Search

The bean leaf beetle (BLB) ( Ootheca spp.) is a polyphagous pest causing significant yield losses in Uganda, particularly in the Northern and Eastern regions on various hosts plants. Despite its polyphagous behaviour, the BLB exhibits preferential feeding, offering an opportunity for targeted pest management. This study explored its feeding preferences across seven crops: common bean, cowpea, greengram, okra, roselle ( malakwang ), groundnuts, and soybean. This study was conducted in Arua and Lira districts using a randomized complete block design for two rainy seasons (2018A and 2018B). The results showed significant differences in BLB abundance and foliar damage among host crops, locations, days after planting and seasons. Cowpea was the most preferred crop while groundnuts was the least preferred. Therefore, cowpea can be recommended for use as a trap for managing Ootheca spp. in gardens where it is not the main crop. There was a higher pest abundance in Arua than in Lira. There was also a higher pest abundance in 2018A than in 2018B. These findings highlight the importance of understanding BLB's feeding preferences for implementing effective IPM strategies, emphasizing the potential role of trap cropping, especially with cowpea, to minimize BLB damage in resource-constrained agricultural settings.

Climate change poses daunting challenges to agricultural production and food security. Rising temperatures, shifting weather patterns, and more frequent extreme events have already demonstrated their effects on local, regional, and global agricultural systems. Crop varieties that withstand climate-related stresses and are suitable for cultivation in innovative cropping systems will be crucial to maximize risk avoidance, productivity, and profitability under climate-changed environments. We surveyed 588 expert stakeholders to predict current and novel traits that may be essential for future pearl millet, sorghum, maize, groundnut, cowpea, and common bean varieties, particularly in sub-Saharan Africa. We then review the current progress and prospects for breeding three prioritized future-essential traits for each of these crops. Experts predict that most current breeding priorities will remain important, but that rates of genetic gain must increase to keep pace with climate challenges and consumer demands. Importantly, the predicted future-essential traits include innovative breeding targets that must also be prioritized; for example, (1) optimized rhizosphere microbiome, with benefits for P, N, and water use efficiency, (2) optimized performance across or in specific cropping systems, (3) lower nighttime respiration, (4) improved stover quality, and (5) increased early vigor. We further discuss cutting-edge tools and approaches to discover, validate, and incorporate novel genetic diversity from exotic germplasm into breeding populations with unprecedented precision, accuracy, and speed. We conclude that the greatest challenge to developing crop varieties to win the race between climate change and food security might be our innovativeness in defining and boldness to breed for the traits of tomorrow., (Copyright © 2023 The Author. Published by Elsevier Inc. All rights reserved.)

Common bean is the world's most important directly consumed legume food crop that is popular for calories, protein and micronutrients. It is a staple food in sub-Saharan Africa, and a significant source of iron for anemic people. However, several pests, soil and weather challenges still impede its production. Long cooking time, and high phytic acid and polyphenols that influence bioavailable iron also limit the health benefits. To inform population improvement strategies and selection decisions for resilient fast cooking and iron biofortified beans, the study determined diversity and population structure within 427 breeding lines, varieties, or landraces mostly from Alliance Uganda and Columbia. The genotypes were evaluated for days to flowering and physiological maturity, yield, seed iron (FESEED) and zinc (ZNSEED) and cooking time (COOKT). Data for all traits showed significant (P≤0.001) differences among the genotypes. Repeatability was moderate to high for most traits. Performance ranged from 52 to 87 ppm (FESEED), 23-38 ppm (ZNSEED), 36-361 minutes (COOKT), and 397-1299 kg/ha (yield). Minimal differences existed between the gene pools in the mean performance except in yield, where Mesoamerican beans were better by 117 kg/ha. The genotypes exhibited high genetic diversity and thus have a high potential for use in plant breeding. Improvement of FESEED and ZNSEED, COOKT and yield performance within some markets such as red and small white beans is possible. Hybridization across market classes especially for yellow beans is essential but this could be avoided by adding other elite lines to the population. Superior yielding and fast cooking, yellow and large white beans were specifically lacking. Adding Fe dense elite lines to the population is also recommended. The population was clustered into three groups that could be considered for specific breeding targets based on trait correlations., Competing Interests: NO authors have competing interests., (Copyright: This is an open access article, free of all copyright, and may be freely reproduced, distributed, transmitted, modified, built upon, or otherwise used by anyone for any lawful purpose. The work is made available under the Creative Commons CC0 public domain dedication.)

Bean leaf beetles (BLBs) ( Ootheca spp.) are serious legume pests in Uganda and sub-Saharan Africa, but their ecology is not well understood. We planted host plants, viz., common bean, cowpea, and soybean, in an experiment in the hotspot areas of Arua and Lira districts in Northern Uganda in order to assess their influence on the density of adults and immature stages of BLBs in different seasons. Overall, the number of adults, larvae, and pupae were higher in cowpea than common bean and soybean plots. The number of adults were highest in cowpea (29.5 adults/15 plants) in Arua during the long rainy season (2018A). The number of adults did not differ significantly during short rains (season B) in 2017 and 2018. Similarly, in Lira district, the highest number of adult BLBs was in cowpea (4.6 beetles) compared to the common bean (2.7 beetles) and soybean plots, with a peak at four weeks after planting (WAP). During 2018A, larvae of BLBs first appeared at five WAP and seven WAP and peaked at 13 WAP and 11 WAP in Arua and Lira, respectively. The pupae were present in the soil after the harvesting of crops during 2018A, but peaked at seven WAP and eight WAP in 2018B season in Arua and Lira, respectively. The occurrence of below-ground adults in 2018B followed the peak abundance of pupae, although this was delayed until six WAP in Arua compared to Lira. We conclude that cowpea is the most preferred by adults and larvae compared to common bean and soybean. Similarly, the first rain season (2018A) attracted higher abundance and damage than the second rain season. Management of the BLBs should thus take into consideration avoidance of host crop rotation and dealing with the below-ground stages.

Bean leaf beetles ( Ootheca spp.) (Coleoptera: Chrysomelidae) are one of Africa's most important pests of the common bean ( Phaseolus vulgaris L.). Roots, leaves, floral parts, and young pods are all attacked, leading to a considerable loss in grain yield. In Uganda, there are no comprehensive prescribed management strategies for bean leaf beetles, but farmers typically try to control the pest by delaying bean crop sowing, and to a lesser extent, using insecticides. Although farmers have consistently implemented the two approaches, there is no information on the effects of the approaches in Uganda. To assess the impact of planting timing and insecticide spray regimes on bean leaf beetle populations, concomitant foliar damage, and grain yield, we set up trials in three agro-ecological zones with known presence of the beetles during the second rainy season of 2016 (2016) and the first rainy season of 2017 (2017). The first planting, coinciding with early planting, was conducted within one week after the onset of rains. The second planting, coinciding with mid planting, followed two weeks later, while the third planting, considered late planting in this study, was conducted one month after the second planting. A foliar application of cypermethrin commencing at 7 days after emergence (DAE), 14 DAE, 21 DAE, 28 DAE, and 35 DAE; a soil drench of imidacloprid at planting combined with a foliar spray starting at 7 DAE; and an untreated control were among the insecticide spray regimes evaluated. Higher bean leaf beetle abundance was recorded from mid-planting, while higher foliar damage was recorded from late planting in two of the three agro-ecological zones. However, higher marketable grain yield was recorded from early planting in all agro-ecological zones, suggesting that delayed planting may not be beneficial. Insecticide application reduced foliar damage and increased marketable grain yield, with a combination of soil drench and foliar spray resulting in much less foliar damage and, as a result, higher grain yield. However, this did not result in economic benefits. Furthermore, marketable grain yield was higher when insecticide spray regimes were combined with early planting in all agro-ecological zones during both seasons. Our findings suggest that the common bean should be planted early and that the control of the bean leaf beetle should target both the adults and the juvenile stages in the soil. Therefore, there is a need for farmers to be able to access less-expensive soil treatments.

Bean leaf beetle (BLB) ( Ootheca mutabilis ) has emerged as an important bean pest in Uganda, leading to devastating crop losses. There is limited information on the population genetic structure of BLB despite its importance. In this study, novel microsatellite DNA markers and the partial mitochondrial cytochrome oxidase subunit I (mt COI ) gene sequences were used to analyze the spatial population genetic structure, genetic differentiation and haplotype diversity of 86 O. mutabilis samples from 16 (districts) populations. We identified 19,356 simple sequence repeats (SSRs) (mono, di-, tri-, tetra-, penta-, and hexa-nucleotides) of which 81 di, tri and tetra-nucleotides were selected for primer synthesis. Five highly polymorphic SSR markers (4-21 alleles, heterozygosity 0.59-0.84, polymorphic information content (PIC) 50.13-83.14%) were used for this study. Analyses of the 16 O. mutabilis populations with these five novel SSRs found nearly all the genetic variation occurring within populations and there was no evidence of genetic differentiation detected for both types of markers. Also, there was no evidence of isolation by distance between geographical and genetic distances for SSR data and mt COI data except in one agro-ecological zone for mt COI data. Bayesian clustering identified a signature of admixture that suggests genetic contributions from two hypothetical ancestral genetic lineages for both types of markers, and the minimum-spanning haplotype network showed low differentiation in minor haplotypes from the most common haplotype with the most common haplotype occurring in all the 16 districts. A lack of genetic differentiation indicates unrestricted migrations between populations. This information will contribute to the design of BLB control strategies.

Bean leaf beetles ( Ootheca spp.) (Insecta: Coleoptera: Chrysomelidae) are one of Africa's most destructive pests of common bean and other leguminous crops. The beetles are widely distributed in Africa where they are estimated to cause annual crop yield losses of 116,400 tons of crop yields in sub-Saharan Africa. Despite their importance, little is known about the distribution, relative abundance and damage caused by bean leaf beetles in Uganda. As a result, the development of effective management methods has been hampered. We conducted surveys in six key Ugandan agro-ecological zones to determine the species distribution and relative abundance of bean leaf beetles. Findings indicate that leaf beetles belonging to 12 genera are present, including members of the genera Afrophthalma Medvedev, 1980, Buphonella Jacoby, 1903, Chrysochrus Chevrolat in Dejean, 1836, Diacantha Dejean, 1845, Exosoma Jacoby, 1903, Lamprocopa Hincks, 1949, Lema Fabricius, 1798, Nisotra Baly, 1864, Neobarombiella Bolz and Wagner, 2012, Ootheca Dejean, 1935, Parasbecesta Laboissière, 1940, and Plagiodera Dejean, 1835. We identified only three species belonging to the genus Ootheca : O. mutabilis , O. proteus , and O. orientalis . Seventy percent of all the beetles collected were O. mutabilis and these were present in all agro-ecological zones studied. The Northern Moist Farmlands (21.9%), West Nile Farmlands (12.9%), Central Wooded Savanna (4.4%) and Southern and Eastern Lake Kyoga Basin (1.4%) were the only agro-ecological zones where O. proteus was found. Only one specimen of O. orientalis was found at a single site in the Central Wooded Savanna. The Northern Moist Farmlands had a significantly ( p < 0.05) higher bean leaf beetle density than the West Nile Farmlands and Southwestern Highlands. Similarly, the Northern Moist Farmlands had the highest beetle foliar damage per plant (1.15 ± 0.05), while the Southwestern Highlands had the lowest (0.03 ± 0.02). We provide the first information on Ootheca species distribution, abundance and damage in Uganda. Our findings provide a foundation for assessing the importance of Ootheca spp. as common bean pests in Uganda.

Iron and zinc malnutrition are global public health concerns afflicting mostly infants, children, and women in low- and middle-income countries with widespread consumption of plant-based diets. Common bean is a widely consumed staple crop around the world and is an excellent source of protein, fiber, and minerals including iron and zinc. The development of nutrient-dense common bean varieties that deliver more bioavailable iron and zinc with a high level of trait stability requires a measurement of the contributions from genotype, environment, and genotype by environment interactions. In this research, we investigated the magnitude of genotype by environment interaction for seed zinc and iron concentration and seed iron bioavailability (FeBIO) using a set of nine test genotypes and three farmers' local check varieties. The research germplasm was evaluated for two field seasons across nine on-farm locations in three agro-ecological zones in Uganda. Seed zinc concentration ranged from 18.0 to 42.0 μg g -1 and was largely controlled by genotype, location, and the interaction between location and season [28.0, 26.2, and 14.7% of phenotypic variability explained (PVE), respectively]. Within a genotype, zinc concentration ranged on average 12 μg g -1 across environments. Seed iron concentration varied from 40.7 to 96.7 μg g -1 and was largely controlled by genotype, location, and the interaction between genotype, location, and season (25.7, 17.4, and 13.7% of PVE, respectively). Within a genotype, iron concentration ranged on average 28 μg g -1 across environments. Seed FeBIO ranged from 8 to 116% of Merlin navy control and was largely controlled by genotype (68.3% of PVE). The red mottled genotypes (Rozi Koko and Chijar) accumulated the most seed zinc and iron concentration, while the yellow (Ervilha and Cebo Cela) and white (Blanco Fanesquero) genotypes had the highest seed FeBIO and performed better than the three farmers' local check genotypes (NABE-4, NABE-15, and Masindi yellow). The genotypes with superior and stable trait performance, especially the Manteca seed class which combine high iron and zinc concentrations with high FeBIO, would serve as valuable parental materials for crop improvement breeding programs aimed at enhancing the nutritional value of the common bean., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2021 Katuuramu, Wiesinger, Luyima, Nkalubo, Glahn and Cichy.)

Common bean variety choice by farmers in Uganda is driven by seed yield plus end-use quality traits like market class and cooking time. Limited genotype by environment information is available for traits valued by consumers. This research evaluated yield, seed size, hydration properties, and cooking time of 15 common bean genotypes within market classes recognized by consumers along with three farmers' checks at nine on-farm locations in Uganda for two seasons. Yield ranged from 71 to 3,216 kg ha -1 and was largely controlled by location (21.5% of Total Sums of Squares [TSS]), plus the interaction between location and season (48.6% of TSS). Cooking time varied from 19 to 271 minutes with the genotypes Cebo Cela and Ervilha consistently cooking fastest in 24 and 27 minutes respectively. Comparatively, the local checks (NABE-4, NABE-15, and Masindi yellow) took 35 to 45 minutes to cook. Cooking time was largely controlled by genotype (40.6% of TSS). A GGE biplot analysis uncovered the presence of two mega-environments for yield and one mega-environment for cooking time. Identification of mega-environments for these traits will help expedite common bean breeding, evaluation, and variety selection through reduction of number of test environments needed for phenotype evaluations. The high yielding and fast cooking genotypes from this study can be targeted as parental materials to improve existing common bean germplasm for these important traits.

Common bean ( Phaseolus vulgaris L.) is an important legume crop worldwide. The International Centre for Tropical Agriculture (CIAT) and its national partners in Africa aim to overcome production constraints of common bean and address the food, nutrition needs and market demands through development of multitrait bean varieties. Breeding is guided by principles of market-driven approaches to develop client-demanded varieties. Germplasm accessions from especially two sister species, P. coccineus and P. acutifolius, have been utilized as sources of resistance to major production constraints and interspecific lines deployed. Elucidation of plant mechanisms governing pest and disease resistance, abiotic stress tolerance and grain nutritional quality guides the selection methods used by the breeders. Molecular markers are used to select for resistance to key diseases and insect pests. Efforts have been made to utilize modern genomic tools to increase scale, efficiency, accuracy and speed of breeding. Through gender-responsive participatory variety selection, market-demanded varieties have been released in several African countries. These new bean varieties are a key component of sustainable food systems in the tropics., Competing Interests: This paper is a review of the major outputs of the Tropical legume (TL) project Common bean breeding, genomics and genetics. It includes findings of the project but also highlights findings of other researchers on specific topics. As such, there is no conflict of interest., (© 2018 The Authors Plant Breeding Published by Blackwell Verlag GmbH.)

Legumes are important components of sustainable agricultural production, food, nutrition and income systems of developing countries. In spite of their importance, legume crop production is challenged by a number of biotic (diseases and pests) and abiotic stresses (heat, frost, drought and salinity), edaphic factors (associated with soil nutrient deficits) and policy issues (where less emphasis is put on legumes compared to priority starchy staples). Significant research and development work have been done in the past decade on important grain legumes through collaborative bilateral and multilateral projects as well as the CGIAR Research Program on Grain Legumes (CRP-GL). Through these initiatives, genomic resources and genomic tools such as draft genome sequence, resequencing data, large-scale genomewide markers, dense genetic maps, quantitative trait loci (QTLs) and diagnostic markers have been developed for further use in multiple genetic and breeding applications. Also, these mega-initiatives facilitated release of a number of new varieties and also dissemination of on-the-shelf varieties to the farmers. More efforts are needed to enhance genetic gains by reducing the time required in cultivar development through integration of genomics-assisted breeding approaches and rapid generation advancement., (© 2018 The Authors. Plant Breeding Published by Blackwell Verlag GmbH.)

Common bean ( Phaseolus vulgaris L.) is an important staple crop for smallholder farmers, particularly in Eastern and Southern Africa. To support common bean breeding and seed dissemination, a high throughput SNP genotyping platform with 1500 established SNP assays has been developed at a genotyping service provider which allows breeders without their own genotyping infrastructure to outsource such service. A set of 708 genotypes mainly composed of germplasm from African breeders and CIAT breeding program were assembled and genotyped with over 800 SNPs. Diversity analysis revealed that both Mesoamerican and Andean gene pools are in use, with an emphasis on large seeded Andean genotypes, which represents the known regional preferences. The analysis of genetic similarities among germplasm entries revealed duplicated lines with different names as well as distinct SNP patterns in identically named samples. Overall, a worrying number of inconsistencies was identified in this data set of very diverse origins. This exemplifies the necessity to develop and use a cost-effective fingerprinting platform to ensure germplasm purity for research, sharing and seed dissemination. The genetic data also allows to visualize introgressions, to identify heterozygous regions to evaluate hybridization success and to employ marker-assisted selection. This study presents a new resource for the common bean community, a SNP genotyping platform, a large SNP data set and a number of applications on how to utilize this information to improve the efficiency and quality of seed handling activities, breeding, and seed dissemination through molecular tools., Competing Interests: Compliance with ethical standardsThe authors declare no conflicts of interest.