Search

We present a fairly understudied material system suitable for the realization of tunable quantum-dot (QD) emission within the visible-to-near-infrared spectrum (in particular, in the 650-720 nm wavelength range). Specifically, crystal-pure wurtzite gallium phosphide (GaP) nanowires (NWs) are synthesized, incorporating single gallium arsenide phosphide (GaAs x P 1- x ) QDs of various compositions. Detailed growth procedures are outlined, accompanied by an analysis of the synthesis challenges encountered during the realization of these nanostructures and the strategies to solve them. Notably, a great degree of control over the shape and composition of the ternary alloy QD is achieved, enabling a well-defined confinement and the tunability of the emission wavelength. This is confirmed by low-temperature microphotoluminescence (μ-PL) investigation showing that the NW emission is dominated by a narrow peak whose energy shifts according to the As content of the QD: from ∼650 nm (As = 70%) to ∼720 nm (As = 90%). Moreover, a localized and efficient carrier recombination mechanism is found by single-NW μ-PL mapping, confirming that this emission arises from the QD. Finally, a power and temperature μ-PL study is presented and used to characterize the QD excitonic properties and the nature of the involved energy levels. Our findings underscore the potential for these QDs in NWs with tailored compositions to achieve the desired light emission characteristics, thereby advancing applications in quantum optics and nanophotonics.

InAs x P 1- x quantum dots (QDs) in InP nanowires (NWs) have been realized as a platform for emission at telecom wavelengths. These QDs are typically grown in NWs with the wurtzite crystal phase, but in this case, ultrathin diameters are required to achieve defect-free heterostructures, making the structures less robust. In this work, we demonstrate the growth of pure zincblende InAs x P 1- x QDs in InP NWs, which enabled an increase in NW diameters to about 45 nm, achieved by employing Au-assisted vapor liquid solid growth in a chemical beam epitaxy system. We studied the growth of InP/InAs x P 1- x heterostructures with different compositions to control the straight growth along the ⟨100⟩ direction and to tune the emission wavelength. Interestingly, we found that the growth mechanism for pure InAs QDs is different compared to that for InAs x P 1- x alloy QDs. This allowed us to optimize different growth protocols to achieve straight growth of the final QD NWs. We successfully obtained the growth of InAs x P 1- x QDs with a composition in the range of x = 0.24-1.00. By means of microphotoluminescence measurements, we demonstrate the tunability of the emission in dependence of the InAs x P 1- x QD composition and morphology, remarkably observing an emission at the telecom O-band for a 10 nm thick QD with 80% of As content.

InAs quantum wells (QWs) are promising material systems due to their small effective mass, narrow bandgap, strong spin-orbit coupling, large g-factor, and transparent interface to superconductors. Therefore, they are promising candidates for the implementation of topological superconducting states. Despite this potential, the growth of InAs QWs with high crystal quality and well-controlled morphology remains challenging. Adding an overshoot layer at the end of the metamorphic buffer layer, i.e., a layer with a slightly larger lattice constant than the active region of the device, helps to overcome the residual strain and provides optimally relaxed lattice parameters for the QW. In this work, we systematically investigated the influence of overshoot layer thickness on the morphological, structural, strain, and transport properties of undoped InAs QWs on GaAs(100) substrates. Transmission electron microscopy reveals that the metamorphic buffer layer, which includes the overshoot layer, provides a misfit dislocation-free InAs QW active region. Moreover, the residual strain in the active region is compressive in the sample with a 200 nm-thick overshoot layer but tensile in samples with an overshoot layer thicker than 200 nm, and it saturates to a constant value for overshoot layer thicknesses above 350 nm. We found that electron mobility does not depend on the crystallographic directions. A maximum electron mobility of 6.07 × 10 5 cm 2 /Vs at 2.6 K with a carrier concentration of 2.31 × 10 11 cm -2 in the sample with a 400 nm-thick overshoot layer has been obtained.

Optical frequency comb synthesizers, operating in the harmonic regime, are metrological sources in which the emitted optical power is concentrated in a few modes, spaced by several multiples of the cavity free spectral range (FSR). This behavior reflects in a large correlation degree and, in principle, in an increased optical power per mode. In miniaturized quantum cascade lasers (QCLs), harmonic frequency combs (HFCs) are hence particularly attracting to explore quantum correlation effects between adjacent harmonic modes, enabled by the inherently large gain media third-order χ (3) Kerr nonlinearity, even if controlled generation of stable HFCs of predefined order, is typically demanding in such electrically pumped sources. Here, we demonstrate stable 2 nd order and 3 rd order HFC emission in terahertz frequency QCLs by respectively patterning an individual or a couple of equally spaced distributed multilayer graphene absorbers on the top metallic waveguides., Competing Interests: Conflict of interest: Authors state no conflict of interest regarding this article., (© 2024 the author(s), published by De Gruyter, Berlin/Boston.)

We experimentally and computationally investigate the magneto-conductance across the radial heterojunction of InAs-GaSb core-shell nanowires under a magnetic field, B , up to 30 T and at temperatures in the range 4.2-200 K. The observed double-peak negative differential conductance markedly blue-shifts with increasing B . The doublet accounts for spin-polarized currents through the Zeeman split channels of the InAs (GaSb) conduction (valence) band and exhibits strong anisotropy with respect to B orientation and marked temperature dependence. Envelope function approximation and a semiclassical (WKB) approach allow to compute the magnetic quantum states of InAs and GaSb sections of the nanowire and to estimate the B -dependent tunneling current across the broken-gap interface. Disentangling different magneto-transport channels and a thermally activated valence-to-valence band transport current, we extract the g -factor from the spin-up and spin-down d I /d V branch dispersion, revealing a giant, strongly anisotropic g -factor in excess of 60 (100) for the radial (tilted) field configurations.

The integration of carbon nanostructures with semiconductor nanowires holds significant potential for energy-efficient integrated circuits. However, achieving precise control over the positioning and stability of these interconnections poses a major challenge. This study presents a method for the controlled growth of carbon nanofibers (CNFs) on vertically aligned indium arsenide (InAs) nanowires. The CNF/InAs hybrid structures, synthesized using chemical vapor deposition (CVD), were successfully produced without compromising the morphology of the pristine nanowires. Under optimized conditions, preferential growth of the carbon nanofibers in the direction perpendicular to the InAs nanowires was observed. Moreover, when the CVD process employed iron as a catalyst, an increased growth rate was achieved. With and without the presence of iron, carbon nanofibers nucleate preferentially on the top of the InAs nanowires, indicating a tip growth mechanism presumably catalysed by a gold-indium alloy that selectively forms in that region. These results represent a compelling example of controlled interconnections between adjacent InAs nanowires formed by carbon fibers.

The possibility to tune the functional properties of nanomaterials is key to their technological applications. Superlattices, i.e., periodic repetitions of two or more materials in one or more dimensions, are being explored for their potential as materials with tailor-made properties. Meanwhile, nanowires offer a myriad of possibilities to engineer systems at the nanoscale, as well as to combine materials that cannot be put together in conventional heterostructures due to the lattice mismatch. In this work, we investigate GaAs/GaP superlattices embedded in GaP nanowires and demonstrate the tunability of their phononic and optoelectronic properties by inelastic light scattering experiments corroborated by ab initio calculations. We observe clear modifications in the dispersion relation for both acoustic and optical phonons in the superlattices nanowires. We find that by controlling the superlattice periodicity, we can achieve tunability of the phonon frequencies. We also performed wavelength-dependent Raman microscopy on GaAs/GaP superlattice nanowires, and our results indicate a reduction in the electronic bandgap in the superlattice compared to the bulk counterpart. All of our experimental results are rationalized with the help of ab initio density functional perturbation theory (DFPT) calculations. This work sheds fresh insights into how material engineering at the nanoscale can tailor phonon dispersion and open pathways for thermal engineering., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

Objective: The purpose of this study was to examine the evidence of the efficacy of rehabilitation approaches for improving severe upper limb impairments and disability during acute and early subacute stroke, taking into consideration the dosage of therapy., Methods: Randomized controlled trials from PubMed, Web of Science, and Scopus databases were searched by 2 independent researchers. Studies were selected if they involved active rehabilitation interventions that were conducted in the acute stage (<7 days after stroke) or the early subacute stage (>7 days-3 months after stroke), with the aim of improving severe upper limb motor impairments and disability. Data were extracted on the basis of the type and effect of rehabilitation interventions and on the dosage (duration, frequency, session length, episode difficulty, and intensity). Study quality was assessed using the Physiotherapy Evidence Database Scale., Results: Twenty-three studies (1271 participants) with fair to good methodological quality were included. Only 3 studies were performed in the acute stage. Regardless of the type of intervention, upper limb rehabilitation was found to be beneficial for severe upper limb impairments and disability. Robotic therapy and functional electrical stimulation were identified as the most popular upper limb interventions; however, only a limited number of studies showed their superiority over a dose-matched control intervention for severe upper limb impairments in the subacute stage. A longer rehabilitation session length (<60 minutes) did not seem to have a larger impact on the magnitude of improved upper limb impairments., Conclusion: Different rehabilitation approaches seem to improve severe upper limb impairments and disability in the subacute stage after stroke; however, they are not distinctly superior to standard care or other interventions provided at the same dosage., Impact: Robotic therapy and functional electrical stimulation add variety to rehabilitation programs, but their benefit has not been shown to exceed that of standard care. Further research is necessary to identify the impact of dosage parameters (eg, intensity) on severe upper limb motor impairments and function, especially in the acute stage., (© The Author(s) 2023. Published by Oxford University Press on behalf of the American Physical Therapy Association. All rights reserved. For permissions, please email: journals.permissions@oup.com.)

Thermoelectric polyelectrolytes are emerging as ideal material platform for self-powered bio-compatible electronic devices and sensors. However, despite the nanoscale nature of the ionic thermodiffusion processes underlying thermoelectric efficiency boost in polyelectrolytes, to date no evidence for direct probing of ionic diffusion on its relevant length and time scale has been reported. This gap is bridged by developing heat-driven hybrid nanotransistors based on InAs nanowires embedded in thermally biased Na + -functionalized (poly)ethyleneoxide, where the semiconducting nanostructure acts as a nanoscale probe sensitive to the local arrangement of the ionic species. The impact of ionic thermoelectric gating on the nanodevice electrical response is addressed, investigating the effect of device architecture, bias configuration and frequency of the heat stimulus, and inferring optimal conditions for the heat-driven nanotransistor operation. Microscopic quantities of the polyelectrolyte such as the ionic diffusion coefficient are extracted from the analysis of hysteretic behaviors rising in the nanodevices. The reported experimental platform enables simultaneously the ionic thermodiffusion and nanoscale resolution, providing a framework for direct estimation of polyelectrolytes microscopic parameters. This may open new routes for heat-driven nanoelectronic applications and boost the rational design of next-generation polymer-based thermoelectric materials., (© 2023 The Authors. Advanced Science published by Wiley-VCH GmbH.)

Nanowire geometry allows semiconductor heterostructures to be obtained that are not achievable in planar systems, as in, for example, axial superlattices made of large lattice mismatched materials. This provides a great opportunity to explore new optical transitions and vibrational properties resulting from the superstructure. Moreover, superlattice nanowires are expected to show improved thermoelectric properties, owing to the dominant role of surfaces and interfaces that can scatter phonons more effectively, reducing the lattice thermal conductivity. Here, we show the growth of long (up to 100 repetitions) GaAs/GaP superlattice nanowires with different periodicities, uniform layer thicknesses, and sharp interfaces, realized by means of Au-assisted chemical beam epitaxy. By optimizing the growth conditions, we obtained great control of the nanowire diameter, growth rate, and superlattice periodicity, offering a valuable degree of freedom for engineering photonic and phononic properties at the nanoscale. As a proof of concept, we analyzed a single type of superlattice nanowire with a well-defined periodicity and we observed room temperature optical emission and new phonon modes. Our results prove that high-quality GaAs/GaP superlattice nanowires have great potential for phononic and optoelectronic studies and applications.

Correlations are fundamental in describing many-body systems. However, in experiments, correlations are notoriously difficult to assess on a microscopic scale, especially for electron spins. Even though it is firmly established theoretically that the electrons in a Cooper pair 1 of a superconductor form maximally spin-entangled singlet states with opposite spin projections 2-4 , no spin correlation experiments have been demonstrated so far. Here we report the direct measurement of the spin cross-correlations between the currents of a Cooper pair splitter 5-13 , an electronic device that emits electrons originating from Cooper pairs. We use ferromagnetic split-gates 14,15 , compatible with nearby superconducting structures, to individually spin polarize the transmissions of the quantum dots in the two electronic paths, which act as tunable spin filters. The signals are detected in standard transport and in highly sensitive transconductance experiments. We find that the spin cross-correlation is negative, consistent with spin singlet emission, and deviates from the ideal value mostly due to the overlap of the Zeeman split quantum dot states. Our results demonstrate a new route to perform spin correlation experiments in nano-electronic devices, especially suitable for those relying on magnetic field sensitive superconducting elements, like triplet or topologically non-trivial superconductors 16-18 , or to perform Bell tests with massive particles 19,20 ., (© 2022. The Author(s), under exclusive licence to Springer Nature Limited.)

We report nonreciprocal dissipation-less transport in single ballistic InSb nanoflag Josephson junctions. Applying an in-plane magnetic field, we observe an inequality in supercurrent for the two opposite current propagation directions. Thus, these devices can work as Josephson diodes, with dissipation-less current flowing in only one direction. For small fields, the supercurrent asymmetry increases linearly with external field, and then it saturates as the Zeeman energy becomes relevant, before it finally decreases to zero at higher fields. The effect is maximum when the in-plane field is perpendicular to the current vector, which identifies Rashba spin-orbit coupling as the main symmetry-breaking mechanism. While a variation in carrier concentration in these high-quality InSb nanoflags does not significantly influence the supercurrent asymmetry, it is instead strongly suppressed by an increase in temperature. Our experimental findings are consistent with a model for ballistic short junctions and show that the diode effect is intrinsic to this material.

In order to use III-V compound semiconductors as active channel materials in advanced electronic and quantum devices, it is important to achieve a good epitaxial growth on silicon substrates. As a first step toward this, we report on the selective-area growth of GaP/InGaP/InP/InAsP buffer layer nanotemplates on GaP substrates which are closely lattice-matched to silicon, suitable for the integration of in-plane InAs nanowires. Scanning electron microscopy reveals a perfect surface selectivity and uniform layer growth inside 150 and 200 nm large SiO 2 mask openings. Compositional and structural characterization of the optimized structure performed by transmission electron microscopy shows the evolution of the major facet planes and allows a strain distribution analysis. Chemically uniform layers with well-defined heterointerfaces are obtained, and the topmost InAs layer is free from any dislocation. Our study demonstrates that a growth sequence of thin layers with progressively increasing lattice parameters is effective to efficiently relax the strain and eventually obtain high quality in-plane InAs nanowires on large lattice-mismatched substrates.

InSb nanoflags are grown by chemical beam epitaxy in regular arrays on top of Au-catalyzed InP nanowires synthesized on patterned SiO 2 /InP(111)B substrates. Two-dimensional geometry of the nanoflags is achieved by stopping the substrate rotation in the step of the InSb growth. Evolution of the nanoflag length, thickness and width with the growth time is studied for different pitches (distances in one of the two directions of the substrate plane). A model is presented which explains the observed non-linear time dependence of the nanoflag length, saturation of their thickness and gradual increase in the width by the shadowing effect for re-emitted Sb flux. These results might be useful for morphological control of InSb and other III-V nanoflags grown in regular arrays.

Engineering detection dynamics in nanoscale receivers that operate in the far infrared (frequencies in the range 0.1-10 THz) is a challenging task that, however, can open intriguing perspectives for targeted applications in quantum science, biomedicine, space science, tomography, security, process and quality control. Here, we exploited InAs nanowires (NWs) to engineer antenna-coupled THz photodetectors that operated as efficient bolometers or photo thermoelectric receivers at room temperature. We controlled the core detection mechanism by design, through the different architectures of an on-chip resonant antenna, or dynamically, by varying the NW carrier density through electrostatic gating. Noise equivalent powers as low as 670 pWHz -1/2 with 1 µs response time at 2.8 THz were reached.

Low-dimensional nanosystems are promising candidates for manipulating, controlling, and capturing photons with large sensitivities and low noise. If quantum engineered to tailor the energy of the localized electrons across the desired frequency range, they can allow devising of efficient quantum sensors across any frequency domain. Here, we exploit the rich few-electron physics to develop millimeter-wave nanodetectors employing as a sensing element an InAs/InAs 0.3 P 0.7 quantum-dot nanowire, embedded in a single-electron transistor. Once irradiated with light, the deeply localized quantum element exhibits an extra electromotive force driven by the photothermoelectric effect, which is exploited to efficiently sense radiation at 0.6 THz with a noise equivalent power <8 pWHz -1/2 and almost zero dark current. The achieved results open intriguing perspectives for quantum key distributions, quantum communications, and quantum cryptography at terahertz frequencies.

Ordered arrays of vertically aligned semiconductor nanowires are regarded as promising candidates for the realization of all-dielectric metamaterials, artificial electromagnetic materials, whose properties can be engineered to enable new functions and enhanced device performances with respect to naturally existing materials. In this review we account for the recent progresses in substrate nanopatterning methods, strategies and approaches that overall constitute the preliminary step towards the bottom-up growth of arrays of vertically aligned semiconductor nanowires with a controlled location, size and morphology of each nanowire. While we focus specifically on III-V semiconductor nanowires, several concepts, mechanisms and conclusions reported in the manuscript can be invoked and are valid also for different nanowire materials.

High-quality heteroepitaxial two-dimensional (2D) InSb layers are very difficult to realize because of the large lattice mismatch with other widespread semiconductor substrates. A way around this problem is to grow free-standing 2D InSb nanostructures on nanowire (NW) stems, thanks to the capability of NWs to efficiently relax elastic strain along the sidewalls when lattice-mismatched semiconductor systems are integrated. In this work, we optimize the morphology of free-standing 2D InSb nanoflags (NFs). In particular, robust NW stems, optimized growth parameters, and the use of reflection high-energy electron diffraction (RHEED) to precisely orient the substrate for preferential growth are implemented to increase the lateral size of the 2D InSb NFs. Transmission electron microscopy (TEM) analysis of these NFs reveals defect-free zinc blend crystal structure, stoichiometric composition, and relaxed lattice parameters. The resulting NFs are large enough to fabricate Hall-bar contacts with suitable length-to-width ratio enabling precise electrical characterization. An electron mobility of ∼29 500 cm 2 /(V s) is measured, which is the highest value reported for free-standing 2D InSb nanostructures in literature. We envision the use of 2D InSb NFs for fabrication of advanced quantum devices., Competing Interests: The authors declare no competing financial interest., (© 2021 The Authors. Published by American Chemical Society.)

We fabricate dual-gated electric double layer (EDL) field effect transistors based on InAs nanowires gated with an ionic liquid, and we perform electrical transport measurements in the temperature range from room temperature to 4.2 K. By adjusting the spatial distribution of ions inside the ionic liquid employed as gate dielectric, we electrostatically induce doping in the nanostructures under analysis. We extract low-temperature carrier concentration and mobility in very different doping regimes from the analysis of current-voltage characteristics and transconductances measured exploiting global back-gating. In the liquid gate voltage interval from -2 to 2 V, carrier concentration can be enhanced up to two orders of magnitude. Meanwhile, the effect of the ionic accumulation on the nanowire surface turns out to be detrimental to the electron mobility of the semiconductor nanostructure: the electron mobility is quenched irrespectively to the sign of the accumulated ionic species. The reported results shine light on the effective impact on crucial transport parameters of EDL gating in semiconductor nanodevices and they should be considered when designing experiments in which electrostatic doping of semiconductor nanostructures via electrolyte gating is involved.

We have studied the effects of optical-frequency light on proximitized InAs/Al Josephson junctions based on highly n-doped InAs nanowires at varying incident photon flux and at three different photon wavelengths. The experimentally obtained IV curves were modeled using a resistively shunted junction model which takes scattering at the contact interfaces into account. Despite the fact that the InAs weak link is photosensitive, the Josephson junctions were found to be surprisingly robust, interacting with the incident radiation only through heating, whereas above the critical current our devices showed non-thermal effects resulting from photon exposure. Our work indicates that Josephson junctions based on highly-doped InAs nanowires can be integrated in close proximity to photonic circuits. The results also suggest that such junctions can be used for optical-frequency photon detection through thermal processes by measuring a shift in critical current.

The nanowire platform offers great opportunities for improving the quality and range of applications of semiconductor quantum wells and dots. Here, we present the self-catalyzed growth of InAs/InSb/InAs axial heterostructured nanowires with a single defect-free InSb quantum dot, on Si substrates, by chemical beam epitaxy. A systematic variation of the growth parameters for the InAs top segment has been investigated and the resulting nanowire morphology analyzed. We found that the growth temperature strongly influences the axial and radial growth rates of the top InAs segment. As a consequence, we can reduce the InAs shell thickness around the InSb quantum dot by increasing the InAs growth temperature. Moreover, we observed that both axial and radial growth rates are enhanced by the As line pressure as long as the In droplet on the top of the nanowire is preserved. Finally, the time evolution of the diameter along the entire length of the nanowires allowed us to understand that there are two In diffusion paths contributing to the radial InAs growth and that the interplay of these two mechanisms together with the total length of the nanowires determine the final shape of the nanowires. This study provides insights in understanding the growth mechanisms of self-catalyzed InSb/InAs quantum dot nanowires, and our results can be extended also to the growth of other self-catalyzed heterostructured nanowires, providing useful guidelines for the realization of quantum structures with the desired morphology and properties.

Semiconductor nanowire field-effect transistors represent a promising platform for the development of room-temperature (RT) terahertz (THz) frequency light detectors due to the strong nonlinearity of their transfer characteristics and their remarkable combination of low noise-equivalent powers (<1 nW Hz - 1/2 ) and high responsivities (>100 V/W). Nano-engineering an NW photodetector combining high sensitivity with high speed (sub-ns) in the THz regime at RT is highly desirable for many frontier applications in quantum optics and nanophotonics, but this requires a clear understanding of the origin of the photo-response. Conventional electrical and optical measurements, however, cannot unambiguously determine the dominant detection mechanism due to inherent device asymmetry that allows different processes to be simultaneously activated. Here, we innovatively capture snapshots of the photo-response of individual InAs nanowires via high spatial resolution (35 nm) THz photocurrent nanoscopy. By coupling a THz quantum cascade laser to scattering-type scanning near-field optical microscopy (s-SNOM) and monitoring both electrical and optical readouts, we simultaneously measure transport and scattering properties. The spatially resolved electric response provides unambiguous signatures of photo-thermoelectric and bolometric currents whose interplay is discussed as a function of photon density and material doping, therefore providing a route to engineer photo-responses by design.

Under standard conditions, the electrostatic field-effect is negligible in conventional metals and was expected to be completely ineffective also in superconducting metals. This common belief was recently put under question by a family of experiments that displayed full gate-voltage-induced suppression of critical current in superconducting all-metallic gated nanotransistors. To date, the microscopic origin of this phenomenon is under debate, and trivial explanations based on heating effects given by the negligible electron leakage from the gates should be excluded. Here, we demonstrate the control of the supercurrent in fully suspended superconducting nanobridges. Our advanced nanofabrication methods allow us to build suspended superconducting Ti-based supercurrent transistors which show ambipolar and monotonic full suppression of the critical current for gate voltages of V G C ≃ 18 V and for temperatures up to ∼80% of the critical temperature. The suspended device architecture minimizes the electron-phonon interaction between the superconducting nanobridge and the substrate, and therefore, it rules out any possible contribution stemming from charge injection into the insulating substrate. Besides, our finite element method simulations of vacuum electron tunneling from the gate to the bridge and thermal considerations rule out the cold-electron field emission as a possible driving mechanism for the observed phenomenology. Our findings promise a better understanding of the field effect in superconducting metals.

Research interest in indium antimonide (InSb) has increased significantly in recent years owing to its intrinsic properties and the consequent opportunities to implement next-generation quantum devices. Hence, the precise, reproducible control over morphology and crystalline quality becomes of paramount importance for a practical quantum-device technology. Here, we investigate the growth of InSb nanostructures with different morphologies on InAs stems without pre-growth efforts (patterning). InSb nanostructures such as nanowires (1D), nanoflags (2D) and nanocubes (3D) have been realized by means of Au-assisted chemical beam epitaxy by tailoring the growth parameters like growth temperature, precursor fluxes, sample rotation and substrate orientation. Through morphological and crystallographic characterization, all the as-grown InSb 2D nanostructures are found to be single-crystalline with zinc blende structure, free from any defects such as stacking faults and twin planes. The existence of two families of 2D nanostructures, characterised by an aperture angle at the base of 145° and 160°, is observed and modelled. This study provides useful guidelines for the controlled growth of high-quality InSb nanostructures with different shape.

Fractional conductance is measured by partitioning a ν=1 edge state using gate-tunable fractional quantum Hall (FQH) liquids of filling 1/3 or 2/3 for current injection and detection. We observe two sets of FQH plateaus 1/9, 2/9, 4/9 and 1/6, 1/3, 2/3 at low and high magnetic field ends of the ν=1 plateau, respectively. The findings are explained by magnetic field dependent equilibration of three FQH edge modes with conductance e^{2}/3h arising from edge reconstruction. The results reveal a remarkable enhancement of the equilibration lengths of the FQH edge modes with increasing magnetic field.

We analyze the benefits and shortcomings of a thermal control in nanoscale electronic conductors by means of the contact heating scheme. Ideally, this straightforward approach allows one to apply a known thermal bias across nanostructures directly through metallic leads, avoiding conventional substrate intermediation. We show, by using the average noise thermometry and local noise sensing technique in InAs nanowire-based devices, that a nanoscale metallic constriction on a SiO 2 substrate acts like a diffusive conductor with negligible electron-phonon relaxation and non-ideal leads. The non-universal impact of the leads on the achieved thermal bias-which depends on their dimensions, shape and material composition-is hard to minimize, but is possible to accurately calibrate in a properly designed nano-device. Our results allow to reduce the issue of the thermal bias calibration to the knowledge of the heater resistance and pave the way for accurate thermoelectric or similar measurements at the nanoscale.

A classical battery converts chemical energy into a persistent voltage bias that can power electronic circuits. Similarly, a phase battery is a quantum device that provides a persistent phase bias to the wave function of a quantum circuit. It represents a key element for quantum technologies based on phase coherence. Here we demonstrate a phase battery in a hybrid superconducting circuit. It consists of an n-doped InAs nanowire with unpaired-spin surface states, that is proximitized by Al superconducting leads. We find that the ferromagnetic polarization of the unpaired-spin states is efficiently converted into a persistent phase bias φ 0 across the wire, leading to the anomalous Josephson effect 1,2 . We apply an external in-plane magnetic field and, thereby, achieve continuous tuning of φ 0 . Hence, we can charge and discharge the quantum phase battery. The observed symmetries of the anomalous Josephson effect in the vectorial magnetic field are in agreement with our theoretical model. Our results demonstrate how the combined action of spin-orbit coupling and exchange interaction induces a strong coupling between charge, spin and superconducting phase, able to break the phase rigidity of the system.

We report results on the control of barrier transparency in InAs/InP nanowire quantum dots via the electrostatic control of the device electron states. Recent works demonstrated that barrier transparency in this class of devices displays a general trend just depending on the total orbital energy of the trapped electrons. We show that a qualitatively different regime is observed at relatively low filling numbers, where tunneling rates are rather controlled by the axial configuration of the electron orbital. Transmission rates versus filling are further modified by acting on the radial configuration of the orbitals by means of electrostatic gating, and the barrier transparency for the various orbitals is found to evolve as expected from numerical simulations. The possibility to exploit this mechanism to achieve a controlled continuous tuning of the tunneling rate of an individual Coulomb blockade resonance is discussed.

The growth mechanisms of self-catalyzed InAs/InSb axial nanowire heterostructures are thoroughly investigated as a function of the In and Sb line pressures and growth time. Some interesting phenomena are observed and analyzed. In particular, the presence of In droplet on top of InSb segment is shown to be essential for forming axial heterostructures in the self-catalyzed vapor-liquid-solid mode. Axial versus radial growth rates of InSb segment are investigated under different growth conditions and described within a dedicated model containing no free parameters. It is shown that widening of InSb segment with respect to InAs stem is controlled by the vapor-solid growth on the nanowire sidewalls rather than by the droplet swelling. The In droplet can even shrink smaller than the nanowire facet under Sb-rich conditions. These results shed more light on the growth mechanisms of self-catalyzed heterostructures and give clear route for engineering the morphology of InAs/InSb axial nanowire heterostructures for different applications.

With downscaling of electronic circuits, components based on semiconductor quantum dots are assuming increasing relevance for future technologies. Their response under external stimuli intrinsically depend on their quantum properties. Here we investigate single-electron tunneling in hard-wall InAs/InP nanowires in the presence of an off-resonant microwave drive. Our heterostructured nanowires include InAs quantum dots (QDs) and exhibit different tunnel-current regimes. In particular, for source-drain bias up to few mV Coulomb diamonds spread with increasing contrast as a function of microwave power and present multiple current polarity reversals. This behavior can be modelled in terms of voltage fluctuations induced by the microwave field and presents features that depend on the interplay of the discrete energy levels that contribute to the tunneling process.

We present a comprehensive electrical characterization of an InAs/InP nanowire (NW) heterostructure, comprising of two InP barriers forming a quantum dot (QD), two adjacent lead segments and two metallic contacts. We demonstrate how to extract valuable quantitative information of the QD. The QD shows very regular Coulomb blockade resonances over a large gate voltage range. By analyzing the resonance line shapes, we map the evolution of the tunnel couplings from the few to the many electron regime, with electrically tunable tunnel couplings from <1 μeV to >600 μeV, and a transition from the temperature to the lifetime broadened regime. The InP segments form tunnel barriers with almost fully symmetric tunnel couplings and a barrier height of ∼350 meV. All of these findings can be understood in great detail based on the deterministic material composition and geometry. Our results demonstrate that integrated InAs/InP QDs provide a promising platform for electron tunneling spectroscopy in InAs NWs, which can readily be contacted by a variety of superconducting materials to investigate subgap states in proximitized NW regions, or be used to characterize thermoelectric nanoscale devices in the quantum regime.

Random assemblies of vertically aligned core-shell GaAs-AlGaAs nanowires displayed an optical response dominated by strong oscillations of the reflected light as a function of the incident angle. In particular, angle-resolved specular reflectance measurements showed the occurrence of periodic modulations in the polarization-resolved spectra of reflected light for a surprisingly wide range of incident angles. Numerical simulations allowed for identifying the geometrical features of the core-shell nanowires leading to the observed oscillatory effects in terms of core and shell thickness as well as the tapering of the nanostructure. The present results indicate that randomly displaced ensembles of nanoscale heterostructures made of III-V semiconductors can operate as optical metamirrors, with potential for sensing applications.

In this work, we isolate individual wurtzite InAs nanowires and fabricate electrical contacts at both ends, exploiting the single nanostructures as building blocks to realize two different architectures of conductometric sensors: (a) the nanowire is drop-casted onto-supported by-a SiO 2 /Si substrate, and (b) the nanowire is suspended at approximately 250 nm from the substrate. We test the source-drain current upon changes in the concentration of humidity, ethanol, and NO 2 , using synthetic air as a gas carrier, moving a step forward towards mimicking operational environmental conditions. The supported architecture shows higher response in the mid humidity range (50% relative humidity), with shorter response and recovery times and lower detection limit with respect to the suspended nanowire. These experimental pieces of evidence indicate a minor role of the InAs/SiO 2 contact area; hence, there is no need for suspended nanostructures to improve the sensing performance. Moreover, the sensing capability of single InAs nanowires for detection of NO 2 and ethanol in the ambient atmosphere is reported and discussed.

A semiconductor nanowire with strong spin-orbit coupling in proximity to a superconductor is predicted to display Majorana edge states emerging under a properly oriented magnetic field. The experimental investigation of these exotic states requires assessing the one-dimensional (1D) character of the nanowire and understanding the superconducting proximity effect in the presence of a magnetic field. Here, we explore the quasi-ballistic 1D transport regime of an InAs nanowire with Ta contacts. Fine-tuned by means of local gates, the observed plateaus of approximately quantized conductance hide the presence of a localized electron, giving rise to a lurking Coulomb blockade effect and Kondo physics. When Ta becomes superconducting, this local charge causes an unusual, reentrant magnetic field dependence of the supercurrent, which we ascribe to a 0 - π transition. Our results underline the relevant role of unintentional charge localization in the few-channel regime where helical subbands and Majorana quasi-particles are expected to arise.

InP-InAs-InP multi-shell nanowires (NWs) were grown in the wurtzite (WZ) or zincblende (ZB) crystal phase and their photoluminescence (PL) properties were investigated at low temperature (≈6 K) for different measurement geometries. PL emissions from the NWs were carefully studied in a wide energy range from 0.7 to 1.6 eV. The different features observed in the PL spectra for increasing energies are attributed to four distinct emitting domains of these nano-heterostructures: the InAs island (axially grown), the thin InAs capping shell (radially grown), the crystal-phase quantum disks arising from the coexistence of InP ZB and WZ segments in the same NW, and the InP portions of the NW. These results provide a useful frame for the rational implementation of InP-InAs-InP multi-shell NWs containing various quantum confined domains as polychromatic optically active components in nanodevices for quantum information and communication technologies.

We demonstrate high-temperature thermoelectric conversion in InAs/InP nanowire quantum dots by taking advantage of their strong electronic confinement. The electrical conductance G and the thermopower S are obtained from charge transport measurements and accurately reproduced with a theoretical model accounting for the multilevel structure of the quantum dot. Notably, our analysis does not rely on the estimate of cotunnelling contributions, since electronic thermal transport is dominated by multilevel heat transport. By taking into account two spin-degenerate energy levels we are able to evaluate the electronic thermal conductance K and investigate the evolution of the electronic figure of merit ZT as a function of the quantum dot configuration and demonstrate ZT ≈ 35 at 30 K, corresponding to an electronic efficiency at maximum power close to the Curzon-Ahlborn limit.

The steady-state chemical composition of the In/Au alloy nanoparticles (NPs) during isothermal growth of Au-assisted InAs and InP nanowires (NWs) is different for the two materials. Therefore, when switching from one material to the other, to grow axial NW heterostructures, transient effects dominate during the time period of the NP reconfiguration. As a consequence, the precise control of the thickness of thin InP and InAs segments, which is fundamental for the realization of quantum dot (QD) structures and superlattices, can be very challenging. In this work, we present a study of the thickness/diameter dependence of two InP barriers and of the InAs short segment in between (QD), inserted into InAs NWs grown by means of Au-assisted chemical beam epitaxy. We found a broad variability of the InP segment thickness within the same as-grown sample, resulting in InAs NWs with asymmetric and non-homogeneous InP barriers. We explain the results by considering the NP reconfiguration dynamics which dominates at the early stages of the growth in both growth sequences. Moreover, we propose a strategy to control the growth rate and the dynamics of the barriers, by forcing the NP reconfiguration before starting the InP growth. This allows for the realization of InAs/InP NW heterostructures of different diameters, all having symmetric InP barriers with well controlled thickness, which are crucial parameters for the realization of advanced electronic quantum devices.

Semiconductor nanowires featuring strong spin-orbit interactions (SOI), represent a promising platform for a broad range of novel technologies, such as spintronic applications or topological quantum computation. However, experimental studies into the nature and the orientation of the SOI vector in these wires remain limited despite being of upmost importance. Typical devices feature the nanowires placed on top of a substrate which modifies the SOI vector and spoils the intrinsic symmetries of the system. In this work, we report experimental results on suspended InAs nanowires, in which the wire symmetries are fully preserved and clearly visible in transport measurements. Using a vectorial magnet, the nontrivial evolution of weak antilocalization (WAL) is tracked through all 3D space, and both the spin-orbit length l SO and coherence length l φ are determined as a function of the magnetic field magnitude and direction. Studying the angular maps of the WAL signal, we demonstrate that the average SOI within the nanowire is isotropic and that our findings are consistent with a semiclassical quasi-1D model of WAL adapted to include the geometrical constraints of the nanostructure. Moreover, by acting on properly designed side gates, we apply an external electric field introducing an additional vectorial Rashba spin-orbit component whose strength can be controlled by external means. These results give important hints on the intrinsic nature of suspended nanowire and can be interesting for the field of spintronics as well as for the manipulation of Majorana bound states in devices based on hybrid semiconductors.

With the increasing interest in the potential benefits of nanotechnologies, concern is still growing that they may present emerging risks for workers. Various strategies have been developed to assess the exposure to nano-objects and their agglomerates and aggregates (NOAA) in the workplace, integrating different aerosol measurement instruments and taking into account multiple parameters that may influence NOAA toxicity. The present study proposes a multi-metric approach for measuring and sampling NOAA in the workplace, applied to three case studies in laboratories each dedicated to materials with different shapes and dimensionalities: graphene, nanowires, and nanoparticles. The study is part of a larger project with the aim of improving risk management tools in nanomaterials research laboratories. The harmonized methodology proposed by the Organization for Economic Cooperation and Development (OECD) has been applied, including information gathering about materials and processes, measurements with easy-to-use and hand-held real-time devices, air sampling with personal samplers, and off-line analysis using scanning electron microscopy. Significant values beyond which an emission can be attributed to the NOAA production process were identified by comparison of the particle number concentration (PNC) time series and the corresponding background levels in the three laboratories. We explored the relations between background PNC and microclimatic parameters. Morphological and elemental analysis of sampled filters was done to identify possible emission sources of NOAA during the production processes: rare particles, spherical, with average diameter similar to the produced NOAA were identified in the nanoparticles laboratory, so further investigation is recommended to confirm the potential for worker exposure. In conclusion, the information obtained should provide a valuable basis for improving risk management strategies in the laboratory at work., Competing Interests: The authors declare no conflict of interest.

The possibility to expand the range of material combinations in defect-free heterostructures is one of the main motivations for the great interest in semiconductor nanowires. However, most axial nanowire heterostructures suffer from interface compositional gradients and kink formation, as a consequence of nanoparticle-nanowire interactions during the metal-assisted growth. Understanding such interactions and how they affect the growth mode is fundamental to achieve a full control over the morphology and the properties of nanowire heterostructures for device applications. Here we demonstrate that the sole parameter affecting the growth mode (straight or kinked) of InP segments on InAs nanowire stems by the Au-assisted method is the nanoparticle composition. Indeed, straight InAs-InP nanowire heterostructures are obtained only when the In/Au ratio in the nanoparticles is low, typically smaller than 1.5. For higher In content, the InP segments tend to kink. Tailoring the In/Au ratio by the precursor fluxes at a fixed growth temperature enables us to obtain straight and radius-uniform InAs-InP nanowire heterostructures (single and double) with atomically sharp interfaces. We present a model that is capable of describing all the experimentally observed phenomena: straight growth versus kinking, the stationary nanoparticle compositions in pure InAs and InAs-InP nanowires, the crystal phase trends, and the interfacial abruptness. By taking into account different nanowire/nanoparticle interfacial configurations (forming wetting or nonwetting monolayers in vertical or tapered geometry), our generalized model provides the conditions of nanoparticle stability and abrupt heterointerfaces for a rich variety of growth scenarios. Therefore, our results provide a powerful tool for obtaining high quality InAs-InP nanowire heterostructures with well-controlled properties and can be extended to other material combinations based on the group V interchange.

Subwavelength nanostructured surfaces are realized with self-assembled vertically-aligned InAs nanowires, and their functionalities as optical reflectors are investigated. In our system, polarization-resolved specular reflectance displays strong modulations as a function of incident photon energy and angle. An effective-medium model allows one to rationalize the experimental findings in the long wavelength regime, whereas numerical simulations fully reproduce the experimental outcomes in the entire frequency range. The impact of the refractive index of the medium surrounding the nanostructure assembly on the reflectance was estimated. In view of the present results, sensing schemes compatible with microfluidic technologies and routes to innovative nanowire-based optical elements are discussed., Competing Interests: The authors declare no conflict of interest.

We investigate the metallic phases observed in hybrid metal-GaAs nanowire devices obtained by controlled thermal annealing of Ni/Au electrodes. Devices are fabricated onto a SiN membrane compatible with transmission electron microscopy studies. Energy dispersive X-ray spectroscopy allows us to show that the nanowire body includes two Ni-rich phases that thanks to an innovative use of electron diffraction tomography can be unambiguously identified as Ni 3 GaAs and Ni 5 As 2 crystals. The mechanisms of Ni incorporation leading to the observed phenomenology are discussed.

The Josephson effect is a fundamental quantum phenomenon where a dissipationless supercurrent is introduced in a weak link between two superconducting electrodes by Andreev reflections. The physical details and topology of the junction drastically modify the properties of the supercurrent and a strong enhancement of the critical supercurrent is expected to occur when the topology of the junction allows an emergence of Majorana bound states. Here we report charge transport measurements in mesoscopic Josephson junctions formed by InAs nanowires and Ti/Al superconducting leads. Our main observation is a colossal enhancement of the critical supercurrent induced by an external magnetic field applied perpendicular to the substrate. This striking and anomalous supercurrent enhancement cannot be described by any known conventional phenomenon of Josephson junctions. We consider these results in the context of topological superconductivity, and show that the observed critical supercurrent enhancement is compatible with a magnetic field-induced topological transition.

Near-field imaging with terahertz (THz) waves is emerging as a powerful technique for fundamental research in photonics and across physical and life sciences. Spatial resolution beyond the diffraction limit can be achieved by collecting THz waves from an object through a small aperture placed in the near-field. However, light transmission through a sub-wavelength size aperture is fundamentally limited by the wave nature of light. Here, we conceive a novel architecture that exploits inherently strong evanescent THz field arising within the aperture to mitigate the problem of vanishing transmission. The sub-wavelength aperture is originally coupled to asymmetric electrodes, which activate the thermo-electric THz detection mechanism in a transistor channel made of flakes of black-phosphorus or InAs nanowires. The proposed novel THz near-field probes enable room-temperature sub-wavelength resolution coherent imaging with a 3.4 THz quantum cascade laser, paving the way to compact and versatile THz imaging systems and promising to bridge the gap in spatial resolution from the nanoscale to the diffraction limit.

We report on the heterogeneous nucleation of catalyst-free InAs nanowires on Si(111) substrates by chemical beam epitaxy. We show that nanowire nucleation is enhanced by sputtering the silicon substrate with energetic particles. We argue that particle bombardment introduces lattice defects on the silicon surface that serve as preferential nucleation sites. The formation of these nucleation sites can be controlled by the sputtering parameters, allowing the control of nanowire density in a wide range. Nanowire nucleation is accompanied by unwanted parasitic islands, but careful choice of annealing and growth temperature allows us to strongly reduce the relative density of these islands and to realize samples with high nanowire yield.

We demonstrate tunable bistability and a strong negative differential resistance in InAs/GaSb core-shell nanowire devices embedding a radial broken-gap heterojunction. Nanostructures have been grown using a catalyst-free synthesis on a Si substrate. Current-voltage characteristics display a top peak-to-valley ratio of 4.8 at 4.2 K and 2.2 at room temperature. The Esaki effect can be modulated-or even completely quenched-by field effect, by controlling the band bending profile along the azimuthal angle of the radial heterostructure. Hysteretic behavior is also observed in the presence of a suitable resistive load. Our results indicate that high-quality broken-gap devices can be obtained using Au-free growth.

Au-catalyzed III-V nanowire heterostructures based on the group III interchange usually grow straight only in one of the two growth sequences, whereas the other sequence produces kinked geometries; thus, the realization of double heterostructures remains challenging. Here, we investigate the growth of Au-assisted InAs-GaAs and GaAs-InAs axial nanowire heterostructures. A detailed study of the heterostructure morphology as a function of growth parameters and chemical composition of the catalyst nanoparticle is performed by means of scanning electron microscopy, transmission electron microscopy, and energy-dispersive X-ray analysis. Our results clearly demonstrate that the nanoparticle composition, rather than other growth parameters, as postulated so far, controls the growth mode and the resulting nanowire morphology. Although GaAs easily grows straight on InAs, straight growth of InAs on GaAs is achieved only if the nanoparticle composition is properly tuned. We find that straight InAs segments on GaAs require high group III-to-Au ratios in the nanoparticle (greater than 0.8); otherwise, the droplet wets the sidewalls and the nanowire kinks. We discuss the observed behavior within a theoretical model that relates the nanoparticle stability to the group III-to-Au ratio. Based on this finding, we demonstrate the growth of straight nanowire heterostructures for both sequences. The proposed strategy can be extended to other III-V nanowire heterostructures based on the group III interchange, allowing for straight morphology regardless of the growth sequence, and ultimately for designing nanowire heterostructures with the required properties for different applications.

In this article we demonstrate type-II band alignment at the wurtzite/zinc-blende hetero-interface in InAs polytype nanowires using resonance Raman measurements. Nanowires were grown with an optimum ratio of the above mentioned phases, so that in the electronic band alignment of such NWs the effect of the difference in the crystal structure dominates over other perturbing effects (e.g. interfacial strain, confinement of charge carriers and band bending due to space charge). Experimental results are compared with the band alignment obtained from density functional theory calculations. In resonance Raman measurements, the excitation energies in the visible range probe the band alignment formed by the E 1 gap of wurtzite and zinc-blende phases. However, we expect our claim to be valid also for band alignment near the fundamental gap at the heterointerface.

We present experimental data on the length distributions of InAs nanowires grown by chemical beam epitaxy with Au catalyst nanoparticles obtained by thermal dewetting of Au film, Au colloidal nanoparticles and In droplets. Poissonian length distributions are observed in the first case. Au colloidal nanoparticles produce broader and asymmetric length distributions of InAs nanowires. However, the distributions can be strongly narrowed by removing the high temperature annealing step. The length distributions for the In-catalyzed growth are instead very broad. We develop a generic model that is capable of describing the observed behaviors by accounting for both the incubation time for nanowire growth and secondary nucleation of In droplets. These results allow us to formulate some general recipes for obtaining more uniform length distributions of III-V nanowires.

We investigate light emission from nanoscale point-sources obtained in hybrid metal-GaAs nanowires embedding two sharp axial Schottky barriers. Devices are obtained via the formation of Ni-rich metallic alloy regions in the nanostructure body thanks to a technique of controlled thermal annealing of Ni/Au electrodes. In agreement with recent findings, visible-light electroluminescence can be observed upon suitable voltage biasing of the junctions. We investigate the time-resolved emission properties of our devices and demonstrate an electrical modulation of light generation up to 1 GHz. We explore different drive configurations and discuss the intrinsic bottlenecks of the present device architecture. Our results demonstrate a novel technique for the realization of fast subwavelength light sources with possible applications in sensing and microscopy beyond the diffraction limit.