Search

Electrode grids are used in neuroscience research and clinical practice to record electrical activity from the surface of the brain. However, existing passive electrocorticography (ECoG) technologies are unable to offer both high spatial resolution and wide cortical coverage, while ensuring a compact acquisition system. The electrode count and density are restricted by the fact that each electrode must be individually wired. This work presents an active micro-electrocorticography (µECoG) implant that tackles this limitation by incorporating metal oxide thin-film transistors (TFTs) into a flexible electrode array, allowing to address multiple electrodes through a single shared readout line. By combining the array with an incremental-ΔΣ readout integrated circuit (ROIC), the system is capable of recording from up to 256 electrodes virtually simultaneously, thanks to the implemented 16:1 time-division multiplexing scheme, offering lower noise levels than existing active µECoG arrays. In vivo validation is demonstrated acutely in mice by recording spontaneous activity and somatosensory evoked potentials over a cortical surface of ≈8×8 mm 2 . The proposed neural interface overcomes the wiring bottleneck limiting ECoG arrays, holding promise as a powerful tool for improved mapping of the cerebral cortex and as an enabling technology for future brain-machine interfaces., (© 2023 The Authors. Advanced Science published by Wiley-VCH GmbH.)

The Internet of Things is driving extensive efforts to develop intelligent everyday objects. This requires seamless integration of relatively simple electronics, for example through 'stick-on' electronics labels. We believe the future evolution of this technology will be governed by Wright's Law, which was first proposed in 1936 and states that the cost of a product decreases with cumulative production. This implies that a generic electronic device that can be tailored for application-specific requirements during downstream integration would be a cornerstone in the development of the Internet of Things. We present an 8-bit thin-film microprocessor with a write-once, read-many (WORM) instruction generator that can be programmed after manufacture via inkjet printing. The processor combines organic p-type and soluble oxide n-type thin-film transistors in a new flavor of the familiar complementary transistor technology with the potential to be manufactured on a very thin polyimide film, enabling low-cost flexible electronics. It operates at 6.5 V and reaches clock frequencies up to 2.1 kHz. An instruction set of 16 code lines, each line providing a 9 bit instruction, is defined by means of inkjet printing of conductive silver inks.

This study sheds light on the microscopic mechanisms by which self-assembled monolayers (SAMs) determine the onset voltage in organic thin-film transistors (OTFTs). Experiments and modeling are combined to investigate the self-assembly and electrostatic interaction processes in prototypical OTFT structures (SiO2/SAM/pentacene), where alkylated and fluoroalkylated silane SAMs are compared. The results highlight the coverage-dependent impact of the SAM on the density of semiconductor states and enable the rationalization and the control of the OTFT characteristics.

A main focus of research on organic semiconductors is their potential application in passive organic radio-frequency identification (RF-ID) tags. First prototypes working at 125 kHz have been shown by industrial research groups. However, to be commercially viable, the organic RF-ID tag would need to be compatible with the base-carrier frequency of 13.56 MHz (ref. 2). High-frequency operation has been out of reach for devices based on organic semiconducting material, because of the intrinsically low mobility of those materials. Here, we report on a rectifier based on a pentacene diode that can rectify an incoming a.c. signal at 50 MHz. At 14 MHz, a rectified voltage of 11 V for an a.c. voltage with a peak-to-peak amplitude of 36 V has been achieved. On the basis of those results, we estimate the frequency limits of an organic diode showing that even the ultra-high-frequency band at around 800 MHz is within reach.