Search

Sandblasting is a standard procedure used for treating dental implant (DI) surfaces to enhance the osseointegration with known clinical success. This clinical study aimed to evaluate the long-term clinical outcomes of DIs with external hexagon connections and a surface sandblasted with calcium phosphate. Two hundred and seventy-five Mg-osseous™ (Mozo-Grau™) screw DIs were placed in 86 patients using a two-stage surgical technique and conventional loading protocol (at three months). Dental implants and prosthetic clinical findings were evaluated during a 17-year follow up. Four DIs were lost during the healing period, and 108 prostheses were placed over the 271 DIs left: 58 unitary implant-supported prosthesis (ISP), 31 partially ISP, 14 full-arch ISP, and five overdentures. Fourteen DIs were lost during the follow-up period. Clinical results indicated a DI survival rate of 93.50%. A total of 11.80% of DIs showed peri-implantitis as the primary biological complication. The mean (SD) marginal bone loss was 1.78 (0.40) mm, ranging from 0.90 to 2.80 mm. The most frequent complication was mechanical prosthodontic complications (24.40%). Sandblasted surface DIs inserted in both maxillary and mandibular areas produce favourable long-term (17-year follow up) outcomes and stable tissue conditions when a delayed loading protocol is followed., (Copyright © 2023 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.)

Introduction: One of the main problems for the long-term behavior of dental implants are loosening of the implant-abutment connection screws and bacterial infiltration. The aim of this work is to increase the screw fixation by silver coating, providing superior mechanical retaining and antibacterial effect. Methods: Eighty dental implants with their abutments and screws have been studied. Twenty screws were not coated and were used as a control while the rest of screws were silver coated by sputtering, with three different thickness: 10, 20 and 40 μm and 20 screws per each thickness. Coating morphology and thickness were determined by scanning electron microscopy using image analysis systems. The screws were tightened for each of the thicknesses and the control with two torques 15 Ncm and 20 Ncm and tested under mechanical fatigue simulating oral stresses up to a maximum of 500,000 cycles. The remaining torques at different cycles were determined with a high-sensitivity torquemeter. Cell viability assays were performed with SaOs-2 osteoblasts and microbiological studies were performed against Streptococcus gordonii and Enterococcus faecalis bacteria strains, determining their metabolic activity and viability using live/dead staining. Results: It was observed a decrease in torque as cycles increase. For a preload of 15 Ncm at 100,000 cycles, the loosening was complete and, for 20 Ncm at 500,000 cycles, 85% of torque was lost. The silver coatings retained the torque, especially the one with a thickness of 40 μm, retaining 90% of the initial torque at 500,000 cycles. It was observed that osteoblastic viability values did not reach 70%, which could indicate a slight cytotoxic effect in contact with cells or tissues; however, the screw should not be in direct contact with tissue or living cells. Silver coating induced a significant reduction of the bacteria metabolic activity for Streptococcus gordonii and Enterococcus faecalis , around 90% and 85% respectively. Discussion: Therefore, this coating may be of interest to prevent loosening of implant systems with a worthy antibacterial response., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest. The author(s) declared that they were an editorial board member of Frontiers, at the time of submission. This had no impact on the peer review process and the final decision., (Copyright © 2024 Velasco-Ortega, Jiménez-Guerra, Ortiz-Garcia, Nuñez-Márquez, Moreno-Muñoz, Gil, Delgado, Rondón-Romero and Monsalve-Guil.)

Background: This study aimed to report the outcomes of the immediate loading of implants with fixed rehabilitations in edentulous geriatric patients., Methods: Edentulous geriatric patients were diagnosed with an oral examination, radiographic evaluation, and intermaxillary relations and treated with fixed rehabilitation over several implants. After immediate surgery, the implants were immediately loaded with a fully fixed prosthesis., Results: Twenty-four patients (20 females and 4 males) were treated using a total 210 implants. All patients (100%) had a previous history of periodontitis. Eleven patients (45.8%) were smokers. Eleven patients (45.8%) suffered from chronic medical diseases (i.e., diabetes, cardiovascular diseases). The study's clinical follow-up period extended for three years, during which thirty-three fixed prostheses were installed over the implants in 24 patients. The average marginal bone loss measured was 1.33 ± 0.17 mm. The success rate of the implants and prosthodontics being placed in this study yielded 98.5% and 97%, respectively. One patient (4.2%) showed some kind of technical complications. Eleven patients (45.8%) showed mucositis, and 25 implants (11.9%) in 10 patients (41.7%) were associated with peri-implantitis., Conclusions: This study shows that the treatment of edentulous geriatric patients by immediate loading of implants with fixed rehabilitations is a clinically successful protocol but with a high prevalence of peri-implant diseases.

Background : This study aims to show the clinical outcomes of implants supporting mandibular overdentures in edentulous patients. Methods : Mandibular edentulous patients were diagnosed with an oral examination, panoramic radiograph, and diagnostic casts for intermaxillary relations and treated with overdentures over two implants. After two-stage surgery, implants were early loaded with an overdenture at 6 weeks. Results: Fifty-four patients (28 females and 24 males) were treated with 108 implants. Thirty-two patients (59.2%) had a previous history of periodontitis. Twenty-three patients (46%) were smokers. Forty patients (74.1%) suffered from systemic diseases (i.e., diabetes, cardiovascular diseases). The clinical follow-up of the study was 147.8 ± 10.4 months. The clinical outcomes showed a global success of 94.5% of implants. Fifty-four overdentures were placed in the patients over the implants. The mean marginal bone loss was 1.12 ± 0.34 mm. Nineteen patients (35.2%) showed some kind of mechanical prosthodontic complication. Sixteen implants (14.8%) were associated with peri-implantitis. Conclusions: Based on the clinical results obtained, we can determine that the treatment of elderly edentulous patients with mandibular overdentures through the early loading of two placed implants is a successful implant protocol.

At the beginning of the COVID-19 pandemic, strict measures of confinement and social distancing were taken. Dentists were considered essential personnel and their activity was restricted to emergency treatment. The present observational study aims to determine the situation of oral implantology practice in Spain during the initial period of the COVID-19 pandemic. This is a cross-sectional observational study based on the STROBE (Strengthening the Reporting of Observational Studies in Epidemiology) guidelines. An electronic survey consisting of three blocks of questions was sent to all members of the Spanish Society of Implants. The data were analyzed using descriptive analysis. A total of 237 participants (14.3%) responded to the questionnaire. The majority of participants (60.8%) only attended emergencies during the first 9 months of the pandemic. Despite this, 77.2% reported having performed dental implant surgeries and 75.5% indicated that they performed non-essential treatments. The activity was fully recovered by 64.1% of the surveyed dentists. The majority of dentists (90.7%) considered that sufficient/adequate preventive measures were carried out at their workplace, which possibly contributed to the fact that 49.3% were not afraid of becoming infected. This concern was significantly and directly proportionally associated with the age of the surveyed dentists. The oral implant practice was affected to a greater extent during the first 9 months of the pandemic, especially in urban areas, with a greater impact on the workload of professionals with less specialised training in oral implantology.

(1) Background. The immediate functional loading of implants is a clinical procedure used for treating periodontal edentulous patients. This clinical study aimed to evaluate the clinical outcomes of the immediate functional loading of implants with fully fixed rehabilitations in compromised periodontal patients. (2) Methods. Three hundred and five implants IPX screw implants were placed in 27 periodontal patients using an immediate functional loading protocol with fixed rehabilitations. All patients had a previous history of periodontitis, four patients (14.8%) were smokers and seven patients (25.9%) suffered from chronic medical conditions. (3) Results. Implant and prosthetic clinical findings were evaluated during a mean period of 41.3 ± 19.6 months. No implants were lost during the clinical follow-up. The cumulative survival rate for all implants was 100%. Regarding the prostheses designed, a total of 54 fixed prostheses were placed in the 27 patients immediately after the surgery. Forty-four hybrid fixed prostheses (81.5%) and 10 fixed rehabilitations (18.5%) were placed in the patients. The mean marginal bone loss was 1.51 ± 1.16 mm, ranging from 0 to 3.5 mm during the follow-up evaluation. Thirty-one implants (10.2%) in 10 patients (37%) were associated with peri-implantitis. Five patients (18.5%) showed some kind of technical complications (loss/fracture of the prosthetic screw, acrylic resin fracture, ceramic chipping). (4) Conclusions. The clinical outcomes of this study demonstrate that fixed rehabilitation by immediate functional loading of implants is considered a predictable procedure.

Implant dental therapy is a clinical procedure used for treating patients with tooth loss with known clinical success. This clinical study aimed to evaluate the long-term clinical outcomes of dental implants in partially and totally edentulous patients. A total of 544 Microdent (Microdent SU, Implant Microdent System®, Santa Eulàlia de Ronçana Barcelona, Spain) screw implants were placed in 111 patients using a two-stage surgical technique and a conventional loading protocol (lasting 3 months). Implant and prosthetic clinical findings were evaluated during a 15-year follow-up. A total of 6 implants were lost during the healing period, and 124 prostheses were placed over the 538 implants that remained: 20 single crowns, 52 partially fixed bridges, 45 full-arch fixed restorations, and 7 overdentures. A total of 20 of these were lost during the follow-up period. The cumulative survival rate for all implants was 96.4%. The data underwent statistical analysis (significance level: p < 0.05). The mean marginal bone loss was 1.82 ± 0.54 mm, ranging from 1.2 to 3.1 mm. The most frequent complications were mechanical prosthodontic complications (16.2%). In all, 11.8% of implants showed periimplantitis as the primary biological complication. Dental implants inserted in both the maxillary and mandibular areas produce long-term favorable outcomes and stable tissue conditions when a delayed loading protocol is followed.

Current patterns of preventive antibiotic prescribing are encouraging the spread of antimicrobial resistance. Recently, the Spanish Society of Implants (SEI) developed the first clinical practice guidelines published to date, providing clear guidelines on how to prescribe responsible and informed preventive antibiotic therapy (PAT) based on the available scientific evidence on dental implant treatments (DIs). The present document aims to summarise and disseminate the recommendations established by this expert panel. These were based on the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. Studies were analysed using the Scottish Intercollegiate Guidelines Network (SIGN) checklist templates and ranked according to their level of evidence. They were then assigned a level of recommendation using the Grading of Recommendations, Assessment, Development and Evaluation system (GRADE). Guidelines were established on the type of PAT, antibiotic and dosage of administration in the placement of DIs without anatomical constraints, in bone augmentation with the placement of DIs in one or two stages, placement of immediate DIs, sinus elevations, implant prosthetic phase, as well as recommendations in patients allergic to penicillin. Therefore, the PAT must be adapted to the type of implant procedure to be performed.

Immediate implants present a high risk of early failure. To avoid this, preventive antibiotics (PAs) are prescribed; however, their inappropriate administration leads to antimicrobial resistance. The present study aims to clarify whether the prescription of PAs reduces the rate of early failure of immediate implants and to establish guidelines to avoid the overprescription of these drugs. An electronic search of the MEDLINE database (via PubMed), Web of Science, Scopus, LILACS and OpenGrey was carried out. The criteria described in the PRISMA ® statement were used. The search was temporarily restricted from 2010 to 2021. The risk of bias was analysed using the SIGN Methodological Assessment Checklist for Systematic Reviews and Meta-Analyses and the JBI Prevalence Critical Appraisal Tool. After searching, eight studies were included that met the established criteria. With the limitations of this study, it can be stated that antibiotic prescription in immediate implants reduces the early failure rate. Preoperative administration of 2-3 g amoxicillin one hour before surgery followed by 500 mg/8 h for five to seven days is recommended. It is considered prudent to avoid the use of clindamycin in favour of azithromycin, clarithromycin or metronidazole in penicillin allergy patients until further studies are conducted.

Introduction: This study aimed to show the clinical outcomes of implants inserted by guided surgery supporting mandibular overdentures in edentulous patients., Patients and Methods: Mandibular edentulous patients were diagnosed with an oral examination, cone-beam computerized tomography, and diagnostic casts for intermaxillary relations and treated with overdentures over two implants by guided surgery. After flapless surgery, implants were early loaded with an overdenture at 6 weeks., Results and Discussion: Fourteen patients (nine females and five males) were treated with 28 implants. Four patients (28.6%) had a previous history of periodontitis. Five patients (35.7%) were smokers. Nine patients (64.3%) suffered from systemic diseases (i.e., diabetes, cardiovascular diseases). The clinical follow-up of the study was 44.7 ± 31.4 months. Clinical outcomes showed a global success of 100% of implants. Fourteen overdentures were placed in the patients over the implants. Mean marginal bone loss was 1.25 mm ± 0.95 mm. Four patients (28.6%) showed some kind of mechanical prosthodontic complications. Six implants (21.4%) were associated with peri-implantitis., Conclusions: This study indicates that treatment of mandibular edentulous patients with overdentures by guided surgery and early loading of implants placed appears to be a successful implant protocol.

The prescription of preventive antibiotics in dental implant treatments reduces the incidence of early failures. This study has focused mainly on the influence of amoxicillin, which is contraindicated in penicillin-allergic patients. The present systematic review aimed to determine whether penicillin-allergic patients have a higher risk of implant failure compared to non-allergic patients. An electronic search was performed on Medline and Web of Science using the following MeSH terms: (penicillin allergy OR clindamycin OR erythromycin OR azithromycin OR metronidazole) AND (dental implant OR dental implant failure OR dental implant complications). The criteria employed were those described in the PRISMA ® Declaration. Only five articles were included that analyzed the failure rates of implants placed in penicillin-allergic patients who were prescribed clindamycin compared to non-allergic patients who were prescribed amoxicillin. With the limitations of this study, it is not possible to state that penicillin allergy per se constitutes a risk factor for early dental implant failure as most of the studies included self-reported allergic patients. Clindamycin has been associated with a significantly elevated risk of failure and an up to six times increased risk of infection. Immediate implants also have a 5.7 to 10 times higher risk of failure.

Introduction: The aim of this study was to show the long-term clinical outcomes of implants placed in maxillary sinus floor augmentation (MFSA) using beta-tricalcium phosphate (β-TCP)., Patients and Methods: Maxillary patients were diagnosed for MFSA and used beta- β-TCP. After the lateral sinus surgery, implants were loaded at 6 months with restorations. The clinical follow-up was at 10 years., Results: One hundred and one patients (58 females and 43 males) were treated with MFSA. Twenty-nine patients (28.7%) had a history of periodontitis. Thirty-three patients (32.7%) were smokers. One hundred and twenty-one MFSA, 81 unilateral and 20 bilateral sites, with 234 implants were performed. The average vertical bone height available was 4.92 ± 1.83 mm. The average vertical bone gain obtained was 6.95 ± 2.19 mm following MFSA. The implant cumulative survival rate was 97.2%. Three implants (1.3%) were lost during the healing period. Six implants (2.6%) were lost by peri-implantitis. One hundred and fifteen restorations were placed in the patients. Mean marginal bone loss was 1.93 mm ± 1.03 mm. Six patients (27.3%) showed technical complications. Thirty-six implants (15.3%) in 14 patients (13.9%) were associated with peri-implantitis., Conclusions: This study indicates that treatment with implant-supported restoration by MFSA using β-TCP constitutes a successful implant approach.

Titanium surface is an important factor in achieving osseointegration during the early wound healing of dental implants in alveolar bone. The purpose of this study was to evaluate sandblasted-etched surface implants to investigate the osseointegration. In the present study, we used two different types of sandblasted-etched surface implants, an SLA™ surface and a Nanoblast Plus™ surface. Roughness and chemical composition were evaluated by a white light interferometer microscope and X-ray photoelectron spectroscopy, respectively. The SLA™ surface exhibited the higher values (Ra 3.05 μm) of rugosity compared to the Nanoblast Plus™ surface (Ra 1.78 μm). Both types of implants were inserted in the femoral condyles of ten New Zealand white rabbits. After 12 weeks, histological and histomorphometric analysis was performed. All the implants were osseointegrated and no signs of infection were observed. Histomorphometric analysis revealed that the bone-implant contact % (BIC) ratio was similar around the SLA™ implants (63.74 ± 13.61) than around the Nanoblast Plus™ implants (62.83 ± 9.91). Both implant surfaces demonstrated a favorable bone response, confirming the relevance of the sandblasted-etched surface on implant osseointegration.

The aim of this study was to show the clinical outcomes of the immediate loading of implants inserted by guided surgery in edentulous mandible patients. Edentulous mandible patients were diagnosed with oral examination, cone beam computerized tomography and diagnostic casts for intermaxillary relations and treated with 8-10 implants for rehabilitation with guided surgery and immediate loading. After flapless surgery, implants were loaded with an immediate acrylic temporary prosthesis. After a period of six months, a ceramic definitive full-arch prosthesis was placed. A total of 22 patients (12 females and 10 males) were treated with 198 implants. Eleven patients (50%) had a previous history of periodontitis. Six patients (27.3%) were smokers. The follow-up was 84.2 ± 4.9 months. Clinical outcomes showed a global success rate of 97.5% of implants. Five implants were lost during the healing phase with provisional prosthesis. Twenty-two fixed full-arch rehabilitations were placed in the patients over the 193 remaining implants. Mean marginal bone loss was 1.44 mm ± 0.45 mm. Six patients (27.3%) showed some kind of mechanical prosthodontic complication. Eighteen (9.3%) of the 193 remaining implants were associated with peri-implantitis. The antecedents of peri-implantitis are critical elements for the survival of the implants. The loss of implants was significant in patients who smoked up to 10 cigarettes, compared to non-smokers. Peri-implantitis is one of the key elements in the long-term follow-up of implants and it was more manifest in smoking patients, and in those with a history of peri-implantitis. Marginal bone loss was more significant in smokers. Full-arch rehabilitation is presented as a predictable alternative with minor fatigue problems that are easily solvable.

This study focuses on the fatigue behavior and bone-implant attachment for the more usual surfaces of the different CP-titanium dental implants. The implants studied were: as-received (CTR), acid etching (AE), spark-anodization (SA), and with a grit-blasted surface (GB). Residual stresses were determined by means of X-ray diffraction. The fatigue tests were carried out at 37°C on 160 dental implants, and the stress-failure (S-N) curve was determined. The fatigue tests showed that the grit-blasting process improved fatigue life. This is a consequence of the layer of compressive residual stresses that the treatment generates in titanium surfaces. Further, our aim was to assess and compare the short- and midterm bone regenerative potential and mechanical retention of the implants in bone of New Zealand rabbits. The mechanical retention after 4 and 10 weeks of implantation was evaluated with histometric and pull-out tests, respectively, as a measure of the osseointegration of the implants. The results demonstrated that the GB treatment produced microrough that accelerated bone tissue regeneration and increased mechanical retention in the bone bed at short periods of implantation in comparison with all other implants tested. The GB surface produced an improvement in mechanical long-time behavior and improved bone growth. These types of treated implants can have great potential in clinical applications, as evidenced by the outcomes of the current study.