Search

Polysaccharides are effective stabilisers for plant-based milks, but their interfacial adsorption behaviours in plant milk system and effects on plant protein digestibility are still unclear. This study analysed the oil-water interfacial adsorption behaviours of pea protein concentrate (PPC) and isolate (PPI) mixed with neutral guar gum and anionic gellan gum to understand the stability and in vitro protein digestion of corresponding model pea milk system. Adding guar gum or gellan gum enhanced the interfacial adsorption stability of pea proteins without compromising proteolysis during gastrointestinal digestion. Gellan gum performed better than guar gum for long-term co-stabilising the emulsion with pea proteins, due to its electrostatic repulsion with pea proteins and stronger steric hindrance induced by thicker adsorbed interfacial layers (~10 % or ~37 % higher thickness than guar gum counterparts) as detected by a quartz crystal microbalance with dissipation (QCM-D) after rinsing. The model pea milks with 0.1 % (wt%) gellan gum were stable at 4 °C for 28 days regardless of protein types. The presence of polysaccharides at the interface enabled oil droplets to be kept separate during in vitro gastrointestinal digestion, improving the final proteolysis by ~4 to ~27 %. This result is conducive to selecting polysaccharides for developing pea protein-based beverages., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

This review highlights the development of plant proteins from a wide variety of sources, as most of the research and development efforts to date have been limited to a few sources including soy, chickpea, wheat, and pea. The native structure of plant proteins during production and their impact on food colloids including emulsions, foams, and gels are considered in relation to their fundamental properties, while highlighting the recent developments in the production and processing technologies with regard to their impacts on the molecular properties and aggregation of the proteins. The ability to quantify structural, morphological, and rheological properties can provide a better understanding of the roles of plant proteins in food systems. The applications of plant proteins as dairy and meat alternatives are discussed from the perspective of food structure formation. Future directions on the processing of plant proteins and potential applications are outlined to encourage the generation of more diverse plant-based products., (© 2024 The Author(s). Advanced Science published by Wiley‐VCH GmbH.)

The effects of polyphenols from Tasmanian pepper (Tasmannia Lanceolata) leaf and berry on the functional properties of pea protein were investigated in flaxseed oil-in-water emulsions. Phenolic acids and flavonols in Tasmanian pepper leaf with smaller molecular weights led to stronger non-covalent interactions with pea protein, while anthocyanins from Tasmanian pepper berry induced protein aggregation under acidic condition and co-existed with proteins in neutral and alkaline conditions. The total phenolic content was significantly increased with incorporation of polyphenols from Tasmanian pepper leaf (334.94-445.92 μg/mL) and berry (72.89-153.03 μg/mL) to pea protein (4.19-15.59 μg/mL). The oxidative stability of emulsions at pH 3 and 7 was enhanced, reducing TBARS value from 1.54 to 2.68 mg MDA/kg in pea protein to 0.56-0.85 mg MDA/kg after 2 weeks storage. These findings illustrated the distinct interactions between pea protein and different polyphenols from Tasmanian pepper leaf and berry to enhance the antioxidant capacity of pea protein., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper. Printed version of figures in black-and-white. No color in print is required., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Plant-based proteins, represented by amaranth in our study, embrace a potential as an ingredient for the functional-food formulation. However, their efficacy is hindered by inherent limitations in solubility, emulsification, and antioxidant traits. The Maillard reaction, a complex chemical-process resulting in a diverse array of products, including Maillard conjugates and Maillard reaction products (MRPs), can employ variable effects on these specific attributes. To elucidate the influence of this reaction and the MRPs on the aforementioned properties, we used a complex blend of dehydrated seaweed Gracilaria and amaranth protein to create a conjugate-MRP blend. Our investigations revealed that the resultant incorporation enhanced solubility, emulsification, and antioxidant properties, while the intermediates formed did not progress to advanced glycation stages. This change is likely attributed to the dual effect of conjugates that altered the secondary protein structure, while the generation and/or preservation of MRPs post ultrasonication and spray drying enhanced its antioxidant potential., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

This study aims to elucidate the stability of spray dried β-carotene microcapsules by identifying their surface composition using synchrotron-Fourier transform infrared (FTIR) microspectroscopy. To investigate the impact of enzymatic cross-linking and polysaccharide addition on heteroprotein, three wall materials were prepared: pea/whey protein blends (Con), cross-linked pea/whey protein blends (TG), and cross-linked pea/whey protein blends-maltodextrin complex (TG-MD). The TG-MD exhibited the highest encapsulation efficiency (>90 %) after 8 weeks of storage followed by TG and Con. Chemical images obtained using synchrotron-FTIR microspectroscopy confirmed that the TG-MD displayed the least amount of surface oil, followed by TG and Con, due to increasing amphiphilic β-sheet structure of the proteins led by cross-linking and maltodextrin addition. Both enzymatic cross-linking and polysaccharide addition improved the stability of β-carotene microcapsules, demonstrating that pea/whey protein blends with maltodextrin can be utilised as a hybrid wall material for enhancing the encapsulation efficiency of lipophilic bioactive compounds in foods., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Roasting could modify the protein structure/conformation, contributing to changes in functional properties. Here we investigated the effects of pre-roasting on the extraction efficiency, structural and functional properties of pea protein concentrates and isolates (PPC and PPI) produced from yellow split peas. The shorter roasting times (150 °C, 10 and 20 min) had little effect on protein yields and could increase the solubility of PPC or PPI by ∼ 12% at pH 7 and enhance the solubility of PPI by ∼ 12% (10-min roasting) and ∼ 24% (20-min roasting) at pH 3. However, a longer duration of pre-roasting (150 °C, 30 min) significantly reduced the extraction efficiency of PPC and PPI by ∼ 30% and ∼ 61%, respectively. Meanwhile, pre-roasting had minor effects on SDS-PAGE profiles and the secondary structures of pea proteins but significantly altered tertiary structures by reducing free sulfhydryl groups, increasing disulfide bonds and surface hydrophobicity. As for the emulsifying properties, pre-roasting improved the emulsion ability index (EAI) of PPC and PPI but decreased the emulsion stability index (ESI) of PPC and had no significant effect on PPI. Moreover, PPC and PPI with shorter pre-roasting duration (10 and 20 min) had endothermic peaks and showed a slight decrease in the denaturation temperature (T d ) and the onset temperature (T o ), respectively. Overall, the study demonstrated that controlled pre-roasting at 150 °C for 10 min and 20 min altered protein structures (mainly tertiary structures), improving the solubility and EAI of pea proteins at pH 7, while retaining their thermal properties in comparison to unroasted samples., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Recent advances in the understanding of formulations and processing techniques have allowed for greater freedom in plant-based emulsion gel design to better recreate conventional animal-based foods. The roles of plant-based proteins, polysaccharides, and lipids in the formulation of emulsion gels and relevant processing techniques such as high-pressure homogenization (HPH), ultrasound (UH), and microfluidization (MF), were discussed in correlation with the effects of varying HPH, UH, and MF processing parameters on emulsion gel properties. The characterization methods for plant-based emulsion gels to quantify their rheological, thermal, and textural properties, as well as gel microstructure, were presented with a focus on how they can be applied for food purposes. Finally, the potential applications of plant-based emulsion gels, such as dairy and meat alternatives, condiments, baked goods, and functional foods, were discussed with a focus on sensory properties and consumer acceptance. This study found that the implementation of plant-based emulsion gel in food is promising to date despite persisting challenges. This review will provide valuable insights for researchers and industry professionals looking to understand and utilize plant-based food emulsion gels.

Compared to traditional drug release monitoring with manual sampling and testing procedures, low-field nuclear magnetic resonance (LF-NMR) imaging is a one-step, visual, non-destructive, and non-invasive measurement method. Here, we reported the application of LF-NMR to image the morphology, component, sub-diffusion, and spatial distribution of a solid oral formulation, Biyankang tablets, during dissolution in vitro. The drug ingredients with characteristic relaxation times were distinguished and localized based on the signal of standards, such as patchouli oil, Xanthium strumarium extract, and starch. The hydration, swelling, disintegration, and sub-diffusion of tablets in simulated gastric fluids (SGF) were visualized statically. All tablets showed similar expansion (37.4-42.0%) along the direction of thickness at 25 min and reached a full disintegration at 145 min, at pH 1.80-6.15, indicating pH-independent swelling and disintegration. Compared to that static immersion within 20 mL SGF, the tablet disintegration time was shortened by ~ 11% in 30 mL SGF. The application of shear reduced the time by ~ 28%, suggesting a major role of hydrodynamic condition in tablet dissolution. The ability to simultaneously visualize, distinguish, and localize drug ingredients using LF-NMR is expected to provide valuable information to develop drug release monitoring systems in vitro and potentially in vivo using small animal studies., (© 2022. The Author(s), under exclusive licence to American Association of Pharmaceutical Scientists.)

Saturated fatty acid-containing lipids, such as milkfat, may protect long chain polyunsaturated fatty acids in fish oil when blended together into solid lipid particles (SLPs). One of the main challenges of SLPs is structural polymorphism, which can lead to expulsion of the protected component during prolonged storage. To investigate this phenomenon, the change in thermal and crystalline behaviours, and fatty acid distribution, were analysed in SLPs of fish oil and milkfat during storage at different temperatures for up to 28 days. X-ray diffraction analysis showed changes in molten and crystalline states occurred even at -22 °C. Room temperature (21 °C) storage led to more than 45% molten state but SLPs retained their initial shape. Confocal Raman Spectroscopy of the SLPs showed the distribution of fatty acids was not uniform, with 10 μm outermost layer of predominantly saturated fatty acids likely responsible for the intact SLP shape and stability of the core., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

A dynamic in vitro human stomach (DIVHS), simulating the anatomical structures, peristalsis, and biochemical environments of a real stomach as practically as possible, was applied to mimic the gastric pH and emptying during yogurt digestion in short/long gastric residence times. The influences of peristalsis, dilution, and proteolysis on digesta viscosity were quantified respectively, indicating the dominant role of proteolysis and dilution. After incorporating curcumin-whey protein microparticles with targeted-release formula in yogurt, the peak curcumin release during intestinal digestion reached 43% at 120 min in the short gastric residence time and 16% at 180 min in the long gastric residence time. The change in the maximum curcumin release depended on the gastric emptying kinetics in each residence time. This emptying-kinetics dependence was reflected by the slower microparticle disintegration and proteolysis in the long gastric residence time. The dynamic reproduction of realistic gastric conditions using DIVHS helps revealing controlled release from foods., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Plant-derived protein research has gained attention in recent years due to the rise of health concerns, allergenicity, trends toward vegan diet, food safety, and sustainability; but the lower techno-functional attributes of plant proteins compared to those of animals still remain a challenge for their utilization. Maillard conjugation is a protein side-chain modification reaction which is spontaneous, and do not require additional chemical additive to initiate the reaction. The glycoconjugates formed during the reaction significantly improves the thermal stability and pH sensitivity of proteins. The modification of plant-derived protein using Maillard conjugation requires a comprehensive understanding of the influence of process conditions on the conjugation process. These factors can be used to establish a correlation with different functional and bioactive characteristics, to potentially adapt this approach for selective functionality enhancement and nutraceutical development. This review covers recent advances in plant-derived protein modification using Maillard conjugation, including different pretreatments to modify the functionality and bioactivity of plant proteins and their potential uses in practice. An overview of different properties of conjugates and MRPs, including food safety aspects, is given.

Curcumin is a bioactive food component, with poor bioaccessibility due to low water solubility and stability. Spray drying retained and in fact enhanced curcumin-whey protein isolate (WPI) complexation via desolvation, lowering the amount of unbound curcumin to <5% wt after drying, forming microparticles with better water solubility, stability, and bioaccessibility than raw curcumin. The desolvated microparticles encapsulated 3.47 ± 0.05 mg/g curcumin, almost one order of magnitude higher than the un-desolvated sample 0.37 ± 0.03 mg/g. After incorporation into yogurt, the rapid-release formula liberated 87% curcumin, whereas the targeted-release one discharged 44% before entering the simulated intestinal condition. Most of the yogurt sensory properties were not adversely affected, except for colour and curcumin flavour. This study proposed a strategy in which food ingredients containing hydrophobic bioactive small molecules can be incorporated into a food matrix to improve bioaccessibility and targeted release, without affecting their sensory properties., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Asthma (chronic allergic airways disease, AAD) is characterized by airway inflammation (AI), airway remodeling (AWR) and airway hyperresponsiveness (AHR). Current treatments for AAD mainly focus on targeting AI and its contribution AHR, with the use of corticosteroids. However, there are no therapies for the direct treatment of AWR, which can contribute to airway obstruction, AHR and corticosteroid resistance independently of AI. The acute heart failure drug, serelaxin (recombinant human gene-2 relaxin, RLX), has potential anti-remodeling and anti-fibrotic effects but only when continuously infused or injected to overcome its short half-life. To alleviate this limitation, we conjugated serelaxin to biodegradable and noninflammatory nanoparticles (NP-RLX) and evaluated their therapeutic potential on measures of AI, AWR and AHR, when intranasally delivered to a preclinical rodent model of chronic AAD and TGF-β1-stimulated collagen gel contraction from asthma patient-derived myofibroblasts. NP-RLX was preferentially taken-up by CD206 + -infiltrating and CD68 + -tissue resident alveolar macrophages. Furthermore, NP-RLX ameliorated the chronic AAD-induced AI, pro-inflammatory cytokines (IL-1β, IL-6, TNF-α), chemokines (CCL2, CCL11) and the pro-fibrotic TGF-β1/IL-1β axis on AWR and resulting AHR, as well as human myofibroblast-induced collagen gel contraction, to a similar extent as unconjugated RLX. Hence, NP-RLX represents a novel strategy for treating the central features of asthma., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Vaccines against blood-stage malaria often aim to induce antibodies to neutralize parasite entry into red blood cells, interferon gamma (IFNγ) produced by T helper 1 (Th1) CD4+ T cells or interleukin 4 (IL-4) produced by T helper 2 (Th2) cells to provide B cell help. One vaccine delivery method for suitable putative malaria protein antigens is the use of nanoparticles as vaccine carriers. It has been previously shown that antigen conjugated to inorganic nanoparticles in the viral-particle size range (~40-60 nm) can induce protective antibodies and T cells against malaria antigens in a rodent malaria challenge model. Herein, it is shown that biodegradable pullulan-coated iron oxide nanoparticles (pIONPs) can be synthesized in this same size range. The pIONPs are non-toxic and do not induce conventional pro-inflammatory cytokines in vitro and in vivo. We show that murine blood-stage antigen MSP4/5 from Plasmodium yoelii could be chemically conjugated to pIONPs and the use of these conjugates as immunogens led to the induction of both specific antibodies and IFNγ CD4+ T cells reactive to MSP4/5 in mice, comparable to responses to MSP4/5 mixed with classical adjuvants (e.g., CpG or Alum) that preferentially induce Th1 or Th2 cells individually. These results suggest that biodegradable pIONPs warrant further exploration as carriers for developing blood-stage malaria vaccines.

The blend of fish oil with a high percentage of long chain poly-unsaturated fatty acids, and milkfat with a high percentage of saturated fatty acids, could potentially demonstrate desirable characteristics from both components, such as increased omega-3 fatty acids and melting point, as well as improved crystallization and oxidative stability. In this study, the effect of various milkfat concentrations on thermal properties and crystalline structure of these blends were analysed to understand parameters determining the overall characteristics of the blend. Blends with different ratios of fish oil: milkfat (9:1, 7:3, 5:5, 3:7, 1:9), as well as pure fish oil and pure milkfat, were investigated at different cooling conditions. The crystallization behaviour in all samples shifted to lower temperature ranges, by increasing the cooling rate from 1 to 32 °C/min. However, the changes in cooling rate did not have significant effect on the melting profile of the samples. Whereas changes in milkfat ratio affect both the crystallization and melting behaviour. New crystallization peaks were observed on DSC spectra between the range of -4 to -13 °C in the blends. Moreover, new melting peaks appeared in two ranges of -1 to -8 °C and 8-9 °C, in the blends. The crystallization and melting behaviour of the blends were similar to those of milkfat when >30% milkfat was used. This was further confirmed via XRD where milkfat demonstrated the dominant polymorphic behaviour. Regarding shape of the crystals, fractal dimension analysis showed a similarity between clusters in blends containing 50% milkfat or higher. Increasing the ratio of milkfat led to an increase in fractal dimension which indicates higher mass-spatial distribution of the crystal networks in the blends. The data showed that adding 30% or more milkfat to pure fish oil resulted in blends demonstrating similar characteristics to milkfat, including thermal, structural, and oxidative stability. This shows the potential of blending a high percentage of docosahexaenoic acid in milk fat to improve their overall stability., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

The construction of biological proton channel analogues has attracted substantial interest owing to their wide potential in separation of ions, sensing, and energy conversion. Here, metal-organic framework (MOF)/polymer heterogeneous nanochannels are presented, in which water molecules are confined to disordered clusters in the nanometer-sized polymer regions and to ordered chains with unique molecular configurations in the 1D sub-1-nm porous MOF regions, to realize unidirectional, fast, and selective proton transport properties, analogous to natural proton channels. Given the nano-to-subnano confined water junctions, experimental proton conductivities in the polymer-to-MOF direction of the channels are much higher than those in the opposite direction, showing a high rectification up to 500 and one to two orders of magnitude enhancement compared to the conductivity of proton transport in bulk water. The channels also show a good proton selectivity over other cations. Theoretical simulations further reveal that the preferential and fast proton conduction in the nano-to-subnano channel direction is attributed to extremely low energy barriers for proton transport from disordered to ordered water clusters. This study opens a novel approach to regulate ion permeability and selectivity of artificial ion channels., (© 2020 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Biological proton channels are sub-1-nm protein pores with ultrahigh proton (H + ) selectivity over other ions. Inspired by biological proton channels, developing artificial proton channels with biological-level selectivity is of fundamental significance for separation science. Herein we report synthetic proton channels fabrication based on sulfonated metal-organic frameworks (MOFs), UiO-66-X, X = SAG, NH-SAG, (NH-SAG) 2 (SAG: sulfonic acid groups), which have sub-1-nm windows and a high density of sulfonic acid groups mimicking natural proton channels. The ion conductance of UiO-66-X channels follows the sequence: H + ≫ K + > Na + > Li + , and the sulfonated UiO-66 derivative channels show proton selectivity much higher than that of the pristine UiO-66 channels. Particularly, the UiO-66-(NH-SAG) 2 channels exhibit ultrahigh proton selectivities, H + /Li + up to ∼100, H + /Na + of ∼80, and H + /K + of ∼70, which are ∼3 times of that of UiO-66-NH-SAG channels, and ∼15 times of that of UiO-66@SAG channels. The ultrahigh proton selectivity in the sulfonated sub-1-nm MOF channels is mainly attributed to the narrow window-cavity pore structure functionalized with nanoconfined high-density sulfonic acid groups that facilitate fast proton transport and simultaneously exclude other cations. Our work opens an avenue to develop functional MOF channels for selective ion conduction and efficient ion separation.

Mesoporous aluminosilicates are promising solid acid catalysts. They are also excellent supports for transition metal catalysts for various catalytic applications. Synthesis of mesoporous aluminosilicates with controllable particle size, morphology, and structure, as well as adjustable acidity and high hydrothermal stability, is very desirable. In this work, we demonstrate the scalable synthesis of Al-SBA-15 microspheres with controllable physicochemical properties by using the microfluidic jet-spray-drying technology. The productivity is up to ∼30 g of dried particles per nozzle per hour. The Al-SBA-15 microspheres possess uniform controllable micron sizes (27.5-70.2 μm), variable surface morphologies, excellent hydrothermal stability (in pure steam at 800 °C), high surface areas (385-464 m 2 /g), ordered mesopore sizes (5.4-5.8 nm), and desirable acid properties. The dependence of various properties, including particle size, morphology, porosity, pore size, acidity, and hydrothermal stability, of the obtained Al-SBA-15 microspheres on experimental parameters including precursor composition (Si/Al ratio and solid content) and processing conditions (drying and calcination temperatures) is established. A unique morphology transition from smooth to wrinkled microsphere triggered by control of the Si/Al ratio and solid content is observed. The particle formation and morphology-evolution mechanism are discussed. The Al-SBA-15 microspheres exhibit high acid catalytic performance for aldol-condensation reaction between benzaldehyde and ethyl alcohol with a high benzaldehyde conversion (∼56.3%), a fast pseudo-first-order reaction rate (∼0.1344 h -1 ), and a high cyclic stability, superior to the commercial zeolite acid (H-ZSM-5). Several influencing factors on the catalytic performance of the obtained Al-SBA-15 microspheres are also studied.

Despite developments in pulmonary radiotherapy, radiation-induced lung toxicity remains a problem. More sensitive lung imaging able to increase the accuracy of diagnosis and radiotherapy may help reduce this problem. Super-paramagnetic iron oxide nanoparticles are used in imaging, but without further modification can cause unwanted toxicity and inflammation. Complex carbohydrate and polymer-based coatings have been used, but simpler compounds may provide additional benefits. Herein, we designed and generated super-paramagnetic iron oxide nanoparticles coated with the neutral natural dietary amino acid glycine (GSPIONs), to support non-invasive lung imaging and determined particle biodistribution, as well as understanding the impact of the interaction of these nanoparticles with lung immune cells. These GSPIONs were characterized to be crystalline, colloidally stable, with a size of 12 ± 5 nm and a hydrodynamic diameter of 84.19 ± 18 nm. Carbon, Hydrogen, Nitrogen (CHN) elemental analysis estimated approximately 20.2 × 10 3 glycine molecules present per nanoparticle. We demonstrated that it is possible to determine the biodistribution of the GSPIONs in the lung using three-dimensional (3D) ultra-short echo time magnetic resonance imaging. The GSPIONs were found to be taken up selectively by alveolar macrophages and neutrophils in the lung. In addition, the GSPIONs did not cause changes to airway resistance or induce inflammatory cytokines. Alveolar macrophages and neutrophils are critical regulators of pulmonary inflammatory diseases, including allergies, infections, asthma and chronic obstructive pulmonary disease (COPD). Therefore, pulmonary Magnetic Resonance (MR) imaging and preferential targeting of these lung resident cells by our nanoparticles offer precise imaging tools, which can be utilized to develop precision targeted radiotherapy as well as diagnostic tools for lung cancer, thereby having the potential to reduce the pulmonary complications of radiation.

High desalination efficiency in principle could be achieved by layer-by-layer graphene oxide (GO) membranes, which benefits from their entrance-functionalized channels assembled by edge-functionalized GO nanosheets. The effects of these edge functional groups on desalination, however, are not fully understood yet. To study the isolated influence of three typical edge functional groups, namely, carboxyl (-COOH), hydroxyl (-OH), and hydrogen (-H), molecular dynamics simulation was used in this work. The results revealed that the edge volumetric blockage effect, resulting in ion permeability at G-H > G-OH > G-COOH membranes, was the dominant mechanistic effect inside the GO membranes with 7 Å interlayer channels. The OH edge has the same effect as the H edge in NaCl/water selectivity because of a unique "ion pulling" effect. Moreover, the OH and H edge-functionalized membranes with 7 Å interlayer channels showed preferential Na + and Cl - rejections, respectively. This kind of preference leads to a cycle of charging and neutralization in the penetrant reservoir throughout the filtration process. The results from this work suggested that it would be strategic to keep the COOH and H edge functional groups, to maintain the size of interlayer channels in order to stimulate the effects of edge functional groups, and to increase the membrane porosity for designing higher desalination efficiency GO membranes.

Effective design of bifunctional catalysts for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is important but remains challenging. Herein, we report a three-dimensional (3D) hierarchical structure composed of homogeneously distributed Ni-Fe-P nanoparticles embedded in N-doped carbons on nickel foams (denoted as Ni-Fe-P@NC/NF) as an excellent bifunctional catalyst. This catalyst was fabricated by an anion exchange method and a low-temperature phosphidation of nanotubular Prussian blue analogue (PBA). The Ni-Fe-P@NC/NF displayed exceptional catalytic activity toward both HER and OER and delivered an ultralow cell voltage of 1.47 V to obtain 10 mA cm -2 with extremely excellent durability for 100 h when assembled as a practical electrolyser. The extraordinary performance of Ni-Fe-P@NC/NF is attributed to the abundance of unsaturated active sites, the well-defined hierarchical porous structure, and the synergistic effect between multiple components. Our work will inspire more rational designs of highly active non-noble electrocatalysts for industrial energy applications., Competing Interests: Declaration of Interests The authors declare no competing interests., (Copyright © 2019 The Authors. Published by Elsevier Inc. All rights reserved.)

The fast and scalable spray-drying-assisted evaporation-induced self-assembly (EISA) synthesis of hierarchically porous SBA-15-type silica microparticles from a water-based system is demonstrated. The SBA-15-type silica microparticles has bowl-like shapes, uniform micro-sizes (∼90 µm), large ordered mesopores (∼9.5 nm), hierarchical meso-/macropores (20-100 nm) and open surfaces. In the synthesis, soft- and hard-templating approaches are combined in a single rapid drying process with a non-ionic tri-block copolymer (F127) and a water-insoluble polymer colloid (Eudragit RS, 120 nm) as the co-templates. The RS polymer colloid plays three important roles. First, the RS nanoparticles can be partially dissolved by in-situ generated ethanol to form RS polymer chains. The RS chains swell and modulate the hydrophilic-hydrophobic balance of F127 micelles to allow the formation of an ordered mesostructure with large mesopore sizes. Without RS, only worm-like mesostructure with much smaller mesopore sizes can be formed. Second, part of the RS nanoparticles plays a role in templating the hierarchical pores distributed throughout the microparticles. Third, part of the RS polymer forms surface "skins" and "bumps", which can be removed by calcination to enable a more open surface structure to overcome the low pore accessibility issue of spray-dried porous microparticles. The obtained materials have high surface areas (315-510 m 2  g -1 ) and large pore volumes (0.64-1.0 cm 3  g -1 ), which are dependent on RS concentration, HCl concentration, silica precursor hydrolysis time and drying temperature. The representative materials are promising for the adsorption of lysozyme. The adsorption occurs at a >three-fold faster rate, in a five-fold larger capacity (an increase from 20 to 100 mg g -1 ) and without pore blockage compared with the adsorption of lysozyme onto spray-dried microparticles of similar physicochemical properties obtained without the use of RS., (Copyright © 2019 Elsevier Inc. All rights reserved.)

The use of nanoparticles for pulmonary delivery poses challenges such as the presence of anatomical barriers and the loss of bioactive components. Excipients are often used to facilitate delivery. Excipients suitable for nanoparticle delivery are still being explored. Herein we introduce for the first time, spray-dried glycine microparticle-based excipients loaded with nanoparticles of the size range known to be taken up by alveolar macrophages. Using a microfluidic jet spray dryer, we produced glycine microparticles-based excipients which are spherical, uniform, cenospheric (hollow at core), and "coral-like" with average diameter of 60 ± 10 μm, 29 ± 0.8% porosity, and showed their effective loading with glycine coated iron oxide superparamagnetic nanoparticles (GSPIONs). Our loading protocol with nanoparticles further increased microsphere porosity and improved aerodynamic performance unlike the dense, solid commercial excipient, Lactohale200™. This demonstrates a feasible approach for delivery of such nanoparticles in the lung., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Graphene-based laminar membranes open new avenues for water treatment; in particular, reduced graphene oxide (rGO) membranes with high stability in aqueous solutions are gaining increased attention for desalination. However, the low water permeability of these membranes significantly limits their applications. In this study, the water permeability of thermally reduced GO membrane was increased by a factor of 26 times by creating in-plane nanopores with an average diameter of ∼3 nm and a high density of 2.89 × 10 15 m -2 via H 2 O 2 oxidation. These in-plane nanopores provide additional transport channels and shorten the transport distance for water molecules. Meanwhile, salt rejection of this membrane is dominated by both the Donnan effect and the size exclusion of the interspaces. Besides, the water permeability and salt rejection of the thermally reduced nanoporous GO membrane can also be simply tuned by adjusting the thermal treatment time and membrane thickness. Additionally, the fabricated membrane exhibited a relatively stable rejection of Na 2 SO 4 during the long-term testing. This work demonstrates a novel and effective strategy for fabricating high-performance laminar rGO membranes for desalination applications.

This study reports on the preparation of riboflavin-loaded whey protein isolate (WPI) microparticles, using desolvation and then spray drying. Ethanol desolvation led to the exposure of embedded hydrophobic amino acids of WPI to riboflavin, facilitating the formation of riboflavin-WPI complexes. The extent of desolvation and cross-linking influenced the morphology of the spray-dried microparticles, while the moisture content of microparticles decreased with desolvation and increased with crosslinking. The modification of WPI conformation upon desolvation could be retained in the dry state via spray drying. The gastric resistance, release site and release characteristics of microparticles were readily adjusted by varying the ethanol and calcium ion contents from 0 to 50% v/v and from 0 to 2 mM, respectively. The sample prepared from 30% v/v ethanol without calcium crosslinking displayed rapid peptic digestion in less than 30 min. The samples from 30% v/v ethanol at 1 and 2 mM Ca 2+ exhibited excellent gastric resistance and intestinal release., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

The surface structure of crystalline particles affects the functionality of the particles in drug delivery. Prediction of the final structure of particles that crystallize easily within the spray drying process is of interests for many applications. A theoretical framework was developed for the prediction of crystal structure precipitating on the surface of the particle. This model was based on the dimensionless Damkohler number (Da), to be an indicator of final particle morphology. Timescales of evaporation and reaction were required for calculation of the Damkohler number. The modified evaporation time scale was estimated based on the time that is available for the crystal to precipitate after supersaturation. The reaction time scale was estimated based on the time scale for induction time. Mannitol was produced under different processing conditions in order to validate the theoretical model. Results showed for the high Damkohler numbers, the surface structure of the particle was rough, while smaller Damkohler numbers led to relatively smooth particle surfaces. Additionally, although the beta polymorph was dominant in all of the experiments, alpha polymorph was precipitated in the experiments with a large Damkohler number. The theoretical framework developed will be a useful predictive tool to guide the manipulation of particle crystallization in spray dryers., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Adsorption and catalytic conversion of nitrophenols (NPs) over carbon-based materials have attracted wide interest. Batch adsorption and catalytic reduction of NPs have been widely reported, but less attention has been paid to flow systems, which require high particle size uniformity and superior active site accessibility. Herein, uniform mesoporous carbon hollow microspheres with their surfaces enriched by Au nanoparticles (denoted as Au@UMCHMs) are synthesized. The surface-enriched Au nanoparticle loading is promoted by the unique feature, that is, relatively dense external layers and mesoporous inner shells, of the carbon microspheres and the simple impregnation-reduction method. The Au@UMCHMs possess uniform sizes of ∼82 μm, small shell thickness of ∼5.8 μm, high specific surface area (∼1587 m 2 /g), and uniform mesopores (2.1 and 5.8 nm). They show excellent performance for flow adsorption and catalytic reduction of 4-nitrophenol (4-NP), superior to that of conventional Au-loaded carbon materials. In flow adsorption of 4-NP, the Au@UMCHMs show a fast and complete removal efficiency with high adsorption capacities (∼223 mg/g at breakthrough). They show outstanding performance in flow catalytic reduction of 4-NP. 4-NP with high concentrations (up to 100 mg/L) can be ultrafast and completely catalytically reduced to 4-aminophenol (4-AP) under rapid flow rates (up to ∼25 mL/min)., (Copyright © 2018 Elsevier Inc. All rights reserved.)

Graphene oxide (GO) membranes assembled by GO nanosheets exhibit high water flux because of the unique water channels formed by their functionalized layer-by-layer structure. Although water transport in the GO membrane is in principle influenced by the functional groups at the edges of GO nanosheets, this is yet to be fully understood. To fill this knowledge gap, molecular dynamics simulation was employed in this work to gain insights into the influences of three typical edge functional groups of GO nanosheets: carboxyl (COOH), hydroxyl (OH), and hydrogen (H). A well-controlled numerical analysis with complete isolation of the functional groups at the edges was undertaken. The results reveal that the COOH group has a negative impact on water transport because of its relatively large steric geometric structure, which resists water flow. By contrast, the OH group promotes water transport by uniquely "pulling" water molecules across the nanosheet layer because of its relatively stronger interaction with water. The H atom promotes water transport as well, mainly because of its low-resistance steric structure. Moreover, the size of the inter-edge hub has an apparent impact on the influence of these functional groups on water transport. The results suggest that in the design of high water flux GO membranes, it would be strategic to remove COOH edge functional groups while maintaining a mixture of OH and H edge functional groups.

CoS2-MoS2 nanoflakes decorated MoO2 (CoMoOS) hybrid submicro-wires with rich active interfaces were synthesized via the sulfuration of CoMoO4. They showed excellent activity while synergistically catalyzing the hydrogen evolultion reaction (HER) in basic media by promoting both the water dissociation and hydrogen absorption steps. Thus, the CoMoOS catalysts only needed 123 mV to achieve 10 mA cm-2 with a small Tafel slope in alkaline solutions, and required 1.68 V to obtain the same current density when assembled into an alkaline electrolyser.

Introduction: Airway inflammatory disorders are prevalent diseases in need of better management and new therapeutics. Immunotherapies offer a solution to the problem of corticosteroid resistance. Areas covered: The current review focuses on lipopolysaccharide (Gram-negative bacterial endotoxin)-mediated inflammation in the lung and the animal models used to study related diseases. Endotoxin-induced lung pathology is usually initiated by antigen presenting cells (APC). We will discuss different subsets of APC including lung dendritic cells and macrophages, and their role in responding to endotoxin and environmental challenges. Expert commentary: The pharmacotherapeutic considerations to combat airway inflammation should cost-effectively improve quality of life with sustainable and safe strategies. Selectively targeting APCs in the lung offer the potential for a promising new strategy for the better management and treatment of inflammatory lung disease.

The field of medical diagnostics and therapeutics is being revolutionized by nanotechnology, from targeted drug delivery to cancer immunotherapy. Inorganic nanoparticles are widely used, albeit problems with agglutination, cytotoxicity, free radical generation, and instability in some biological environments limits their utility. Conjugation of biomolecules such as peptides to the surface of nanoparticles can mitigate such problems, as well as confer specialized theranostic (therapeutic and/or diagnostic) properties, useful across biomedical applications such as vaccines, drug delivery, and in vivo imaging. Coating with amino acids, rather than peptides, offers further a highly cost-effective approach (due to their ease of purification and availability), but is currently an underutilized way to decrease toxicity and enhance stability. Amino acid molecules are small (<200 Da) and have both positive and negative charge groups (zwitterionic) facilitating charge-specific molecule binding. Additionally, amino acids exert by themselves some useful biological functions, with antibacterial and viability enhancing properties (for eukaryotic cells). Overall particle size, nanoparticle core, and the specific amino acid used to functionalize their surface influence their biodistribution, and their effects on host immunity. In this review, we provide for the first time an overview of this emerging field, and identify gaps in knowledge for future research.

Smart surface coatings of silicon (Si) nanoparticles are shown to be good examples for dramatically improving the cyclability of lithium-ion batteries. Most coating materials, however, face significant challenges, including a low initial Coulombic efficiency, tedious processing, and safety assessment. In this study, a facile sol-gel strategy is demonstrated to synthesize commercial Si nanoparticles encapsulated by amorphous titanium oxide (TiO 2 ), with core-shell structures, which show greatly superior electrochemical performance and high-safety lithium storage. The amorphous TiO 2 shell (≈3 nm) shows elastic behavior during lithium discharging and charging processes, maintaining high structural integrity. Interestingly, it is found that the amorphous TiO 2 shells offer superior buffering properties compared to crystalline TiO 2 layers for unprecedented cycling stability. Moreover, accelerating rate calorimetry testing reveals that the TiO 2 -encapsulated Si nanoparticles are safer than conventional carbon-coated Si-based anodes., (© 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

We successfully synthesized a novel electro-catalyst with a unique structure of Ni 2 P nanoparticles decorating the surface of MoO 2 @MoS 2 sub-microwires on titanium foil (denote as NiMoO-SP/Ti) via a facile temperature-programmed sulfuration-phosphorization from its nickel molybdate precursor. The metallic MoO 2 core facilitates electron transfer, and the interfaces between MoS 2 nanosheets and Ni 2 P nanoparticles enhance catalytic activity both for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Due to this unique structure, the obtained NiMoO-SP/Ti showed an enhanced OER performance in alkaline solution with a small Tafel slope of 85 mV dec -1 and a low overpotential of 280 and 360 mV to achieve 10 and 100 mA cm -2 in 1.0 M KOH, respectively. The catalyst also exhibited an excellent stability in 1.0 M KOH, with just 12 mV shift after electrolysis at 10 mA cm -2 for 16 h and 27 mV shift after electrolysis at 20 mA cm -2 for another 24 h. In addition, the NiMoO-SP/Ti also displayed high catalytic properties towards HER with a small Tafel slope of 77 mV dec -1 and a low overpotential of 159 mV to obtain 10 mA cm -2 in 1.0 M KOH. After electrolysis at -10 mA cm -2 for 40 h, the overpotential increased by just 25 mV, which demonstrated its high stability for HER in 1.0 M KOH. This work provides an effective route to designing a high-performance catalyst with a favorable structure for the development of electro-catalysts for water splitting.

The construction, characterization and surgical application of a multilayered iron oxide-based macroporous composite framework were reported in this study. The framework consisted of a highly porous iron oxide core, a gelatin-based hydrogel intermediary layer and a matrigel outer cover, which conferred a multitude of desirable properties including excellent biocompatibility, improved mechanical strength and controlled biodegradability. The large pore sizes and high extent of pore interconnectivity of the framework stimulated robust neovascularization and resulted in substantially better cell viability and proliferation as a result of improved transport efficiency for oxygen and nutrients. In addition, rat models with myocardial infraction showed sustained heart tissue regeneration over the infract region and significant improvement of cardiac functions following the surgical implantation of the framework. These results demonstrated that the current framework might hold great potential for cardiac repair in patients with myocardial infraction., Competing Interests: Competing Interests: The authors have declared that no competing interest exists.

DNA vaccines offer cost, flexibility, and stability advantages, but administered alone have limited immunogenicity. Previously, we identified optimal configurations of magnetic vectors comprising superparamagnetic iron oxide nanoparticles (SPIONs), polyethylenimine (PEI), and hyaluronic acid (HA) to deliver malaria DNA encoding Plasmodium yoelii (Py) merozoite surface protein MSP1 19 (SPIONs/PEI/DNA + HA gene complex) to dendritic cells and transfect them with high efficiency in vitro. Herein, we evaluate their immunogenicity in vivo by administering these potential vaccine complexes into BALB/c mice. The complexes induced antibodies against PyMSP1 19 , with higher responses induced intraperitoneally than intramuscularly, and antibody levels further enhanced by applying an external magnetic field. The predominant IgG subclasses induced were IgG2a followed by IgG1 and IgG2b. The complexes further elicited high levels of interferon gamma (IFN-γ), and moderate levels of interleukin (IL)-4 and IL-17 antigen-specific splenocytes, indicating induction of T helper 1 (Th1), Th2, and Th17 cell mediated immunity. The ability of such DNA/nanoparticle complexes to induce cytophilic antibodies together with broad spectrum cellular immunity may benefit malaria vaccines.

High-power sodium-ion batteries (SIBs) with long-term cycling attract increasing attention for large-scale energy storage. However, traditional SIBs toward practical applications still suffer from low rate capability and poor cycle induced by pulverization and amorphorization of anodes at high rate (over 5 C) during the fast ion insertion/extraction process. The present work demonstrates a robust strategy for a variety of (Sb-C, Bi-C, Sn-C, Ge-C, Sb-Bi-C) freestanding metal-carbon framework thin films via a space-confined superassembly (SCSA) strategy. The sodium-ion battery employing the Sb-C framework exhibits an unprecedented performance with a high specific capacity of 246 mAh g -1 , long life cycle (5000 cycles), and superb capacity retention (almost 100%) at a high rate of 7.5 C (3.51A g -1 ). Further investigation indicates that the unique framework structure enables unusual reversible crystalline-phase transformation, guaranteeing the fast and long-cyclability sodium storage. This study may open an avenue to developing long-cycle-life and high-power SIBs for practical energy applications.

The dominant presence of fat at the surface of spray-dried milk powders has been widely reported in the literature and described as resulting in unfavourable powder properties. The mechanism(s) causing this phenomenon are yet to be clearly identified. A systematic investigation of the component distribution in atomized droplets and spray-dried particles consisting of model milk systems with different fat contents demonstrated that atomization strongly influences the final surface composition. Cryogenic flash-freezing of uniform droplets from a microfluidic jet nozzle directly after atomization helped to distinguish the influence of the atomization stage from the drying stage. It was confirmed that the overrepresentation of fat on the surface is independent of the atomization technique, including a pressure-swirl single-fluid spray nozzle and a pilot-scale rotary disk spray dryer commonly used in industry. It is proposed that during the atomization stage a disintegration mechanism along the oil-water interface of the fat globules causes the surface predominance of fat. X-ray photoelectron spectroscopic measurements detected the outermost fat layer and some adjacent protein present on both atomized droplets and spray-dried particles. Confocal laser scanning microscopy gave a qualitative insight into the protein and fat distribution throughout the cross-sections, and confirmed the presence of a fat film along the particle surface. The film remained on the surface in the subsequent drying stage, while protein accumulated underneath, driven by diffusion. The results demonstrated that atomization induces component segregation and fat-rich surfaces in spray-dried milk powders, and thus these cannot be prevented by adjusting the spray drying conditions., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Over the past few decades the direct assembly of optical nanomaterials into ordered mesoporous frameworks has proved to be a considerable challenge. Here we propose the incorporation of ultrasmall (sub-5-nm) graphitic pencil nanodots into ordered mesoporous frameworks for the fabrication of optoelectronic materials. The nanodots, which were prepared from typical commercial graphite pencils by an electrochemical tailoring process, combine properties such as uniform size (∼3 nm), excellent dispersibility and high photoconversion efficiency (∼27%). These nanodots were incorporated into a variety of ordered mesoporous frameworks (TiO2, silica, carbon and silica-carbon materials) by co-assembly, driven by hydrogen bonding, with the frameworks' precursors. The resulting materials showed a high degree of ordering, and a sharp increase in their optical performance (for example, photocurrent density). We envisage that the large-scale synthesis of ultrasmall carbon nanodots and their incorporation into ordered mesoporous frameworks may facilitate the preparation of materials with a variety of optical properties.

Prussian blue (PB), the oldest synthetic coordination compound, is a classic and fascinating transition metal coordination material. Prussian blue is based on a three-dimensional (3-D) cubic polymeric porous network consisting of alternating ferric and ferrous ions, which provides facile assembly as well as precise interaction with active sites at functional interfaces. A fundamental understanding of the assembly mechanism of PB hetero-interfaces is essential to enable the full potential applications of PB crystals, including chemical sensing, catalysis, gas storage, drug delivery and electronic displays. Developing controlled assembly methods towards functionally integrated hetero-interfaces with adjustable sizes and morphology of PB crystals is necessary. A key point in the functional interface and device integration of PB nanocrystals is the fabrication of hetero-interfaces in a well-defined and oriented fashion on given substrates. This review will bring together these key aspects of the hetero-interfaces of PB nanocrystals, ranging from structure and properties, interfacial assembly strategies, to integrated hetero-structures for diverse sensing.

Malaria vaccine research has been ongoing since the 1980s with limited success. However, recent improvements in our understanding of the immune responses required to combat each stage of infection will allow for intelligent design of both antigens and their associated delivery vaccine vehicles/vectors. Synthetic carriers (also known as vectors) are usually particulate and have multiple properties, which can be varied to control how an associated vaccine interacts with the host, and consequently how the immune response develops. This review comprehensively analyzes both historical and recent studies in which synthetic carriers are used to deliver malaria vaccines. Furthermore, the requirements for a synthetic carrier, such as size, charge, and surface chemistry are reviewed in order to understand the design of effective particle-based vaccines against malaria, as well as providing general insights. Synthetic carriers have the ability to alter and direct the immune response, and a better control of particle properties will facilitate improved vaccine design in the near future.

Reconstituted skim milk (RSM) is a reputed protective carrier for improving the survival ratio of lactic acid bacteria (LAB) after spray drying; however the underlying mechanisms of the prominent protection remains unclear. In this study, the inactivation histories of two LAB strains during droplet drying with four carriers were experimentally determined, and the effects of droplet drying parameters on LAB inactivation were investigated. For the first time, the possible contribution of each RSM components to the maintenance of LAB viability during drying was discussed. Rapid inactivation of LAB cells only started at the later stage of drying, where RSM could maintain viability better upon both high droplet temperature and low moisture content than the other three carriers tested. Such protective effects was attributed to calcium and milk proteins rather than lactose. Upon the rapidly increasing droplet temperature at the later stage, calcium might enhance the heat resistance of LAB cells, whereas proteins might lead to a mild temperature variation rate which was beneficial to cell survival. LAB cells dried in the reconstituted whole milk showed the most advanced transition of rapid viability loss, with transition temperature at around 60°C, in contrast to 65-70°C in lactose and MRS carriers and 75°C in the RSM carrier. The detrimental effects could be due to the high level of milk fat content. The proposed effects of each RSM components on LAB viability would be useful for constructing more powerful protectants for production of active dry LAB cells via spray drying., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

The direct production of macromolecular scale (sub-5 nm) porous nanocrystals with high surface area has been a considerable challenge over the past two decades. Here we report an interfacial site-directed capping agent-free growth method to directly produce porous ultrasmall (sub-5 nm), fully crystalline, macromolecular scale nanocrystals. The porous sub-5 nm Prussian blue nanocrystals exhibit uniform sizes (∼4 ± 1 nm), high surface area (∼855 m 2 g -1 ), fast electron transfer (rate constant of ∼9.73 s -1 ), and outstanding sustained catalytic activity (more than 450 days). The nanocrystal-based biointerfaces enable unprecedented sub-nanomolar level recognition of hydrogen peroxide (∼0.5 nM limit of detection). This method also paves the way towards the creation of ultrasmall porous nanocrystals for efficient biocatalysis.

The characteristics of glutelin samples from Akebia trifoliata var. australis seeds (AG) that had been deamidated by malic acid (MDAG) and by citric acid (CDAG) were investigated. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis showed high-molecular-weight subunits that were degraded into smaller fragments, and FTIR indicated a decrease in the number of β-sheet groups and an increase in the amount of β-turns in the deamidated samples. These results could be caused by the cleaving of partial disulfide bonds to form new sulfhydryl groups during deamidation. Citric acid was found to be more effective at deamidation and hydrolysis, resulting in a higher solubility and emulsifying activity for CDAG, and MDAG also exhibited some improvement in terms of surface hydrophobicity and emulsion ability. Rheology showed that the gelation point for deamidated samples was increased, and the gel network was strengthened. The amounts of essential amino acids that were well-preserved and the improved solubility, emulsification, and rheology properties of AG after acid-heating deamidation show that this technique can be useful for treating other plant-based food ingredients in the future., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Mesoporous silica nanoparticles (MSNs) that can stably load therapeutic drugs and release them in response to a specific trigger are of great interest in disease diagnosis and treatment. However, the controlled-release of gaseous drug molecules such as hydrogen sulfide (H 2 S) from a long-range and stable MSN-based system still presents a great challenge. Herein, a MSN-based glutathione (GSH)-triggered controlled-release H 2 S system has been fabricated with high entrapment efficiency (99.0 ± 0.3%) and loading content (44.2 ± 0.1%) of diallyl trisulfide (DATS). After the addition of GSH (2 mM), DATS-MSN (100 μg mL -1 ) steadily releases moderate amounts of H 2 S (peaking at the 4th hour, ∼60 μM) in phosphate buffer solution (PBS). The release of H 2 S in plasma is similar to a physiological process (peaking at the 4th hour) and the DATS-MSN remains in the plasma of a rat's system over 9 hours without significantly affecting the blood pressure, heart rate and cardiac function. Moderate quantities of nanoparticles can be taken up by cardiomyocytes in vitro, while in vivo study shows that nanoparticles mainly accumulate in the liver and spleen, affecting the H 2 S level in these organs. Furthermore, DATS-MSN shows excellent biocompatibility, as well as superior cytoprotection and an isolated heart protection effect of H 2 S under ischemic/reperfusion injury. This study provides a new insight into controlled-release applications of MSN-based H 2 S releasing systems both in vitro and in vivo.

The direct production of branched semiconductor arrays with highly ordered orientation has proven to be a considerable challenge over the last two decades. Here we report a mesoporous interfacial atomic rearrangement (MIAR) method to directly produce highly crystalline, finger-like branched iron oxide nanoarrays from the mesoporous nanopyramids. This method has excellent versatility and flexibility for heteroatom doping of metallic elements, including Sn, Bi, Mn, Fe, Co, Ni, Cu, Zn, and W, in which the mesoporous nanopyramids first absorb guest-doping molecules into the mesoporous channels and then convert the mesoporous pyramids into branching artificial nanofingers. The crystalline structure can provide more optoelectronic active sites of the nanofingers by interfacial atomic rearrangements of doping molecules and mesopore channels at the porous solid-solid interface. As a proof-of-concept, the Sn-doped Fe2O3 artificial nanofingers (ANFs) exhibit a high photocurrent density of ∼1.26 mA/cm(2), ∼5.25-fold of the pristine mesoporous Fe2O3 nanopyramid arrays. Furthermore, with surface chemical functionalization, the Sn-doped ANF biointerfaces allow nanomolar level recognition of metabolism-related biomolecules (∼5 nm for glutathione). This MIAR method suggests a new growth means of branched mesostructures, with enhanced optoelectronic applications.

Mixing surfactants with whole milk feed before spray drying could be a commercially favorable approach to produce instant whole milk powders in a single step. Pure whole milk powders obtained directly from spray drying often have a high surface fat coverage (up to 98%), rendering them less stable during storage and less wettable upon reconstitution. Dairy industries often coat these powders with lecithin, a food-grade surfactant, in a secondary fluidized-bed drying stage to produce instant powders. This study investigated the changes in wetting behavior on the surface of a whole milk particle caused by the addition of surfactants before drying. Fresh whole milk was mixed with 0.1% (wt/wt) Tween 80 or 1% (wt/wt) lecithin (total solids), and the wetting behavior of the shell formed by each sample was captured using a single-droplet drying device at intermediate drying stages as the shell was forming. The addition of surfactants improved shell wettability from the beginning of shell formation, producing more wettable milk particles after drying. The increase in surfactant loading by 10 times reduced the wetting time from around 30s to <5s. At the same loading of 1% (wt/wt; total solids), milk particles with Tween 80 were much more wettable than those with lecithin (<5s compared with >30s). We proposed that Tween 80 could adsorb at the oil-water interface of fat globules, making the surface fat more wettable, whereas lecithin tends to combine with milk proteins to form a complex, which then competes for the air-water surface with fat globules. Spray-drying experiments confirmed the greatly improved wettability of whole milk powders by the addition of either 0.1% (wt/wt) Tween 80 or 1% (wt/wt) lecithin; wetting time was reduced from 35±4s to <15s. To the best of our knowledge, this is the first time that a dynamic droplet drying system has been used to elucidate the complex interactions between ionic or nonionic surfactants and milk components (both proteins and fat), as well as the resultant effect on the development of milk particle functionality during drying., (Copyright © 2014 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.)

We developed a facile interfacial oriented growth and self-assembly process to fabricate three-dimensional (3D) aligned mesoporous iron oxide nanopyramid arrays (NPAs). The unique NPAs possess a 3D mesostructure with multiple features, including high surface area (~175 m(2)/g), large pore size (~20 nm), excellent flexibility (bent over 150 times), and scalability at the foot scale for practical applications. More importantly, these NPAs structures enable versatile enhancement of localized surface plasmon resonance and photoelectrochemical conversion. The integration of plasmonic gold with 3D NPAs remarkably improves the performance of photoelectrochemical conversion, leading to ~6- and 83-fold increases of the photocurrent under simulated solar and visible-light illumination, respectively. The fabrication and investigation of NPAs provide a new paradigm for preparing unconventional mesoporous oriented thin films and further suggest a new strategy for designing plasmonic metal/semiconductor systems for effective solar energy harvesting.

Engineered nanoparticles (ENP), which could be composed of inorganic metals, metal oxides, metalloids, organic biodegradable and inorganic biocompatible polymers, are being used as carriers for vaccine and drug delivery. There is also increasing interest in their application as delivery agents for the treatment of a variety of lung diseases. Although many studies have shown ENP can be effectively and safely used to enhance the delivery of drugs and vaccines in the periphery, there is concern that some ENP could promote inflammation, with unknown consequences for lung immune homeostasis. In this study, we review research on the effects of ENP on lung immunity, focusing on recent studies using diverse animal models of human lung disease. We summarize how the inflammatory and immune response to ENP is influenced by the diverse biophysical and chemical characteristics of the particles including composition, size and mode of delivery. We further discuss newly described unexpected beneficial properties of ENP administered into the lung, where biocompatible polystyrene or silver nanoparticles can by themselves decrease susceptibility to allergic airways inflammation. Increasing our understanding of the differential effects of diverse types of nanoparticles on pulmonary immune homeostasis, particularly previously underappreciated beneficial outcomes, supports rational ENP translation into novel therapeutics for prevention and/or treatment of inflammatory lung disorders.

In this work, a protocol to synthesize monodisperse mesoporous silica microparticles via a unique microfluidic jet spray-drying route is reported for the first time. The microparticles demonstrated highly ordered hexagonal mesostructures with surface areas ranging from ~900 up to 1500 m(2)/g and pore volumes from ~0.6 to 0.8 cm(3)/g. The particle size could be easily controlled from ~50 to 100 μm from the same diameter nozzle via changing the initial solute content, or changing the drying temperature. The ratio of the surfactant (CTAB) and silica (TEOS), and the amount of water in the precursor were found to affect the degree of ordering of mesopores by promoting either the self-assembly of the surfactant-silica micelles or the condensation of the silica as two competing processes in evaporation induced self-assembly. The drying rate and the curvature of particles also affected the self-assembly of the mesostructure. The particle mesostructure is not influenced by the inlet drying temperature in the range of 92-160 °C, with even a relatively low temperature of 92 °C producing highly ordered mesoporous microparticles. The spray-drying derived mesoporous silica microparticles, while of larger sizes and more rapidly synthesized, showed a comparable performance with the conventional mesoporous silica MCM-41 in controlled release of a dye, Rhodamine B, indicating that these spray dried microparticles could be used for the immobilisation and controlled release of small molecules., (Copyright © 2013 Elsevier Inc. All rights reserved.)

A study to compare the uptake, translocation, and distribution of selenium (Se) in soybean planted in natural seleniferous soil in Fengcheng city of China was conducted to clarify the relationship between the Se content levels of soybean proteins and their radical scavenging activity. The data showed that the total Se content in different parts of soybean plants varied with the growth periods. The selenoprotein (Se-SPI) content increased remarkably with the increase of Se content in seleniferous soils. The Se-SPI content obtained from the region with the highest Se level was almost 18 times higher than that of the control group, while antioxidant activities were about 4-fold compared to the control, suggesting that Se played a positive role in enhancing the antioxidant activity of Se-SPI. The increase in the Se level also led to changes in amino acids composition, but with nearly no effects on the subunit composition of soybean Se-SPI., (Copyright © 2013 Elsevier Ltd. All rights reserved.)