Search

Even though analysis of peritoneal fluids (PF) is often requested to medical laboratories for biochemical and morphological tests, there is still no mutual agreement on what the most appropriate way is to manage PF samples and which tests should be appropriately executed. In this update, we tried to identify the most useful tests for PF analysis to establish best practice indications. We performed a literature review and examined available guidelines to select the most appropriate tests by an evidence-based approach. Accordingly, the basic PF profile should include (1) serum to effusion albumin gradient and (2) automated cell counts with differential analysis. This profile allows to determine the PF nature, differentiating between 'high-albumin gradient' and 'low-albumin gradient' effusions, which helps to identify the pathophysiological process causing the ascites formation. Restricted to specific clinical situations, additional tests can be requested as follows: PF lactate dehydrogenase (LDH) and glucose, to exclude (LDH) or confirm (glucose) secondary bacterial peritonitis; PF total protein, to differentiate ascites of cardiac origin from other causes; PF (pancreatic) amylase, for the identification of pancreatic ascites; PF bilirubin, when a choleperitoneum is suspected; PF triglycerides, in differentiating chylous from pseudochylous ascites and PF creatinine, to detect intraperitoneal urinary leakage., Competing Interests: Competing interests: None declared., (© Author(s) (or their employer(s)) 2024. No commercial re-use. See rights and permissions. Published by BMJ.)

Non-harmonization of laboratory results represents a concrete risk for patient safety. To avoid harms, it is agreed that measurements by in vitro diagnostic medical devices (IVD-MD) on clinical samples should be traceable to higher-order references and adjusted to give the same result. However, metrological traceability is not a formal claim and has to be correctly implemented, which in practice does not happen for a non-negligible number of measurands. Stakeholders, such as higher-order reference providers, IVD manufacturers, and External Quality Assessment organizers, have major responsibilities and should improve their contribution by unambiguously and rigorously applying what is described in the International Organization for Standardization 17511:2020 standard and other documents provided by the international scientific bodies, such as Joint Committee on Traceability in Laboratory Medicine and IFCC. For their part, laboratory professionals should take responsibility to abandon non-selective methods and move to IVD-MDs displaying proper selectivity, which is one of the indispensable prerequisites for the correct implementation of metrological traceability. The practicality of metrological traceability concepts is not impossible but relevant education and appropriate training of all involved stakeholders are essential to obtain the expected benefits in terms of standardization., (© 2024 Walter de Gruyter GmbH, Berlin/Boston.)

Background: BD Barricor ™ tubes have been proposed to decrease laboratory turnaround time (TAT). We analytically validated and then clinically verified these tubes for use with Abbott Alinity ™ and Siemens Atellica ® highly sensitive cardiac troponin I (hs-cTnI) assays., Methods: hs-cTnI measurements were undertaken in paired Barricor ™ and in-use PSTII ™ tubes on both systems. 359 matched samples with hs-cTnI levels between 3 and 15,000 ng/L (Atellica ® values) were used to assess the hemolysis rate and make method comparisons. 599 paired patient samples were collected on emergency department (ED) admission to compare the performance of the rapid acute myocardial infarction (AMI) rule-out strategy based on hs-cTnI concentrations lower than recommended thresholds (<4 ng/L Alinity ™ ; <5 ng/L Atellica ® ) when different tubes and systems were employed., Results: No between-tube differences in hemolysis rate were seen when free hemoglobin concentrations in plasma samples were ≥0.25 g/L, even if PSTII ™ showed a significant increase of hemolysis rate vs. Barricor ™ (31% vs. 22%, p=0.007) when a lower cut-off for hemolysis (≥0.11 g/L) was employed on the Atellica ® detection system. The alternate use of these tubes did not influence the hs-cTnI results obtained from either of the two assays, which remained markedly biased (~40%) irrespective of the tube used. The expected optimal ability of very low hs-cTnI values on ED admission for ruling out AMI was confirmed by using both systems regardless of the tube type., Conclusions: Barricor ™ and PSTII ™ tubes can provide analytically equivalent hs-cTnI results when used on either Alinity ™ or Atellica ® hs-cTnI assays., (Copyright © 2024 International Federation of Clinical Chemistry and Laboratory Medicine (IFCC). All rights reserved.)

To be accurate and equivalent among assays, laboratory results should be traceable to higher-order references and their quality should fulfill maximum allowable measurement uncertainty (MU) as defined to fit the intended clinical use. Accordingly, laboratory professionals should estimate and validate MU of performed tests using appropriate analytical performance specifications (APS). Current consensus supports the derivation of APS by using one of the three models established by the European Federation of Clinical Chemistry and Laboratory Medicine (EFLM) Strategic Conference held in Milan in 2014. It is recognized that some models are better suited for certain measurands than for others and the attention should be primarily directed towards their biological and clinical characteristics. Among others, model 3 should reflect the state of the art of the measurements that can be defined as the best analytical performance that is technically achievable. Taking serum C-reactive protein and ferritin as examples, here we describe the theoretical premises and the experimental protocol to be used to derive APS for MU when a measurand is allocated to this model. Although the model lacks a direct relationship with clinical outcomes, useful information about the in vitro diagnostic medical device performance and the average quality of provided results may be obtained., (© 2024 Walter de Gruyter GmbH, Berlin/Boston.)

In addition to the correct implementation of calibration traceability, the definition and fulfillment of maximum allowable measurement uncertainty (MAU) are essential in assuring that laboratory measurements are clinically usable. Across the entire calibration hierarchy, three major contributors to the measurement uncertainty (MU) budget are identified, starting with the higher-order reference providers, extending through the in vitro diagnostic (IVD) manufacturers and their processes for assigning calibrator values, and ending with medical laboratories generating the random variability of results reported to clinicians. To understand if it is possible to achieve MAU and, consequently, to fix the possible drawbacks, the definition of combined MU budget limits across the entire calibration hierarchy has a central role. In particular, quality specifications for MU of reference and commercial calibrator materials should be defined according to the MAU on clinical samples. All involved stakeholders (i.e., higher-order reference providers, IVD manufacturers, medical laboratories) should be prepared to improve their performance whenever the clinical application of the test is made questionable by the failure to achieve MAU., (© 2024 Walter de Gruyter GmbH, Berlin/Boston.)

Analytical performance specifications (APS) represent the criteria that specify the quality required for laboratory test information to satisfy clinical needs. In 2014 the European Federation of Clinical Chemistry and Laboratory Medicine (EFLM) considered timely to update the topic of APS by organizing a conference in Milan in which some strategic concepts were proposed. Here I summarize the essential points representing the EFLM Strategic Conference heritage and discuss the approaches that will permit us to become more concrete, including roles and main actions expected from each of involved stakeholders for contributing a quantum leap forward in the way of practicality of Milan consensus about APS., (© 2024 Walter de Gruyter GmbH, Berlin/Boston.)

Metabolic dysfunction-associated fatty liver disease (MAFLD) may progress to advanced liver fibrosis (ALF). We evaluated the diagnostic accuracy of a novel Liver Fibrosis Risk Index (LFRI) in MAFLD subjects using transient elastography (TE) as the reference method for liver fibrosis measurement and then the diagnostic performance of a new two-step non-invasive algorithm for the detection of ALF risk in MAFLD, using Fibrosis-4 (FIB-4) followed by LFRI and comparing it to the reference algorithm based on FIB-4 and TE. We conducted a prospective study on 104 MAFLD European adult subjects. All consenting subjects underwent TE and measurements of FIB-4 and LFRI. For FIB-4 and TE, validated cut-offs were used. An ROC analysis showed that LFRI diagnosed severe fibrosis with moderate accuracy in MAFLD subjects with a negative predictive value above 90%. Using the new algorithm with LFRI thresholds recommended by the manufacturer, the number of subjects classified into ALF risk groups (low, intermediate, or high) differed significantly when compared with the reference algorithm ( p = 0.001), with moderate agreement between them (weighted kappa (95% CI) = 0.59 (0.41-0.77)). To improve the performance of the LFRI-based algorithm, we modified cut-off points based on ROC curves obtained by dividing the study population according to the reference algorithm and observed no difference between algorithms ( p = 0.054) in categorizing ALF risk, with a slight increase in the total agreement (weighted kappa (95% CI) = 0.63 (0.44-0.82)). Our findings suggest that using the novel LFRI as a second-line test may represent a potential alternative for liver fibrosis risk stratification in MAFLD patients; however, modified cut-offs are needed to optimize its performance.

Objectives: According to ISO 15189:2022, analytical performance specifications (APS) should relate to intended clinical use and impact on patient care. Therefore, we aimed to develop a web application for laboratory professionals to calculate APS based on a simulation of the impact of measurement uncertainty (MU) on the outcome using the chosen decision limits, agreement thresholds, and data of the population of interest., Methods: We developed the "APS Calculator" allowing users to upload and select data of concern, specify decision limits and agreement thresholds, and conduct simulations to determine APS for MU. The simulation involved categorizing original measurand concentrations, generating measured (simulated) results by introducing different degrees of MU, and recategorizing measured concentrations based on clinical decision limits and acceptable clinical misclassification rates. The agreements between original and simulated result categories were assessed, and values that met or exceeded user-specified agreement thresholds that set goals for the between-category agreement were considered acceptable. The application generates contour plots of agreement rates and corresponding MU values. We tested the application using National Health and Nutrition Examination Survey data, with decision limits from relevant guidelines., Results: We determined APS for MU of six measurands (blood total hemoglobin, plasma fasting glucose, serum total and high-density lipoprotein cholesterol, triglycerides, and total folate) to demonstrate the potential of the application to generate APS., Conclusions: The developed data-driven web application offers a flexible tool for laboratory professionals to calculate APS for MU using their chosen decision limits and agreement thresholds, and the data of the population of interest., (© 2023 Walter de Gruyter GmbH, Berlin/Boston.)

It is important for external quality assessment materials (EQAMs) to be commutable with clinical samples; i.e., they should behave like clinical samples when measured using end-user clinical laboratory in vitro diagnostic medical devices (IVD-MDs). Using commutable EQAMs makes it possible to evaluate metrological traceability and/or equivalence of results between IVD-MDs. The criterion for assessing commutability of an EQAM between 2 IVD-MDs is that its result should be within the prediction interval limits based on the statistical distribution of the clinical sample results from the 2 IVD-MDs being compared. The width of the prediction interval is, among other things, dependent on the analytical performance characteristics of the IVD-MDs. A presupposition for using this criterion is that the differences in nonselectivity between the 2 IVD-MDs being compared are acceptable. An acceptable difference in nonselectivity should be small relative to the analytical performance specifications used in the external quality assessment scheme. The acceptable difference in nonselectivity is used to modify the prediction interval criterion for commutability assessment. The present report provides recommendations on how to establish a criterion for acceptable commutability for EQAMS, establish the difference in nonselectivity that can be accepted between IVD-MDs, and perform a commutability assessment. The report also contains examples for performing a commutability assessment of EQAMs., (© Association for Diagnostics & Laboratory Medicine 2023. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.)

Alanine aminotransferase (ALT) represents the first-level test to detect individuals with hepatocellular damage of any etiology. However, it has been highlighted that the lack of assay harmonization may lead to overdiagnosis and unnecessary further testing if guideline-recommended fixed cut-offs are uncritically employed. To solve the issue of ALT (dis)harmonization and improve the interpretation of its values, a series of urgent actions for documenting and validating metrological traceability of serum ALT measurements, as described in this paper, are no longer postponeable. It is time that all medical laboratory stakeholders ( in vitro diagnostic manufacturers, laboratorians, external quality assessment scheme organizers) actively co-operate to implement the ALT standardization in a concerted action following well-established theoretical assumptions and applying experimental approaches described in literature., (© 2023 Walter de Gruyter GmbH, Berlin/Boston.)

A secondary higher-order calibrator is required to be commutable with clinical samples to be suitable for use in the calibration hierarchy of an end-user clinical laboratory in vitro diagnostic medical device (IVD-MD). Commutability is a property of a reference material that means results for a reference material and for clinical samples have the same numeric relationship, within specified limits, across the measurement procedures for which the reference material is intended to be used. Procedures for assessing commutability have been described in the literature. This report provides recommendations for establishing a quantitative criterion to assess the commutability of a certified reference material (CRM). The criterion is the maximum allowable noncommutability bias (MANCB) that allows a CRM to be used as a calibrator in a calibration hierarchy for an IVD-MD without exceeding the maximum allowable combined standard uncertainty for a clinical sample result (umaxCS). Consequently, the MANCB is derived as a fraction of the umaxCS for the measurand. The suitability of an MANCB for practical use in a commutability assessment is determined by estimating the number of measurements of clinical samples and CRMs required based on the precision performance and nonselectivity for the measurand of the measurement procedures in the assessment. Guidance is also provided for evaluating indeterminate commutability conclusions and how to report results of a commutability assessment., (© American Association for Clinical Chemistry 2023. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.)

Objectives: Recently, Abbott Diagnostics marketed a new generation of Alinity enzyme assays, introducing a multiparametric calibrator [Consolidated Chemistry Calibrator (ConCC)] in place of or in addition to factor-based calibrations. For alkaline phosphatase (ALP), both calibration options are offered, i.e., with ConCC (ALP2) and with an experimental calibration factor (ALP2F). Both options are declared traceable to the 2011 IFCC reference measurement procedure (RMP). Before to replace the old generation (ALP1) with the new one, we decided to validate the trueness of ALP2/ALP2F., Methods: Three approaches were employed: (a) preliminary comparison on 48 native frozen serum samples with ALP1, of which traceability to RMP was previously successfully verified; (b) examination of three banked serum pools (BSP) with values assigned by RMP; (c) direct comparison with RMP on a set of 24 fresh serum samples. Bias estimation and regression studies were performed, and the standard measurement uncertainty associated with ALP measurements on clinical samples (u result ) was estimated and compared with established analytical performance specifications (APS). ConCC commutability was also assessed., Results: A positive proportional bias was found with both ALP2 and ALP2F when compared to ALP1 and RMP. This positive bias was confirmed on BSP: in average, +13.1 % for ALP2 and +10.0 % for ALP2F, respectively. u result were 13.28 % for ALP2 and 10.04 % for ALP2F, both not fulfilling the minimum APS of 4.0 %. Furthermore, ConCC was not commutable with clinical samples., Conclusions: Our results unearth problems in the correct implementation of traceability of Alinity ALP2/ALP2F, with the risk for the new assay to be unfit for clinical purposes., (© 2023 Walter de Gruyter GmbH, Berlin/Boston.)

Selecting appropriate laboratory tests based on available evidence is central to improve clinical effectiveness and impacting on patient outcome. Although long studied, there is no mutual agreement upon pleural fluid (PF) management in the laboratory context. Given the experienced confusion about the real contribution of laboratory investigations to guide clinical interpretation, in this update, we tried to identify useful tests for the PF analysis, aiming to unravel critical points and to define a common line in requesting modalities and practical management. We performed a careful literature review and a deepened study on available guidelines to finalize an evidence-based test selection, intended for clinicians' use to streamline PF management. The following tests depicted the basic PF profile routinely needed: (1) abbreviated Light's criteria (PF/serum total protein ratio and PF/serum lactate dehydrogenase ratio) and (2) cell count with differential analysis of haematological cells. This profile fulfils the primary goal to determine the PF nature and discriminate between exudative and transudative effusions. In specific circumstances, clinicians may consider additional tests as follows: the albumin serum to PF gradient, which reduces exudate misclassification rate by Light's criteria in patients with cardiac failure assuming diuretics; PF triglycerides, in differentiating chylothorax from pseudochylothorax; PF glucose, for identification of parapneumonic effusions and other causes of effusion, such as rheumatoid arthritis and malignancy; PF pH, in suspected infectious pleuritis and to give indications for pleural drainage; and PF adenosine deaminase, for a rapid detection of tuberculous effusion.

The Joint Committee for Traceability in Laboratory Medicine (JCTLM) currently lists the secondary commutable certified reference material (CRM) ERM DA-474/IFCC (DA-474) "C-Reactive Protein in Human Serum" and two generic immunoassay-based method principles as the basis for implementing the metrological traceability of C-reactive protein (CRP) measurements by end-user measurement procedures used by medical laboratories. The current metrological traceability has produced well harmonized results for clinical samples among different end-user measurement procedures. New higher-order pure substance and secondary commutable CRMs have been nominated for listing by the JCTLM. However, the data supporting performance of these new candidate CRMs, including use of new mass spectrometry based candidate reference measurement procedures (RMPs), was not clear regarding the influence that introducing these new CRMs would have on the current well harmonized results achieved with the existing metrological traceability to DA-474. The clinically relevant CRP measurand in blood serum or plasma is a pentamer of identical subunits, which adds complexity to the application of higher-order CRMs and RMPs. The JCTLM convened a workshop in December 2022 to review the appropriate implementation of metrological traceability of CRP measurements. The workshop consensus was that the extent-of-equivalence data must include considerations about the impact of a new CRM when used for its intended purpose in the calibration hierarchies of existing end-user measuring systems; and that a new RMP must compare results with another existing well validated candidate RMP or with a globally available end-user measurement system., (© 2023 the author(s), published by De Gruyter, Berlin/Boston.)

C-reactive protein (CRP) is a cytokine-mediated acute phase reactant with a recognized role in inflammatory conditions and infectious disease. In coronavirus disease 2019 (COVID-19), elevated CRP concentrations in serum were frequently detected and significantly associated with poor outcome in terms of disease severity, need for intensive care, and in-hospital death. For these reasons, the marker was proposed as a powerful test for prognostic classification of COVID-19 patients. In most of available publications, there was however confounding information about how interpretative criteria for CRP in COVID-19 should be derived, including quality of employed assays and optimal cut-off definition. Assuring result harmonization and controlling measurement uncertainty in terms of performance specifications are fundamental to allow worldwide application of clinical information according to specific CRP thresholds and to avoid risk of patient misclassification., (© 2023 Walter de Gruyter GmbH, Berlin/Boston.)

Objectives: There is conflicting evidence about the role of folate and B 12 in gestational diabetes mellitus (GDM) onset. The association of vitamin status with GDM was therefore revalued, also measuring the B 12 active form holotranscobalamin., Methods: 677 women were evaluated at 24-28 weeks of gestation when OGTT was carried out. The 'one-step' strategy was employed for GDM diagnosis. Odds ratio (OR) of having GDM was estimated to quantify the association with vitamin levels., Results: 180 women (26.6%) had GDM. They were older (median, 34.6 vs. 33.3 years, p = 0.019) and had higher body mass index (BMI) (25.8 vs. 24.1 kg/m 2 , p < 0.001). Multiparous women had lower levels of all evaluated micronutrients, while overweight lowered both folate and total B 12 , but not holotranscobalamin. Lower total B 12 (270 vs. 290 ng/L, p = 0.005), but not holotranscobalamin, was observed in GDM, being weakly negatively correlated with fasting glycemia (r = -0.11, p = 0.005) and 1-h OGTT serum insulin (r = -0.09, p = 0.014). At multivariate analysis, age, BMI and multiparity remained the strongest GDM predictors, while total B 12 (but not holotranscobalamin and folate) showed a slight protective effect (OR = 0.996, p = 0.038)., Conclusions: A weak association between total B 12 levels and GDM risk was shown, but it was not confirmed when holotranscobalamin was measured., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Equivalent results for the same measurand in clinical samples (CSs), measured using different end-user in-vitro diagnostic medical devices (IVD-MDs), are essential for the application of clinical practice guidelines for diagnosis, treatment, monitoring, or risk assessment. The International Organization for Standardization (ISO) document 17511:2020 specifies how to establish metrological traceability to the highest available reference system component to enable equivalent results among IVD-MDs. Commutability with CSs is an essential property of a reference material used as a calibrator in a calibration hierarchy. However, not all calibrators in a calibration hierarchy are required to be commutable; different calibration hierarchies have different requirements for which calibrators must be commutable with CSs. Because assessment of commutability is a substantial effort, it is therefore important to determine which calibrators need to be commutable when implementing a calibration hierarchy. We provide guidance on which calibrators must be commutable with CSs, when a correction for any noncommutability bias is appropriate, and when commutability of a calibrator with CSs is not required for various types of calibration hierarchies described in ISO 17511:2020., (© American Association for Clinical Chemistry 2023. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.)

New millennium diagnostic criteria for acute myocardial infarction precipitated a revolutionary shift from an approach based primarily on electrocardiography and clinical symptoms to a strategy based on biomarkers, and preferably cardiac troponins (cTn) I and T. In the last 20 years, clinical recommendations have strengthened the role of cTn and led to the development of highly sensitive (hs-cTn) assays, which are now leading players in all current clinical practice guidelines. To optimize the clinical use of these hs-cTn assays, focus on their analytical aspects has become increasingly important, emphasizing the need for the establishment of suitable analytical performance by the definition and implementation of appropriate specifications. An accurate estimate of measurement uncertainty, together with the acquisition of the highest analytical quality when very low concentrations of hs-cTn are measured, are essential requirements and should represent a practical laboratory standard in assuring optimal clinical use. Additional goals for further improving the quality of laboratory information should be the establishment of robust data concerning biological variation of cTn and the resolution of practical challenges opposed to the harmonization of cTn I results obtained by differing commercial measuring systems., (© 2023 Walter de Gruyter GmbH, Berlin/Boston.)

From External Quality Assessment data, current harmonization of CRP measuring systems appears to be satisfactory, the inter-assay CV being well below 10%. The inter-method variability is even better (close to 3%) when the widely used measuring systems are compared at CRP concentrations employed as cut-off for detecting sub-clinical infection (i.e., 10.0 mg/L) and measurement variability estimated, according to ISO 20914:2019 Technical Specification, from the intermediate within-lab reproducibility of 6-month consecutive measurement data. According to the state-of-the-art model (which is better suited for CRP), the maximum allowable measurement uncertainty (MAU) for CRP measurement on clinical samples with 10.0 mg/L concentrations is 3.76% (desirable quality). As measurement uncertainty (MU) of the only available reference material (ERM-DA474/IFCC) is ∼3%, to fulfil desirable MAU on clinical samples, IVD manufacturers should work to keep the contribution of remaining MU sources (commercial calibrator and intermediate within-lab reproducibility) lower than 2.3%., (© 2023 Walter de Gruyter GmbH, Berlin/Boston.)

Elevated liver enzyme activity may be associated with metabolic syndrome (MetS); however, it is not included in the MetS definition for children. Postprandial changes in the levels of biochemistry tests are related to manifestations of metabolic abnormalities. We assessed the association between fasting and postprandial liver enzymes levels with MetS and elevated hemoglobin A1c (HbA1c) in children aged 9-11. The study included 51 girls and 48 boys, all presumably healthy. In all participants' anthropometric indices, fasting glucose, insulin, lipid profile and HbA1c were measured. Enzymes, including alanine aminotransferase (ALT) and gamma-glutamyl transferase (GGT), were assayed in fasting and postprandial states. Individuals were divided into subgroups: with (MetS(+): n = 26); without MetS (MetS(-): n = 73); with HbA1c levels ≤ 5.3% (n = 39); and ≥5.7% (n = 11). Elevated fasting GGT levels were found in 23% of MetS(+) children and rarely in MetS(-) children; increased postprandial GGT was noted in 35% of MetS(+) individuals. Postprandial GGT changes tend to predict MetS (OR = 1.16; p = 0.092). Increased fasting ALT was found rarely in MetS(+) children, but did not occur in MetS(-) children. HbA1c ≥ 5.7% occurred rarely and neither fasting ALT nor GGT were related to elevated HbA1c. However, postprandial change of ALT was a good positive predictor of increased HbA1c (OR = 1.33; p = 0.021). Postprandial GGT performs better as an indicator of metabolic syndrome occurrence, and instead postprandial ALT may predict prediabetes in prepubertal children.

IVD manufacturers have total responsibility in terms of the traceability of marketed in vitro diagnostic medical devices (IVD-MD). This includes the provision of a quality control (QC) material as a part of the measuring system, suitable for traceability verification and alignment surveillance by end-users in daily practice. This material [to be used for the internal QC (IQC) component I as described in this paper] should have unbiased target values and an acceptability range corresponding to analytical performance specifications (APS) for suitable (expanded) measurement uncertainty (MU) on clinical samples. On the other hand, medical laboratories (by the IQC component II as described in this paper) should improve the IQC process and its judging criteria to establish a direct link between their performance, estimated as MU of provided results, and APS defined according to recommended models to apply corrective actions if the performance is worsening with the risk to jeopardize the clinical validity of test results. The participation to external quality assessment (EQA) programs that meet specific metrological criteria is also central to the evaluation of performance of IVD-MDs and of medical laboratories in terms of harmonization and clinical suitability of their measurements. In addition to the use of commutable materials, in this type of EQA it is necessary to assign values to them with selected reference procedures and to define and apply maximum allowable APS to substantiate the suitability of laboratory measurements in the clinical setting., (© 2022 the author(s), published by De Gruyter, Berlin/Boston.)

Objectives: Flat shaped glucose curves (FC) during oral glucose tolerance test (OGTT) in pregnant women (PW) are a not uncommon finding. We aimed to define the FC incidence in a large PW cohort and to describe the status of insulin and C-peptide secretion in women with FC when compared with a well-matched control group., Methods: 1050 PW performing OGTT for gestational diabetes screening were enrolled. An increase <6 % in plasma glucose (PG) during OGTT defined a FC. Serum samples for measuring insulin and C-peptide were also obtained., Results: 61 (5.8 %) women showed a FC. 60 of them, paired to a group of 60 no-FC women matched for age, body mass index and gestational age, were further investigated. C-peptide and insulin concentrations were significantly lower (P < 0.001) in FC in both 1-h and 2-h OGTT samples. When incremental area under the curves (AUC) normalized to PG were estimated, only AUC insulin remained however significantly lower. The insulin sensitivity index was higher in FC., Conclusions: PW with FC showed a hypersensitivity to insulin with normal β-cell function. Moreover, a delayed glucose absorption could be hypothesised because of the slight but continuously increasing shape of insulin curve found in FC group. Both phenomena could occur in parallel and contribute to FC., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.)

Laboratories should estimate and validate [using analytical performance specifications (APS)] the measurement uncertainty (MU) of performed tests. It is therefore essential to appropriately define APS for MU, but also to provide a perspective on suitability of the practical application of these APS. In this study, 23 commonly ordered measurands were allocated to the models defined during the 2014 EFLM Strategic Conference to derive APS for MU. Then, we checked if the performance of commercial measuring systems used in our laboratory may achieve them. Most measurands (serum alkaline phosphatase, aspartate aminotransferase, creatine kinase, γ-glutamyltransferase, lactate dehydrogenase, pancreatic amylase, total proteins, immunoglobulin G, A, M, magnesium, urate, and prostate-specific antigen, plasma homocysteine, and blood red and white cells) were allocated to the biological variation (BV) model and desirable APS were defined accordingly (2.65%, 4.75%, 7.25%, 4.45%, 2.60%, 3.15%, 1.30%, 2.20%, 2.50%, 2.95%, 1.44%, 4.16%, 3.40%, 3.52%, 1.55%, and 5.65%, respectively). Desirable APS for serum total cholesterol (3.00%) and urine albumin (9.00%) were derived using outcome-based model. Lacking outcome-based information, serum albumin, high-density lipoprotein cholesterol, triglycerides, and blood platelets were temporarily reallocated to BV model, the corresponding desirable APS being 1.25%, 2.84%, 9.90%, and 4.85%, respectively. A mix between the two previous models was employed for serum digoxin, with a 6.00% desirable APS. In daily practice by using our laboratory systems, 16 tests fulfilled desirable and five minimum APS, while two (serum albumin and plasma homocysteine) exceeded goals, needing improvements., (© 2022 the author(s), published by De Gruyter, Berlin/Boston.)

Background: Serum ferritin is considered a suitable biomarker of iron-related disorders. However, data about the comparability of results among commercial measuring systems (MSs) are contradictory. We performed an intercomparison study aimed at verifying the current interassay variability and its impact on clinical application of the test. Obtaining this information is vital because manufacturers continue to claim calibration alignment to different WHO preparations, which are not related to each other in terms of traceability., Methods: Four widely used MSs were evaluated. The interassay agreement was verified using 39 human serum pools. The recovery of WHO International Standard (IS) 94/572 (the only reference material available at the time of the study) was evaluated, after assessing the material commutability. Finally, an approach for harmonizing ferritin results was proposed., Results: Highly significant differences (P < 0.00001) among ferritin concentrations assayed by different MSs were detected and the interassay CV (median 22.9%; interquartile range 21.8-25.5) overlapped the desirable intermethod bias (24.6%). IS 94/572 was commutable for use only with Access and Centaur, with Access being the only MS correctly recovering its assigned value. Accordingly, we used regression data against Access to recalibrate MSs, indirectly aligning them to IS 94/572, with a substantial improvement in degree of harmonization and traceability to higher-order reference., Conclusions: The harmonization among evaluated ferritin MSs is far from optimal, with the implementation of traceability to different WHO ISs being a factor of confusion. A recalibration approach, however, would permit measurement harmonization, allowing the use of common decision thresholds., Competing Interests: Authors’ Disclosures or Potential Conflicts of Interest: Upon manuscript submission, all authors completed the author disclosure form. Disclosures and/or potential conflicts of interest:, (© American Association for Clinical Chemistry 2022. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.)

Appropriateness in Laboratory Medicine has been the object of various types of interventions. From published experiences, it is now clear that to effectively manage the laboratory test demand it is recommended to activate evidence-based preventative strategies stopping inappropriate requests before they can reach the laboratory. To guarantee appropriate laboratory test utilization, healthcare institutions should implement and optimize a computerized provider order entry (CPOE), exploiting the potential of electronic requesting as "enabling factor" for reinforcing appropriateness and sustaining its effects over time. In our academic institution, over the last 15 years, our medical laboratory has enforced various interventions to improve test appropriateness, all directly or indirectly based on CPOE use. The following types of intervention were implemented: (1) applying specific recommendations supported by monitoring by CPOE as well as a continuous consultation with clinicians (tumour markers); (2) removing outdated tests and avoiding redundant duplications (cardiac markers, pancreatic enzymes); (3) order restraints to selected wards and gating policy (procalcitonin, B-type natriuretic peptide, homocysteine); (4) reflex testing (bilirubin fractions, free prostate-specific antigen, aminotransferases, magnesium in hypocalcemia); and (5) minimum retesting interval (D-Dimer, vitamin B 12 , C-reactive protein, γ-glutamyltranspeptidase). In this paper, we reviewed these interventions and summarized their outcomes primarily related to the changes in total test volumes and cost savings, without neglecting patient safety. Our experience confirmed that laboratory professionals have an irreplaceable role as "stewards" in designing, implementing, evaluating, and maintaining interventions focused to improving test appropriateness., (© 2022 the author(s), published by De Gruyter, Berlin/Boston.)

In medical laboratories, the appropriateness challenge directly revolves around the laboratory test and its proper selection, data analysis, and result reporting. However, laboratories have also a role in the appropriate management of those phases of total testing process (TTP) that traditionally are not under their direct control. So that, the laboratory obligation to act along the entire TTP is now widely accepted in order to achieve better care management. Because of the large number of variables involved in the overall TTP structure, it is difficult to monitor appropriateness in real time. However, it is possible to retrospectively reconstruct the body of the clinical process involved in the management of a specific laboratory test to track key passages that may be defective or incomplete in terms of appropriateness. Here we proposed an appropriateness check-list scheme along the TTP chain to be potentially applied to any laboratory test. This scheme consists of a series of questions that healthcare professionals should answer to achieve laboratory test appropriateness. In the system, even a single lacking answer may compromise the integrity of all appropriateness evaluation process as the inability to answer may involve a significant deviation from the optimal trajectory, which compromise the test appropriateness and the quality of subsequent steps. Using two examples of the check-list application, we showed that the proposed instrument may offer an objective help to avoid inappropriate use of laboratory tests in an integrated way involving both laboratory professionals and user clinicians., (© 2022 Walter de Gruyter GmbH, Berlin/Boston.)