Search

This investigation deals with NiMo-alumina hydrotreating catalysts effective in the deoxygenation of rapeseed oil. The main goal was to compare catalyst structure and their deoxygenation performance and to link these parameters to reveal important structural information regarding the catalyst's intended use. Catalysts were prepared from different precursors (nickel acetate tetrahydrate/molybdenyl acetylacetonate in ethanol and water vs. nickel nitrate hexahydrate/ammonium heptamolybdate tetrahydrate in water), which resulted in their contrasting structural arrangement. These changes were characterized by elemental composition determination, UV-Vis diffuse reflectance spectroscopy, temperature programmed reduction by hydrogen, nitrogen physisorption at 77 K, scanning and transmission electron microscopies, and deoxygenation of rapeseed oil. The critical aspect of high oxygen elimination was a homogeneous dispersion of NiO and MoO 3 phases on the support. It subsequently led to the effective transformation of the oxide form of a catalyst to its active sulfide form well-dispersed on the support. On the other hand, the formation of bulk MoO 3 resulted in the separate bulk phase and lower extent of sulfidation., (Copyright © 2020 Priecel, Kubička, Vázquez-Zavala, Antonio de los Reyes, Pouzar and Čapek.)

Background: Gold nanoparticles (AuNPs) with unique physicochemical properties have received a great deal of interest in the field of biological, chemical and biomedical implementations. Despite the widespread use of AuNPs in chemical and biological sensing, catalysis, imaging and diagnosis, and more recently in therapy, no comprehensive summary has been provided to explain how AuNPs could aid in developing improved sensing and catalysts systems as well as medical settings., Scope of Review: The chemistry of Au-based nanosystems was followed by reviewing different applications of Au nanomaterials in biological and chemical sensing, catalysis, imaging and diagnosis by a number of approaches, and finally synergistic combination therapy of different cancers. Afterwards, the clinical impacts of AuNPs, future application of AuNPs, and opportunities and challenges of AuNPs application were also discussed., Major Conclusions: AuNPs show exclusive colloidal stability and are considered as ideal candidates for colorimetric detection, catalysis, imaging, and photothermal transducers, because their physicochemical properties can be tuned by adjusting their structural dimensions achieved by the different manufacturing methods., General Significance: This review provides some details about using AuNPs in sensing and catalysis applications as well as promising theranostic nanoplatforms for cancer imaging and diagnosis, and sensitive, non-invasive, and synergistic methods for cancer treatment in an almost comprehensive manner., (Copyright © 2019 Elsevier B.V. All rights reserved.)

This work aims to develop a rapid and efficient strategy for preparing supported metal catalysts for catalytic applications. The sonication-assisted reduction-precipitation method was employed to prepare the heterogeneous mono- and bi-metallic catalysts for photocatalytic degradation of methyl orange (MO) and preferential oxidation (PROX) of CO in H 2 -rich gas. In general, there are three advantages for the sonication-assisted method as compared with the conventional methods, including high dispersion of metal nanoparticles on the catalyst support, the much higher deposition efficiency (DE) than those of the deposition-precipitation (DP) and co-precipitation (CP) methods, and the very fast preparation, which only lasts 10-20s for the deposition. In the AuPd/TiO 2 catalysts series, the AuPd(3:1)/TiO 2 catalyst is the most active for MO photocatalytic degradation; while for PROX reaction, Ru/TiO 2 , Au-Cu/SBA-15 and Pt/γ-Al 2 O 3 catalysts are very active, and the last one showed high stability in the lifetime test. The structural characterization revealed that in the AuPd(3:1)/TiO 2 catalyst, Au-Pd alloy particles were formed and a high percentage of Au atoms was located at the surface. Therefore, this sonication-assisted method is efficient and rapid in the preparation of supported metal catalysts with obvious structural characteristics for various catalytic applications., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Green, inexpensive, and robust copper-based heterogeneous catalysts achieve 100 % conversion and 99 % selectivity in the conversion of furfural to furfuryl alcohol when using cyclopentyl-methyl ether as green solvent and microwave reactors at low H 2 pressures and mild temperatures. The utilization of pressurized microwave reactors produces a 3-4 fold increase in conversion and an unexpected enhancement in selectivity as compared to the reaction carried out at the same conditions using conventional autoclave reactors. The enhancement in catalytic rate produced by microwave irradiation is temperature dependent. This work highlights that using microwave irradiation in the catalytic hydrogenation of biomass-derived compounds is a very strong tool for biomass upgrade that offers immense potential in a large number of transformations where it could be a determining factor for commercial exploitation., (© 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Methylbenzenes are among the most important organic chemicals today and, among them, p-xylene deserves particular attention because of its production volume and its application in the manufacture of polyethylene terephthalate (PET). There is great interest in producing this commodity chemical more sustainably from biomass sources, particularly driven by manufacturers willing to produce more sustainable synthetic fibres and PET bottles for beverages. A renewable source for p-xylene would allow achieving this goal with minimal disruption to existing processes for PET production. Despite the fact that recently some routes to renewable p-xylene have been identified, there is no clear consensus on their feasibility or implications. We have critically reviewed the current state-of-the-art with focus on catalytic routes and possible outlook for commercialisation. Pathways to obtain p-xylene from a biomass-derived route include methanol-to-aromatics (MTA), ethanol dehydration, ethylene dimerization, furan cycloaddition or catalytic fast pyrolysis and hydrotreating of lignin. Some of the processes identified suggest near-future possibilities, but also more speculative or longer-term sources for synthesis of p-xylene are highlighted., (© 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)