Search

The structure and transport properties of the new Cellokon-AKH membrane based on animal cellulose obtained from tunic of ascidian Halocynthia aurantium were studied. The results of scanning electron microscopy (SEM), FTIR spectroscopy, and the X-ray diffraction data revealed significant differences in the structure and morphology of upper and lower surfaces of this layered film membrane based on animal cellulose. It was shown that the membrane surface is a network of intertwined cellulose fibers, with both denser and looser areas present on the lower surface compared to the completely uniform morphology of the main part of the upper surface. The hierarchical structure of tunicin-based outgrowths evenly distributed over the upper surface was determined and analyzed. The 3D visual representation of the surface structure was performed with the surface reconstruction technique using scanning electron microscope images. A surface model was calculated from the aligned images based on the photogrammetric approach. The transport properties of samples with different prehistory with respect to ethanol, water, and their mixtures of different compositions were studied depending on the pressure. Representing an alcohol-containing gel film in its original state, as solvents are removed, the membrane transforms into a low-permeability fibrillary organized selective film. The obtained results confirmed the possibility of using Cellokon-AKH (dried form) for the filtration of substances with a molecular weight of more than 600 Da in various media. Further study of this new material will allow to get closer to understanding the structure of the studied seabed inhabitants and to use these natural resources more efficiently.

Improving the thruster efficiency is a crucial challenge for the development of space electric propulsion systems, especially advanced air-breathing thrusters utilizing the surrounding rarefied atmosphere as fuel. A significant reduction in thruster power consumption can be achieved by using field emission (FE) cathodes that do not require heating and have the highest energy efficiency. In this work, we study FE from nano-graphite thin films, consisting of carbon nanostructures with a high aspect ratio, and demonstrate their suitability for use in the space electric propulsion systems. The films shown appropriate FE characteristics in a wide range of gas pressures at high current loads in constant and pulsed operation modes. Based on the obtained experimental results, nano-graphite cathodes were employed for the design of an electron gun with increased reliability and minimized energy losses associated with electron extraction. The possibility of using such a gun in a specific air-breathing satellite operating in low Earth orbits is demonstrated., (© 2022 IOP Publishing Ltd.)

Hypothesis: Interpenetrating networks consisting of a polymer network with dynamic cross-links and a supramolecular network allow obtaining hydrogels with significantly enhanced mechanical properties., Experiments: Binary hydrogels composed of a dynamically cross-linked poly(vinyl alcohol) (PVA) network and a transient network of entangled highly charged mixed wormlike micelles (WLMs) of surfactants (potassium oleate and n-octyltrimethylammonium bromide) were prepared and studied by rheometry, SANS, USANS, cryo-TEM, and NMR spectroscopy., Findings: Binary hydrogels show significantly enhanced rheological properties (a 3400-fold higher viscosity and 27-fold higher plateau modulus) as compared to their components taken separately. This is due to the microphase separation leading to local concentrating of PVA and WLMs providing larger number of polymer-polymer contacts for cross-linking and longer WLMs with more entanglements. Such materials are very promising for the application in many areas, ranging from enhanced oil recovery to biomedical uses., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier Inc. All rights reserved.)

Modular nanotransporters (MNTs) are multifunctional chimeric polypeptides for the multistep transport of locally acting cytotoxic agents into the nuclei of cancer target cells. MNTs consist of several polypeptide domains (functional modules) for the recognition of a cell-surface internalizable receptor, pH-dependent endosomal escape and subsequent transport into the nucleus through the nuclear pores. MNTs are a promising means for cancer treatment. As has been shown previously, all of the modules of MNTs retain their functionalities. Despite their importance, there is no structural information available about these chimeric polypeptides, which hampers the creation of new MNT variants. Here, a low-resolution 3D structure of an MNT is presented which was obtained by atomic force microscopy, transmission electron microscopy and small-angle X-ray scattering coupled to size-exclusion chromatography. The data suggest that the MNT can adopt two main conformations, but in both conformations the protein N- and C-termini are distanced and do not influence each other. The change in the MNT conformation during acidification of the medium was also studied. It was shown that the fraction of the elongated conformation increases upon acidification. The results of this work will be useful for the development of MNTs that are suitable for clinical trials and possible therapeutic applications.

Studies of the effects produced by the solubilization of hydrophobic substances by micellar aggregates in water medium are quite important for applications of viscoelastic surfactant solutions for enhanced oil recovery (EOR), especially in hydraulic fracturing technology. The present paper aims at the investigation of the structural transformations produced by the absorption of an aliphatic hydrocarbon (n-decane) by mixed wormlike micelles of cationic (n-octyltrimethylammonium bromide, C8TAB) and anionic (potassium oleate) surfactants enriched by C8TAB. As a result of contact with a small amount (0.5 wt%) of oil, a highly viscoelastic fluid is transformed to a water-like liquid. By small-angle neutron scattering (SANS) combined with cryo-TEM, it was shown that this is due to the transition of long wormlike micelles with elliptical cross-sections to ellipsoidal microemulsion droplets. The non-spherical shape was attributed to partial segregation of longer- and shorter-tail surfactant molecules inside the surfactant monolayer, providing an optimum curvature for both of them. As a result, the long-chain surfactant could preferably be located in the flatter part of the aggregates and the short-chain surfactant-at the ellipsoid edges with higher curvature. It is proven that the transition proceeds via a co-existence of microemulsion droplets and wormlike micelles, and upon the increase of hydrocarbon content, the size and volume fraction of ellipsoidal microemulsion droplets increase. The internal structure of the droplets was revealed by contrast variation SANS, and it was shown that, despite the excess of the cationic surfactant, the radius of surfactant shell is controlled by the anionic surfactant with longer tail. These findings open a way for optimizing the performance of viscoelastic surfactant fluids by regulating both the mechanical properties of the fluids and their clean-up from the fracture induced by contact with hydrocarbons.

The synthesis of magnetite (Fe 3 O 4 ) nanorods using reverse co-precipitation of Fe 3+ and Fe 2+ ions in the presence of a static magnetic field is reported in this work. The phase composition and crystal structure of the synthesized material were investigated using electron diffraction, Raman spectroscopy, and transmission electron microscopy. It was shown that the morphology of the reaction product strongly depends on the amount of OH - ions in the reaction mixture, varying from Fe 3 O 4 nanorods to spherical Fe 3 O 4 nanoparticles. Fe 3 O 4 nanorods were examined using high-resolution transmission electron microscopy proving that they are single-crystalline and do not have any preferred crystallographic orientation along the axis of the rods. According to the data obtained a growth mechanism was proposed for the rods that consists of the dipole-dipole interaction between their building blocks (small hexagonal faceted magnetite nanocrystals), which are formed during the first step of the reaction. The study suggests a facile, green and controllable method for synthesizing anisotropic magnetic nanoparticles in the absence of stabilizers, which is important for further modification of their surfaces and/or incorporation of the nanoparticles into different media., (Copyright © 2020, Shibaev et al.; licensee Beilstein-Institut.)

Under severe or prolonged stress, bacteria produce a nonspecific DNA-binding protein (Dps), which effectively protects DNA against damaging agents both in vitro and in vivo by forming intracellular biocrystals. The phenomenon of protective crystallization of DNA in living cells has been intensively investigated during the last two decades; however, the results of studies are somewhat contradictory, and up to now, there has been no direct determination of a Dps-DNA crystal structure. Here, we report the in vitro analysis of the vital process of Dps-DNA co-crystallization using two complementary structural methods: synchrotron small-angle X-ray scattering in solution and cryo-electron tomography. Importantly, for the first time, the DNA in the co-crystals was visualized, and the lattice parameters of the crystalline Dps-DNA complex were determined., (© 2019 Federation of European Biochemical Societies.)

Self-supporting multilayer films containing a polyelectrolyte complex (PEC) were prepared by the sequential layering of sodium hyaluronate (HA, MW 5.4 × 10 4 ) and chitosan (CS, MW 1.6 × 10 5 , the degree of deacetylation 0.80) in different orders. Imaging with low-voltage scanning electron microscopy (LVSEM) showed that the CS/HA films had a multilayer structure, while X-ray diffraction (XRD) indicated significant structuring of the CS layer near the PEC-CS region. Analysis of the thermal properties of the CS/HA films revealed differences in the structural organization and morphological features of the polymer layers and high thermal stability of the PEC layer. Testing of the transport properties of the CS/HA film in pervaporation (PV) separation using different compositions of ethanol-water mixtures indicated that the multilayer membrane was selective across a wide range of concentrations in the feed. Separation of an azeotropic ethanol-water mixture containing 5 wt% water yielded a permeate consisting of about 100 wt% water. LVSEM revealed that the membrane microstructure changed during the PV process due to membrane swelling and changes in the arrangement of the macromolecules during transport of the penetrant. The results support the use of CS/HA composite films as highly effective PV membranes. In addition to pervaporation separation, CS/HA multilayer films can also be used for drug delivery, tissue engineering, and wound healing applications., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Exposure to toxic halogenated polyaromatic hydrocarbons, of which 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) is the most potent, induces diverse skin pathologies in humans, including chloracne, hyperkeratosis, hamartomas, etc. While the toxic effects of TCDD have been extensively studied, effective approaches to their treatment are still lacking. Retinoids are commonly used in therapy of acneiform skin diseases. In vitro, retinoids elicit antagonistic effects on keratinocyte differentiation and proliferation, as compared to TCDD, suggesting their potential in treatment of TCDD-induced skin lesions. Nevertheless, the modulation of TCDD activity in skin by retinoids in vivo was never reported. We have used N-TERT keratinocyte cell line and hairless (hr) mice to determine if retinoic acid (RA) can lessen or reverse TCDD-induced effects in vitro and in vivo. RA co-treatment suppressed TCDD-induced changes in the expression of differentiation-associated genes and N-TERT keratinocyte viability in vitro. However, in hairless mice (in vivo), RA/TCDD co-treatment produced more severe effects, than treatment with either of the two compounds individually. RA/TCDD co-application to mouse skin strongly stimulated keratinocyte proliferation, resulting in dramatic epidermal hyperplasia. It has also led to massive immune cell infiltration into the dermis, and increased mRNA expression of inflammation markers, including IL1β, IL6 and S100A7. Thus, retinoids not only appeared ineffective in treatment of TCDD-induced skin lesions in hairless mice, but also resulted in their exaggeration. These in vivo results question previous cell culture-based claims that RA may reduce TCDD-induced skin effects and caution against the reliance on in vitro data in TCDD toxicology research., (Copyright © 2018 Elsevier Inc. All rights reserved.)

Pathogenesis of numerous diseases is associated with the formation of amyloid fibrils. Extrinsic fluorescent dyes, including Thioflavin T (ThT), are used to follow the fibrillation kinetics. It has recently been reported that the so-called deep-blue autofluorescence (dbAF) is changing during the aggregation process. However, the origin of dbAF and the reasons for its change remain debatable. Here, the kinetics of fibril formation in model proteins were comprehensively analyzed using fluorescence lifetime and intensity of ThT, intrinsic fluorescence of proteinaceous fluorophores, and dbAF. For all systems, intensity enhancement of the dbAF band with similar spectral parameters (∼350 nm excitation; ∼450 nm emission) was observed. Although the time course of ThT lifetime (indicative of protofibrils formation) coincided with that of tyrosine residues in insulin, and the kinetic changes in the ThT fluorescence intensity (reflecting formation of mature fibrils) coincided with changes in ThT absorption spectrum, the dbAF band started to increase from the beginning of the incubation process without a lag-phase. Our mass-spectrometry data and model experiments suggested that dbAF could be at least partially related to oxidation of amino acids. This study scrutinizes the dbAF features in the context of the existing hypotheses about the origin of this spectral band., (Copyright © 2018 Elsevier Inc. All rights reserved.)

Two-ply composite membranes with separation layers from chitosan and sulfoethylcellulose were developed on a microporous support based on poly(diphenylsulfone- N -phenylphthalimide) and investigated by use of X-ray diffraction and scanning electron microscopy methods. The pervaporation properties of the membranes were studied for the separation of aqueous alcohol (ethanol, propan-2-ol) mixtures of different compositions. When the mixtures to be separated consist of less than 15 wt % water in propan-2-ol, the membranes composed of polyelectrolytes with the same molar fraction of ionogenic groups (-NH₃⁺ for chitosan and -SO₃ - for sulfoethylcellulose) show high permselectivity (the water content in the permeate was 100%). Factors affecting the structure of a non-porous layer of the polyelectrolyte complex formed on the substrate surface and the contribution of that complex to changes in the transport properties of membranes are discussed. The results indicate significant prospects for the use of chitosan and sulfoethylcellulose for the formation of highly selective pervaporation membranes.

Squid β-chitin has been exfoliated in aqueous acrylic acid (AA), after which a composite film of chitin microfibrils in polyacrylic acid (PAA) has been prepared by in situ polymerization of the AA. The segregated chitin fibrils in the composite are 4-6nm in diameter, with an aspect ratio >250. After drying cast films of the composites containing 1, 2 and 3% (w/w) chitin at 140°C for four hours, there was a dramatic resistance to swelling in water, in that the dried films showed only small changes in shape and properties after four hours immersed in water.The most profound impact of the reinforcement on the mechanical properties is observed at high relative humidity (RH), when the PAA is in the rubbery state. At 97.5% RH and room temperature, the elastic moduli of the composites with 1, 2 and 3% (w/w) chitin were 150, 230 and 2100MPa respectively, compared to 65MPa for pure PAA. The main contribution to the filler-reinforcing effect is the high aspect ratio of fibrils and non-covalent interactions, but the stability in water suggests the presence of chemical bonding between the PAA and chitin., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Rheological properties of aqueous solutions of long-tailed cationic surfactant erucyl bis-(hydroxyethyl)methylammonium chloride (EHAC) were examined as a function of concentration C s of different inorganic salts (KCl, CaCl 2 , and LaCl 3 ) at a fixed surfactant concentration of 0.6 wt %. The structural evolution of micelles was followed by small-angle neutron scattering and cryogenic transmission electron microscopy. It was observed that, upon addition of salt, the zero-shear viscosity η 0 of semidilute surfactant solutions goes through a maximum by passing the following three regimes: η 0 ∼ C s 10 (regime I), η 0 ∼ C s 3.5 (regime II), and η 0 ∼ C s -2 (regime III). In regime I, the micelles grow in length; in regime II, the linear growth of micelles proceeds simultaneously with their branching; and in regime III, the branching becomes dominating. With increase in the salt valence, the viscosity curves shift to a lower salt content, indicating that these salts are more effective in inducing micellar elongation and branching, as they contain a larger amount of anionic species Cl - screening the repulsion between cationic surfactant heads. Diverse roles of salt co- and counterions (i.e., salt ions that are similar and oppositely charged with respect to surfactant head groups) at different salt concentrations were demonstrated. It was shown that at low salt concentrations corresponding to the rising branch of the viscosity curve (regimes I and II), salt counterions (Cl - ) fully determine the rheological behavior of the system. At high salt concentrations, when the electrostatic repulsions between micelles and salt co-ions are essentially screened, the co-ions start affecting the rheological properties. Under these conditions, monovalent co-ions (K + ) provide much lower viscosity of surfactant solutions than the multivalent ones (Ca 2+ , La 3+ ), which is consistent with theoretical predictions that suggest the penetration of K + inside the micellar corona increasing the charge of the micelles and therefore hindering their growth.