Search

In heparin, some 3- O -sulfated sequences do not meet the structural requirements of the ATIII binding pentasaccharide. These "non-conventional" sequences are the object of this study. In a previous paper (Mourier P. Heparinase digestion of 3- O -sulfated sequences: selective heparinase II digestion for separation and identification of binding sequences present in ATIII affinity fractions of bovine intestine heparins), we demonstrated that unsaturated 3- O -sulfated disaccharides detected in exhaustive heparin digests were specifically cleaved by heparinase I. Consequently, building blocks analyses of heparins using heparinases I+II+III digestion could be compared with experiments where only heparinase II is used. In these latter conditions of depolymerization, the 3- O -sulfated sequences digested into unsaturated 3- O -sulfated disaccharides with heparinases I+II+III, were heparinase II-resistant on their non-reducing side, resulting in longer new building blocks. These properties were used to study the structural neighborhood of these 3- O -sulfated moieties, which have still-undefined biological functions. In this part, heparinases I+II+III and heparinase II digestions of porcine mucosa, bovine mucosa and bovine lung heparins were compared in six fractions of increasing affinity for ATIII. Tagging of building blocks by reductive amination with sulfanilic acid was used. The distribution of 3- O -sulfated building blocks in the ATIII affinity fractions was used to examine the ATIII binding of these sequences., Competing Interests: PM is an employee of Sanofi., (Copyright © 2022 Mourier.)

Binding to antithrombin-III (ATIII) determines the anticoagulant activity of heparin. The complexes formed between heparin and ATIII result from a specific pentasaccharide sequence containing a 3- O- sulfated glucosamine in medium position. Building block analysis of heparins, following heparinase digestion, is a critical method in quality control that provides a simple structural characterization of a complex product. Hence, in these applications, study of the digestion of 3- O -sulfated moieties merits special attention. With heparinase II, specific inhibition of cleavage of the non-reducing bond of 3- O -sulfated units is observed. This specificity was erroneously generalized to other heparinases when it was observed that in exhaustive digests of heparins with the heparinase mixture, resistant 3- O -sulfated tetrasaccharides were also obtained from the specific ATIII-binding pentasaccharides. In fact, the detection of unsaturated 3- O -sulfated disaccharides in digests of heparin by heparinases I+II+III, resulting from the cleavage of the 3- O sulfated unit by heparinase I in non-conventional sequences, shows that this inhibition has exceptions. Thus, in experiments where heparinase II is selectively applied, these sequences can only be digested into tetra- or hexasaccharides where the 3- O -sulfated glucosamine is shifted on the reducing end. Heparinase I+II+III and heparinase II digests with additional tagging by reductive amination with sulfanilic acid were used to study the structural neighborhood of 3- O -sulfated disaccharides in bovine mucosal heparin fractions with increasing affinity for ATIII. The 3- O -sulfated disaccharides detected in heparinase I+II+III digests turn into numerous specific 3- O -sulfated tetrasaccharides in heparinase II digests. Additionally, ATIII-binding pentasaccharides with an extra 3- O -sulfate at the reducing glucosamine are detected in fractions of highest affinity as heparinase II-resistant hexasaccharides with two consecutive 3- O -sulfated units., Competing Interests: PM is an employee of Sanofi Chimie., (Copyright © 2022 Mourier.)

Heparin is a widely-used intravenous anticoagulant comprising a complex mixture of highly-sulfated linear polysaccharides of repeating sequences of uronic acids (either iduronic or glucuronic) 1->4 linked to D-glucosamine with specific sulfation patterns. Preparation of crude heparin from mammalian mucosa involves protease digestion with alcalase under basic conditions (pH ≥ 9) and high temperature (>50°C) and also oxidation. Under such conditions, side reactions including the ubiquitous 2-O desulfation occur on the heparin backbone yielding non-endogenous disaccharides within polysaccharide chains. Whatever the process used for its manufacture, some level of corresponding degradation impurities is therefore expected to be found in heparin and the derived Low Molecular Weight Heparins. These impurities should be monitored to control the quality of the final therapeutic product. Two anion exchange chromatography techniques were used to analyze heparin samples exhaustively or partially depolymerized with heparinases and determine the proportions of non-endogenous disaccharides generated by side reactions during the manufacturing process (epoxides and galacturonic moieties). We also present data from a case study of marketed heparin. Current heparin sodium monographs do not directly address process impurities related to modification of the structure of heparin. Although desulfation reduces the overall biological potency, we found that heparin with an average of one modified disaccharide per chain can still comply with the USP or Ph. Eur. heparin sodium monographs requirements. We have implemented disaccharide analysis to monitor the quality of this product on a risk basis.

The antithrombin (AT) binding properties of heparin and low molecular weight heparins are strongly associated to the presence of the pentasaccharide sequence AGA*IA (A(NAc,6S)-GlcUA-A(NS,3,6S)-I(2S)-A(NS,6S)). By using the highly chemoselective depolymerization to prepare new ultra low molecular weight heparin and coupling it with the original separation techniques, it was possible to isolate a polysaccharide with a biosynthetically unexpected structure and excellent antithrombotic properties. It consisted of a dodecasaccharide containing an unsaturated uronate unit at the nonreducing end and two contiguous AT-binding sequences separated by a nonsulfated iduronate residue. This novel oligosaccharide was characterized by NMR spectroscopy, and its binding with AT was determined by fluorescence titration, NMR, and LC-MS. The dodecasaccharide displayed a significantly increased anti-FXa activity compared with those of the pentasaccharide, fondaparinux, and low molecular weight heparin enoxaparin.

The 3-O-sulfation of N-sulfated glucosamine is the last event in the biosynthesis of heparin/heparan sulfate, giving rise to the antithrombin-binding pentasaccharide sequence AGA*IA, which is largely associated with the antithrombotic activity of these molecules. The aim of the present study was the structural and biochemical characterization of a previously unreported AGA*IA*-containing octasaccharide isolated from the very-low-molecular-mass heparin semuloparin, in which both glucosamine residues of the pentasaccharide moiety located at the non-reducing end bear 3-O-sulfate groups. Two-dimensional and STD (saturation transfer difference) NMR experiments clearly confirmed its structure and identified its ligand epitope binding to antithrombin. The molecular conformation of the octasaccharide-antithrombin complex has been determined by NMR experiments and docking/energy minimization. The presence of the second 3-O-sulfated glucosamine in the octasaccharide induced more than one order of magnitude increase in affinity to antithrombin compared to the pentasaccharide AGA*IA.

Background: The minimal structural requirements of low-molecular-weight heparins that determine the risk of developing heparin-induced thrombocytopenia (HIT) are not fully defined., Objectives: The ability of enoxaparin-derived oligosaccharides (OS) to induce platelet activation and exposure of platelet-factor 4 (PF4) epitopes recognized by antibodies developed in HIT was studied by surface plasmon resonance (SPR) and serotonin release assay., Results: Decasaccharides with ≥ 11 sulfate groups induced platelet activation in the presence of plasma from patients with confirmed HIT. Serotonin release of > 80% without full inhibition at 100 μg mL(-1) was achieved with decasaccharides containing 14 or 15 sulfate groups, 2 dodecasaccharides and 2 tetradecasaccharides. An SPR method was developed using purified PF4 immobilized on carboxymethylated dextran. Antibodies from all HIT samples bound to PF4/heparin in SPR assays with resonance units (RU) ratio of 109-173 with HIT plasma vs. 88-93 with control plasma. RU ratios > 100 were measured when PF4 was pre-incubated with OS with ≥ 10 saccharide units and one octasaccharide containing 10 sulfate groups. RU ratios > 140, similar to those measured when PF4 was pre-incubated with unfractionated heparin or enoxaparin, were obtained with purified dodeca- and tetradecasaccharides. RU values strongly correlated with the number of sulfate groups in the decasaccharides tested (r = 0.93, P = 0.02)., Conclusions: LMWHs with fragments > 10 saccharides and a large number of sulfate groups are more likely to be associated with a higher risk of HIT. These structure-activity relationships were independent of the ability of the OS to bind antithrombin., (© 2012 International Society on Thrombosis and Haemostasis.)

Terminal 1,6-anhydro-aminosugars (1,6-anAS) are typical structural moieties of enoxaparin, a low-molecular-weight heparin (LMWH) widely used for prevention and treatment of thrombotic disorders. In the enoxaparin manufacturing process, these modified amino sugars are formed during the β-eliminative cleavage of heparin. To investigate the effect of terminal anAS on antithrombin (AT) binding and on inhibition of factor Xa (FXa), two octasaccharides containing modified AT-binding pentasaccharide sequences were isolated from enoxaparin. The molecular conformation of the octasaccharides terminating with N-sulfo-1,6-anhydro-D-mannosamine and N-sulfo-1,6-anhydro-D-glucosamine, respectively, has been determined both in the absence and presence of AT by NMR experiments and docking simulations. Reduced overall contacts of the terminal anAS residues with the binding region of AT induce a decrease in affinity for AT as well as lower anti-FXa activity. The anti-FXa measured either in buffer or plasma milieu does not show any significant difference, suggesting that the inhibition of anti-FXa remains specific and biologically relevant.

Background and Objectives: AVE5026 is a novel, hemisynthetic, ultra-low-molecular-weight heparin (ULMWH), which is in clinical development for prevention of venous thromboembolism. Its unique structural features result from the highly selective depolymerization of heparin by the phosphazene base that protects the antithrombin (AT)-binding site from destruction. In the present paper, we describe the chemical and biological characteristics of AVE5026, as well as its effects on experimental thrombosis as compared to those of the low-molecular-weight heparin (LMWH) enoxaparin after a single subcutaneous (s.c.) administration in certain animal models., Method and Results: AVE5026 has a higher anti-factor Xa (anti-FXa) activity (approximately 160 U mg(-1)) along with a catalytic anti-thrombin (anti-FIIa) activity (approximately 2 U mg(-1)) as a result of its structure being strongly enriched in specific AT-binding oligosaccharides. In human plasma, potent inhibition of thrombin generation by AVE5026 was closely related to its anti-FXa activity. In a rat venous thrombosis model, AVE5026 showed a dose-dependent antithrombotic activity comparable to that of enoxaparin (ED50-AVE5026 = 1.6 mg kg(-1), ED50-enoxaparin = 2.8 mg kg(-1)). Interestingly, non-occlusive venous thrombosis in rabbits was inhibited by an ED50 of 0.1 mg kg(-1) AVE5026, whereas 0.316 mg kg(-1) enoxaparin was not active. In a canine model, similarly to enoxaparin (ED50 = 1.3 mg kg(-1)), AVE5026 dose-dependently inhibited arterial thrombosis (ED50 = 2.0 mg kg(-1)). At equipotent doses, AVE5026 did not affect bleeding parameters, whereas enoxaparin showed increased hemorrhage in rats, rabbits and dogs., Conclusion: These unique structural attributes distinguish AVE5026 from the LMWH class. Based on these data in well-established arterial and venous thrombosis models, AVE5026 could represent a valuable alternative in thrombosis prevention with an improved benefit-risk profile as compared to that of enoxaparin.

The antithrombotic activity of low molecular weight heparins (LMWHs) is largely associated with the antithrombin (AT)-binding pentasaccharide sequence AGA(*)IA (GlcN(NAc/NS,6S)-GlcA-GlcN(NS,3,6S)-IdoUA(2S)-GlcN(NS,6S)). The location of the AGA(*)IA sequences along the LMWH chains is also expected to influence binding to AT. This study was aimed at investigating the role of the structure and molecular conformation of different disaccharide extensions on both sides of the AGA(*)IA sequence in modulating the affinity for AT. Four high purity octasaccharides isolated by size exclusion chromatography, high pressure liquid chromatography, and AT-affinity chromatography from the LMWH enoxaparin were selected for the study. All the four octasaccharides terminate at their nonreducing end with 4,5-unsaturated uronic acid residues (DeltaU). In two octasaccharides, AGA(*)IA was elongated at the reducing end by units IdoUA(2S)-GlcN(NS,6S) (OCTA-1) or IdoUA-GlcN(NAc,6S) (OCTA-2). In the other two octasaccharides (OCTA-3 and OCTA-4), AGA(*)IA was elongated at the nonreducing side by units GlcN(NS,6S)-IdoUA and GlcN(NS,6S)-GlcA, respectively. Extensions increased the affinity for AT of octasaccharides with respect to pentasaccharide AGA(*)IA, as also confirmed by fluorescence titration. Two-dimensional NMR and docking studies clearly indicated that, although elongation of the AGA(*)IA sequence does not substantially modify the bound conformation of the AGA(*)IA segment, extensions promote additional contacts with the protein. It should be noted that, as not previously reported, the unusual GlcA residue that precedes the AGA(*)IA sequence in OCTA-4 induced an unexpected 1 order of magnitude increase in the affinity to AT with respect to its IdoUA-containing homolog OCTA-3. Such a residue was found to orientate its two hydroxyl groups at close distance to residues of the protein. Besides the well established ionic interactions, nonionic interactions may thus contribute to strengthen oligosaccharide-AT complexes.

The present study deals with the conformation in solution of two heparin octasaccharides containing the pentasaccharide sequence GlcN(NAc,6S)-GlcA-GlcN(NS,3,6S)-IdoA(2S)-GlcN(NS,6S) [AGA*IA; where GlcN(NAc,6S) is N-acetylated, 6-O-sulfated alpha-D-glucosamine, GlcN(NS,3,6S) is N,3,6-O-trisulfated alpha-D-glucosamine and IdoA(2S) is 2-O-sulfated IdoA (alpha-L-iduronic acid)] located at different positions in the heparin chain and focuses on establishing geometries of IdoA residues (IdoA(2S) and IdoA) both inside and outside the AGA*IA sequence. AGA*IA constitutes the active site for AT (antithrombin) and is essential for the expression of high anticoagulant and antithrombotic activities. Analysis of NMR parameters [NOEs (nuclear Overhauser effects), transferred NOEs and coupling constants] for the two octasaccharides indicated that between the 1C4 and 2S0 conformations present in dynamic equilibrium in the free state for the IdoA(2S) residue within AGA*IA, AT selects the 2S0 form, as previously shown [Hricovini, Guerrini, Bisio, Torri, Petitou and Casu (2001) Biochem. J. 359, 265-272]. Notably, the 2S0 conformation is also adopted by the non-sulfated IdoA residue preceding AGA*IA that, in the absence of AT, adopts predominantly the 1C4 form. These results further support the concept that heparin-binding proteins influence the conformational equilibrium of iduronic acid residues that are directly or indirectly involved in binding and select one of their equi-energetic conformations for best fitting in the complex. The complete reversal of an iduronic acid conformation preferred in the free state is also demonstrated for the first time. Preliminary docking studies provided information on the octasaccharide binding location agreeing most closely with the experimental data. These results suggest a possible biological role for the non-sulfated IdoA residue preceding AGA*IA, previously thought not to influence the AT-binding properties of the pentasaccharide. Thus, for each AT binding sequence longer than AGA*IA, the interactions with the protein could differ and give to each heparin fragment a specific biological response.

A major metabolic pathway of spiramycins in pig liver is described. This biochemical reaction involves L-cysteine--a common amino acid present in most animal tissues--which reacts with the aldehyde function of the antibiotic forming a thiazolidine ring. This transformation of spiramycin derivatives drastically increased their polarity. A preliminary HPLC method enabling the quantitation of each metabolite in the range 0.5 microg/g of liver tissue is proposed. Spiramycin S is used as an internal standard while extraction procedures take into account the physico-chemical properties of the thiazolidine moieties. By comparison, previous HPLC methods underestimated the exact amount of antibiotic residues because these metabolites were not extracted from the studied tissues.

A reversed-phase, ion-pair high-performance liquid chromatographic (HPLC) method for the determination of gallamine and its impurities is described. The separation is achieved on a Nucleosil C18 column with acetonitrile-aqueous phosphate buffer (pH 3.0) (31:69, v/v) containing 0.1 M sodium perchlorate as eluent and on-line UV detection at 200 nm. The method is sensitive (the detection limit is 0.7 ng injected) and reproducible, with a peak area coefficient of variation of 0.19% (n = 15; 3 micrograms injected) and 1.65% (n = 15; 10 ng injected) for a gallamine assay; the detector response is linear over the concentration range 0.5-250 micrograms/ml of gallamine triethiodide with a correlation coefficient of 0.9997. The method has been used to isolate the two main impurities contained in gallamine triethiodide batches; their structures have been determined by NMR and fast atom bombardment mass spectrometry. Various gallamine triethiodide batches have been analysed and the HPLC results compared with those obtained by thin-layer chromatography.