Search

Although the paper industry processes polymeric materials and discharges large amounts of wastewater, no research on microplastics in the wastewater from paper mills has been published to date. This study is the first to investigate this issue. The wastewater treatment plants of twelve representatively selected German paper mills were investigated using an analysis protocol based on µ-Raman spectroscopy. The results show that treated process water from surface waters is negligible as a source of microplastics (MPs) ≥ 20 µm. The microplastics concentrations in untreated wastewater range from 10 6 to 10 8 (MPs ≥ 20 µm)/m 3 . Sources of microplastics in wastewater include recovered paper, functional polymers, and coating colors, among others. The most frequently detected polymers are polyethylene and polystyrene. In four cases, moving bed biofilm reactors were identified as a source of microplastics. The microplastics concentration in treated wastewater ranges from 10 2 to 10 4 (MPs ≥ 20 µm)/m 3 . Hence, the removal rate of the wastewater treatment plants exceeds 99 %. Mechanical treatment and the activated sludge process have the highest removal rates of all treatment stages. The loads emitted into surface waters range from 10 6 to 10 8 (MPs ≥ 20 µm)/h, comparable to municipal wastewater treatment plants with a population equivalent of over 10,000 inhabitants. Compared with other wastewater-related emissions (the total emissions of municipal wastewater treatment plants, or combined sewer overflow), the contribution of paper mills to microplastics in the aquatic environment is low. The results of the removal efficiency can be transferred to other branches of industry and municipal wastewater treatment plants., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Felix Steinfeld reports financial support was provided by German Federal Ministry of Economic Affairs and Climate Action. Antje Kersten reports financial support was provided by German Federal Ministry of Economic Affairs and Climate Action. Samuel Schabel reports financial support was provided by German Federal Ministry of Economic Affairs and Climate Action. Jutta Kerpen reports financial support was provided by German Federal Ministry of Economic Affairs and Climate Action. Felix Steinfeld reports writing assistance was provided by AngloDoc. Felix Steinfeld reports administrative support was provided by Kuratorium für Forschung und Technik in der Papier- und Zellstoffindustrie im VDP e.V. Antje Kersten reports administrative support was provided by Kuratorium für Forschung und Technik in der Papier- und Zellstoffindustrie im VDP e.V. Samuel Schabel reports administrative support was provided by Kuratorium für Forschung und Technik in der Papier- und Zellstoffindustrie im VDP e.V. Jutta Kerpen reports administrative support was provided by Kuratorium für Forschung und Technik in der Papier- und Zellstoffindustrie im VDP e.V. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

Purpose: Excessive paper dust during paper production may harm the workers' respiratory health. We wanted to assess the inhalable paper dust levels and its determinants among paper industry workers., Methods: A study was conducted in Ethiopia to assess the level of personal inhalable paper dust exposure among four paper mills. A total of 150 samples were collected using the IOM sampler attached to Side Kick Casella pumps at a flow rate of 2 L/min. The samples were analyzed in Nemko Norlab, Norway. Linear mixed-effect models were applied to identify determinants of inhalable paper dust., Results: The geometric mean of personal inhalable paper dust was 3.3 mg/m 3 with 80% of the measurements exceeding the Swedish occupational exposure limit (OEL) of 2 mg/m 3 . The linear mixed-effects model showed that the level of dust was 28% higher when using high-speed than when using low-speed rewinding machines, while paper mills with an average of more than four machines per job group had 22% higher exposure than paper mills with a lower number of machines. Furthermore, working in packing and preparation was associated with higher dust exposure than in other areas., Conclusions: The dust exposure levels were above the Swedish OEL for 80% of the samples. This indicates that preventive measures should be established in the industry. The exposure model identified high-speed rewinding machines, a high number of machines, and work in preparation and packing as associated with high levels of paper dust exposure., Competing Interests: Declarations Ethical approval Ethical clearance was obtained from the Institutional Review Board of the College of Health Science Addis Ababa University number 079/22/SPH and from the Regional Committee for Research Ethics South East Norway, number 2022/521268. After the purpose and the importance of their participation were explained informed consent was taken from each study participant. Privacy and confidentiality of information given by each participant were kept properly and personal identifiers were removed. Conflict of interest The authors declare that they have no competing interests., (© 2024. The Author(s).)

China's pulp and paper industry (CPPI) has been always the main carbon emission source in recent years. However, the analysis on influencing factors of carbon emissions from this industry is insufficient. To address the issue, the CO 2 emissions from CPPI are estimated in the period of 2005-2019, the driving factors of CO 2 emissions are investigated by the logarithmic mean Divisia index (LMDI) method, the decoupling state of economic growth and CO 2 emissions is determined by Tapio decoupling model, and finally, future CO 2 emissions are predicted under four scenarios by the STIRPAT model to explore the potential of carbon peaking. The results show that CPPI exhibits a rapid increase and a fluctuating downward trend in CO 2 emissions during the period of 2005-2013 and 2014-2019, respectively. The main promoting and inhibiting factors to the increase of CO 2 emission are per capita industrial output value and energy intensity, respectively. There are five decoupling states of CO 2 emissions and economic growth during the study period, and the CO 2 emissions exhibit a weak decoupling state with the industrial output value growth in most years of the study period. It is very difficult to realize the carbon peaking goal by 2030 under the baseline and fast development scenarios. Therefore, efficient low carbon and strong low-carbon development policies are necessary and urgent for the realization of carbon peaking goal and the sustainable development of CPPI., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

The paper industry is closely related to forestry resources, which constitute an essential part of achieving sustainable development. Green credit can provide financial support to assist the paper industry in achieving carbon neutrality. To develop a method for performing green credit risk assessments in the paper industry, first, an initial index system was established on the basis of two dimensions: financial risk and socio-environmental risk. Then, the KMV model was applied to measure credit risk. The combined results of this model, along with the environmental penalties of an enterprise, formed the basis for the classification of green credit risk. Third, the Gini index was used to filter out, one by one, the indexes with the least influence among the factors, and then random forest iterations were performed until the prediction accuracy reached the optimum, thus establishing a green credit risk prediction model for the paper industry. The results show that the accuracy of the sample classification reached 93.75%, and the accuracy of the sample classification for high-risk enterprises reached 100%. The established index system offers good guidance for the assessment of green credit risk in the paper industry, in which the interest coverage ratio, current ratio, asset-liability ratio, and green emissions are the main factors affecting green credit risk.

We present a rotational terahertz imaging system for inline nondestructive testing (NDT) of press sleeves for the paper industry during fabrication. Press sleeves often consist of polyurethane (PU) which is deposited by rotational molding on metal barrels and its outer surface mechanically processed in several milling steps afterwards. Due to a stabilizing polyester fiber mesh inlay, small defects can form on the sleeve's backside already during the initial molding, however, they cannot be visually inspected until the whole production processes is completed. We have developed a fast-scanning frequenc-modulated continuous wave (FMCW) terahertz imaging system, which can be integrated into the manufacturing process to yield high resolution images of the press sleeves and therefore can help to visualize hidden structural defects at an early stage of fabrication. This can save valuable time and resources during the production process. Our terahertz system can record images at 0.3 and 0.5 THz and we achieve data acquisition rates of at least 20 kHz, exploiting the fast rotational speed of the barrels during production to yield sub-millimeter image resolution. The potential of automated defect recognition by a simple machine learning approach for anomaly detection is also demonstrated and discussed.

The world paper industry produces a great amount of industrial solid waste that undergoes a treatment process that can be either primary, secondary, or tertiary, in order to adapt the waste for correct disposal. The paper manufacturing industries search for the best way to dispose of their wastes, generally in landfills, but there are few studies proving the effectiveness of such measure from the environmental, technological and economic points of view. Knowing the characteristics of this waste and understanding the treatment process it is submitted to are fundamental issues to manage it and comply with environmental demands. The purpose of this paper is to perform a chemical, mineralogical, thermal, morphological, physical and environmental characterization of the paper and pulp industry wastes, in order to assess alternatives for their adequate disposal, such as controlled landfills, sanitation, incineration, and sea dumping. It was observed that the material presents physical, chemical, and morphological features that indicate the possibility of reusing it in other production chains, such as the ceramic industry, besides being classified as non-hazardous wastes. Furthermore, disposal in sanitary landfills presents advantages in environmental and technological terms., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Background: The lack of harmonized European legislation on food packaging led the Confederation of European Paper Industries to the proposal of a voluntary Industry Guideline for the compliance of paper and board materials for food contact applications. In the present work, a previously established method for the simultaneous determination of contaminants commonly found in recycled paperboard was improved and its applicability as a quality control tool in the paper industry was also assessed. The method involves a sample pre-treatment followed by gas chromatography/mass spectrometry (GC/MS) analysis., Results: For analysis, paperboard samples were collected both from three sections of the same reel and from different reels belonging to the same production run. Results highlighted no significant differences in terms of contaminant distribution among samples, which ensured good sampling representativeness. The performance of the method was considerably improved in terms of linearity range, limits of detection and quantification (5- to 2-fold lower) by using a quadrupole GC/MS system instead of an ion trap GC/MS system., Conclusion: The proposed method could offer a key strategy for analysis of benzophenone derivatives, diisopropyl naphthalene and phthalates in recycled paperboard in order to assess compliance of food packaging with the voluntary limits recommended by the Industry Guideline. © 2016 Society of Chemical Industry., (© 2016 Society of Chemical Industry.)

Activated sludge is an artificial ecosystem known to harbor complex microbial communities. Bacterial diversity in activated sludge from pulp and paper industry was studied to bioprospect for laccase, the multicopper oxidase applicable in a large number of industries due to its ability to utilize a wide range of substrates. Bacterial diversity using 454 pyrosequencing and laccase diversity using degenerate primers specific to conserved copper binding domain of laccase like multicopper oxidase (LMCO) genes were investigated. 1231 OTUs out of 11,425 sequence reads for bacterial diversity and 11 OTUs out of 15 reads for LMCO diversity were formed. Phylum Proteobacteria (64.95 %) with genus Thauera (13.65 %) was most abundant followed by phylum Bacteriodetes (11.46 %) that included the dominant genera Paludibacter (1.93 %) and Lacibacter (1.32 %). In case of LMCOs, 40 % sequences showed affiliation with Proteobacteria and 46.6 % with unculturable bacteria, indicating considerable novelty, and 13.3 % with Bacteroidetes. LMCOs belonged to H and J families.

At present, there is no reliable method in use that unequivocally describes paper industry material flows and makes it possible to compare geographical regions with each other. A functioning paper industry Material Flow Account (MFA) that uses uniform terminology and standard definitions for terms and structures is necessary. Many of the presently used general level MFAs, which are called frameworks in this article, stress the importance of input and output flows but do not provide a uniform picture of material recycling. Paper industry is an example of a field in which recycling plays a key role. Additionally, terms related to paper industry recycling, such as collection rate, recycling rate, and utilization rate, are not defined uniformly across regions and time. Thus, reliably comparing material recycling activity between geographical regions or calculating any regional summaries is difficult or even impossible. The objective of this study is to give a partial solution to the problem of not having a reliable method in use that unequivocally describes paper industry material flows. This is done by introducing a new material flow framework for paper industry in which the flow and stage structure supports the use of uniform definitions for terms related to paper recycling. This new framework is termed the Detailed Wheel of Fiber., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

The paper industry is one of the most significant industrial branches that contributes to water pollution. Recent studies regarding the chemical composition of wastewaters from modern paper production sites are sparse, and organic contaminants originating from this source may remain undetected and uncontrolled. Therefore, for this study, non-target screening analyses of wastewaters from five different paper production sites were performed, including an extended analysis of one facility, for the identification of volatile non-polar to semi-polar organic contaminants. The identified contaminants were also traced in the adjacent river. Several specific agents related to paper production, including photoinitiators, ink and thermal paper constituents, were present in most wastewaters and were therefore considered to be characteristic paper industry contaminants. A couple of contaminants identified in this study are being reported for the first time and might be toxic, but have been neglected in previous studies. Bisphenol A and 2,4,7,9-tetramethyl-5-decyne-4,7-diol were found in untreated wastewaters, treated wastewater and in river water. Bisphenol A was present in river water downstream from where the paper industry discharges at a concentration that was reported to affect the reproduction of gastropods. Thus, our findings imply that paper industry discharges pose a risk to the populations of sensitive macroinvertebrates., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Recovery of cellulose fibres from paper mill effluent has been studied using common polysaccharides or biopolymers such as Guar gum, Xanthan gum and Locust bean gum as flocculent. Guar gum is commonly used in sizing paper and routinely used in paper making. The results have been compared with the performance of alum, which is a common coagulant and a key ingredient of the paper industry. Guar gum recovered about 3.86mg/L of fibre and was most effective among the biopolymers. Settling velocity distribution curves demonstrated that Guar gum was able to settle the fibres faster than the other biopolymers; however, alum displayed the highest particle removal rate than all the biopolymers at any of the settling velocities. Alum, Guar gum, Xanthan gum and Locust bean gum removed 97.46%, 94.68%, 92.39% and 92.46% turbidity of raw effluent at a settling velocity of 0.5cm/min, respectively. The conditions for obtaining the lowest sludge volume index such as pH, dose and mixing speed were optimised for guar gum which was the most effective among the biopolymers. Response surface methodology was used to design all experiments, and an optimum operational setting was proposed. The test results indicate similar performance of alum and Guar gum in terms of floc settling velocities and sludge volume index. Since Guar gum is a plant derived natural substance, it is environmentally benign and offers a green treatment option to the paper mills for pulp recycling., (Copyright © 2014. Published by Elsevier B.V.)

The paper industry has a relatively high degree of reliance on suppliers when compared to other industries. Exploring the role of the paper industry in terms of consumption of intermediate inputs from other industries may help to understand how the production of paper does not only generate waste by itself but also affects the amount of waste generated by other industries. The product Life Cycle Assessment (LCA) is a useful analytical tool to examine and assess environmental impacts over the entire life cycle of a product "from cradle to grave" but it is costly and time intensive. In contrast, Economic Input Output Life Cycle Assessment Models (IO-LCA) that combine LCA with Input-Output analysis (IO) are more accurate and less expensive, as they employ publicly available data. This paper represents one of the first Spanish studies aimed at estimating the waste generated in the production of paper by applying IO-LCA. One of the major benefits is the derivation of the contribution of direct and indirect suppliers to the paper industry. The results obtained show that there was no direct relationship between the impact on output and the impact on waste generation exerted by the paper industry. The major contributors to waste generation were the mining industry and the forestry industry., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

Anaerobic digestion of organic waste generated by households, businesses, agriculture, and industry is an important approach as method of waste treatment - especially with regard to its potential as an alternative energy source and its cost-effectiveness. Separate collection of biowaste from households or vegetal waste from public green spaces is already established in some EU-27 countries. The material recovery in composting plants is common for biowaste and vegetal waste. Brewery waste fractions generated by beer production are often used for animal feeding after a suitable preparation. Waste streams from paper industry generated by pulp and paper production such as black liquor or paper sludge are often highly contaminated with toxic substances. Recovery of chemicals and the use in thermal processes like incineration, pyrolysis, and gasification are typical utilization paths. The current utilization of organic waste from households and institutions (without agricultural waste) was investigated for EU-27 countries with Germany as an in-depth example. Besides of biowaste little is known about the suitability of waste streams from brewery and paper industry for anaerobic digestion. Therefore, an evaluation of the most important biogas process parameters for different substrates was carried out, in order to calculate the biogas utilization potential of these waste quantities. Furthermore, a calculation of biogas energy potentials was carried out for defined waste fractions which are most suitable for anaerobic digestion. Up to 1% of the primary energy demand can be covered by the calculated total biogas energy potential. By using a "best-practice-scenario" for separately collected biowaste, the coverage of primary energy demand may be increased above 2% for several countries. By using sector-specific waste streams, for example the German paper industry could cover up to 4.7% and the German brewery industry up to 71.2% of its total energy demand., (Copyright © 2013 Elsevier Ltd. All rights reserved.)