Search

We demonstrate the use of [2-(9 H -carbazol-9-yl)ethyl]phosphonic acid (2PACz) and [2-(3,6-di- tert -butyl-9 H -carbazol-9-yl)ethyl]phosphonic acid ( t -Bu-2PACz) as anode modification layers in metal-halide perovskite quantum dot light-emitting diodes (QLEDs). Compared to conventional QLED structures with PEDOT:PSS (poly(3,4-ethylenedioxythiophene) polystyrenesulfonate)/PVK (poly(9-vinylcarbazole)) hole-transport layers, the QLEDs made with phosphonic acid (PA)-modified indium tin oxide (ITO) anodes show an over seven-fold increase in brightness, achieving a brightness of 373,000 cd m -2 , one of the highest brightnesses reported to date for colloidal perovskite QLEDs. Importantly, the onset of efficiency roll-off, or efficiency droop, occurs at ∼1000-fold higher current density for QLEDs made with PA-modified anodes compared to control QLEDs made with conventional PEDOT:PSS/PVK hole transport layers, allowing the devices to sustain significantly higher levels of external quantum efficiency at a brightness of >10 5 cd m -2 . Steady-state and time-resolved photoluminescence measurements indicate that these improvements are due to a combination of multiple factors, including reducing quenching of photoluminescence at the PEDOT:PSS interface and reducing photoluminescence efficiency loss at high levels of current density.

In the development of high-performance lithium-ion batteries (LIBs), the design of polymer binders, particularly through manipulation of side-chain chemistry, plays a pivotal role in optimizing electrode stability, ion transport, and adaptability to the volume changes during cycling. In particular, poly[3-(potassium-4-butanoate)thiophene-2,5-diyl] (P3KBT) increases magnetite and silicon capacity and cycling stability. This work explores the impact of polythiophene alkyl sidechain length on anode characteristics, aiming to enhance performance in LIBs. P3KBT and its alkyl chain alternatives, poly[3-(potassium-5-pentanoate)thiophene-2,5-diyl] (P3KPT) and poly[3-(potassium-6-hexanoate)thiophene-2,5-diyl] (P3KHT) were systematically investigated over 300 charge-discharge cycles. The experiments were designed to assess how varying side-chain length affects the stability, ion transport, and capacity retention of the electrodes. The results revealed that P3KHT, with its longer alkyl chain, exhibited superior capacity retention and reduced charge-transfer resistance after 300 cycles compared to its shorter chain analogs. The findings demonstrate that tailored side chains can improve ion transport, structural integrity, and capacity retention, addressing critical challenges in LIBs such as capacity fade and electrode degradation. This research contributes to the development of next-generation LIBs with enhanced performance and reliability.

Organic mixed ionic-electronic conductors (OMIECs) have garnered significant attention due to their capacity to transport both ions and electrons, making them ideal for applications in energy storage, neuromorphics, and bioelectronics. However, charge compensation mechanisms during the polymer redox process remain poorly understood, and are often oversimplified as single-ion injection with little attention to counterion effects. To advance understanding and design strategies toward next-generation OMIEC systems, a series of p-channel carboxylated mixed conductors is investigated. Varying side-chain functionality, distinctive swelling character is uncovered during electrochemical doping/dedoping with model chao-/kosmotropic electrolytes. Carboxylic acid functionalized polymers demonstrate strong deswelling and mass reduction during doping, indicating cation expulsion, while ethoxycarbonyl counterparts exhibit prominent mass increase, pointing to an anion-driven doping mechanism. By employing operando grazing incidence X-ray fluorescence (GIXRF), it is revealed that the carboxyl functionalized polymer engages in robust cation interaction, whereas ester functionalization shifts the mechanism towards no cation involvement. It is demonstrated that cations are pivotal in mitigating swelling by counterbalancing anions, enabling efficient anion uptake without compromising performance. These findings underscore the transformative influence of functionality-driven factors and side-chain chemistry in governing ion dynamics and conduction, providing new frameworks for designing OMIECs with enhanced performance and reduced swelling., (© 2024 The Author(s). Advanced Materials published by Wiley‐VCH GmbH.)

With the promotion of portable energy storage devices and the popularization of electric vehicles, lithium-ion battery (LiB) technology plays a crucial role in modern energy storage systems. Over the past decade, the demands for LiBs have centered around high energy density and long cycle life. These parameters are often determined by the characteristics of the active materials in the electrodes. Given its high abundance, environmental friendliness, low cost and high capacity, magnetite (Fe 3 O 4 ) emerges as a promising anode material. However, the practical application of Fe 3 O 4 faces challenges, such as significant volume expansion during cycling. To overcome these obstacles and facilitate the commercialization of Fe 3 O 4 , a comprehensive understanding of its properties and behavior is essential. This review provides an overview of recent Fe 3 O 4 research advances, focusing on its synthesis, factors influencing its electrochemical performance, and characterization techniques. By thoroughly understanding the characteristics of Fe 3 O 4 in LiB applications, we can optimize its properties and enhance its performance, thereby paving the way for its widespread use in energy storage applications. Additionally, the review concludes with perspectives on promoting the commercialization of Fe 3 O 4 in LiBs and future research directions., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

Stress-relieving and electrically conductive single-walled carbon nanotubes (SWNTs) and conjugated polymer, poly[3-(potassium-4-butanoate)thiophene] (PPBT), wrapped silicon microparticles (Si MPs) have been developed as a composite active material to overcome technical challenges such as intrinsically low electrical conductivity, low initial Coulombic efficiency, and stress-induced fracture due to severe volume changes of Si-based anodes for lithium-ion batteries (LIBs). The PPBT/SWNT protective layer surrounding the surface of the microparticles physically limits volume changes and inhibits continuous solid electrolyte interphase (SEI) layer formation that leads to severe pulverization and capacity loss during cycling, thereby maintaining electrode integrity. PPBT/SWNT-coated Si MP anodes exhibited high initial Coulombic efficiency (85%) and stable capacity retention (0.027% decay per cycle) with a reversible capacity of 1894 mA h g -1 after 300 cycles at a current density of 2 A g -1 , 3.3 times higher than pristine Si MP anodes. The stress relaxation and underlying mechanism associated with the incorporation of the PPBT/SWNT layer were interpreted by quasi-deterministic and quantitative stress analyses of SWNTs through in situ Raman spectroscopy. PPBT/SWNT@Si MP anodes can maintain reversible stress recovery and 45% less variation in tensile stress compared with SWNT@Si MP anodes during cycling. The results verify the benefits of stress relaxation via a protective capping layer and present an efficient strategy to achieve long cycle life for Si-based anodes for next-generation LIBs., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

Polymer semiconductor/insulator blends offer a promising avenue to achieve desired mechanical properties, environmental stability, and high device performance in organic field-effect transistors. A comprehensive understanding of process-structure-property relationships necessitates a thorough exploration of the composition space to identify transitions in performance, morphology, and phase behavior. Hence, this study employs a high-throughput gradient thin film library, enabling rapid and continuous screening of composition-morphology-device performance relationships in conjugated polymer blends. Applied to a donor-acceptor copolymer blend, this technique efficiently surveys a broad composition range, capturing trends in device performance across the gradient. Furthermore, characterizing the gradient library using microscopy and depth profiling techniques pinpointed composition-dependent transitions in morphology. To validate the results and gain deeper insights, uniform-composition experiments were conducted on select compositions within and outside the gradient range. Depth profiling experiments on the constant composition films unveil the presence of the semiconducting polymer at the air interface, with apparent enrichment of the semiconductor at the substrate interface at low ratios of the semiconducting component, transitioning to a more even distribution within the bulk of the film at higher ratios. The generalizability of the gradient approach was further confirmed by its application to a homopolymer under different solution processing conditions., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

Bound and unbound Frenkel-exciton pairs are essential transient precursors for a variety of photophysical and biochemical processes. In this work, we identify bound and unbound Frenkel-exciton complexes in an electron push-pull polymer semiconductor using coherent two-dimensional spectroscopy. We find that the dominant A 0-1 peak of the absorption vibronic progression is accompanied by a subpeak, each dressed by distinct vibrational modes. By considering the Liouville pathways within a two-exciton model, the imbalanced cross-peaks in one-quantum rephasing and nonrephasing spectra can be accounted for by the presence of pure biexcitons. The two-quantum nonrephasing spectra provide direct evidence for unbound exciton pairs and biexcitons with dominantly attractive force. In addition, the spectral features of unbound exciton pairs show mixed absorptive and dispersive character, implying many-body interactions within the correlated Frenkel-exciton pairs. Our work offers novel perspectives on the Frenkel-exciton complexes in semiconductor polymers.

Propelled by the widespread adoption of portable electronic devices, electrochemical energy storage systems, particularly lithium-ion batteries (LIBs), have become ubiquitous in modern society. The electrode is the critical battery component, where intricate interactions between the materials govern both the energy output and the overall lifespan of the battery under operational conditions. However, the poor interfacial properties of traditional electrode materials fall short in meeting escalating performance demands. To facilitate the advent of next-generation lithium-ion batteries, attention must be devoted to the interfacial chemistry that dictates and modulates the various dynamic and transport processes across multiple length scales within the composite electrodes. Recent research has concentrated on systematically understanding the properties of distinct electrode components to engineer meticulously tailored electrode formulations. These are geared towards composite electrodes with heightened chemical stability, thermal robustness, enhanced local conductivities, and superior mechanical resilience. This review elucidates the latest advances in understanding the impact of interfacial interactions in achieving high-capacity, high-stability electrodes. Through comprehensive insights into the interfacial interactions between the various electrode components, we can create improved integrated systems that outperform those developed through empirical methods. In light of this, the adoption of a holistic approach to enhance the interactions among electrode materials becomes of paramount importance. This concerted effort ensures the attainment of heightened rate capability, facilitation of lithium-ion transport, and overall system stability throughout the entirety of the cyclic process.

Exciton-exciton annihilation is a ubiquitous nonlinear dynamic phenomenon in materials hosting Frenkel excitons. In this work, we investigate the nonlinear exciton dynamics of an electron push-pull conjugated polymer by fluence-dependent transient absorption and excitation-correlation photoluminescence spectroscopy, where we can quantitatively show the latter to be a more selective probe of the nonlinear dynamics. Simulations based on a time-independent exciton annihilation model show a decreasing trend for the extracted annihilation rates with excitation fluence. Further investigation of the fluence-dependent transients suggests that the exciton-exciton annihilation bimolecular rates are not constant in time, displaying a t -1/2 time dependence, which we rationalize as reflective of one-dimensional exciton diffusion, with a diffusion length estimated to be 9 ± 2 nm. In addition, exciton annihilation gives rise to a long-lived species that recombines on a nanosecond time scale. Our conclusions shed broad light onto nonlinear exciton dynamics in push-pull conjugated polymers.

Linear and nonlinear optical line shapes reveal details of excitonic structure in polymer semiconductors. We implement absorption, photoluminescence, and transient absorption spectroscopies in DPP-DTT, an electron push-pull copolymer, to explore the relationship between their spectral line shapes and chain conformation, deduced from resonance Raman spectroscopy and from ab initio calculations. The viscosity of precursor polymer solutions before film casting displays a transition that suggests gel formation above a critical concentration. Upon crossing this viscosity deflection concentration, the line shape analysis of the absorption spectra within a photophysical aggregate model reveals a gradual increase in interchain excitonic coupling. We also observe a red-shifted and line-narrowed steady-state photoluminescence spectrum along with increasing resonance Raman intensity in the stretching and torsional modes of the dithienothiophene unit, which suggests a longer exciton coherence length along the polymer-chain backbone. Furthermore, we observe a change of line shape in the photoinduced absorption component of the transient absorption spectrum. The derivative-like line shape may originate from two possibilities: a new excited-state absorption or Stark effect, both of which are consistent with the emergence of a high-energy shoulder as seen in both photoluminescence and absorption spectra. Therefore, we conclude that the exciton is more dispersed along the polymer chain backbone with increasing concentrations, leading to the hypothesis that polymer chain order is enhanced when the push-pull polymers are processed at higher concentrations. Thus, tuning the microscopic chain conformation by concentration would be another factor of interest when considering the polymer assembly pathways for pursuing large-area and high-performance organic optoelectronic devices., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

Contemporary design principles for organic mixed ionic electronic conductors (OMIECs) are mostly based on the ethylene glycol moiety, which may not be representative of the OMIEC class as a whole. Furthermore, glycolated polymers can be difficult to synthesize and process effectively. As an emerging alternative, we present a series of polythiophenes functionalized with a hybrid carboxyl-alkyl side chain. By variation of the alkyl spacer length, a comprehensive evaluation of both the impact of carboxylic acid functionalization and alkyl spacer length was conducted. COOH-functionalization endows the polymer with preferential intrinsic low-swelling behavior and water processability to yield solvent-resistant conjugated polyelectrolytes while retaining substantial electroactivity in aqueous environments. Advanced in situ techniques, including time-resolved spectroelectrochemistry and Raman spectroscopy, are used to interrogate the materials' microstructure, ionic-electronic coupling, and operational stability in devices. To compare these materials' performance to state-of-the-art technology for the design of OMIECs, we benchmarked the materials and demonstrated significant application potential in both planar and interdigitated organic electrochemical transistors (OECTs). The polythiophene bearing carboxyl-butyl side chains exhibits greater electrochemical performance and faster doping kinetics within the polymer series, with a record-high OECT performance among conjugated polyelectrolytes ([μ C *] pOECT = 107 ± 4 F cm -1 V -1 s -1 ). The results provide an enhanced understanding of structure-property relationships for conjugated polyelectrolytes operating in aqueous media and expand the materials options for future OMIEC development. Further, this work demonstrates the potential for conjugated polymers bearing alkyl-COOH side chains as a path toward robust OMIEC designs that may facilitate further facile (bio)chemical functionalization for a range of (bio)sensing applications., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

Polymer-based semiconductors and organic electronics encapsulate a significant research thrust for informatics-driven materials development. However, device measurements are described by a complex array of design and parameter choices, many of which are sparsely reported. For example, the mobility of a polymer-based organic field-effect transistor (OFET) may vary by several orders of magnitude for a given polymer as a plethora of parameters related to solution processing, interface design/surface treatment, thin-film deposition, postprocessing, and measurement settings have a profound effect on the value of the final measurement. Incomplete contextual, experimental details hamper the availability of reusable data applicable for data-driven optimization, modeling (e.g., machine learning), and analysis of new organic devices. To curate organic device databases that contain reproducible and findable, accessible, interoperable, and reusable (FAIR) experimental data records, data ontologies that fully describe sample provenance and process history are required. However, standards for generating such process ontologies are not widely adopted for experimental materials domains. In this work, we design and implement an object-relational database for storing experimental records of OFETs. A data structure is generated by drawing on an international standard for batch process control (ISA-88) to facilitate the design. We then mobilize these representative data records, curated from the literature and laboratory experiments, to enable data-driven learning of process-structure-property relationships. The work presented herein opens the door for the broader adoption of data management practices and design standards for both the organic electronics and the wider materials community., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

The advent of data analytics techniques and materials informatics provides opportunities to accelerate the discovery and development of organic semiconductors for electronic devices. However, the development of engineering solutions is limited by the ability to control thin-film morphology in an immense parameter space. The combination of high-throughput experimentation (HTE) laboratory techniques and data analytics offers tremendous avenues to traverse the expansive domains of tunable variables offered by organic semiconductor thin films. This Perspective outlines the steps required to incorporate a comprehensive informatics methodology into the experimental development of polymer-based organic semiconductor technologies. The translation of solution processing and property metrics to thin-film behavior is crucial to inform efficient HTE for data collection and application of data-centric tools to construct new process-structure-property relationships. We argue that detailed investigation of the solution state prior to deposition in conjunction with thin-film characterization will yield a deeper understanding of the physicochemical mechanisms influencing performance in π-conjugated polymer electronics, with data-driven approaches offering predictive capabilities previously unattainable via traditional experimental means.

Anisotropic stimuli-responsive microgels based upon the cholesteric phase of chitin nanocrystals and N -isopropylacrylamide were designed and synthesized. The cholesteric structure was interrogated, and the texture was shown to directly influence the microgel shape and anisotropy. Changes in the microgel volume led to changes in the texture, where microgels comprising up to six bands exhibited a twisted bipolar texture, while those with greater volumes displayed a concentric-packing structure. As designed, the imprinted cholesteric phase induced an asymmetric response to temperature, leading to a change in shape and optical properties. Furthermore, the cholesteric structure is able to deform, facilitating transport into a small channel. Access to synthetic structures having a self-assembled twisted texture derived from cholesterics embedded within a polymer matrix will provide guidelines for designing biopolymer composites with programmable motion.

Perovskite solar cells have emerged as a promising next-generation electrical power generating tool. However, imperfections in perovskite films are one of the crucial factors preventing the commercialization of perovskite solar cells. Passivation has proven to be an effective strategy to reduce the density of defect states in perovskite crystals and inhibit ion migration. Although significant work on chloride ion and N , N -dimethylformamide (DMF) has shown that the additives are able to passivate different types of trap defects, systematic studies on the effects of DMF and HCl on perovskite crystallization when used in conjunction with each other are elusive. Here, we systematically investigated the synergistic effect of DMF and hydrochloric acid (HCl) on methylammonium (MA + )-based perovskite films with the two-step spin-coating method. As a Lewis base, DMF coordinates well with Pb 2+ to facilitate a decrease in the number of defects, thereby improving the carrier separation and transport, while HCl improves the overall perovskite film morphology. Addition of 20 μL HCl/20 μL DMF to 10 mL of methylammonium iodide/isopropyl alcohol solution afforded ca. 500 nm thick perovskite films with no observable defects within the grains. The process allowed fabrication of devices with an active area of 0.16 cm 2 , which produced power conversion efficiencies up to 18.37% with minimal hysteresis., Competing Interests: The authors declare no competing financial interest., (© 2020 American Chemical Society.)

Hydrogel optical light-guides have received substantial interest for applications such as deep-tissue biosensors, optogenetic stimulation and photomedicine due to their biocompatibility, (micro)structure control and tissue-like Young's modulus. However, despite recent developments, large-scale fabrication with a continuous synthetic methodology, which could produce core-sheath hydrogel fibers with the desired optical and mechanical properties suitable for deep-tissue applications, has yet to be achieved. In this study, we report a versatile concept of integrated light-triggered dynamic wet spinning capable of continuously producing core-sheath hydrogel optical fibers with tunable fiber diameters, and mechanical and optical propagation properties. Furthermore, this concept also exhibited versatility for various kinds of core-sheath functional fibers. The wet spinning synthetic procedure and fabrication process were optimized with the rational design of the core/sheath material interface compatibility [core = poly(ethylene glycol diacrylate- co -acrylamide); sheath = Ca-alginate], optical transparency, refractive index and spinning solution viscosity. The resulting hydrogel optical fibers exhibited desirable low optical attenuation (0.18 ± 0.01 dB cm -1 with 650 nm laser light), excellent biocompatibility and tissue-like Young's modulus (<2.60 MPa). The optical waveguide hydrogel fibers were successfully employed for deep-tissue cancer therapy and brain optogenetic stimulation, confirming that they could serve as an efficient versatile tool for diverse deep-tissue therapy and brain optogenetic applications., (© The Author(s) 2020. Published by Oxford University Press on behalf of China Science Publishing & Media Ltd.)

Regular microstructures can improve the electrical and optical characteristics of perovskite single crystals because of the removal of defects and grain boundaries. Microstructured single crystals are commonly fabricated by either rigid or flexible templates. However, rigid templates usually need surface treatment before crystal fabrication to create an antiadhesion layer, while flexible templates encounter difficulties in achieving a large area of uniform single crystals without any deformation. In this work, we present a facile and robust method to fabricate perovskite single crystals using rigid silicon pillars coated with flexible polymer solutions, in which surface treatment is avoided in the preparation process, and deformation is absent in the formed crystals. The method realized the fabrication of colorful concentric-ring patterns composed of nanoscale single crystals for the first time. In order to concisely control the preparation of the template, the Newton's ring phenomenon was used to value the droplet height because the number of rings changed with the optical path difference. A related digital simulation was performed to find the correlation of the Newton's ring pattern with the shape of the droplets. The simulated results were consistent with the experimental observations generally, indicating that the pattern could be controlled mechanically. Concomitantly, the resulting perovskite nanoscale single crystals formed a regular colorful concentric-ring pattern. By changing the design of the rigid templates, the parameters of the fabrication process, or the selection of the coating polymer solution, different ring-patterned single crystals were successfully prepared without surface treatment and deformation. The crystals have potential applications in lasers or photodetectors.

While the focus of research related to the design of robust, high-performance Li-ion batteries relates primarily to the synthesis of active particles, the binder plays a crucial role in stability and ensures electrode integrity during volume changes that occur with cycling. Conventional polymeric binders such as poly(vinylidene difluoride) generally do not interact with active particle surfaces and fail to accommodate large changes in particle spacing during cycling. Thus, attention is now turning toward the exploration of interfacial interactions between composite electrode constituents as a key element in ensuring electrode stability. Recently, a poly[3-(potassium-4-butanoate)thiophene] (PPBT) binder component, coupled with a polyethylene glycol (PEG) surface coating for the active material was demonstrated to enhance both electron and ion transport in magnetite-based anodes, and it was established that the PEG/PPBT approach aids in overall battery electrode performance. Herein, the PEG/PPBT system is used as a model polymeric binder for understanding cation effects in anode systems. As such, the potassium ion was replaced with sodium, lithium, hydrogen, and ammonium through ion exchange. The potassium salt exhibited the most stable electrochemical performance, which is attributed to the cation size and resultant electrode morphology that facilitates ion transport. The lithium analogue demonstrated an initial increase in capacity but was unable to maintain this performance over 100 cycles; while the sodium-based system exhibited initially lower capacity as a result of slow reaction kinetics, which increased as cycling progressed. The parent carboxylic acid polymer and its ammonium salt were notably inferior. The results exploring the effect of ion exchange creates a framework for understanding how cations associated directly with the polymer impact electrochemical performance and aid in the overall design of binders for composite Li-ion battery anodes.

Rational design and construction of effective silicon (Si) electrode structures to relieve large volumetric changes that occur during the charge/discharge process remain significant challenges for the development of robust lithium-ion batteries (LIBs). Herein, we propose an electrically conductive poly[3-(potassium-4-butanoate)thiophene] (PPBT) capping layer on the Si surface (Si@PPBT) to serve as the active material and be used in conjunction with a common polymer binder as an approach to tackle issues emanating from volumetric changes. The PPBT protective shell layer provides the system with tolerance toward variations in active material volume during cycling, improves the dispersion of Si nanoparticles in the binder, enhances the electrolyte uptake rate, and provides a strong adhesion force between the Si/carbon additives/current collector, thereby helping to maintain electrode integrity during the charge/discharge process. The π-conjugated polythiophene backbone structure also allows the Si core to maintain electrical contact with carbon additives and/or polymer binder, enabling the formation of effective electrical transport bridges and stabilizing solid electrolyte interphase layer growth. The integrated Si@PPBT/carboxymethyl cellulose (CMC) anode exhibited high initial Coulombic efficiency (84.9%), enhanced rate capability performance, and long cycling stability with a reversible capacity of 1793 mA h g -1 after 200 cycles, 3.4 times higher than that of pristine Si anodes with the same CMC binder (528 mA h g -1 ). The results suggest that the Si@PPBT design presents a promising approach to promote the practical use of Si anodes in LIBs, which could be extended to other anode materials exhibiting large volume changes during lithiation/delithiation.

The development of processing methods to precisely control the solution state properties of semiconducting polymers in situ have remained elusive. Herein, a facile solution seed nucleation processing method is presented in which nucleated poly(3-hexylthiophene) (P3HT) solutions are blended with well-solvated, non-nucleated counterparts as a means to promote the formation of interconnected polymer networks. Nucleation and growth of these networks was induced by preprocessing the solution with UV irradiation and subsequent solution aging prior to deposition via blade-coating. This process was adopted for both batch and continuous flow processing. Superior charge carrier (hole) mobilities were observed in samples with nucleated seeds compared to controls with 0% nucleated P3HT and 100% nucleated P3HT. UV-vis spectral analysis identified that an intermediate degree of solution aggregation (15-20%) is most conducive to enhanced charge transport. The role of intrachain and interchain ordering and alignment on the mesoscale and macroscale is characterized via X-ray scattering, atomic force microscopy, and optical microscopy techniques. The results presented here provide a framework to enable in situ control of the nucleation and growth process to achieve targeted solution state properties resulting in reliable and reproducible performance when the solutions are used for device fabrication.

Inducing the self-assembly of π-conjugated polymers into semicrystalline aggregates has been a topic of substantial interest in the field of organic electronics and is typically achieved using energy-intensive solution processing or postfilm deposition methods. Here, we demonstrate the ability of bioderived cellulose nanocrystals (CNCs) to act as structure-directing agents for the conjugated semiconducting polymer, poly(3-hexylthiophene) (P3HT). CNCs were grafted with polystyrene, P3HT or poly( N -isopropylacrylamide), and subsequently blended with P3HT in solution to study the effect on conjugated polymer self-assembly. The presence of polymer-grafted CNCs resulted in an increase in P3HT semicrystalline aggregate formation, the degree of which depended on the surface free energy of the grafted polymer. The time-dependent P3HT aggregation was characterized by UV-vis spectroscopy, and the resulting data was fit to the Avrami crystallization model. The surface energies of each additive were calculated via contact angle measurements and were used to elucidate the mechanism of P3HT aggregation in these blended systems. P3HT aggregation was enhanced by unfavorable polymer-polymer interactions at the CNC surface, and spatial confinement effects that were imposed by phase separation. Finally, films were cast from the P3HT/CNC solutions and their electronic performance was characterized by organic field-effect transistor device measurements. Films containing polymer-grafted CNCs exhibited higher charge-carrier mobilities, in some cases, up to a 6-fold increase. These bioderived particles constituted a significant volume fraction of the deposited P3HT thin films with an increase in performance, showing promise as a method for reducing costs and improving the sustainability of organic electronics.

The stick-slip motion of the triple phase contact line (TCL) has wide applications in inkjet printing, surface coatings, functional material assembly, and device fabrication. Here, for the first time, we report that on an alumina substrate with nanostructures, the stick-slip motion of the advancing TCL during spreading of an emulsion droplet can serve as an effective nanopatterning process. Air enclosed in the substrate nanostructures can be exchanged with liquid during the "stick" phase, resulting in the formation of bubbles arranged in a ring pattern. The process takes place in two stages: rings of air form first and then, as the volume of air increases, they separate into air bubbles as a result of the Plateau Rayleigh instability. During the first stage, the rings form due to the stick-slip of the advancing TCL and are ascribed to hydrogen-bonding interactions. Ultimate bubble size is dependent on the substrate pore dimensions. The process was simulated using finite-element analysis to elucidate the mechanism associated with subsequent bubble formation. The simulations corroborate well with the experimental results. This stick-slip motion of the advancing TCL provides new insights into the phenomena associated with droplet spreading and wetting, and the ability to control the formation of patterned bubbles will be promising in applications ranging from microfluidics to printing of functional materials and devices based on bubble templates and applications requiring submerged hydrophobic surface.

A thermally "switchable" liquid-crystalline (LC) phase is observed in aqueous suspensions of cellulose nanocrystals (CNCs) featuring patchy grafts of the thermoresponsive polymer poly(N-isopropylacrylamide) (PNIPAM). "Patchy" polymer decoration of the CNCs is achieved by preferential attachment of an atom transfer radical polymerization (ATRP) initiator to the ends of the rods and subsequent surface-initiated ATRP. The patchy PNIPAM-grafted CNCs display a higher colloidal stability above the lower critical solution temperature (LCST) of PNIPAM than CNCs decorated with PNIPAM in a brush-like manner. A 10 wt% suspension of the "patchy" PNIPAM-modified CNCs displays birefringence at room temperature, indicating the presence of an LC phase. When heated above the LCST of PNIPAM, the birefringence disappears, indicating the transition to an isotropic phase. This switching is reversible and appears to be driven by the collapse of the PNIPAM chains above the LCST, causing a reduction of the rods' packing density and an increase in translational and rotational freedom. Suspensions of the "brush" PNIPAM-modified CNCs display a different behavior. Heating above the LCST causes phase separation, likely because the chain collapse renders the particles more hydrophobic. The thermal switching observed for the "patchy" PNIPAM-modified CNCs is unprecedented and possibly useful for sensing and smart packaging applications., (© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Understanding the role of the distribution of polymer chain lengths on process-structure-property relationships in semiconducting organic electronics has remained elusive due to challenges in synthesizing targeted molecular weights ( M w ) and polydispersity indices. Here, a facile blending approach of various poly(3-hexylthiophene) (P3HT) molecular weights is used to investigate the impact of the distribution of polymer chain lengths on self-assembly into aggregates and associated charge transport properties. Low and high M w samples were blended to form a highly polydisperse sample which was compared to a similar, medium M w control. Self-assembly was induced by preprocessing the polymer solution with UV irradiation and subsequent solution aging before deposition via blade-coating. Superior charge carrier (hole) mobilities were observed for the blend and control samples. Furthermore, their solution lifetimes exceeded 14 days. UV-vis spectral analysis suggests that low M w P3HT lacks the mesoscale crystallinity required for percolative charge transport. In contrast, when the M w is too high, the polymer rapidly aggregates, leading to paracrystalline disorder and structural inhomogeneity that interrupts charge-transfer pathways. The role of grain boundaries, fibrillar order, and macroscale alignment is characterized via grazing-incidence wide-angle X-ray scattering, atomic force microscopic, and optical microscopic techniques. The results presented here provide additional guidance on the interplay between polymer solubility, self-assembly, network interconnectivity, and charge transport to enable robust polymer ink formulations with reliable and reproducible performance attributes.

One major drawback that prevents the large-scale practical implementation of perovskites is their susceptibility to performance degradation in humid environments. Here, we achieved uniform, stable perovskite films within a polyvinylpyrrolidone (PVP) polymer frame via mild solution processing in ambient air with over 60% relative humidity. In addition to facilitating film formation, the hydrophobic PVP served to protect the perovskite grains from atmospheric moisture. Use of PVP, coupled with optimization of the deposition parameters, provided for compact, smooth, pinhole-free perovskite films that when incorporated into a photovoltaic device exhibited highly reproducible efficiencies in the range of up to 17%. In the absence of encapsulation, the devices exhibited stable performance characteristics during exposure to humid ambient air for 600 h. Furthermore, on flexible substrates, the 8 wt % PVP-perovskite samples provided for device efficiencies of ca. 15%. The devices retained ca. 73% of their efficiency after bending 1000 times with a bending radius of 0.5 cm.

High-efficiency organic solar cells (OSCs) can be produced through optimization of component molecular design, coupled with interfacial engineering and control of active layer morphology. However, vertical stratification of the bulk-heterojunction (BHJ), a spontaneous activity that occurs during the drying process, remains an intricate problem yet to be solved. Routes toward regulating the vertical separation profile and evaluating the effects on the final device should be explored to further enhance the performance of OSCs. Herein, we establish a connection between the material surface energy, absorption, and vertical stratification, which can then be linked to photovoltaic conversion characteristics. Through assessing the performance of temporary, artificial vertically stratified layers created by the sequential casting of the individual components to form a multilayered structure, optimal vertical stratification can be achieved. Adjusting the surface energy offset between the substrate results in donor and acceptor stabilization of that stratified layer. Further, a trade-off between the photocurrent generated in the visible region and the amount of donor or acceptor in close proximity to the electrode was observed. Modification of the substrate surface energy was achieved using self-assembled small molecules (SASM), which, in turn, directly impacted the polymer donor to acceptor ratio at the interface. Using three different donor polymers in conjunction with two alternative acceptors in an inverted organic solar cell architecture, the concentration of polymer donor molecules at the ITO (indium tin oxide)/BHJ interface could be increased relative to the acceptor. Appropriate selection of SASM facilitated a synchronized enhancement in external quantum efficiency and power conversion efficiencies over 10.5%.

Conjugated polymers possessing polar functionalities were shown to effectively anchor single-walled carbon nanotubes (SWNTs) to the surface of high-capacity anode materials and enable the formation of electrical networks. Specifically, poly[3-(potassium-4-butanoate) thiophene] (PPBT) served as a bridge between SWNT networks and various anode materials, including monodispersed Fe 3 O 4 spheres (sFe 3 O 4 ) and silicon nanoparticles (Si NPs). The PPBT π-conjugated backbone and carboxylate (COO-) substituted alkyl side chains, respectively, attracted the SWNT π-electron surface and chemically interacted with active material surface hydroxyl (-OH) species to form a carboxylate bond. Beneficially, this architecture effectively captured cracked/pulverized particles that typically form as a result of repeated active material volume changes that occur during charging and discharging. Thus, changes in electrode thickness were suppressed substantially, stable SEI layers were formed, electrode resistance was reduced, and enhanced electrode kinetics was observed. Together, these factors led to excellent electrochemical performance.

A carbon nanotube (CNT) web electrode comprising magnetite spheres and few-walled carbon nanotubes (FWNTs) linked by the carboxylated conjugated polymer, poly[3-(potassium-4-butanoate) thiophene] (PPBT), was designed to demonstrate benefits derived from the rational consideration of electron/ion transport coupled with the surface chemistry of the electrode materials components. To maximize transport properties, the approach introduces monodispersed spherical Fe 3 O 4 (sFe 3 O 4 ) for uniform Li + diffusion and a FWNT web electrode frame that affords characteristics of long-ranged electronic pathways and porous networks. The sFe 3 O 4 particles were used as a model high-capacity energy active material, owing to their well-defined chemistry with surface hydroxyl (-OH) functionalities that provide for facile detection of molecular interactions. PPBT, having a π-conjugated backbone and alkyl side chains substituted with carboxylate moieties, interacted with the FWNT π-electron-rich and hydroxylated sFe 3 O 4 surfaces, which enabled the formation of effective electrical bridges between the respective components, contributing to efficient electron transport and electrode stability. To further induce interactions between PPBT and the metal hydroxide surface, polyethylene glycol was coated onto the sFe 3 O 4 particles, allowing for facile materials dispersion and connectivity. Additionally, the introduction of carbon particles into the web electrode minimized sFe 3 O 4 aggregation and afforded more porous FWNT networks. As a consequence, the design of composite electrodes with rigorous consideration of specific molecular interactions induced by the surface chemistries favorably influenced electrochemical kinetics and electrode resistance, which afforded high-performance electrodes for battery applications.

The ability to achieve simultaneous intrinsic deformation with fast response in commercially available materials that can safely contact skin continues to be an unresolved challenge for artificial actuating materials. Rather than using a microporous structure, here we show an ambient-driven actuator that takes advantage of inherent nanoscale molecular channels within a commercial perfluorosulfonic acid ionomer (PFSA) film, fabricated by simple solution processing to realize a rapid response, self-adaptive, and exceptionally stable actuation. Selective patterning of PFSA films on an inert soft substrate (polyethylene terephthalate film) facilitates the formation of a range of different geometries, including a 2D (two-dimensional) roll or 3D (three-dimensional) helical structure in response to vapor stimuli. Chemical modification of the surface allowed the development of a kirigami-inspired single-layer actuator for personal humidity and heat management through macroscale geometric design features, to afford a bilayer stimuli-responsive actuator with multicolor switching capability.

High-throughput discovery of process-structure-property relationships in materials through an informatics-enabled empirical approach is an increasingly utilized technique in materials research due to the rapidly expanding availability of data. Here, process-structure-property relationships are extracted for the nucleation, growth, and deposition of semiconducting poly(3-hexylthiophene) (P3HT) nanofibers used in organic field effect transistors, via high-throughput image analysis. This study is performed using an automated image analysis pipeline combining existing open-source software and new algorithms, enabling the rapid evaluation of structural metrics for images of fibrillar materials, including local orientational order, fiber length density, and fiber length distributions. We observe that microfluidic processing leads to fibers that pack with unusually high density, while sonication yields fibers that pack sparsely with low alignment. This is attributed to differences in their crystallization mechanisms. P3HT nanofiber packing during thin film deposition exhibits behavior suggesting that fibers are confined to packing in two-dimensional layers. We find that fiber alignment, a feature correlated with charge carrier mobility, is driven by increasing fiber length, and that shorter fibers tend to segregate to the buried dielectric interface during deposition, creating potentially performance-limiting defects in alignment. Another barrier to perfect alignment is the curvature of P3HT fibers; we propose a mechanistic simulation of fiber growth that reconciles both this curvature and the log-normal distribution of fiber lengths inherent to the fiber populations under consideration.

We demonstrate that homopolypeptides covalently tethered to anisotropically shaped silica particles induce crystalline ordering of representative semiconducting polymers. Films drop-cast from chloroform dispersions of poly(γ-stearyl-l-glutamate) (PSLG) composite particles and poly(3-hexythiophene) (P3HT) led to highly ordered crystalline structures of P3HT. Hydrophobic-hydrophobic interactions between the alkyl side chains of P3HT and PSLG were the main driving force for P3HT chain ordering into the crystalline assemblies. It was found that the orientation of rigid P3HT fibrils on the substrate adopted the directionality of the evaporating front. Regardless of the PSLG-coated particle dimensions used, the drop-cast films displayed patterns that were shaped by the coffee ring and Marangoni effects. PSLG-coated particles of high axial ratio (4.2) were more efficient in enhancing the electronic performance of P3HT than low axial ratio (2.6) homologues. Devices fabricated from the ordered assemblies displayed improved charge-carrier transport performance when compared to devices fabricated from P3HT alone. These results suggest that PSLG can favorably mediate the organization of semiconducting polymers.

The ability to process conjugated polymers via aqueous solution is highly advantageous for reducing the costs and environmental hazards of large scale roll-to-roll processing of organic electronics. However, maintaining competitive electronic properties while achieving aqueous solubility is difficult for several reasons: (1) Materials with polar functional groups that provide aqueous solubility can be difficult to purify and characterize, (2) many traditional coupling and polymerization reactions cannot be performed in aqueous solution, and (3) ionic groups, though useful for obtaining aqueous solubility, can lead to a loss of solid-state order, as well as a screening of any applied bias. As an alternative, we report a multistage cleavable side chain method that combines desirable aqueous processing attributes without sacrificing semiconducting capabilities. Through the attachment of cleavable side chains, conjugated polymers have for the first time been synthesized, characterized, and purified in organic solvents, converted to a water-soluble form for aqueous processing, and brought through a final treatment to cleave the polymer side chains and leave behind the desired electronic material as a solvent-resistant film. Specifically, we demonstrate an organic soluble polythiophene that is converted to an aqueous soluble polyelectrolyte via hydrolysis. After blade coating from an aqueous solution, UV irradiation is used to cleave the polymer's side chains, resulting in a solvent-resistant, electroactive polymer thin film. In application, this process results in aqueous printed materials with utility for solid-state charge transport in organic field effect transistors (OFETs), along with red to colorless electrochromism in ionic media for color changing displays, demonstrating its potential as a universal method for aqueous printing in organic electronics.

Morphology of conjugated polymers is a critical factor that significantly affects intrinsic charge transport characteristics and in turn performance of polymer-based devices. Morphological defects including misaligned crystalline grains and grain boundaries significantly impede efficient charge hopping between transport sites, resulting in degradation of device performance. Therefore, one important challenge is to control morphology of active polymer thin-films for achieving high performance flexible electronic devices. In the past decade, significant progress has been achieved in morphology control of conjugated polymer thin-films using solution-based processing techniques. This review focuses on recent advances in processing strategies that can tune the morphologies and thus impact charge transport properties of conjugated polymer thin films. Of the available processing strategies, polymer solution treatments and film deposition techniques will be mainly highlighted. The correlation between processing conditions, active layer morphologies, and device performance will be also be discussed.

Triplet-fusion-based photon upconversion capsules with ultrathin double shells are developed through a single dripping instability in a microfluidic flow-focusing device. An inner separation layer allows use of a brominated hydrocarbon oil-based fluidic core, demonstrating significantly enhanced upconversion quantum yield. Furthermore, a perfluorinated photocurable monomer serves as a transparent shell phase with remote motion control through magnetic nanoparticle incorporation., (© 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Cellulose nanocrystals (CNCs) are bioderived, rodlike particles that form a chiral nematic liquid crystal (LC) in water. In this work, CNCs were used to induce long-range order in a semiconducting polymer, poly[3-(potassium-4-butanoate) thiophene-2,5-diyl] (PPBT). When mixed with CNCs, it was found that PPBT was incorporated into the liquid crystal "template" to form ordered structures with highly birefringent domains, as observed under polarized light. We show that the π-π interactions between polymer chains, which contribute considerably to the energetics of the semiconducting system, are directly influenced by the presence and packing of the liquid crystal phase. Upon increasing the concentration of CNCs from the isotropic to chiral nematic regime, we observe a bathochromic shift in the UV-vis spectra and the emergence of the 0-0 vibrational peak, suggesting enhanced π-π stacking leading to chain coplanarization. Furthermore, the chiral nature of the PPBT/CNC mixture was evidenced by a negative peak in circular dichroism (CD) spectroscopy, promoting the notion that the polymer chains followed the helicoidal twist of the chiral nematic liquid crystal host. At high temperatures, the peak height ratios and overall intensities of the UV-vis and CD spectra associated with PPBT decreased as the chiral nematic pitch grew larger in size.

As an effective platform to exploit triplet-triplet-annihilation-based photon upconversion (TTA-UC), microcapsules composed of a fluidic UC core and photonic shell are microfluidically prepared using a triple emulsion as the template. The photonic shell consists of cholesteric liquid crystals (CLCs) with a periodic helical structure, exhibiting a photonic band gap. Combined with planar anchoring at the boundaries, the shell serves as a resonance cavity for TTA-UC emission and enables spectral tuning of the UC under low-power-density excitation. The CLC shell can be stabilized by introducing a polymerizable mesogen in the LC host. Because of the microcapsule spherical symmetry, spontaneous emission of the delayed fluorescence is omnidirectionally amplified at the edge of the stop band. These results demonstrate the range of opportunities provided by TTA-UC systems for the future design of low-threshold photonic devices.

Conjugated semiconducting polymers have been the subject of intense study for over two decades with promising advances toward a printable electronics manufacturing ecosystem. These materials will deliver functional electronic devices that are lightweight, flexible, large-area, and cost-effective, with applications ranging from biomedical sensors to solar cells. Synthesis of novel molecules has led to significant improvements in charge carrier mobility, a defining electrical performance metric for many applications. However, the solution processing and thin film deposition of conjugated polymers must also be properly controlled to obtain reproducible device performance. This has led to an abundance of research on the process-structure-property relationships governing the microstructural evolution of the model semicrystalline poly(3-hexylthiophene) (P3HT) as applied to organic field effect transistor (OFET) fabrication. What followed was the production of an expansive body of work on the crystallization, self-assembly, and charge transport behavior of this semiflexible polymer whose strong π-π stacking interactions allow for highly creative methods of structural control, including the modulation of solvent and solution properties, flow-induced crystallization and alignment techniques, structural templating, and solid-state thermal and mechanical processing. This Account relates recent progress in the microstructural control of P3HT thin films through the nucleation, growth, and alignment of P3HT nanofibers. Solution-based nanofiber formation allows one to develop structural order prior to thin film deposition, mitigating the need for intricate deposition processes and enabling the use of batch and continuous chemical processing steps. Fiber growth is framed as a traditional crystallization problem, with the balance between nucleation and growth rates determining the fiber size and ultimately the distribution of grain boundaries in the solid state. Control of nucleation can be accomplished through a sonication-based seeding procedure, while growth can be modulated through supersaturation control via the tuning of solvent quality, the use of UV irradiation or through aging. These principles carry over to the flow-induced growth of P3HT nanofibers in a continuous microfluidic processing system, leading to thin films with significantly enhanced mobility. Further gains can be made by promoting long-range polymer chain alignment, achieved by depositing nanofibers through shear-based coating methods that promote high fiber packing density and alignment. All of these developments in processing were carried out on a standard OFET platform, enabling us to generalize quantitative structure-property relationships from structural data sources such as UV-vis, AFM, and GIWAXS. It is shown that a linear correlation exists between mobility and the in-plane orientational order of nanofibers, as extracted from AFM images using advanced computer vision software developed by our group. Herein, we discuss data-driven approaches to the determination of process-structure-property relationships, as well as the transferability of structural control strategies for P3HT to other conjugated polymer systems and applications.

The resolution of inkjet printing technology is determined by wetting and evaporation processes after the jet drop contacts the substrate. Here, the wetting of different picoliter solubilized polymer droplets jetting onto one-end-closed porous alumina was investigated. The selected polymers are commonly used in inkjet ink. The synergistic effects of the hierarchical structure and substrate surface modification were used to control the behavior of polymer-based ink drops. A model that invokes the effect of surface tension was applied to calculate the amount of polymer solution penetrating into the pores. The calculation corroborates experimental observations and shows that the volume of polymer solution in the pores increases with an increase in pore radius and depth, resulting in less solution remaining on the substrate surface. The structure of the porous substrate coupled with intrinsic polymer properties and surface modifications all contribute to the resolution that can be achieved via inkjet printing.

Liquid crystals can organize dispersed particles into useful and exotic structures. In the case of lyotropic cholesteric polypeptide liquid crystals, polypeptide-coated particles are appealing because the surface chemistry matches that of the polymeric mesogen, which permits a tighter focus on factors such as extended particle shape. The colloidal particles developed here consist of a magnetic and fluorescent cylindrically symmetric silica core with one rounded, almost hemispherical end. Functionalized with helical poly(γ-stearyl-l-glutamate) (PSLG), the particles were dispersed at different concentrations in cholesteric liquid crystals (ChLC) of the same polymer in tetrahydrofuran (THF). Defects introduced by the particles to the director field of the bulk PSLG/THF host led to a variety of phases. In fresh mixtures, the cholesteric mesophase of the PSLG matrix was distorted, as reflected in the absence of the characteristic fingerprint pattern. Over time, the fingerprint pattern returned, more quickly when the concentration of the PSLG-coated particles was low. At low particle concentration the particles were "guided" by the PSLG liquid crystal to organize into patterns similar to that of the re-formed bulk chiral nematic phase. When their concentration increased, the well-dispersed PSLG-coated particles seemed to map onto the distortions in the bulk host's local director field. The particles located near the glass vial-ChLC interfaces were stacked lengthwise into architectures with apparent two-dimensional hexagonal symmetry. The size of these "crystalline" structures increased with particle concentration. They displayed remarkable stability toward an external magnetic field; hydrophobic interactions between the PSLG polymers in the shell and those in the bulk LC matrix may be responsible. The results show that bio-inspired LCs can assemble suitable colloidal particles into soft crystalline structures.

A materials fabrication concept based on a fluid-construction strategy to create three-dimensional (3D) ZnO@ZnS-Ag active nanostructures at arbitrary position within confined microchannels to form an integrated microfluidic surface-enhanced Raman spectroscopy (SERS) system is presented. The fluid-construction process allowed facile construction of the nanostructured substrates, which were shown to possess a substantial number of integrated hot spots that support SERS activity. Finite-difference time-domain (FDTD) analysis suggested that the 3D clustered geometry facilitated hot spot formation. High sensitivity and good recycle performance were demonstrated using 4-mercaptobenzoic acid (4-MBA) and a mixture of Rhodamine 6G (R6G) and 4-MBA as target organic pollutants to evaluate the SERS microfluidic device performance. The 3D clustered nanostructures were also effective in the detection of a representative nerve agent and biomolecule. The results of this investigation provide a materials and process approach to the fabrication of requisite nanostructures for the online detection of organic pollutants, devices for real-time observation of environmental hazards, and personal-health monitoring.

Solution shearing has attracted great interest for the fabrication of robust and reliable, high performance organic electronic devices, owing to applicability of the method to large area and continuous fabrication, as well as its propensity to enhance semiconductor charge transport characteristics. To date, effects of the design of the blade shear features (especially the microfluidic shear design) and the prospect of synergistically combining the shear approach with an alternate process strategy have not been investigated. Here, a generic thin film fabrication concept that enhanced conjugated polymer intermolecular alignment and aggregation, improved orientation (both nanoscale and long-range), and narrowed the π-π stacking distance is demonstrated for the first time. The impact of the design of shearing blade microfluidic channels and synergistic effects of fluid shearing design with concomitant irradiation strategies were demonstrated, enabling fabrication of polymer-based devices with requisite morphologies for a range of applications.

Battery electrodes are complex mesoscale systems comprised of electroactive components, conductive additives, and binders. In this report, methods for processing electrodes with dispersion of the components are described. To investigate the degree of material dispersion, a spin-coating technique was adopted to provide a thin, uniform layer that enabled observation of the morphology. Distinct differences in the distribution profile of the electrode components arising from individual materials physical affinities were readily identified. Hansen solubility parameter (HSP) analysis revealed pertinent surface interactions associated with materials dispersivity. Further studies demonstrated that HSPs can provide an effective strategy to identify surface modification approaches for improved dispersions of battery electrode materials. Specifically, introduction of surfactantlike functionality such as oleic acid (OA) capping and P3HT-conjugated polymer wrapping on the surface of nanomaterials significantly enhanced material dispersity over the composite electrode. The approach to the surface treatment on the basis of HSP study can facilitate design of composite electrodes with uniformly dispersed morphology and may contribute to enhancing their electrical and electrochemical behaviors. The conductivity of the composites and their electrochemical performance was also characterized. The study illustrates the importance of considering electronic conductivity, electron transfer, and ion transport in the design of environments incorporating active nanomaterials.

Low-cost microfluidic devices are desirable for many chemical processes; however, access to robust, inert, and appropriately structured materials for the inner channel wall is severely limited. Here, the shear force within confined microchannels was tuned through control of reactant solution fluid-flow and shown to dramatically impact nano- through microstructure growth. Combined use of experimental results and simulations allowed controlled growth of 3D networked Zn(OH)F nanostructures with uniform pore distributions and large fluid contact areas on inner microchannel walls. These attributes facilitated subsequent preparation of uniformly distributed Pd and PdPt networks with high structural and chemical stability using a facile, in situ conversion method. The advantageous properties of the microchannel based catalytic system were demonstrated using microwave-assisted continuous-flow coupling as a representative reaction. High conversion rates and good recyclability were obtained. Controlling materials nanostructure via fluid-flow-enhanced growth affords a general strategy to optimize the structure of an inner microchannel wall for desired attributes. The approach provides a promising pathway toward versatile, high-performance, and low-cost microfluidic devices for continuous-flow chemical processes.

Very few studies have reported oriented crystallization of conjugated polymers directly in solution. Here, solution crystallization of conjugated polymers in a microfluidic system is found to produce tightly π-stacked fibers with commensurate improved charge transport characteristics. For poly(3-hexylthiophene) (P3HT) films, processing under flow caused exciton bandwidth to decrease from 140 to 25 meV, π-π stacking distance to decrease from 3.93 to 3.72 Å and hole mobility to increase from an average of 0.013 to 0.16 cm(2) V(-1) s(-1), vs films spin-coated from pristine, untreated solutions. Variation of the flow rate affected thin-film structure and properties, with an intermediate flow rate of 0.25 m s(-1) yielding the optimal π-π stacking distance and mobility. The flow process included sequential cooling followed by low-dose ultraviolet irradiation that promoted growth of conjugated polymer fibers. Image analysis coupled with mechanistic interpretation supports the supposition that "tie chains" provide for charge transport pathways between nanoaggregated structures. The "microfluidic flow enhanced semiconducting polymer crystal engineering" was also successfully applied to a representative electron transport polymer and a nonhalogenated solvent. The process can be applied as a general strategy and is expected to facilitate the fabrication of high-performance electrically active polymer devices.

Low-dose UV irradiation of poly(3-hexylthiophene) (P3HT)-insulating polymer (polystyrene (PS) or polyisobutylene (PIB)) blend solutions led to the formation of highly ordered P3HT nanofibrillar structures in solidified thin films. The P3HT nanofibers were effectively interconnected through P3HT islands phase-separated from insulating polymer regions in blend films comprising a relatively low fraction of P3HT. Films prepared with a P3HT content as low as 5 wt % exhibited excellent macroscopic charge transport characteristics. The impact of PS on P3HT intramolecular and intermolecular interactions was systematically investigated. The presence of PS chains appeared to assist in the UV irradiation process of the blend solutions to facilitate molecular interactions of the semiconductor component, and to enhance P3HT chain interactions during spin coating because of relatively unfavorable P3HT-PS chain interactions. However, P3HT lamellar packing was hindered in the presence of PS chains, because of favorable hydrophobic interactions between the P3HT hexyl substituents and the PS chains. As a result, the lamellar packing d-spacing increased, and the coherence length corresponding to the lamellar packing decreased, as the amount of PS in the blend films increased.

Improved organic field-effect transistor (OFET) performance through a polymer-oligomer semiconductor blend approach is demonstrated. Incorporation of 2,5-bis(3-dodecylthiophen-2-yl)thieno[3,2-b]thiophene (BTTT) into poly(3-hexylthiophene) (P3HT) thin films leads to approximately a 5-fold increase in charge carrier mobility, a 10-fold increase in current on-off ratio, and concomitantly, a decreased threshold voltage to as low as 1.7 V in comparison to single component thin films. The blend approach required no pre- and/or post treatments, and processing was conducted under ambient conditions. The correlation of crystallinity, surface morphology and photophysical properties of the blend thin films was systematically investigated via X-ray diffraction, atomic force microscopy and optical absorption measurements respectively, as a function of blend composition. The dependence of thin-film morphology on the blend composition is illustrated for the P3HT:BTTT system. The blend approach provides an alternative avenue to combine the advantageous properties of conjugated polymers and oligomers for optimized semiconductor performance.

The anisotropic assembly of P3HT nanocrystallites into longer nanofibrillar structures was demonstrated via sequential UV irradiation after ultrasonication to the pristine polymer solutions. The morphology of resultant films was studied by atomic force microscopy (AFM), and quantitative analysis of intra- and intermolecular ordering of polymer chains was performed by means of static absorption spectroscopy and quantitative modeling. Consequently, the approach to treat the precursor solution enhanced intra- and intermolecular ordering and reduced the incidence of grain boundaries within P3HT films, which contributed to the excellent charge carrier transport characteristics of the corresponding films (μ ≈ 12.0 × 10(-2) cm(2) V(-1) s(-1) for 96% RR P3HT).

Origins of the irreversible capacity loss were addressed through probing changes in the electronic and structural properties of hollow-structured Co3O4 nanoparticles (NPs) during lithiation and delithiation using electrochemical Co3O4 transistor devices that function as a Co3O4 Li-ion battery. Additive-free Co3O4 NPs were assembled into a Li-ion battery, allowing us to isolate and explore the effects of the Co and Li2O formation/decomposition conversion reactions on the electrical and structural degradation within Co3O4 NP films. NP films ranging between a single monolayer and multilayered film hundreds of nanometers thick prepared with blade-coating and electrophoretic deposition methods, respectively, were embedded in the transistor devices for in situ conduction measurements as a function of battery cycles. During battery operation, the electronic and structural properties of Co3O4 NP films in the bulk, Co3O4/electrolyte, and Co3O4/current collector interfaces were spatially mapped to address the origin of the initial irreversible capacity loss from the first lithiation process. Further, change in carrier injection/extraction between the current collector and the Co3O4 NPs was explored using a modified electrochemical transistor device with multiple voltage probes along the electrical channel.

In-situ photoinduced threshold voltage measurement is a sensitive probe for exploring charge transport and exciton diffusion simultaneously, the main determinants of the power conversion efficiency in organic photovoltaic devices. The exciton diffusion length in a pentacene film deposited onto a C60 -terminated self-assembled monolayer is measured. The methodology and analysis presented here can be applied in the design and engineering of electron/donor acceptor interfaces for photovoltaic devices.., (© 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)