Search

The dwindling availability of agricultural land, caused by factors such as rapid population growth, urban expansion, and soil contamination, has significantly increased the pressure on food production. To address this challenge, cultivating non-food crops on contaminated land has emerged as a promising solution. This approach not only frees up fertile soil for food production but also mitigates human exposure to contaminants. This work aimed to examine the impact of soil contamination with Cd, Pb, Ni, and Zn on the growth, productivity, metal accumulation, and the tolerance of five lignocellulosic non-food crops: switchgrass ( Panicum virgatum L.), biomass sorghum ( Sorghum bicolor L. Moench), giant reed ( Arundo donax L.), African fodder cane ( Saccharum spontaneum L. spp. aegyptiacum Willd. Hackel), and miscanthus ( Miscanthus × giganteus Greef et Deu.). A two-year pot experiment was conducted in Greece, Italy, and Portugal, following the same protocols and applying various levels of metals: Cd (0, 4, 8 mg kg -1 ), Pb and Zn (0, 450, 900 mg kg -1 ), and Ni (0, 110, 220 mg kg -1 ). The experimental design was completely randomized, with three replicates for each treatment. The results showed that switchgrass and sorghum generally maintained their height and productivity under Cd and Pb stress but were adversely affected by high Zn and Ni concentrations. Giant reed and African fodder cane showed reduced height and productivity at higher Ni and Zn levels. Miscanthus exhibited resilience in height but experienced productivity reductions only at the highest Zn concentration. Heavy metal uptake varied among crops, with switchgrass and sorghum showing high Cd and Pb uptake, while giant reed accumulated the most Cd and Zn. Miscanthus had the highest Ni accumulation. The tolerance indices indicated that switchgrass and sorghum were more tolerant to Cd and Zn at lower concentrations, whereas miscanthus had lower tolerance to Cd but a higher tolerance to Zn at higher concentrations. Giant reed and African fodder cane demonstrated stable tolerance across most heavy metals. Accumulation indices highlighted the effectiveness of switchgrass and sorghum in Cd and Pb uptake, while miscanthus excelled in Ni and Zn accumulation. The cluster analysis revealed similar responses to heavy metal stress between African fodder cane and giant reed, as well as between sorghum and miscanthus, with switchgrass displaying distinct behavior. Overall, the study highlights the differential tolerance and accumulation capacities of these crops, indicating the potential for phytoremediation applications and biomass production in heavy metal-contaminated soils.

Using contaminated land to grow lignocellulosic crops can deliver biomass and, in the long term, improve soil quality. Biostimulants and microorganisms are nowadays an innovative approach to define appropriate phytomanagement strategies to promote plant growth and metal uptake. This study evaluated biostimulants and mycorrhizae application on biomass production and phytoextraction potential of four lignocellulosic crops grown under two metal-contaminated soils. Two greenhouse pot trials were setup to evaluate two annual species (sorghum, hemp) in Italy and two perennial ones (miscanthus, switchgrass) in China, under mycorrhizae (M), root (B2) and foliar (B1) biostimulants treatments, based on humic substances and protein hydrolysates, respectively, applied both alone and in combination (MB1, MB2). MB2 increased the shoot dry weight (DW) yield in hemp (1.9 times more), sorghum (3.6 times more) and miscanthus (tripled) with additional positive effects on sorghum and miscanthus Zn and Cd accumulation, respectively, but no effects on hemp metal accumulation. No treatment promoted switchgrass shoot DW, but M enhanced Cd and Cr shoot concentrations (+84%, 1.6 times more, respectively) and the phytoextraction efficiency. Root biostimulants and mycorrhizae were demonstrated to be more efficient inputs than foliar biostimulants to enhance plant development and productivity in order to design effective phytomanagement strategies in metal-contaminated soil.

The aim of this study was to assess the phytoremediation potential of fiber flax ( Linum usitatissimatum L., var. Calista) cultivated in a soil contaminated with multiple metals, under real field conditions. A two-year (2022 and 2023) field experiment was conducted in a site contaminated with elevated concentrations of Cd, Ni, Cu, Pb, and Zn due to mining and metallurgical activities. Three different nitrogen fertilization levels were tested (N0: 0 kg N ha -1 , N1: 30 kg N ha -1 , N2: 60 kg N ha -1 ), and both spring and winter sowings were conducted. At full maturity, growth parameters and yields were measured. The phytoremediation potential of flax was assessed in terms of the metal concentrations in the above-ground biomass and of the metal uptake (i.e., the potential removal of the soil metals in g ha -1 and per year). Flax demonstrated a shorter growth cycle, with shorter and thicker plants and higher yields when sown in spring compared to winter sowing. Plant growth and productivity were not evidently influenced by additional nitrogen fertilization during plant growth. The cadmium bioaccumulation factor was 1.06, indicating that flax accumulates this metal. For Ni, Cu, Pb, and Zn, the corresponding values were 0.0, 0.04, 0.004, and 0.02, suggesting that this crop excludes these metals. The order of the higher uptake in plant tissues was as follows: Zn > Pb > Cd > Cu > Ni. In conclusion, flax demonstrated tolerance to heavy metals in the soil, effectively supporting soil restoration through cultivation. Additionally, flax showed potential as a cadmium accumulator while excluding nickel, copper, lead, and zinc.

The need of biofuels from biomass, including sustainable aviation fuel, without using agricultural land dedicated to food crops, is in constant demand. Strategies to intensify biomass production using mycorrhizal fungi, biostimulants and their combinations could be solutions for improving the cultivation of lignocellulosic plants but still lack well-established validation on metal-contaminated soils. This study aimed to assess the yield of Miscanthus x giganteus J.M. Greef & Deuter and Cannabis sativa L. grown on a metal-contaminated agricultural soil (11 mg Cd, 536 mg Pb and 955 mg Zn kg -1 ) amended with biostimulants and/or arbuscular mycorrhizal fungi, and the shoot Cd, Pb and Zn uptake. A pot trial was carried out with soil collected from a field near a former Pb/Zn smelter in France and six treatments: control (C), protein hydrolysate (a mixture of peptides and amino acids, PH), humic/fulvic acids (HFA), arbuscular mycorrhizae fungi (AMF), PH combined with AMF (PHxAMF), and HFA combined with AMF (HFAxAMF). Metal concentrations in the soil pore water (SPW), pH and electrical conductivity were measured over time. Miscanthus and hemp shoots were harvested on day 90. Both PH and PHxAMF treatments increased SPW Cd, Pb, and Zn concentrations (e.g. by 26, 1.9, and 22.9 times for miscanthus and 9.7, 4.7, and 19.3 times for hemp in the PH and PHxAMF treatments as compared to the control one, respectively). This led to phytotoxicity and reduced shoot yield for miscanthus. Conversely, HFA and HFAxAMF treatments decreased SPW Cd and Zn concentrations, increasing shoot yields for hemp and miscanthus. Shoot Cd, Pb, and Zn uptakes peaked for PH and PHxAMF hemp plants (in μg plant-1, Cd: 310-334, Pb: 34-38, and Zn: 232-309 for PHxAMF and PH, respectively), while lowest values occurred for PH miscanthus plants mainly due to low shoot yield. Overall, this study suggested that humic/fulvic acids can be an effective biostimulant for increasing shoot biomass production in a metal-contaminated soil. These results warrant further investigations of the HFAxAMF in field trials., Competing Interests: Declaration of competing interest The authors declare that there is no conflict of interest., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Quality control and traceability of Argan oil requires precise chemical characterization considering different provenances. The fatty acid profile is an essential parameter that certifies the quality and purity of Argan oil. In addition, stable isotopes were recently shown to be accurate as an indicator for geographical origin. In this study, fatty acid composition by gas chromatography (GC) and stable isotope ratio by isotope ratio mass spectrometry (IRMS) were investigated for classifying Argan oil according to its geographical origin. Forty-one Argan oil samples, belonging to six geographical origins of Moroccan natural Argan population (Safi, Essaouira, Agadir Ida Outanane, Taroudant, Tiznit and Sidi Ifni) were collected and extracted under the same conditions. The results show that the isotope δ 13 C, palmitic acid (C16:0), linoleic acid (C18:2) and unsaturated fatty acids (UFA) were strongly influenced by ecological parameters. Linear discriminant analysis (LDA) was performed to discriminate the six studied provenances. Discriminant models predicted the origin of Argan oil with 92.70% success. Samples from Safi, Essaouira and Agadir Ida Outanane presented the highest classification rate (100%). In contrast, the lowest rate was reported for samples from Tiznit (85.70%). The findings obtained for fatty acids and isotope combination might be considered as an accurate tool for determining the geographical origins of Argan oil. Moreover, they can potentially be used as specific markers for oils labeled with Protected Geographical Indication (PGI).