Search

The retinoic acid-inducible gene I (RIG-I) innate immune receptor is an important immunotherapeutic target, but we lack approaches for monitoring the physical basis for its activation in vitro. This gap in our understanding has led to confusion about mechanisms of RIG-I activation and difficulty discovering agonists and antagonists. We therefore created a novel fluorescence resonance energy transfer-based method for measuring RIG-I activation in vitro using dual site-specific fluorescent labeling of the protein. This approach enables us to measure the conformational change that releases the signaling domain during the first step of RIG-I activation, making it possible to understand the role of stimulatory ligands. We have found that RNA alone is sufficient to eject the signaling domain, ejection is reversible, and adenosine triphosphate plays but a minor role in this process. These findings help explain RIG-I dysfunction in autoimmune disease, and they inform the design of therapeutics targeting RIG-I., (Copyright © 2019 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works. Distributed under a Creative Commons Attribution License 4.0 (CC BY).)

Study Question: Can RNA sequencing of human cumulus cells (CC) reveal molecular pathways involved in the physiology of reproductive aging?, Study Finding: Senescent but not young CC activate gene pathways associated with hypoxia and oxidative stress., What Is Known Already: Shifts in socioeconomic norms are resulting in larger numbers of women postponing childbearing. The reproductive potential is sharply decreased with aging, and the reasons are poorly understood. Since CCs play an integral role in oocyte maturation and direct access to human oocytes is limited, we used whole transcriptome analysis of these somatic cells to gain insights into the molecular mechanisms playing a role in follicular senescence., Study Design, Samples/materials, Methods: Twenty CC samples (from a total of 15 patients) were obtained from oocytes of either male factor or egg donor patients. RNA sequencing and bioinformatic tools were used to identify differentially expressed genes between CCs from seven aged and eight young patients (<35 (years old) y.o. vs >40 y.o.). Quantitative-PCR and immunoflourescent staining were used for validation., Main Results and the Role of Chance: RNA sequencing identified 11 572 genes expressed in CC of both age cohorts, 45 of which were differentially expressed. In CC collected from patients >40 y.o., genes involved in the hypoxia stress response (NOS2, RORA and NR4A3), vasculature development (NR2F2, PTHLH), glycolysis (RALGAPA2 and TBC1D4) and cAMP turnover (PDE4D) were significantly overexpressed when compared with CC of patients younger than 35 y.o., Limitations, Reasons for Caution: This study focused almost exclusively on assessing the genetic differences in CC transcriptome between young and older women. These genetic findings were not fully correlated with embryonic development and clinical outcome., Wider Implications of the Findings: Our data provide a new hypothesis-follicular hypoxia-as the main mechanism leading to ovarian follicular senescence and suggest a link between cumulus cell aging and oocyte quality decay. If specific molecular findings of hypoxia would be confirmed also in oocytes, genetic platforms could screen CC for hypoxic damage and identify healthier oocytes. Protocols of ovarian stimulation in older patients could also be adjusted to diminish oocyte exposure time to hypoxic follicles., Large Scale Data: GEO accession number: GSE81579 STUDY FUNDING AND COMPETING INTERESTS: Funded in part by EMD Serono Grant for Fertility Innovation (GFI)., (© The Author 2016. Published by Oxford University Press on behalf of the European Society of Human Reproduction and Embryology. All rights reserved. For Permissions, please email: journals.permissions@oup.com.)

The branch site of group II introns is typically a bulged adenosine near the 3'-end of intron domain 6. The branch site is chosen with extraordinarily high fidelity, even when the adenosine is mutated to other bases or if the typically bulged adenosine is paired. Given these facts, it has been difficult to discern the mechanism by which the proper branch site is chosen. In order to dissect the determinants for branch-point recognition, new mutations were introduced in the vicinity of the branch site and surrounding domains. Single mutations did not alter the high fidelity for proper branch-site selection. However, several combinations of mutations moved the branch site systematically to new positions along the domain 6 stem. Analysis of those mutants, together with a new alignment of domain 5 and domain 6 sequences, reveals a set of structural determinants that appear to govern branch-site selection by group II introns.

Group II introns are well recognized for their remarkable catalytic capabilities, but little is known about their three-dimensional structures. In order to obtain a global view of an active enzyme, hydroxyl radical cleavage was used to define the solvent accessibility along the backbone of a ribozyme derived from group II intron ai5gamma. These studies show that a highly homogeneous ribozyme population folds into a catalytically compact structure with an extensively internalized catalytic core. In parallel, a model of the intron core was built based on known tertiary contacts. Although constructed independently of the footprinting data, the model implicates the same elements for involvement in the catalytic core of the intron.

The mechanism by which group II introns cleave the correct phosphodiester linkage was investigated by studying the reaction of mutant substrates with a ribozyme derived from intron ai5gamma. While fidelity was found to be quite high in most cases, a single mutation on the substrate (+1C) resulted in a dramatic loss of fidelity. When this mutation was combined with a second mutation that induces a bulge in the exon binding site 1/intron binding site 1 (EBS1/IBS1) duplex, the base-pairing register of the EBS1/IBS1 duplex was shifted and the cleavage site moved to a downstream position on the substrate. Conversely, when mismatches were incorporated at the EBS1/IBS1 terminus, the duplex was effectively truncated and cleavage occurred at an upstream site. Taken together, these data demonstrate that the cleavage site of a group II intron ribozyme can be tuned at will by manipulating the thermodynamic stability and structure of the EBS1/IBS1 pairing. The results are consistent with a model in which the cleavage site is not designated through recognition of specific nucleotides (such as the 5'-terminal residue of EBS1). Instead, the ribozyme detects a structure at the junction between single and double-stranded residues on the bound substrate. This finding explains the puzzling lack of phylogenetic conservation in ribozyme and substrate sequences near group II intron target sites., (Copyright 2001 Academic Press.)

All aspects of cellular RNA metabolism and the replication of many viruses require DExH/D proteins that manipulate RNA in a manner that requires nucleoside triphosphates. Although DExH/D proteins have been shown to unwind purified RNA duplexes, most RNA molecules in the cellular environment are complexed with proteins. It has therefore been speculated that DExH/D proteins may also affect RNA-protein interactions. We demonstrate that the DExH protein NPH-II from vaccinia virus can displace the protein U1A from RNA in an active adenosine triphosphate-dependent fashion. NPH-II increases the rate of U1A dissociation by more than three orders of magnitude while retaining helicase processivity. This indicates that DExH/D proteins can effectively catalyze protein displacement from RNA and thereby participate in the structural reorganization of ribonucleoprotein assemblies.

A kinetic characterization is presented for intron insertion into a target duplex DNA site during L1.ltrB intron mobility. This reaction is catalyzed by a ribonucleoprotein particle (RNP), consisting of a lariat form of group II intron RNA and the intron-encoded LtrA protein. In the first stage of intron mobility, the RNA component of the enzyme by itself inserts directly into the target ds DNA site, and thus, the RNP enzyme does not carry out turnover. Using single-turnover kinetics, we established an in vitro kinetic assay system and investigated mechanism of the intron RNA insertion process.

Group II introns are catalytic RNA molecules that require divalent metal ions for folding, substrate binding, and chemical catalysis. Metal ion binding sites in the group II core have now been elucidated by monitoring the site-specific RNA hydrolysis patterns of bound ions such as Tb(3+) and Mg(2+). Major sites are localized near active site elements such as domain 5 and its surrounding tertiary interaction partners. Numerous sites are also observed at intron substructures that are involved in binding and potentially activating the splice sites. These results highlight the locations of specific metal ions that are likely to play a role in ribozyme catalysis.

Group II introns are self-splicing RNAs that are commonly found in the genes of plants, fungi, yeast and bacteria. Little is known about the tertiary structure of group II introns, which are among the largest natural ribozymes. The most conserved region of the intron is domain 5 (D5), which, together with domain 1 (D1), is required for all reactions catalysed by the intron. Despite the importance of D5, its spatial relationship and tertiary contacts to other active-site constituents have remained obscure. Furthermore, D5 has never been placed directly at a site of catalysis by the intron. Here we show that a set of tertiary interactions (lambda-lambda') links catalytically essential regions of D5 and D1, creating the framework for an active-site and anchoring it at the 5' splice site. Highly conserved elements similar to components of the lambda-lambda' interaction are found in the eukaryotic spliceosome.

All aspects of cellular RNA metabolism and processing involve DExH/D proteins, which are a family of enzymes that unwind or manipulate RNA in an ATP-dependent fashion. DExH/D proteins are also essential for the replication of many viruses, and therefore provide targets for the development of therapeutics. All DExH/D proteins characterized to date hydrolyse nucleoside triphosphates and, in most cases, this activity is stimulated by the addition of RNA or DNA. Several members of the family unwind RNA duplexes in an NTP-dependent fashion in vitro; therefore it has been proposed that DExH/D proteins couple NTP hydrolysis to RNA conformational change in complex macromolecular assemblies. Despite the central role of DExH/D proteins, their mechanism of RNA helicase activity remains unknown. Here we show that the DExH protein NPH-II unwinds RNA duplexes in a processive, unidirectional fashion with a step size of roughly one-half helix turn. We show that there is a quantitative connection between ATP utilization and helicase processivity, thereby providing direct evidence that DExH/D proteins can function as molecular motors on RNA.

Solutions to the nonlinear Poisson-Boltzmann equation were used to obtain the electrostatic potentials of RNA molecules that have known three-dimensional structures. The results are described in terms of isopotential contours and surface electrostatic potential maps. Both representations have unexpected features: 'cavities' within isopotential contours and areas of enhanced negative potential on molecular surfaces. Intriguingly, the sites of unusual electrostatic features correspond to functionally important regions, suggesting that electrostatic properties play a key role in RNA recognition and stabilization. These calculations reveal that the electrostatic potentials generated by RNA molecules have a variety of functionally important characteristics that cannot be discerned by simple visual inspection of the molecular structure.

In this study, the thermodynamic properties of substrate-ribozyme recognition were explored using a system derived from group II intron ai5gamma. Substrate recognition by group II intron ribozymes is of interest because any nucleic ac?id sequence can be targeted, the recognition sequence can be quite long (>/=13 bp), and reaction can proceed with a very high degree of sequence specificity. Group II introns target their substrates throug?h the formation of base-pairing interactions with two regions of the intron (EBS1 and EBS2), which are usually located far apart in the secondary structure. These structures pair with adjacent, corresponding sites (IBS1 and IBS2) on the substrate. In order to understand the relative energetic contribution of each base-pairing interaction (EBS1-IBS1 or EBS2-IBS2) to substrate binding energy, the free energy of each helix was measured. The individual helices were found to have base-pairing free energies similar to those calculated for regular RNA duplexes of the same sequence, suggesting that each recognition helix derives its binding energy from base-pairing interactions alone and that each helix can form independently. Most interestingly, it was found that the sum of the measured individual free energies (approximately 20 kcal/mol) was much higher than the known free energy for substrate binding (approximately 12 kcal/mol). This indicates that certain group II intron ribozymes can bind their substrates in an antagonistic fashion, paying a net energetic penalty upon binding the full-length substrate. This loss of binding energy is not due to weakening of individual helices, but appears to be linked to ribozyme conformational changes induced by substrate binding. This coupling between substrate binding and ribozyme conformational rearrangement may provide a mechanism for lowering overall substrate binding energy while retaining the full information content of 13 bp, thus resulting in a mechanism for ensuring sequence specificity., (Copyright 1999 Academic Press.)

Site-specific probes provide a powerful tool for structure and function studies of nucleic acids, especially in elucidating tertiary structures of large ribozymes and other folded RNA molecules. Among many types of extrinsic labels, fluorophores are most attractive because they can provide structural information at millisecond time resolution, thus allowing real-time observation of structural transition during biological function. Methods for introducing fluorophores in RNA molecules are summarized here. These methods are robust and readily applicable to the labeling of other types of probes. However, as each case of RNA modification is unique, fine tuning of the general methodology is beneficial., (Copyright 1999 Academic Press.)

Drawing from the growing database of complex three-dimensional RNA structures, a systematic method has been developed for classifying and analyzing the variety of conformations adopted by nucleic acids. This method is based on the development of a reduced representation for nucleic acid backbone conformation, simplifying the formidable eight-dimensional problem that has long complicated nucleic acid conformational analysis. Two pseudotorsion angles (eta and theta) have been defined, based on the selection of two appropriate pivot points along the RNA backbone, P and C4'. These pseudotorsions, together with a complete library of conventional torsion angles, can be calculated for any RNA structure or all-atom model using a new program called AMIGOS. Having computed eta and theta pseudotorsions for each position on an RNA molecule, they can be represented on a two-dimensional plot similar to the phi-phi plots that have traditionally been used for protein conformational analysis. Like a Ramachandran plot, clusters of residues appear at discrete regions on an eta-theta plot. Nucleotides within these clusters share conformational properties, often belonging to the same type of structural motif such as A-platforms, sheared tandem purine-purine pairs and GNRA tetraloops. An eta-theta plot provides a two-dimensional representation of the conformational properties of an entire RNA molecule, facilitating rapid analysis of structural features. In addition to the utility of eta-theta plots for intuitive visualization of conformational space, the pseudotorsional convention described here should significantly simplify approaches to macromolecular modeling of RNA structure., (Copyright 1998 Academic Press)

Group II introns are self-splicing RNA molecules that are of considerable interest as ribozymes, mobile genetic elements and examples of folded RNA. Although these introns are among the most common ribozymes, little is known about the chemical and structural determinants for their reactivity. By using nucleotide analog interference mapping (NAIM), it has been possible to identify the nucleotide functional groups (Rp phosphoryls, 2'-hydroxyls, guanosine exocyclic amines, adenosine N7 and N6) that are most important for composing the catalytic core of the intron. The majority of interference effects occur in clusters located within the two catalytically essential Domains 1 and 5 (D1 and D5). Collectively, the NAIM results indicate that key tetraloop-receptor interactions display a specific chemical signature, that the epsilon-epsilon' interaction includes an elaborate array of additional features and that one of the most important core structures is an uncharacterized three-way junction in D1. By combining NAIM with site-directed mutagenesis, a new tertiary interaction, kappa-kappa', was identified between this region and the most catalytically important section of D5, adjacent to the AGC triad in stem 1. Together with the known zeta-zeta' interaction, kappa-kappa' anchors D5 firmly into the D1 scaffold, thereby presenting chemically essential D5 functionalities for participation in catalysis.

Group II introns are ribozymes with a complex tertiary architecture that is of great interest as a model for RNA folding. Domain 5 (D5) is a highly conserved region of the intron that is considered one of the most critical structures in the catalytic core. Despite its central importance, the means by which D5 interacts with other core elements is unclear. To obtain a map of potential interaction sites, dimethyl sulfate was used to footprint regions of the intron that are involved in D5 binding. These studies were complemented by measurements of D5 binding to a series of truncated intron derivatives. In this way, the minimal region of the intron required for strong D5 association was defined and the sites most likely to represent thermodynamically significant positions of tertiary contact were identified. These studies show that ground-state D5 binding is mediated by tertiary contacts to specific regions of D1, including a tetraloop receptor and an adjacent three-way junction. In contrast, D2 and D3 are not found to stabilize D5 association. These data highlight the significance of D1-D5 interactions and will facilitate the identification of specific tertiary contacts between them.

Domain 6 (D6) of group II introns contains a bulged adenosine that serves as the branch-site during self-splicing. In addition to this adenosine, other structural features in D6 are likely to contribute to the efficiency of branching. To understand their role in promoting self-splicing, the branch-site and surrounding nucleotides were mutagenized. Detailed kinetic analysis on the self-splicing efficiency of the mutants revealed several interesting features. First, elimination of the branch-site does not preclude efficient splicing, which takes place instead through a hydrolytic first step. Second, pairing of the branch-site does not eliminate branching, particularly if the adenosine is involved in a mispair. Third, the G-U pairs that often surround group II intron branch-points contribute to the efficiency of branching. These results suggest that there is a strong driving force for promoting self-splicing by group II introns, which employ a versatile set of different mechanisms for ensuring that splicing is successful. In addition, the behavior of these mutants indicates that a bulged adenosine per se is not the important determinant for branch-site recognition in group II introns. Rather, the data suggest that the branch-site adenosine is recognized as a flipped base, a conformation that can be promoted by a variety of different substructures in RNA and DNA.

Group II introns are large, self-splicing RNAs and mobile genetic elements that provide good model systems for studies of RNA folding. The structures and mechanistic functions of individual domains are being elucidated, and long-range tertiary interactions between the domains are being identified, thus helping to define the three-dimensional architecture of the intron.

Of the proteins required for pre-mRNA splicing, at least four, the DEAH-box proteins, are closely related due to the presence of a central 'RNA helicase-like' region, and extended homology through a large portion of the protein. A major unresolved question is the function of these proteins. Indirect evidence suggests that several of these proteins are catalysts for important structural rearrangements in the spliceosome. However, the mechanism for the proposed alterations is presently unknown. We present evidence that PRP22, a DEAH-box protein required for mRNA release from the spliceosome, unwinds RNA duplexes in a concentration- and ATP-dependent manner. This demonstrates that PRP22 can modify RNA structure directly. We also show that the PRP22-dependent release of mRNA from the spliceosome is an ATP-dependent process and that recombinant PRP22 is an ATPase. Non-hydrolyzable ATP analogs did not substitute for ATP in the RNA-unwinding reaction, suggesting that ATP hydrolysis is required for this reaction. Specific mutation of a putative ATP phosphate-binding motif in the recombinant protein eliminated the ATPase and RNA-unwinding capacity. Significantly, these data suggest that the DEAH-box proteins act directly on RNA substrates within the spliceosome.

Group II intron ai5 gamma was reconstructed into a multiple-turnover ribozyme that efficiently cleaves small oligonucleotide substrates in-trans. This construct makes it possible to investigate sequence specificity, since second-order rate constants (kcat/K(m), or the specificity constant) can be obtained and compared with values for mutant substrates and with other ribozymes. The ribozyme used in this study consists of intron domains 1 and 3 connected in-cis, together with domain 5 as a separate catalytic cofactor. This ribozyme has mechanistic features similar to the first step of reverse-splicing, in which a lariat intron attacks exogenous RNA and DNA substrates, and it therefore serves as a model for the sequence specificity of group II intron mobility. To quantitatively evaluate the sequence specificity of this ribozyme, the WT kcat/Km value was compared to individual kcat/Km values for a series of mutant substrates and ribozymes containing single base changes, which were designed to create mismatches at varying positions along the two ribozyme-substrate recognition helices. These mismatches had remarkably large effects on the discrimination index (1/relative kcat/K(m)), resulting in values > 10,000 in several cases. The delta delta G++ for mismatches ranged from 2 to 6 kcal/mol depending on the mismatch and its position. The high specificity of the ribozyme is attributable to effects on duplex stabilization (1-3 kcal/mol) and unexpectedly large effects on the chemical step of reaction (0.5-2.5 kcal/mol). In addition, substrate association is accompanied by an energetic penalty that lowers the overall binding energy between ribozyme and substrate, thereby causing the off-rate to be faster than the rate of catalysis and resulting in high specificity for the cleavage of long target sequences (> or = 13 nucleotides).

Group I, group II and spliceosomal introns splice by two sequential transesterification reactions. For both spliceosomal and group II introns, the first-step reaction occurs by nucleophilic attack on the 5' splice junction by the 2' hydroxyl of an internal adenosine, forming a 2'-5' phosphodiester branch in the intron. The second reaction joins the two exons with a 3'-5' phosphodiester bond and releases intron lariat. In vitro, group II introns can self-splice by an efficient alternative pathway in which the first-step reaction occurs by hydrolysis. The resulting linear splicing intermediate participates in normal second-step reactions, forming spliced exon and linear intron RNAs. Here we show that the group II intron first-step hydrolysis reaction occurs in vivo in place of transesterification in the mitochondria of yeast strains containing branch-site mutations. As expected, the mutations block branching, but surprisingly still allow accurate splicing. This hydrolysis pathway may have been a step in the evolution of splicing mechanisms.

The most highly conserved nucleotides in D5, an essential active site component of group II introns, consist of an AGC triad, of which the G is invariant. To understand how this G participates in catalysis, the mechanistic contribution of its functional groups was examined. We observed that the exocyclic amine of G participates in ground state interactions that stabilize D5 binding from the minor groove. In contrast, each major groove heteroatom of the critical G (specifically N7 or O6) is essential for chemistry. Thus, major groove atoms in an RNA helix can participate in catalysis, despite their presumed inaccessibility. N7 or O6 of the critical G could engage in critical tertiary interactions with the rest of the intron or they could, together with phosphate oxygens, serve as a binding site for catalytic metal ions.

A stopped-flow fluorescence spectroscopic assay for RNA folding was used to monitor the association of a multicomponent ribozyme derived from group II intron ai5gamma. In the presence of Mg2+, association of a short fluorescein-labeled oligonucleotide substrate with intron domain 1 (D1) resulted in a unique fluorescein emission enhancement, which reflected ribozyme folding and substrate binding. It was found that substrate binding follows a simple bimolecular encounter model, with k(on) approaching the rate of simple duplex formation. The Kd between substrate and D1 was determined to be 11 nM, which is in close agreement with the Kd obtained through oligonucleotide cleavage assays requiring catalytic domain 5 (D5). Ribozyme variants D13 and D135, which contain D3 and/or D5 attached to D1 in-cis, bound substrate with very similar Kd values, suggesting that D1 can fold independently and contains all residues important for ground-state binding to substrate. Both stopped-flow fluorescence assays and chemical modification footprinting data showed that, in all three ribozymes, Mg2+ was required and sufficient for folding. The rates of substrate association and the fraction of active ribozyme showed similar [Mg2+] dependencies, indicating that folding and substrate binding in these three ribozymes are the result of similar processes involving specific, weakly bound Mg2+ ions. The apparent binding constants for the Mg2+ ions were found to be approximately 70 mM in each case. Together, these data show that D1 is an independent folding unit with respect to substrate binding and that specific Mg2+ ions are required for the formation of a distinct tertiary structure in group II introns.

The 2'-hydroxyl on a specific bulged adenosine is the nucleophile during the first step of splicing by group II introns. To understand the means by which the ribozyme core recognizes this adenosine, it was mutagenized and effects on catalytic activity were quantified. The results indicate that a low level of mutational variability is tolerated at the branch-site of group II introns, with no apparent loss of fidelity. Analyses of mutant and modified nucleotides at the branch-site reveal that adenine is recognized primarily through the N6 amino group and by steric exclusion of functionalities found on other bases. The mutational and single atom effects reported here contrast with those observed during spliceosomal processing, suggesting that there are important differences in adenosine recognition by the two systems.

One of the most common RNA tertiary interactions involves the docking of GNRA hairpin loops into stem-loop structures on other regions of RNA. Domain 5 of the group II intron interacts with Domain 1 through such an interaction, which has been characterized thermodynamically and kinetically for the ai5g intron. Using this system, it was possible to test the morphological tolerances of the GNRA tetraloop involved in tertiary interactions. The data presented herein show that a GNRA tetraloop can still participate in tertiary interaction after being physically cut at any phosphodiester linkage within the loop. The "nicked tetraloop" can be expanded by many nucleotides in either direction and the covalently continuous loop can also be expanded without loss of interaction energy. In the context of the nicked tetraloop, the second nucleotide of the tetraloop sequence can be completely deleted without loss of function. By examining radical alterations in tetraloop structure, this study helps define the minimal sequence and structural requirements of a GNRA motif involved in long-range tertiary interaction. It shows that "tetraloop"-like structures capable of forming tertiary interactions can be imbedded in unexpected contexts, such as internal loops and apparently open structure within RNA. It demonstrates that pentaloops and hexaloops can form the same type of interaction, with almost equal affinity, as a tetraloop. Taken together, these data suggest a more generic term for the GNRA tetraloop-receptor interaction: It is proposed herein that the term "GNRA tetraloop" be replaced by "GNn/RA", where n represents a variable number of nucleotides and / indicates that the loop can be divided and interrupted by other sequences.

Domain 5 is an essential active-site component of group II intron ribozymes. The role of backbone substituents in D5 function was explored through synthesis of a series of derivatives containing deoxynucleotides at each position along the D5 strand. Kinetic screens revealed that eight 2'-hydroxyl groups were likely to be critical for activity of D5. Through two separate methods, including competitive inhibition and direct kinetic analysis, effects on binding and chemistry were distinguished. Depending on their function, important 2'-hydroxyl groups lie on opposite faces of the molecule, defining distinct loci for molecular recognition and catalysis by D5.

Self-splicing group II introns are found in bacteria and in the organellar genes in plants, fungi, and yeast. The mechanism for the first step of splicing is generally believed to involve attack of a specific intronic 2'-hydroxyl group on a phosphodiester linkage at the 5'-splice site, resulting in the formation of a lariat intron species. In this paper, we present kinetic and enzymatic evidence that in vitro there are two distinct pathways for group II intron self-splicing: one involves 2'-OH attack and another involves attack of water or hydroxide. These two pathways occur in parallel under all reaction conditions, although either can dominate in the presence of particular salts or protein cofactors. Both pathways are followed by a successful second step of splicing, and either pathway can be highly efficient. We find that the hydrolytic pathway prevails under physiological ionic conditions, while branching predominates at molar concentrations of ammonium ion. The intron is observed to adopt two major active conformations. In order to quantify their individual reaction rates, we applied a mechanistic model describing biphasic parallel kinetic behavior. Kinetic analysis throughout the investigation reveals that there is no coupling between the unproductive "spliced-exon-reopening" reaction (SER) and hydrolysis during the first step of splicing. Conditions that stimulate branching can promote the SER reaction just as efficiently as conditions that stimulate the hydrolytic pathway. Although there is little evidence that it exists in vivo, a hydrolytic splicing pathway for group II introns has important implications for the translation of intron-encoded proteins and the inhibition of intron migration into new genomic positions.

Background: Group II introns are self-splicing RNAs that have mechanistic similarity to the spliceosome complex involved in messenger RNA splicing in eukaryotes. These autocatalytic molecules can be reconfigured into highly specific, multiple-turnover ribozymes that cleave oligonucleotides in trans. We set out to use a simplified system of this kind to study the mechanism of cleavage., Results: Unlike other catalytic RNA molecules, the group II ribozymes cleave DNA linkages almost as readily as RNA linkages. One ribozyme variant cleaves DNA linkages with an efficiency comparable to that of restriction endonuclease EcoRI. Single deoxynucleotide substitutions in the substrate showed that the ribozymes bind substrate without engaging 2'-hydroxyl groups., Conclusions: The ribose 2'-hydroxyl group at the cleavage site has little role in transition-state stabilization by group II ribozymes. Substrate 2'-hydroxyl groups are not involved in substrate binding, suggesting that only base-pairing is required for substrate recognition.

The number of known motifs for RNA folding and RNA tertiary organization is expanding rapidly as we learn more about the diverse biological functions of RNA. Problems in protein and RNA folding have melded in recent investigations of ribonucleoprotein folding. Theoretical and experimental models are rapidly being developed for the pathways and stabilizing forces involved in RNA folding.

By examining the first step of group II intron splicing in the absence of the second step, we have found that there is an interplay of three distinct reactions at the 5'-splice site: branching, reverse branching, and hydrolytic cleavage. This approach has yielded the first kinetic parameters describing eukaryotic branching and establishes that group II intron catalysis can proceed on a rapid timescale. The efficient reversibility of the first step is due to increased conformational organization in the branched intermediate and it has several important mechanistic implications. Reversibility in the first step requires that the second step of splicing serve as a kinetic trap, thus driving splicing to completion and coordinating the first and second step of splicing. Facile reverse branching also provides the intron with a proofreading mechanism to control the fidelity of 5'-splice site selection and it provides a kinetic basis for the apparent mobility of group II introns.

The self-splicing ai5g group II intron was transformed into a three-part ribozyme that site-specifically cleaves small oligonucleotide substrates with multiple turnover. The ribozyme is composed of intron domain 1 (D1, 425 nucleotides), with catalytically essential domain 5 (D5, 58 nucleotides) provided separately as a reaction cofactor. Together, the D1/D5 complex cleaves small substrates analogous in sequence to the 5'-splice site of the intron. Activity of the ribozyme was studied using a combination of single- and multiple-turnover experiments in which the concentrations of the RNA components were varied in order to probe their individual role in the overall mechanism. Values for kcat, Km, and kcat/Km were the same within experimental error for the two enzymological approaches. These kinetic analyses reveal that the ribozyme utilizes a classic Michaelis-Menten reaction mechanism in which the chemical step of catalysis (kcat = kchem = approximately 0.03 min-1 at full saturation) is rate limiting for the overall reaction. The D1/D5 complex binds tightly to the substrate (Km = 6.3 nM) and specifically recognizes sequences both 5' and 3' to the ribozyme cleavage site. These studies represent the first quantitative analysis of group II recognition and affinity for the 5'-splice site. As observed in previous studies on the role of D5 RNA, D5 binds tightly to the ternary complex (Km = 870 nM). The second-order rate constant for RNA cleavage (kcat/Km = 3.3 x 10(6)) is an order of magnitude slower than that observed for other ribozymes in this mechanistic class, all of which are rate-limited by steps other than chemistry. That kcat equals kchem in this ribozyme is supported by the overall kinetic analysis and by the observation that an Rp phosphorothioate is cleaved approximately 3-fold more slowly than a phosphate at the cleavage site. These studies represent a preliminary examination of stereochemical preference by a group II intron active site in the transition state. The substrate specificity, reaction conditions, and mutational sensitivity of this ribozyme are consistent with a reaction analogous to the first step of group II intron self-splicing, although its stereochemical preference is analogous to a second-step reversal.

There is a phylogenetically conserved G.U pair at the 5'-splice site of group I introns. When this is mutagenized to a G-C pair, splicing of these introns is greatly reduced. We have used a ribozyme derived from the Tetrahymena group I intron to compare the binding and reactivity of oligonucleotides that form either a G.U or a G-C pair at this position. Ribozyme binding of oligonucleotides at 42 degrees C was measured by native gel electrophoresis and equilibrium dialysis. Binding of GGCCCUCC (C(-1)P), which base-pairs with the ribozyme guide sequence to form a G-C at the cleavage site, was 10-fold weaker than the binding of GGCCCUCU (U(-1)P), which maintains the conserved G.U pair at the cleavage site. This is surprising since a terminal G-C enhances the binding between oligonucleotides by 20-fold relative to a terminal G.U. Thermal denaturation studies indicate that C(-1)P and several analogs with deoxy substitutions bind the guide-sequence oligonucleotide, GGAGGGAAA, as strongly as they bind the ribozyme. In contrast, U(-1)P binds 240-fold more strongly to the ribozyme than to GGAGGGAAA, a difference that is decreased by deoxy substitutions. Thus, while U(-1)P binds the ribozyme through a combination of base-pairing and specific 2-OH and other tertiary interactions, C(-1)P may bind by base-pairing alone. The substrate GGCCCUCCAAAAA (C(-1)S) is cleaved 100-fold more slowly than GGCCCUCUAAAAA (U(-1)S) and also has a higher propensity to be cleaved at the wrong nucleotide position.(ABSTRACT TRUNCATED AT 250 WORDS)

Ribozyme kinetics and binding studies of a two-piece group II intron were used to mechanistically characterize a reaction analogous to the first step of RNA splicing. Domain 5 RNA (D5) catalyzes specific hydrolysis of an RNA substrate (exD123) composed of sequences surrounding the 5' exon/intron boundary. Both single- and multiple-turnover kinetic analyses produced similar values of kcat (0.04 and 0.1 min-1, respectively) and Km (270 and 190 nM, respectively) for 5' splice site hydrolysis catalyzed by D5. Base pairing is not believed to stabilize the binding of D5 to exD123, so the low Km values suggest that unusual tertiary interactions provide considerable energetic stabilization to this complex. The strength of D5-exD123 binding was confirmed using a new direct binding assay based on gel filtration chromatography. In this initial application of the assay, which systematically underestimates binding by approximately 3-fold, Kd values were obtained in relative agreement with Km. This agreement, together with agreement between kinetically determined variables, suggests that the reaction is described by a straightforward Michaelis-Menten mechanism and that kcat is the rate of the chemical step. This is supported by the log/linear pH/rate profile for kcat which has a slope = 1 up to pH 6.2, consistent with a form of general base catalysis within this linear range. The shape of the plot suggests that the active site responsible for 5' splice site hydrolysis has a pKa of > or = 7.0.

Ribozymes are an important new class of metalloenzymes that have an unlikely feature: they are made entirely of ribonucleic acid (RNA). Metal ions are essential for efficient chemical catalysis by ribozymes and are often required for the stabilization of ribozyme structure. Most ribozymes catalyze reactions at phosphorus centers through one of two major mechanistic pathways, and reaction has been observed at carbon centers. Creative experiments have revealed the position of metal ions in the active site of two ribozymes. The exploitation of variable metal geometry and reactivity has expanded ribozyme chemistry and has facilitated the application of in vitro selection for the creation of novel ribozymes.

In catalysis by group I introns, the helix (P1) containing the RNA cleavage site must be positioned next to the guanosine binding site. We have identified a conserved adenine in the catalytic core that contributes to the stability of this arrangement and propose that it accepts a hydrogen bond from a specific 2'-OH in P1. Such base-backbone tertiary interactions may be generally important to the organization of RNA tertiary structure.

Shortened forms of the group I intron from Tetrahymena catalyse sequence-specific cleavage of exogenous oligonucleotide substrates. The association between RNA enzyme (ribozyme) and substrate is mediated by pairing between an internal guide sequence on the ribozyme and a complementary sequence on the substrate. RNA substrates and cleavage products associate with a binding energy greater than that of base-pairing by approximately 4 kcal-mol-1 (at 42 degrees C), whereas DNA associates with an energy around that expected for base-pairing. It has been proposed that the difference in binding affinity is due to specific 2'-OH groups on an RNA substrate forming stabilizing tertiary interactions with the core of the ribozyme, or that the RNA.RNA helix formed upon association of an RNA substrate and the ribozyme might be more stable than an RNA.DNA helix of the same sequence. To differentiate between these two models, chimaeric oligonucleotides containing deoxynucleotide residues at successive positions along the chain were synthesized, and their equilibrium binding constants for association with the ribozyme were measured directly by a new gel electrophoresis technique. We report here that most of the extra binding energy can be accounted for by discrete RNA-ribozyme interactions, the 2'-OH group on the sugar residue three nucleotides from the cleavage site contributing the most interaction energy. Thus, in addition to the well documented binding of RNA to RNA by base-pairing, 2'-OH groups within a duplex can also mediate association between RNA molecules.

Like protein enzymes, RNA enzymes (ribozymes) provide specific binding sites for their substrates. We now show that equilibrium dissociation constants for complexes between the Tetrahymena ribozyme and its RNA substrates and products can be directly measured by electrophoresis in polyacrylamide gels containing divalent cations. Binding is 10(3)- to 10(4)-fold tighter (4-5 kcal/mol at 42 degrees C) than expected from base-pairing interactions alone, implying that tertiary interactions also contribute to energetic stabilization. Binding decreases with single base changes in the substrate, substitution of deoxyribose sugars, and lower Mg2+ concentration. Ca2+, which enables the ribozyme to fold but is unable to mediate efficient RNA cleavage, promotes weaker substrate binding than Mg2+. This indicates that Mg2+ has special roles in both substrate binding and catalysis. Mutagenesis of a region near the internal guide sequence disrupts substrate binding, whereas binding is not significantly affected by a mutation of the guanosine-binding site. This approach should be generally useful for analysis of ribozyme variants independent of their catalytic activities.

The complex bis(phenanthrenequinone diimine)(bipyridyl)rhodium(III), Rh(phi)2(bpy)3+, cleaves DNA efficiently in a sequence-neutral fashion upon photoactivation so as to provide a novel, high resolution, chemical photofootpring reagent. Photofootprinting of two crystallographically characterized DNA-binding agents, distamycin, a small natural product which binds to DNA in the minor groove, and the endonuclease EcoRI, which binds in the major groove, gave respectively a 5-7 base pair footprint for the drug at its A6 binding site and a 10-12 base pair footprint for the enzyme centered at its recognition site (5'-GAATTC-3'). Both footprints agree closely with the crystallographic results. The photocleavage reaction can be performed using either a high intensity lamp or, conveniently, a simple transilluminator box, and the photoreaction is not inhibited by moderate concentrations of reagents which are sometimes required for examining interactions of molecules with DNA. When compared with other popular footprinting agents, the rhodium complex shows a number of distinct advantages: sequence-neutrality, high resolution, ability to footprint major as well as minor groove-binding ligands, applicability in the presence of additives such as Mg2+ or glycerol, ease of handling, and a sharply footprinted pattern. Light activated footprinting reactions furthermore offer the possibility of examining DNA-binding interactions with time resolution and within the cell.