Search

Developmental abnormalities are more common in somatic cell nuclear transfer (SCNT) embryos due to epigenetic barriers that occur during the maternal-to-zygotic transition (MZT). N6-methyladenosine (m6A) is an RNA epigenetic modification that plays a significant role in numerous biological processes. However, the relationship between m6A and SCNT embryonic development is largely unexplored. In the present study, we found that the low expression of m6A methyltransferase-like 3 (METTL3) was associated with developmental arrest before zygotic genome activation (ZGA) in goat SCNT embryos and that karyokinesis defects were evident during their development. Notably, we demonstrated that METTL3 overexpression rescued the karyokinesis abnormalities, enhanced embryonic development and elevated the blastocyst formation rate. Further experiments revealed that METTL3 could mitigate the defects of maternal mRNA degradation, enhance the translation of Aurora kinase B (AURKB) and increase the phosphorylation of serine 10 on histone H3 (H3S10ph) to ensure the normal karyokinesis in SCNT embryos before ZGA in goats. Overall, our study highlights the essential role of METTL3 in enhancing the development of goat SCNT embryos. These findings indicate that METTL3 is critical for optimal SCNT efficiency and advance our understanding of m6A's role in embryonic development., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Background: This investigation assessed patient satisfaction with a temporal incision technique using a super-high superficial musculoaponeurotic system (SMAS) flap for midface lifting in a Chinese patient cohort., Methods: From July 2019 to July 2023, 95 patients underwent midface lifts via a temporal incision approach at our institution. The extent of SMAS flap dissection spanned 2 cm above the outer canthus, to the lower margin of the zygomatic arch inferiorly, and medially to the zygomaticus major muscle. The technique involved anchoring the elevated SMAS flap to the deep temporal fascia to elevate the malar fat pads, correct sagging tissues, and ameliorate the appearance of nasolabial folds., Results: Among the 95 patients, 61 completed a follow-up ranging from 6 months to 2 years postsurgery, with a majority reporting satisfaction with the aesthetic results of their midface lift. No significant complications, including permanent facial nerve injury, were reported., Conclusions: The temporal incision super-high SMAS face lift technique demonstrated high patient satisfaction and clinical effectiveness in improving the appearance of nasolabial fold and midface aesthetics. However, the success of this technique hinges on a comprehensive understanding of facial anatomy due to the confined operative field, highlighting its technical demands and the need for surgical expertise., Competing Interests: The authors have no financial interest to declare in relation to the content of this article. This study was approved by the Affiliated Friendship Plastic Surgery Hospital of Nanjing Medical University. Disclosure statements are at the end of this article, following the correspondence information., (Copyright © 2024 The Authors. Published by Wolters Kluwer Health, Inc. on behalf of The American Society of Plastic Surgeons.)

The absorption of microplastics and nanoplastics (M(N)Ps) by plants has been reported, but their uptake from natural soils that is similar to the agro-ecosystems remains unclear. Additionally, the influence of soil environment factors, such as soil moisture (SM) and soil texture (ST), on the absorption and migration of M(N)Ps from soil remains uncertain. We examined absorption of M(N)Ps of various sizes by lettuce (Lactuca sativa) in Mollisols with varying levels of SM (5, 10, 15 ml water per 2d) across different ST (23.67 % and 44.09 % sand) under controlled incubation conditions. Our results revealed high M(N)Ps absorption by lettuce from natural soil, with notable distribution, particularly in stem and even on leaf surfaces, suggesting to the potential migration path. M(N)Ps presence reduced lettuce growth across different SM and ST compared with the control group (without M(N)Ps), possibly due to the uptake of M(N)Ps. Higher SM promoted plant growth and transpiration, enhanced M(N)Ps absorption and migration, and resulted in higher concentration observed in the leaves. Moreover, an interaction between SM and ST was observed, affecting the distribution of M(N)Ps in lettuce organs. These findings underscore the significance of SM and ST as key factors affecting M(N)Ps absorption and distribution in plants., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Natural organisms and biological systems provide a rich source of inspiration for the development of bioinspired microrobots. These diminutive automatons, designed to emulate the intricate structures and functions of living entities, extend human capabilities across a spectrum of applications. This review endeavors to amalgamate and elucidate the underpinnings of such bioinspired microrobots design, traversing the interdisciplinary expanse of research. It delineates a spectrum of biomedical applications for bioinspired microrobots, encompassing targeted drug delivery, cellular manipulation, and minimally invasive surgical procedures, among others. Moreover, the current technical challenges and future directions of bioinspired microrobots in the biomedical field are discussed. The objective is to impart a holistic view to the readership, illuminating the significance of bioinspired microrobots in contemporary biomedicine and charting potential trajectories of innovation.

Dynamic structural colors can change in response to different environmental stimuli. This ability remains effective even when the size of the species responsible for the structural color is reduced to a few micrometers, providing a promising sensing mechanism for solving microenvironmental sensing problems in micro-robotics and microfluidics. However, the lack of dynamic structural colors that can encode rapidly, easily integrate, and accurately reflect changes in physical quantities hinders their use in microscale sensing applications. Herein, we present a 2.5-dimensional dynamic structural color based on nanogratings of heterogeneous materials, which were obtained by interweaving a pH-responsive hydrogel with an IP-L photoresist. Transverse gratings printed with pH-responsive hydrogels elongated the period of longitudinal grating in the swollen state, resulting in pH-tuned structural colors at a 45° incidence. Moreover, the patterned encoding and array printing of dynamic structural colors were achieved using grayscale stripe images to accurately encode the periods and heights of the nanogrid structures. Overall, dynamic structural color networks exhibit promising potential for applications in information encryption and in situ sensing for microfluidic chips., Competing Interests: Declarations Conflict of Interest The authors declare no confict of interest. They have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024. The Author(s).)

The pollution of soil with heavy metals (HMs) has become an environmental problem of global concern. Phytoremediation, whereby plants extract HMs from soil, can efficiently and substantially reduce HM pollution in soil in an environmentally friendly manner. Cadmium-induced protein AS8 (CIPAS8) is present in many plants and its expression is induced by HMs. In this study, PeCIPAS8 and SlCIPAS8 were transformed into 84K poplar to study their effects on tolerance to, and translocation of, cadmium (Cd) in woody plants. Localization analyses showed that two CIPAS8 proteins were localized at the plasma membrane when transiently expressed in tobacco leaf epidermal cells. Compared with wild-type 84K poplar seedlings, transgenic poplar lines overexpressing PeCIPAS8 or SlCIPAS8 showed increased Cd contents and decreased Cd tolerance. Transgenic poplar lines overexpressing PeCIPAS8 or SlCIPAS8 accumulated more Cd in the roots, stems, and leaves, but the plant height did not differ significantly, compared with wild-type 84K poplar under Cd stress during the vegetative stage. CIPAS8 increased the Cd influx rate of transgenic poplar roots compared with that of the wild type, and affected the transcription levels of other metal transporters. These findings show that CIPAS8 increases Cd flux into plant tissues and demonstrate moderate Cd sensitivity of the plant. Therefore, CIPAS8 is an influx transporter with the potential to increase the uptake of toxic HMs by woody plants growing in HM-contaminated soils., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Masson SAS. All rights reserved.)

Intermittent fasting (IF) plays a critical role in mitigating obesity, yet the precise biological mechanisms require further elucidation. Here Orosomucoid 2 (Orm2) is identified as an IF-induced hepatokine that stimulates adipose browning. IF induced Orm2 expression and secretion from the liver through peroxisome proliferator-activated receptor alpha (PPARα). In adipose tissue, Orm2 bound to glycoprotein 130/interleukin 23 receptor (GP130/IL23R) and promoted adipose browning through the activation of p38 mitogen-activated protein kinases (p38-MAPK). In obese mice, Orm2 led to a significant induction of adipose tissue browning and subsequent weight loss, an effect that is not replicated by a mutant variant of Orm2 deficient in GP130/IL23R binding capability. Crucially, genetic association studies in humans identified an obesity-associated Orm2 variant (D178E), which shows decreased GP130/IL23R binding and impaired browning capacity in mice. Overall, the research identifies Orm2 as a promising therapeutic target for obesity, mediating adipose browning through the GP130/IL23R-p38 signalling pathway., (© 2024 The Author(s). Advanced Science published by Wiley‐VCH GmbH.)

Successful bone regeneration requires close cooperation between bone marrow mesenchymal stem cells (BMSCs) and macrophages, but the low osteogenic differentiation efficiency of stem cells and the excessive inflammatory response of immune cells hinder the development of bone repair. It is necessary to develop a strategy that simultaneously regulates the osteogenic differentiation of BMSCs and the anti-inflammatory polarization of macrophages for accelerating the bone regeneration. Herein, calcium-chlorogenic acid nanoparticles (Ca-CGA NPs) are synthesized by combining the small molecules of chlorogenic acid (CGA) with Ca 2+ . Ca-CGA NPs internalized by cells can be dissolved to release free CGA and Ca 2+ under low pH conditions in lysosomes. In vitro results demonstrate that Ca-CGA NPs can not only enhance the osteogenic differentiation of BMSCs but also promote the phenotype transformation of macrophages from M1 to M2. Furthermore, in vivo experiments confirm that Ca-CGA NPs treatment facilitates the recovery of rat skull defect model through both osteoinduction and immunomodulation. This study develops a new Ca-CGA NPs-based strategy to induce the differentiation of BMSCs into osteoblasts and the polarization of macrophages into M2 phenotype, which is promising for accelerating bone repair., (© 2024 Wiley‐VCH GmbH.)

Soft actuators have assumed vital roles in a diverse number of research and application fields, driving innovation and transformative advancements. Using 3D molding of smart materials and combining these materials through structural design strategies, a single soft actuator can achieve multiple functions. However, it is still challenging to realize soft actuators that possess high environmental adaptability while capable of different tasks. Here, the response threshold of a soft actuator is modulated by precisely tuning the ratio of stimulus-responsive groups in hydrogels. By combining a heterogeneous bilayer membrane structure and in situ multimaterial printing, the obtained soft actuator deformed in response to changes in the surrounding medium. The response medium is suitable for both biotic and abiotic environments, and the response rate is fast. By changing the surrounding medium, the precise capture, manipulation, and release of micron-sized particles of different diameters in 3D are realized. In addition, static capture of a single red blood cell is realized using biologically responsive medium changes. Finally, the experimental results are well predicted using finite element analysis. It is believed that with further optimization of the structure size and autonomous navigation platform, the proposed soft microactuator has significant potential to function as an easy-to-manipulate multifunctional robot., (© 2024 The Authors. Small published by Wiley‐VCH GmbH.)

N6-methyladenosine (m6A) is the most prevalent post-transcriptional modification of RNAs and plays a key regulatory role in various biological processes. As a member of the insulin-like growth factor 2 mRNA-binding proteins (IGF2BPs) family, IGF2BP1 has recently demonstrated its ability to specifically bind m6A-modified sites within mRNAs and effectively regulate their mRNA stability. However, the precise roles of IGF2BP1 in mammalian skeletal muscle development, along with its downstream mRNA targets during myogenesis, have yet to be fully elucidated. Here, we observed that IGF2BP1 expression significantly decreased during myogenic differentiation. Knockdown of IGF2BP1 significantly inhibited myoblast proliferation while promoted myogenic differentiation. In contrast, IGF2BP1 overexpression robustly stimulated myoblast proliferation but suppressed their differentiation. Combined analysis of high-throughput sequencing and RNA stability assays revealed that IGF2BP1 can enhance fibroblast growth factor receptor 1 (FGFR1) mRNA stability and promote its translation in an m6A-dependent manner, thereby regulating its expression level and the Extracellular Signal-Regulated Kinase (ERK) pathway. Additionally, knockdown of FGFR1 rescued the phenotypic changes (namely increased cell proliferation and suppressed differentiation) induced by IGF2BP1 overexpression via attenuating ERK signaling. Taken together, our findings suggest that IGF2BP1 maintains the stability and translation of FGFR1 mRNA in an m6A-dependent manner, thereby inhibiting skeletal myogenesis through activation of the ERK signaling pathway. This study further enriches the understanding of the molecular mechanisms by which RNA methylation regulates myogenesis, providing valuable insights into the role of IGF2BP1-mediated post-transcriptional regulation in muscle development., Competing Interests: Declaration of competing interest The authors declare no conflict of interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The advent of smart grids has facilitated data-driven methods for detecting electricity theft, with a preponderance of research efforts focused on user electricity consumption data. The multi-dimensional power state data captured by Advanced Metering Infrastructure (AMI) encompasses rich information, the exploration of which, in relation to electricity usage behaviors, holds immense potential for enhancing the efficiency of theft detection. In light of this, we propose the Catch22-Conv-Transformer method, a multi-dimensional feature extraction-based approach tailored for the detection of anomalous electricity usage patterns. This methodology leverages both the Catch22 feature set and complementary features to extract sequential features, subsequently employing convolutional networks and the Transformer architecture to discern various types of theft behaviors. Our evaluation, utilizing a three-phase power state and daily electricity usage data provided by the State Grid Corporation of China, demonstrates the efficacy of our approach in accurately identifying theft modalities, including evasion, tampering, and data manipulation.

High-precision 3D point cloud data have various analyses and application use cases. This study aimed to achieve a more precise noise reduction of the raw 3D point cloud data of asphalt pavements obtained using 3D laser scanning. Hence, a noise-reduction algorithm integrating improved Gaussian filtering and coefficient of variation was developed. A portable laser scanner was used to collect raw, high-precision 3D point cloud data of surface textures from pavement slab samples prepared with three different types of asphalt mixtures: AC-13, SMA-13, and OGFC-13, as well as asphalt from the test sections of the Yakang Expressway. An improved Gaussian filtering and Gaussian filtering that extracts noise using the coefficient of variation were used to filter out the obvious outlier noise and small-scale burr noise, respectively. Finally, the filtering effect of the proposed algorithm, Gaussian filtering, median filtering, and mean filtering on raw 3D point cloud data of pavement textures was evaluated through subjective visual quality and objective index evaluations. The results showed that the proposed algorithm filters out noise while preserving the micro-texture structure information, outperforming Gaussian filtering, median filtering, and mean filtering., (© 2024. The Author(s).)

Using density functional theory combined with the first principles calculation method of non-equilibrium Green's function (NEGF-DFT), we studied the thermoelectric (TE) characteristics of one-dimensional γ-graphdiyne nanoribbons (γ-GDYNRs). The study found that the thermal conductivity of γ-GDYNRs has obvious anisotropy. At the same temperature and geometrical size, the lattice thermal conductivity of zigzag-edged γ-graphdiyne nanoribbons (γ-ZGDYNRs) is much lower than that of armchair-edged γ-graphdiyne nanoribbons (γ-AGDYNRs). We disclose the underlying mechanism for this intrinsic orientation. That is, γ-AGDYNRs have more phonon dispersion over the entire frequency range. Furthermore, the orientation dependence increases when the width of the γ-GDYNRs decreases. These excellent TE properties allow armchair-edged γ-graphdiyne nanoribbons with a planar width of 1.639 nm (γ-Z(2)GDYNRs) to have a higher power factor and lower thermal conductivity, ultimately resulting in a significantly higher TE conversion rate than other γ-GDYNR structures.

Objective: Cancer cell invasion is a critical cause of fatality in cancer patients. Physiologically relevant tumor models play a key role in revealing the mechanisms underlying the invasive behavior of cancer cells. However, most existing models only consider interactions between cells and extracellular matrix (ECM) components while neglecting the role of matrix stiffness in tumor invasion. Here, we propose an effective approach that can construct stiffness-tunable substrates using digital mirror device (DMD)-based optical projection lithography to explore the invasion behavior of cancer cells. The printability, mechanical properties, and cell viability of three-dimensional (3D) models can be tuned by the concentration of prepolymer and the exposure time. The invasion trajectories of gastric cancer cells in tumor models of different stiffness were automatically detected and tracked in real-time using a deep learning algorithm. The results show that tumor models of different mechanical stiffness can yield distinct regulatory effects. Moreover, owing to the biophysical characteristics of the 3D in vitro model, different cellular substructures of cancer cells were induced. The proposed tunable substrate construction method can be used to build various microstructures to achieve simulation of cancer invasion and antitumor screening, which has great potential in promoting personalized therapy.

This paper aims to reveal the interaction relationship between microcracks and macrocracks and the influence of the interaction on the crack propagation behavior. A theoretical model of asphalt concrete was established for the interaction between microcracks with different crack densities and a macrocrack. And a meso-structure model of AC-13 dense-graded asphalt concrete was established by combining the Talyor medium method and the DEM (discrete element method). Macro and micro parameters, such as the stress-strain characteristics, crack evolution parameters, and crack tip stress field, were obtained through a semi-circular bend virtual test and used to study the characteristics of crack propagation under the interaction between microcracks and the macrocrack. The results indicate that the interaction has an effect throughout the process of asphalt concrete damage, and shows shielding and acceleration effects as the microcrack density changes. When the microcrack density is low ( f 3 ≤ 0.8), the crack propagation process, which is affected by the interaction effect, exhibits significant differences, and the interaction effect shows the shielding effect. When the microcrack density is high ( f 3 > 0.8), the fracture stage is mainly affected by the interaction effect, which shows the acceleration effect. The results provide a predictive theoretical and numerical model for low-temperature cracking of asphalt pavement, and theoretical support for the design, maintenance, and upkeep of long-life pavement.

Basic helix-loop-helix (bHLH) transcription factors play various important roles in plant growth and development. In this study, a AabHLH48 was identified in the floral organ of Adonis amurensis, a perennial herb that can naturally complete flowering at extreme low temperatures. AabHLH48 was widely expressed in various tissues or organs of A. amurensis and was localized in the nucleus. Overexpression of AabHLH48 promotes early flowering in Arabidopsis under both photoperiod (12 h light/12 h dark and 16 h light/8 h dark) and temperature (22 and 18 °C) conditions. Transcriptome sequencing combined with quantitative real-time PCR analysis showed that overexpression of AabHLH48 caused a general upregulation of genes involved in floral development in Arabidopsis, especially for AtAGAMOUS-LIKE 8/FRUITFULL (AtAGL8/FUL). The yeast one-hybrid assay revealed that AabHLH48 has transcriptional activating activity and can directly bind to the promoter region of AtAGL8/FUL. These results suggest that the overexpression of AabHLH48 promoting early flowering in Arabidopsis is associated with the upregulated expression of AtAGL8/FUL activated by AabHLH48. This indicates that AabHLH48 can serve as an important genetic resource for improving flowering-time control in other ornamental plants or crops., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier GmbH. All rights reserved.)

Mammary gland bioreactors are promising methods for recombinant protein production. Human neutrophil peptide 1 (HNP1) exhibits antibacterial and immune-modulating properties. This study aims to establish a method to generate goats secreting HNP1 using the mammary gland as bioreactors. HNP1 transgenic goats were generated by using CRISPR/Cas9 technology to knock-in (KI) the HNP1 sequence into exon 7 of the goat β-casein (CSN2) gene under the control of the CSN2 promoter. One-cell stage embryos were cytoplasmically injected with a mixture of Cas9 mRNA, sgRNA, and a homologous plasmid including the T2A-HNP1 sequences, followed by transfer to recipient goats. A total of 22 live offspring goats were delivered, and 21 of these goats (95.45%) exhibited targeted edits at the CSN2 locus, and 2 female goats (9.09%) demonstrated successful HNP1 integration. Western blot and ELISA analyses confirmed the presence of HNP1 protein at high levels in the milk of these HNP1-positive goats, with mean concentrations of 22.10 µg/mL and 0.0092 µg/mL during the initial 60 days of lactation. Furthermore, milk from these transgenic goats exhibited notable antibacterial activity against Escherichia coli and Staphylococcus aureus, demonstrating the functionality of the expressed HNP1 protein. In conclusion, we established an efficient method for developing new transgenic goat lines as a mammary gland bioreactor, and the bioactive HNP1 protein secreted by the transgenic goat has the potential to combat microbial resistance., Competing Interests: The authors declare no competing financial interests.

Regional lung ventilation assessment is a critical tool for the early detection of lung diseases and postoperative evaluation. Biosensor-based impedance measurements, known for their non-invasive nature, among other benefits, have garnered significant attention compared to traditional detection methods that utilize pressure sensors. However, solely utilizing overall thoracic impedance fails to accurately capture changes in regional lung air volume. This study introduces an assessment method for lung ventilation that utilizes impedance data from the five lobes, develops a nonlinear model correlating regional impedance with lung air volume, and formulates an approach to identify regional ventilation obstructions based on impedance variations in affected areas. The electrode configuration for the five lung lobes was established through numerical simulations, revealing a power-function nonlinear relationship between regional impedance and air volume changes. An analysis of 389 pulmonary function tests refined the equations for calculating pulmonary function parameters, taking into account individual differences. Validation tests on 30 cases indicated maximum relative errors of 0.82% for FVC and 0.98% for FEV1, all within the 95% confidence intervals. The index for assessing regional ventilation impairment was corroborated by CT scans in 50 critical care cases, with 10 validation trials showing agreement with CT lesion localization results.

Timely and accurate estimation of cotton seedling emergence rate is of great significance to cotton production. This study explored the feasibility of drone-based remote sensing in monitoring cotton seedling emergence. The visible and multispectral images of cotton seedlings with 2 - 4 leaves in 30 plots were synchronously obtained by drones. The acquired images included cotton seedlings, bare soil, mulching films, and PE drip tapes. After constructing 17 visible VIs and 14 multispectral VIs, three strategies were used to separate cotton seedlings from the images: (1) Otsu's thresholding was performed on each vegetation index (VI); (2) Key VIs were extracted based on results of (1), and the Otsu-intersection method and three machine learning methods were used to classify cotton seedlings, bare soil, mulching films, and PE drip tapes in the images; (3) Machine learning models were constructed using all VIs and validated. Finally, the models constructed based on two modeling strategies [Otsu-intersection (OI) and machine learning (Support Vector Machine (SVM), Random Forest (RF), and K-nearest neighbor (KNN)] showed a higher accuracy. Therefore, these models were selected to estimate cotton seedling emergence rate, and the estimates were compared with the manually measured emergence rate. The results showed that multispectral VIs, especially NDVI, RVI, SAVI, EVI2, OSAVI, and MCARI, had higher crop seedling extraction accuracy than visible VIs. After fusing all VIs or key VIs extracted based on Otsu's thresholding, the binary image purity was greatly improved. Among the fusion methods, the Key VIs-OI and All VIs-KNN methods yielded less noises and small errors, with a RMSE (root mean squared error) as low as 2.69% and a MAE (mean absolute error) as low as 2.15%. Therefore, fusing multiple VIs can increase crop image segmentation accuracy. This study provides a new method for rapidly monitoring crop seedling emergence rate in the field, which is of great significance for the development of modern agriculture., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2024 Li, Wang, Cui, Wang, Li, Jiang, Shi, Song, Wang, Lv and Zhang.)

Graphdiyne (GDY), a two-dimensional carbon material with sp- and sp 2 -hybridization, is recognized for its unique electronic properties and well-dispersed porosity. Its versatility has led to its use in a variety of applications. The precise control of this material's properties is paramount for its effective utilization in nano-optical devices. One effective method of regulation, which circumvents the need for additional disturbances, involves the application of external stress. This technique provides a direct means of eliciting changes in the electronic characteristics of the material. For instance, when subjected to uniaxial stress, electron transfer occurs at the triple bond. This results in an armchair-edged graphdiyne nanoribbon (A(3)-GDYNR) with a planar width of 2.07 nm, which exhibits a subtle plasmon effect at 500 nm. Conversely, a zigzag-edged graphdiyne nanoribbon (Z(3)-GDYNR) with a planar width of 2.86 nm demonstrates a pronounced plasmon effect within the 250-1200 nm range. This finding suggests that the zigzag nanoribbon surpasses the armchair nanoribbon in terms of its plasmon effect. First principles calculations and ab initio molecular dynamics further confirmed that under applied stress Z(3)-GDYNR exhibits less deformation than A(3)-GDYNR, indicating superior stability. This work provides the necessary theoretical basis for understanding graphene nanoribbons (GDYNRs)., (© 2024. The Author(s).)

In this article, the linear and nonlinear optical properties of in-plane lateral MoSe 2 -WSe 2 heterostructures are theoretically investigated. The polarization-dependent strongest optical absorption in one-photon absorption occurs in charge transfer excited states, where electrons transfer from WSe 2 to MoSe 2 . This phenomenon is supported by the LUMO (lowest unoccupied molecular orbital) and HUMO (highest occupied molecular orbital) imaging obtained through scanning tunneling microscopy. The charge difference density and transition density matrix are used to interpret the electronic transitions, and these interpretations rely on the concept of transition density. The optical properties of two-photon absorption in its nonlinear optical process are significantly different from the excitation in one-photon absorption, where the strongest optical absorption is contributed from direct transition from the ground state to the final state without going through an intermediate excited state, due to the very large difference of permanent dipole moments between the excited and ground states. Our results also reveal directional fluorescence and physical mechanism of in-plane lateral MoSe 2 -WSe 2 heterostructures. Our work can provide insights into the physical mechanism of the optical properties of in-plane lateral MoSe 2 -WSe 2 heterostructures.

Flexible pressure sensors based on micro-/nanostructures can be integrated into robots to achieve sensitive tactile perception. However, conventional symmetric structures, such as pyramids or hemispheres, can sense only the magnitude of a force and not its direction. In this study, a capacitive flexible tactile sensor inspired by skin structures and based on an asymmetric microhair structure array to perceive directional shear force is designed. Asymmetric microhair structures are obtained by two-photon polymerization (TPP) and replication. Owing to the features of asymmetric microhair structures, different shear force directions result in different deformations. The designed device can determine the directions of both static and dynamic shear forces. Additionally, it exhibits large response scales ranging from 30 Pa to 300 kPa and maintains high stability even after 5000 cycles; the final relative capacitive change (ΔC/C 0 ) is <2.5%. This flexible tactile sensor has the potential to improve the perception and manipulation ability of dexterous hands and enhance the intelligence of robots., (© 2023 The Authors. Advanced Science published by Wiley-VCH GmbH.)

Residual current is an important monitoring quantity of a power system, and a current sensor plays an important role in detecting current. The substation environment is complex. In addition to the power frequency signal, residual current also has AC and DC components. But it is also affected by the stray magnetic field of the substation. Therefore, the accuracy of the current sensor demands higher requirements. The tunnel magnetoresistive sensor has the advantages of a stable operation, high efficiency, and energy saving, but it is easily affected by the external stray magnetic field during measurements, resulting in a large error. Therefore, this paper proposes a residual-current sensing monitoring system considering the magnetic shielding effect. The root mean square error of the magnetic shielding structure is only 0.572 mA, which can effectively reduce the influence of the external magnetic field and improve the detection accuracy. At the same time, the DC measurement error is less than 1%, the AC measurement error is less than 5%, and the hybrid AC/DC error is less than 8%. It has good response ability and can accurately detect residual current.

Graphyne (GY) and graphdiyne (GDY) have properties including unique sp- and sp 2 -hybrid carbon atomic structures, natural non-zero band gaps, and highly conjugated π electrons. GY and GDY have good application prospects in many fields, including catalysis, solar cells, sensors, and modulators. Under the influence of the boundary effect and quantum size effect, quasi-one-dimensional graphyne nanoribbons (GYNRs) and graphdiyne nanoribbons (GDYNRs) show novel physical properties. The various structures available give GYNRs and GDYNRs greater band structure and electronic properties, and their excellent physical and chemical properties differ from those of two-dimensional GY and GDY. However, the development of GYNRs and GDYNRs still faces problems, including issues with accurate synthesis, advanced structural characterization, the structure-performance correlation of materials, and potential applications. In this review, the structures and physical properties of quasi-one-dimensional GYNRs and GDYNRs are reviewed, their advantages and disadvantages are summarized, and their potential applications are highlighted. This review provides a meaningful basis and research foundation for the design and development of high-performance materials and devices based on GYNRs and GDYNRs in the field of energy.

Owing to the sluggish reaction kinetics, it is a promising yet challenging task to achieve the adequate electricity-driven catalytic oxidation of biomass-derived 5-hydroxymethylfurfural (HMF) in neutral conditions. Herein, we have prepared an elelctrocatalyst with interfacial coupling effect through in-situ growth of Cu phthalocyanine (CuPc) on Co 3 O 4 spinel (Co 3 O 4 /CuPc), which constructs an effective electrocatalytic system of HMF oxidation with overall oxidation value-added products yield and total Faraday efficiency up to 80% and 70%, respectively. The interfacial coupling effect between CuPc and Co 3 O 4 spinel improve catalytic activity by effectively boosting the interfacial charge transfer and reducing the formation energy of key *C 6 H 3 O 4 in the catalytic pathway according to the in situ Raman spectroscopy and DFT simulation. This work illustrates the significance of interfacial coupling effect for developing highly efficient electrocatalysts applied for neutral system of biomass oxidation., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Nanoscale quantum plasmon is an important technology that restricts the application of optics, electricity, and graphene photoelectric devices. Establishing a structure-effect relationship between the structure of graphene nanoribbons (GNRs) under stress regulation and the properties of plasmons is a key scientific issue for promoting the application of plasmons in micro-nano photoelectric devices. In this study, zigzag graphene nanoribbon (Z-GNR) and armchair graphene nanoribbon (A-GNR) models of specific widths were constructed, and density functional theory (DFT) was used to study their lattice structure, energy band, absorption spectrum, and plasmon effects under different stresses. The results showed that the Z-GNR band gap decreased with increasing stress, and the A-GNR band gap changed periodically with increasing stress. The plasmon effects of the A-GNRs and Z-GNRs appeared in the visible region, whereas the absorption spectrum showed a redshift trend, indicating the range of the plasmon spectrum also underwent significant changes. This study provides a theoretical basis for the application of graphene nanoribbons in the field of optoelectronics under strain-engineering conditions., (© 2023 Wiley-VCH GmbH.)

Photocatalytic reduction of CO 2 using solar energy is an effective means to achieve carbon neutrality. However, the photocatalytic efficiency still requires improvements. In this study, polyvinylidene fluoride (PVDF) ferroelectric/piezoelectric nanofiber membranes are prepared by electrospinning. Cadmium sulfide (CdS) nanosheets are assembled in situ on the surface of PVDF based on coordination between F - and Cd 2+ , and then Ag nanoparticles are deposited on CdS. Because of the synergistic effect between localized surface plasmon resonance of Ag nanoparticles and the built-in electric field of PVDF, the CO 2 photocatalytic reduction efficiency using PVDF/CdS/Ag under visible light irradiation is significantly higher than that of any combination of CdS, CdS/Ag, or PVDF/CdS. Under micro-vibration to simulate air flow, the CO 2 reduction efficiency of PVDF/CdS/Ag is three times higher than that under static conditions, reaching 240.4 µmol g -1 h -1 . The piezoelectric effect caused by micro-vibrations helps prevent the built-in electric field from becoming saturated with carriers and provides a continuous driving force for carrier separation., (© 2023 Wiley-VCH GmbH.)

Soil salinization greatly restricts crop production in arid areas for salinity stress can inhibit crop photosynthesis and growth. Chlorophyll fluorescence and photosynthetic gas exchange (CFPGE) parameters are important indicators of crop photosynthesis and have been widely used to evaluate the impacts of salinity stress on crop photosynthesis and growth. Remote sensing technology can quickly and non-destructively obtain crop information under salinity stress, however, at present, the distribution of spectral features of CFPGE parameters in different regions is still unclear. In this study (2019-2020), under salinity stress conditions, the spectral data of rapeseed leaves were acquired and the CFPGE parameters were simultaneously determined. Then, continuous wavelet transformation (CWT) and standard normal variate (SNV) transformation were utilized to preprocess the raw spectral data. After that, a CFPGE parameter estimation model was constructed by using the partial least squares regression (PLSR) algorithm and the support vector machines (SVM) algorithm based on the spectral features in the red region (600-800 nm) and those in the red, blue-green (350-600 nm), and near-infrared (800-2500 nm) regions. The results showed that the spectral features of CFPGE parameters could be extracted by successive projections algorithm (SPA) based on the CWT preprocessing. The CFPGE parameter estimation model constructed based on the spectral features in the red region (675 nm, 680 nm, 688 nm, 749 nm, and 782 nm) had the highest Fv/Fm estimation accuracy on day 30, with R 2 c, R 2 p, and RPD of 0.723, 0.585, and 1.68, respectively. Based on this, the spectral features (578 nm, 976 nm, 1088 nm, 1476 nm, and 2250 nm) in the blue-green and near-infrared regions were added in the variables for modeling, which significantly improved the accuracy and stability of the model, with R 2 c, R 2 p, and RPD of 0.886, 0.815, and 2.58, respectively. Therefore, the fusion of the spectral features in the red, blue-green, and near-infrared regions could improve the estimation accuracy of rapeseed leaf CFPGE parameters. This study will provide technical reference for rapid estimation of photosynthetic performance of crops under salinity stress in arid and semi-arid areas., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2023 Wang, Tian, Wang, Cui, Shi, Song, Li, Li, Zhong and Zhang.)

Single-molecule plasmas are widely used in spectroscopic studies and plasma devices, and the organic conjugated molecular chain of poly (benzodifurandione) (PBFDO) has excellent electrical conductivity and unique electronic structure. Therefore, an in-depth theoretical study of the spectroscopic, charge transfer and electron transport properties of PBFDO polymers and the analysis of physical mechanisms are essential. In this work, the absorption spectra of neutral and charged PBFDO polymers of different sizes and periodic systems of PBFDO polymers are studied theoretically. The charge transfer modes of the different absorption peaks are also given. The Raman and resonance Raman properties of long-chain PBFDO polymers under 514 nm laser were revealed. The electron transport properties and Current-Voltage Characteristic (I-V) Curves of PBFDO devices were also investigated. This work will provide the necessary theoretical guidance for the application of PBFDO in the field of nanoscale optoelectronics and the design of devices., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

An active heterostructure with smart-response material used as "muscle" and inactive material as "skeleton" can deform over time to respond to external stimuli. 4D printing integrated with two-photon polymerization technology and smart material allows the material or characteristic distribution of active heterostructures to be defined directly at the microscale, providing a huge programmable space. However, the high degree of design freedom and the microscale pose a challenge to the construction of micromachines with customized shape morphing. Here, a reverse design strategy based on multi-material stepwise 4D printing is proposed to guide the structural design of biomimetic micromachines. Inspired by the piecewise constant curvature model of soft robot, a reverse design algorithm based on the Timoshenko model is developed. The algorithm can approximate 2D features to a constant-curvature model and determine an acceptable material distribution within the explored printing range. Three Chinese "Long" (Chinese dragon heralds of good fortune) designed by the strategy can deform to the customized shape. In addition, a microcrawler printed using this method can imitate a real inchworm gait. These results demonstrate that this method can be an efficient tool for the action or shape design of bionic soft microrobots or micromachines with predetermined functions., (© 2023 Wiley-VCH GmbH.)

In this work, the physical mechanisms of three highly efficient circularly polarized luminescent materials are introduced. The UV-vis spectra are plotted; the transition properties of their electrons at the excited states are investigated using a combination of the transition density matrix (TDM) and the charge difference density (CDD); combining the distribution of electron clouds, the essence of charge transfer excitation in three structures is explained. The resonance Raman spectrum of the three structures at the S 1 and S 2 excited states are calculated. The M, M-4 and M, M-5 structures are found to produce novel chirality by electronic circular dichroism (ECD) spectrum, and the reasons for the chirality of the M, M-4 and M, M-5 structures are discussed by analyzing the density of transition electric/magnetic dipole moments (TEDM/TMDMs) in different orientations. Finally, the Raman optical activity (ROA) of M, M-4, and M, M-5 are calculated, and the spectra are plotted. This study will provide guidance for the application of carbon-based nanomaterials in organic electronic devices, solar cells, and optoelectronics.

Key Message: We introduced the candidate gene DsHSP70 into Arabidopsis thaliana, resulting in male gametophyte sterility and abnormal degeneration of sepals and petals. Cytoplasmic male sterility (CMS) is a useful tool for hybrid production. However, the regulatory mechanism of CMS in Dianthus spiculifolius remains unclear. In this study, we investigated whether male-sterile line of D. spiculifolius has a malformed tapetum and fails to produce normal fertile pollen. RNA sequencing technology was used to compare the gene expression patterns of the D. spiculifolius male-sterile line and its male fertility maintainer line during anther development. A total of 12,365 differentially expressed genes (DEGs) were identified, among which 1765 were commonly expressed in the S1, S2 and S3 stages. Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) analyses indicated that these DEGs were mainly involved in oxidation-reduction processes, signal transduction and programmed cell death. Additionally, weighted correlation network analysis (WGCNA) showed that three modules may be related to male sterility. A putative regulatory pathway for the male sterility traits was constructed based on the reproductive development network. After introducing the candidate DsHSP70 gene into Arabidopsis thaliana, we found that overexpressing plants showed anther abortion and shorter filaments, and accompanied by abnormal degeneration of sepals and petals. In summary, our results identified potential candidate genes and pathways related to CMS in D. spiculifolius, providing new insights for further research on the mechanism of male sterility., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Bone marrow mesenchymal stem cells (BMSCs) are suggested as candidates for neurodegeneration therapy by autologous stem cells to overcome the lack of neural stem cells in adults. However, the differentiation of BMSCs into functional neurons is a major challenge for neurotherapy. Herein, a methodology has been proposed to induce functional neuronal differentiation of BMSCs on a conductive three-dimensional graphene framework (GFs) combined with a rotating magnetic field. A wireless electrical signal of about 10 μA can be generated on the surface of GFs by cutting the magnetic field lines based on the well-known electromagnetic induction effect, which has been proven to be suitable for inducing neuronal differentiation of BMSCs. The enhanced expressions of the specific genes/proteins and apparent Ca 2+ intracellular flow indicate that BMSCs cultured on GFs with 15 min/day rotating magnetic field stimulation for 15 days can differentiate functional neurons without any neural inducing factor. The animal experiments confirm the neural differentiation of BMSCs on GFs after transplantation in vivo , accompanied by stimulation of an external rotating magnetic field. This study overcomes the lack of autologous neural stem cells for adult neurodegeneration patients and provides a facile and safe strategy to induce the neural differentiation of BMSCs, which has potential for clinical applications of neural tissue engineering.

In recent years, the improvement of soil cadmium (Cd) contamination remediation effect of biochar by modification has received wide attention. However, the effect of combined modification on biochar performance in soil Cd contamination remediation and the mechanism are still unclear. In this study, cotton straw biochar and maize straw biochar were co-modified by KOH (0, 3, 5 mol L -1 ), K 3 PO 4 , and urea. Then, two modified biochars with high Cd adsorption capacity were selected to test the soil Cd contamination remediation effect through a pot experiment. The results showed that the combined modification by using KOH, K 3 PO 4 , and urea significantly increased the specific surface area and nitrogen (N) and phosphorus (P) contents of biochar, providing more adsorption sites for Cd. Among the modified biochar, the cotton straw biochar modified with KOH (3 mol L -1 ), K 3 PO 4 , and urea (m3-CSB) had the highest adsorption capacity (111.25 mg g -1 ), which was 7.86 times that of cotton straw biochar (CSB). The m3-CSB for adsorption isotherm and kinetics of Cd conformed to the Langmuir model and Pseudo-second-order kinetic equation, respectively. In the pot experiment, under different exogenous Cd levels (0 (Cd0), 4 (Cd4), and 8 (Cd8) mg kg -1 ), m3-CSB treatment decreased soil available Cd content the most (51.68%-63.4%) compared with other biochar treatments. Besides, m3-CSB treatment significantly promoted the transformation of acid-soluble Cd to reducible, oxidizable, and residual Cd, reducing the bioavailability of Cd. At the Cd4 level, the application of m3-CSB significantly reduced cotton Cd uptake compared to CK, and the maximum reduction of Cd content in cotton fibers was as high as 81.95%. Therefore, cotton straw biochar modified with KOH (3 mol L -1 ), K 3 PO 4 , and urea has great potential in the remediation of soil Cd contamination., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier Inc.)

Arsenic pollution in environment has always been an important environmental problem that has attracted wide attention in recent years. Adsorption is one of the main methods of treatment for arsenic in the aqueous solution and soil because of the advantages of high efficiency, low cost and wide application. Firstly, this report summarizes the commonly and widely used adsorbent materials such as metal-organic frameworks, layered bimetallic hydroxides, chitosan, biochar and their derivatives. The adsorption effects and mechanisms of these materials are further discussed, and the application prospects of these adsorbents are considered. Meanwhile, the gaps and deficiencies in the study of adsorption mechanism was pointed out. Then, this study comprehensively evaluated the effects of various factors on arsenic transport, including (i) the effects of pH and redox potential on the existing form of As; (ii) complexation mechanism of dissolved organic matter and As; (iii) factors affecting the plant enrichment of As. Finally, the latest scientific researches on microbial remediation of arsenic and the mechanisms were summarized. The review finally enlightens the subsequent development of more efficient and practical adsorption material., Competing Interests: Declaration of competing interest No conflict of interest exists in the submission of this manuscript, and the manuscript is approved by all authors for publication. I would like to declare on behalf of my co-authors that the work described was original research that has not been published previously, and not under consideration for publication elsewhere, in whole or in part., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Dehydro[10]annulene had been prepared experimentally recently, which is considered to be a highly rigid structure with planar configuration. In this paper, the electronic structure and bonding character of dehydro[10]annulene had been studied by means of molecular orbital (MO), density of states (DOS), bond order (BO) and interaction region indicator (IRI) analyses. The delocalization characters of out-of-plane and in-plane π-electrons (π out - and π in -electrons) of the bond regions were studied by using localized orbital locator (LOL). The anisotropy of the induced current density (AICD), iso-chemical shielding surface (ICSS) and anisotropy of the gauge-including magnetically induced current (GIMIC) were used to investigate the molecular response to external magnetic field, including the induced ring current and the magnetic shielding characteristic. The results showed that the electron delocalization of dehydro[10]annulene is mainly contributed by π out system. The apparent clockwise current in the π out system proved that dehydro[10]annulene is π out aromatic. Finally, the photophysical properties and (hyper)polarizability of dehydro[10]annulene were studied by TD-DFT calculation. The results showed that dehydro[10]annulene has strong local excitation characters. Its (hyper)polarizability decreases with the increase of frequency and has the characteristics of nonlinear anisotropy., (© 2023 Wiley-VCH GmbH.)

The one-photon absorption properties (OPA), two-photon absorption properties (TPA), electronic circular dichroism (ECD) spectra and partial DOS (PDOS) of a twist bilayer graphdiyne nanodisk (TwBLGDY-ND) were investigated by using a variety of quantum chemistry and wave function analyses. The physical mechanism of the twist bilayer graphdiyne nanodisk (TwBLGDY) with optical properties regulated by twisting angles was revealed. The results show that the twist angle makes the TwBLGDY form a moiré superlattice structure, and electron excitation mainly occurs in the first ring of the moiré superlattice structure. The contribution of atomic orbitals in these fragments to transition dipole moments is greater and electronic transitions are more likely to occur. When the twist angle increases from 0° to 15°, the absorption spectrum of the system is red shifted, which is mainly due to the enhancement of electron excitation characteristics. When the twist angle increases from 15° to 27.5°, the absorption spectrum of the system is blue shifted, due to the enhanced charge transfer within the layer. On the other hand, the twist angle can regulate the TPA absorption cross section of the system to enhance the intensity of the absorption spectrum. The twist angle can also regulate chirality by adjusting the spatial distribution of electric dipole transition and magnetic dipole transition. This study can provide theoretical guidance for constructing chiral optical devices based on the TwBLGDY structure.

Radar detection of maritime targets plays an important role in marine environment monitoring. For civil maritime detection in the areas of inshore coastal, pulse-compression radar is universally used owing to its low cost. The complex sea clutter in the practical application will greatly affect the received radar echoes. Due to the inability to accurately describe the differences in characteristics between sea clutter and maritime targets, the detection performance of methods based on mathematical derivation is not satisfactory in actual deployment. Recently, neural-based methods have made strides in many pattern recognition tasks, such as computer vision and natural language processing. The sophisticated deep neural models can be applied to different downstream tasks due to their powerful learning ability. Inspired by this idea, we propose a maritime radar target detection method in sea clutter based on deep learning. To better model the sequence correlation of radar echoes, we propose a Self-Adaption Local Augmented Long Short-Term Memory (SALA-LSTM) structure. The proposed SALA-LSTM integrates adaptive convolution into vanilla LSTM cells, which not only maintains the inherent overall sequence modeling ability of vanilla LSTM, but also strengthens its ability to perceive the correlation on a small scale in the local scope. Based on SALA-LSTM and other neural structures, we propose a radar target detection network. A measured dataset containing different typical scenarios is utilized to evaluate the detection probability and false alarm rate. The detection performance of our proposed network is superior to that of the existing methods., (© 2023. The Author(s).)

Soil salinization is one of the main causes of land degradation in arid and semi-arid areas. Timely and accurate monitoring of soil salinity in different areas is a prerequisite for amelioration. Hyperspectral technology has been widely used in soil salinity monitoring due to its high efficiency and rapidity. However, vegetation cover is an inevitable interference in the direct acquisition of soil spectra during crop growth period, which greatly limits the monitoring of soil salinity by remote sensing. Due to high soil salinity could lead to difficulty in plants' water absorption, and inhibit plant dry matter accumulation, a method for monitoring root zone soil salinity by combining vegetation canopy spectral information and crop aboveground growth parameters was proposed in this study. The canopy spectral information was acquired by a spectroradiometer, and then variable importance in projection (VIP), competitive adaptive reweighted sampling (CARS), and random frog algorithm (RFA) were used to extract the salinity spectral features in cotton canopy spectrum. The extracted features were then used to estimate root zone soil salinity in cotton field by combining with cotton plant height, aboveground biomass, and shoot water content. The results showed that there was a negative correlation between plant height/aboveground biomass/shoot water content and soil salinity in 0-20, 0-40, and 0-60 cm soil layers at different growth stages of cotton. Spectral feature selection by the three methods all improved the prediction accuracy of soil salinity, especially CARS. The prediction accuracy based on the combination of spectral features and cotton growth parameters was significantly higher than that based on only spectral features, with R 2 increasing by 10.01%, 18.35%, and 29.90% for the 0-20, 0-40, and 0-60 cm soil layer, respectively. The model constructed based on the first derivative spectral preprocessing, spectral feature selection by CARS, cotton plant height, and shoot water content had the highest accuracy for each soil layer, with R 2 of 0.715,0.769, and 0.742 for the 0-20, 0-40, 0-60 cm soil layer, respectively. Therefore, the method by combining cotton canopy hyperspectral data and plant growth parameters could significantly improve the prediction accuracy of root zone soil salinity under vegetation cover conditions. This is of great significance for the amelioration of saline soil in salinized farmlands arid areas., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2023 Shi, Song, Wang, Lv, Tian, Wang, Li, Zhong and Jiang.)

Key Message: CIPAS8 is a novel Cd-influx and Co-efflux transporters, and Ser86 and Cys128 might play a decisive role in Co-binding and translocation. Cadmium (Cd) is among the most toxic heavy metals and is a widespread environmental pollutant. Cobalt (Co) is a mineral nutrient that is essential for plant growth and development, but high concentrations may be toxic. Cadmium-induced protein AS8 (CIPAS8) is widely distributed among plant species and might be induced by heavy metals, but its function has not been studied previously. In this study, Populus euphratica PeCIPAS8 and Salix linearistipularis SlCIPAS8 were investigated. The transcription of both genes was significantly enhanced under Cd and Co stresses. PeCIPAS8 and SlCIPAS8 conferred sensitivity to Cd in transgenic yeast, allowing higher quantities of Cd to accumulate within the cells, whereas SlCIPAS8 also conferred tolerance to Co and reduced Co accumulation. The determinants of substrate selectivity of the SlCIPAS8 protein were examined by site mutagenesis, which indicated that the Ser at 86th (S86) substituted for Arg (R) [S86R] and Cys at 128th (C128) substituted for Ser [C128S] mutations limited the protein's capability for Co translocation. These results suggested that PeCIPAS8 and SlCIPAS8 may be involved in Cd uptake into the plant cell. SlCIPAS8 can reduce excess Co accumulation to maintain intracellular Co homeostasis, and the site mutations S86R and C128S were essential for Co transport. These findings provide insight into the function of CIPAS8 and highlight its potential for utilization in phytoremediation applications., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Tunnel magnetoresistance (TMR) can measure weak magnetic fields and has significant advantages for use in alternating current/direct current (AC/DC) leakage current sensors for power equipment; however, TMR current sensors are easily perturbed by external magnetic fields, and their measurement accuracy and measurement stability are limited in complex engineering application environments. To enhance the TMR sensor measurement performance, this paper proposes a new multi-stage TMR weak AC/DC sensor structure with high measurement sensitivity and anti-magnetic interference capability. The front-end magnetic measurement characteristics and interference immunity of the multi-stage TMR sensor are found to be closely related to the multi-stage ring size design via finite element simulation. The optimal size of the multipole magnetic ring is determined using an improved non-dominated ranking genetic algorithm (ACGWO-BP-NSGA-II) to derive the optimal sensor structure. Experimental results demonstrate that the newly designed multi-stage TMR current sensor has a measurement range of 60 mA, a fitting nonlinearity error of less than 1%, a measurement bandwidth of 0-80 kHz, a minimum AC measurement value of 85 μA and a minimum DC measurement value of 50 μA, as well as a strong external electromagnetic interference. The TMR sensor can effectively enhance measurement precision and stability in the presence of intense external electromagnetic interference.

In this work, we theoretically investigate the linear and nonlinear optical absorption properties of open triangulene spin chains and cyclic triangulene spin chains in relation to their lengths and shapes. The physical mechanism of local excitation within the triangular alkene unit and the weak charge transfer between the units are discussed. The uniformly distributed electrostatic potential allows the system to have a small permanent dipole moment that blocks the electronic transition in the light excitation such that the electronic transition can only be carried out between adjacent carbon atoms. The one-photon absorption (OPA) spectra and two-photon absorption (TPA) spectra are red-shifted with the addition of triangulene units compared to N = 3TSCs (triangulene spin chains, TSCs). Here, TPA is mainly caused by the first step of the transition. The length of the spin chain has a significant adjustment effect on the photon cross-section. TSCs of different lengths and shapes can control chirality by adjusting the distribution of the electric dipole moment and transition magnetic dipole moment. These analyses reveal the photophysical properties of triangulene and provide a theoretical basis for studying the photophysical properties of triangulene and its derivatives.

The status of zinc oxide (ZnO) arresters is directly related to the safety of power grids. However, as the service life of ZnO arresters increases, their insulation performance may decrease due to factors such as operating voltage and humidity, which can be identified through the measurement of leakage current. Tunnel magnetoresistance (TMR) sensors with high sensitivity, good temperature stability, and small size are excellent for measuring leakage current. This paper constructs a simulation model of the arrester and investigates the deployment of the TMR current sensor and the size of the magnetic concentrating ring. The arrester's leakage current magnetic field distribution under different operating conditions is simulated. The simulation model can aid in optimizing the detection of leakage current in arresters using TMR current sensors, and the findings serve as a basis for monitoring the condition of arresters and improving the installation of current sensors. The TMR current sensor design offers potential advantages such as high accuracy, miniaturization, and ease of distributed application measurement, making it suitable for large-scale use. Finally, the validity of the simulations and conclusions is verified through experiments.

The striking chiral optical properties of carbon nanostructures are closely related to the precise three-dimensional spatial arrangement (interaction) of carbon atoms. This work investigated the chiral optical properties of three different structures of all-benzene catenane and trefoil knot regulated by van der Waals (vdW) forces using density functional theory (DFT) calculations and wave function analysis. We systematically illustrate how molecular electrical polarization modulates the chiral optical deflection of alkane oligomers under the induction of van der Waals forces. In this work, the UV-vis spectra, transition density matrices (TDM), and electron-hole density diagrams of three molecules have been studied. Combined with a visualization method to represent the effect of molecular polarization on transition electric/magnetic dipole moments (TEDMs\TMDMs), the results show that vdW interactions can induce chirality deflection in polymers. This mechanism provides a clear direction for designing polymers with specific chirality: by modifying the structure, vdW interactions can be generated in specific regions, and then the chirality of the molecule can be precisely regulated. This will help us to establish a strategy for precisely-oriented design of chiral optical materials, and provide guidance for the application and development of optoelectronic materials in specific fields., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

The electronic states of the twist bilayer graphene (TBG) moiré superlattice are usually regulated by the rotation angle, applied electric field, applied magnetic field, carrier concentration and applied stress, and thus exhibit novel physical properties. Squeezing, that is, applying vertical compressive stress to the graphene layers, has profound significance in regulating the photoelectric properties of the moiré superlattice and constructing optical nanodevices. This paper presents the photoelectric properties of a TBG moiré superlattice with a twist angle of 13.17° and tunability under vertical stress. Interlayer distance decreases nonlinearly with compressive stress from 0 to 10 GPa, giving rise to weakened interlayer coupling compared to a Bernal-stacked graphene bilayer and an enhanced repulsive effect between the layers. The calculated Bloch wave functions show a strong dependence on stress. With the increase in stress, the band gaps of the system present a nonlinear increase, which induces and enhances the interlayer charge transfer and leads to the redshift of the absorption spectrum of the moiré superlattice system. By analyzing the differences in the Bloch wave function and charge density differences, we explain the nature of the physical mechanism of photoelectric property change in a stress-regulated twist superlattice system. This study provides a theoretical basis for the identification of piezoelectric properties and the stress regulation of photoelectric devices based on TBG, and also provides a feasible method for regulating the performance of TBG.

Background: Biologics and Janus kinase (JAK) inhibitors are commonly used to improve ankylosing spondylitis (AS) symptoms if conventional treatments are ineffective or unsuitable. This systematic review aimed to compare the therapeutic effects and safety of JAK inhibitors, tumor necrosis factor-alpha (TNF-α) inhibitors, and interleukin (IL) inhibitors in patients with AS., Methods: We retrieved literature from various databases including Web of Science, Cochrane, Embase, PubMed, China National Knowledge Infrastructure, Weipu Journal Database, SinoMed, and WanFang Data up to February 1, 2023, and evaluated the quality of the included RCTs using the Cochrane risk-of-bias tool. R 4.1.3, STATA 15.1 were employed for network meta-analyses., Results: We identified 48 eligible articles including 8,937 patients. Ten articles were rated as "low risk", 5 as "high risk", and the others as "some concerns". In terms of efficacy, IL-17, IL-6, and JAK inhibitors were compared with TNF-α inhibitors in ASAS20 (RR =0.81, 95% CI: 0.66-0.98; RR =0.57, 95% CI: 0.35-0.95; RR =0.77, 95% CI: 0.60-0.99). IL-6 inhibitors were compared with TNF-α inhibitors in ASAS5/6 (RR =0.39, 95% CI: 0.16-0.98). IL-23, JAK inhibitors were compared with TNF-α inhibitors in BASDAI50 (RR =0.35, 95% CI: 0.20-0.60; RR =0.70, 95% CI: 0.49-0.98). IL-17 inhibitors were compared with IL-23 and IL-6 inhibitors in BASFI (MD =-1.05, 95% CI: -1.65--0.51; MD =-1.46, 95% CI: -2.02--0.97). In terms of safety, IL-6 inhibitors were compared with JAK, TNF-α inhibitors in AEs (RR =1.38, 95% CI: 1.06-1.88; RR =1.30, 95% CI: 1.01-1.70)., Conclusions: TNF-α inhibitors are significantly superior to both IL and JAK inhibitors, and may be the preferable option to deal with the rapid progression of AS and severe functional limitations. IL-17 inhibitors may better improve the BASDAI50 response compared with JAK, IL-23, and TNF-α inhibitors. The efficacy and safety of IL-6 inhibitors are inferior to other types of drugs, indicating the low efficacy and high risk of IL-6 inhibitors., Competing Interests: Conflicts of Interest: All authors have completed the ICMJE uniform disclosure form (available at https://atm.amegroups.com/article/view/10.21037/atm-23-195/coif). The authors have no conflicts of interest to declare., (2023 Annals of Translational Medicine. All rights reserved.)

Defects, such as twisting, in fused aromatic hydrocarbons disrupt the plane of the π orbital. The twisted structure induces an electric field in the system and affects the spectra. In this work, theoretical studies show that the intramolecular electric field within a distinctly twisted structure is larger than that of other molecules. In addition, the spectral study shows that the degree of charge transfer and the magnetic transition dipole in the electrostatic potential extremum region of the molecular electric field were significantly improved, which affected the optical absorption and chiral optical behavior of the molecule. The discovery of this theoretical regulation law will provide a solid foundation for the electric-field-induced regulation of optical properties and will promote the precise design and synthesis of optoelectronic molecules with inner electric fields.

Toxic heavy metal contaminants seriously affect plant growth and human health. Reducing the accumulation of toxic metals by phytoremediation is an effective way to solve this environmental problem. Dianthus spiculifolius Schur is an ornamental plant with strong cold and drought tolerance. Because of its fast growth, well-developed root system, and large accumulation of biomass, D. spiculifolius has potential applications as a heavy metal hyperaccumulator. Therefore, the aim of this study was evaluate the ability of D. spiculifolius and other Dianthus species to remediate heavy metals, with an ultimate goal to identify available genetic resources for toxic metal removal. The cadmium (Cd) and lead (Pb) tolerance and accumulation of six Dianthus species were analyzed comparatively in physiological and biochemical experiments. Compared with the other Dianthus species, D. spiculifolius showed higher tolerance to, and greater accumulation of, Cd and Pb. Second-generation transcriptome analysis indicated that glutathione transferase activity was increased and the glutathione metabolism pathway was enriched with genes encoding antioxidant enzymes (DsGST, DsGST3, DsGSTU10, DsGGCT2-1, and DsIDH-2) that were up-regulated under Cd/Pb treatment by RT-qPCR in D. spiculifolius. When expressed in yeast, DsGST, DsGST3, DsGSTU10 and DsIDH-2 enhanced Cd or Pb tolerance. These results indicate that D. spiculifolius has potential applications as a new ornamental hyperaccumulator plant, and that antioxidant enzymes might be involved in regulating Cd/Pb accumulation and detoxification. The findings of this study reveal some novel genetic resources that can be used to breed new plant varieties that tolerate and accumulate heavy metals., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022. Published by Elsevier Ltd.)

Nitrogen application could alleviate salt stress on crops, but the specific physiological mechanism is still unclear. Therefore, in this study, a pot experiment was conducted to explore the effects of different application rates of nitrogen (0, 0.15, 0.30, and 0.45 g·kg -1 ) on the growth parameters, osmotic adjustment, reactive oxygen species scavenging, and photosynthesis of rapeseed seedlings planted in the soils with different concentrations of sodium chloride (1.5, 3.5, 5.5, and 7.5 g·kg -1 ). The results showed that nitrogen could alleviate the inhibition of salt on rapeseed growth, and improve the antioxidant enzyme activities and the contents of non-enzymatic substances, K + , soluble protein (SP), soluble sugar (SS), and proline. Besides, there was a significant correlation between the indexes of active oxygen scavenging system, osmoregulation system, and photosynthesis. Therefore, applying appropriate amount of nitrogen can promote the growth and development of rapeseed seedlings under salt stress, accelerate the scavenging of reactive oxygen species, maintain osmotic balance, and promote photosynthesis. This study will improve our understanding on the mechanism by which nitrogen application alleviates salt stress to crops.

Since the successful synthesis of [6,6]carbon nanobelt (CNB), [8,8]CNB and [12,12]CNB have been synthesized successively. CNBs with different sizes ([2N,2N]CNB; N = 2, 3, 4, 5, 6, 7, and 8) have quantum size effects and exhibit completely different optical properties. In this work, the linear and nonlinear optical properties and spectral changes of [2N,2N]CNB are studied based on density functional theory (DFT). The molecular volume, pore volume, and stability of [2N,2N]CNB are investigated. The electron transition mechanism of the one-photon absorption (OPA) and two-photon absorption (TPA) spectra of [2N,2N]CNB is explained, and the extrapolation formula between the wavelength of the absorption peak and the absorption coefficient (ε) and size is given. The infrared (IR) and Raman spectra of [2N,2N]CNB are calculated, and the vibrational modes of characteristic peaks are provided. Finally, the nonlinear optical properties of [2N,2N]CNB are studied, which reflect the anisotropy of molecular polarization. The extrapolation formulas for the polarizability (α) and second hyperpolarizability (γ) of [2N,2N]CNB under different external fields are given. The extrapolation formulas given in this work will help to predict the linear and nonlinear optical properties of arbitrary [2N,2N]CNB beyond computational power, laying the foundation for the practical application of [2N,2N]CNB's theoretical basis.