fourier infrared (FTIR) and X-ray photoelectron spectroscopy (XPS), the major phase of PSFM floc is determined to be Mn x Fe y Si z O w (OH) i and the functional groups of this component contribute positively to the coagulation performance. The removal rate of the active yellow dye reached 86% at pH 5.0 with small and regular floc formed in the dense deposition layers. At pH 11.0 loose deposition layers were formed by large flocs and the removal of the active yellow dye reduce to 11%. Therefore, PSFM has a commendable potential to be used for producing a kind of deposited UF membrane with an excellent performance by controlling the forms of flocs and the deposition layers, which is the key mechanism to achieve a high efficiency for removal of active yellow dye., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Due to the extensive existence of tetracyclines (TCs), struvite (MgNH 4 PO 4 ·6H 2 O) recovery from swine wastewater will pose TCs-pharmacological threats to the agricultural planting and environment. This study investigated the influences of dissolved organic matters (DOM), as an important medium in the wastewater, on TCs transport during struvite recovery from swine wastewater. Compared to TCs concentrations of 1.49-2.16 μg/g in the solids obtained from synthetic wastewater, the existence of DOM significantly enhanced TCs contents in the products with the values of 360-742 μg/g. DOM was fractionated into four size fractions with different molecular weight cut-off, i.e. FDOM1 (30 kDa-0.45 μm), FDOM2 (5-30 kDa), FDOM3 (1-5 kDa) and FDOM4 (<1 kDa). Results revealed that the destabilization and aggregation of FDOM1 and FDOM2 contributed major roles to TCs transport from the aqueous phase to the solid products. Meanwhile, the hydrolysis of certain parts of FDOM1 and FDOM2 led to the aqueous TCs re-partition among various DOM constituents, which presented a false appearance that FDOM4 with smaller molecular weight posed significant influences on TCs transport. Increasing pH values from 8.5 to 10.5 resulted with a stepwise increase of precipitated DOM, thereby enhancing TCs concentrations from 94.5 to 292.4 μg/g to 627.2-825.0 μg/g in the recovered solids. The outcomes provide a better understanding on the capability of DOM on TCs transport and abatement in the phosphate recovery process., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Spatial and seasonal variations of arsenic species in Lake Taihu (including Zhushan Bay, Meiliang Bay, Gonghu Bay, and Southern Taihu) were investigated. Relatively high levels of total arsenic (TAs) and arsenate (As(V)) were observed in hyper-eutrophic regions during summer and autumn, which is attributed to exogenous contamination and seasonal endogenous release from sediments. The distributions of TAs and As(V) were significantly affected by total phosphorus, iron, manganese, and dissolved organic carbon. Arsenite (As(III)) and methylarsenicals (the sum of monomethylarsenic acid (MMA(V)) and dimethylarsenic acid (DMA(V))), mainly from biotransformation of As(V), were affected by temperature-controlled microalgae activities and local water quality parameters, exhibiting significantly higher concentrations and proportions in hyper-eutrophic and middle eutrophic regions during summer compared to mesotrophic region. The eutrophic environment, which induces changes in the main water quality parameters such as phosphorus, chlorophyll-a, iron, manganese, and dissolved organic carbon, can favor the biogeochemical cycling of arsenic in the aquatic systems., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Conventionally, resin fractionation (RF) method has been widely used to characterize dissolved organic matter (DOM) found in different source waters based on general and broad DOM fractions grouping. In this study, a new refined method using multistep, microvolume resin fractionation combined with excitation emission matrix fluorescence spectroscopy (MSM-RF-EEMS) was developed for further isolation and characterization of subfractions within the primary DOM fractions separated from using the conventional RF method. Subsequently, its feasibility in indicating the occurrence of urban pollution in source waters was also assessed. Results from using the new MSM-RF-EEMS method strongly illustrated that several organic subfractions still exist within the regarded primary pure hydrophobic acid (HoA) fraction including the humic- and fulvic-like organic matters, tryptophan- and tyrosine-like proteins. It was found that by using the MSM-RF-EEMS method, the organic subfractions present within the primary DOM fraction could be easily identified and characterized. Further validation on the HoA fraction using the MSM-RF-EEMS method revealed that the constant association of EEM peak T1 (tryptophan) fraction could specifically be used to indicate the occurrence of urban pollution in source water. The correlation analysis on the presence of EEM peak T2 (tyrosine) fraction could be used as a supplementary proof to further verify the presence of urban pollution in source waters. These findings on using the presence of EEM peaks T1 and T2 within the primary HoA fraction would be significant and useful for developing a sensory device for online water quality monitoring.

For pollution monitoring, we developed a new combined fractionation technique (CFT) to characterize dissolved organic matter (DOM) in natural water by combining resin adsorption (RA) and ultrafiltration (UF) with 3D-fluorescence measurement. We tested the new technique on 4 polluted and 4 unpolluted samples. The 3D-fluorescence characteristics of size sub-components in the hydrophobic acid (HPOA) fraction could distinguish unpolluted from polluted DOM. The unpolluted HPOA fraction was composed of a single dominant size component-peak A (fulvic-like, around Ex240/Em410 nm) material with relatively large molecular weight (MW) (>10 kDa). In comparison, the HPOA in polluted DOM contained another predominant size component with lower MW (<5 kDa)-peak T material (tryptophan-like protein, around Ex230/Em340 nm). The fluorescence of peak T material with lower MW (<5 kDa) in HPOA would be a good indicator of pollution or deterioration of source water quality. The application of this new CFT could yield more detailed and scientific information on the size and chemical character of the fluorophores in DOM sub-fractions., (Copyright © 2012 Elsevier B.V. All rights reserved.)

Understanding the environmental safety and human health implications of engineered nanoparticles (ENPs) is of worldwide importance. As an important ENPs, engineered nano-TiO(2) (Enano-TiO(2)) may have been substantially deposited in aquatic sediments because of its widely uses. Sediment pore surface properties would be thus significantly influenced due to the large surface area of Enano-TiO(2). In this study, Enano-TiO(2) was found to greatly impact on sediment pore surface properties. The attachment of Enano-TiO(2) particles to sediment surfaces enhanced markedly BET specific surface area and t-Plot external specific surface area, and thereby increased sediment phosphorus (P) adsorption maximum (S(max)). Contrarily, the fill of Enano-TiO(2) particles into the micropores of sediments could significantly reduce t-Plot micropore specific surface area, and cause slight decrease in sediment P binding energy (K). Clearly, P sorbed in sediment would be easily released because of the decreasing P binding energy of the sediment with elevated Enano-TiO(2). Enano-TiO(2) would thus cause aggravated endogenous pollution in water if such sediment was re-suspended on disturbance. The results obtained in this study contribute to our increasing knowledge of how to regulate physicochemical behavior of pollutants in sediments under the influences of Enano-TiO(2) and/or similar ENPs., (Copyright © 2011 Elsevier B.V. All rights reserved.)

The character of dissolved organic matter (DOM) in source waters from two countries (Australia and China) was investigated using an extended fractionation technique by combining resin adsorption, ultrafiltration and high performance size exclusion chromatography. There are distinctive chemical characteristics associated with DOM origins. Australian sourced DOM had higher hydrophobic acid (HoA) content and exhibited a more pronounced humic character, indicating a higher influence from allochthonous organics (decayed plant bodies from vegetated catchments). The higher content of hydrophobic base and neutral components found in Chinese DOM, may be attributed to the effects of increasing pollution caused by the rapid urbanization in China. The molecular weights (MWs) of aquatic HoA are predominantly in the moderate (e.g., 1-10 kDa) or small (e.g., < 1 kDa) ranges. This suggests that aquatic HOA should not be assumed as high MW organics without experimental validation. It is also found that some of the low MW compounds in our samples were hydrophobic, which could explain the observation of low MW organic compounds being able to be removed by conventional treatment processes.

Batch experiments were conducted to assess the effects of Cu(II) and Zn(II) on the biosorption of Pb(II) ions by fresh tissues of Myriophyllum spicatum. The biosorption of Pb(II) was examined for single, binary and ternary solutions at different initial concentrations and different pH values. The experimental results showed that the biosorption capacity increased with increasing pH from 2.0 to 6.0. Both Cu(II) and Zn(II) ions were found to have an adverse effect on the biosorption of Pb(II). The biosorption equilibrium data for single-metal solution were fitted to three isotherm models: Langmuir, Freundlich and Sips, and the Sips isotherm model gave the best fit for the experimental data. The maximum biosorption of Pb(II) in Pb-Cu binary system decreased with increasing concentration of copper ions, and the biosorption equilibrium data for the binary metal solution fitted the Langmuir competitive model well. Comparison between biosorption of Pb(II) and Cu(II) by M. spicatum in the binary solution could lead to the conclusion that the biosorbent (M. spicatum) has no preference of Pb(II) over Cu(II). Fourier transform infrared (FT-IR) spectroscopy was used to characterize the interaction between M. spicatum and Pb(II) ions. The results revealed that the carboxyl, hydroxyl and carbonyl groups are the main binding sites for Pb(II)., (2010 Elsevier B.V. All rights reserved.)

Iron oxides coated on Fe(0) core-shell nanospheres (nIOCI) were synthesized through the reduction of ferrous sulfate aqueous solution by sodium borohydride at ambient atmosphere. The catalyst was highly effective for the degradation of humic acid (HA) in the presence of H(2)O(2) and UVA at neutral pH. Under deoxygenated conditions in the dark, the generation of hydroxyl radicals in aqueous nIOCI dispersion verified its galvanic cell-like performance, which enhanced the interfacial electron transfer and led to its higher reactivity. By the total organic carbon, the absorbance of UV(254), FTIR, the molecular weight distribution and the chemical fractional character analysis, the degradation process of HA was shown to proceed by the disappearance of aromaticity, the increase of hydrophilic fraction and aromatic ring openings into CO(2) and small organic acid. The treated HA showed much lower reactivity toward chlorine and the disinfection byproduct (DBP) formation potential was also greatly reduced. Moreover, it was found that the DBP formation potential more depended on the structure of the intermediates of HA degradation than TOC removal.

The pollutants in urban storm runoff, which lead to an non-point source contamination of water environment around cities, are of great concerns. The distributions of typical contaminants and the variations of their species in short term storm runoff from different land surfaces in Xiamen City were investigated. The concentrations of various contaminants, including organic matter, nutrients (i.e., N and P) and heavy metals, were significantly higher in parking lot and road runoff than those in roof and lawn runoff. The early runoff samples from traffic road and parking lot contained much high total nitrogen (TN 6-19 mg/L) and total phosphorus (TP 1-3 mg/L). A large proportion (around 60%) of TN existed as total dissolved nitrogen (TDN) species in most runoff. The percentage of TDN and the percentage of total dissolved phosphorus remained relatively stable during the rain events and did not decrease as dramatically as TN and TP. In addition, only parking lot and road runoff were contaminated by heavy metals, and both Pb (25-120 microg/L) and Zn (0.1-1.2 mg/L) were major heavy metals contaminating both runoff. Soluble Pb and Zn were predominantly existed as labile complex species (50%-99%), which may be adsorbed onto the surfaces of suspended particles and could be easily released out when pH decreased. This would have the great impact to the environment.

Dissolved organic matter (DOM) and its potential to form disinfection by-products (DBPs) during drinking water treatment raise challenges to water quality control. Understanding both chemical and physical characteristics of DOM in source waters is key to better water treatment. In this study, the DOM from four typical source waters in China was fractionated by XAD resin adsorption (RA) and ultrafiltration (UF) techniques. The trihalomethane formation potential (THMFP) of all fractions in the DOM were investigated to reveal the major THM precursors. The fraction distributions of DOM could be related to their geographical origins in a certain extent. The dominant chemical fraction as THM precursors in the DOM from south waters (East-Lake reservoir in Shenzhen and Peal rivers in Guangzhou) was hydrophobic acid (HoA). The size fraction with molecular weight (MW) <1 kDa in both south waters had the highest THMFP. The results of cluster analysis showed that the parameters of fractions including DOC percentage (DOC%), UV254%, SUVA254 (specific UV254 absorbance) and THMFP were better for representing the differences of DOM from the studied waters than specific THMFP (STHMFP). The weak correlation between SUVA254 and STHMFP for either size or XAD fractions suggests that whether SUVA254 can be used as an indicator for the reactivity of THM formation is highly dependent on the nature of organic matter.