Search

The application of bio-based biodegradable mulch films in agriculture has raised environmental concerns regarding their potential impacts on adjacent freshwater ecosystems. This study investigated the biodegradation of microplastics derived from a bio-based biodegradable mulch (bio-MPs) and its acute and chronic ecotoxicity considering relevant scenarios (up to 200 and 250 mg/kg of sediment, using pristine and/or UV-aged particles), using the fungus Penicillium brevicompactum and the dipteran Chironomus riparius as model organisms, respectively, due to their ecological relevance in freshwater environments. Fourier-transform infrared spectroscopy analysis suggested changes in the fungus's carbohydrate reserves and bio-MP degradation through the appearance of low molecular weight esters throughout a 28 day biodegradation test. In a short-term exposure (48 h), C. riparius larvae exposed to pristine or UV-aged bio-MPs had up to 2 particles in their gut. Exposure to pristine bio-MPs decreased larval aerobic metabolism (<20 %) and increased neurotransmission (>15 %), whereas exposure to UV-aged bio-MPs activated larval aerobic metabolism (>20 %) and increased antioxidant defences (catalase activity by >30 % and glutathione-s-transferase by >20 %) and neurotransmission (>30 %). Longer-term (28-d) exposure to UV-aged bio-MPs did not affect larval survival and growth nor the dipteran's emergence but increased male numbers (>30 %) at higher concentrations. This study suggests that the selected agricultural bio-based mulch film is prone to biodegradation by a naturally occurring fungus. However, there is a potential for endocrine disruption in the case of prolonged exposures to UV-aged microplastics. This study emphasises the importance of further research to elucidate the potential ecological effects of these plastic products, to ensure effective management practices, and to establish new regulations governing their use., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Author(s). Published by Elsevier B.V. All rights reserved.)

Zalerion maritima is a marine fungus that has been studied for the biodegradation of (micro)plastics. Here, we report the draft genome sequence of strain ATCC 34329, which was shown to have a size of 58.4 Mb, a GC content of 44.39%, and 10,802 predicted genes.

Seaweeds, which have been widely used for human consumption, are considered a potential source of biological compounds, where enzyme-assisted extraction can be an efficient method to obtain multifunctional extracts. Chemical characterization of Sargassum muticum and Osmundea pinnatifida extracts obtained by Alcalase and Viscozyme assisted extraction, respectively, showed an increment of macro/micro elements in comparison to the corresponding dry seaweeds, while the ratio of Na/K decreased in both extracts. Galactose, mannose, xylose, fucose, and glucuronic acid were the main monosaccharides (3.2-27.3 mg/g lyophilized extract ) present in variable molar ratios, whereas low free amino acids content and diversity (1.4-2.7 g/100g protein ) characterized both extracts. FTIR-ATR and 1H NMR spectra confirmed the presence of important polysaccharide structures in the extracts, namely fucoidans from S. muticum or agarans as sulfated polysaccharides from O. pinnatifida . No cytotoxicity against normal mammalian cells was observed from 0 to 4 mg lyophilized extract /mL for both extracts. The comprehensive characterization of the composition and safety of these two extracts fulfils an important step towards their authorized application for nutritional and/or nutraceutical purposes., Competing Interests: The authors declare no conflict of interest.

This work evaluates the degradation of benzoic acid, a tracer from biomass burning, by different oxidation agents (Fe (III); H 2 O 2 ; sunlight; and combinations of the previous ones) in model solutions and in real atmospheric waters. The extent of reactions was assessed by Ultraviolet-Visible and molecular fluorescence spectroscopies. The oxidation of benzoic acid occurred with the chemical oxidants Fe (III), H 2 O 2 , Fe (III) and H 2 O 2 simultaneously in the presence of sunlight, and with Fe (III) and H 2 O 2 simultaneously in the absence of light. The decrease of the pH value from neutral to acid for atmospheric waters generally increased the extent of oxidation. Sunlight was an important oxidation agent, and its combination with chemical oxidants increased the oxidation rate of benzoic acid, possibly due to the photogeneration of hydroxyl radicals. The results also suggested the occurrence of direct and indirect photolysis of benzoic acid in atmospheric waters. Moreover, the oxidation of benzoic acid produced new and more complex chromophoric compounds, which were then degraded. In addition, the nocturnal period is not sufficient for the full degradation of benzoic acid and of the intermediates formed by Fenton-like oxidation. The diurnal period may be enough for their full degradation through photo-Fenton-like oxidation, but this depends on the composition of the atmospheric waters, namely of the chromophoric content. Thus, this study highlights that benzoic acid from biomass burning, and its derivatives, may persist in atmospheric waters for periods of longer than one day, becoming available for other reactions, and may also affect the terrestrial and aquatic ecosystems through the wet depositions., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Microplastics can be present in the environment as manufactured microplastics (known as primary microplastics) or resulting from the continuous weathering of plastic litter, which yields progressively smaller plastic fragments (known as secondary microplastics). Herein, we discuss the numerous issues associated with the analysis of microplastics, and to a less extent of nanoplastics, in environmental samples (water, sediments, and biological tissues), from their sampling and sample handling to their identification and quantification. The analytical quality control and quality assurance associated with the validation of analytical methods and use of reference materials for the quantification of microplastics are also discussed, as well as the current challenges within this field of research and possible routes to overcome such limitations., (Copyright © 2018 Elsevier B.V. All rights reserved.)

High quantities of industrial wastewaters containing a wide range of organic and inorganic pollutants are being directly discharged into the environment, sometimes without proper treatment. Nanotechnology has a tremendous potential improving the existing treatments or even develop new treatment solutions. In this study, nano-TiO 2 or nano-Fe 2 O 3 was used for the photocatalytic treatment of kraft pulp mill effluent and mining effluent. The experiments with the organic effluent lead to reduction percentages of 93.3%, 68.4% and 89.8%, for colour, aromatic compounds and chemical oxygen demand, respectively, when treated with nano-TiO 2 /H 2 O 2 /UV and nano-Fe 2 O 3 /H 2 O 2 /UV, at pH 3.0. Significant removal of metals from the mining effluent was recorded but only for Zn, Al and Cd, the highest removal attained with 1.0 g L -1 of nano-TiO 2 /UV and nano-Fe 2 O 3 /UV. Regarding the toxicity of the organic effluent to Vibrio fischeri, it was reduced with the treatments combining the oxidant and the catalyst. However, for the inorganic effluent, the best reduction was achieved using 1.0 g L -1 of catalyst. In fact, the increase in dose of the catalyst, especially for nano-TiO 2 , enhanced toxicity reduction. Our results have shown that the use of these NMs seemed to be more effective in the organic effluent than in metal-rich effluent.

The environmental monitoring has been one of the priorities at the European and global scale due to the close relationship between the environmental pollution and the human health/socioeconomic development. In this field, the biosensors have been widely employed as cost-effective, fast, in situ, and real-time analytical techniques. The need of portable, rapid, and smart biosensing devices explains the recent development of biosensors with new transduction materials, obtained from nanotechnology, and for multiplexed pollutant detection, involving multidisciplinary experts. This review article provides an update on recent progress in biosensors for the monitoring of air, water, and soil pollutants in real conditions such as pesticides, potentially toxic elements, and small organic molecules including toxins and endocrine disrupting chemicals., Competing Interests: The authors declare no conflict of interest.

Soil salinization, as the combination of primary and secondary events, can adversely affect organisms inhabiting this compartment. In the present study, the effects of increased salinity were assessed in four species of terrestrial fungi: Lentinus sajor caju, Phanerochaete chrysosporium, Rhizopus oryzae and Trametes versicolor. The mycelial growth and biochemical composition of the four fungi were determined under three exposure scenarios: 1) exposure to serial dilutions of natural seawater (SW), 2) exposure to serial concentrations of NaCl (potential surrogate of SW); and 3) exposure to serial concentrations of NaCl after a period of pre-exposure to low levels of NaCl. The toxicity of NaCl was slightly higher than that of SW, for all fungi species: the conductivities causing 50% of growth inhibition (EC 50 ) were within 14.9 and 22.0 mScm -1 for NaCl and within 20.2 and 34.1 mScm -1 for SW. Phanerochaete chrysosporium showed to be the less sensitive species, both for NaCl and SW. Exposure to NaCl caused changes in the biochemical composition of fungi, mainly increasing the production of polysaccharides. When fungi were exposed to SW this pattern of biochemical response was not observed. Fungi pre-exposed to low levels of salinity presented higher EC 50 than fungi non-pre-exposed, though 95% confidence limits overlapped, with the exception of P. chrysosporium. Pre-exposure to low levels of NaCl also induced changes in the biochemical composition of the mycelia of L. sajor caju and R. oryzae, relatively to the respective control. These results suggest that some terrestrial fungi may acquire an increased tolerance to NaCl after being pre-exposed to low levels of this salt, thus, suggesting their capacity to persist in environments that will undergo salinization. Furthermore, NaCl could be used as a protective surrogate of SW to derive safe salinity levels for soils, since it induced toxicity similar or higher than that of SW., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Plastic yearly production has surpassed the 300milliontons mark and recycling has all but failed in constituting a viable solution for the disposal of plastic waste. As these materials continue to accumulate in the environment, namely, in rivers and oceans, in the form of macro-, meso-, micro- and nanoplastics, it becomes of the utmost urgency to find new ways to curtail this environmental threat. Multiple efforts have been made to identify and isolate microorganisms capable of utilizing synthetic polymers and recent results point towards the viability of a solution for this problem based on the biodegradation of plastics resorting to selected microbial strains. Herein, the response of the fungus Zalerion maritimum to different times of exposition to polyethylene (PE) pellets, in a minimum growth medium, was evaluated, based on the quantified mass differences in both the fungus and the microplastic pellets used. Additionally, molecular changes were assessed through attenuated total reflectance Fourier transform Infrared Spectroscopy (FTIR-ATR) and Nuclear Magnetic Resonance (NMR). Results showed that, under the tested conditions, Z. maritimum is capable of utilizing PE, resulting in the decrease, in both mass and size, of the pellets. These results indicate that this naturally occurring fungus may actively contribute to the biodegradation of microplastics, requiring minimum nutrients., (Copyright © 2017 Elsevier B.V. All rights reserved.)

The ocean has been assumed as the main sink of microplastics (MPs), however, soils may also receive MPs from different sources and through different pathways, which may affect the biota and their role in soil functions. To the best of our knowledge, only one study, until now, reported the effects of MPs on the survival and fitness of soil organisms (Lumbricus terrestris). In our study, epigeic earthworms, of the species E. andrei, were exposed to different concentrations of MPs (0, 62.5, 125, 250, 500 and 1000 mg/kg soil dw ) in an OECD artificial soil and tested for reproduction, survival and growth of adults, following a standard protocol. The size of the polyethylene MPs to which earthworms were exposed ranged between 250 and 1000 μm. No significant effects were recorded on survival, number of juveniles and, in the final weight of adult earthworms after 28d of exposure, to the different concentrations of MPs. Nevertheless, FTIR-ATR of earthworms and histopathological analysis of the gut provided evidences of damages and immune system responses to MPs., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Sensors and biosensors have been increasingly used for clinical analysis due to their miniaturization and portability, allowing the construction of diagnostic devices for point-of-care testing. This paper presents an up-to-date overview and comparison of the analytical performance of sensors and biosensors recently used in clinical analysis. This includes cancer and cardiac biomarkers, hormones, biomolecules, neurotransmitters, bacteria, virus and cancer cells, along with related significant advances since 2011. Some methods of enhancing the analytical performance of sensors and biosensors through their figures of merit are also discussed., (© 2016 Elsevier B.V. All rights reserved.)

We provide a state-of-the-art review of the main strategies for the enhancement of analytical performance of sensors using nanomaterials, particularly nanowires and carbon-based materials. We emphasize the way to overcome the problem of device-to-device variation. We discuss the study of the influence of nanomaterial characteristics, sensor dimensions and operational conditions on sensing performance, and the application of appropriate calibration models., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

Leachates derived from landfill constitute a serious environmental concern as a variety of pollutants can leak from the landfill sites with potential risk of groundwater pollution. Benzene, toluene, ethylbenzene, p-xylene, m-xylene and o-xylene (BTEX) are pollutants widely found in landfill leachate and therefore the development of analytical methodologies which can provide a rapid and simple measurement of these compounds is of great interest. This paper reports an optical fibre (OF) sensor for environmental applications, namely for BTEX determination in landfill leachate samples.Firstly the analytical signal of the developed OF sensor was evaluated regarding some operational variables affecting the deposition of the sensitive siloxane film (type of siloxane cladding, deposition technique, number of cycles for deposition, cure temperature and experimental conditions for stabilization) in order to achieve a high sensitivity of the analytical system. Secondly, the OF based sensor was applied to landfill leachate samples for detection and quantification of BTEX. The obtained results have been compared to the ones obtained by the method based on a gas chromatography-flame ionization detector (GC-FID).The developed OF methodology showed notable analytical advantages, such as high analytical sensitivity and accuracy, good linearity and stability of the analytical signal, and detection limits in the order of a few nanograms (raging from 0.9 to 1.4 ng) for BTEX determination.