Search

Aerosol whipped cream, widely used in various foods, relies on solid fats rich in saturated fatty acids (SFAs) for stable gas entrapment. In this study, the potential of oleogels as a healthy fat substitute for formulating aerosol whipped cream was studied. The analysis focused on the effects of different types (beeswax [BW], rice bran wax [RW], and carnauba wax) and the quantities of wax on the properties of the aerosol whipped creams. The BW-oleogel-based aerosol whipped cream exhibited the highest foam ability and foam stability. The superior physical properties of the bees wax-oleogel were attributed to the higher overrun and height stability of its whipped cream compared to RW and carnauba oleogels. The 6% BW-whipped cream showed significantly higher overrun and cream stability. The 6% BW oleogel whipped cream contained 4.4 times lower SFAs than the dairy milk fat whipped cream. This study represents the first exploration into the feasibility of formulating oleogel-based aerosol whipped cream using liquid vegetable oil., (© 2024 Institute of Food Technologists.)

In recent years, people have become interested in consuming low-fat foods as this reduces the risk of obesity and cardiovascular disease. For this reason, this study optimized the incorporation of passion fruit epicarp (PFE) as a partial fat substitute in dairy ice cream. For this purpose, a central composite rotational design 2 2 was performed and 5 response variables were optimized, of which 4 variables were maximized (percentage overrun, hardness, adhesiveness, and color coordinates L *, a *, b *), while the melting rate was minimized as a function of two factors (% PFE and % fat). The stability of three types of ice cream was then evaluated: experimental ice cream (3% milk fat and 0.97% PFE), commercial ice cream (4% milk fat and 2% vegetable fat) and control ice cream (3% milk fat without PFE added), according to their physicochemical and sensory properties during 57 days of storage (-22 °C, 85% relative humidity). The results showed that it was possible to reduce the milk fat by up to 25% by adding PFE (0.97%), which significantly reduced the melting rate and resulted in higher hardness (N), adhesiveness and increased yellowness compared to the commercial samples. The optical microscopy analysis also showed that PFE keeps the air bubbles immobile due to the increased viscosity in the serum phase during the 57-day storage., Competing Interests: DECLARATION OF CONFLICTING INTERESTSThe author(s) declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

This study investigates the potential use of peanut oil bodies as a fat replacer in ice cream. We explored the effects of different treatments, fresh (FOB), heated (HOB), and roasted (ROB) peanut oil bodies on ice cream preparation. Heat treatment altered the intrinsic protein profile on the oil bodies' surface, subsequently influencing the ice cream's properties. Notably, heat treatment increases the oil bodies' size and the absolute value of ζ-potential. The rheological analysis provided information about void volumes, indicating easier air incorporation during whipping for ROB (72 to 300 nm) than FOB (107 to 55 nm). ROB ice cream displays a high overrun and a lower melting rate compared to FOB ice cream. Moreover, thermal treatment reduces the beany flavors, n-hexanal, and 2-pentenylfuran. Overall, this study reveals peanut oil bodies as a promising platform for rational design of fat-substituted plant-based ice creams., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

This study investigated the individual and combined effects of ĸ-Casein (ĸ-CN; AA, AB, BB), β-Casein (β-CN; A1A1, A1A2, A2A2) and high and low ratios of glycosylated ĸ-CN to total ĸ-CN, referred to as the glycosylation degree (GD), on bovine cream whipping properties. The genetic variants of individual cows were identified using reversed-phase high-performance liquid chromatography (RP-HPLC) and verified through liquid chromatography-mass spectrometry (LC-MS). A previously discovered relationship between days-in-milk and GD was validated and used to obtain high and low GD milk. Whipped creams were created through the mechanical agitation of fat standardised cream from milk of different ĸ-CN, β-CN, and GD combinations, and whipping properties (the ability to whip, overrun, whipping time and firmness) were evaluated. No significant correlation was measured in whipping properties for cream samples from milks with different ĸ-CN and β-CN genetic variants. However, 80 % of samples exhibiting good whipping properties (i.e., the production of a stiffened peak) were from milk with low GD suggesting a correlation between whipping properties and levels of glycosylation. Moreover, cream separated from skim milk of larger casein micelle size showed superior whipping properties with shorter whipping times (<5 min), and higher firmness and overrun. Milk fat globule (MFG) size, on the other hand, did not affect whipping properties. Results indicate that the GD of κ-CN and casein micelle size may play a role in MFG adsorption at the protein and air interface of air bubbles formed during whipping; hence, they govern the dynamics of fat network formation and influencing whipping properties., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Actual cost fluctuations in construction projects are common in the construction industry, including the Kingdom of Saudi Arabia (KSA). This study's objective is to establish a simulation forecasting model for Saudi projects' cost changes that will be used to anticipate the actual cost spent at the project's end. It also indicates if there are cost overruns or savings by considering ten identified cost-risk impact factors. The study involves a systematic, integrated approach to developing system dynamics (SD) to reflect the ten cost overrun impact factors (COICs) in the KSA construction industry. Thus, the Decision-Making Trial and Evaluation Laboratory (DEMATEL) technique aids in evolving a Causal Loop Diagram (CLD) in the SD modeling stages. After performing the consistency and extreme tests, the model is verified by being applied in two case studies (an academic building and an infrastructure project) in Riyadh City, KSA. The main findings reveal that the model provided cost savings for the first and second case studies of 4.8% and 3.76%, respectively. Different experts have evaluated the developed dynamic system. According to the experts who support the developed model, the model is applicable if the contractor has a reasonable profit margin. In contrast, opponents' experts noted that the system still generates a profit margin despite change orders and project delays. The main conclusion that the experts recognize is that the approach successfully considered the relationships between the influencing factors. The findings can be utilized to create an integrated conceptual framework for construction management, which could result in a rapid and profitable project launch., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024 The Authors.)

Milk fat-based whipping cream is primarily comprised of cream and whole milk. It has melt-in-the-mouth texture and unique milk flavor. However, milk fat-based whipping cream suffers from poor emulsion stability and foam firmness. The effects of monoacylglycerols (MAGs) with different saturation degrees (M1: 98% saturation, M2: 70% saturation and M3: 30% saturation) on emulsion properties (average particle size, viscosity, and emulsion stability) and whipping properties (overrun, firmness, shape retention ability, and foam stability) of milk fat-based whipping creams were investigated in this study. MAGs significantly decreased particle sizes (from 2.84 to 1.16 μm) and enhanced viscosity (from 350 to 490 cP) of the milk fat-based emulsions (emulsion without MAGs: M0, 5.01 μm, 298 cP) ( P  < 0.05). MAGs increased the stability of the milk fat-based emulsions with lesser phase separation during centrifugation tests and lower changes in particle sizes and viscosities during temperature cycling tests. Emulsion M1 with highest degree of saturation is less likely to destabilize and phase inverse. The decrease sharply in conductivity can be attributed to the entrapment of large amounts of air. Following that, the conductivity of M1 with low variation indicating high whipping resistance and less likely to coalescence and phase separation. Adding MAGs can significantly enhance overrun (M1: 205.3%, M2: 198.5%, M3: 141.4%) as compared to the control sample (M0: 97.9%) ( P  < 0.05). In emulsions containing MAGs with high degree of saturation (M1 and M2), firmness (M1: 95 g, M2: 109 g) and shape retention ability of the whipped creams were reduced as compared to control emulsion without MAG (M0: 173 g), but the foam stability (M1: 89%, M2: 91%) was enhanced (M0: 81%); M3 (firmness: 507 g; foam stability: 66%) has the contrasted effects. Whipping cream M2 demonstrated the best whipping properties with high overrun (198.46%), good firmness (109 g), shape retention ability and foam stability (91%). Good quality whipping creams can be obtained by selecting suitable MAGs., Competing Interests: Conflict of interestThe authors declare that they have no known competing financial interest or personal relationships that could have appeared to influence the work reported in this paper., (© Association of Food Scientists & Technologists (India) 2023. Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.)

The work is devoted to the study of the functional and technological properties of oat β-glucan in low-fat milky ice cream (2% fat) in comparison with the stabilization system Cremodan ® SI 320. β-glucan (0.5%) has a greater effect on the cryoscopic temperature of ice cream mixes than Cremodan ® SI 320 in the same amount (decrease by 0.166 °C vs. 0.078 °C), which inhibits the freezing process of free water in ice cream during technological processing in the temperature range from -5 to -10 °C. Microscopy of ice cream samples after freezing and hardening shows the ability of β-glucan to form a greater number of energy bonds due to specific interaction with milk proteins. Analysis of the microstructure of ice cream samples during 28 d of storage confirms the ability of oat β-glucan to suppress the growth of ice crystals more effectively than Cremodan ® SI 320. Oat β-glucan gives ice cream a rich creamy taste, increases overrun and resistance to melting, which brings this type of frozen dessert closer to a full-fat analogue (10% fat).

Nearly one-half of all construction projects exceed planned costs and schedule, globally [1]. Owners and construction managers can analyze historical project performance data to inform cost and schedule overrun risk-reduction strategies. Though, the majority of open-source project datasets are limited by the number of projects, data dimensionality, and location. A significant global customer of the construction industry, the Department of Defense (DoD) maintains a vast database of historical project data that can be used to determine the sources and magnitude of construction schedule and cost overruns for many continental and international locations. The selection of data provided by the authors is a subset of the U.S. Federal Procurement Data System-Next Generation (FPDS-NG), which stores contractual obligations made by the U.S. Federal Government [2]. The data comprises more than ten fiscal years (1 Oct 2009 - 04 June 2020) of construction contract attributes that will enable researchers to investigate spatiotemporal schedule and cost performance by, but not limited to: contract type, construction type, delivery method, award date, and award value. To the knowledge of the authors, this is the most extensive open-source dataset of its kind, as it provides access to the contract data of 132,662 uniquely identified construction projects totaling $865 billion. Because the DoD's facilities and infrastructure construction requirements and use of private construction firms are congruent with the remainder of the public sector and the private sector, results obtained from analyses of this dataset may be appropriate for broader application., Competing Interests: The Air Force Civil Engineer Center (AFCEC) is the sponsor of this ongoing research effort. The authors declare that they have no known competing financial interests or personal relationships which have, or could be perceived to have, influenced the work reported in this article.

The present study examines the foaming behavior of pea and faba bean protein concentrates and isolates and explores the impact of pH and protein-polysaccharide complexation on overrun and foam stability. Foams were prepared with 5 wt% proteins with and without 0.25 wt% xanthan gum (XG) at pH 3, 5, 7 and 9. Most foams were unstable without XG. With XG foaming properties of protein concentrates were better than isolates. Irrespective of protein type and content, all protein-XG foams at pH 3 destabilized due to large insoluble complexes, however, at pH 5 foams were stable due to smaller size of insoluble complexes. Both the protein concentrate-XG foams were stable at pH 7 and 9 due to optimum viscosity and surface tension of the soluble complexes. Overall, the study revealed that the overrun and stability of pulse protein foams can be significantly improved by adding XG and controlling their intermolecular interactions as a function of pH., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020. Published by Elsevier Ltd.)

Background: Recombinant plant-based whipping cream (RSWC) has been widely studied in recent years. The present study investigated the effects of soybean protein and its hydrolysates on the stability and physical properties of the RSWC. The RSWC was made with 28% soybean oil bodies and 4% additional soy proteins or its hydrolysates. The proteins used were soy protein isolate, 7S, 11S, oil body protein, soybean proteins isolate hydrolyzed by pepsin (SPHPe) and soybean protein isolate hydrolyzed by papain (SPHPa)., Results: RSWC made with SPHPa containing a large amount of small-molecule polypeptide had the lowest apparent viscosity, shortest whipping time, best overrun and worst whipping stability, whereas RSWC made with SPHPe containing the α, β subunit and small-molecule polypeptides exhibited the second highest overrun and best whipping stability. The partial coalescence of fat and confocal micrographs of cream emulsions suggested that oil body protein was displaced by the small peptides from the interface, which led to partial destabilization and sufficient coalescence of fat globules after aging and whipping., Conclusion: Selectively hydrolyzed soy protein, such as SPHPe, can be used for the production of RSWC with sufficient overrun and whipping stability. This research is of great significance and opens a route to production of the recombinant plant-based cream in the future. © 2020 Society of Chemical Industry., (© 2020 Society of Chemical Industry.)

Air incorporated during dynamic freezing influences the development of the microstructure and the final texture of frozen desserts. Frozen desserts were manufactured with 100-175% overrun from a constant ice cream mix formulation. Microstructural elements (fat, air, and ice phases) of the frozen desserts were then investigated and related to the melting, rheological, and sensory properties of the product. Mean ice crystal and air cell size were found to decrease with increasing overrun, and the extent of fat destabilization increased. Frozen desserts manufactured with higher overrun had slower drip-through rate and better shape retention after melting at ambient conditions, demonstrating that fat destabilization and the interplay of fat, air, and serum phases affect the melting behavior. Structural elements also influenced the rheological behavior, as measured by oscillatory thermo-rheometry. Frozen desserts had similar rheological properties at temperatures below the freezing point due to the presence of ice, and the values of G' and G″ (solid-like and viscous-like character, respectively) increased with increasing overrun above the freezing point, corresponding to a more solid-like structure. Slight differences in sensory denseness and breakdown were detected, but sensory texture was not significantly different for the frozen desserts studied. This study provided insights into the role of air in ice cream and frozen desserts, and its influence on product texture., (© 2019 Wiley Periodicals, Inc.)

Background: The maintenance and strengthening of public health and the prevention of diseases associated with the malnutrition of children and adults is an urgent and acute problem facing the population of the whole world. Diabetes type 2 has become a serious problem for modern medicine. This disease is widespread throughout the world among children and adolescents. There are substantial grounds to believe that this global incidence is related to obesity and physical inactivity. There is a diverse assortment of ice-creams and frozen desserts available all around the world. Even with the development of the ice-cream industry, frozen desserts for people suffering from diabetes type I and II have not been sufficiently developed. Therefore, this study aims to select low-calorie components for use in the manufacture of sherbet ice-cream without sucrose in their composition, with a low glycemic index and with a high content of protein and vitamins., Methods: Tо develop the technology and formulation of the product, a combination of appropriate starter cultures and their ratios were determined. The most suitable fruit mix with a low glycemic index was chosen to maintain the product with properties desirable to consumers., Results: Combined starter cultures, consisting of CHN-22 and St-Body 1 at a ratio of 7:3 were selected experimentally. The best thixotropic properties were shown by the test samples with a titratable acidity of 60&ndash;65&deg;Т at a fermentation temperature of 33 &plusmn;1&deg;C. The fruit mixture for the sherbet ice-cream was made from fruits and berries recommended for people with diabetes, including cherries, blueberries and lingonberries at a ratio of 3:4:3, respectively. The part of the mixture that was inserted into the sherbet ice-cream was evaluated as 25% of the weight of the final mixture. Stevioside and syrup of Jerusalem artichoke were selected at amounts of 0.05% and 7.5% by weight of the mixture respectively. The resulting sherbet was not inferior in sweetness to the control sample with 21% sucrose. The shelf life of the low-fat fermented sherbet ice-cream without sugar was obtained according to the results of research on organoleptic, physicochemical and microbiological properties and was substantiated as 3 months at 18&deg;С., Conclusions: The presented production procedure enables the manufacture of a low-fat, sugar-free product with preventive and therapeutic properties for people who suffer from diabetes and obesity. Studies were conducted on the influence of the introduced starter cultures and sweeteners on the organoleptic, physicochemical and rheological parameters of the developed low-fat frozen sherbet. Starter cultures and doses of stevioside which had a favorable effect on the indicators of the finished product were selected.

Introduction: From 2015, medical education has introduced a cost-reimbursement for medical students who do not reach the yearly rising weighted average. Aim: The authors examine the dropout behaviour of Hungarian medical students. Method: Analysis of the Higher Education Information System based on the database of those who started their medical studies in 2010 (n = 1046). Results: Early retardation of credit accumulation, the use of passive semesters are typical for dropouts. 83.6% of those who started their studies studied in state-funded education, with 9.4% dropouts among them, 50% among cost-reimbursement students. Multivariate analysis revealed the factors affecting dropout. Conclusion: The chances of dropping out are increased by the low credit number, the number of passive semesters, the cost-reimbursement financing form. A dormitory residence is safety net, the student can make social capital that can support the success of his studies. Orv Hetil. 2019; 160(21): 829-834.

A complete factorial design (2 3 ) was used to determine the influence of chia mucilage concentration (CM), locust bean gum (LBG) and base maturation time (BMT) on 14 formulations of goat milk frozen dessert. Chia mucilage was obtained by chia grain hydration (1:40) under stirring for 2 h, at 80 °C and pH of 9.0. The samples were centrifuged, as well as lyophilised to compare yields. The extraction yield of lyophilised CM was lower than 10%. The addition of LBG and CM at higher levels, influenced by BMT, increased the moisture content and the apparent viscosity of the base mixture. These formulations presented higher values for texture and lower of overrun due to the difficulty of incorporating and stabilising bubbles during whipping and freezing processes. The melting rate was also dependent on the variables analysed, and a delay in melting was observed, even in the formulations with lower fat content. CM increased the luminosity parameter proportionally to its content and provided a significant reduction of fat (up to 3.10 g 100 g -1 ) and energy value. The application of CM reduced the texture value, which was an interesting technological characteristic for frozen dessert.