Search

Prediction of water and solute migration in natural clay-based materials requires a detailed understanding of the roles played by different porosity types (around or inside clay particles) on the overall transfer process. For smectite, a reference material for the design of migration models, this discrimination is complex because of osmotic swelling of the structure under water-saturated conditions. Diffusion experiments with a water tracer (HDO) were conducted on 0.1-0.2, 1-2, and 10-20 μm size fractions of Na-vermiculite, a swelling clay mineral with no osmotic swelling. Results obtained for the two finest fractions suggest that osmotic swelling and the associated impact on pore structure are responsible for the low D e values reported in the literature for smectite compared to those of vermiculite. When considering only interparticle porosity, D e values for vermiculite are similar to those reported for nonporous grains (Na-kaolinite and Na-illite). This indicates that interparticle porosity has a primary effect on the overall water diffusion process, whereas interlayer porosity is shown to imply a small proportion of HDO adsorption. This study provides evidence that vermiculite is a promising reference mineral for the understanding of the roles played by pore structure and mineral-water interaction in the transport properties of water in claystones and for associated refinement of dual-porosity diffusion models.

Understanding calcium silicate hydrates (CSHs) is of paramount importance for understanding the behavior of cement materials because they control most of the properties of these man-made materials. The atomic scale water content and structure have a major influence on their properties, as is analogous with clay minerals, and we should assess these. Here, we used a multiple analytical approach to quantify water distribution in CSH samples and to determine the relative proportions of water sorbed on external and internal (interlayer) surfaces. Water vapor isotherms were used to explain the water distribution in the CSH microstructure. As with many layered compounds, CSHs have external and internal (interlayer) surfaces displaying multilayer adsorption of water molecules on external surfaces owing to the hydrophilic surfaces. Interlayer water was also quantified from water vapor isotherm, X-ray diffraction (XRD), and thermal gravimetric analyses (TGA) data, displaying nonreversible swelling/shrinkage behavior in response to drying/rewetting cycles. From this quantification and balance of water distribution, we were able to explain most of the widely dispersed data already published according to the various relative humidity (RH) conditions and measurement techniques. Stoichiometric formulas were proposed for the different CSH samples analyzed (0.6 < Ca/Si < 1.6), considering the interlayer water contribution.

The aim of the present paper is to clarify previous results showing that selectivity coefficients determined for the exchange of Na(+) for Ca(2+) in montmorillonite were dependent on the solid/solution ratio. The organization of montmorillonite suspensions upon Na(+)/Ca(II) exchange was analyzed by combining optical microscopy, small-angle X-ray scattering and X-ray diffraction. All samples displayed flocculated characteristics, eliminating the possibility of contrasting accessibility of sorption sites with the solid/solution ratio. Modeling of experimental X-ray diffraction patterns was used to quantify the relative proportions of interlayer Ca(2+) and Na(+) cations along the exchange isotherm. The results further confirmed the influence of the solid/solution ratio on the degree of interlayer Ca(II)-for-Na(+) exchange, and specific selectivity coefficients for interlayer sites were determined. The effect of the solid/solution ratio was finally interpreted by the resulting local changes in the solution chemistry. We demonstrated that by accounting for the Donnan effect, the different data can be interpreted using a single selectivity coefficient. The obtained Kc constant was successfully applied to interpret existing hydrogeochemical data on a natural aquitard. This most likely represents a more constrained and valid approach for the modeling of reactive element transport in natural media than does the poorly defined Kd parameter., (Copyright © 2011 Elsevier Inc. All rights reserved.)

Na/Ca ion-exchange isotherms were performed on a Na-saturated montmorillonite for different constant normalities of the aqueous chloride solution and at two solid/solution ratios. The experimental data suggest that the affinity of Na(+) for the solid increases with total normality and m/V ratio and that a significant proportion of CaCl(+) is also sorbed. A thermodynamic modeling procedure with one sorption site and three sorbed cations (Na(+), Ca(2+) and CaCl(+)) was applied to interpret the data. We show that by accounting for the activities of aqueous species, the experimental data obtained at different total normalities for a given solid/solution ratio can be fitted using a unique set of selectivity coefficient values. However, when the m/V ratio is decreased from 25 to 2.5 g/L, an increase in the log Kc(Na(+)/Ca(2+)) of up to 0.4 ± 0.05 was required to interpret the data with a constant log Kc(Na(+)/CaCl(+)) value. The same behavior concerning the increase in the log Kc(Na(+)/Ca(2+)) with a m/V ratio decrease was observed when using a multi-site model taking into account the specific sorption of H(+). The results clearly indicate that the Na(+)/Ca(2+) selectivity coefficients strongly depend on the solid/solution ratio but are independent of the exchanger composition and the total normality of the solution. Such findings provide possible pitfalls when using selectivity coefficients obtained in diluted suspension to assess the sorption in compacted clayrocks and allow a better prediction of the sorption of trace elements in competition with major cations., (Copyright © 2010 Elsevier Inc. All rights reserved.)

To understand the process governing iron corrosion in clay over centuries, the chemical and mineralogical properties of solids formed by free or anodically activated corrosion of iron in water-saturated clay at 90 degrees C over 4 months were probed using microscopic and spectroscopic techniques. Free corrosion led to the formation of an internal discontinuous thin (<3 microm thick) magnetite layer, an external layer of Fe-rich phyllosilicate, and a clay transformation layer containing Ca-doped siderite (Ca(0.2)Fe(0.8)CO(3)). The thickness of corroded iron equaled approximately 5-7 microm, consistent with previous studies. Anodic polarization resulted in unequally distributed corrosion, with some areas corrosion-free and others heavily corroded. Activated corrosion led to the formation of an inner magnetite layer, an intermediate Fe(2)CO(3)(OH)(2) (chukanovite) layer, an outer layer of Fe-rich 7 A-phyllosilicate, and a transformed matrix layer containing siderite (FeCO(3)). The corroded thickness was estimated to 85 microm, less than 30% of the value expected from the supplied anodic charge. The difference was accounted for by reoxidation at the anodically polarized surface of cathodically produced H(2)(g). Thus, free or anodically activated corroding conditions led to structurally similar interfaces, indicating that anodic polarization can be used to probe the long-term corrosion of iron in clay. Finally, corrosion products retained only half of Fe oxidized by anodic activation. Missing Fe probably migrated in the clay, where it could interact with radionuclides released by alteration of nuclear glass.