Search

The first tunable nano-bending structures of [1]rotaxane containing a single-fluorophoric N,N'-diphenyl-dihydrodibenzo[a,c]phenazine (DPAC) moiety (i.e., [1]RA) are developed as a loosened lasso structure to feature the bright white-light emission [CIE (0.27, 0.33), Φ = 21.2%] in THF solution, where bi-stable states of bending and twisted structures of DPAC unit in [1]RA produce cyan and orange emissions at 480 and 600 nm, respectively. With acid/base controls, tunable loosened/tightened nano-loops of corresponding [1]rotaxanes (i.e., [1]RA/[1]RB) can be achieved via the shuttling of macrocycles reversibly, and thus to adjust their respective white-light/cyan emissions, where the cyan emission of [1]RB is obtained due to the largest conformational constraint of DPAC moiety in its bending form of [1]RB with a tightened lasso structure. Additionally, the non-interlocked analog M-Boc only shows the orange emission, revealing the twisted form of DPAC fluorophore in M-Boc without any conformational constraint. Moreover, the utilization of solvents (with different viscosities and polarities), temperatures, and water fractions could serve as effective tools to adjust the bi-stable vibration-induced emission (VIE) colors of [1]rotaxanes. Finally, tuning ratiometric emission colors of adaptive conformations of DPAC moieties by altering nano-bending structures in [1]rotaxanes and external stimuli can be further developed as intelligent temperature and viscosity sensor materials., (© 2024 Wiley‐VCH GmbH.)

Bistable [ c 2] daisy chain rotaxanes with respective extended and contracted forms of [ c 2 ]A and [ c 2 ]B containing a blue-emissive anthracene ( AN ) donor and orange-emissive indandione-carbazole ( IC ) acceptor were successfully synthesized via click reaction. Tunable-emission bistable [ c 2] daisy chain rotaxanes with fluorescence changes from blue to orange, including bright-white-light emissions, could be modulated by the aggregation-induced emission (AIE) characteristics and Förster resonance energy transfer (FRET) processes through altering water fractions and shuttling processes (i.e., acid/base controls). Accordingly, as a result of excellent fine-tuning AIE (at 60% water content of H 2 O/THF) and FRET (with a compatible energy transfer of E FRET = 33.2%) behaviors after the shuttling process (by adding base), the brightest white-light emission at CIE (0.31, 0.37) with a quantum yield of Φ = 15.64% was obtained in contracted [ c 2 ]B with good control of molecular shuttling to possess higher photoluminescence (PL) quantum yields and better energy transfer efficiencies (i.e., the manipulation of reduced PET and enhanced FRET processes) due to their intramolecular aggregations of blue AN donors and orange IC acceptors with a proper water content of 60% H 2 O. Furthermore, dynamic light-scattering (DLS) and time-resolved photoluminescence (TRPL) measurements, along with theoretical calculations, were utilized to investigate and confirm AIE and FRET phenomena of bistable [ c 2] daisy chain rotaxanes. Especially, both bistable [ c 2] daisy chain rotaxanes [ c 2 ]A and [ c 2 ]B and noninterlocked monomer M could be exploited for the applications of ratiometric fluorescence temperature sensing due to the temperature effects on the AIE and FRET features. Based on these desirable bistable [ c 2] daisy chain rotaxane structures, this work provides a potential strategy for the future applications of tunable multicolor emission and ratiometric fluorescence temperature-sensing materials.

Manipulations of singlet oxygen ( 1 O 2 ) generations by the integration of both aggregation-induced emission luminogen (AIEgen) photosensitizer and photochromic moieties have diversified features in photodynamic therapy applications. Through Förster resonance energy transfer (FRET) pathway to induce red PL emissions (at 595 nm) for 1 O 2 productions, [1]rotaxane containing photosensitive tetraphenylethylene (TPE) donor and photochromic diarylethene (DAE) acceptor is introduced to achieve dual and sequential locked/unlocked photoswitching effects by pH-controlled shuttling of its contracted/extended forms. Interestingly, the UV-enabled DAE ring closure speeds follow the reversed trend of DAE self-constraint degree as: contracted < extended < noninterlocked forms in [1]rotaxane analogues, thus FRET processes can be adjusted in contracted/extended forms of [1]rotaxane upon UV irradiations. Accordingly, the contracted form of [1]rotaxane is FRET-OFF locked and inert to UV exposure due to the larger bending conformation of DAE parallel (p-)conformer, compared with its extended and noninterlocked analogues possessing switchable FRET-OFF/ON behaviors activated by dual and sequential pH- and photoswitching. Owing to the advantages of 1 O 2 productions tuned by multistimuli inputs (pH, UV, and blue light), an useful logic circuit for toxicity outputs of the surface modified [1]rotaxane nanoparticles (NPs) has been demonstrated to offer promising 1 O 2 productions and managements based on mechanically interlocked molecules for future bioapplications., (© 2022 Wiley-VCH GmbH.)

The self-trapping nano-loop structures of [1]rotaxanes exhibited multiple Förster resonance energy transfer (FRET) patterns via dual and sequential locking/unlocking of pH-gated and UV exposure processes. As a tightened and constrained nano-loop in the acidic condition, dithienylethene (DTE) unit was locked in the highly bending open form to forbid ring closure upon UV irradiation.

Materials capable of displaying strong ratiometric fluorescence with Förster resonance energy transfer (FRET) processes have attracted much research interest because of various chemosensor and biomedical applications. This review highlights several popular strategies in designing FRET-OFF/ON mechanisms of ratiometric fluorescence systems. In particular, the developments of organic and polymeric FRET materials featuring aggregation-induced emission-based luminogens (AIEgens), supramolecular assemblies, photochromic molecular switches and surfactant-induced AIE/FRET mechanisms are presented. AIEgens have been frequently employed as FRET donor and/or acceptor fluorophores to obtain enhanced ratiometric fluorescences in solution and solid states. Since AIE effects and FRET processes rely on controllable distances between fluorophores, many interesting fluorescent properties can be designed by regulating aggregation states in polymers and supramolecular systems. Photo-switchable fluorophores, such as spiropyran and diarylethene, provide drastic changes in fluorescence spectra upon photo-induced isomerizations, leading to photo-switching mechanisms to activate/deactivate FRET processes. Supramolecular assemblies offer versatile platforms to regulate responsive FRET processes effectively. In rotaxane structures, the donor-acceptor distance and FRET efficiency can be tuned by acid/base-controlled shuttling of the macrocycle component. The tunable supramolecular interactions are strongly influenced by external factors (such as pH values, temperatures, analytes, surfactants, UV-visible lights, etc.), which induce the assembly and disassembly of host-guest systems and thus their FRET-ON/FRET-OFF behavior. In addition, the changes in donor or acceptor fluorescence profiles upon detections of analytes can also sufficiently alter the FRET behavior and result in different ratiometric fluorescence outputs. The strategies and examples provided in this review offer the insights and toolkits for future FRET-based material developments., (© 2022. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

The novel multistimuli-responsive monofluorophoric supramolecular polymer Poly(TPE-DBC)/FL-DBA and pseudo[3]rotaxane TPE-DBC/FL-DBA consisted of the closed form of nonemissive fluorescein guest FL-DBA along with TPE-based main-chain macrocyclic polymer Poly(TPE-DBC) and TPE-functionalized macrocycle TPE-DBC hosts, respectively. By the combination of various external stimuli, these fluorescent supramolecular host-guest systems could reveal interesting photoluminescence (PL) properties in DMF/H 2 O (1:1, v/v) solutions, including bifluorophoric host-guest systems after the complexation of Al 3+ ion, i.e., TPE-DBC/FL-DBA-Al 3+ and Poly(TPE-DBC)/FL-DBA-Al 3+ with their corresponding open form of fluorescein guest FL-DBA-Al 3+ . Importantly, the Förster resonance energy transfer (FRET) processes occurred in both bifluorophoric host-guest systems between blue-emissive TPE donors (λ em = 470 nm) and green-emissive fluorescein acceptors (λ em = 527 nm) after aluminum detection, which were further verified by time-resolved photoluminescence (TRPL) measurements to acquire their FRET efficiencies of 40.4 and 31.1%, respectively. Both supramolecular host-guest systems exhibited stronger green fluorescein emissions as well as appealing ratiometric PL behaviors within the desirable donor-acceptor distances of FRET processes in comparison with their detached analogous mixtures. Regarding the pH effects, the optimum green fluorescein emissions with effective FRET processes of all compounds and host-guest systems were sustained in the range pH = 7-10. Interestingly, both host-guest systems TPE-DBC/FL-DBA and Poly(TPE-DBC)/FL-DBA possessed high sensitivities and selectivities toward aluminum ion to display their strong green emissions via FRET-ON behaviors due to the chelation-induced ring opening of spirolactam moieties to become green-emissive guest acceptor FL-DBA-Al 3+ , which offered excellent limit of detection (LOD) values of 50.61 and 38.59 nM, respectively, to be further applied for the fabrication of facile test strips toward aluminum detection. Accordingly, the inventive ratiometric PL and FRET sensor approaches of supramolecular host-guest systems toward aluminum ion with prominent sensitivities and selectivities were well-established in this study.

A novel aggregation-induced emission (AIE) structure containing a tetraphenylethene (TPE) unit covalently linked with a merocyanine (MC) unit was synthesized and investigated in semi-aqueous solutions with 90% water fraction. The open-form structure of red-emissive MC unit combined with TPE unit was utilized as a bi-fluorophoric sensor to detect lead(II) ion, which could be transformed from the close-form structure of non-emissive SP unit upon UV exposure. Moreover, the TPE unit as an energy donor with the blue-green photoluminescence (PL) emission at 480 nm was combined with the MC unit as an energy acceptor with the red PL emission at 635 nm. Due to the Förster resonance energy transfer (FRET) processes, the bi-fluorophoric sensor produced more efficient ratiometric PL behavior to induce a stronger red PL emission than that of the mono-fluorophoric MC unit. Hence, the PL sensor responses of the AIE bi-fluorophoric structure toward lead(II) ion could be further amplified via the FRET-OFF processes to turn off red PL emission of the coordinated MC acceptor and to recover blue-green PL emission of the TPE donor. Accordingly, the best LOD value for the AIE sensor detection toward Pb 2+ was 0.27 μM. The highest red MC emission with the optimum FRET process of AIE sensor could be utilized in cell viability tests to prove the non-toxic and remarkable bio-marker of AIE sensor to detect lead(II) ion in live cells. The developed FRET-OFF processes with ratiometric PL behavior of the bi-fluorophoric AIE sensor can be utilized for future chemo- and bio-sensor applications., Competing Interests: Conflicts of interest There are no conflicts to declare.

A series of novel photo-switchable [2]rotaxanes (i.e., Rot-A-SP and Rot-B-SP before and after shuttling controlled by acid-base, respectively) containing one spiropyran (SP) unit (as a photochromic stopper) on the axle and two tetraphenylethylene (TPE) units on the macrocycle were synthesized via click reaction. Upon UV/visible light exposure, both mono-fluorophoric rotaxanes Rot-A-SP and Rot-B-SP with the closed form (i.e., non-emissive SP unit) could be transformed into the open form (i.e., red-emissive merocyanine (MC) unit) to acquire their respective bi-fluorophoric Rot-A-MC and Rot-B-MC reversibly. The aggregation-induced emission (AIE) properties of bi-fluorophoric TPE combined with MC AIEgens of these designed rotaxanes and mixtures in semi-aqueous solutions induced interesting ratiometric photoluminescence (PL) and Förster resonance energy transfer (FRET) behaviors, which were further investigated and verified by dynamic light scattering (DLS), X-ray diffraction (XRD), and time-resolved photoluminescence (TRPL) measurements along with theoretical studies. Accordingly, in contrast to the model axle ( Axle-MC ) and the analogous mixture ( Mixture-MC , containing the axle and macrocycle components in a 1:1 molar ratio), more efficient FRET behaviors and stronger red PL emissions were obtained from dual-AIEgens between a blue-emissive TPE donor (PL emission at 468 nm) and a red-emissive MC acceptor (PL emission at 668 nm) in both novel photo-switchable [2]rotaxanes Rot-A-MC and Rot-B-MC under various external modulations, including water content, UV/Vis irradiation, pH value, and temperature. Furthermore, the reversible fluorescent photo-patterning applications of Rot-A-SP in a powder form and a solid film with excellent photochromic and fluorescent behaviors are first investigated in this report.

A novel amphiphilic aggregation-induced emission (AIE) copolymer, that is, poly(NIPAM- co -TPE-SP) , consisting of N -isopropylacrylamide (NIPAM) as a hydrophilic unit and a tetraphenylethylene-spiropyran monomer ( TPE-SP ) as a bifluorophoric unit is reported. Upon UV exposure, the close form of non-emissive spiropyran (SP) in poly(NIPAM- co -TPE-SP) can be photo-switched to the open form of emissive merocyanine (MC) in poly(NIPAM- co -TPE-MC) in an aqueous solution, leading to ratiometric fluorescence of AIEgens between green TPE and red MC emissions at 517 and 627 nm, respectively, via Förster resonance energy transfer (FRET). Distinct FRET processes of poly(NIPAM- co -TPE-MC) can be observed under various UV and visible light irradiations, acid-base conditions, thermal treatments, and cyanide ion interactions, which are also confirmed by theoretical studies. The subtle perturbations of environmental factors, such as UV exposure, pH value, temperature, and cyanide ion, can be detected in aqueous media by distinct ratiometric fluorescence changes of the FRET behavior in the amphiphilic poly(NIPAM- co -TPE-MC) . Moreover, the first FRET sensor polymer poly(NIPAM- co -TPE-MC) based on dual AIEgens of TPE and MC units is developed to show a very high selectivity and sensitivity with a low detection limit (LOD = 0.26 μM) toward the cyanide ion in water, which only contain an approximately 1% molar ratio of the bifluorophoric content and can be utilized in cellular bioimaging applications for cyanide detections.