Search

Despite the widespread utilization of nano silver composites in the domain of catalytic hydrogenation of aromatic pollutants in wastewater, certain challenges persist, including the excessive consumption of chemical reagents during the preparation process and the difficulty in recycling. In this study, silver ions were reduced in-situ by taking advantage of the adsorptive and reducing capacities of hydroxyls and amino groups on lignin porous microspheres (LPMs) under mild ultrasonic conditions, and lignin porous microspheres loaded with silver nanoparticles (Ag@LPMs) were conveniently prepared. Ag@LPMs had excellent catalytic and cycling performances for p-nitrophenol (4-NP), methylene blue (MB) and methyl orange (MO). The 4-NP could be completely reduced to 4-AP within 155 s under the catalysis of Ag@LPMs, with a pseudo-first-order kinetic constant of 1.28 min -1 . Furthermore, Ag@LPMs could still complete the catalytic reduction of 4-NP within 10 min after five cycles. Ag@LPMs with the particle size ranging from 100 to 200 μm conferred ease of recycling, and the porous structure effectively resolved the issue of sluggish mass transfer encountered during the catalytic process. At the same time, the binding force of nano silver and LPMs obtained by ultrasonic was stronger than that of heating, so the materials prepared by ultrasonic had better cycling performance. Silver ions concentration and pH value in the preparation process affected the catalytic performance of Ag@LPMs, 50 mmol/L Ag + and pH value of 7 turned out to be the optimization conditions., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have influenced the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Improving the thermal storage stability of nanosuspension concentrate (SC) prepared from low-melting-point pesticide is a recognized problem. In this work, using pyraclostrobin as the raw material, 25 wt% of pyraclostrobin nano-SC was prepared through a water-based grinding method, and the optimal grinding conditions were obtained as follows: a grinding time of 23 h, D-3911 as dispersant and a dispersant dosage of 12 wt%. The pyraclostrobin nano-SC D 90 size prepared based on this best formula was 216 nm. Adding glycerin could improve the stability of nano-SC at room temperature, but its thermal storage stability was still poor. For this problem, sodium lignosulfonate and cetyltrimethylammonium bromide (NaLS/CTAB) colloidal spheres were prepared through electrostatic and hydrophobic self-assembly and characterized. The delamination and precipitation of nano-SC can be significantly improved by adding an appropriate amount of colloidal spheres, and the nano-SC D 90 size decreased from 2726 to 1023 nm after 7 days of thermal storage. Farmland experiments indicated the control efficiency of pyraclostrobin nano-SC against flowering cabbage downy mildew disease was about 30% higher than that of SC. Especially after adding the wetting agent, the effect of nano-SC could be comparable to that of commercial Kairun (currently the best pyraclostrobin formulation in the world).

Achieving superior photomineralization of pollutants relies on a rational design of a dual S-scheme with a robust internal electric field (IEF). In this study, to tackle the low mineralization rate in type-II In 2 O 3 /In 2 S 3 (IO/IS) systems, an organic-inorganic dual S-scheme In 2 O 3 /PDI/In 2 S 3 (IO/PDI/IS) nanostructured photocatalyst is synthesized via a method combining solvent-induced self-assembly and electrostatic forces. Due to the unique energy band position and strong IEF, the photoinduced defect-transit dual S-scheme IO/PDI/IS facilitates the degradation of lignin and antibiotics. Notably, a promising mineralization rate of 80.9% for sodium lignosulfonate (SL) is achieved. The charge transport pathway of IO/PDI/IS are further validated through the analysis of in situ X-ray photoelectron spectroscopy (in situ XPS), density functional theory calculations, and radical trapping experiments. In-depth, two possible pathways for the photocatalytic degradation of lignin are proposed based on the intermediates monitored by liquid chromatography-mass spectrometry (LC-MS). This study presents a new strategy for the design of organic-inorganic dual S-scheme photocatalysts with a robust IEF for pollutant degradation., (© 2023 Wiley-VCH GmbH.)

Thought-out utilization of entire lignocellulose is of great importance to achieving sustainable and cost-effective biorefineries. However, there is a trade-off between efficient carbohydrate utilization and lignin-to-chemical conversion yield. Here, we fractionate corn stover into a carbohydrate fraction with high enzymatic digestibility and reactive lignin with satisfactory catalytic depolymerization activity using a mild high-solid process with aqueous diethylamine (DEA). During the fractionation, in situ amination of lignin achieves extensive delignification, effective lignin stabilization, and dramatically reduced nonproductive adsorption of cellulase on the substrate. Furthermore, by designing a tandem fractionation-hydrogenolysis strategy, the dissolved lignin is depolymerized and aminated simultaneously to co-produce monophenolics and pyridine bases. The process represents the viable scheme of transforming real lignin into pyridine bases in high yield, resulting from the reactions between cleaved lignin side chains and amines. This work opens a promising approach to the efficient valorization of lignocellulose., (© 2024. The Author(s).)

In this study, a porous polyamine lignin microsphere (PPALM) was prepared through the inverse suspension polymerization combined with freeze-drying, during which sodium lignosulfonate and polyetheramine (PEA) were crosslinked with epichlorohydrin (ECH) as the cross-linker. By adjusting the amount of ECH and PEA, the optimized PPALM exhibited suitable crosslinking degree, ensuring a balance of framework flexibility and rigidity, thereby facilitating the formation of abundant and fine pores. PPALM demonstrated good mechanical properties comparable to commercial sulfonated polystyrene cationic resin, with a porosity of 61.12 % and an average pore size of 283.51 nm. The saturation adsorption capacity of PPALM for Pb 2+ was measured to be 156.82 mg/g, and it remained above 120 mg/g after five cycles of regeneration. Particularly, the concentration of 50 mg/L Pb 2+ solution could be reduced to 0.98 mg/L after flowing through the PPALM packed bed, indicating the great potential of PPALM for application in wastewater treatment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have influenced the work reported in this paper., (Copyright © 2023. Published by Elsevier B.V.)

In situ integration of enzymes with covalent organic frameworks (COFs) to form hybrid biocatalysts is both significant and challenging. In this study, we present an innovative strategy employing deep eutectic solvents (DESs) to synergistically synthesize COFs and shield cytochrome c (Cyt c). By utilizing DESs as reaction solvents in combination with water, we successfully achieved rapid and in situ encapsulation of Cyt c within COFs (specifically COF-TAPT-TFB) under ambient conditions. The resulting Cyt c@COF-TAPT-TFB composite demonstrates a remarkable preservation of enzymatic activity. This encapsulation strategy also imparts exceptional resistance to organic solvents and exhibits impressive recycling stability. Additionally, the enhanced catalytic efficiency of Cyt c@COF-TAPT-TFB in a photoenzymatic cascade reaction is also showcased.

Quantitatively understanding of interaction mechanism between lignin and cellulases is essential for the efficient improvement of lignocellulose enzymatic hydrolysis. However, the individual contribution of multiple forces between lignin and cellulases to the non-productive adsorption of enzymes still remains deeply ambiguous, especially in situations of near enzymatic hydrolysis temperatures. Herein, atomic force microscopy (AFM) and computational simulations were utilized to quantitatively analyze the intermolecular forces between lignin and enzyme at 25 °C and 40 °C. Our results unveiled that an increase in temperature obviously improved adsorption capacity and total intermolecular forces between lignin and cellulases. This positive relationship mainly comes from the increase in the decay length of hydrophobic forces for lignin-cellulases when temperature increases. Different from the hydrophobic interaction which provides long-range part of attractions, van der Waals forces dominate the intermolecular force only at approaches < 2 nm. On the other hand, electrostatic forces exhibited repulsive effects, and its intensity and distance were limited due to the low surface potential of cellulases. Short-range forces including hydrogen bonding (main) and π-π stacking (minor) stabilize the non-specific binding of enzymes to lignin, but increasing temperature reduces hydrogen bond number. Therefore, the relative contribution of long-range forces increased markedly at higher temperatures, which benefits protein capture and brings lignin and cellulase close together. Finally, the structure-activity relationships between lignin physicochemical properties and its inhibitory effect to enzymes indicated that hydrophobic interactions, hydrogen bonding, and steric effects drive the final adsorption capacity and glucose yields. This work provides quantitative and basic insights into the mechanism of lignin-cellulase interfacial interactions and guides design of saccharification enhancement approaches., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

The introduction of metal vacancies into n-type semiconductors could efficiently construct intimate contact interface p-n homojunctions to accelerate the separation of photogenerated carriers. In this work, a cationic surfactant occupancy method was developed to synthesize an indium-vacancy ( V In )-enriched p-n amorphous/crystal homojunction of indium sulfide (A/C-IS) for sodium lignosulfonate (SL) degradation. The amount of V In in the A/C-IS could be regulated by varying the content of added cetyltrimethylammonium bromide (CTAB). Meanwhile, the steric hindrance of CTAB produced mesopores and macropores, providing transfer channels for SL. The degradation rates of A/C-IS to SL were 8.3 and 20.9 times higher than those of crystalline In 2 S 3 and commercial photocatalyst (P25), respectively. The presence of unsaturated dangling bonds formed by V In reduced the formation energy of superoxide radicals ( • O 2 - ). In addition, the inner electric field between the intimate contact interface p-n A/C-IS promoted the migration of electron-hole pairs. A reasonable degradation pathway of SL by A/C-IS was proposed based on the above mechanism. Moreover, the proposed method could also be applicable for the preparation of p-n homojunctions with metal vacancies from other sulfides.

Photocatalytic water splitting to hydrogen is a sustainable energy conversion method. However, there is a lack of sufficiently accurate measurement methods for an apparent quantum yield (AQY) and a relative hydrogen production rate ( r H 2 ) at the moment. Thus, a more scientific and reliable evaluation method is highly required to allow the quantitative comparison of photocatalytic activity. Herein, a simplified kinetic model of photocatalytic hydrogen evolution was established, the corresponding photocatalytic kinetic equation was deduced, and a more accurate calculation method is proposed for the AQY and the maximum hydrogen production rate v H 2 ,max . At the same time, new physical quantities, absorption coefficient k L and specific activity SA, were proposed to sensitively characterize the catalytic activity. The scientificity and practicality of the proposed model and the physical quantities were systematically verified from the theoretical and experimental levels.

Metal-organic frameworks (MOFs) have become promising accommodation for enzyme immobilization in recent years. However, the microporous nature of MOFs affects the accessibility of large molecules, resulting in a significant decline in biocatalysis efficiency. Herein, a novel strategy is reported to construct macroporous MOFs by metal competitive coordination and oxidation with induced defect structure using a transition metal (Fe 2+ ) as a functional site. The feasibility of in situ encapsulating β-glucosidase (β-G) within the developed macroporous MOFs endows an enzyme complex (β-G@MOF-Fe) with remarkably enhanced synergistic catalysis ability. The 24 h hydrolysis rate of β-G@MOF-Fe (with respect to cellobiose) is as high as approximately 99.8%, almost 32.2 times that of free β-G (3.1%). Especially, the macromolecular cellulose conversion rate of β-G@MOF-Fe reached 90% at 64 h, while that of β-G@MOFs (most micropores) was only 50%. This improvement resulting from the expansion of pores (significantly increased at 50-100 nm) can provide enough space for the hosted biomacromolecules and accelerate the diffusion rate of reactants. Furthermore, unexpectedly, the constructed β-G@MOF-Fe showed a superior heat resistance of up to 120 °C, attributing to the new strong coordination bond (Fe 2+ -N) formation through the metal competitive coordination. Therefore, this study offers new insights to solve the problem of the high-temperature macromolecular substrate encountered in the actual reaction.

Recycling cellulase can reduce the cost of lignocellulosic enzymatic hydrolysis. Here, a lignin-grafted sulfobetaine (LSB) was first synthesized by grafting sulfobetaine (SB) on enzymatic hydrolysis lignin (EHL). LSB had a sensitive response of pH and temperature. LSB dissolved under the conditions of lignocellulosic enzymatic hydrolysis (pH 5.0, 50 °C). After hydrolysis, LSB co-precipitated with cellulase when lowering pH of the hydrolysate to 4.0 and cooling to 25 °C. When 3.0 g/L LSB-100 was added to the hydrolysis system of corncob residue (CCR), 70 % of amount of cellulase was saved. LSB had a remarkable response and stronger cellulase recovery capacity. This was attributed that carboxylate radical in LSB was protonated, and positive and negative ions of SB associated to form salt at 25 °C. This work provides a new idea for reducing the cost for preparing fermentable sugars from lignocellulose, and increasing the added value of EHL., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Due to the poor enzyme thermal stability, the efficient conversion of high crystallinity cellulose into glucose in aqueous phase over 50 °C is challenging. Herein, an enzyme-induced MOFs encapsulation of β-glucosidase (β-G) strategy was proposed for the first time. By using various methods, including SEM, XRD, XPS, NMR, FTIR and BET, the successful preparation of a porous channel-type flower-like enzyme complex (β-G@MOFs) was confirmed. The prepared enzyme complex (β-G@MOFs) materials showed improved thermal stability (from 50 °C to 100 °C in the aqueous phase) and excellent resistance to ionic liquids (the reaction temperature was as high as 110 °C) compared to the free enzyme (β-G). Not only the catalytic hydrolysis of cellulose by single enzyme (β-G) in ionic liquid was realized, but also the high-temperature continuous reaction performance of the enzyme was significantly improved. Benefiting from the significantly improved heat resistance, the β-G@MOFs exhibited 32.1 times and 34.2 times higher enzymatic hydrolysis rate compared to β-G for cellobiose and cellulose substrates, respectively. Besides, the catalytic activity of β-G@MOFs was retained up to 86 % after five cycles at 110 °C. This was remarkable because the fixation of the enzyme by the MOFs ensured that the folded structure of the enzyme would not expand at high temperatures, allowing the native conformation of the encapsulated protein well-maintained. Furthermore, we believe that this structural stability was caused by the confinement of flower-like porous MOFs., (© 2022 Wiley-VCH GmbH.)

The photoreforming of lignocellulose is a novel method to produce clean and sustainable H 2 energy. However, the catalytic systems usually show low activity under ultraviolet light; thus, this reaction is very limited at present. Visible light-responsive metal-free two-dimensional graphite-phased carbon nitride (g-C 3 N 4 ) is a good candidate for photocatalytic hydrogen production, but its activity is hindered by a bulky architecture. Although reported layered g-C 3 N 4 modified with active functional groups prepared by the chemical exfoliation enhances the photocatalytic activity, it lost the intrinsic structure and thus is not conducive to understand the structure-activity relationship. Herein, we report an intrinsic monolayer g-C 3 N 4 (∼0.32 nm thickness) prepared by nitrogen-protected ball milling in water, which shows good performance of photoreforming lignocellulose to H 2 driven by visible light. The exciton binding energy of g-C 3 N 4 was estimated from the temperature-dependent photoluminescence spectra, which is a key factor for subsequent charge separation and energy transfer. It is found that monolayer g-C 3 N 4 with smaller exciton binding energy increases the free exciton concentrations and promotes the separation efficiency of charge carriers, thereby effectively improving its performance of photocatalytic reforming of lignocellulose, even the virgin lignocellulose and waste lignocellulose. This result could lead to more active catalysts to photoreform the raw biomass, making it possible to provide clean energy directly from locally unused biomass.

Green synthesis of silver nanoparticles (AgNPs) has received increasing attention. In this study, AgNPs were prepared through in-situ reduction by aminated alkaline lignin (AAL). Compared with alkaline lignin (AL), AAL exhibited stronger reduction capacity (increased by 36%) due to the introduced amine groups and better water solubility. Moreover, the coordination effect of amine groups on AAL improved the binding force between lignin and AgNPs. The content of AgNPs in AgNPs/AAL composite were 2.4 times higher than that in AgNPs/AL, such content could be further increased through increasing the reduction pH or prolonging the heating time. The results of XPS, XRD and TEM showed that the AgNPs were spherical and monodisperse with an average particle size about 17 nm. Additionally, the size of AgNPs was affected by the amination degree of lignin. AgNPs/AAL exhibited good catalytic performance for the reduction of 4-nitrophenol to 4-aminophenol, and this compound could be easily recovered and reused for at least eight cycles., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Inc. All rights reserved.)

Most additives that capable of enhancing enzymatic hydrolysis of lignocellulose are petroleum-based, which are not easy to recycle with poor biodegradability. In this work, highly recyclable and biodegradable sodium caseinate (SC) was used to enhance lignocellulosic hydrolysis with improved cellulase recyclability. When the pH decreased from 5.5 to 4.8, more than 96% SC could be precipitated from the solution and recovered. Adding SC increased enzymatic digestibility of dilute acid pretreated eucalyptus (Eu-DA) from 39.5% to 78.2% under Eu-DA loading of 10 wt% and pH = 5.5, and increase cellulase content in 72 h hydrolysate from only 15.2% of the original to 60.0%, which facilitated the recovery of cellulases through re-adsorption by fresh substrates. With multiple cycles of re-adsorption, application of SC not only increased the sugar yield of Eu-DA by 95.5%, but also reduced cellulase loading by 40%., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

In the formulation of pesticide Suspension Concentrate (SC), some photosensitive pesticides are easily decomposed in the preparation. In this study, a hindered amine modified lignosulfonate (SL-Temp) with anti-photolysis function was synthesized using 4-amino-2,2,6,6-tetramethylpiperidine (Temp) and Sodium Lignosulfonate (SL) to solve this problem. The obtained SL-Temp was used as a dispersant to prepare 5% SC of avermectin, which shows good physical stability. The decomposition rate of the avermectin in SC after accelerating hot storage is 0%, which is much lower than 6.1% when SL was used as the dispersant. After being exposed to UV irradiation for 60 hours, the highest retention rate of avermectin is 87.1% when SL-Temp was used as the dispersant, which is much higher than 73.6% when SL was used as the dispersant, and also higher than 76.3% when a small molecule antioxidant (BHT) was added to the formulation. QCM-D studies revealed that the SL-Temp adsorption layer on avermectin particles can compete to absorb partial ultraviolet rays, hinder the penetration of ultraviolet light, and scavenge the free radicals produced by photooxidation, so as to protect avermectin from degradation., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

The isoelectric point (pI) of lignin-based surfactant is an important factor in the enhancement on the enzymatic hydrolysis of lignocellulose. In this work, lignin carboxylate (LC) and quaternary ammonium lignin carboxylates (LCQ-x, x%: the mass ratio of quaternizing agent to enzymatic hydrolysis lignin) with different isoelectric points were synthesized. LC or LCQ-x with pI significantly lower or higher than 4.8 reduced the non-productive adsorption of cellulase on lignin, but for the significant inhibitory effect on cellulase activity, their enhancements on the enzymatic hydrolysis of lignocellulose were not remarkable. However, LCQ-x with pI around 4.8 preserved the cellulase activity, and significantly reduced the non-productive adsorption of cellulase, therefore remarkably enhanced the enzymatic hydrolysis. 2 g/L LC, LCQ-40 (pI = 5.0) and LCQ-100 (pI = 9.2) increased the enzymatic digestibility of pretreated eucalyptus from 35.2% to 53.4%, 95.3% and 60.4% respectively. In addition, for the excellent pH-response performance, LCQ could be efficiently recovered after enzymatic saccharification., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

A lignin amphoteric surfactant and betaine could enhance the enzymatic hydrolysis of lignocellulose and recover cellulase. The effects of lignosulfonate quaternary ammonium salt (SLQA) and dodecyl dimethyl betaine (BS12) on enzymatic hydrolysis digestibility, ethanol yield, yeast cell viability, and other properties of high-solid enzymatic hydrolysis and fermentation of a corncob residue were studied in this research. The results suggested that SLQA and 1 g/L BS12 effectively improved the ethanol yield through enhancing enzymatic hydrolysis. SLQA had no significant effect on the yeast cell membrane and glucose fermentation. However, 5 g/L BS12 reduced the ethanol yield as a result of the fact that 5 g/L BS12 damaged the yeast cell membrane and inhibited the conversion of glucose to ethanol. Our research also suggested that 1 g/L BS12 enhanced the ethanol yield of corncob residue fermentation, which was attributed to the fact that lignin in the corncob adsorbed BS12 and decreased its concentration in solution to a safe level for the yeast.

Effects of nonionic surfactants on enzymatic hydrolysis of Avicel at different agitation rates and solid loadings and the mechanism were studied. Nonionic surfactants couldn't improve the enzymatic hydrolysis efficiency at 0 and 100rpm but could enhance the enzymatic hydrolysis significantly at high agitation rate (200 and 250rpm). Cellulase was easily deactivated at high agitation rate and the addition of nonionic surfactants can protect against the shear-induced deactivation, especially when the cellulase concentration was low. When 25mg protein/L of cellulase solution was incubated at 200rpm for 72h, the enzyme activity increased from 36.0% to 89.5% by adding PEG4600. Moreover nonionic surfactants can compete with enzyme in air-liquid interface and reduce the amount of enzyme exposed in the air-liquid interface. The mechanism was proposed that nonionic surfactants could enhance the enzymatic hydrolysis of Avicel by reducing the cellulase deactivation caused by shear force and air-liquid interface., (Copyright © 2017. Published by Elsevier Ltd.)

Lignin is a vastly underutilized biomass resource. The preparation of water-dispersed lignin nanoparticles is an effective way to realize the high-value utilization of lignin. However, the currently reported preparation methods of lignin nanoparticles still have some drawbacks, such as the requirement for toxic organic solvent or chemical modification, complicated operation process, and poor dispersibility. Here, lignin/sodium dodecyl sulfate (SDS) composite nanoparticles (LSNPs) with outstanding water dispersibility and a size range of 70-200 nm were facilely prepared via acidifying the mixed basic solution of alkaline lignin and SDS. No harsh chemical was needed. The formation mechanism was systematically studied. Results indicated that the LSNPs were obtained by acid precipitation of the mixed micelles formed by the self-assembly of lignin and SDS. In addition, on the basis of the LSNP-stabilized Pickering emulsions, lignin/polyurea composite microcapsules combining the excellent chemical stability of a synthetic polyurea shell with the fantastic antiphotolysis and antioxidant properties of lignin were successfully prepared.

Some zwitterionic surfactants exhibit upper critical solution temperature (UCST) in aqueous solutions. For the zwitterionic surfactant solution mixed with cellulase, when its temperature is below UCST, the cellulase can be recovered by coprecipitation with zwitterionic surfactant. In this work, 3-(Hexadecyldimethylammonio) propanesulfonate (SB3-16) was selected to enhance the enzymatic hydrolysis of lignocelluloses and recover the cellulase. After adding 2mmol/L of SB3-16, the enzymatic digestibility of eucalyptus pretreated by dilute acid (Eu-DA) and by sulfite (Eu-SPORL) increased from 27.9% and 35.1% to 72.6% and 89.7%, respectively. The results showed that SB3-16 could reduce the non-productive adsorption of cellulase on hydrophobic interface, while it did not significantly inhibit the activity of cellulase. For the solution contained 1wt% SB3-16 and 200mg protein/L CTec2 cellulase, 55.2% of protein could be recovered by cooling. The filter paper activity of the recovered cellulase was 1.93FPU/mg protein, which was 95.8% of its initial activity., (Copyright © 2017. Published by Elsevier Ltd.)

Polyvinylpyrrolidone (PVP) is an antifouling polymer to resist the adsorption of protein on solid surface. Effects of PVP on the enzymatic hydrolysis of pretreated lignocelluloses and its mechanism were studied. Adding 1g/L of PVP8000, the enzymatic digestibility of eucalyptus pretreated by dilute acid (Eu-DA) was increased from 28.9% to 73.4%, which is stronger than the classic additives, such as PEG, Tween and bovine serum albumin. Compared with PEG4600, the adsorption of PVP8000 on lignin was larger, and the adsorption layer was more stable and hydrophilic. Therefore, PVP8000 reduced 73.1% of the cellulase non-productive adsorption on lignin and enhanced the enzymatic hydrolysis of lignocelluloses greatly., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

A new two-step lignin depolymerization strategy was developed, in which the benzylic alcohols in lignin was methylated under microwave irradiation, followed by a hydrogenolysis for the cleavage of βO4 bond with Pd/C as the catalyst. The results showed that an efficient and selective catalytic methylation of benzylic alcohols was achieved with various lignin model compounds, and the acidic environment promoted the methylation of benzylic alcohol. Methylation of benzylic alcohol increased the βO4 bond cleavage rate by 55.9%, and improved products selectivity. Preliminary study of lignin depolymerization illustrated that methylation pretreatment of benzylic alcohols facilitated lignin depolymerization to produce aromatic monomers and reduced the oxygen content of aromatic monomers., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Two pretreatment methods to overcome recalcitrance of lignocelluloses, sulfite pretreatment (SPORL) and dilute acid (DA), were conducted to pretreat softwood masson pine and hardwood eucalyptus for enzymatic hydrolysis. In the presence of corresponding pre-hydrolysates, adding moderate cetyltrimethylammonium bromide (CTAB) could enhance the enzymatic hydrolysis of the SPORL-pretreated substrates, but had no enhancement for the DA-pretreated substrates. The results showed that sodium lignosulfonate (SL) in pre-hydrolysates and CTAB together had a strong enhancement on the enzymatic hydrolysis of lignocelluloses. The compound of commercial lignosulfonate SXSL and CTAB (SXSL-CTAB) could enhance the substrate enzymatic digestibility (SED) of SPORL-pretreated masson pine from 27.1% to 71.0%, and that of DA-pretreated eucalyptus from 37.6% to 67.9%. The mechanism that CTAB increased the adsorption of SL on lignin to form more effective steric hindrance and reduced the non-productive adsorption of cellulase on lignin by neutralizing the negative charge of SL was proposed., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Sodium lignosulfonate (SXSL) and long-chain fatty alcohols (LFAs) could enhance the enzymatic hydrolysis of xylan, and the compound of SXSL and LFAs have synergies on the enzymatic hydrolysis. SXSL shows a strong enhancement in buffer pH range from 4.0 to 6.0. The enhancement increased with the SXSL dosage and the xylanase loading. The cellulose and lignin in corncob substrate could not only adsorb xylanase nonproductively, but also seriously reduce the accessibility of xylanase on xylan to impede the enzymatic hydrolysis of xylan. Cellulase could break the plant cell wall structure of corncob and make additives work better. The xylose yield of corncob at 72h increased from 59.4% to 73.7% by adding the compound of 5g/L SXSL and 0.01% (v/v) n-decanol, which was higher than that without cellulase and additives by 30.7%. Meanwhile, the glucose yield at 72h of corncob increased from 45.8% to 62.3%., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

The effects of lignosulfonate (SXSL) and long-chain fatty alcohols (LFAs) on the rheology and enzymatic hydrolysis of high-solid corncob slurries were investigated. The application of 2.5% (w/w) SXSL increased the substrate enzymatic digestibility (SED) of high-solid corncob slurries at 72 h from 31.7 to 54.0%, but meanwhile it increased the slurry's yield stress and complex viscosity to make the slurry difficult to stir and pump. The smallest molecular weight (MW) SXSL fraction had the strongest enhancement on SED. The SXSL fraction with large MW had a negative effect on rheology. n-Octanol (C8) and n-decanol (C10) improved the rheological properties of high-solid slurry and are strong enough to counteract the negative effect of SXSL. Furthermore, C8 and C10 clearly enhanced the enzymatic hydrolysis of high-solid corncob slurries with and without SXSL. A mechanism was proposed to explain the observed negative effect of SXSL and the positive effect of LFAs on the rheological properties.

Different lignosulfonate (LS) samples were prepared via a three-step method and were characterized by FT-IR, UV, GPC and functional groups measurement. FT-IR and UV spectra confirmed the prepared samples had typical characteristics of lignin materials. GPC and functional groups measurement results indicated the samples had different molecular mass (M(w)), but same quantities of sulfonic groups (S). The influence of M(w) of LS on the resulting surface charges of dimethomorph particles via adsorption was further investigated. The results indicated that the adsorption isotherms of LS on dimethomorph surfaces belonged to L-type and the adsorption capacity (q(m)) increased with increasing M(w). However, the non-linear correlation between zeta potentials with the products of S and adsorption amount (SA) indicated SA did not positively improve the surface charges expectedly. Based on the analysis, an adsorption confirmation was proposed allowing prediction of the relation between M(w) and surface charge efficiency of LS for solid particles., (Copyright © 2012 Elsevier B.V. All rights reserved.)

Lignosulfonate is an anionic surfactant from pulp processing industries. Alcohols are often used as cosurfactants in the application of surfactant. The improvement of straight-chain alcohols with different alkyl chain lengths as cosurfactant on the physicochemical properties of calcium lignosulfonate (CL) aqueous solution has been investigated. The results indicate that small amounts of straight-chain alcohols with longer alkyl chains are helpful in improving the surface activity of CL, especially when the number of carbon atoms in alcohols is 10 or larger. The adsorption amount of CL solutions with additives of longer chain alcohols on TiO(2) particles increases greatly, and the zeta potential of TiO(2) particles adsorbing CL rises significantly. It can be concluded that there is a cooperative effect of the longer chain alcohols on lignosulfonate to form a tighter adsorption layer at the interface. The steric hindrance increases with the increasing amount of adsorption, and the static repulsive force increases with the increasing zeta potential. Therefore, the effect of CL on the stability of the TiO(2) suspension is enhanced dramatically by addition of longer chain alcohols. This understanding can lead to further development in expanding the functionalities of the lignosulfonate through manipulation of the adsorption capacity of CL on solid particles and enhance the dispersive ability of CL on solid suspensions by adding longer straight-chain alcohols.