Search

In the quest for greener and more efficient energy storage solutions, the exploration and utilization of renewable raw materials is essential. In this context, cellulose-derived separators play a central role in enhancing the performance of green energy storage devices. However, these often exhibit disadvantageous porosity and limited wet strength. Here, we demonstrate a facile approach to tailor thickness (ca. 40 μm), air permeability (0.1-200 cm 3 s -1 ), and mechanical properties of separators by integration of up to 50 wt% microfibrillated cellulose (MFC) into paper sheets. While the MFC enhanced the formation of dense networks, these separators show a poor dimensional stability (folding and creasing) concomitant with a low strength under wet conditions, crucial for assembly and operation. Crosslinking with 1,2,3,4-butanetetracarboxylic acid (BTCA) however, led to an increase in wet strength by up to 6700 % while ensuring dimensional stability. The electrochemical performance, evaluated by impedance spectroscopy and galvanostatic cycling (7500 repetitions) showed comparable results as commercially available glass and polypropylene separators in terms of ion diffusion, charge-discharge rate performance, Ohmic loss and capacitance retention %. The approach demonstrates that disadvantages of paper-based separators in terms of dimensional stability and wet strength can be overcome by a paper technological approach using crosslinking strategies., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Valorization of the lignocellulosic side and waste streams is key to making industrial processes more efficient from both an economic and ecological perspective. Currently, the production of sugars from beets results in pulps in large quantities. However, there is a lack of promising opportunities for upcycling these materials despite their promising properties. Here, we investigate beet pulps from two different stages of the sugar manufacturing process as raw materials for supercapacitor electrodes. We demonstrate that these materials can be efficiently converted to activated, highly porous carbons. The carbons exhibit pore dimensions approaching the size of the desolvated K + and SO 4 2- ions with surface areas up to 2600 m 2 g -1 . These carbons were subsequently manufactured into electrodes, assembled in supercapacitors, and tested with environmentally friendly aqueous electrolytes (6 M KOH and 1 M H 2 SO 4 ). Further analysis demonstrated the presence of capacitance-enhancing functionalities, and up to 193 and 177 F g -1 in H 2 SO 4 and KOH, respectively, were achieved, which outperformed supercapacitors prepared from commercial YP80 F. Overall, our study suggests that side streams from sugar manufacturing offer a hidden potential for use in high-performance energy storage devices., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

Xylan is primarily found in the secondary cell wall of plants providing strength and integrity. To take advantage of the reinforcing effect of xylan in papermaking, it is crucial to understand its role in pulp fibers, as it undergoes substantial changes during pulping. However, the contributions of xylan that is added afterwards (extrinsic) and xylan present after pulping (intrinsic) remain largely unexplored. Here, we partially degraded xylan from refined bleached softwood kraft pulp (BSKP) and adsorbed xylan onto BSKP. Enzymatic degradation of 1 % xylan resulted in an open hand sheet structure, while adsorption of 3 % xylan created a denser fiber network. The mechanical properties improved with adsorbed xylan, but decreased more significantly after enzymatic treatment. We propose that the enhancement in mechanical properties by adsorbed extrinsic xylan is due to increased fiber-fiber bonds and sheet density, while the deterioration in mechanical properties of the enzyme treated pulp is caused by the opposite effect. These findings suggest that xylan is decisive for fiber network strength. However, intrinsic xylan is more critical, and the same properties cannot be achieved by readsorbing xylan onto the fibers. Therefore, pulping parameters should be selected to preserve intrinsic xylan within the fibers to maintain paper strength., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Activated carbon produced from biomass exhibits a high specific surface area due to the natural hierarchical porous structure of the precursor material. To reduce production costs of activated carbon, bio-waste materials receive more and more attention, which has led to a steep increase in the number of publications over the past decade. However, the characteristics of activated carbon are highly dependent on the properties of the precursor material used, making it difficult to draw assumptions about activation conditions for new precursor materials based on published work. Here, we introduce a Design of Experiment methodology with a Central Composite Design to better predict the properties of activated carbons from biomass. As a model precursor, we employ well-defined regenerated cellulose-based fibers which contain 25 wt.% chitosan as intrinsic dehydration catalyst and nitrogen donor. The use of the DoE methodology opens up the possibility to better identify the crucial dependencies between activation temperature and impregnation ratio on the yield, surface morphology, porosity and chemical composition of the activated carbon, independent of the used biomass. The use of DoE yields contour plots, which allows for more facile analysis on correlations between activation conditions and activated carbon properties, thus enabling its tailor-made manufacturing., (© 2023. The Author(s).)

Coffee, as one of the most traded resources, generates a vast amount of biogenic by-products. Coffee silver skins (CSS), a side stream from the roasting process, account for about 4 wt.%. Despite the abundancy of CSS, possible routes to generate added value for broad applications are limited. Herein, we present an approach to use CSS as a precursor material for supercapacitor electrodes. KOH activated carbon (AC) was produced from CSS. The resulting AC-CSS was characterized by X-ray diffraction, gas sorption analysis, scanning electron microscopy, and Raman spectroscopy. The highly porous AC-CSS exposes a specific surface area of more than 2500 m 2 g -1 . Electrodes formed with AC-CSS were electrochemically characterized by performing cyclic voltammetry and galvanostatic cycling. The electrodes were further assembled into a supercapacitor device and operated using 1 M sulfuric acid as electrolyte. In addition, various quinones were added to the electrolyte and their impact on the capacitance of AC-CSS electrodes was analyzed. In this work, we were able to show that CSS are a valuable source for supercapacitor applications and that coffee-waste-derived quinones can act as capacitance enhancers. Thus, the findings of this research show a valuable path towards sustainable and green energy storage solutions.

One main challenge to utilize cellulose-based fibers as the precursor for carbon fibers is their inherently low carbon yield. This study aims to evaluate the use of keratin in chicken feathers, a byproduct of the poultry industry generated in large quantities, as a natural charring agent to improve the yield of cellulose-derived carbon fibers. Keratin-cellulose composite fibers are prepared through direct dissolution of the pulp and feather keratin in the ionic liquid 1,5-diazabicyclo[4.3.0]non-5-enium acetate ([DBNH]OAc) and subsequent dry jet wet spinning (so-called Ioncell process). Thermogravimetric analysis reveals that there is an increase in the carbon yield by ∼53 wt % with 30 wt % keratin incorporation. This increase is comparable to the one observed for lignin-cellulose composite fibers, in which lignin acts as a carbon booster due to its higher carbon content. Keratin, however, reduces the mechanical properties of cellulose precursor fibers to a lesser extent than lignin. Keratin introduces nitrogen and induces the formation of pores in the precursor fibers and the resulting carbon fibers. Carbon materials derived from the keratin-cellulose composite fiber show potential for applications where nitrogen doping and pores or voids in the carbon are desirable, for example, for low-cost bio-based carbons for energy harvest or storage., Competing Interests: The authors declare no competing financial interest., (© 2022 The Authors. Published by American Chemical Society.)

The increasing amount of electric vehicles on our streets as well as the need to store surplus energy from renewable sources such as wind, solar and tidal parks, has brought small and large scale batteries into the focus of academic and industrial research. While there has been huge progress in performance and cost reduction in the past years, batteries and their components still face several environmental issues including safety, toxicity, recycling and sustainability. In this review, we address these challenges by showcasing the potential of polysaccharide-based compounds and materials used in batteries. This particularly involves their use as electrode binders, separators and gel/solid polymer electrolytes. The review contains a historical section on the different battery technologies, considerations about safety on batteries and requirements of polysaccharide components to be used in different types of battery technologies. The last sections cover opportunities for polysaccharides as well as obstacles that prevent their wider use in battery industry., (Copyright © 2021 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Euthanasia of companion animals in veterinary emergency medicine is a common cause of death. Euthanasia is economic when it is the consequence of the pet owner's inability to afford essential treatment while a viable medical alternative to euthanasia exists. Gastric dilatation-volvulus (GDV) is an acute life-threatening emergency condition of dogs; if left untreated, rapid death is highly likely. Surgical treatment leads to survival of around 80-90% of dogs; however, such treatment is costly. Therefore, pre-surgical euthanasia may be largely economically motivated. Having pet insurance, a financial instrument to reduce the burden of unforeseen veterinary medical costs on pet owners, would be expected to abolish the risk for pre-surgical economic euthanasia. We therefore aimed to determine whether pet insurance attenuates the risk of pre-surgical economic euthanasia in dogs with GDV. Non-referred dogs ( n = 260) with GDV and known insurance status seen at 24 emergency clinics over a 2-year period were included. Relevant data (e.g., insurance status, age, comorbidities, outcome) were retrospectively extracted from a pet insurer's claim records (insured animals) or from electronic medical records of participating hospitals (non-insured animals). Forty-one percent of dogs (106 of 260 dogs) did not survive to hospital discharge; 82 (77%) of non-survivors died before surgery, all through euthanasia. The pre-surgical euthanasia rate was 10% in insured and 37% in non-insured dogs ( p < 0.001). When adjusted for the effect of age, deposit size, comorbidities, and blood lactate concentration, the absence of insurance increased the odds of pre-surgical euthanasia by a factor of 7.4 (95% CI 2.0 to 37; p = 0.002). Of dogs undergoing surgery, 86% survived to hospital discharge. Overall, 80% of insured animals and 53% of non-insured animals survived to hospital discharge ( p < 0.001). Thus, insurance was associated with a marked decrease in risk of pre-surgical euthanasia indicating that the cause of pre-surgical euthanasia of dogs with GDV is predominantly economic in nature. The rate of pre-surgical euthanasia in dogs with GDV may emerge as a suitable marker to quantify economic decision making of pet owners and to measure the impact of financial interventions aimed at mitigating economic duress associated with cost of veterinary emergency care., Competing Interests: MA and JS were employed by the company PetSure, an Australian pet insurance provider. The remaining authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2020 Boller, Nemanic, Anthonisz, Awad, Selinger, Boller and Stevenson.)

The optimization of the thermal treatment of cationic starch in the paper industry offers the opportunity to reduce the energy consumption of this process . Four different industrially relevant cationic starches, varying in source, cationization method and degree of substitution were treated by a steam-jet cooking procedure, comparable to industrially employed starch cooking processes. The influence of the starch properties and cooking parameters on the adsorption behavior of the starches on cellulosic pulp was investigated. The adsorbed amount was affected by the cooking temperature and the type of starch. For some starch grades, a cooking temperature of 115 °C can be employed to achieve sufficient starch retention on the pulp fibers. The energy consumption could further be reduced by cooking at higher starch concentrations without loss of adsorption efficiency., Competing Interests: The authors declare no conflict of interest.

Knowledge of the most common presenting complaints and diagnoses in companion animals is valuable in preparing veterinary students and veterinarians to manage the most frequently observed conditions in clinical practice. Pet insurance databases provide access to large sample populations and have been previously used to describe disease incidence in companion animals. The aim of this study was to determine the incidence of presenting complaints and diagnoses in insured Australian dogs through the use of a pet insurance database. Analysis of a de-identified dataset containing pet insurance claims associated with presenting complaints and diagnoses from 488,472 insured Australian dogs insured in the years 2016 and 2017, was performed. Annual incidence rates of presenting complaints and diagnoses were calculated and expressed as, number of events per 1,000 dog years at risk. The presenting complaints with the highest incidence were vomiting (14.21 events per 1,000 dog years at risk in 2016, 15.80 events per 1,000 dog years at risk in 2017) and pruritus (8.79 events per 1,000 dog years at risk in 2016, 10.30 events per 1,000 dog years at risk in 2017). Presenting complaints affecting the gastrointestinal system were the most common (19.20 events per 1,000 dog years at risk in 2016, 20.77 events per 1,000 dog years at risk in 2017). The diagnoses with the highest incidence were otitis externa (34.12 events per 1,000 dog years at risk in 2016, 34.82 events per 1,000 dog years at risk in 2017) and dermatitis (28.05 events per 1,000 dog years at risk in 2016, 29.99 events per 1,000 dog years at risk in 2017). Diagnoses affecting the integument were the most common (216.56 events per 1,000 dog years at risk in 2016, 219.06 events per 1,000 dog years at risk in 2017). The results from this study can aid in the design of relevant veterinary curricula and may be helpful in prioritising research on common clinical conditions., (© 2020 Australian Veterinary Association.)

Antimicrobial use in veterinary practice is under increasing scrutiny as a contributor to the rising risk of multidrug resistant bacterial pathogens. Surveillance of antimicrobial use in food animals is extensive globally, but population level data is lacking for companion animals. Lack of census data means cohorts are usually restricted to those attending veterinary practices, which precludes aggregating data from large cohorts of animals, independent of their need for veterinary intervention. The objective of this study was to investigate the exposure of dogs and cats to antimicrobials at a population level. A retrospective cohort study was performed using a novel data source; a pet insurance database. The rate of antimicrobial prescribing, and the rate of prescribing of critically important antimicrobials, was measured in a large population of dogs (813,172 dog-years) and cats (129,232 cat-years) from 2013 - 2017. The incidence rate of antimicrobial prescribing was 5.8 prescriptions per 10 dog years (95% CI 5.8-5.9 per 10 dog years) and 3.1 prescriptions per 10 cat years (95% CI 3.1-3.2 per 10 cat years). Critically important antimicrobials accounted for 8% of all the antimicrobials prescribed over the 4-year study. Cats were 4.8-fold more likely than dogs to be prescribed 3rd-generation cephalosporins. The level of antimicrobial exposure in dogs and cats was less than half that for the coincident human community. Data such as this provides a unique opportunity to monitor antimicrobial prescribing in veterinary medicine, which is a critical component of optimal antimicrobial stewardship., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Meningeal tuberculosis is rare in the developed world, with only 92 cases of meningeal TB reported in the United States in 2014 according to the CDC (CDC, 2015). We describe the case of a 39-year-old male with a history of alcohol abuse, whose cerebral spinal fluid acid fast smears confirmed TB only weeks after his death. His only initial presenting symptom was headache, and his condition declined rapidly during his hospitalization.

The nematic twist-bend (TB) phase, exhibited by certain achiral thermotropic liquid crystalline (LC) dimers, features a nanometer-scale, heliconical rotation of the average molecular long axis (director) with equally probable left- and right-handed domains. On meso to macroscopic scales, the TB phase may be considered as a stack of equivalent slabs or "pseudo-layers", each one helical pitch in thickness. The long wavelength fluctuation modes should then be analogous to those of a smectic-A phase, and in particular the hydrodynamic mode combining "layer" compression and bending ought to be characterized by an effective layer compression elastic constant B eff and average director splay constant K. The magnitude of K is expected to be similar to the splay constant of an ordinary nematic LC, but due to the absence of a true mass density wave, B eff could differ substantially from the typical value of ∼10 6 Pa in a conventional smectic-A. Here we report the results of a dynamic light scattering study, which confirms the "pseudo-layer" structure of the TB phase with B eff in the range 10 3 -10 4 Pa. We show additionally that the temperature dependence of B eff at the TB to nematic transition is accurately described by a coarse-grained free energy density, which is based on a Landau-deGennes expansion in terms of a heli-polar order parameter that characterizes the TB state and is linearly coupled to bend distortion of the director.

The nematic twist-bend (NTB) phase, exhibited by certain thermotropic liquid crystalline (LC) dimers, represents a new orientationally ordered mesophase - the first distinct nematic variant discovered in many years. The NTB phase is distinguished by a heliconical winding of the average molecular long axis (director) with a remarkably short (nanoscale) pitch and, in systems of achiral dimers, with an equal probability to form right- and left-handed domains. The NTB structure thus provides another fascinating example of spontaneous chiral symmetry breaking in nature. The order parameter driving the formation of the heliconical state has been theoretically conjectured to be a polarization field, deriving from the bent conformation of the dimers, that rotates helically with the same nanoscale pitch as the director field. It therefore presents a significant challenge for experimental detection. Here we report a second harmonic light scattering (SHLS) study on two achiral, NTB-forming LCs, which is sensitive to the polarization field due to micron-scale distortion of the helical structure associated with naturally-occurring textural defects. These defects are parabolic focal conics of smectic-like "pseudo-layers", defined by planes of equivalent phase in a coarse-grained description of the NTB state. Our SHLS data are explained by a coarse-grained free energy density that combines a Landau-deGennes expansion of the polarization field, the elastic energy of a nematic, and a linear coupling between the two.

Wildlife biologists often use grid-based designs to sample animals and generate abundance estimates. Although sampling in grids is theoretically sound, in application, the method can be logistically difficult and expensive when sampling elusive species inhabiting extensive areas. These factors make it challenging to sample animals and meet the statistical assumption of all individuals having an equal probability of capture. Violating this assumption biases results. Does an alternative exist? Perhaps by sampling only where resources attract animals (i.e., targeted sampling), it would provide accurate abundance estimates more efficiently and affordably. However, biases from this approach would also arise if individuals have an unequal probability of capture, especially if some failed to visit the sampling area. Since most biological programs are resource limited, and acquiring abundance data drives many conservation and management applications, it becomes imperative to identify economical and informative sampling designs. Therefore, we evaluated abundance estimates generated from grid and targeted sampling designs using simulations based on geographic positioning system (GPS) data from 42 Alaskan brown bears (Ursus arctos). Migratory salmon drew brown bears from the wider landscape, concentrating them at anadromous streams. This provided a scenario for testing the targeted approach. Grid and targeted sampling varied by trap amount, location (traps placed randomly, systematically or by expert opinion), and traps stationary or moved between capture sessions. We began by identifying when to sample, and if bears had equal probability of capture. We compared abundance estimates against seven criteria: bias, precision, accuracy, effort, plus encounter rates, and probabilities of capture and recapture. One grid (49 km(2) cells) and one targeted configuration provided the most accurate results. Both placed traps by expert opinion and moved traps between capture sessions, which raised capture probabilities. The grid design was least biased (-10.5%), but imprecise (CV 21.2%), and used most effort (16,100 trap-nights). The targeted configuration was more biased (-17.3%), but most precise (CV 12.3%), with least effort (7,000 trap-nights). Targeted sampling generated encounter rates four times higher, and capture and recapture probabilities 11% and 60% higher than grid sampling, in a sampling frame 88% smaller. Bears had unequal probability of capture with both sampling designs, partly because some bears never had traps available to sample them. Hence, grid and targeted sampling generated abundance indices, not estimates. Overall, targeted sampling provided the most accurate and affordable design to index abundance. Targeted sampling may offer an alternative method to index the abundance of other species inhabiting expansive and inaccessible landscapes elsewhere, provided their attraction to resource concentrations.

Patients with borderline personality disorder (BPD) suffer from affective instability, impulsivity, and identity disturbance which particularly manifest in an unstable or insecure self-image. One main problem for studies of core psychopathology in BPD is the complex subject of identity disturbance and self-image. The purpose of this study was to investigate the self-image of BPD patients with a qualitative research approach. Twelve patients with BPD were compared to 12 patients with remitted major depressive disorder (MDD) without personality disorder, using the Structured Interview of Personality Organization (STIPO). The transcribed interviews were analyzed using a combination of content analysis and grounded theory. BPD patients described themselves predominantly as helpful and sensitive; reported typical emotions were sadness, anger, and anxiety. MDD patients on the other hand reported numerous and various characteristics and emotions, including happiness, as well as sadness and anxiety. Other persons were characterized by the BPD group as egoistic and satisfied, while the MDD group described others as being balanced and secretive. BPD patients displayed an altruistic, superficial, and suffering self-image. Aggressive tendencies were only seen in other persons. Our findings support the concept of a self and relationship disturbance in BPD which is highly relevant for psychotherapy treatment.

Background: Patients with borderline personality disorder (BPD) suffer from instability of their relationships, their affectivity and their identity. The purpose of the study was to investigate negative affects and identity disturbance in patients with BPD and in patients without personality disorder using questionnaire data and interview data., Sampling and Methods: Twelve patients with BPD and 12 patients with major depressive disorder without any personality disorder were assessed with the Structured Interview of Personality Organization (STIPO) and questionnaires (Inventory of Personality Organization, Beck Depression Inventory, State-Trait Anxiety Inventory). They were compared with respect to the frequency of negative affective verbal expressions using computerized content analysis methods., Results: BPD patients showed higher levels of anxiety, depression and identity diffusion in the questionnaires than major depressive disorder patients without personality disorder. However, they did not report more negative affective expressions in the interview. Patients with identity disturbance of both groups showed higher values of negative mood in the questionnaires, but less anger, less anxiety and less affective intensity in the interview., Conclusion: The preliminary findings indicate that patients with identity disturbance show high levels of negative affects in questionnaires but only few negative affects in the interview situation. More studies are needed to enhance the understanding of negative affects and identity disturbance in BPD., (Copyright 2009 S. Karger AG, Basel.)

Langmuir monolayers of chiral liquid crystals on the surface of water exhibit orientational waves with complex spatiotemporal patterns. These patterns arise from a collective precession of the mesogenic molecules, driven by the evaporation of water through the monolayer. We investigate the behavior of these orientational waves around topological defects in the molecular orientation. Through Brewster angle microscopy, we find that the waves form a reversing spiral pattern, which rotates about the central vortex. With increasing relative humidity, the rotation slows and then stops. We model the system theoretically, and show that predicted patterns are in good agreement with the experiments.

When an ultrasonic wave is applied to a nematic liquid-crystal cell, the molecules change their orientation, leading to a change in the optical intensity transmitted through the cell. Modeling this acousto-optic effect involves three separate theoretical issues: (a) calculating the intensity of sound transmitted through the cell walls into the liquid crystal, (b) determining the consequent realignment of the liquid crystal, and (c) deriving the change in optical transmission through the cell. In this paper, we present a theory that addresses all three of these issues, and thereby reproduces the behavior seen in experiments. The theory shows how the performance depends not only on the liquid-crystal material properties, but also on the geometrical parameters of the system, such as the thickness of the glass walls, thickness of the liquid-crystal layer, angle of the ultrasonic wave, viewing angle, and boundary condition at the glass-liquid crystal interface. The theory predicts that the strong dependence on viewing angle still allows an optical image to be seen for realistic dimensions.

In a nematic liquid-crystal cell, the molecules can be realigned by an ultrasonic wave, leading to a change in the optical transmission through the cell. We present a model for this acousto-optic effect, and show that the magnitude of this effect is controlled by a director-density coupling. We then measure the optical transmission as a function of acoustic intensity for three liquid-crystal materials, and confirm that the data fit the functional form of the theoretical prediction. This fit gives the value of the director-density coupling, which varies greatly from material to material.

An unresolved issue in the theory of liquid crystals is the molecular basis of the electroclinic effect in the smectic-A phase. Recent x-ray scattering experiments suggest that, in a class of siloxane-containing liquid crystals, an electric field changes a state of disordered molecular tilt in random directions into a state of ordered tilt in one direction. To investigate this issue, we measure the optical tilt and birefringence of these liquid crystals as functions of field and temperature, and we develop a theory for the distribution of molecular orientations under a field. A comparison of theory and experiment confirms that these materials have a disordered distribution of molecular tilt directions that is aligned by an electric field, giving a large electroclinic effect. It also shows that the effective dipole moment, a key parameter in the theory, scales as a power law near the smectic-A--smectic-C transition.

Using Monte Carlo simulation methods, we explore the role of molecular shape in the phase behavior of liquid crystals and the electroclinic effect. We study a "bent-rod" mesogen shaped like the letter Z, composed of seven soft spheres bonded rigidly together with no intramolecular degrees of freedom. For strongly angled molecules, we find that steric repulsion alone provides the driving force for a smectic-C phase, even without intermolecular dipole-dipole interactions. For weakly angled (nearly rodlike) molecules, we find a stable smectic-A (SmA) phase and a strong electroclinic effect with a saturation tilt angle of about 19 degrees. In the SmA phase we find evidence of vortexlike point defects. We also observe a field-induced nematic-smectic phase transition.

We present a theory for cooperative chiral order in the transition between right-handed B-DNA and left-handed Z-DNA. This theory, based on the random-field Ising model, predicts the characteristic length scale of Z-DNA segments. This length scale depends on whether the DNA is a homopolymer or a random sequence: it is approximately 4000 nucleotides in a homopolymer but only approximately 25 nucleotides in a random sequence. These theoretical results are consistent with experiments on DNA homopolymers and random sequences.

We report on spectroscopic studies of the chiral structure in phospholipid tubules formed in mixtures of alcohol and water. Synthetic phospholipids containing diacetylenic moieties in the acyl chains self-assemble into hollow, cylindrical tubules in appropriate conditions. Circular dichroism provides a direct measure of chirality of the molecular structure. We find that the CD spectra of tubules formed in mixtures of alcohol and water depends strongly on the alcohol used and the lipid concentration. The relative spectral intensity of different circular dichroism bands correlates with the number of bilayers observed using microscopy. The results provide experimental evidence that tubule formation is based on chiral packing of the lipid molecules and that interbilayer interactions are important to the tubule structure.

Molecular self-assembly is of key importance for the rational design of advanced materials. To investigate the causal relation between molecular structure and the consequent self-assembled microstructure, self-assembled tubules of diacetylenic lipids were studied. Circular-dichroism studies give experimental evidence that the formation of tubules is driven by chiral molecular packing, in agreement with recent theories of tubules. On the basis of these results, a molecular mechanism for the formation of tubules is proposed.