Search

Engineering perovskite precursor ink to widen the processing window is crucial to obtaining uniform, compact, and pinhole-free perovskite films at scale using industrially relevant solution coating techniques. Here, we introduce a ternary solvent system and systematically investigate the impacts of coordinating solvents, N -methyl-2-pyrrolidone (NMP) and N , N '-dimethylpropyleneurea (DMPU), on the physical properties of the slot-die-coated perovskite films and on the corresponding device performance. Tailoring NMP and DMPU concentrations in the precursor ink allows us to control the perovskite intermediate phase formation and widen the processing window, enabling the reproducible production of perovskite films with high photoelectrical quality at scale. Using the optimized precursor ink, we demonstrate slot-die-coated perovskite minimodules with power conversion efficiencies of 19 and 16% on 56 and 100 cm 2 substrates, respectively.

Surface defects in semiconducting materials, though they have been widely studied, remain a prominent source of loss in optoelectronic devices; here we sought a new angle of approach, looking into the dynamic roles played by surface defects under atmospheric stressors and their chemical passivants in the lifetime of optoelectronic materials. We find that surface defects possess properties distinct from those of bulk defects. ab initio molecular dynamics simulations reveal a previously overlooked reversible degradation mechanism mediated by hydrogen vacancies. We find that dynamic surface adsorption affinity (DAA) relative to surface treatment ligands is a surrogate for passivation efficacy, a more strongly-correlated feature than is the static binding strength emphasized in prior reports. This guides us to design targeted passivator ligands with high molecular polarity: for example, 4-aminobutylphosphonic acid exhibits strong DAA and provides defect passivation applicable to a range of perovskite compositions, including suppressed hydrogen vacancy formation, enhanced photovoltaic performances and operational stability in perovskite solar cells., (© 2024. The Author(s).)

Frequency domain characterization has long served as an important method for the examination of diverse kinetic processes that occur in solar cells. In this study, we investigated the dynamic response of high-efficiency perovskite solar cells utilizing ultra-low-intensity-modulated photocurrent spectroscopy. Distinctive intensity-modulated photocurrent spectroscopy (IMPS) attributes were detected only as a result of this low-intensity modulation, and their evolution under light and voltage bias was investigated in detail. We generally observed only two arcs in the Q -plane plots and attributed the smaller, low-frequency arc to trap-dominated charge transport in the device. Light and voltage bias-dependent measurements confirm this attribution. An equivalent circuit model was used to better understand the features and trends of these measurements and to validate our physical interpretation of the results. Additionally, we tracked the IMPS response of one of the cells over time and showed that slow degradation impacts the size and attributes of the low-frequency arc. Finally, we found that changes in the IMPS response correlate closely with the current versus voltage characteristics of the devices.

Tin (Sn)-containing perovskite solar cells (PSCs) have gained significant attention in the field of perovskite optoelectronics due to lower toxicity than their lead-based counterparts and their potential for tandem applications. However, the lack of stability is a major concern that hampers their development. To achieve the long-term stability of Sn-containing PSCs, it is crucial to have a clear and comprehensive understanding of the degradation mechanisms of Sn-containing perovskites and develop mitigation strategies. This review provides a compendious overview of degradation pathways observed in Sn-containing perovskites, attributing to intrinsic factors related to the materials themselves and environmental factors such as light, heat, moisture, oxygen, and their combined effects. The impact of interface and electrode materials on the stability of Sn-containing PSCs is also discussed. Additionally, various strategies to mitigate the instability issue of Sn-containing PSCs are summarized. Lastly, the challenges and prospects for achieving durable Sn-containing PSCs are presented., (© 2023 The Authors. Advanced Science published by Wiley-VCH GmbH.)

Propane catalytic oxidation is an important industrial chemical process. However, poor activity is frequently observed for stable C-H bonds, especially for non-noble catalysts in low temperature. Herein, we reported a controlled synthesis of catalyst Co 3 O 4 @CeO 2 -IE via inverse loading and proposed a strategy of oxygen vacancy for its high catalytic oxidation activity, achieving better performance than traditional supported catalyst Co 3 O 4 /CeO 2 -IM, i.e., the T 50 (temperature at 50% propane conversion) of 217 °C vs. 235 °C and T 90 (temperature at 90% propane conversion) of 268 °C vs. 348 °C at the propane space velocity of 60,000 mL g -1 h -1 . Further investigations indicate that there are more enriched oxygen vacancies in Co 3 O 4 @CeO 2 -IE due to the unique preparation method. This work provides an element doping strategy to effectively boost the propane catalytic oxidation performance as well as a bright outlook for efficient environmental catalysts.

The tunable bandgaps and facile fabrication of perovskites make them attractive for multi-junction photovoltaics 1,2 . However, light-induced phase segregation limits their efficiency and stability 3-5 : this occurs in wide-bandgap (>1.65 electron volts) iodide/bromide mixed perovskite absorbers, and becomes even more acute in the top cells of triple-junction solar photovoltaics that require a fully 2.0-electron-volt bandgap absorber 2,6 . Here we report that lattice distortion in iodide/bromide mixed perovskites is correlated with the suppression of phase segregation, generating an increased ion-migration energy barrier arising from the decreased average interatomic distance between the A-site cation and iodide. Using an approximately 2.0-electron-volt rubidium/caesium mixed-cation inorganic perovskite with large lattice distortion in the top subcell, we fabricated all-perovskite triple-junction solar cells and achieved an efficiency of 24.3 per cent (23.3 per cent certified quasi-steady-state efficiency) with an open-circuit voltage of 3.21 volts. This is, to our knowledge, the first reported certified efficiency for perovskite-based triple-junction solar cells. The triple-junction devices retain 80 per cent of their initial efficiency following 420 hours of operation at the maximum power point., (© 2023. The Author(s), under exclusive licence to Springer Nature Limited.)

Light-induced performance changes in metal halide perovskite solar cells (PSCs) have been studied intensively over the last decade, but little is known about the variation in microscopic optoelectronic properties of the perovskite heterojunctions in a completed device during operation. Here, we combine Kelvin probe force microscopy and transient reflection spectroscopy techniques to spatially resolve the evolution of junction properties during the operation of metal-halide PSCs and study the light-soaking effect. Our analysis showed a rise of an electric field at the hole-transport layer side, convoluted with a more reduced interfacial recombination rate at the electron-transport layer side in the PSCs with an n-i-p structure. The junction evolution is attributed to the effects of ion migration and self-poling by built-in voltage. Device performances are correlated with the changes of electrostatic potential distribution and interfacial carrier dynamics. Our results demonstrate a new route for studying the complex operation mechanism in PSCs.

The structural and optical properties of hybrid organic-inorganic metal halide perovskite solar cells are measured by spectroscopic ellipsometry to reveal an optically distinct interfacial layer among the back contact metal, charge transport, and absorber layers. Understanding how this interfacial layer impacts performance is essential for developing higher performing solar cells. This interfacial layer is modeled by Bruggeman effective medium approximations (EMAs) to contain perovskite, C 60 , BCP, and metal. External quantum efficiency (EQE) simulations that consider scattering, electronic losses, and the formation of nonparallel interfaces are created with input derived from ellipsometry structural-optical models and compared with experimental EQE to estimate optical losses. This nonplanar interface causes optical losses in short circuit current density ( J SC ) of up to 1.2 mA cm -2 . A study of glass/C 60 /SnO 2 /Ag or Cu and glass/C 60 /BCP/Ag film stacks shows that C 60 and BCP mix, but replacing BCP with SnO 2 can prevent mixing between the ETLs to prevent contact between C 60 and back contact metal and enable the formation of a planar interface between ETLs and back contact metals.

Lewis base molecules that bind undercoordinated lead atoms at interfaces and grain boundaries (GBs) are known to enhance the durability of metal halide perovskite solar cells (PSCs). Using density functional theory calculations, we found that phosphine-containing molecules have the strongest binding energy among members of a library of Lewis base molecules studied herein. Experimentally, we found that the best inverted PSC treated with 1,3-bis(diphenylphosphino)propane (DPPP), a diphosphine Lewis base that passivates, binds, and bridges interfaces and GBs, retained a power conversion efficiency (PCE) slightly higher than its initial PCE of ~23% after continuous operation under simulated AM1.5 illumination at the maximum power point and at ~40°C for >3500 hours. DPPP-treated devices showed a similar increase in PCE after being kept under open-circuit conditions at 85°C for >1500 hours.

The Urbach energy indicating the width of the exponentially decaying sub-bandgap absorption tail is commonly used as the indicator of electronic quality of thin-film materials used as absorbers in solar cells. Urbach energies of hybrid inorganic-organic metal halide perovskites with various anion-cation compositions are measured by photothermal deflection spectroscopy. The variation in anion-cation composition has a substantial effect on the measured Urbach energy and hence the electronic quality of the perovskite. Depending upon the compositions, the Urbach energy varies from 18 to 65 meV for perovskite films with similar bandgap energies. For most of the perovskite compositions studied here including methylammonium (MA) + formamidinium (FA)-based Pb iodides, mixed Sn + Pb narrow-bandgap perovskites with low or intermediate Sn contents, and wide-bandgap FA + Cs- and I + Br-based perovskites, the correlation between the Urbach energy of the perovskite thin film and open-circuit voltage ( V OC ) deficit for corresponding solar cells shows a direct relationship with reduction of the Urbach energy occurring with a beneficial decrease in the V OC deficit. However, due to issues related to material quality, impurity phases and stability in laboratory ambient air, and unoptimized film processing techniques, the solar cells incorporating Cs-based inorganic and mixed Sn + Pb perovskites with a higher than optimum Sn content show a higher V OC deficit even though the corresponding films show a lower Urbach energy.

Bifacial solar cells hold the potential to achieve a higher power output per unit area than conventional monofacial devices without significantly increasing manufacturing costs. However, efficient bifacial designs are challenging to implement in inorganic thin-film solar cells because of their short carrier lifetimes and high rear surface recombination. The emergence of perovskite photovoltaic (PV) technology creates a golden opportunity to realize efficient bifacial thin-film solar cells, owing to their outstanding optoelectronic properties and unique features of device physics. More importantly, transparent conducting oxide electrodes can prevent electrode corrosion by halide ions, mitigating one major instability issue of the perovskite devices. Here, the theory of bifacial PV devices is summarized and the advantages of bifacial perovskite solar cells, such as high power output, enhanced device durability, and low economic and environmental costs, are reviewed. The limitations and challenges for bifacial perovskite solar cells are also discussed. Finally, the awareness of bifacial solar cells as a feasible commercialization pathway of perovskite PV for mainstream solar power generation and building-integrated PV is advocated and future research directions are suggested., (© 2021 Wiley-VCH GmbH.)

Copper (Cu) incorporation is a key process for fabricating efficient CdTe-based thin-film solar cells and has been used in CdTe-based solar cell module manufacturing. Here, we investigate the effects of different Cu precursors on the performance of CdTe-based thin-film solar cells by incorporating Cu using a metallic Cu source (evaporated Cu) and ionic Cu sources (solution-processed cuprous chloride (CuCl) and copper chloride (CuCl 2 )). We find that ionic Cu precursors offer much better control in Cu diffusion than the metallic Cu precursor, producing better front junction quality, lower back-barrier heights, and better bulk defect property. Finally, outperforming power conversion efficiencies of 17.2 and 17.5% are obtained for devices with cadmium sulfide and zinc magnesium oxide as the front window layers, respectively, which are among the highest reported CdTe solar cells efficiencies. Our results suggest that an ionic Cu precursor is preferred as the dopant to fabricate efficient CdTe thin-film solar cells and modules.

In situ real-time spectroscopic ellipsometry (RTSE) measurements have been conducted on MAPbI 3 , MA 0.7 FA 0.3 PbI 3 , and (FAPbI 3 ) 0.95 (MAPbBr 3 ) 0.05 perovskite thin films when exposed to different levels of relative humidity at given temperatures over time. Analysis of RTSE measurements track changes in the complex dielectric function spectra and structure, which indicate variations in stability influenced by the underlying material, preparation method, and perovskite composition. MAPbI 3 and MA 0.7 FA 0.3 PbI 3 films deposited on commercial fluorine-doped tin oxide coated glass are more stable than corresponding films deposited on soda lime glass directly. (FAPbI 3 ) 0.95 (MAPbBr 3 ) 0.05 films on soda lime glass showed improved stability over the other compositions regardless of the substrate, and this is attributed to the preparation method as well as the final composition.

Hierarchical TS-1 has attracted enormous attention from both academia and industry due to its remarkable catalytic performance in epoxidation reactions. However, sustainable synthesis of hierarchical-nanosized TS-1 without mesoporogens is still challenging. In this work, we report a facile and mesoporogen-free strategy to simultaneously manipulate pore structure and particle size of TS-1 employing the concentrated system. Taking advantage of the suspended nuclei in the concentrated system as confirmed by the DLS-PSD and atomic force microscopy, the novel TS-1 is demonstrated to have higher Ti concentration on surface, higher surface area (539 m 2 /g), abundant mesopores, and reduced crystal size (ca. 150 nm). Moreover, this Au-Ti bifunctional catalyst shows a good PO formation rate with enhanced catalytic stability due to the hierarchical structure. This strategy opens a novel way for the green synthesis of hierarchical-nanosized TS-1 and facilitates industrial development of the Au/TS-1 catalyst for propene epoxidation.

Long-lived photon-stimulated conductance changes in solid-state materials can enable optical memory and brain-inspired neuromorphic information processing. It remains challenging to realize optical switching with low-energy consumption, and new mechanisms and design principles giving rise to persistent photoconductivity (PPC) can help overcome an important technological hurdle. Here, we demonstrate versatile heterojunctions between metal-halide perovskite nanocrystals and semiconducting single-walled carbon nanotubes that enable room-temperature, long-lived (thousands of seconds), writable, and erasable PPC. Optical switching and basic neuromorphic functions can be stimulated at low operating voltages with femto- to pico-joule energies per spiking event, and detailed analysis demonstrates that PPC in this nanoscale interface arises from field-assisted control of ion migration within the nanocrystal array. Contactless optical measurements also suggest these systems as potential candidates for photonic synapses that are stimulated and read in the optical domain. The tunability of PPC shown here holds promise for neuromorphic computing and other technologies that use optical memory., (Copyright © 2021 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works. Distributed under a Creative Commons Attribution NonCommercial License 4.0 (CC BY-NC).)

Green and efficient synthesis of titanium-containing molecular sieves is limited by the quantity of environmentally unfriendly additives and complicated synthesis procedures required. Oligomerization of Ti monomers into anatase TiO 2 is the typical outcome of such procedures because of a mismatch between hydrolysis rates of Si and Ti precursors. We report a simple and generic additive-free route for the synthesis of Ti-containing molecular sieves (MFI, MEL, and BEA). This approach successfully reverses the formation of Ti oligomers to match hydrolysis rates of Ti and Si species with the assistance of hydroxyl free radicals generated in situ from ultraviolet irradiation. Moreover, fantastic catalytic performance for propene epoxidation with H 2 and O 2 was observed. Compared with the conventional hydrothermal method, this approach opens up new opportunities for high-efficiency, environmentally benign, and facile production of pure titanium-containing molecular sieves., (© 2020 Wiley-VCH GmbH.)

Perovskite solar cell device performance is affected by optical and electronic losses. To minimize these losses in solar cells, it is important to identify their sources. Here, we report the optical and electronic losses arising from physically mixed interfacial layers between the adjacent component materials in highly efficient two terminal (2T) all-perovskite tandem, single-junction wide-bandgap, and single-junction narrow-bandgap perovskite-based solar cells. Physically mixed interfacial layers as the sources of optical and electronic losses are identified from spectroscopic ellipsometry measurements and data analysis followed by comparisons of simulated and measured external quantum efficiency spectra. Parasitic absorbance in the physically mixed regions between silver metal electrical contacts and electron transport layers (ETLs) near the back contact and a physical mixture of commercial indium tin oxide and hole transport layers (HTL) near the front electrical contact lead to substantial optical loss. A lower-density void + perovskite nucleation layer formed during perovskite deposition at the interface between the perovskite absorber layer and the HTL causes electronic losses because of incomplete collection of photogenerated carriers likely originating from poor coverage and passivation of the initially nucleating grains.

The advent of the two-dimensional (2D) family of halide perovskites and their demonstration in 2D/three-dimensional (3D) hierarchical film structures broke new ground toward high device performance and good stability. The 2D Dion-Jacobson (DJ) phase halide perovskites are especially attractive in solar cells because of their superior charge transport properties. Here, we report on 2D DJ phase perovskites using a 3-(aminomethyl)piperidinium (3AMP) organic spacer for the fabrication of mixed Pb/Sn-based perovskites, exhibiting a narrow bandgap of 1.27 eV and a long carrier lifetime of 657.7 ns. Consequently, solar cells employing mixed 2D DJ 3AMP-based and 3D MA 0.5 FA 0.5 Pb 0.5 Sn 0.5 I 3 (MA = methylammonium, FA = formamidinium) perovskite composites as light absorbers achieve enhanced efficiency and stability, giving a power conversion efficiency of 20.09% with a high open-circuit voltage of 0.88 V, a fill factor of 79.74%, and a short-circuit current density of 28.63 mA cm -2 . The results provide an effective strategy to improve the performance of single-junction narrow-bandgap solar cells and, potentially, to give a highly efficient alternative to bottom solar cells in tandem devices.

The replacement of traditional CdS with zinc magnesium oxide (ZMO) has been demonstrated as being helpful to boost power conversion efficiency of cadmium telluride (CdTe) solar cells to over 18%, due to the reduced interface recombination and parasitic light absorption by the buffer layer. However, due to the atmosphere sensitivity of ZMO film, the post treatments of ZMO/CdTe stacks, including CdCl 2 treatment, back contact deposition, etc., which are critical for high-performance CdTe solar cells became crucial challenges. To realize the full potential of the ZMO buffer layer, plenty of investigations need to be accomplished. Here, copper thiocyanate (CuSCN) is demonstrated to be a suitable back-contact material with multi-advantages for ZMO/CdTe solar cells. Particularly, ammonium hydroxide as the solvent for CuSCN deposition shows no detrimental impact on the ZMO layer during the post heat treatment. The post annealing temperature as well as the thickness of CuSCN films are investigated. Finally, a champion power conversion efficiency of 16.7% is achieved with an open-circuit voltage of 0.857 V, a short-circuit current density of 26.2 mA/cm 2 , and a fill factor of 74.0%.

The two-step solution-based process has demonstrated substantial success in fabricating high-efficiency perovskite solar cells in recent years. Despite the high performance, the underlying mechanisms that govern the formation of perovskite films and corresponding device performance are yet to be fully understood. Particularly, organic cation composition used in the two-step solution processing of mixed-cation lead halide perovskite solar cells plays a critical role in the perovskite film formation and the resultant device performance. However, little is understood about the impacts of organic cation composition on the current density-voltage ( J - V ) hysteretic behavior and stability of perovskite solar cells. To address this need, here, we study the effect of mixed organic cations, that is, the fraction of formamidinium (FA) and methylammonium (MA) contents, used for the two-step solution-processed perovskite thin films on solar cell performance, including efficiency, J - V hysteresis, and stability. In addition to the efficiency variations, we find that perovskite solar cells based on FA-rich and MA-rich stoichiometries show distinct characteristics in J - V hysteresis and stability. The origins of such a discrepancy are attributed to the thermodynamically driven conversion from lead iodide to perovskites, which is determined by the combination of organic cations. The perovskite solar cells based on the mixed cation FA 0.6 MA 0.4 PbI 3 composition show a champion power conversion efficiency of over 21% and robust stability (retaining more than 90% of initial efficiency) under maximum power-point tracking in dry nitrogen for more than 500 h. Our work provides insights on understanding the formation of perovskite films in the two-step process, which may benefit further investigation on perovskite solar cells.

Narrow bandgap mixed tin (Sn) + lead (Pb) perovskites are necessary for the bottom sub-cell absorber in high efficiency all-perovskite polycrystalline tandem solar cells. We report on the impact of mixed cation composition and atmospheric exposure of perovskite films on sub-gap absorption in films and performance of solar cells based on narrow bandgap mixed formamidinium (FA) + methylammonium (MA) and Sn + Pb halide perovskites, (FASnI 3 ) x (MAPbI 3 ) 1-x . Structural and optical properties of 0.3 ≤ x ≤ 0.8 (FASnI 3 ) x (MAPbI 3 ) 1-x perovskite thin film absorbers with bandgaps ranging from 1.25 eV (x = 0.6) to 1.34 eV (x = 0.3) are probed with and without atmospheric exposure. Urbach energy, which quantifies the amount of sub-gap absorption, is tracked for pristine perovskite films as a function of composition, with x = 0.6 and 0.3 demonstrating the lowest and highest Urbach energies of 23 meV and 36 meV, respectively. Films with x = 0.5 and 0.6 compositions show less degradation upon atmospheric exposure than higher or lower Sn-content films having greater sub-gap absorption. The corresponding solar cells based on the x = 0.6 absorber show the highest device performance. Despite having a low Urbach energy, higher Sn-content solar cells show reduced device performances as the amount of degradation via oxidation is the most substantial.

Temperature-dependent photoluminescence (PL) spectroscopy measurements have been performed over a range from 9 K to room temperature on polycrystalline methylammonium (MA)/formamidinium (FA) lead iodide (MA 1- x FA x PbI 3 ) perovskite thin films. Our low-temperature PL analysis reveals the existence of charge compensating defects in MAPbI 3 , which may explain the lower net free carrier concentration in MAPbI 3 perovskite. More interestingly, we observe the suppression of the PL emission associated with the charged defects by appropriate FA inclusion. Furthermore, FA incorporation into MAPbI 3 has been found to slow the phase transformation of MA 1- x FA x PbI 3 from orthorhombic to tetragonal phase, which occurs with increasing temperature. Our analyses of the FA concentration's impact on defect density and structural phase transformation provide beneficial insights that improve the understanding of the photovoltaic properties and application of organic-inorganic metal halide perovskites.

Despite the exciting progress on power conversion efficiencies, the commercialization of the emerging lead (Pb) halide perovskite solar cell technology still faces significant challenges, one of which is the inclusion of toxic Pb. Searching for Pb-free perovskite solar cell absorbers is currently an attractive research direction. The approaches used for and the consequences of Pb replacement are reviewed herein. Reviews on the theoretical understanding of the electronic, optical, and defect properties of Pb and Pb-free halide perovskites and perovskite derivatives are provided, as well as the experimental results available in the literature. The theoretical understanding explains well why Pb halide perovskites exhibit superior photovoltaic properties, but Pb-free perovskites and perovskite derivatives do not., (© 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Organic p-type semiconductors with tunable structures offer great opportunities for hybrid perovskite solar cells (PVSCs). We report herein two dithieno[3,2-b:2',3'-d]pyrrole (DTP) cored molecular semiconductors prepared through π-conjugation extension and an N-alkylation strategy. The as-prepared conjugated molecules exhibit a highest occupied molecular orbital (HOMO) level of -4.82 eV and a hole mobility up to 2.16×10 -4  cm 2  V -1  s -1 . Together with excellent film-forming and over 99 % photoluminescence quenching efficiency on perovskite, the DTP based semiconductors work efficiently as hole-transporting materials (HTMs) for n-i-p structured PVSCs. Their dopant-free MA 0.7 FA 0.3 PbI 2.85 Br 0.15 devices exhibit a power conversion efficiency over 20 %, representing one of the highest values for un-doped molecular HTMs based PVSCs. This work demonstrates the great potential of using a DTP core in designing efficient semiconductors for dopant-free PVSCs., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Recently, halide perovskites have upstaged decades of solar cell development by reaching power conversion efficiencies that surpass the performance of polycrystalline silicon. The efficiency improvement in the perovskite cells is related to repeated recycling between photons and electron-hole pairs, reduced recombination losses, and increased carrier lifetimes. Here, we demonstrate a novel approach toward augmenting the perovskite solar cell efficiency by invoking the Förster Resonance Energy Transfer (FRET) mechanism. FRET occurs in the near-field region as the bacteriorhodopsin (bR) protein, and perovskite has similar optical gaps. Titanium dioxide functionalized with the bR protein is shown to accelerate the electron injection from excitons produced in the perovskite layer. FRET predicts the strength of long-range excitonic transport between the perovskite and bR layers. Solar cells incorporating TiO 2 /bR layers are found to exhibit much higher photovoltaic performance as compared to baseline cells without bR. These results open the opportunity to develop a new class of bioperovskite solar cells with improved performance and stability.

All-inorganic metal halide perovskites have attracted great interest in recent years due to their good device performance with higher thermal stability than that of their organic-inorganic perovskite counterparts. However, the all-inorganic perovskite polycrystalline films prepared by the conventional spin-coating method possess many pinholes, nonuniform surface with many small crystals, and irregular agglomerates, limiting their device performance. Herein, we introduced a monolayer nano-polystyrene (PS) sphere confined growth method for obtaining CsPbBr3 nanonet films (NFs) with ordered nanostructures grown in the preferred (110) orientation, which is beneficial for the charge carrier transport and the light-harvesting efficiency. The (110) peak intensity of CsPbBr3 NFs increased with the increase of the diameter of the monolayer sphere, while the (001) peak intensity was suppressed greatly, indicating the more preferred (110) oriented growth. The PDs based on (110)-orientation-preferred CsPbBr3 NFs prepared by using 850 nm PS spheres showed the best performance. The best performing device displayed the biggest linear dynamic range of up to 120 dB. In addition, a responsivity of 2.84 A W-1 and a detectivity of 5.47 × 1012 Jones were also achieved.

All-perovskite-based polycrystalline thin-film tandem solar cells have the potential to deliver efficiencies of >30%. However, the performance of all-perovskite-based tandem devices has been limited by the lack of high-efficiency, low-band gap tin-lead (Sn-Pb) mixed-perovskite solar cells (PSCs). We found that the addition of guanidinium thiocyanate (GuaSCN) resulted in marked improvements in the structural and optoelectronic properties of Sn-Pb mixed, low-band gap (~1.25 electron volt) perovskite films. The films have defect densities that are lower by a factor of 10, leading to carrier lifetimes of greater than 1 microsecond and diffusion lengths of 2.5 micrometers. These improved properties enable our demonstration of >20% efficient low-band gap PSCs. When combined with wider-band gap PSCs, we achieve 25% efficient four-terminal and 23.1% efficient two-terminal all-perovskite-based polycrystalline thin-film tandem solar cells., (Copyright © 2019 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works.)

Up to now, multijunction cell design is the only successful way demonstrated to overcome the Shockley-Quiesser limit for single solar cells. Perovskite materials have been attracting ever-increasing attention owing to their large absorption coefficient, tunable bandgap, low cost, and easy fabrication process. With their rapidly increased power conversion efficiency, organic-inorganic metal halide perovskite-based solar cells have demonstrated themselves as the most promising candidates for next-generation photovoltaic applications. In fact, it is a dream come true for researchers to finally find a perfect top-cell candidate in tandem device design in commercially developed solar cells like single-crystalline silicon and CIGS cells used as the bottom component cells. Here, the recent progress of multijunction solar cells is reviewed, including perovskite/silicon, perovskite/CIGS, perovskite/perovskite, and perovskite/polymer multijunction cells. In addition, some perspectives on using these solar cells in emerging markets such as in portable devices, Internet of Things, etc., as well as an outlook for perovskite-based multijunction solar cells are discussed., Competing Interests: The authors declare no conflict of interest.

Organic-inorganic metal halide perovskites are notoriously unstable in humid environments. While many studies have revealed the morphology and crystal structure changes that accompany exposure to humidity, little is known about changes to the photophysics that accompany the degradation process. By combining in situ steady-state and time-resolved photoluminescence with Hall effect measurements, we examined the changes in the photoexcited carrier dynamics for methylammonium lead iodide (MAPbI 3 ) and bromide (MAPbBr 3 ) films exposed to nitrogen gas containing water vapor at 80% relative humidity. The changes in the photophysics of MAPbI 3 interacting with water follow a four-stage process, consisting of surface passivation, free electron doping, interfacial hydration, and bulk hydration. In contrast, MAPbBr 3 exhibits only features associated with the first two stages, which occur at a faster rate. Our results elucidate the degradation mechanisms of perovskite films in high humidity from the perspective of the photophysics, providing insights for how humidity affects the stability of the perovskite materials.

Owing to their low trap-state density, high carrier mobility, and high thermal stability, CsPbBr 3 perovskite microcrystals (MCs) have attracted significant attention for applications as photodetectors (PDs). However, solution synthesis processes lead to MC films with high void density, seriously limiting the performance of the PDs. Here, a pressure-assisted annealing strategy is introduced to significantly reduce the void density and decrease the surface roughness. The resulting self-powered all-inorganic CsPbBr 3 perovskite MC thick-film PDs show improved performance characteristics, with responsivities and detectivities of up to 0.206 A W -1 and 7.23 × 10 12 Jones, respectively. Moreover, the on/off ratios of the devices are up to 10 6 , and the highest linear dynamic range reaches 123.5 dB. These improved results indicate that the pressure-assisted annealing method is an effective strategy to enhance the performance of solution-synthesized perovskite MC PDs.

Herein, we report a facile process, i.e., controlling the initial chamber pressure during the postdeposition annealing, to effectively lower the band tail states in the synthesized CZTSSe thin films. Through detailed analysis of the external quantum efficiency derivative ( dEQE/ dλ) and low-temperature photoluminescence (LTPL) data, we find that the band tail states are significantly influenced by the initial annealing pressure. After carefully optimizing the deposition processes and device design, we are able to synthesize kesterite CZTSSe thin films with energy differences between inflection of d(EQE)/dλ and LTPL as small as 10 meV. These kesterite CZTSSe thin films enable the fabrication of solar cells with a champion efficiency of 11.8% with a low V oc deficit of 582 mV. The results suggest that controlling the annealing process is an effective approach to reduce the band tail in kesterite CZTSSe thin films.

Organic-inorganic lead halide perovskite microcrystal (MC) films are attractive candidates for fabricating high-performance large-area self-powered photodetectors (PDs) because of their lower trap state density and higher carrier mobility than their polycrystalline counterparts and more suitability of synthesizing large lateral area films than their single-crystal counterparts. Here, we report on the fabrication of self-powered all-inorganic CsPbBr 3 perovskite MC PDs with high detectivity, using a modified solution synthesis method. The MCs are up to about 10 μm in size, and the MC layer is also about 11 μm in thickness. Under 473 nm laser (100 mW) illumination, the CsPbBr 3 MC PDs show responsivity values of up to 0.172 A W -1 , detectivity values of up to 4.8 × 10 12 Jones, on/off ratios of up to 1.3 × 10 5 , and linear dynamic ranges of up to 113 dB. These performances are significantly better than those of PDs based on polycrystalline perovskite thin films and comparable with those of PDs based on perovskite single crystals.

Fatty nitriles are widely used as intermediate molecules in the pharmaceutical and polymer industries. In addition, hydrogenation of fatty nitriles produces fatty amines that are common surfactants. In the conventional fatty nitrile process, triglycerides are first hydrolyzed and the resulting fatty acids are catalytically reacted with NH 3 in a liquid-phase reaction. In this study, we report a simpler one-step fatty nitrile production method that involves a direct vapor-phase reaction of triglycerides with NH 3 in the presence of heterogeneous solid acid catalysts. The reactions were performed in a tubular reactor maintained at 400 °C into which triglycerides were injected through an atomizer to allow rapid volatilization and reaction; NH 3 was fed as a gas. Several metal oxide catalysts were tested, and reactions in the presence of V 2 O 5 resulted in near-theoretical fatty nitrile yields (84 wt % relative to the feed mass). In general, catalysts with higher acidity such as V 2 O 5 , Fe 2 O 3 , and ZnO showed higher fatty nitrile yields compared to low acidity catalysts such as ZrO, Al 2 O 3 , and CuO. Energy balance calculations indicate that the one-step reaction described here would require significantly lower energy than the conventional process primarily because of the elimination of the energy-intense triglyceride hydrolysis., Competing Interests: The authors declare no competing financial interest.

Control over grain size and crystallinity is important for preparation of methylammonium lead iodide (MAPbI 3 ) solar cells. We explore the effects of using small concentrations of Cd 2+ and unusually high concentrations of methylammonium iodide during the growth of MAPbI 3 in the two-step solution process. In addition to improved crystallinity and an enhancement in the size of the grains, time-resolved photoluminescence measurements indicated a dramatic increase in the carrier lifetime. As a result, devices constructed with the Cd-modified perovskites showed nearly a factor of 2 improvement in the power conversion efficiency (PCE) relative to similar devices prepared without Cd addition. The grains also showed a higher degree of orientation in the ⟨110⟩ direction, indicating a change in the growth mechanism, and the films were compact and smooth. We propose a Cd-modified film growth mechanism that invokes a critical role for low-dimensional Cd perovskites to explain the experimental observations.

Perovskite/silicon tandem solar cells with high power conversion efficiencies have the potential to become a commercially viable photovoltaic option in the near future. However, device design and optimization is challenging because conventional characterization methods do not give clear feedback on the localized chemical and physical factors that limit performance within individual subcells, especially when stability and degradation is a concern. In this study, we use light beam induced current (LBIC) to probe photocurrent collection nonuniformities in the individual subcells of perovskite/silicon tandems. The choices of lasers and light biasing conditions allow efficiency-limiting effects relating to processing defects, optical interference within the individual cells, and the evolution of water-induced device degradation to be spatially resolved. The results reveal several types of microscopic defects and demonstrate that eliminating these and managing the optical properties within the multilayer structures will be important for future optimization of perovskite/silicon tandem solar cells.

We have developed a laser beam induced current imaging tool for photovoltaic devices and modules that utilizes diode pumped Q-switched lasers. Power densities on the order of one sun (100 mW/cm 2 ) can be produced in a ∼40 μm spot size by operating the lasers at low diode current and high repetition rate. Using galvanostatically controlled mirrors in an overhead configuration and high speed data acquisition, large areas can be scanned in short times. As the beam is rastered, focus is maintained on a flat plane with an electronically controlled lens that is positioned in a coordinated fashion with the movements of the mirrors. The system can also be used in a scribing mode by increasing the diode current and decreasing the repetition rate. In either mode, the instrument can accommodate samples ranging in size from laboratory scale (few cm 2 ) to full modules (1 m 2 ). Customized LabVIEW programs were developed to control the components and acquire, display, and manipulate the data in imaging mode.

We have discovered that films of carbon single wall nanotubes (SWNTs) make excellent back contacts to CdTe devices without any modification to the CdTe surface. Efficiencies of SWNT-contacted devices are slightly higher than otherwise identical devices formed with standard Au/Cu back contacts. The SWNT layer is thermally stable and easily applied with a spray process, and SWNT-contacted devices show no signs of degradation during accelerated life testing.