Search

High mobility of twin boundaries in modulated martensites of Ni-Mn-Ga-based ferromagnetic shape memory alloys holds a promise for unique magnetomechanical applications. This feature has not been fully understood so far, and in particular, it has yet not been unveiled what makes the lattice mechanics of modulated Ni-Mn-Ga specifically different from other martensitic alloys. Here, results of dedicated laser-ultrasonic measurements on hierarchically twinned five-layer modulated (10M) crystals fill this gap. Using a combination of transient grating spectroscopy and laser-based resonant ultrasound spectroscopy, it is confirmed that there is a shear elastic instability in the lattice, being significantly stronger than in any other martensitic material and also than what the first-principles calculations for Ni-Mn-Ga predict. The experimental results reveal that the instability is directly related to the lattice modulations. A lattice-scale mechanism of dynamic faulting of the modulation sequence that explains this behavior is proposed; this mechanism can explain the extraordinary mobility of twin boundaries in 10M., (© 2024 The Author(s). Advanced Materials published by Wiley‐VCH GmbH.)

Despite the fundamental and technological importance of the elastic constants, a suitable method for their full characterization in epitaxial films is missing. Here we show that transient grating spectroscopy (TGS) with highly k-vector-selective generation and detection of acoustic waves is capable of determination of all independent elastic coefficients of an epitaxial thin film grown on a single-crystalline substrate. This experimental setup enables detection of various types of guided acoustic waves and evaluation of the directional dependence of their speeds of propagation. For the studied model system, which is a 3μm thin epitaxial film of the NiTi shape memory alloy on an MgO substrate, the TGS angular maps include Rayleigh-type surface acoustic waves as well as Sezawa-type and Love-type modes, delivering rich information on the elastic response of the film under different straining modes. The resulting inverse problem, which means the calculation of the elastic constants from the TGS maps, is subsequently solved using the Ritz-Rayleigh numerical method. Using this approach, tetragonal elastic constants of the NiTi film and their changes with the austenite→martensite phase transition are analyzed., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

The Colorado potato beetle (CPB, Leptinotarsa decemlineata Slechtd.) is an invasive pest with economic importance worldwide. Sex ratios during egg-hatching and a frequency of polyandry in single-female families were analysed to clarify the reproduction strategy of CPB, which was still known only in fragments. 1296 just hatching 1st instar CPB larvae were collected from 19 single-female families, of which 13 were random families collected from potato fields and 6 were families produced by laboratory farming of naturally fertilised females. All larvae were analysed to detect a sex using a qPCR-based method and to detect polymorphisms in genotypes of 9 microsatellite (SSR) markers. The bias in sex ratio in favour of females was confirmed using linear mixed-effects model in both experimental groups of families: field collections (F = 36.39; P = 0.0001) and laboratory farming (F = 13.74; P = 0.0139). The analysis of diversity in microsatellites proved the polyandry in all progenies as 73% of analysed segregation patterns did not match with the patterns expected for full-sib progenies; on average per locus, 46% of allelic and 49.7% of genotype ratios showed irregular segregation. Both findings contribute toward understanding CPB success rate as an invasive species, as the preferential bearing of females with polyandry has a great potential to keep fitness of progenies, to maintain and operate population diversity, and to accelerate the reproduction of the pest., (© 2022. The Author(s).)

The demand for biomaterials has been increasing along with the increase in the population of elderly people worldwide. The mechanical properties and high wear resistance of metallic biomaterials make them well-suited for use as substitutes or as support for damaged hard tissues. However, unless these biomaterials also have a low Young's modulus similar to that of human bones, bone atrophy inevitably occurs. Because a low Young's modulus is typically associated with poor wear resistance, it is difficult to realize a low Young's modulus and high wear resistance simultaneously. Also, the superelastic property of shape-memory alloys makes them suitable for biomedical applications, like vascular stents and guide wires. However, due to the low recoverable strain of conventional biocompatible shape-memory alloys, the demand for a new alloy system is high. The novel body-centered-cubic cobalt-chromium-based alloys in this work provide a solution to both of these problems. The Young's modulus of <001>-oriented single-crystal cobalt-chromium-based alloys is 10-30 GPa, which is similar to that of human bone, and they also demonstrate high wear and corrosion resistance. They also exhibit superelasticity with a huge recoverable strain up to 17.0%. For these reasons, the novel cobalt-chromium-based alloys can be promising candidates for biomedical applications., (© 2022 The Authors. Advanced Materials published by Wiley-VCH GmbH.)

The identification of sex in larvae of insects is usually challenging or even impossible, while in adults the sexual dimorphism is usually evident. Here, we used copy number analysis to develop a method of sex detection in Colorado potato beetle (Leptinotarsa decemlineata), which has an X0 sex determination system. The X linked gene LdVssc and autosomal gene LdUBE3B were identified as appropriate target and reference loci, respectively. The copy numbers (CNV) of LdVssc in males and females were estimated using standard droplet digital PCR (ddPCR) and real-time PCR (qPCR). With both methods, CNVs were bimodally distributed (BA ddPCR  = 0.709 and BA qPCR  = 0.683) with 100% ability to distinguish females from males. The use of qPCR-based sex detection in a broad collection of 448 random CPB adults showed a perfect association (Phi = 1.0, p < 0.05) with the true sexes of adults, with mean CNV in females of 2.032 (SD = 0.227) and 0.989 in males (SD = 0.147). In the collection of 50 random 4th instar larvae, 27 females and 23 males were identified, consistent with the expected 1:1 sex ratio (p = 0.689). The method is suitable for sexing in all stages of ontogenesis. The optimal cost-effective application of the method in large populations requires the DNA extraction using CTAB, the qPCR assay in one biological replicate and three technical replicates of each marker, and the use of one randomly chosen male per run to calibrate calculation of CNV., (© 2022. The Author(s).)

Somatic hybridization has been frequently used to overcome sexual incompatibility between potato and its secondary germplasm. The primary objective of this study was to produce and evaluate somatic hybrids of Solanum tuberosum (Stub) and S. bulbocastanum (Sblb) for breeding purposes. In 2007, 23 somatic hybrids were produced using an electrofusion of mesophyll protoplasts of diploid (2n = 2x = 24) potato line StubDH165 and S. bulbocastanum PI24351 (Sblb66). Phenotype of somatic hybrids in field conditions were evaluated, together with constitution and stability of 30 nuclear (ncSSR) and 27 cytoplasmic (cpSSR) microsatellite markers and content of main glycoalkaloids. All somatic hybrids had very high field resistance against late blight, but the plants were infertile: the viability of pollen grains insignificantly varied between 0.58 and 8.97%. A significant somaclonal variation was observed in terms of the morphology of plants, the date of emergence, the quantity of harvested tubers, the content of glycoalkaloids in foliage, and nuclear microsatellite markers (ncSSR). The analysis of ncSSR identified five distinct genotypes of hybrids partly associated with phenotype variations. The process of somatic hybridization with regeneration of shoots was identified as the most likely source of somaclonal variation because the ncSSR genotypes of hybrids, which were maintained in vitro, remained stable for more than 10 years. The infertile somatic hybrids have no practical breeding potential, but they are considered very suitable for advanced studies of the differential expression of genes in the pathways linked to dormancy of tubers and synthesis of glycoalkaloids., (© 2022. The Author(s).)

Although spatial and temporal variation are both important components structuring microbial communities, the exact quantification of temporal turnover rates of fungi and bacteria has not been performed to date. In this study, we utilised repeated resampling of bacterial and fungal communities at specific locations across multiple years to describe their patterns and rates of temporal turnover. Our results show that microbial communities undergo temporal change at a rate of 0.010-0.025 per year (in units of Sorensen similarity), and the change in soil is slightly faster in fungi than in bacteria, with bacterial communities changing more rapidly in litter than soil. Importantly, temporal development differs across fungal guilds and bacterial phyla with different ecologies. While some microbial guilds show consistent responses across regional locations, others show site-specific development with weak general patterns. These results indicate that guild-level resolution is important for understanding microbial community assembly, dynamics and responses to environmental factors., (© 2021 John Wiley & Sons Ltd.)

The paper specifies the electrostatic spinning process of specific polymeric materials, such as polyvinylidene fluoride (PVDF), polyamide-6 (PA6, Nylon-6) and their combination PVDF/PA6. By combining nanofibers from two different materials during the spinning process, new structures with different mechanical, chemical, and physical properties can be created. The materials and their combinations were subjected to several measurements: scanning electron microscopy (SEM) to capture topography; contact angle of the liquid wettability on the sample surface to observe hydrophobicity and hydrophilicity; crystallization events were determined by differential scanning calorimetry (DSC); X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and Fourier-transform infrared spectroscopy (FT-IR) to describe properties and their changes at the chemical level. Furthermore, for the electrical properties of the sample, the dielectric characteristics and the piezoelectric coefficient were measured. The advantage of the addition of co-polymers was to control the properties of PVDF samples and understand the reasons for the changed functionality. The innovation point of this work is the complex analysis of PVDF modification caused by mixing with nylon PA6. Here we emphasize that the application of nylon during the spin influences the properties and structure (polarization, crystallization) of PVDF.

The method of inclusion of various additives into a polymer depends highly on the material in question and the desired effect. In the case of this paper, nitride salts were introduced into polyvinylidene fluoride fibers prepared by electrospinning. The resulting changes in the structural, chemical and electrical properties of the samples were observed and compared using SEM-EDX, DSC, XPS, FTIR, Raman spectroscopy and electrical measurements. The observed results displayed a grouping of parameters by electronegativity and possibly the molecular mass of the additive salts. We virtually demonstrated elimination of the presence of the γ-phase by addition of Mg(NO 3 ) 2 , Ca(NO 3 ) 2 , and Zn(NO 3 ) 2 salts. The trend of electrical properties to follow the electronegativity of the nitrate salt cation is demonstrated. The performed measurements of nitrate salt inclusions into PVDF offer a new insight into effects of previously unstudied structures of PVDF composites, opening new potential possibilities of crystalline phase control of the composite and use in further research and component design.

Modern material science often makes use of polyvinylidene fluoride thin films because of various properties, like a high thermal and chemical stability, or a ferroelectric, pyroelectric and piezoelectric activity. Fibers of this polymer material are, on the other hand, much less explored due to various issues presented by the fibrous form. By introducing carbon nanotubes via electrospinning, it is possible to affect the chemical and electrical properties of the resulting composite. In the case of this paper, the focus was on the further improvement of interesting polyvinylidene fluoride properties by incorporating carbon nanotubes, such as changing the concentration of crystalline phases and the resulting increase of the dielectric constant and conductivity. These changes in properties have been explored by several methods that focused on a structural, chemical and electrical point of view. The resulting obtained data have been documented to create a basis for further research and to increase the overall understanding of the properties and usability of polyvinylidene fluoride fiber composites.

An electrochemical amperometric ethylene sensor with solid polymer electrolyte (SPE) and semi-planar three electrode topology involving a working, pseudoreference, and counter electrode is presented. The polymer electrolyte is based on the ionic liquid 1-butyl 3-methylimidazolium bis(trifluoromethylsulfonyl)imide [BMIM][NTf 2 ] immobilized in a poly(vinylidene fluoride) matrix. An innovative aerosol-jet printing technique was used to deposit the gold working electrode (WE) on the solid polymer electrolyte layer to make a unique electrochemical active SPE/WE interface. The analyte, gaseous ethylene, was detected by oxidation at 800 mV vs. the platinum pseudoreference electrode. The sensor parameters such as sensitivity, response/recovery time, repeatability, hysteresis, and limits of detection and quantification were determined and their relation to the morphology and microstructure of the SPE/WE interface examined. The use of additive printing techniques for sensor preparation demonstrates the potential of polymer electrolytes with respect to the mass production of printed electrochemical gas sensors.

Resonant ultrasound spectroscopy was utilized to determine the mechanical properties of a planar interface between a cold-sprayed iron deposit and an aluminum alloy substrate. The measurements were done at room temperature and with a thermal cycle from room temperature to 500 °C. The properties of the interface were assessed by analyzing the resonant frequencies of a sandwich-like sample by means of a numerical model. While the as-sprayed deposit at the room temperature exhibited a perfect adhesion to the substrate, the thermal cycle led to deterioration of the properties due to precipitation of FeAl 3 along the interface and subsequent cracking. The modal analysis enabled localization of the damage zone along the interfaces and simulating its temperature evolution during the cooling run., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Analyte flow influences the performance of every gas sensor; thus, most of these sensors usually contain a diffusion barrier (layer, cover, inlet) that can prevent the negative impact of a sudden change of direction and/or the rate of analyte flow, as well as various unwanted impacts from the surrounding environment. However, several measurement techniques use the modulation of the flow rate to enhance sensor properties or to extract more information about the chemical processes that occur on a sensitive layer or a working electrode. The paper deals with the experimental study on how the analyte flow rate and the orientation of the electrochemical sensor towards the analyte flow direction influence sensor performance and current fluctuations. Experiments were carried out on a semi-planar, three-electrode topology that enabled a direct exposure of the working (sensing) electrode to the analyte without any artificial diffusion barrier. The sensor was tested within the flow rate range of 0.1-1 L/min and the orientation of the sensor towards the analyte flow direction was gradually set to the four angles 0°, 45°, 90° and 270° in the middle of the test chamber, while the sensor was also investigated in the standard position at the bottom of the chamber., Competing Interests: The authors declare no conflict of interest.

Butterfly wings have complex structure lending it several interesting properties. Coloration of the wing is one of the first things to encounter and the overall visual effect is in fact influenced by several factors. Chemical pigments set the base color of the wing, topographical structures on the wing scales cause color shift by interference and their arrangement into diffraction grating causes iridescence. The thin film interference can be attributed to microscopic ridges covering wing scales. Observation and calculation of the color shift on wings of Euploea mulciber species using Fourier transform of images obtained by atomic force microscopy is the focus of this article., (© 2019 Wiley Periodicals, Inc.)

The transmission of longitudinal ultrasonic waves through periodic ceramic microlattices fabricated by Robocasting was measured in the 2-12MHz frequency range. It was observed that these structures (scaffolds of tetragonal and hexagonal spatial arrangements with periodicity at length-scales of ∼100μm) exhibit well-detectable acoustic band structures with bandgaps. The locations of these gaps at relatively high frequencies were shown to be in close agreement with the predictions of numerical models, especially for tetragonal scaffolds. For hexagonal scaffolds, a mixing between longitudinal and shear polarizations of the propagation modes was observed in the model, which blurred the matching of the calculated band structures with the experimentally measured bandgaps., (Copyright © 2017 Elsevier B.V. All rights reserved.)

The influence of a polycrystals' grain structure on elastic wave scattering is studied with analytical and numerical methods in a broad frequency range. A semi-analytical attenuation model, based on an established scattering theory, is presented. This technique accurately accounts for the grain morphology without prior assumptions on grain statistics. This is achieved by incorporating a samples' exact spatial two-point correlation function into the theory. The approach is verified by using a finite element method (FEM) to simulate P-wave propagation in 3D Voronoi crystals with equal mean grain diameter, but different grain shape uniformity. Aluminum and Inconel serve as representatives for weak and strong scattering cubic class materials for simulations and analytical calculations. It was found that the shape of the grains has a strong influence on the attenuation curve progression in the Rayleigh-stochastic transition region, which was attributed to mode conversion scattering. Comparisons between simulations and theory show excellent agreement for both materials. This demonstrates the need for accurately taking the microstructure of heterogeneous materials into account, to get precise analytical predictions for their scattering behaviour. It also demonstrates the impressive accuracy and flexibility of the scattering theory which was used.

We show that the Ritz-Rayleigh method can be used for calculation of velocity of surface acoustic waves (SAWs) propagating in a general direction of an anisotropic medium of arbitrary symmetry class. The main advantage of this method is that expanding the displacement field of SAW into a fixed functional basis transforms the calculation of SAW velocities into a simple linear eigenvalue problem. The correctness and reliability of the proposed approach are verified on experimental SAW data obtained for generally oriented planes of an indium phosphide single crystal. The same experimental datasets are then used to discuss the invertibility of the method, i.e. the possibility of determination of elastic coefficients from SAW measurements in general directions. It is shown that the SAW data obtained on a single generally oriented plane are sufficient for such an inverse calculation for a cubic material only if they are complemented by measurements of velocities of bulk quasi-longitudinal (qL) waves propagating along the same free surface. Moreover, when the SAW and qL data are available from three almost perpendicular faces of a single specimen, the complete elastic tensor (21 independent constants) can be inversely determined, without considering a priori any symmetry constraints to the material., (Copyright © 2014 Elsevier B.V. All rights reserved.)

The evolution of elastic properties with temperature and magnetic field was studied in two differently heat-treated single crystals of the Ni-Mn-Ga magnetic shape memory alloy using resonant ultrasound spectroscopy. Quenching and slow furnace cooling were used to obtain different densities of antiphase boundaries. We found that the crystals exhibited pronounced differences in the c' elastic coefficient and related shear damping in high-temperature ferromagnetic phases (austenite and premartensite). The difference can be ascribed to the formation of fine magnetic domain patterns and pinning of the magnetic domain walls on antiphase boundaries in the material with a high density of antiphase boundaries due to quenching. The fine domain pattern arising from mutual interactions between antiphase boundaries and ferromagnetic domain walls effectively reduces the magnetocrystalline anisotropy and amplifies the contribution of magnetostriction to the elastic response of the material. As a result, the anomalous elastic softening prior to martensite transformation is significantly enhanced in the quenched sample. Thus, for any comparison of experimental data and theoretical calculations the microstructural changes induced by specific heat treatment must be taken into account.

The full elastic tensor of orthorhombic dysprosium scandate (DyScO(3)) at room temperature was determined by resonant ultrasound spectroscopy (RUS). Measurements were performed on three 500 μm thick substrates with orientations (110), (100) and (001) in the Pbnm (a < b < c) setting. For this purpose, a modification of the RUS method was developed, enabling simultaneous processing of the resonant spectra of several platelet-shaped samples with different crystallographic orientations. The obtained results are compared with ab initio calculations and with elastic constants of other rare-earth scandates, and are used for discussion of the in-plane elasticity of the (110)-oriented substrate.

The applicability of resonant ultrasound spectroscopy on materials with weak spatial gradients in elastic coefficients and density is analyzed. It is shown that such gradients do not affect measurably the resonant spectrum but have a significant impact on the modal shapes. A numerical inverse procedure is proposed to explore the possibility of reconstructing the gradients from experimentally obtained modal shapes. This procedure is tested on synthetic data and applied to determine the gradient of the shear modulus in a continuously graded silicon nitride ceramic material. The results are in a good agreement with the gradient calculated for the examined material theoretically as well as with the results of other experimental methods.

In this paper, linearized approximations of both the forward and the inverse problems of resonant ultrasound spectroscopy for the determination of mechanical properties of thin surface layers are presented. The linear relations between the frequency shifts induced by the deposition of the layer and the in-plane elastic coefficients of the layer are derived and inverted, the applicability range of the obtained linear model is discussed by a comparison with nonlinear models and finite element method (FEM), and an algorithm for the estimation of experimental errors in the inversely determined elastic coefficients is described. In the final part of the paper, the linearized inverse procedure is applied to evaluate elastic coefficients of a 310 nm thick diamond-like carbon layer deposited on a silicon substrate.

Measurements of elastic constants of the austenite phase when approaching the phase transformation either upon cooling or stressing is of the crucial interest for the shape memory alloy field. Acoustic properties (wave velocity and also attenuation changes) of the Cu-Al-Ni single crystal were investigated in situ during stress-induced martensitic transformation at constant (room) temperature. The parent austenite cubic lattice of the Cu-Al-Ni exhibits very high elastic anisotropy (anisotropy factor A approximately 12). The measurements were made using nine combinations of (i) applied uniaxial compression in a given crystal direction, (ii) the wave propagation and (iii) polarization vectors. The chosen configurations are sufficient for evaluation of all independent third order elastic constants (TOEC). The longitudinal modes were also measured by the immersion technique, using the transducer pair in a water tank installed on the testing machine. The device works as "a ultrasonic extensometer" measuring a transverse strain of the specimen. The dependencies of both natural and initial wave velocities on the applied stress may be evaluated. Three elastic constants of the stress-induced martensite were determined. The elastic properties were found to vary with the increasing stress above the Ms transformation temperature, which is interpreted as a precursor for the martensitic transformation. The onset of the transformation was additionally identified from the acoustic emission measurement.