Search

We investigated the thermal expansion of amorphous polystyrene (PS) and poly(methyl methacrylate) (PMMA) homopolymers using the temperature dependence of spatial electron-density correlations. The strong and broad X-ray interference maxima arising from inter- and intramolecular correlation distances were distinct, maintaining their shape during the heating of the samples to 250 °C. Three maxima characteristic of electron density correlations between the backbones, substituents along the chain, and repeat-units were observed. A remarkable temperature dependence was identified in the largest correlation distances arising from the intermolecular interactions. Based on the temperature dependence of the correlation distances, the coefficients of molecular expansion were very close to the coefficients of thermal expansion. This study provides a simple yet accurate way to correlate macroscopic volume expansions with the molecular expansion obtained from wide-angle X-ray scattering (WAXS) data.

As actuated devices become smaller and more complex, there is a need for smart materials and structures that directly function as complete mechanical units without an external power supply. The strategy uses light-powered, twisted, and coiled azobenzene-functionalized semicrystalline liquid crystal elastomer (AC-LCE) springs. This twisting and coiling, which has previously been used for only thermally, electrochemically, or absorption-powered muscles, maximizes uniaxial and radial actuation. The specially designed photochemical muscles can undergo about 60% tensile stroke and provide 15 kJ m -3 of work capacity in response to light, thus providing about three times and two times higher performance, respectively, than previous azobenzene actuators. Since this actuation is photochemical, driven by ultraviolet (UV) light and reversed by visible light, isothermal actuation can occur in a range of environmental conditions, including underwater. In addition, photoisomerization of the AC-LCEs enables unique latch-like actuation, eliminating the need for continuous energy application to maintain the stroke. Also, as the light-powered muscles processed to be either homochiral or heterochiral, the direction of actuation can be reversed. The presented approach highlights the novel capabilities of photochemical actuator materials that can be manipulated in untethered, isothermal, and wet environmental conditions, thus suggesting various potential applications, including underwater soft robotics., (© 2024 Wiley‐VCH GmbH.)

We report hydroxyl-functionalized microporous polymers with tunable benzaldehyde groups for gas separation membranes. These polymers were synthesized via acid-catalyzed Friedel-Crafts polycondensation. The tunability in d-spacing and fractional free volume of these polymers depends on the para position substituents (-H, -F, -Cl, and -Br) of the benzaldehyde. Specifically, the size and polarity of the para position substituent influence the polymer chain-packing structure. Consequently, the hydroxyl-functionalized microporous polymer membrane with a larger para position substituent in the benzaldehyde group exhibited improved gas permeability. This improvement is due to enhanced gas diffusivity resulting from the inefficient polymer chain-packing structure. Furthermore, these membranes demonstrated enhanced CO 2 plasticization resistance, attributable to the rigid, contorted polymer structure and the hydrogen bonding interactions between hydroxyl groups. This study provides insights into the relationship between the polymer chain-packing structure, tunable para position substituents, and molecular transport., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Purpose: This study evaluated the effectiveness of different surveillance intensities on morbidity and mortality in women with breast cancer., Methods: This retrospective study included patients who had undergone breast cancer surgery in the Republic of Korea between 2009 and 2011. The patients were divided into two groups based on the intensity of their postsurgical surveillance: intensive surveillance group (ISG) and less-intensive surveillance group. Surveillance intensity was measured based on the frequency and type of follow-up diagnostic tests conducted, including mammography, ultrasonography, computed tomography, magnetic resonance imaging, bone scans, and positron emission tomography scans., Results: We included 1,356 patients with a median follow-up period of 121.2 months (range, 12.8-168.0 months). The analysis revealed no significant difference in the overall survival (OS) between the two groups within five years of surgery. However, patients with ISG exhibited significantly better breast cancer-specific survival (BCSS) and distant metastasis-free survival (DMFS) within the same period. Five years after surgery, the differences in survival outcomes between the groups were not statistically significant., Conclusion: Intensive surveillance did not demonstrate a significant improvement in OS for patients with breast cancer beyond five years postoperatively. However, within the first five years, intensive surveillance was associated with better BCSS and DMFS. These findings suggest that personalized surveillance strategies may benefit specific patient subsets, particularly in the early years after treatment. Further nationwide randomized studies are warranted to refine surveillance guidelines and optimize outcomes in patients with breast cancer., Competing Interests: The authors declare that they have no competing interests., (© 2024 Korean Breast Cancer Society.)

Mosquitoes are important vectors for the transmission of several infectious diseases that lead to huge morbidity and mortality. The exhaustive use of synthetic insecticides has led to widespread resistance and environmental pollution. Using essential oils and nano-emulsions as novel insecticides is a promising alternative approach for controlling vector borne diseases. In the current study, Lantana camara EO and NE were evaluated for their larvicidal and pupicidal activities against Anopheles culicifacies. The inhibitory effect of EO and NE on AChE, NSE (α/β), and GST was also evaluated and compared. GC-MS analysis of oil displayed 61 major peaks. The stable nano-emulsion with an observed hydrodynamic diameter of 147.62 nm was formed using the o/w method. The nano-emulsion exhibited good larvicidal (LC50 50.35 ppm and LC90 222.84 ppm) and pupicidal (LC50 54.82 ppm and LC90 174.58 ppm) activities. Biochemical evaluations revealed that LCEO and LCNE inhibited AChE, NSE (α/β), and GST, displaying LCNE to be a potent binder to AChE and NSE enzyme, whereas LCEO showed higher binding potency towards GST. The nano-emulsion provides us with novel opportunities to target different mosquito enzymes with improved insecticidal efficacy. Due to its natural origin, it can be further developed as a safer and more potent larvicide/insecticide capable of combating emerging insecticide resistance., (© 2024. The Author(s).)

Backgound and Objectives : Gastric metastasis from invasive ductal breast cancer (BC) is rare. It mainly occurs in patients with lobular BC. The occurrence of multiple metastases is typically observed several years after the primary diagnosis. Endoscopic findings of gastric metastasis of the BC were usually the linitis plastic type. Case presentation : A 72-year-old women who underwent right modified radical mastectomy (MRM) 10 month ago was referred after being diagnosed with early gastric cancer (EGC) during systemic chemotherapy. EGC type I was found at gastric fundus, and pathologic finding showed poorly differentiated adenocarcinoma. Metachronous double primary tumor EGC was considered. Management and Outcome : A laparoscopic total gastrectomy was performed, and postoperative pathology revealed submucosa invasion and two lymph node metastases. A pathologic review that focused on immunohistochemical studies of selected antibodies such as GATA binding protein 3 (GATA3), gross cystic disease fluid protein-15 (GCDFP-15), cytokeratin 7 (CK7) was performed again, comparing previous results. As a result, gastric metastasis from BC was diagnosed. After totally laparoscopic total gastrectomy, palliative first-line chemotherapy with paclitaxel/CDDP was performed. Two months after gastrectomy, she was diagnosed with para-aortic lymph node metastasis and multiple bone metastases. She expired six months after gastrectomy. Conclusions : Gastric metastasis from invasive ductal carcinoma of the breast, which is clinically manifested as EGC, is a very rare condition. If there is a history of BC, careful pathological review will be required.

Enhancing the mobility of lithium-ions (Li + ) through surface engineering is one of major challenges facing fast-charging lithium-ion batteries (LIBs). In case of demanding charging conditions, the use of a conventional artificial graphite (AG) anode leads to an increase in operating temperature and the formation of lithium dendrites on the anode surface. In this study, a biphasic zeolitic imidazolate framework (ZIF)-AG anode, designed strategically and coated with a mesoporous material, is verified to improve the pathways of Li + and electrons under a high charging current density. In particular, the graphite surface is treated with a coating of a ZIF-8-derived carbon nanoparticles, which addresses sufficient surface porosity, enabling this material to serve as an electrolyte reservoir and facilitate Li + intercalation. Moreover, the augmentation in specific surface area proves advantageous in reducing the overpotential for interfacial charge transfer reactions. In practical terms, employing a full-cell with the biphasic ZIF-AG anode results in a shorter charging time and improved cycling performance, demonstrating no evidence of Li plating during 300 cycles under 3.0 C-charging and 1.0 C-discharging. The research endeavors to contribute to the progress of anode materials by enhancing their charging capability, aligning with the increasing requirements of the electric vehicle applications., (© 2024 The Authors. Small published by Wiley‐VCH GmbH.)

Background: This study aimed to evaluate the association between initial fibrinogen levels and massive transfusion (MT) in emergency department (ED) patients with primary postpartum hemorrhage (PPH)., Methods: This retrospective study was conducted in the ED of a university-affiliated, tertiary referral center from January 2004 to August 2023. Patients were divided into two groups: the MT group, which included those who received a transfusion of 10 or more units of packed red blood cells within the first 24 h, and the Non-MT group., Results: Out of the 364 patients included in the study, 97 (26.6%) required MT. Fibrinogen, shock index, and lactate were independently associated with MT (odds ratio [OR] 0.987; 95% confidence interval [CI] 0.983-0.991; p < 0.001, OR 7.277; 95% CI 1.856-28.535; p = 0.004, and OR 1.261; 95% CI 1.021-1.557; p = 0.031, respectively). The area under the receiver operating characteristic curve for fibrinogen, shock index, and lactate in predicting MT was 0.871 (95% CI 0.832-0.904; p < 0.001), 0.821 (95% CI 0.778-0.859; p < 0.001), and 0.784 (95% CI 0.738-0.825; p < 0.001), respectively. When the cutoff value of fibrinogen was 400 mg/dL, both the sensitivity and negative predictive values for predicting MT were 100.0%. When the cutoff value of fibrinogen was 100 mg/dL, the specificity and positive predictive values were 91.8% and 70.7%, respectively., Conclusion: The initial fibrinogen levels were independently associated with the need for MT in ED patients with primary PPH.

To significantly reduce the charging time of commercial lithium-ion batteries (LIBs), it is essential to control the surface properties of graphite anodes because the charging process involves sluggish interfacial kinetics between graphite and the electrolyte. For the effective surface modification of graphite, herein we demonstrate the surface decoration with titanium carbide (TiC) nanocrystals onto graphite particles via a simple wet-coating process. The high electrical conductivity, low Li + adsorption energy, and small surface diffusion barrier of the TiC nanocrystals facilitate fast Li + adsorption and migration in the graphite surface by reducing the overpotential upon the charging process. The feasibility of the TiC nanocrystal-decorated graphite (TiC@AG) anode is thoroughly examined with an in-depth understanding of the interfacial reaction mechanism. Furthermore, the full-cell with a commercial cathode (LiNi 0.8 Co 0.1 Mn 0.1 O 2 ) and TiC@AG anode demonstrates an impressive capacity retention (94.5%) after 300 cycles under fast-charging condition (3 C-charging and 1 C-discharging) without any sign of Li plating. The charging time of the TiC@AG full-cell was estimated at 16.2 min (80% of state of charge), which is substantially shorter than that of the artificial graphite full-cell. Our findings offer practical insights into the design principles of advanced graphite anodes, contributing to the realization of fast-charging LIBs.

Background: The objective of this study was to estimate the accuracy of transcriptome-based classifier in differential diagnosis of uterine leiomyoma and leiomyosarcoma. We manually selected 114 normal uterine tissue and 31 leiomyosarcoma samples from publicly available transcriptome data in UCSC Xena as training/validation sets. We developed pre-processing procedure and gene selection method to sensitively find genes of larger variance in leiomyosarcoma than normal uterine tissues. Through our method, 17 genes were selected to build transcriptome-based classifier. The prediction accuracies of deep feedforward neural network (DNN), support vector machine (SVM), random forest (RF), and gradient boosting (GB) models were examined. We interpret the biological functionality of selected genes via network-based analysis using GeneMANIA. To validate the performance of trained model, we additionally collected 35 clinical samples of leiomyosarcoma and leiomyoma as a test set (18 + 17 as 1st and 2nd test sets)., Results: We discovered genes expressed in a highly variable way in leiomyosarcoma while these genes are expressed in a conserved way in normal uterine samples. These genes were mainly associated with DNA replication. As gene selection and model training were made in leiomyosarcoma and uterine normal tissue, proving discriminant of ability between leiomyosarcoma and leiomyoma is necessary. Thus, further validation of trained model was conducted in newly collected clinical samples of leiomyosarcoma and leiomyoma. The DNN classifier performed sensitivity 0.88, 0.77 (8/9, 7/9) while the specificity 1.0 (8/8, 8/8) in two test data set supporting that the selected genes in conjunction with DNN classifier are well discriminating the difference between leiomyosarcoma and leiomyoma in clinical sample., Conclusion: The transcriptome-based classifier accurately distinguished uterine leiomyosarcoma from leiomyoma. Our method can be helpful in clinical practice through the biopsy of sample in advance of surgery. Identification of leiomyosarcoma let the doctor avoid of laparoscopic surgery, thus it minimizes un-wanted tumor spread., (© 2023. The Author(s).)

Type Ia supernovae (SNe Ia) are thermonuclear explosions of degenerate white dwarf stars destabilized by mass accretion from a companion star 1 , but the nature of their progenitors remains poorly understood. A way to discriminate between progenitor systems is through radio observations; a non-degenerate companion star is expected to lose material through winds 2 or binary interaction 3 before explosion, and the supernova ejecta crashing into this nearby circumstellar material should result in radio synchrotron emission. However, despite extensive efforts, no type Ia supernova (SN Ia) has ever been detected at radio wavelengths, which suggests a clean environment and a companion star that is itself a degenerate white dwarf star 4,5 . Here we report on the study of SN 2020eyj, a SN Ia showing helium-rich circumstellar material, as demonstrated by its spectral features, infrared emission and, for the first time in a SN Ia to our knowledge, a radio counterpart. On the basis of our modelling, we conclude that the circumstellar material probably originates from a single-degenerate binary system in which a white dwarf accretes material from a helium donor star, an often proposed formation channel for SNe Ia (refs.  6,7 ). We describe how comprehensive radio follow-up of SN 2020eyj-like SNe Ia can improve the constraints on their progenitor systems., (© 2023. The Author(s).)

The rapid evolution of wearable technology in healthcare sectors has created the opportunity for people to measure their blood pressure (BP) using a smartwatch at any time during their daily activities. Several commercially-available wearable devices have recently been equipped with a BP monitoring feature. However, concerns about recalibration remain. Pulse transit time (PTT)-based estimation is required for initial calibration, followed by periodic recalibration. Recalibration using arm-cuff BP monitors is not practical during everyday activities. In this study, we investigated recalibration using PTT-based BP monitoring aided by a deep neural network (DNN) and validated the performance achieved with more practical wrist-cuff BP monitors. The PTT-based prediction produced a mean absolute error (MAE) of 4.746 ± 1.529 mmHg for systolic blood pressure (SBP) and 3.448 ± 0.608 mmHg for diastolic blood pressure (DBP) when tested with an arm-cuff monitor employing recalibration. Recalibration clearly improved the performance of both DNN and conventional linear regression approaches. We established that the periodic recalibration performed by a wrist-worn BP monitor could be as accurate as that obtained with an arm-worn monitor, confirming the suitability of wrist-worn devices for everyday use. This is the first study to establish the potential of wrist-cuff BP monitors as a means to calibrate BP monitoring devices that can reliably substitute for arm-cuff BP monitors. With the use of wrist-cuff BP monitoring devices, continuous BP estimation, as well as frequent calibrations to ensure accurate BP monitoring, are now feasible., Competing Interests: Conflict of interestAll authors have no conficts of interest relevant to this study to disclose, (© Korean Society of Medical and Biological Engineering 2023.)

The skin is a dynamic ecosystem on which diverse microbes reside. The interkingdom interaction between microbial species in the skin microbiota is thought to influence the health and disease of the skin although the roles of the intra- and interkingdom interactions remain to be elucidated. In this context, the interactions between Malassezia and Staphylococcus , the most dominant microorganisms in the skin microbiota, have gained attention. This study investigated how the interaction between Malassezia and Staphylococcus affected the antifungal susceptibility of the fungus to the azole antifungal drug ketoconazole. The susceptibility was significantly decreased when Malassezia was co-cultured with Staphylococcus . We found that acidification of the environment by organic acids produced by Staphylococcus influenced the decrease of the ketoconazole susceptibility of M. restricta in the co-culturing condition. Furthermore, our data demonstrated that the significant increased ergosterol content and cell membrane and wall thickness of the M. restricta cells grown in the acidic environment may be the main cause of the altered azole susceptibility of the fungus. Overall, our study suggests that the interaction between Malassezia and Staphylococcus influences the antifungal susceptibility of the fungus and that pH has a critical role in the polymicrobial interaction in the skin environment.

Invited for this month's cover is a combined work of the Korea Research Institute of Chemical Technology together with the Chungnam National University, the University of California, Irvine, and Chung-Ang University. The cover shows the effective thermal management of a vehicle interior through the wrapping of stretchable passive radiative cooling film. Thermoplastic polyurethane (TPU) cooler film with a hierarchical porous structure shows a dramatic cooling effect compared to commercial paint in sunny, hot weather. The Research Article itself is available at 10.1002/cssc.202201842., (© 2022 Wiley-VCH GmbH.)

Current research has focused on effective solutions to mitigate global warming and the accelerating greenhouse gas emissions. Compared to most cooling methods requiring energy and resources, passive daytime radiative cooling (PDRC) technology offers excellent energy savings as it requires no energy consumption. However, existing PDRC materials encounter unprecedented problems such as complex structures, low flexibility, and performance degradation after stretching. Thus, this study reports a porous structured thermoplastic polyurethane (TPU) film with bimodal pores to produce high-efficiency PDRC with efficient solar scattering using a simple process. The TPU film exhibited an adequately high solar reflectivity of 0.93 and an emissivity of 0.90 in the atmospheric window to achieve an ambient cooling of 5.6 °C at midday under a solar intensity of 800 W m -2 . Thus, the highly elastic and flexible TPU film was extremely suitable for application on objects with complex shapes. The radiative cooling performance of 3D-printed models covered with these TPU films demonstrated their superior indoor cooling efficiency compared to commercial white paint (8.76 °C). Thus, the proposed design of high-efficiency PDRC materials is applicable in various urban infrastructural objects such as buildings and vehicles., (© 2022 Wiley-VCH GmbH.)

We report the growth of CeIrIn 5 thin films with different crystal orientations on a MgF 2 (001) substrate using pulsed laser deposition technique. X-ray diffraction analysis showed that the thin films were either mainly a- axis-oriented (TF1) or a combination of a - and c -axis-oriented (TF2). The characteristic features of heavy-fermion superconductors, i.e. Kondo coherence and superconductivity, were clearly observed, where the superconducting transition temperature ( T c ) and Kondo coherence temperature ( T coh ) are 0.58 K and 41 K for TF1 and 0.52 K and 37 K for TF2, respectively. The temperature dependencies of the upper critical field ( H c 2 ) of both thin films and the CeIrIn 5 single crystal revealed a scaling behavior, indicating that the nature of unconventional superconductivity has not been changed in the thin film. The successful synthesis of CeIrIn 5 thin films is expected to open a new avenue for novel quantum phases that may have been difficult to explore in the bulk crystalline samples., (© 2022 IOP Publishing Ltd.)

Spontaneously ruptured hepatocellular carcinoma (srHCC) is a fatal complication of hepatocellular carcinoma (HCC). In addition, emergency treatment is frequently fraught with difficulties. This study aimed to investigate the prognosis and recurrence pattern in patients undergoing hepatectomy for the srHCC. This retrospective study included 11 patients with srHCC treated using either emergency hepatectomy or emergency transarterial embolization (TAE) followed by staged hepatectomy between January 2015 and December 2019. The patients visited the emergency room because of a sudden rupture of HCC without being diagnosed with HCC. We analyzed the prognosis, recurrence rate, and survival in these patients after hepatectomy. Four of the 11 patients in this study were classified as Child-Pugh class A and 7 as Child-Pugh class B. Nine patients visited for sudden onset of abdominal pain, and 2 for sudden onset of shock. The median hemoglobin level at the time of the visit was 11.5 g/dL (interquartile range: 9.8-12.7). Five patients underwent one-stage hepatectomy and 6 underwent emergency TAE hemostasis followed by staged hepatectomy. Median overall survival and recurrence-free survivals were 23 and 15 months, respectively. Recurrence occurred in 7 patients (4 in the one-stage group and 3 in the staged group). Among patients with recurrence, 6 had intrahepatic recurrence and 3 peritoneal metastases. Patients with srHCC who undergo staged hepatectomy can achieve a relatively good prognosis. The most common sites of recurrence after hepatectomy are intrahepatic and peritoneal. Peritoneal metastases are more likely to occur after one-stage hepatectomy., Competing Interests: The authors have no funding or conflicts of interest to disclose., (Copyright © 2022 the Author(s). Published by Wolters Kluwer Health, Inc.)

Studies on deep eutectic solvents (DESs), a new class of "green" solvents, are attracting increasing attention from researchers, as evidenced by the rapidly growing number of publications in the literature. One of the main advantages of DESs is that they are tailor-made solvents, and therefore, the number of potential DESs is extremely large. It is essential to have computational methods capable of predicting the physicochemical properties of DESs, which are needed in many industrial applications and research. Surface tension is one of the most important properties required in many applications. In this work, we report a relatively generalized artificial neural network (ANN) for predicting the surface tension of DESs. The database used can be considered comprehensive because it contains 1571 data points from 133 different DES mixtures in 520 compositions prepared from 18 ions and 63 hydrogen bond donors in a temperature range of 277-425 K. The ANN model uses molecular parameter inputs derived from the conductor-like screening model for real solvents ( S σ-profiles ). The training and testing results show that the best performing ANN architecture consisted of two hidden layers with 15 neurons each (9-15-15-1). The proposed ANN was excellent in predicting the surface tension of DESs, as R 2 values of 0.986 and 0.977 were obtained for training and testing, respectively, with an overall average absolute relative deviation of 2.20%. The proposed models represent an initiative to promote the development of robust models capable of predicting the properties of DESs based only on molecular parameters, leading to savings in investigation time and resources., Competing Interests: The authors declare no competing financial interest., (© 2022 The Authors. Published by American Chemical Society.)

The network structures of liquid crystal elastomers (LCEs) are crucial to impart rubbery behavior to LCEs and enable reversible actuation. Most LCEs developed to date are covalently linked, implying that the cross-links are fixed at a particular position. Herein, we report a new class of LCEs integrating polyrotaxanes (PRs) as slidable cross-links (PR-LCEs). Interestingly, the incorporation of a low loading (0.3-2.0 wt %) of the PR cross-linkers to the LCE causes a significant impact on various properties of the resulting PR-LCEs due to the pulley effect. The optimum PR loading is determined to be 0.5 wt %, at which point the toughness and damping behavior are maximized. The robust mechanical properties of the PR-LCE offers a superior actuation performance to that of the pristine LCE along with an excellent quadruple shape-memory effect. Furthermore, the incorporation of PR is useful to enhance the efficiency of shape-memory-assisted self-healing when heating above the nematic-isotropic transition.

Structural colors have advantages compared with chemical pigments or dyes, such as iridescence, tunability, and unfading. Many studies have focused on developing the ability to switch ON/OFF the structural color; however, they often suffer from a simple and single stimulus, remaining structural colors, and target selectivity. Herein, we present regionally controlled multistimuli-responsive structural color switching surfaces. The key part is the utilization of a micropatterned DNA-hydrogel assembly on a single substrate. Each hydrogel network contains a unique type of stimuli-responsive DNA motifs as an additional cross-linker to exhibit swelling/deswelling via stimuli-responsive DNA interactions. The approach enables overcoming the existing limitations and selectively programming the DNA-hydrogel to a decrypted state (ON) and an encrypted state (OFF) in response to multiple stimuli. Furthermore, the transitions are reversible, providing cyclability. We envision the potential of our method for diverse applications, such as sensors or anticounterfeiting, requiring multistimuli-responsive structural color switching surfaces.

Heart and respiration rates represent important vital signs for the assessment of a person's health condition. To estimate these vital signs accurately, we propose a multitask Siamese network model (MTS) that combines the advantages of the Siamese network and the multitask learning architecture. The MTS model was trained by the images of the cheek including nose and mouth and forehead areas while sharing the same parameters between the Siamese networks, in order to extract the features about the heart and respiratory information. The proposed model was constructed with a small number of parameters and was able to yield a high vital-sign-prediction accuracy, comparable to that obtained from the single-task learning model; furthermore, the proposed model outperformed the conventional multitask learning model. As a result, we can simultaneously predict the heart and respiratory signals with the MTS model, while the number of parameters was reduced by 16 times with the mean average errors of heart and respiration rates being 2.84 and 4.21. Owing to its light weight, it would be advantageous to implement the vital-sign-monitoring model in an edge device such as a mobile phone or small-sized portable devices.

Graphite is the most popular anode material for lithium-ion batteries (LIBs) owing to its high reversibility and stable cycling performance. With the rapid growth of the global electric vehicle (EV) market, it has become necessary to improve the quick-charge performance of graphite to reduce the charging time of LIBs. Therefore, from a structural viewpoint, it is crucial to control interfacial reactions and stabilize the surface of graphite to improve the sluggish interfacial kinetics. Herein, we propose a facile approach for integrating functional metal oxides on the surface of natural graphite (NG) via a surface-coating technique in combination with a facile-crystallization process. The functionality of the metal oxides, i.e., MoO 2 and Fe 3 O 4 , on the surface of NG was thoroughly investigated based on various structural and electrochemical analyses. The results demonstrate that the metal oxides play critical roles in stabilizing the surface of NG and facilitating faster Li + migration at the interface between NG and the electrolyte during cycling. In particular, the full cell configured with the c-Fe 3 O 4 -NG anode shows remarkably improved charging behavior (3 C charging-1 C discharging) without any significant loss of reversible capacity during 300 cycles. This study has conclusively established that tailoring the surface of NG with functional metal oxides would be a utilitarian way to improve the charging capability of NG. We are confident that the study results would provide utilitarian insights into the development of advanced LIBs for successful implementation in EV applications in the future.

The term 'pregnancy-associated breast cancer' is no longer used as it has been consistently reported that breast cancer during pregnancy and breast cancer after delivery (postpartum breast cancer) have different characteristics and prognosis. The purpose of this study is to define postpartum breast cancer by analyzing the incidence rate, related factors, and prognosis according to the timing of breast cancer. Data from the Korean National Health Insurance Service were used to analyze 1,292,727 women aged 20-49 years who birthed their first child between 2007 and 2012. The annual incidence rate of breast cancer after delivery increased every year (7.7 per 10,000 person-years after 5 years, 19.36 per 10,000 person-years after 10 years). The risk of breast cancer was significantly higher (hazard ratio 1.15, 95% CI 1.05-1.27, P=0.0037) in women diagnosed with gestational diabetes, but that was not associated with overall survival (OS). Patients diagnosed with breast cancer within 5 years of delivery had a poorer prognosis than those diagnosed later (5-year OS, <5 years: 91.1% vs. 5-10 years: 96.0%). In multivariate analysis of OS, the hazard ratio of patients diagnosed within 5 years after delivery was twice as high as of patients diagnosed between 5 and 10 years. Women diagnosed with gestational diabetes had an increased risk of breast cancer. Breast cancer patients diagnosed within 5 years of delivery had a poorer prognosis than those diagnosed later. In this regard, careful screening for early diagnosis of high-risk patients and intensive research on new treatment strategies are needed., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2022 Park, Lee, Yoon, Kim, Park, Youn, Lee, Lee, Lee, Hur, Jeong, Kim and Bae.)

Background: This cross-sectional study evaluated women's attitudes toward the certification logos, labels, and advertisements for organic disposable sanitary pads (OSPs) and investigated what could be the main reason for them. Additionally, the present study examined whether a relationship could be found between these attitudes and OSPs purchasing behavior., Methods: This study was conducted using a self-reported online survey of Korean adult women who have purchased OSPs. The study questionnaire had four sections, covering (1) characteristics of OSP purchasing behavior, (2) attitudes toward OSP certification logos, labels, and advertisements, (3) demand on government and companies for proper management, and (4) respondent's sociodemographic information. The Cronbach's alpha value of the questionnaire was 0.857., Results: A total of 500 respondents completed the questionnaire. Overall, high reliability was found for the certification logos (3.73 ± 0.61), labels on the product packaging (3.71 ± 0.63), and advertisements of OSPs (3.41 ± 0.62). Respondents indicated that these had fairly positive effects on their decision-making regarding product reliability, product image, and their own purchasing behavior. The aspects most frequently affected from the informants were safety to human health. All attitudes toward OSP certification logos, labels, and advertisements that were evaluated in this study became more positive in the direction from non-buyers to occasional buyers and to habitual buyers (all P < 0.05). The most significant demand from the respondents for OSP companies and the government was to clearly indicate hazardous ingredients on the OSP packaging (42.0%) and to strengthen the sanctions for false advertising (37.8%), respectively., Conclusions: The results of this study clearly indicate the importance of using certification logos, labels, and advertisements in the OSP market. These results can be utilized by OSP companies to improve the effectiveness of their marketing strategies or by policy makers and certifying bodies to manage the informants properly in the OSP market., (© 2022. The Author(s).)

Backgrounds: In this study, we evaluated the incidence and outcomes of pregnancy after breast cancer was diagnosed in women of childbearing age. Additionally, we evaluated the prognosis of patients who became pregnant after breast cancer, according to the treatment., Methods: This was a retrospective cohort study of women aged 20-45 years who were surgically treated for breast cancer between 2004 and 2014 using the Korean National Health Insurance database. The patients were classified into six groups according to the treatment. Propensity score matching was applied to the cohort to analyze the risk of breast cancer-associated mortality after pregnancy and childbirth., Results: Of the 45,765 patients who had been newly diagnosed with breast cancer, 1826 (4%) became pregnant after breast cancer diagnosis. Among the pregnant group, the HR of the risk of death was 0.15 (95% CI, 0.06 to 0.36) for patients who became pregnant ≥49 months after the diagnosis. In patients who received endocrine therapy and chemotherapy, the pregnant group had better prognosis than the non-pregnant group. There was no significant difference between the pregnant group and the non-pregnant group in patients who received chemotherapy and trastuzumab with or without endocrine therapy., Conclusion: The risk of death was low in women who became pregnant ≥49 months after the diagnosis of breast cancer. The prognosis of pregnant women was non-inferior to that of non-pregnant women, even in women who received trastuzumab. These findings provide reassurance to patients with HER2-positive cancer who are considering future pregnancy., (Copyright © 2022 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Micro/nanofluidic platforms with nanoporous films have been utilized as research tools for studying electrokinetic phenomena occurring not only in macro-scale systems such as electro-desalination but also in micro-scale systems such as bio-molecular preconcentrators. However, due to the limitations of fabrication techniques, studies with nanoporous films are mainly limited to vary the physicochemical properties of the films such as surface charge and pore size, despite the enormous effect of the membrane morphology on the phenomena that is to be expected. Therefore, we propose an economic and feasible nanofabrication method called the "adhesive lift method" for patterning thin arbitrarily-shaped nanoporous film to integrate it into micro/nanofluidic platforms. The conformal patterning of the nanoporous films (Nafion or poly(3,4-ethylenedioxythiophene)polystyrene sulfonate (PEDOT:PSS) in this work) was accomplished with spin coating, oxygen plasma treatment and the "adhesive lift technique". Using the fabricated platforms, the initiation of ion concentration polarization along the film with various shapes was demonstrated. In particular, various electrokinetic characteristics of overlimiting conductance depending on the length scale of the microchannels were successfully demonstrated. Therefore, the presented adhesive lift method would provide platforms which can nearly mimic practical macro-scale fluidic systems so that the method would be very useful for studying various electrokinetic phenomena inside it.

Rationale: Gangliocytic paraganglioma (GP) is a rare tumor that mostly develops in the duodenum and is composed of the following 3 cell types: epithelioid endocrine, spindle-like, and ganglion-like cells. It manifests as symptoms such as abdominal pain, gastrointestinal bleeding, and weight loss; however, occasionally, it is incidentally detected on endoscopic or radiologic examinations. Although GP is usually benign, it can metastasize to the lymph nodes, and distant metastases have been reported in some cases., Patient Concerns: A 46-year-old woman presented with anemia on health surveillance examination. She had no other specific symptoms, and her physical examination did not reveal any abnormal finding., Diagnosis: Endoscopic ultrasound-guided fine-needle aspiration biopsy was performed, and the endoscopist obtained samples from the inner side of the ampullary mass. Pathological examination suggested GP or a neuroendocrine tumor., Interventions: Initially, we planned transduodenal ampullectomy with lymph node excision. However, there was severe fibrosis around the duodenum, and an examination of a frozen biopsy sample from the periduodenal lymph node showed atypical cells in the lymph node. Therefore, we performed pylorus-preserving pancreaticoduodenectomy with lymph node dissection., Outcomes: The final pathological diagnosis was GP located in the ampulla of Vater. The GP showed lymphovascular and perineural invasion and invaded the duodenal wall. Furthermore, 4 out of 18 harvested lymph nodes showed metastasis., Lessons: We described a case of GP confined to the ampulla with regional lymph node metastasis and reviewed published literature on ampullary GP with lymph node metastasis., Competing Interests: The authors have no funding and conflicts of interest to disclose., (Copyright © 2022 the Author(s). Published by Wolters Kluwer Health, Inc.)

Most transparent conducting materials are based on Sn:In 2 O 3 (ITO). When applied onto flexible substrates, ITO can be prepared in an oxide-metal-oxide (OMO) configuration, typically ITO/Ag/ITO, where the ductility of the embedded metal layer is intended to reduce the mechanical brittleness and improve the electrical conductivity of the OMO multilayer. Hitherto, the lower limit of the thickness of the Ag layer has been limited by the percolation threshold, which limits the Ag layer to be thicker than ∼10 nm to avoid agglomeration and to ensure conductivity and structural stability. Metal layers of thicknesses below 10 nm are, however, desirable for obtaining OMO coatings with better optical properties. It is known that agglomeration of the metal layer can, to some extent, be suppressed when substituting Ag by an Ag-Pd-Cu (APC) alloy. APC-based OMO films exhibit excellent optical and electrical properties, but still continuous APC films well below 10 nm thickness cannot be achieved. In this work we demonstrate that controlled oxidation of APC results in smooth, ultrathin APC:O continuous coatings (of thickness ∼5 nm) on ITO-coated PET substrates. Moderate oxidation yields superficial PdO x formation, which suppresses Ag agglomeration, while still maintaining excellent conductivity. On the other hand, extensive oxidation of APC leads to extensive Pd oxide nucleation deteriorating the conductivity of the film. The ITO/APC:O/ITO films exhibit low resistivity, attributed to a high Hall mobility associated with suppressed agglomeration, good stability in high humidity/temperature environments, superior transmittance in the visible and infrared region, and excellent mechanical bending properties, thus providing new opportunities for fabricating superior transparent conducting coatings on polymer substrates.

Vitrimers have shown advantages over conventional thermosets via capabilities of dynamic network rearrangement to endow repairability as well as recyclability. Based on such characteristics, vitrimers have been studied and have shown promises as a 3D printing ink material that can be recycled with the purpose of waste reduction. However, despite the brilliant approaches, there still remain limitations regarding requirement of new reagents for recycling the materials or reprintability issues. Here, a new class of a 4D printable vitrimer that is translated from a commercial poly(ε-caprolactone) (PCL) resin is reported to exhibit self-healability, weldability, reprocessability, as well as reprintability. Thus, formed 3D-printed vitrimer products show superior heat resistance in comparison to commercial PCL prints, and can be repeatedly reprocessed or reprinted via filament extrusion and a handheld fused deposition modeling (FDM)-based 3D printing method. Furthermore, incorporation of semicrystalline PCL renders capabilities of shape memory for 4D printing applications, and as far as it is known, such demonstration of FDM 3D-printed shape memory vitrimers has not been realized yet. It is envisioned that this work can fuel advancement in 4D printing industries by suggesting a new material candidate with all-rounded capabilities with minimized environmental challenges., (© 2021 The Authors. Advanced Science published by Wiley-VCH GmbH.)

This study evaluated the incidence, the survival outcomes and its prognostic factors for male breast cancer (MBC) in Korea. Using the National Health Insurance Service database of Korea, we identified MBC patients who had the new claim code of C50. Medical records including type of surgeries and radiotherapy within one year of the first claim and death records were reviewed. Between 2005 and 2016, 838 newly diagnosed MBC patients were included (median follow-up, 1,769 days). The 70-74-year age group had the highest incidence of MBC. The 5-year survival rate was 73.7%. Age > 65 years, low income, no surgical intervention, no tamoxifen use, and > 2 comorbidities correlated with a worse outcome. MBC incidence has increased over time, and its peak is noted at age > 70 years. Age > 65 years, > 2 comorbidities, no surgical intervention, and no tamoxifen use correlate to poor prognosis., Competing Interests: The authors declare that they have no competing interests., (© 2021 Korean Breast Cancer Society.)

For enhancing the performance and long-term stability of perovskite solar cell (PSC) devices, interfacial engineering between the perovskite and hole-transporting material (HTM) is important. We developed a fluorinated conjugated polymer PFPT3 and used it as an interfacial layer between the perovskite and HTM layers in normal-type PSCs. Interaction of perovskite and PFPT3 via Pb-F bonding effectively induces an interfacial dipole moment, which resulted in energy-level bending; this was favorable for charge transfer and hole extraction at the interface. The PSC device achieved an increased efficiency of 22.00% with an open-circuit voltage of 1.13 V, short-circuit current density of 24.34 mA/cm 2 , and fill factor of 0.80 from a reverse scan and showed an averaged power conversion efficiency of 21.59%, which was averaged from forward and reverse scans. Furthermore, the device with PFPT3 showed much improved stability under an 85% RH condition because hydrophobic PFPT3 reduced water permeation into the perovskite layer, and more importantly, the enhanced contact adhesion at the PFPT3-mediated perovskite/HTM interface suppressed surface delamination and retarded water intrusion. The fluorinated conjugated polymeric interfacial material is effective for improving not only the efficiency but also the stability of the PSC devices.

Purpose: In this study, we compared the prognoses of patients who underwent mastectomy with immediate breast reconstruction (IBR) after neoadjuvant chemotherapy with those who underwent mastectomy., Methods: This retrospective study included 87,995 patients who were surgically treated for primary breast cancer between 2008 and 2014. We compared the three groups of patients who were divided based on the following surgeries: breast-conserving surgery (BCS), mastectomy, and mastectomy with IBR., Results: Of the 3295 patients who were treated with neoadjuvant chemotherapy, 482 patients achieved a pathological complete response (pCR) and 2813 patients did not (non-pCR). In survival analysis of the pCR patients, the 5-year Overall Survival (5 yr OS) between those who underwent mastectomy with IBR and mastectomy (P = 0.639) In the non-pCR group, 5 yr OS of the mastectomy with IBR group was 90.0%, while those of the mastectomy group was 84.4% in patients with clinical stage II (P = 0.032). In a multivariate analysis by Cox regression method revealed that the prognoses of the patients who underwent mastectomy with IBR were not different from those of patients who underwent mastectomy group in both groups (the pCR group and the non-pCR group)., Conclusion: In the pCR group, the prognoses of patients who underwent mastectomy with IBR were not different from those of patients who underwent mastectomy. In the non-pCR group, women in the mastectomy with IBR group had shown worse prognoses than the mastectomy group in advanced clinical stage. Appropriate operation should be determined depending on the status of individualized patients.

Liquid crystal elastomers (LCEs) are broadly recognized as programmable actuating materials that are responsive to external stimuli, typically heat or light. Yet, soft LCEs that respond to changes in environmental humidity are not reported, except a few examples based on rigid liquid crystal networks with limited processing. Herein, a new class of highly deformable hygroscopic LCE actuators that can be prepared by versatile processing methods, including surface alignment as well as 3D printing is presented. The dimethylamino-functionalized LCE is prepared by the aza-Michael addition reaction between a reactive LC monomer and N,N'-dimethylethylenediamine as a chain extender, followed by photopolymerization. The humidity-responsive properties are introduced by activating one of the LCE surfaces with an acidic solution, which generates cations on the surface and provides asymmetric hydrophilicity to the LCE. The resulting humidity-responsive LCE undergoes programmed and reversible hygroscopic actuation, and its shape transformation can be directed by the cut angle with respect to a nematic director or by localizing activation regions in the LCE. Most importantly, various hygroscopic LCE actuators, including (porous) bilayers, a flower, a concentric square array, and a soft gripper, are successfully fabricated by using LC inks in UV-assisted direct-ink-writing-based 3D printing., (© 2021 Wiley-VCH GmbH.)

Purpose: Raloxifene is a selective estrogen receptor modulator (SERM), and raloxifene treatment for osteoporosis is reimbursable under the Korean National Health Insurance. Evidence suggests that SERMs use reduces the risk of breast cancer in Asian population. Herein, we retrospectively investigated the protective effect of raloxifene on breast cancer rates in Korean population., Methods: Using the Health Insurance Review and Assessment Service database, we selected women with osteoporosis aged 50 years and above. Patients treated for at least 2 years with raloxifene were assigned to the user group, whereas the remaining patients were assigned to the non-user group. The effect on breast cancer risk was assessed using the Cox proportional-hazards model with a time-dependent covariate to adjust for immortal time bias., Results: A total of 322,870 women who were registered between 2010 and 2011 were included. The user group comprised 0.7% (n = 2,307) of the total population. The mean age was 65.7 ± 8.0 years and 67.2 ± 8.6 years in the user and non-user groups, respectively ( p < 0.001). There was no difference in the previous use of estrogen replacement between the 2 groups ( p = 0.087). The incidence of breast cancer per 1,000 person-years was 0.49 (n = 8) and 0.68 (n = 1,714) in the user and non-user groups, respectively (hazard ratio [HR], 0.63, 95% confidence interval [CI], 0.32-1.27). HR decreased with increase in the treatment duration, but this change was not statistically significant (HR, 1.00, 95% CI, 0.32-3.11 in 2-3 years; HR, 0.63, 95% CI, 0.20-1.94 in 3-4 years; and HR, 0.41, 95% CI, 0.10-1.65 in 4-5 years)., Conclusion: Long-term treatment with raloxifene in women with osteoporosis was not significantly associated with a reduction in breast cancer rates. However, further investigation is required for a conclusive proof., Competing Interests: The authors declare that they have no competing interests., (© 2021 Korean Breast Cancer Society.)

Malassezia is the most abundant genus in the fungal microflora found on human skin, and it is associated with various skin diseases. Among the 18 different species of Malassezia that have been identified to date, M. restricta and M. globosa are the most predominant fungal species found on human skin. Several studies have suggested a possible link between Malassezia and skin disorders. However, our knowledge on the physiology and pathogenesis of Malassezia in human body is still limited. Malassezia is unable to synthesize fatty acids; hence, it uptakes external fatty acids as a nutrient source for survival, a characteristic compensated by the secretion of lipases and degradation of sebum to produce and uptake external fatty acids. Although it has been reported that the activity of secreted lipases may contribute to pathogenesis of Malassezia , majority of the data were indirect evidences; therefore, enzymes' role in the pathogenesis of Malassezia infections is still largely unknown. This review focuses on the recent advances on Malassezia in the context of an emerging interest for lipases and summarizes the existing knowledge on Malassezia , diseases associated with the fungus, and the role of the reported lipases in its physiology and pathogenesis.

Breast cancer is the most common malignancy in Korean women, and its incidence continues to increase. The Korean Breast Cancer Society (KBCS) established a nationwide breast cancer database through its online enrollment program in 1996. This study aimed to analyze the clinical characteristics of breast cancer in Korea, and to assess the pattern of changes in breast cancer management in 2018. We analyzed the KBCS and Korea Central Cancer Registry (KCCR) databases in 2018. In 2018, 28,157 patients were newly diagnosed with breast cancer, of whom 4,510 had noninvasive breast cancer and 23,647 had invasive breast cancer. The age-standardized rate of breast cancer in 2018 was 79.0 per 100,000 women (65.6 invasive, 13.4 noninvasive). The median age of female patients diagnosed with breast cancer in 2018 was 52 years, and the incidence of breast cancer was the highest in the 40-49-years age group (9,432 patients, 33.6%). The proportion of patients with stage 0 and stage I breast cancer continued to increase, accounting for 63.8% of cases, and breast-conserving surgery was performed more often than mastectomy (66.2% vs. 33.0%). The most common subtypes of breast cancer were hormone receptor [HR]-positive and human epidermal growth factor receptor-2 (HER2)-negative types (65.9% of cases), while the HR-negative and HER2-positive types accounted for 9.2% of cases. According to the KCCR data, from 2014 to 2018, the 5-year relative survival rate of patients with breast cancer was 93.3%, which was 14.0% higher than that from 1993 to 1995 (79.3%). The clinical characteristics of breast cancer in Korea have been changing, and national databases can improve our understanding of the disease characteristics of Korean women. Therefore, updating the KBCS registry is important for the effective management of breast cancer in Korea., Competing Interests: The authors declare that they have no competing interests., (© 2021 Korean Breast Cancer Society.)

Amyotrophic lateral sclerosis (ALS) is a neurodegenerative neuromuscular disease. Although genome-wide association studies (GWAS) have successfully identified many variants significantly associated with ALS, it is still difficult to characterize the underlying biological mechanisms inducing ALS. In this study, we performed a transcriptome-wide association study (TWAS) to identify disease-specific genes in ALS. Using the largest ALS GWAS summary statistic (n = 80,610), we identified seven novel genes using 19 tissue reference panels. We conducted a conditional analysis to verify the genes' independence and to confirm that they are driven by genetically regulated expressions. Furthermore, we performed a TWAS-based enrichment analysis to highlight the association of important biological pathways, one in each of the four tissue reference panels. Finally, utilizing a connectivity map, a database of human cell expression profiles cultured with bioactive small molecules, we discovered functional associations between genes and drugs to identify 15 bioactive small molecules as potential drug candidates for ALS. We believe that, by integrating the largest ALS GWAS summary statistic with gene expression to identify new risk loci and causal genes, our study provides strong candidates for molecular basis experiments in ALS.

A suture is a ubiquitous medical device to hold wounded tissues together and support the healing process after surgery. Surgical sutures, having incomplete biocompatibility, often cause unwanted infections or serious secondary trauma to soft or fragile tissue. In this research, UV/ozone (UVO) irradiation or polystyrene sulfonate acid (PSS) dip-coating is used to achieve a fibronectin (FN)-coated absorbable suture system, in which the negatively charged moieties produced on the suture cause fibronectin to change from a soluble plasma form into a fibrous form, mimicking the actions of cellular fibronectin upon binding. The fibrous fibronectin coated on the suture can be exploited as an engineered interface to improve cellular migration and adhesion in the region around the wounded tissue while preventing the binding of infectious bacteria, thereby facilitating wound healing. Furthermore, the FN-coated suture is found to be associated with a lower friction between the suture and the wounded tissue, thus minimizing the occurrence of secondary wounds during surgery. It is believed that this surface modification can be universally applied to most kinds of sutures currently in use, implying that it may be a novel way to develop a highly effective and safer suture system for clinical applications., (© 2021 Wiley-VCH GmbH.)

Splendid advancement of micro/nanofluidic researches in the field of bio- and chemical-analysis enables various ubiquitous applications such as bio-medical diagnostics and environmental monitoring, etc. In such devices, nanostructures are the essential elements so that the nanofabrication methods have been major issues since the last couple of decades. However, most of nanofabrication methods are sophisticated and expensive due to the requirement of high-class cleanroom facilities, while low-cost and biocompatible materials have been already introduced in the microfluidic platforms. Thus, an off-the-shelf and biodegradable material for those nanostructures can complete the concept of an eco-friendly micro/nanofluidic platform. In this work, biodegradable materials originated from well-known organisms such as human nail plate and denatured hen egg (albumen and yolk) were rigorously investigated as a perm-selective nanoporous membrane. A simple micro/nanofluidic device integrated with such materials was fabricated to demonstrate nanofluidic phenomena. These distinctive evidences (the visualization of ion concentration polarization phenomenon, ohmic/limiting/over-limiting current behavior and surface charge-governed conductance) can fulfill the requirements of functional nanostructures for the nanofluidic applications. Therefore, while these materials were less robust than nano-lithographically fabricated structures, bio-oriented perm-selective materials would be utilized as a one of key elements of the biodegradable and eco friendly micro/nanofluidic applications.

Twisted bilayer graphene (tBLG) has received substantial attention in various research fields due to its unconventional physical properties originating from Moiré superlattices. The electronic band structure in tBLG modified by interlayer interactions enables the emergence of low-energy van Hove singularities in the density of states, allowing the observation of intriguing features such as increased optical conductivity and photocurrent at visible or near-infrared wavelengths. Here, we show that the third-order optical nonlinearity can be considerably modified depending on the stacking angle in tBLG. The third-harmonic generation (THG) efficiency is found to significantly increase when the energy gap at the van Hove singularity matches the three-photon resonance of incident light. Further study on electrically tuneable optical nonlinearity reveals that the gate-controlled THG enhancement varies with the twist angle in tBLG, resulting in a THG enhanced up to 60 times compared to neutral monolayer graphene. Our results prove that the twist angle opens up a new way to control and increase the optical nonlinearity of tBLG, suggesting rotation-induced tuneable nonlinear optics in stacked two-dimensional material systems.

An oxide/metal/oxide (OMO) multi-structure, which has good electrical, optical, and mechanical stability, was studied as a potential replacement of polycrystalline In-Sn-O (ITO). However, the degradation of mechanical properties caused by the polycrystalline structure of the top layer forming on the polycrystalline metal layer needs to be improved. To address this issue, we introduced hydrogen in the oxide layers to form a stabilized amorphous oxide structure despite it being deposited on the polycrystalline layer. An ITO/Ag/ITO (IAI) structure was used in this work, and we confirmed that the correct amount of hydrogen introduction can improve mechanical stability without any deterioration in optical and electrical properties. The hydrogen presence in the IAI as intended was confirmed, and the assumption was that the hydrogen suppressed the formation of microcracks on the ITO surface due to low residual stress that came from decreased subgap level defects. This assumption was clearly confirmed with the electrical properties before and after dynamic bending testing. The results imply that we can adjust not only IAI structures with high mechanical stability due to the right amount of hydrogen introduction to make stabilized amorphous oxide but also almost all oxide/metal/oxide structures that contain unintended polycrystalline structures., Competing Interests: The authors declare that they have no conflict of interest., (This journal is © The Royal Society of Chemistry.)

Organic solar cells based on bulk heterojunctions (BHJs) are attractive energy-conversion devices that can generate electricity from absorbed sunlight by dissociating excitons and collecting charge carriers. Recent breakthroughs attained by development of nonfullerene acceptors result in significant enhancement in power conversion efficiency (PCEs) exceeding 17%. However, most of researches have focused on pursuing high efficiency of small-area (<1 cm 2 ) unit cells fabricated usually with spin coating. For practical application of organic photovoltaics (OPVs) from lab-scale unit cells to industrial products, it is essential to develop efficient technologies that can extend active area of devices with minimized loss of performance and ensured operational stability. In this progress report, an overview of recent advancements in materials and processing technologies is provided for transitioning from small-area laboratory-scale devices to large-area industrial scale modules. First, development of materials that satisfy requirements of high tolerability in active layer thickness and large-area adaptability is introduced. Second, morphology control using various coating techniques in a large active area is discussed. Third, the recent research progress is also underlined for understanding mechanisms of OPV degradation and studies for improving device long-term stability along with reliable evaluation procedures., (© 2020 Wiley-VCH GmbH.)

The separation of nanoparticles has drawn critical attention in various microfluidic applications including chemical analysis, diagnostics and environmental monitoring. Thus, a number of nanoparticle separation methods have been extensively proposed. However, most of the conventional methods require complicated structured devices, expensive manufacturing processes, and external power sources. While a spontaneous diffusiophoretic separation device based on an ion exchange mechanism could overcome such drawbacks, the recovery of separated particles and the inevitable development of an acidic environment due to the release of H+ from the cation exchange membrane limit its practical applicability. Therefore, in this work, we present a simple but robust nanoparticle separation method based on spontaneously induced diffusiophoresis, which is operated in a continuous manner to overcome the limitations of conventional methods. First, we confirmed that the particle exclusion distance followed the previously developed scaling law of diffusiophoresis. Consequently, we demonstrated the separation of nanoparticles of 40 nm, 200 nm and 2 μm diameter by utilizing the fact that the exclusion distances of various particles were proportional to their diffusiophoretic mobility. Furthermore, the use of Tris buffer increased the diffusiophoretic migration of nanoparticles due to the enhanced concentration gradient, and enabled the produced solution to be compatible with pH-sensitive bio-samples. Therefore, we expect this continuous and spontaneous diffusiophoretic separation platform to be useful in practical applications for analyzing various nano-meter scale bio-particles.

Background: Breast cancer is a heterogeneous disease with various histopathologic subtypes. Except for invasive carcinoma of no special type (NST), other subtypes are rare with limited data. The purpose of this study was to analyze the characteristics and prognosis of special histopathologic subtypes of breast cancer compared to NST., Methods: A total of 136,140 patients were analyzed using the Korean Breast Cancer Society Registry database between January 1996 and March 2019. The clinicopathologic features and survival outcomes of special type breast carcinoma were compared with those of NST., Results: The prevalence of special subtypes other than NST was 13.7% (n = 18,633). Compared to NST, patients with lobular, medullary, metaplastic, and micropapillary carcinoma had larger tumors (p < 0.001). Patients with mucinous, tubular, medullary, metaplastic, and cribriform carcinoma presented with less node metastasis (p < 0.001), contrary to patients with micropapillary carcinoma. Patients with lobular, mucinous, tubular, papillary, and cribriform carcinoma presented as luminal A subtype much more often (p < 0.001). Micropapillary carcinoma included more luminal B subtype (p < 0.001). Typically, medullary and metaplastic carcinoma included more triple-negative subtypes (p < 0.001). In survival analysis, only medullary (Hazard Ratio (HzR) 0.542, 95% CI 0.345 to 0.852, p = 0.008) and metaplastic carcinoma (HzR 1.655, 95% CI 1.317 to 2.080, p < 0.001) showed significantly different overall survival from NST by multivariate analysis., Conclusion: Breast cancer had distinct clinicopathologic features according to histopathologic subtype. However, special types of breast cancer had similar survival outcomes compared to NST when adjusting for other prognostic factors, except for metaplastic carcinoma and medullary carcinoma.

Understanding the effects of the chemical structures of donor polymers on the photovoltaic properties of their corresponding organic photovoltaic (OPV) devices under various light-intensity conditions is important for improving the performance of these devices. We synthesized a series of copolymers based on poly[(2,6-(4,8-bis(5-(2-thioethylhexyl)thiophen-2-yl)benzo[1,2- b :4,5- b ']dithiophene))- alt -(5,5-(1',3'-di-2-thienyl-5',7'-bis(2-ethylhexyl)benzo[1',2'- c :4',5'- c ']dithiophene-4,8-dione))] (PBDB-TS) and studied the effects of chlorine substitution of its thiophene-substituted benzodithiophene (BDT-Th) unit on its photovoltaic properties. Chlorination of the polymer resulted in a bulk heterojunction (BHJ) morphology optimized for efficient charge transport with suppressed leakage current and an increased open-circuit voltage of the OPV device; this optimization led to a remarkable enhancement of the OPV device's power conversion efficiency (PCE) not only under the condition of 1 sun illumination but also under a low light intensity mimicking indoor light; the PCE increased from 8.7% for PBDB-TS to ∼13% for the chlorinated polymers, PBDB-TS-3Cl, and PBDB-TS-4Cl under the 1 sun illumination condition and from 5.3% for PBDB-TS to 21.7% for PBDB-TS-4Cl under 500 lx fluorescence illuminance. Interestingly, although the OPV PCEs under 1 sun illumination were independent of the position of chlorine substitution onto the polymer, PBDB-TS-4Cl exhibited better performance under simulated indoor light than its derivative PBDB-TS-3Cl. Our results demonstrate that efficient light absorption and charge-carrier generation play key roles in achieving high OPV efficiency under low-light-intensity conditions.

Deterioration of our terrestrial environment due to decreasing soil quality brought on by crude oil spills and leakages is a major issue. In this study, soil samples were prepared by mixing clay (bentonite) and sand contaminated with 5 and 10 wt% crude oil (in order to study the effect of oil concentration), and weathered in a laboratory to simulate actual contaminated soil. Volatilization of light oil was inhibited in clay rich-soil, resulting in higher contamination after weathering. The efficiency of the pyrolytic treatment was evaluated by comparing the weight change and n-hexane extractable material (HEM) content of the soil samples. The working temperature influenced pyrolysis efficiency more than the reaction time. A residual amount of 0.29-0.61 wt% (below the soil pollution standard) was observed in the samples with high clay content and pollution level (by pyrolysis for 30 min at 400 °C). Infrared analysis of treated soil samples showed a reduction in alkyl functionality (CH), confirming a decrease in hydrophobicity and an improvement in water holding capacity (WHC). Seed germination and plant growth were relatively better in the pyrolyzed soil. The field applicability of the pyrolytic treatment process was confirmed at laboratory and pilot scale, as well as by treating soil samples collected from actual polluted sites., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

This article describes the breast cancer statistics in Korea, including the incidence, type of surgical procedure, stage, and molecular subtype, using the Korean Breast Cancer Society (KBCS) and Korea Central Cancer Registry data. There were a total of 26,534 new breast cancer diagnoses in 2017 in Korea, of which 4,139 were carcinoma in situ cases and 22,395 were invasive cancer cases. The age standardized rate of breast cancer was 75.3 per 100,000 women in 2017 (63.0 of invasive carcinoma and 12.3 of carcinoma in situ ), and it has been steadily increasing across all age groups. Breast cancer occurred most commonly in the 40-49 age group. Compared to 2016, breast conserving surgery (BCS) has increased, and 67.4% of patients were treated with BCS in 2017. The proportions of stage 0 and stage I have continued to increase, accounting for 60.7%. The most common subtype of breast cancer was hormone receptor (HR) positive and human epidermal growth factor receptor-2 (HER2) negative type comprising 65.9% of the cases, whereas HR negative and HER2 positive type was the rarest comprising 10.2% of the cases. The 5-year relative survival rate of breast cancer patients had increased by 14.0% from 79.2% in 1993-1995 to 93.2% in 2013-2017. It is essential to actively enter breast cancer data into the KBCS registry to improve our understanding., Competing Interests: Conflict of Interest: The authors declare that they have no competing interests., (© 2020 Korean Breast Cancer Society.)

Microenvironment responsive nanomaterials are attractive for therapeutic applications with regional specificity. Here we report pH responsive gold nanoparticles which are designed to aggregate in acidic condition similar to cancer environment and returned to its original disassembled states in a physiological pH. The pH responsive behavior of the particles is derived by change of electrostatic interaction among the particles where attraction and repulsion play a major role in low and high pH of the environment, respectively. Since different electrostatic interaction behavior of the particles in varied pH is induced not by irreversible chemical change but by simple protonation differences, the pH responsive process of assembly and disassembly is totally reversible. The low pH specific aggregation of gold nanoparticles resulted in red shift of plasmonic absorption peak and showed higher photothermal efficacy in acidic pH than in normal physiological pH. The low pH specific photothermal effect with long wave laser irradiation was directly applied to cancer specific photothermal therapy and resulted higher therapeutic effect for melanoma cancer cells than non-pH responsive gold nanoparticles.