Search

We develop a framework for controlling and investigating reversible ionic transfer between two solid metal oxides layers by examining field-driven changes in electrical properties of the thin film bilayer oxide system Pr 0.1 Ce 0.9 O 2 /La 1.85 Ce 0.15 CuO 4 (PCO/LCCO). We show that we can reversibly redistribute oxygen ions by applied voltage in a highly controlled and reversible fashion near ambient temperatures over large oxygen ion activity limits, which, for the first time, is directly interpretable by defect chemical models. This allowed us to determine how defect concentrations in each layer systematically varied with voltage and the subsequent impact on each film's conductance. These results showcase the relevance and applicability of defect chemical models, traditionally considered only at elevated temperatures, to the development of bilayer devices of importance to neuromorphic memory applications. This allows for a more systematic approach for studying and understanding the solid-solid exchange process in electrochemically controlled microelectronic devices. Moreover, our work sets the foundation for the development of large-area field-driven defect-controlled bilayer switching devices with potential application to a broad array of functionally modulated devices.

Newly discovered opto-ionic effects in metal oxides provide unique opportunities for functional ceramic applications. The authors generalize the recently demonstrated grain boundary opto-ionic effect observed in solid electrolyte thin films under ultraviolet (UV) irradiation to a radiation-ionic effect that can be applied to bulk materials and used for gamma-rays (γ-rays) detection. Near room temperature, lightly doped Gd-doped CeO 2 , a polycrystalline ion conducting ceramic, exhibits a resistance ratio change ≈10 3 and reversible response in ionic current when exposed to 60 Co γ-ray (1.1 and 1.3 MeV). This is attributed to the steady state passivation of space charge barriers at grain boundaries, that act as virtual electrodes, capturing radiation-induced electrons, in turn lowering space charge barrier heights, and thereby exclusively modulating the ionic carrier flow within the ceramic electrolytes. Such behavior allows significant electrical response under low fields, that is, < 2 V cm -1 , paving the way to inexpensive, sensitive, low-power, and miniaturizable solid-state devices, uniquely suited for operating in harsh (high temperature, pressure, and corrosive) environments. This discovery presents opportunities for portable and/or scalable radiation detectors benefiting geothermal drilling, small modular reactors, nuclear security, and waste management., (© 2024 The Authors. Advanced Materials published by Wiley‐VCH GmbH.)

Metal oxides are an important class of functional materials, and for many applications, ranging from solid oxide fuel/electrolysis cells, oxygen permeation membranes, and oxygen storage materials to gas sensors (semiconducting and electrolytic) and catalysts, the interaction between the surface and oxygen in the gas phase is central. Ubiquitous Si-impurities are known to impede this interaction, commonly attributed to the formation of glassy blocking layers on the surface. Here, the surface oxygen exchange coefficient (k chem ) is examined for Pr 0.1 Ce 0.9 O 2-δ (PCO), a model mixed ionic electronic conductor, via electrical conductivity relaxation measurements, and the area-specific resistance (ASR) by electrochemical impedance spectroscopy. It is demonstrated that even low silica levels, introduced by infiltration, depress k chem by a factor 4000, while the ASR increases 40-fold and we attribute this to its acidity relative to that of PCO. The ability to fully regenerate the poisoned surface by the subsequent addition of basic Ca- or Li-species is further shown. This ability to not only recover Si-poisoned surfaces by tuning the relative surface acidity of an oxide surface, but subsequently outperform the pre-poisoned response, promises to extend the operating life of materials and devices for which the catalytic oxygen/solid interface reaction is central., (© 2022 The Authors. Advanced Materials published by Wiley-VCH GmbH.)

Exsolution is a recent advancement for fabricating oxide-supported metal nanoparticle catalysts via phase precipitation out of a host oxide. A fundamental understanding and control of the exsolution kinetics are needed to engineer exsolved nanoparticles to obtain higher catalytic activity toward clean energy and fuel conversion. Since oxygen release via oxygen vacancy formation in the host oxide is behind oxide reduction and metal exsolution, we hypothesize that the kinetics of metal exsolution should depend on the kinetics of oxygen release, in addition to the kinetics of metal cation diffusion. Here, we probe the surface exsolution kinetics both experimentally and theoretically using thin-film perovskite SrTi 0.65 Fe 0.35 O 3 (STF) as a model system. We quantitatively demonstrated that in this system the surface oxygen release governs the metal nanoparticle exsolution kinetics. As a result, by increasing the oxygen release rate in STF, either by reducing the sample thickness or by increasing the surface reactivity, one can effectively accelerate the Fe 0 exsolution kinetics. Fast oxygen release kinetics in STF not only shortened the prereduction time prior to the exsolution onset, but also increased the total quantity of exsolved Fe 0 over time, which agrees well with the predictions from our analytical kinetic modeling. The consistency between the results obtained from in situ experiments and analytical modeling provides a predictive capability for tailoring exsolution, and highlights the importance of engineering host oxide surface oxygen release kinetics in designing exsolved nanocatalysts.

Grain boundary conductivity limitations are ubiquitous in material science. We show that illumination with above-bandgap light can decrease the grain boundary resistance in solid ionic conductors. Specifically, we demonstrate the increase of the grain boundary conductance of a 3 mol% Gd-doped ceria thin film by a factor of approximately 3.5 at 250 °C and the reduction of its activation energy from 1.12 to 0.68 eV under illumination, while light-induced heating and electronic conductivity could be excluded as potential sources for the observed opto-ionic effect. The presented model predicts that photo-generated electrons decrease the potential barrier heights associated with space charge zones depleted in charge carriers between adjacent grains. The discovered opto-ionic effect could pave the way for the development of new electrochemical storage and conversion technologies operating at lower temperatures and/or higher efficiencies and could be further used for fast and contactless control or diagnosis of ionic conduction in polycrystalline solids., (© 2022. The Author(s), under exclusive licence to Springer Nature Limited.)

Practical sensing applications such as real-time safety alerts and clinical diagnoses require sensor devices to differentiate between various target molecules with high sensitivity and selectivity, yet conventional devices such as oxide-based chemo-resistive sensors and metal-based surface-enhanced Raman spectroscopy (SERS) sensors usually do not satisfy such requirements. Here, a label-free, chemo-resistive/SERS multimodal sensor based on a systematically assembled 3D cross-point multifunctional nanoarchitecture (3D-CMA), which has unusually strong enhancements in both "chemo-resistive" and "SERS" sensing characteristics is introduced. 3D-CMA combines several sensing mechanisms and sensing elements via 3D integration of semiconducting SnO 2 nanowire frameworks and dual-functioning Au metallic nanoparticles. It is shown that the multimodal sensor can successfully estimate mixed-gas compositions selectively and quantitatively at the sub-100 ppm level, even for mixtures of gaseous aromatic compounds (nitrobenzene and toluene) with very similar molecular structures. This is enabled by combined chemo-resistive and SERS multimodal sensing providing complementary information., (© 2021 Wiley-VCH GmbH.)

The oxygen deficiency or excess, as reflected in the nonstoichiometry of oxide films, plays a crucial role in their functional properties for applications such as micro solid oxide fuel cells, catalysis, sensors, ferroelectrics, and memristors. High concentrations of oxygen vacancies may be beneficial or detrimental according to the application, and hence there is interest in controlling the oxygen content of films without resorting to compositional changes. Here, we demonstrate that substantial changes in the nonstoichiometry of Pr 0.1 Ce 0.9 O 2-δ (PCO), a model mixed ionic electronic conductor, can be achieved by fabricating multilayers with an inert material, SrTiO 3 (STO). We fabricated heterostructures using pulsed laser deposition, keeping the total thickness of PCO and STO constant while varying the number of layers and thickness of each individual layer, to probe the effects of the PCO/STO interfaces. Conductivity measurements as a function of oxygen partial pressure ( P O 2 ) and temperature showed a significant weakening of the P O 2 dependence compared to bulk PCO, which scaled with the density of interfaces. We confirmed that this change was due to variations in nonstoichiometry, by optical transmission measurements, and show that the lower oxygen content is consistent with a decrease in the effective oxygen reduction enthalpy of PCO. These results exemplify the dramatic differences in properties between films and their bulk counterparts, achievable by interface engineering, and provide generalized insight into tailoring the properties of mixed ionic electronic conductors at the nanoscale.

Effective integration of perovskite films into devices requires knowledge of their electro-chemomechanical properties. Raman spectroscopy is an excellent tool for probing such properties as the films' vibrational characteristics couple to the lattice volumetric changes during chemical expansion. While lattice volumetric changes are typically accessed by analyzing Raman shifts as a function of pressure, stress, or temperature, such methods can be impractical for thin films and do not capture information on chemical expansion. An in situ Raman spectroscopy technique using an electrochemical titration cell to change the oxygen nonstoichiometry of a model perovskite film, Sr(Ti,Fe)O 3- y  , is reported and the lattice vibrational properties are correlated to the material's chemical expansion. How to select an appropriate Raman vibrational mode to track the evolution in oxygen nonstoichiometry is discussed. Subsequently, the frequency of the oxygen stretching mode around Fe 4+ is tracked, as it decreases during reduction as the material expands and increases during reoxidation as the material shrinks. This methodology of oxygen pumping and in situ Raman spectroscopy of oxide films enables future in operando measurements even for small material volumes, as is typical for applications of films as electrodes or electrolytes utilized in electrochemical energy conversion or memory devices., (© 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Hematite (α-Fe 2 O 3 ) is regarded as one of the most promising cost-effective and stable anode materials in photoelectrochemical applications, and its performance, like other transition-metal oxides, depends strongly on its electrical and defect properties. In this work, the electrical and thermomechanical properties of undoped and Sn-doped α-Fe 2 O 3 nanoscale powders were characterized in situ at controlled temperatures ( T = 250 to 400 °C) and atmospheres ( pO 2 = 10 -4 to 1 atm O 2 ) to investigate their transport and defect properties. Frequency-dependent complex impedance spectra show that interfacial resistance between particles is negligible in comparison with particle resistance. Detailed defect models predicting the dependence of electron, hole, and iron and oxygen vacancy concentrations on temperature and oxygen partial pressures for undoped and doped α-Fe 2 O 3 were derived. Using these defect equilibria models, the operative defect regimes were established, and the bandgap energy of undoped α-Fe 2 O 3 and oxidation enthalpy of Sn-doped α-Fe 2 O 3 were obtained from the analysis of the temperature and pO 2 dependence of the electrical conductivity. On the basis of these results, we are able to explain the surprisingly weak impact of donor doping on the electrical conductivity of α-Fe 2 O 3 . Furthermore, experimental means based on the results of this study are given for successfully tuning hematite to enhance its photocatalytic activity for the water oxidation reaction.

Voltage-gated ion transport as a means of manipulating magnetism electrically could enable ultralow-power memory, logic and sensor technologies. Earlier work made use of electric-field-driven O 2- displacement to modulate magnetism in thin films by controlling interfacial or bulk oxidation states. However, elevated temperatures are required and chemical and structural changes lead to irreversibility and device degradation. Here we show reversible and non-destructive toggling of magnetic anisotropy at room temperature using a small gate voltage through H + pumping in all-solid-state heterostructures. We achieve 90° magnetization switching by H + insertion at a Co/GdO x interface, with no degradation in magnetic properties after >2,000 cycles. We then demonstrate reversible anisotropy gating by hydrogen loading in Pd/Co/Pd heterostructures, making metal-metal interfaces susceptible to voltage control. The hydrogen storage metals Pd and Pt are high spin-orbit coupling materials commonly used to generate perpendicular magnetic anisotropy, Dzyaloshinskii-Moriya interaction, and spin-orbit torques in ferromagnet/heavy-metal heterostructures. Thus, our work provides a platform for voltage-controlled spin-orbitronics.

The prospect of significantly enhanced oxide ion diffusion along grain boundaries in Sr-doped LaMnO3 (LSM) was investigated by means of density functional theory calculations applied to a Σ5 (3 1 0)[0 0 1] grain boundary. The structure of the grain boundary was optimized by rigid body translation, and segregation energies were calculated for oxygen vacancies and Sr-acceptors. Two potentially fast diffusion paths were identified along the grain boundary core based on the interconnectivity between neighbouring sites with a strong tendency for segregation of oxygen vacancies. The migration barriers for these paths, obtained with the nudged elastic band method, amounted to about 0.6 eV. Based on the obtained migration barriers and concentrations of oxygen vacancies for the relevant core sites, the grain boundary diffusion coefficient was estimated to be enhanced by 3 to 5 orders of magnitude relative to the bulk in the temperature range 500-900 °C. Space-charge effects were determined to be quite insignificant for the transport properties of LSM grain boundaries.

Thin film nonstoichiometric oxides enable many high-temperature applications including solid oxide fuel cells, actuators, and catalysis. Large concentrations of point defects (particularly, oxygen vacancies) enable fast ionic conductivity or gas exchange kinetics in these materials but also manifest as coupling between lattice volume and chemical composition. This chemical expansion may be either detrimental or useful, especially in thin film devices that may exhibit enhanced performance through strain engineering or decreased operating temperatures. However, thin film nonstoichiometric oxides can differ from bulk counterparts in terms of operando defect concentrations, transport properties, and mechanical properties. Here, we present an in situ investigation of atomic-scale chemical expansion in Pr x Ce 1-x O 2-δ (PCO), a mixed ionic-electronic conducting oxide relevant to electrochemical energy conversion and high-temperature actuation. Through a combination of electron energy loss spectroscopy and transmission electron microscopy with in situ heating, we characterized chemical strains and changes in oxidation state in cross sections of PCO films grown on yttria-stabilized zirconia (YSZ) at temperatures reaching 650 °C. We quantified, both statically and dynamically, the nanoscale chemical expansion induced by changes in PCO redox state as a function of position and direction relative to the film-substrate interface. Additionally, we observed dislocations at the film-substrate interface, as well as reduced cation localization to threading defects within PCO films. These results illustrate several key aspects of atomic-scale structure and mechanical deformation in nonstoichiometric oxide films that clarify distinctions between films and bulk counterparts and that hold several implications for operando chemical expansion or "breathing" of such oxide films.

We compare approaches to measure oxygen surface exchange kinetics, by simultaneous optical transmission relaxation (OTR) and AC-impedance spectroscopy (AC-IS), on the same mixed conducting SrTi 0.65 Fe 0.35 O 3-x film. Surface exchange coefficients were evaluated as a function of oxygen activity in the film, controlled by gas partial pressure and/or DC bias applied across the ionically conducting yttria-stabilized zirconia substrate. Changes in measured light transmission through the film over time (relaxations) resulted from optical absorption changes in the film corresponding to changes in its oxygen and oxidized Fe (~Fe 4+ ) concentrations; such relaxation profiles were successfully described by the equation for surface exchange-limited kinetics appropriate for the film geometry. The k chem values obtained by OTR were significantly lower than the AC-IS derived k chem values and k q values multiplied by the thermodynamic factor (bulk or thin film), suggesting a possible enhancement in k by the metal current collectors (Pt, Au). Long-term degradation in k chem and k q values obtained by AC-IS was also attributed to deterioration of the porous Pt current collector, while no significant degradation was observed in the optically derived k chem values. The results suggest that, while the current collector might influence measurements by AC-IS, the OTR method offers a continuous, in situ , and contact-free method to measure oxygen exchange kinetics at the native surfaces of thin films.

Achieving an improved understanding of catalyst properties, with ability to predict new catalytic materials, is key to overcoming the inherent limitations of metal oxide based gas sensors associated with rather low sensitivity and selectivity, particularly under highly humid conditions. This study introduces newly designed bimetallic nanoparticles (NPs) employing bimetallic Pt-based NPs (PtM, where M = Pd, Rh, and Ni) via a protein encapsulating route supported on mesoporous WO 3 nanofibers. These structures demonstrate unprecedented sensing performance for detecting target biomarkers (even at p.p.b. levels) in highly humid exhaled breath. Sensor arrays are further employed to enable pattern recognition capable of discriminating between simulated biomarkers and controlled breath. The results provide a new class of multicomponent catalytic materials, demonstrating potential for achieving reliable breath analysis sensing., (© 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Actuator operation in increasingly extreme and remote conditions requires materials that reliably sense and actuate at elevated temperatures, and over a range of gas environments. Design of such materials will rely on high-temperature, high-resolution approaches for characterizing material actuation in situ. Here, we demonstrate a novel type of high-temperature, low-voltage electromechanical oxide actuator based on the model material Pr x Ce 1-x O 2-δ (PCO). Chemical strain and interfacial stress resulted from electrochemically pumping oxygen into or out of PCO films, leading to measurable film volume changes due to chemical expansion. At 650 °C, nanometre-scale displacement and strain of >0.1% were achieved with electrical bias values <0.1 V, low compared to piezoelectrically driven actuators, with strain amplified fivefold by stress-induced structural deflection. This operando measurement of films 'breathing' at second-scale temporal resolution also enabled detailed identification of the controlling kinetics of this response, and can be extended to other electrochemomechanically coupled oxide films at extreme temperatures.

In constrained geometries and in varying oxygen partial pressures and operating temperatures, exchange of oxygen ions between non-stoichiometric oxide thin films (for example, doped and undoped ceria systems) and the gas phase can lead to stresses. In this study, these compositional stresses were investigated in thin films of nanocrystalline 10% praseodymium doped ceria (PCO), as a function of average grain size. In situ wafer curvature measurements, along with High Temperature X-Ray Diffraction (HTXRD), were employed to measure stresses and strains, respectively on the PCO films during oxidation-reduction cycling, over the pO 2 range of 10 -1 -10 -5 atm at 750 °C. For relatively large grain sizes, the stress values agree well with the amount of expansion induced by oxygen non-stoichiometry (chemical expansion) predicted by a thin film defect equilibria model that was developed previously. The compositional stresses were found to increase with decreasing grain size. The origin of this effect, including the role of space charge effects near surfaces and interfaces are discussed in this paper. To our knowledge, this is the first time that such comparisons are reported by simultaneously employing high temperature in situ wafer curvature and HTXRD measurements on doped ceria systems.

To meet increasing energy needs, while limiting greenhouse gas emissions over the coming decades, power capacity on a large scale will need to be provided from renewable sources, with solar expected to play a central role. While the focus to date has been on electricity generation via photovoltaic (PV) cells, electricity production currently accounts for only about one-third of total primary energy consumption. As a consequence, solar-to-fuel conversion will need to play an increasingly important role and, thereby, satisfy the need to replace high energy density fossil fuels with cleaner alternatives that remain easy to transport and store. The solar refinery concept (Herron et al. in Energy Environ Sci 8:126-157, 2015), in which captured solar radiation provides energy in the form of heat, electricity or photons, used to convert the basic chemical feedstocks CO 2 and H 2 O into fuels, is reviewed as are the key conversion processes based on (1) combined PV and electrolysis, (2) photoelectrochemically driven electrolysis and (3) thermochemical processes, all focused on initially converting H 2 O and CO 2 to H 2 and CO. Recent advances, as well as remaining challenges, associated with solar-to-fuel conversion are discussed, as is the need for an intensive research and development effort to bring such processes to scale.

Highly textured thin films of undoped, Ce-doped, and Sr-doped Pr 2 CuO 4 were synthesized on single crystal YSZ substrates using pulsed laser deposition to investigate their area-specific resistance (ASR) as cathodes in solid-oxide fuel cells (SOFCs). The effects of T' and T* crystal structures, donor and acceptor doping, and a-axis and c-axis orientation on ASR were systematically studied using electrochemical impedance spectroscopy on half cells. The addition of both Ce and Sr dopants resulted in improvements in ASR in c-axis oriented films, as did the T* crystal structure with the a-axis orientation. Pr 1.6 Sr 0.4 CuO 4 is identified as a potential cathode material with nearly an order of magnitude faster oxygen reduction reaction kinetics at 600 °C compared to thin films of the commonly studied cathode material La 0.6 Sr 0.4 Co 0.8 Fe 0.2 O 3-δ . Orientation control of the cuprate films on YSZ was achieved using seed layers, and the anisotropy in the ASR was found to be less than an order of magnitude. The rare-earth doped cuprate was found to be a versatile system for study of relationships between bulk properties and the oxygen reduction reaction, critical for improving SOFC performance.

Oxygen transport in the mixed ionic-electronic conducting perovskite-oxides SrTi 1-y Fe y O 3-δ (with y = 0.5 and y = 1.0) was studied by oxygen isotope exchange measurements. Experiments were performed on thin-film samples that were grown by Pulsed Laser Deposition (PLD) on MgO substrates. Isotope penetration profiles were introduced by 18 O 2 / 16 O 2 exchanges into the plane of the films at various temperatures in the range 773 < T/K < 973 at an oxygen activity aO 2 = 0.5. Isotope profiles were determined subsequently by Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS), and their analysis yielded tracer diffusion coefficients D* and oxygen surface exchange coefficients k*. Activation energies for oxygen diffusion ΔH D* and surface exchange ΔH k* were obtained. Isothermal values of D* and values of ΔH D* are compared with literature data as a function of Fe content. D* is seen to increase monotonically with Fe content; ΔH D* shows more complex behaviour. D* and ΔH D* are also compared with the predictions of defect-chemical models. Analogous comparisons with literature data for k* and ΔH k* indicate, in contrast to prior studies, no mechanistic difference between electron-poor and electron-rich materials. It is concluded that the single operative mechanism of surface exchange for the entire series of STF compositions requires conduction-band electrons (minority electronic charge-carriers).

We report on the heterogeneous sensitization of metal-organic framework (MOF)-driven metal-embedded metal oxide (M@MO) complex catalysts onto semiconductor metal oxide (SMO) nanofibers (NFs) via electrospinning for markedly enhanced chemical gas sensing. ZIF-8-derived Pd-loaded ZnO nanocubes (Pd@ZnO) were sensitized on both the interior and the exterior of WO 3 NFs, resulting in the formation of multiheterojunction Pd-ZnO and ZnO-WO 3 interfaces. The Pd@ZnO loaded WO 3 NFs were found to exhibit unparalleled toluene sensitivity (R air /R gas = 4.37 to 100 ppb), fast gas response speed (∼20 s) and superior cross-selectivity against other interfering gases. These results demonstrate that MOF-derived M@MO complex catalysts can be functionalized within an electrospun nanofiber scaffold, thereby creating multiheterojunctions, essential for improving catalytic sensor sensitization.

Highly selective detection, rapid response (<20 s), and superior sensitivity (Rair/Rgas> 50) against specific target gases, particularly at the 1 ppm level, still remain considerable challenges in gas sensor applications. We propose a rational design and facile synthesis concept for achieving exceptionally sensitive and selective detection of trace target biomarkers in exhaled human breath using a protein nanocage templating route for sensitizing electrospun nanofibers (NFs). The mesoporous WO3 NFs, functionalized with well-dispersed nanoscale Pt, Pd, and Rh catalytic nanoparticles (NPs), exhibit excellent sensing performance, even at parts per billion level concentrations of gases in a humid atmosphere. Functionalized WO3 NFs with nanoscale catalysts are demonstrated to show great promise for the reliable diagnosis of diseases.

Macroporous WO3 nanotubes (NTs) functionalized with nanoscale catalysts were fabricated using coaxial electrospinning combined with sacrificial templating and protein-encapsulated catalysts. The macroporous thin-walled nanotubular structures were obtained by introducing colloidal polystyrene (PS) particles to a shell solution of W precursor and poly(vinylpyrrolidone). After coaxial electrospinning with a core liquid of mineral oil and subsequent calcination, open pores with an average diameter of 173 nm were formed on the surface of WO3 NTs due to decomposition of the PS colloids. In addition, catalytic Pd nanoparticles (NPs) were synthesized using bio-inspired protein cages, i.e., apoferritin, and uniformly dispersed within the shell solution and subsequently on the WO3 NTs. The resulting Pd functionalized macroporous WO3 NTs were demonstrated to be high performance hydrogen (H2) sensors. In particular, Pd-functionalized macroporous WO3 NTs exhibited a very high H2 response (Rair/Rgas) of 17.6 at 500 ppm with a short response time. Furthermore, the NTs were shown to be highly selective for H2 compared to other gases such as carbon monoxide (CO), ammonia (NH3), and methane (CH4). The results demonstrate a new synthetic method to prepare highly porous nanotubular structures with well-dispersed nanoscale catalysts, which can provide improved microstructures for chemical sensing.

A novel catalyst functionalization method, based on protein-encapsulated metallic nanoparticles (NPs) and their self-assembly on polystyrene (PS) colloid templates, is used to form catalyst-loaded porous WO3 nanofibers (NFs). The metallic NPs, composed of Au, Pd, or Pt, are encapsulated within a protein cage, i.e., apoferritin, to form unagglomerated monodispersed particles with diameters of less than 5 nm. The catalytic NPs maintain their nanoscale size, even following high-temperature heat-treatment during synthesis, which is attributed to the discrete self-assembly of NPs on PS colloid templates. In addition, the PS templates generate open pores on the electrospun WO3 NFs, facilitating gas molecule transport into the sensing layers and promoting active surface reactions. As a result, the Au and Pd NP-loaded porous WO3 NFs show superior sensitivity toward hydrogen sulfide, as evidenced by responses (R(air)/R(gas)) of 11.1 and 43.5 at 350 °C, respectively. These responses represent 1.8- and 7.1-fold improvements compared to that of dense WO3 NFs (R(air)/R(gas) = 6.1). Moreover, Pt NP-loaded porous WO3 NFs exhibit high acetone sensitivity with response of 28.9. These results demonstrate a novel catalyst loading method, in which small NPs are well-dispersed within the pores of WO3 NFs, that is applicable to high sensitivity breath sensors., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

In metal/oxide heterostructures, rich chemical, electronic, magnetic and mechanical properties can emerge from interfacial chemistry and structure. The possibility to dynamically control interface characteristics with an electric field paves the way towards voltage control of these properties in solid-state devices. Here, we show that electrical switching of the interfacial oxidation state allows for voltage control of magnetic properties to an extent never before achieved through conventional magneto-electric coupling mechanisms. We directly observe in situ voltage-driven O(2-) migration in a Co/metal-oxide bilayer, which we use to toggle the interfacial magnetic anisotropy energy by >0.75 erg cm(-2) at just 2 V. We exploit the thermally activated nature of ion migration to markedly increase the switching efficiency and to demonstrate reversible patterning of magnetic properties through local activation of ionic migration. These results suggest a path towards voltage-programmable materials based on solid-state switching of interface oxygen chemistry.

We present a route toward a radical improvement in solar cell efficiency using resonant energy transfer and sensitization of semiconductor metal oxides with a light-harvesting quantum dot (QD)/bacteriorhodopsin (bR) layer designed by protein engineering. The specific aims of our approach are (1) controlled engineering of highly ordered bR/QD complexes; (2) replacement of the liquid electrolyte by a thin layer of gold; (3) highly oriented deposition of bR/QD complexes on a gold layer; and (4) use of the Forster resonance energy transfer coupling between bR and QDs to achieve an efficient absorbing layer for dye-sensitized solar cells. This proposed approach is based on the unique optical characteristics of QDs, on the photovoltaic properties of bR, and on state-of-the-art nanobioengineering technologies. It permits spatial and optical coupling together with control of hybrid material components on the bionanoscale. This method paves the way to the development of the solid-state photovoltaic device with the efficiency increased to practical levels.

Diagnostic sensing device using exhaled breath of human have critical advantages due to the noninvasive diagnosis and high potential for portable device with simple analysis process. Here, we report ultrafast as well as highly sensitive bumpy WO3 hemitube nanostructure assisted by O2 plasma surface modification with functionalization of graphene-based material for the detection of acetone (CH3COCH3) and hydrogen sulfide (H2S) which are biomarkers for the diagnosis of diabetes and halitosis, respectively. 0.1 wt % graphene oxide (GO)- and 0.1 wt % thin layered graphite (GR)- WO3 hemitube composites showed response times of 11.5 ± 2.5 s and 13.5 ± 3.4 s to 1 ppm acetone as well as 12.5 ± 1.9 s and 10.0 ± 1.6 s to 1 ppm of H2S, respectively. In addition, low limits of detection (LOD) of 100 ppb (Rair/Rgas = 1.7 for acetone and Rair/Rgas = 3.3 for H2S at 300 °C) were achieved. The superior sensing properties were ascribed to the electronic sensitization of graphene based materials by modulating space charged layers at the interfaces between n-type WO3 hemitubes and p-type graphene based materials, as identified by Kelvin Probe Force Microscopy (KPFM). Rapid response and superior sensitivity of the proposed sensing materials following cyclic thermal aging demonstrates good potential for real-time exhaled breath diagnosis of diseases.

Field effect transistors (FETs), incorporating metal-oxide nanofibers as the active conductive channel, have the potential for driving the widespread application of nanowire or nanofiber FETs-based electronics. Here we report on low voltage FETs with integrated electrospun In2O3-ZnO-ZnGa2O4 composite fiber channel layers and high-K dielectric (MgO)0.3-(Bi1.5Zn1.0Nb1.5O7)0.7 gate insulator and compare their performance against FETs utilizing conductive single phase, polycrystalline ZnO or In2O3 channel layers. The polycrystalline In2O3-ZnO-ZnGa2O4 composite fibers provide superior performance with high field effect mobility (∼7.04 cm2 V(-1) s(-1)), low subthreshold swing (390 mV/dec), and low threshold voltage (1.0 V) combined with excellent saturation, likely resulting from the effective blocking of high current-flow through the In2O3 and ZnO nanocrystallites by the insulating spinel ZnGa2O4 phase. The microstructural evolution of the individual In2O3, ZnO, and ZnGa2O4 phases in composite fibers is clearly observed by high resolution TEM. A systematic examination of channel area coverage, ranging from single fiber to over 90% coverage, demonstrates that low coverage results in relatively low current outputs and reduced reproducibility which we attribute to the difficulty in positioning fibers and fiber length control. On the other hand, those with ∼80% coverage exhibited high field effect mobility, high on/off current ratios (>10(5)), and negligible hysteresis following 15 sweep voltage cycles. A special feature of this work is the application of the FETs to modulate the properties of complex polycrystalline nanocomposite channels.

The kinetics for Schottky defect (Tl and Br vacancy pair) formation and annihilation in ionically conducting TlBr are characterized through a temperature induced conductivity relaxation technique. Near room temperature, defect generation-annihilation was found to take on the order of hours before equilibrium was reached after a step change in temperature, and that mechanical damage imparted on the sample rapidly increases this rate. The rate limiting step to Schottky defect formation-annihilation is identified as being the migration of lower mobility Tl (versus Br), with an estimate for source-sink density derived from calculated diffusion lengths. This study represents one of the first investigations of Schottky defect generation-annihilation kinetics and demonstrates its utility in quantifying detrimental mechanical damage in radiation detector materials.

An impedimetric NOx dosimeter based on the NOx sorption material KMnO4 is proposed. In addition to its application as a low level NOx dosimeter, KMnO4 shows potential as a precious metal free lean NOx trap material (LNT) for NOx storage catalysts (NSC) enabling electrical in-situ diagnostics. With this dosimeter, low levels of NO and NO2 exposure can be detected electrically as instantaneous values at 380 °C by progressive NOx accumulation in the KMnO4 based sensitive layer. The linear NOx sensing characteristics are recovered periodically by heating to 650 °C or switching to rich atmospheres. Further insight into the NOx sorption-dependent conductivity of the KMnO4-based material is obtained by the novel eTPD method that combines electrical characterization with classical temperature programmed desorption (TPD). The NOx loading amount increases proportionally to the NOx exposure time at sorption temperature. The cumulated NOx exposure, as well as the corresponding NOx loading state, can be detected linearly by electrical means in two modes: (1) time-continuously during the sorption interval including NOx concentration information from the signal derivative or (2) during the short-term thermal NOx release.

Gd-doped CeO(2) exhibits an anomalously large electrostriction effect generating stress that can reach 500 MPa. In situ XANES measurements indicate that the stress develops in response to the rearrangement of cerium-oxygen vacancy pairs. This mechanism is fundamentally different from that of materials currently in use and suggests that Gd-doped ceria is a representative of a new family of high-performance electromechanical materials., (Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

In this work, we demonstrate the mechanism by which electronic charge localization increases the chemical expansion coefficient in two model systems, CeO(2-δ) and BaCeO(3-δ). Using Density Functional Theory calculations, we predict that this coefficient is increased by more than 70% when charge is fully localized, consistent with the observation that materials with a smaller degree of charge localization have smaller chemical expansion coefficients. This finding has important consequences for devising materials with smaller chemical expansion coefficients and for the reliability of the widely-used Shannon's ionic radii.

The role of acceptor dopants (S and Se) in controlling the ionic conductivity of single crystal TlBr, grown by the vertical Bridgman method, was examined as a function of temperature with the aid of impedance spectroscopy. Several features in the conductivity were identified and related to acceptor dopant-Br vacancy association, acceptor dopant exsolution, and Br vacancy mobility. The corresponding enthalpies for these processes were extracted from the data and were found to be equal to H(a) = 0.42 ± 0.07 eV, H(sol) = 1.55 ± 0.18 eV and H(m,Br) = 0.31 ± 0.02 eV respectively, the latter consistent with earlier studies on donor doped and undoped TlBr. A long term conductivity decay in the extrinsic region, attributed to S or Se exsolution, was observed. The time constant associated with exsolution was found to be thermally activated with an activation energy of 0.47 ± 0.1 eV. Estimates for Se solubility at different temperatures are provided.

One of the top design priorities for semiconductor chemical sensors is developing simple, low-cost, sensitive and reliable sensors to be built in handheld devices. However, the need to implement heating elements in sensor devices, and the resulting high power consumption, remains a major obstacle for the realization of miniaturized and integrated chemoresistive thin film sensors based on metal oxides. Here we demonstrate structurally simple but extremely efficient all oxide chemoresistive sensors with ~90% transmittance at visible wavelengths. Highly effective self-activation in anisotropically self-assembled nanocolumnar tungsten oxide thin films on glass substrate with indium-tin oxide electrodes enables ultrahigh response to nitrogen dioxide and volatile organic compounds with detection limits down to parts per trillion levels and power consumption less than 0.2 microwatts. Beyond the sensing performance, high transparency at visible wavelengths creates opportunities for their use in transparent electronic circuitry and optoelectronic devices with avenues for further functional convergence.

In this paper we present the parameterization of a new interionic potential for stoichiometric, reduced and doped CeO(2). We use a dipole polarizable potential (DIPPIM: the dipole polarizable ion model) and optimize its parameters by fitting them to a series of density functional theory calculations. The resulting potential was tested by calculating a series of fundamental properties for CeO(2) and by comparing them against experimental values. The values for all the calculated properties (thermal and chemical expansion coefficients, lattice parameters, oxygen migration energies, local crystalline structure and elastic constants) are within 10-15% of the experimental ones, an accuracy comparable to that of ab initio calculations. This result suggests the use of this new potential for reliably predicting atomic scale properties of CeO(2) in problems where ab initio calculations are not feasible due to their size limitations.

Praseodymium-cerium oxide (PCO) solid solutions exhibit mixed ionic electronic conductivity (MIEC) behavior in a relatively high and readily accessible oxygen partial pressure (P(O(2))) regime and as such serve as a model system for investigating the correlation between thermodynamic and kinetic properties and performance figures of merit in the areas of high temperature energy conversion, automotive control, and gas sensing applications. In this paper, we present measurements on the non-stoichiometry of Pr(0.1)Ce(0.9)O(2-δ) and develop a defect equilibria model to predict the dependence of the concentration of all the dominant charge carriers on temperature, P(O(2)), and Pr fraction. The predictive model is then employed to describe the measured electrical conductivity and oxygen nonstoichiometry whereby pre-exponentials and enthalpies of defect formation and migration are extracted.

An efficient one-step process for forming uniform solid-like layers of ionic liquid (IL) entrapped in colloidal silica network on interdigitated electrodes (IDE) using ultrasonic deposition is described in this communication. The electrical response of such layers deposited on insulating substrates fitted with interdigitated electrodes was measured upon exposure to different gases (H(2), NO(2), CO, and CH(4)) in air demonstrating reversible and sensitive response at 100 degrees C., (Copyright (c) 2009 Elsevier B.V. All rights reserved.)

The desire for ever smarter systems-on-a-chip and plug-free portable electronics with longer operating times between recharge has stimulated growing interest in micro-ionic systems. The use of thin film and photolithographic processing techniques, commonly at temperatures considerably below those utilized in conventional ceramics processing methods, leads to ionic or mixed ionic-electronic materials with nanosized dimensions. The implications for nanosized grains on the conductivity of thin film solid oxide electrolytes are examined. Grain boundary engineering, as a means of controlling and ultimately enhancing transport along and across grain boundaries, becomes essential given that such boundaries often dominate the transport properties of such nano-dimensioned materials. Heterogeneous doping by selective in-diffusion along grain boundaries was introduced as a potentially powerful means of achieving this. This is coupled with the modeling of space charge distributions at such boundaries, taking into account possible dopant segregation to the boundaries. The use of lithographic methods for generating geometrically well defined structures is used to illustrate how one can achieve a much improved understanding of electrode processes in SOFC structures. Indeed, the more idealized structures achievable by application of microelectronic processing provide a marvelous opportunity to uncover the science underlying the technology of micro- and ultimately macro-ionics.

Nanostructured conjugated organic thin films are essential building blocks for highly integrated organic devices. We demonstrate the large-area fabrication of an array of well-ordered 15 nm wide conducting polymer nanowires by using an etch mask consisting of self-assembled patterns of cylinder-forming poly(styrene-b-dimethylsiloxane) diblock copolymer confined in topographic templates. The poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) nanowires operated as an ethanol vapor sensor, suggesting that the electronic properties of the organic film were preserved during the patterning processes. The higher sensitivity to ethanol vapor, compared to an unpatterned film with the same thickness, was attributed to the enhanced surface-to-volume ratio of the nanowire array.

Nanostructured semiconducting metal oxides and particularly single nanowire devices offer exceptional gas sensitivity but at the expense of statistical variations and excessive noise levels. In this study TiO2/poly(vinyl acetate) composite nanofiber mats were directly electrospun onto interdigitated Pt electrode arrays, hot pressed at 120 degrees C, and calcined at 450 degrees C. This resulted in a novel multiple nanowire network composed of sheaths of 200-500 nm diameter cores filled with readily gas accessible approximately 10 nm thick single-crystal anatase fibrils. TiO2 nanofiber sensors tested for NO2, in dry air, exhibited exceptional sensitivity showing with, for example, a 833% increase in sensor resistance when exposed to 500 ppb NO2 at 300 degrees C, consistent with a detection limit estimated to be well below 1 ppb. Unusual response patterns were observed at high NO2 concentrations (> 12.5 ppm), consistent with n to p inversion of the surface-trap limited conduction facilitated by the high surface-to-volume ratio of this material.

Chemical and physical synthesis routes were combined to prepare macroporous CaCu(3)Ti(4)O(12) thin films by pulsed laser deposition onto poly(methyl methacrylate) (PMMA) microsphere templated substrates. These films showed remarkably enhanced gas sensitivity compared with control films deposited on untreated substrates, demonstrating the virtues of combining thin film physical vapor deposition (PVD) techniques in concert with colloidal templates to produce macroporous structures of inorganic films with enhanced surface activity for applications in chemical sensors, catalysts, and fuel cells.

Oxygen and gallium diffusivities in langasite were experimentally determined by analysis of diffusion profiles of 18O and 71Ga tracers by SIMS analysis as functions of temperature and doping. Strontium-enhanced diffusivities and activation energies of approximately 1.2+/-0.2 eV confirm the predominant role of oxygen vacancies in controlling the electrical conductivity of langasite at elevated temperature and oxygen partial pressure. The potential impact of high levels of porosity and the use of an oxygen primary ion beam on the accuracy of some of the data is discussed. The gallium diffusivity, with activation energy of 3.13 eV, was found to be more than two orders of magnitude lower than that of oxygen. Surface exchange measurements enabled estimation of gallium loss at elevated temperatures and oxygen partial pressure; the level is not believed to be of major concern for resonator performance.