Search

With the rapid development of the internet of things (IoT) era, IoT devices may face limitations in battery capacity and computational capability. Simultaneous wireless information and power transfer (SWIPT) and mobile edge computing (MEC) have emerged as promising technologies to address these challenges. Due to wireless channel fading and susceptibility to obstacles, this paper introduces intelligent reflecting surfaces (IRS) to enhance the spectral and energy efficiency of wireless networks. We propose a system model for IRS-assisted uplink offloading computation, downlink offloading computation results, and simultaneous energy transfer. Considering constraints such as IRS phase shifts, latency, energy harvesting, and offloading transmit power, we jointly optimize the CPU frequency of IoT devices, offloading transmit power, local computation workload, power splitting (PS) ratio, and IRS phase shifts. This establishes a multi-variate coupled nonlinear problem aimed at minimizing IoT devices energy consumption. We design an effective alternating optimization (AO) iterative algorithm based on block coordinate descent, and utilize closed-form solutions, Dinkelbach-based Lagrange dual method, and semidefinite relaxation (SDR) method to minimize IoT devices energy consumption. Simulation results demonstrate that the proposed scheme achieves lower energy consumption compared to other resource allocation strategies.

In this paper, we optimize the secrecy capacity of the legitimate user under resource allocation and security constraints for a multi-antenna environment for the simultaneous transmission of wireless information and power in a dynamic downlink scenario. We study the relationship between secrecy capacity and harvested energy in a power-splitting configuration for a nonlinear energy-harvesting model under co-located conditions. The capacity maximization problem is formulated for the vehicle-to-vehicle communication scenario. The formulated problem is non-convex NP-hard, so we reformulate it into a convex form using a divide-and-conquer approach. We obtain the optimal transmit power matrix and power-splitting ratio values that guarantee positive values of the secrecy capacity. We analyze different vehicle-to-vehicle communication settings to validate the differentiation of the proposed algorithm in maintaining both reliability and security. We also substantiate the effectiveness of the proposed approach by analyzing the trade-offs between secrecy capacity and harvested energy.

This paper investigates the power control and resource allocation problem in a simultaneously wireless information and power transfer (SWIPT)-based cognitive two-way relay network, in which two secondary users exchange information through a power splitting (PS) energy harvesting (EH) cognitive relay node underlay in a primary network. To enhance the secondary networks's transmission ability without detriment to the primary network, we formulate an optimization to maximize the minimum transmission rates of the cognitive users by jointly optimizing power allocation at the sources, the time allocation of transmission frames and power splitting at the relay, under the constraint that the transmission power of the cognitive network is set not to exceed the primary user interference threshold to ensure primary work performance. To efficiently solve this problem, a sub-optimal algorithm named the joint power control and resource allocation (JPCRA) scheme is proposed, in which we decouple the non-convex problem into convex problems and use alternative steps in the optimization algorithm to get final solutions. Numerical results reveal that the proposed scheme enhances transmission fairness and outperforms three traditional schemes.

The advent of simultaneous wireless information and power (SWIPT) has been regarded as a promising technique to provide power supplies for an energy sustainable Internet of Things (IoT), which is of paramount importance due to the proliferation of high data communication demands of low-power network devices. In such networks, a multi-antenna base station (BS) in each cell can be utilized to concurrently transmit messages and energies to its intended IoT user equipment (IoT-UE) with a single antenna under a common broadcast frequency band, resulting in a multi-cell multi-input single-output (MISO) interference channel (IC). In this work, we aim to find the trade-off between the spectrum efficiency (SE) and energy harvesting (EH) in SWIPT-enabled networks with MISO ICs. For this, we derive a multi-objective optimization (MOO) formulation to obtain the optimal beamforming pattern (BP) and power splitting ratio (PR), and we propose a fractional programming (FP) model to find the solution. To tackle the nonconvexity of FP, an evolutionary algorithm (EA)-aided quadratic transform technique is proposed, which recasts the nonconvex problem as a sequence of convex problems to be solved iteratively. To further reduce the communication overhead and computational complexity, a distributed multi-agent learning-based approach is proposed that requires only partial observations of the channel state information (CSI). In this approach, each BS is equipped with a double deep Q network (DDQN) to determine the BP and PR for its UE with lower computational complexity based on the observations through a limited information exchange process. Finally, with the simulation experiments, we verify the trade-off between SE and EH, and we demonstrate that, apart from the FP algorithm introduced to provide superior solutions, the proposed DDQN algorithm also shows its performance gain in terms of utility to be up to 1.23-, 1.87-, and 3.45-times larger than the Advantage Actor Critic (A2C), greedy, and random algorithms, respectively, in comparison in the simulated environment.

In this study, we investigate the maximization of the available energy for an unmanned aerial vehicle (UAV)-aided simultaneous wireless information and power transfer (SWIPT) system, in which the ground terminals (GTs) decode information and collect energy simultaneously from the downlink signal sent by the UAV based on a power splitting (PS) policy. To guarantee that each GT has a fair amount of available energy, our aim is to optimize the trajectory and transmit power of the UAV and the PS ratio of the GTs to maximize the minimum average available energy among all GTs while ensuring the average spectral efficiency requirement. To address the nonconvexity of the formulated optimization problem, we apply a successive convex optimization technique and propose an iterative algorithm to derive the optimal strategies of the UAV and GTs. Through performance evaluations, we show that the proposed scheme outperforms the existing baseline schemes in terms of the max-min available energy by adaptively controlling the optimization variables according to the situation.

As an advanced technology, simultaneous wireless information and power transfer (SWIPT), combined with the internet of things (IoT) devices, can effectively extend the online cycle of the terminal. To cope with the fluctuation of energy harvesting by the hybrid access points (H-AP), the energy cooperation base station is introduced to realize the sharing of renewable energy. In this paper, we study the SWIPT-enabled IoT networks with cooperation. Our goal is to maximize the energy efficiency of the system, and at the same time, we need to meet the energy harvesting constraints, user quality of service (QoS) constraints and transmission power constraints. We jointly solve the power allocation, time switching and energy cooperation problems. Because this problem is a nonlinear programming problem, it is difficult to solve directly, so we use the alternating variable method, the iterative algorithm is used to solve the power allocation and time switching problem, and the matching algorithm is used to solve the energy cooperation problem. Simulation results show that the proposed algorithm has obvious advantages in energy efficiency performance compared with the comparison algorithm. At the same time, it is also proved that the introduction of energy cooperation technology can effectively reduce system energy consumption and improve system energy efficiency.

With the emergence of the Internet of Things (IoT), billions of wireless devices, including sensors and wearable devices, are evolving under the IoT technology. The limited battery life of the sensor nodes remains a crucial implementation challenge to enable such a revolution, primarily because traditional battery replacement requires enormous human effort. Wirelessly powered sensor networks (WPSNs), which would eliminate the need for regular battery replacement and improve the overall lifetime of sensor nodes, are the most promising solution to efficiently address the limited battery life of the sensor nodes. In this study, an in-depth survey is conducted on the wireless power transfer (WPT) techniques through which sensor devices can harvest energy to avoid frequent node failures. Following a general overview of WPSNs, three wireless power transfer models are demonstrated, and their respective enabling techniques are discussed in light of the existing literature. Moreover, the existing WPT techniques are comprehensively reviewed in terms of critical design parameters and performance factors. Subsequently, crucial key performance-enhancing techniques for WPT in WPSNs are discussed. Finally, several challenges and future directions are presented for motivating further research on WPSNs.

This paper considers the physical layer security (PLS) of a simultaneous wireless information and power transfer (SWIPT) relay communication system composed of a legitimate source-destination pair and some eavesdroppers. Supposing a disturbance of channel status information (CSI) between relay and eavesdroppers in a bounded ellipse, we intend to design a robust beamformer to maximum security rate in the worst case on the constraints of relay energy consumption. To handle this non-convex optimization problem, we introduce a slack variable to transform the original problem into two sub-problems firstly, then an algorithm employing a semidefinite relaxation (SDR) technique and S-procedure is proposed to tackle above two sub-problems. Although our study was conducted in the scene of a direct link among source, destination, and eavesdroppers that is non-existing, we demonstrate that our conclusions can be easily extended to the scene for which a direct link among source, destination and eavesdroppers exist. Numerical simulation results compared with the benchmark scheme are provided to prove the effectiveness and superior performance of our algorithm.

In the present paper, we investigate the performance of the simultaneous wireless information and power transfer (SWIPT) based cooperative cognitive radio networks (CCRNs). In particular, the outage probability is derived in the closed-form expressions under the opportunistic partial relay selection. Different from the conventional CRNs in which the transmit power of the secondary transmitters count merely on the aggregate interference measured on the primary networks, the transmit power of the SWIPT-enabled transmitters is also constrained by the harvested energy. As a result, the mathematical framework involves more correlated random variables and, thus, is of higher complexity. Monte Carlo simulations are given to corroborate the accuracy of the mathematical analysis and to shed light on the behavior of the OP with respect to several important parameters, e.g., the transmit power and the number of relays. Our findings illustrate that increasing the transmit power and/or the number of relays is beneficial for the outage probability.

In order to support a massive number of resource-constrained Internet-of-Things (IoT) devices and machine-type devices, it is crucial to design a future beyond 5G/6G wireless networks in an energy-efficient manner while incorporating suitable network coverage expansion methodologies. To this end, this paper proposes a novel two-hop hybrid active-and-passive relaying scheme to facilitate simultaneous wireless information and power transfer (SWIPT) considering both time-switching (TS) and power-splitting (PS) receiver architectures, while dynamically modelling the involved dual-hop time-period (TP) metric. An optimization problem is formulated to jointly optimize the throughput, harvested energy, and transmit power of a SWIPT-enabled system with the proposed hybrid scheme. In this regard, we provide two distinct ways to obtain suitable solutions based on the Lagrange dual technique and Dinkelbach method assisted convex programming, respectively, where both the approaches yield an appreciable solution within polynomial computational time. The experimental results are obtained by directly solving the primal problem using a non-linear optimizer. Our numerical results in terms of weighted utility function show the superior performance of the proposed hybrid scheme over passive repeater-only and active relay-only schemes, while also depicting their individual performance benefits over the corresponding benchmark SWIPT systems with the fixed-TP.

Cooperative Non-Orthogonal Multiple Access (NOMA) with Simultaneous Wireless Information and Power Transfer (SWIPT) communication can not only effectively improve the spectrum efficiency and energy efficiency of wireless networks but also extend their coverage. An important design issue is to incentivize a full duplex (FD) relaying center user to participate in the cooperative process and achieve a win-win situation for both the base station (BS) and the center user. Some private information of the center users are hidden from the BS in the network. A contract theory-based incentive mechanism under this asymmetric information scenario is applied to incentivize the center user to join the cooperative communication to maximize the BS's benefit utility and to guarantee the center user's expected payoff. In this work, we propose a matching theory-based Gale-Shapley algorithm to obtain the optimal strategy with low computation complexity in the multi-user pairing scenario. Simulation results indicate that the network performance of the proposed FD cooperative NOMA and SWIPT communication is much better than the conventional NOMA communication, and the benefit utility of the BS with the stable match strategy is nearly close to the multi-user pairing scenario with complete channel state information (CSI), while the center users get the satisfied expected payoffs.

In this paper, we study the physical layer security for simultaneous wireless information and power transfer (SWIPT)-based half-duplex (HD) decode-and-forward relaying system. We consider a system model including one transmitter that tries to transmit information to one receiver under the help of multiple relay users and in the presence of one eavesdropper that attempts to overhear the confidential information. More specifically, to investigate the secrecy performance, we derive closed-form expressions of outage probability (OP) and secrecy outage probability for dynamic power splitting-based relaying (DPSBR) and static power splitting-based relaying (SPSBR) schemes. Moreover, the lower bound of secrecy outage probability is obtained when the source's transmit power goes to infinity. The Monte Carlo simulations are given to corroborate the correctness of our mathematical analysis. It is observed from simulation results that the proposed DPSBR scheme outperforms the SPSBR-based schemes in terms of OP and SOP under the impact of different parameters on system performance.

Full-duplex (FD) with simultaneous wireless information and power transfer (SWIPT) in wireless ad hoc networks has received increased attention as a technology for improving spectrum and energy efficiency. This paper studies the outage performance for a SWIPT-based decode-and-forward (DF) FD relaying network consisting of a single-antenna source S, a two-antenna relay R, and a multi-antenna destination D. Specifically, we propose four protocols, namely static time-switching factor with selection combining (STSF-SC), static time-switching factor with maximal ratio combining (STSF-MRC), optimal dynamic time-switching factor with selection combining (ODTSF-SC), and optimal dynamic time-switching factor with maximal ratio combining (ODTSF-MRC) to fully investigate the outage performance of the proposed system. In particular, the optimal time-switching factor from the ODTSF-SC and ODTSF-MRC methods is designed to maximize the total received data at the destination. In this context, we derive exact closed-formed expressions for all schemes in terms of the outage probability (OP). Finally, the Monte Carlo simulations are conducted to corroborate the theoretical analysis's correctness and the proposed schemes' effectiveness.

The internet of things (IoT) is becoming more indispensable in modern society as the further development and maturity of information technology progresses. However the exponential growth of IoT devices leads to severe energy consumption. As a technology with broad application prospects, simultaneous wireless information and power transfer (SWIPT) enables IoT devices to harvest energy from receiving radio frequency (RF) signals while ensuring information transmission. In this paper, we investigate the transmission rate optimization problem for a dual-hop multi-relay IoT system, where a decode-and-forward (DF) relay supports the SWIPT technique. We jointly optimize the resource including power and subcarrier allocation, to maximize the system transmission rate. The time-sharing strategy and Lagrange dual method are used to solve this optimization problem. Simulation results reveal that the proposed algorithm has a larger transmission rate than other benchmark algorithms when ensuring each relay has no additional energy supply. Specifically, the proposed algorithm improves the information transmission rate by 2.8%, 3.4% and 43% compared with other algorithms in the case of five relays when the source's power is equal to 0.5 W, respectively.

In this paper, we present a few novel simultaneous wireless information and power transfer (SWIPT) schemes that can be effectively used in various 5G wireless network implementations. First, we study the possibility of integrating distributed energy beamforming with the data rate fairness beamforming in a cooperative communication system with multiple cooperative relays and multiple destination users communicating simultaneously. We show that the system exploits significant performance gain using such a joint energy and data rate fairness beamforming scheme. Further, we propose an enhanced version of the SWIPT scheme, the energy-efficient modulation-based non-orthogonal multiple access (M-NOMA) SWIPT scheme, and observe its system efficiency in terms of more harvested energy. Finally, we consider an energy-harvesting SWIPT scheme where the channel response is estimated using the energy-harvesting signal as pilots superimposed on the information signal. For such a scheme, we compute the optimum transmit power ratio between the pilot and information signals under varying SNR conditions and improve the accuracy of the decoding process at the reception.

Vehicle to everything (V2X) has been deemed a promising technology due to its potential to achieve traffic safety and efficiency. This paper considers a V2X downlink system with a simultaneous wireless information and power transfer (SWIPT) system where the base station not only conveys data and energy to two types of wireless vehicular receivers, such as one hybrid power-splitting vehicular receiver, and multiple energy vehicular receivers, but also prevents information from being intercepted by the potential eavesdroppers (idle energy vehicular receivers). Both the base station and the energy vehicular receivers are equipped with multiple antennas, whereas the information vehicular receiver is equipped with a single antenna. In particular, the imperfect channel state information (CSI) and the practical nonlinear energy harvesting (EH) model are taken into account. The non-convex optimization problem is formulated to maximize the minimum harvested energy power among the energy vehicular receivers satisfying the lowest harvested energy power threshold at the information vehicular receiver and secure vehicular communication requirements. In light of the intractability of the optimization problem, the semidefinite relaxation (SDR) technique and variable substitutions are applied, and the optimal solution is proven to be tight. A number of results demonstrate that the proposed robust secure beamforming scheme has better performance than other schemes.

The paper technically proposes a newly secure scheme for simultaneous wireless power and information transfer (SWIPT) frameworks. We take into account an orthogonal frequency division multiplexing (OFDM)-based game which is in relation to a multi-input multi-output multi-antenna Eavesdropper (MIMOME) strategy. The transceiver is generally able to witness the case imperfect channel state information (ICSI) at the transmitter side. Transferring power and information are conducted via orthogonally provided sub-carriers. We propose a two-step Stackelberg game to optimise the Utility Functions of both power and information parts. The price for the first stage (in connection with information) is the total power of the other sub-carriers over which the energy is supported. In this stage, the sum secrecy rate should be essentially maximised. The second level of the proposed Stackelberg game is in association with the energy part. In this stage, the price essentially is the total power of the other sub-carriers over which the information is transferred. In this stage, additionally, the total power transferred is fundamentally maximised. Subsequently, the optimally and near-optimally mathematical solutions are derived, for some special cases such as ICSI one. Finally, the simulations validate our scheme as well, authenticating our contribution's tightness and efficiency., Competing Interests: The authors declare no conflict of interest.

Energy-constrained wireless networks, such as wireless sensor networks (WSNs), are usually powered by fixed energy supplies (e.g., batteries), which limits the operation time of networks. Simultaneous wireless information and power transfer (SWIPT) is a promising technique to prolong the lifetime of energy-constrained wireless networks. This paper investigates the performance of an underlay cognitive sensor network (CSN) with SWIPT-enabled relay node. In the CSN, the amplify-and-forward (AF) relay sensor node harvests energy from the ambient radio-frequency (RF) signals using power splitting-based relaying (PSR) protocol. Then, it helps forward the signal of source sensor node (SSN) to the destination sensor node (DSN) by using the harvested energy. We study the joint resource optimization including the transmit power and power splitting ratio to maximize CSN's achievable rate with the constraint that the interference caused by the CSN to the primary users (PUs) is within the permissible threshold. Simulation results show that the performance of our proposed joint resource optimization can be significantly improved., Competing Interests: The authors declare no conflict of interest.

Recently, the simultaneous wireless information and power transfer (SWIPT) technique has been regarded as a promising approach to enhance performance of wireless sensor networks with limited energy supply. However, from a green communication perspective, energy efficiency optimization for SWIPT system design has not been investigated in Wireless Rechargeable Sensor Networks (WRSNs). In this paper, we consider the tradeoffs between energy efficiency and three factors including spectral efficiency, the transmit power and outage target rate for two different modes, i.e., power splitting (PS) and time switching modes (TS), at the receiver. Moreover, we formulate the energy efficiency maximization problem subject to the constraints of minimum Quality of Service (QoS), minimum harvested energy and maximum transmission power as non-convex optimization problem. In particular, we focus on optimizing power control and power allocation policy in PS and TS modes to maximize energy efficiency of data transmission. For PS and TS modes, we propose the corresponding algorithm to characterize a non-convex optimization problem that takes into account the circuit power consumption and the harvested energy. By exploiting nonlinear fractional programming and Lagrangian dual decomposition, we propose suboptimal iterative algorithms to obtain the solutions of non-convex optimization problems. Furthermore, we derive the outage probability and effective throughput from the scenarios that the transmitter does not or partially know the channel state information (CSI) of the receiver. Simulation results illustrate that the proposed optimal iterative algorithm can achieve optimal solutions within a small number of iterations and various tradeoffs between energy efficiency and spectral efficiency, transmit power and outage target rate, respectively., Competing Interests: The authors declare no conflict of interest.