Search

Plastics, fibers and rubber are three mainstream synthetic materials that are essential to our daily lives and contribute significantly to the quality of our lives. The production of the monomers of these synthetic polymers usually involves oxidation or ammoximation reactions of olefins and analogues. However, the utilization of C, O and N atoms in current industrial processes is <80%, which represents the most environmentally polluting processes for the production of basic chemicals. Through innovation and integration of catalytic materials, new reaction pathways, and reaction engineering, the Research Institute of Petroleum Processing, Sinopec Co., Ltd. (RIPP) and its collaborators have developed unique H 2 O 2 -centered oxidation/ammoximation technologies for olefins and analogues, which has resulted in a ¥500 billion emerging industry and driven trillions of ¥s' worth of downstream industries. The chemical and engineering bases of the production technologies mainly involve the integration of slurry-bed reactors and microsphere catalysts to enhance H 2 O 2 production, H 2 O 2 propylene/chloropropylene epoxidation for the production of propylene oxide/epichlorohydrin, and integration of H 2 O 2 cyclohexanone ammoximation and membrane separation to innovate the caprolactam production process. This review briefly summarizes the whole process from the acquisition of scientific knowledge to the formation of an industrial production technology by RIPP. Moreover, the scientific frontiers of H 2 O 2 production and related oxidation/ammoximation processes of olefins and analogues are reviewed, and new technological growth points are envisaged, with the aim of maintaining China's standing as a leader in the development of the science and technologies of H 2 O 2 production and utilization., (© The Author(s) 2024. Published by Oxford University Press on behalf of China Science Publishing & Media Ltd.)

The exfoliation of bulk C 3 N 4 (BCN) into ultrathin layered structure is an effective strategy to boost photocatalytic efficiency by exposing interior active sites and accelerating charge separation and transportation. Herein, we report a novel nitrate anion intercalation-decomposition (NID) strategy that is effective in peeling off BCN into few-layer C 3 N 4 (fl-CN) with tailored thickness down to bi-layer. This strategy only involves hydrothermal treatment of BCN in diluted HNO 3 aqueous solution, followed by pyrolysis at various temperatures. The decomposition of the nitrate anions not only exfoliates BCN and changes the band structure, but also incorporates oxygen species onto fl-CN, which is conducive to O 2 adsorption and hence relevant chemical processes. In photocatalytic O 2 reduction under visible light irradiation, the H 2 O 2 production rate over the optimal fl-CN-530 catalyst is 952 μmol g -1  h -1 , which is 8.8 times that over BCN. More importantly, under full arc irradiation and in the absence of hole scavenger, CH 4 can be photocatalytically oxidized by on-site formed H 2 O 2 and active oxygen species to generate value-added C1 oxygenates with high selectivity of 99.2 % and record-high production rate of 1893 μmol g -1  h -1 among the metal-free C 3 N 4 -based photocatalysts., (© 2024 Wiley‐VCH GmbH.)

Polymeric carbon nitride (PCN) is an important metal-free photocatalyst for visible light-driven hydrogen peroxide (H 2 O 2 ) production from O 2 reduction. Herein, we synthesized the DPCN catalysts possessing nitrogen defects by one-step thermal polymerization of urea in N 2 stream. As compared to the PCN conventionally synthesized in static air, X-ray photoelectrons spectroscopy (XPS) characterization disclosed that there are more pyridinic N defects in the DPCN catalysts, which is attributed to the removal of a proportion of NH 3 released from urea pyrolysis by flowing N 2 . UV-vis diffuse reflectance spectroscopy (UV-vis DRS), Mott-Schottky, steady-state and time-resolved photoluminescence (PL), and electrochemical impedance spectroscopy (EIS) characterizations revealed that the introduction of the nitrogen defects narrows down the band gap, improves the density of the photoexcited charge carriers, prolongs the lifetime of the charge carriers, and enhances the charge transfer efficiency. In visible light-driven photocatalytic O 2 reduction to H 2 O 2 , the optimal DPCN catalyst afforded an activity of 4.35 times that of the PCN catalyst and a H 2 O 2 concentration of 2.83 mmol L -1 after 10 h of visible light irradiation. This one-step thermal polymerization approach is valid when replacing N 2 stream with Ar and He streams., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Inc. All rights reserved.)

Highly effective photocatalysts for the hydrogen-evolution reaction were developed by conferring the linkers of NH 2 -MIL-125(Ti), a metal-organic framework (MOF) constructed from TiO x clusters and 2-aminoterephthalic acid (linkers), with active copper centers. This design enables effective transfer of electrons from the linkers to the transient Cu 2+ /Cu + centers, leading to 7000-fold and 27-fold increase of carrier density and lifetime of photogenerated charges, respectively, as well as high-rate production of H 2 under visible-light irradiation. This work provides a novel design of a photocatalyst for hydrogen evolution using non-noble Cu 2+ /Cu + as co-catalysts., (© 2020 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

We devised iron-based catalysts with honeycomb-structured graphene (HSG) as the support and potassium as the promoter for CO 2 direct hydrogenation to light olefins (CO 2 -FTO). Over the optimal FeK1.5/HSG catalyst, the iron time yield of light olefins amounted to 73 μmol CO2 g Fe -1 s -1 with high selectivity of 59%. No obvious deactivation occurred within 120 h on stream. The excellent catalytic performance is attributed to the confinement effect of the porous HSG on the sintering of the active sites and the promotion effect of potassium on the activation of inert CO 2 and the formation of iron carbide active for CO 2 -FTO.

ε-Iron carbide has been predicted to be promising for low-temperature Fischer-Tropsch synthesis (LTFTS) targeting liquid fuel production. However, directional carbidation of metallic iron to ε-iron carbide is challenging due to kinetic hindrance. Here we show how rapidly quenched skeletal iron featuring nanocrystalline dimensions, low coordination number and an expanded lattice may solve this problem. We find that the carbidation of rapidly quenched skeletal iron occurs readily in situ during LTFTS at 423-473 K, giving an ε-iron carbide-dominant catalyst that exhibits superior activity to literature iron and cobalt catalysts, and comparable to more expensive noble ruthenium catalyst, coupled with high selectivity to liquid fuels and robustness without the aid of electronic or structural promoters. This finding may permit the development of an advanced energy-efficient and clean fuel-oriented FTS process on the basis of a cost-effective iron catalyst.

Herein, we develop a reproducible in situ crystallization route to synthesize uniform functional ZSM-5 microspheres composed of aggregated ZSM-5 nanorods and well-dispersed uniform Fe(3)O(4) nanoparticles (NPs). The growth of such unique microspheres undergoes a NP-assisted recrystallization process from surface to core. The obtained magnetic ZSM-5 microspheres possess a uniform size (6-9 μm), ultrafine uniform Fe(3)O(4) NPs (~10 nm), good structural stability, high surface area (340 m(2)/g), and large magnetization (~8.6 emu/g) and exhibit a potential application in Fischer-Tropsch synthesis.

The application of elaborately designed magnetic catalysts has long been limited to ease their separation from the products only. In this paper, we for the first time employed a magnetic sulphonated poly(styrene-divinylbenzene) resin catalyst on a magnetically stabilized-bed (MSB) reactor to enhance the etherification of fluidized catalytic cracking (FCC) light gasoline, one of the most important reactions in petroleum refining industry. We demonstrated that the catalytic performance of the magnetic acid resin catalyst on the magnetic reactor is substantially enhanced as compared to its performance on a conventional fixed-bed reactor under otherwise identical operation conditions. The magnetic catalyst has the potential to be loaded and unloaded continuously on the magnetic reactor, which will greatly simplify the current complex industrial etherification processes.

Amorphous alloys structurally deviate from crystalline materials in that they possess unique short-range ordered and long-range disordered atomic arrangement. They are important catalytic materials due to their unique chemical and structural properties including broadly adjustable composition, structural homogeneity, and high concentration of coordinatively unsaturated sites. As chemically reduced metal-metalloid amorphous alloys exhibit excellent catalytic performance in applications such as efficient chemical production, energy conversion, and environmental remediation, there is an intense surge in interest in using them as catalytic materials. This critical review summarizes the progress in the study of the metal-metalloid amorphous alloy catalysts, mainly in recent decades, with special focus on their synthetic strategies and catalytic applications in petrochemical, fine chemical, energy, and environmental relevant reactions. The review is intended to be a valuable resource to researchers interested in these exciting catalytic materials. We concluded the review with some perspectives on the challenges and opportunities about the future developments of metal-metalloid amorphous alloy catalysts.

The organization of different nano objects with tunable sizes, morphologies, and functions into integrated nanostructures is critical to the development of novel nanosystems that display high performances in sensing, catalysis, and so on. Herein, using acetylacetone as a chelating agent, phenolic resol as a carbon source, metal nitrates as metal sources, and amphiphilic copolymers as a template, we demonstrate a chelate-assisted multicomponent coassembly method to synthesize ordered mesoporous carbon with uniform metal-containing nanoparticles. The obtained nanocomposites have a 2-D hexagonally arranged pore structure, uniform pore size (~4.0 nm), high surface area (~500 m(2)/g), moderate pore volume (~0.30 cm(3)/g), uniform and highly dispersed Fe(2)O(3) nanoparticles, and constant Fe(2)O(3) contents around 10 wt %. By adjusting acetylacetone amount, the size of Fe(2)O(3) nanoparticles is readily tunable from 8.3 to 22.1 nm. More importantly, it is found that the metal-containing nanoparticles are partially embedded in the carbon framework with the remaining part exposed in the mesopore channels. This unique semiexposure structure not only provides an excellent confinement effect and exposed surface for catalysis but also helps to tightly trap the nanoparticles and prevent aggregating during catalysis. Fischer-Tropsch synthesis results show that as the size of iron nanoparticles decreases, the mesoporous Fe-carbon nanocomposites exhibit significantly improved catalytic performances with C(5+) selectivity up to 68%, much better than any reported promoter-free Fe-based catalysts due to the unique semiexposure morphology of metal-containing nanoparticles confined in the mesoporous carbon matrix.

In the challenging crotonaldehyde hydrogenation to crotyl alcohol, an Ag-In/SBA-15 catalyst fabricated by a modified "two solvents" strategy shows an unprecedentedly high yield of 86% at a selectivity of 87%, which exceeds the best results on Pt-, Au- and other Ag-based heterogeneous catalysts reported so far.

We demonstrate a one-pot hydrothermal cohydrolysis-carbonization process using glucose and iron nitrate as starting materials for the fabrication of carbonaceous spheres embedded with iron oxide nanoparticles. It is verified by TEM, (57)Fe Mossbauer, and Fe K-edge XAS that iron oxide nanoparticles are highly dispersed in the carbonaceous spheres, leading to a unique microstructure. A formation mechanism is also proposed. This route is also applicable to a range of other naturally occurring saccharides and metal nitrates. A catalytic study revealed the remarkable stability and selectivity of the reduced Fe(x)O(y)@C spheres in the Fischer-Tropsch synthesis, which clearly exemplifies the promising application of such materials.

Zeolite analcime with a core-shell and hollow icositetrahedron architecture was prepared by a one-pot hydrothermal route in the presence of ethylamine and Raney Ni. Detailed investigations on samples at different preparation stages revealed that the growth of the complex single crystalline geometrical structure did not follow the classic crystal growth route, i.e., a crystal with a highly symmetric morphology (such as polyhedra) is normally developed by attachment of atoms or ions to a nucleus. A reversed crystal growth process through oriented aggregation of nanocrystallites and surface recrystallization was observed. The whole process can be described by the following four successive steps. (1) Primary analcime nanoplatelets undergo oriented aggregation to yield discus-shaped particles. (2) These disci further assemble into polycrystalline microspheres. (3) The relatively large platelets grow into nanorods by consuming the smaller ones, and meanwhile, the surface of the microspheres recrystallizes into a thin single crystalline icositetrahedral shell via Ostwald ripening. (4) Recrystallization continues from the surface to the core at the expense of the nanorods, and the thickness of the monocrystalline shell keeps on increasing until all the nanorods are consumed, leading to hollow single crystalline analcime icositetrahedra. The present work adds new useful information for the understanding of the principles of zeolite growth.

The size- and composition-controlled synthesis of Ni-P nanospheres from nickel chloride and sodium hypophosphite has been systematically investigated by changing the conditions, such as the ratio of the starting materials, pH value, and reduction temperature. It was found that when the starting ratio of H2PO2(-)/Ni2+ was changed the size and chemical composition of the nanoparticles changed simultaneously. Within a suitable pH range, the phosphorus content was altered without affecting the particle size. Increasing the reduction temperature resulted in smaller Ni-P nanospheres but invariable phosphorus content. The Ni-P nanospheres were amorphous when the phosphorus content was higher than 10.0 mol %, while lower phosphorus content led to a composite of amorphous Ni-P and face-centered cubic (fcc) Ni. During postsynthesis calcinations, amorphous Ni-P nanospheres with a low phosphorus content directly crystallized to Ni3P and fcc Ni. However, the specimens with high phosphorus content crystallized via some intermediate phases such as Ni5P2 and Ni12P5. In the latter, an amorphous P-rich shell was developed simultaneously. A preliminary catalytic test of growth of carbon nanofibers on the Ni-P nanospheres has been carried out.

The desulfurization of thiophene on Raney Ni and rapidly quenched skeletal Ni (RQ Ni) has been studied in ultrahigh vacuum (UHV) by X-ray photoelectron spectroscopy (XPS). The Raney Ni or RQ Ni can be approximated as a hydrogen-preadsorbed polycrystalline Ni-alumina composite. It is found that thiophene molecularly adsorbs on Raney Ni or RQ Ni at 103 K. At 173 K, thiophene on alumina is desorbed, while thiophene in direct contact with the metallic Ni in Raney Ni undergoes C-S bond scission, leading to carbonaceous species most probably in the metallocycle-like configuration and atomic sulfur. On RQ Ni, the temperature for thiophene dissociation is about 100 K higher than that on Raney Ni. The lower reactivity of RQ Ni toward thiophene is tentatively attributed to lattice expansion of Ni crystallites in RQ Ni due to rapid quenching. The existence of alumina and hydrogen may block the further cracking of the metallocycle-like species on Raney Ni and RQ Ni at higher temperatures, which has been the dominant reaction pathway on Ni single crystals. By 473 K, the C 1s peak has disappeared, leaving nickel sulfide on the surface.

Square and round single crystalline SnO platelets have been prepared in a solution-based chemical route aided with sonication at room temperature.

A nanosized amorphous Ni-Cr-B catalyst prepared by the chemical reduction method exhibited superior thermal stability and selectivity in hydrogen peroxide synthesis via the anthraquinone route.