Search

Developing efficient antibacterial nanomaterials has potential across diverse fields, but it requires a deeper understanding of material-bacteria interactions. In this study, a novel 2D core-shell MoAlB@MBene structure is synthesized using a mild wet-chemical etching approach. The growth of E. coli, S. aureus, and B. subtilis bacteria in the presence of MoAlB@MBene decreased in a concentration-dependent manner, with a prolonged lag phase in the initial 6 h of incubation. Even under dark conditions, MoAlB@MBene triggered the formation of intercellular reactive oxygen species (ROS) and singlet oxygen ( 1 O 2 ) in bacteria, while the bacteria protected themselves by forming biofilm and altering cell morphology. The MoAlB@MBene shows consistent light absorption across the visible range, along with a distinctive UV absorption edge. Two types of band gaps are identified: direct (1.67 eV) and indirect (0.74 eV), which facilitate complex light interactions with MoAlB@MBene. Exposure to simulated white light led to decreased viability rates of E. coli (20.6%), S. aureus (22.9%), and B. subtilis (21.4%). Altogether, the presented study enhances the understanding of bacteria responses in the presence of light-activated 2D nanomaterials., (© 2024 Wiley‐VCH GmbH.)

A novel Mn-Fe dual metal-organic framework (Mn-Fe-BTC DMOF) was synthesized via a one-step hydrothermal method and employed as a cathode material in lithium metal batteries. The Mn-Fe-BTC DMOF exhibited a high initial capacity (1385 mA h g -1 ) and after 100 cycles (687 mA h g -1 ), demonstrating its potential for high-performance energy storage devices., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Anthraquinone-based hollow COFs were synthesized via a template-assisted method involving polystyrene nanospheres as the hard template, which enabled doubling the specific capacitance and energy density compared to non-templated COFs. Our approach can be extended to other COFs, offering a promising strategy for enhancing the performance of COF-based electrodes in energy storage applications.

Zinc-ion batteries (ZIBs) are promising energy storage systems due to high energy density, low-cost, and abundant availability of zinc as a raw material. However, the greatest challenge in ZIBs research is lack of suitable cathode materials that can reversibly intercalate Zn 2+ ions. 2D layered materials, especially MoS 2 -based, attract tremendous interest due to large surface area and ability to intercalate/deintercalate ions. Unfortunately, pristine MoS 2 obtained by traditional protocols such as chemical exfoliation or hydrothermal/solvothermal methods exhibits limited electronic conductivity and poor chemical stability upon charge/discharge cycling. Here, a novel molecular strategy to boost the electrochemical performance of MoS 2 cathode materials for aqueous ZIBs is reported. The use of dithiolated conjugated molecular pillars, that is, 4,4'-biphenyldithiols, enables to heal defects and crosslink the MoS 2 nanosheets, yielding covalently bridged networks (MoS 2 -SH2) with improved ionic and electronic conductivity and electrochemical performance. In particular, MoS 2 -SH2 electrodes display high specific capacity of 271.3 mAh g -1 at 0.1 A g -1 , high energy density of 279 Wh kg -1 , and high power density of 12.3 kW kg -1 . With its outstanding rate capability (capacity of 148.1 mAh g -1 at 10 A g -1 ) and stability (capacity of 179 mAh g -1 after 1000 cycles), MoS 2 -SH2 electrodes outperform other MoS 2 -based electrodes in ZIBs., (© 2024 The Authors. Small published by Wiley‐VCH GmbH.)

The artificial brain is conceived as advanced intelligence technology, capable to emulate in-memory processes occurring in the human brain by integrating synaptic devices. Within this context, improving the functionality of synaptic transistors to increase information processing density in neuromorphic chips is a major challenge in this field. In this article, Li-ion migration promoting long afterglow organic light-emitting transistors, which display exceptional postsynaptic brightness of 7000 cd m -2 under low operational voltages of 10 V is presented. The postsynaptic current of 0.1 mA operating as a built-in threshold switch is implemented as a firing point in these devices. The setting-condition-triggered long afterglow is employed to drive the photoisomerization process of photochromic molecules that mimic neurotransmitter transfer in the human brain for realizing a key memory rule, that is, the transition from long-term memory to permanent memory. The combination of setting-condition-triggered long afterglow with photodiode amplifiers is also processed to emulate the human responding action after the setting-training process. Overall, the successful integration in neuromorphic computing comprising stimulus judgment, photon emission, transition, and encoding,  to emulate the complicated decision tree of the human brain is demonstrated., (© 2024 The Authors. Advanced Materials published by Wiley‐VCH GmbH.)

Zinc hybrid supercapacitors (Zn-HSCs) hold immense potential toward the next-generation energy storage systems, effectively spanning the divide between conventional lithium-ion batteries (LIBs) and supercapacitors. Unfortunately, the energy density of most of Zn-HSCs has not yet rivalled the levels observed in LIBs. The electrochemical performance of aqueous Zn-HSCs can be enhanced through the chemical functionalization of graphene-based cathode materials with thiol moieties as they will be highly suitable for favoring Zn 2+ adsorption/desorption. Here, a single-step reaction is employed to synthesize thiol-functionalized reduced graphene oxide (rGOSH), incorporating both oxygen functional groups (OFGs) and thiol functionalities, as demonstrated by X-ray photoelectron spectroscopy (XPS) studies. Electrochemical analysis reveals that rGOSH cathodes exhibit a specific capacitance (540 F g -1 ) and specific capacity (139 mAh g -1 ) at 0.1 A g -1 as well as long-term stability, with over 92% capacitance retention after 10 000 cycles, outperforming chemically reduced graphene oxide (CrGO). Notably, rGOSH electrodes displayed an exceptional maximum energy density of 187.6 Wh kg -1 and power density of 48.6 kW kg -1 . Overall, this study offers an unprecedented powerful strategy for the design and optimization of cathode materials, paving the way for efficient and sustainable energy storage solutions to meet the increasing demands of modern energy applications., (© 2024 The Authors. Advanced Science published by Wiley‐VCH GmbH.)

We report on the synthesis of "clickable" graphene nanoribbons (GNRs) and their application as a versatile interface for electrochemical biosensors. GNRs are successfully deposited on gold-coated working electrodes and serve as a platform for the covalent anchoring of a bioreceptor ( i.e. , a DNA aptamer), enabling selective and sensitive detection of Interleukin 6 (IL6). Moreover, when applied as the intermediate linker on reduced graphene oxide (rGO)-based field-effect transistors (FETs), the GNRs provide improved robustness compared to conventional aromatic bi-functional linker molecules. GNRs enable an orthogonal and covalent attachment of a recognition unit with a considerably higher probe density than previously established methods. Interestingly, we demonstrate that GNRs introduce photoluminescence (PL) when applied to rGO-based FETs, paving the way toward the simultaneous optical and electronic probing of the attached biointerface.

Precise monitoring of the humidity level is important for the living comfort and for many applications in various industrial sectors. Humidity sensors have thus become one among the most extensively studied and used chemical sensors by targeting a maximal device performance through the optimization of the components and working mechanism. Among different moisture-sensitive systems, supramolecular nanostructures are ideal active materials for the next generation of highly efficient humidity sensors. Their noncovalent nature guarantees fast response, high reversibility, and fast recovery time in the sensing event. Herein, the most enlightening recent strategies on the use of supramolecular nanostructures for humidity sensing are showcased. The key performance indicators in humidity sensing, including operation range, sensitivity, selectivity, response, and recovery speed are discussed as milestones for true practical applications. Some of the most remarkable examples of supramolecular-based humidity sensors are presented, by describing the finest sensing materials, the operating principles, and sensing mechanisms, the latter being based on the structural or charge-transport changes triggered by the interaction of the supramolecular nanostructures with the ambient humidity. Finally, the future directions, challenges, and opportunities for the development of humidity sensors with performance beyond the state of the art are discussed., (© 2023 The Authors. Advanced Materials published by Wiley‐VCH GmbH.)

Core-shell MOF@COF hybrids were synthesized via subsequent modification of MOF UiO-66-NH 2 with 1,3,5-triformylphloroglucinol (TFP) and 2,3,5,6-tetraaminobenzoquinone (TABQ). The hybrids exhibited significant surface area (236 m 2 g -1 ) and outstanding electrochemical performance (103 F g -1 at 0.5 A g -1 ), surpassing both COFs and MOFs, thereby showcasing the potential of on-surface condensation reactions for developing high-performance energy storage devices.

The coupling of different 2D materials (2DMs) to form van der Waals heterostructures (vdWHs) is a powerful strategy for adjusting the electronic properties of 2D semiconductors, for applications in opto-electronics and quantum computing. 2D molybdenum disulfide (MoS 2 ) represents an archetypical semiconducting, monolayer thick versatile platform for the generation of hybrid vdWH with tunable charge transport characteristics through its interfacing with molecules and assemblies thereof. However, the physisorption of (macro)molecules on 2D MoS 2 yields hybrids possessing a limited thermal stability, thereby jeopardizing their technological applications. Herein, the rational design and optimized synthesis of 2D covalent organic frameworks (2D-COFs) for the generation of MoS 2 /2D-COF vdWHs exhibiting strong interlayer coupling effects are reported. The high crystallinity of the 2D-COF films makes it possible to engineer an ultrastable periodic doping effect on MoS 2 , boosting devices' field-effect mobility at room temperature. Such a performance increase can be attributed to the synergistic effect of the efficient interfacial electron transfer process and the pronounced suppression of MoS 2 's lattice vibration. This proof-of-concept work validates an unprecedented approach for the efficient modulation of the electronic properties of 2D transition metal dichalcogenides toward high-performance (opto)electronics for CMOS digital circuits., (© 2023 The Authors. Advanced Materials published by Wiley-VCH GmbH.)

The presence of oxygen-containing functional groups on the basal plane and at the edges endows graphene oxide (GO) with an insulating nature, which makes it rather unsuitable for electronic applications. Fortunately, the reduction process makes it possible to restore the sp 2 conjugation. Among various protocols, chemical reduction is appealing because of its compatibility with large-scale production. Nevertheless, despite the vast number of reported chemical protocols, their comparative assessment has not yet been the subject of an in-depth investigation, rendering the establishment of a structure-performance relationship impossible. We report a systematic study on the chemical reduction of GO by exploring different reducing agents (hydrazine hydrate, sodium borohydride, ascorbic acid (AA), and sodium dithionite) and reaction times (2 or 12 hours) in order to boost the performance of chemically reduced GO (CrGO) in electronics and in electrochemical applications. In this work, we provide evidence that the optimal reduction conditions should vary depending on the chosen application, whether it is for electrical or electrochemical purposes. CrGO exhibiting a good electrical conductivity (>1800 S m -1 ) can be obtained by using AA (12 hours of reaction), Na 2 S 2 O 4 and N 2 H 4 (independent of the reaction time). Conversely, CrGO displaying a superior electrochemical performance (specific capacitance of 211 F g -1 , and capacitance retention >99.5% after 2000 cycles) can be obtained by using NaBH 4 (12 hours of reaction). Finally, the compatibility of the different CrGOs with wearable and flexible electronics is also demonstrated using skin irritation tests. The strategy described represents a significant advancement towards the development of environmentally friendly CrGOs with ad hoc properties for advanced applications in electronics and energy storage.

The unique electrochemical properties of polyoxometalates (POMs) render them ideal components for the fabrication of next-generation high-performance energy storage systems. However, their practical applications have been hindered by their high solubility in common electrolytes. This problem can be overcome by the effective hybridization of POMs with other materials. Here we present the design and synthesis of two novel polyoxometalate-covalent organic frameworks (POCOF) via one-pot solvothermal strategy between an amino-functionalized Anderson-type POM and a trialdehyde-based building unit. We show that structural and functional complexity can be enriched by adding hydroxyl groups in the 2,4,6 position to the benzene-1,3,5-tricarbaldehyde allowing to exploit for the first time in POCOFs the keto-enol tautomerization as additional feature to impart greater chemical stability to the COFs and enhanced properties leading to large specific surface area (347 m 2 /g) and superior electrochemical performance of the POCOF-1 electrodes, when compared with POCOF-2 electrodes that possess only imine-type linkage and with pristine POM electrodes. Specifically, POCOF-1 electrodes display remarkable specific, areal, and volumetric capacitance (125 F/g, 248 mF/cm 2 and 41.9 mF/cm 3 , respectively) at a current density of 0.5 A/g, a maximum energy density (56.2 Wh/kg), a maximum power density (3.7 kW/kg) and an outstanding cyclability (90 % capacitance retention after 5000 cycles)., (© 2023 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

Transition metal carbides and nitrides (MXenes) are an emerging class of 2D materials, which are attracting ever-growing attention due to their remarkable physicochemical properties. The presence of various surface functional groups on MXenes' surface, e.g., F, O, OH, Cl, opens the possibility to tune their properties through chemical functionalization approaches. However, only a few methods have been explored for the covalent functionalization of MXenes and include diazonium salt grafting and silylation reactions. Here, an unprecedented two-step functionalization of Ti 3 C 2 T x MXenes is reported, where (3-aminopropyl)triethoxysilane is covalently tethered to Ti 3 C 2 T x and serves as an anchoring unit for subsequent attachment of various organic bromides via the formation of CN bonds. Thin films of Ti 3 C 2 T x functionalized with linear chains possessing increased hydrophilicity are employed for the fabrication of chemiresistive humidity sensors. The devices exhibit a broad operation range (0-100% relative humidity), high sensitivity (0.777 or 3.035), a fast response/recovery time (0.24/0.40 s ΔH -1 , respectively), and high selectivity to water in the presence of saturated vapors of organic compounds. Importantly, our Ti 3 C 2 T x -based sensors display the largest operating range and a sensitivity beyond the state of the art of MXenes-based humidity sensors. Such outstanding performance makes the sensors suitable for real-time monitoring applications., (© 2023 The Authors. Small Methods published by Wiley-VCH GmbH.)

During the last fifteen years, the reduction of electrically insulating graphene oxide (GO) through the elimination of oxygen containing functional groups and the restoration of sp 2 conjugation yielding its conducting form, known as reduced graphene oxide (rGO), has been widely investigated as a scalable and low-cost method to produce materials featuring graphene-like characteristics. Among various protocols, thermal annealing represents an attractive green approach compatible with industrial processes. However, the high temperatures typically required to accomplish this process are energetically demanding and are incompatible with the use of plastic substrates often desired for flexible electronics applications. Here, we report a systematic study on the low-temperature annealing of GO by optimizing different annealing conditions, i.e. , temperature, time, and reduction atmosphere. We show that the reduction is accompanied by structural changes of GO, which affect its electrochemical performance when used as an electrode material in supercapacitors. We demonstrate that thermally-reduced GO (TrGO) obtained under air or inert atmosphere at relatively low temperatures (<300 °C) exhibits low film resistivities (10 -2 -10 -4 Ω m) combined with unaltered resistance after 2000 bending cycles when supported on plastic substrates. Moreover, it exhibits enhanced electrochemical characteristics with a specific capacitance of 208 F g -1 and a capacitance retention of >99% after 2000 cycles. The reported strategy is an important step forward toward the development of environmentally friendly TrGO for future electrical or electrochemical applications.

Two-dimensional covalent organic frameworks (COFs) have emerged as promising materials for energy storage applications exhibiting enhanced electrochemical performance. While most of the reported organic cathode materials for zinc-ion batteries use carbonyl groups as electrochemically-active sites, their high hydrophilicity in aqueous electrolytes represents a critical drawback. Herein, we report a novel and structurally robust olefin-linked COF-TMT-BT synthesized via the aldol condensation between 2,4,6-trimethyl-1,3,5-triazine (TMT) and 4,4'-(benzothiadiazole-4,7-diyl)dibenzaldehyde (BT), where benzothiadiazole units are explored as novel electrochemically-active groups. Our COF-TMT-BT exhibits an outstanding Zn 2+ storage capability, delivering a state-of-the-art capacity of 283.5 mAh g -1 at 0.1 A g -1 . Computational and experimental analyses reveal that the charge-storage mechanism in COF-TMT-BT electrodes is based on the supramolecularly engineered and reversible Zn 2+ coordination by the benzothiadiazole units., (© 2023 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

The use of postsynaptic current to drive long-lasting luminescence holds a disruptive potential for harnessing the next-generation of smart displays. Multiresponsive long afterglow emission can be achieved by integrating light-emitting polymers in electric spiked transistors trigged by distinct presynaptic signals inputs. Here, we report a highly effective electric spiked long afterglow organic light-emitting transistor (LAOLET), whose operation relies on a nanofloating gate architecture. Long afterglow emission with reconfigurable brightness and retention time is observed upon applying specific positive gate voltage spiked. Conversely, when negative gate voltage stimulus is applied, these LAOLETs function as click-on display. Interestingly, upon endowing the device with force sensing capabilities, it can operate as a long afterglow pressure sensor that emits long-lasting green light subsequently to a controlled extrusion action.

Health monitoring is experiencing a radical shift from clinic-based to point-of-care and wearable technologies, and a variety of nanomaterials and transducers have been employed for this purpose. 2D materials (2DMs) hold enormous potential for novel electronics, yet they struggle to meet the requirements of wearable technologies. Here, aiming to foster the development of 2DM-based wearable technologies, reduced graphene oxide (rGO)-based liquid-gated transistors (LGTs) for cation sensing in artificial sweat endowed with distinguished performance and great potential for scalable manufacturing is reported. Laser micromachining is employed to produce flexible transistor test patterns employing rGO as the electronic transducer. Analyte selectivity is achieved by functionalizing the transistor channel with ion-selective membranes (ISMs) via a simple casting method. Real-time monitoring of K + and Na + in artificial sweat is carried out employing a gate voltage pulsed stimulus to take advantage of the fast responsivity of rGO. The sensors show excellent selectivity toward the target analyte, low working voltages (<0.5 V), fast (5-15 s), linear response at a wide range of concentrations (10 µm to 100 mm), and sensitivities of 1 µA/decade. The reported strategy is an important step forward toward the development of wearable sensors based on 2DMs for future health monitoring technologies., (© 2022 The Authors. Small published by Wiley-VCH GmbH.)

We report a fast and ultrasensitive colorimetric method for the detection of transition metal ions (Fe 3+ , Cu 2+ , Ni 2+ ) in a mixture of toluene-acetonitrile using Schiff base functionalized gold nanoparticles. We achieved limits of detection for the three metal ions at least two orders of magnitude lower than the EU recommended limits. Finally, our methodology was assessed for the determination of nickel in the organic waste of a relevant industrial reaction.

Janus two-dimensional materials (2DMs) are a novel class of 2DMs in which the two faces of the material are either asymmetrically functionalized or are exposed to a different local environment. The diversity of the properties imparted to the two opposing sides enables the design of new multifunctional materials for applications in a broad variety of fields including opto-electronics, energy storage, and catalysis. In this perspective, we summarize the most enlightening experimental methods for the asymmetric chemical functionalization of 2DMs with tailored made (macro)molecules by means of a supratopic binding (one side) or antaratopic binding (two sides) process. We describe the emergence of unique electrical and optical characteristics resulting from the asymmetric dressing of the two surfaces. Representative examples of Janus 2DMs towards bandgap engineering, enhanced photoresponse and photoluminescence are provided. In addition, examples of Janus 2DMs for real applications such as energy storage (batteries and supercapacitors) and generation (photovoltaics), opto-electronics (field-effect transistors and photodetectors), catalysis, drug delivery, self-healing materials, chemical sensors and selective capture and separation of small molecules are also described. Finally, we discuss the future directions, challenges, and opportunities to expand the frontiers of Janus 2DMs towards technologies with potential impact in environmental science and biomedical applications., Competing Interests: The authors declare no competing financial interest., (This journal is © The Royal Society of Chemistry.)

Chemical sensing is a strategic field of science and technology ultimately aiming at improving the quality of our lives and the sustainability of our Planet. Sensors bear a direct societal impact on well-being, which includes the quality and composition of the air we breathe, the water we drink, and the food we eat. Pristine low-dimensional materials are widely exploited as highly sensitive elements in chemical sensors, although they suffer from lack of intrinsic selectivity towards specific analytes. Here, we showcase the most recent strategies on the use of (supra)molecular interactions to harness the selectivity of suitably functionalized 0D, 1D, and 2D low-dimensional materials for chemical sensing. We discuss how the design and selection of receptors via machine learning and artificial intelligence hold a disruptive potential in chemical sensing, where selectivity is achieved by the design and high-throughput screening of large libraries of molecules exhibiting a set of affinity parameters that dictates the analyte specificity. We also discuss the importance of achieving selectivity along with other relevant characteristics in chemical sensing, such as high sensitivity, response speed, and reversibility, as milestones for true practical applications. Finally, for each distinct class of low-dimensional material, we present the most suitable functionalization strategies for their incorporation into efficient transducers for chemical sensing.

The development of novel, highly efficient, reliable, and robust surface enhanced Raman scattering (SERS) substrates containing a large number of hot spots with programmed size, geometry, and density is extremely interesting since it allows the sensing of numerous (bio-)chemical species. Herein, an extremely reliable, easy to fabricate, and label-free SERS sensing platform based on metal nanoparticles (NPs) thin-film is developed by the layer-by-layer growth mediated by polyelectrolytes. A systematic study of the effect of NP composition and size, as well as the number of deposition steps on the substrate's performance, is accomplished by monitoring the SERS enhancement of 1-naphtalenethiol (532 nm excitation). Distinct evidence of the key role played by the interlayer (poly(diallyldimethylammonium chloride) (PDDA) or PDDA-functionalized graphene oxide (GO@PDDA)) on the overall SERS efficiency of the plasmonic platforms is provided, revealing in the latter the formation of more uniform hot spots by regulating the interparticle distances to 5 ± 1 nm. The SERS platform efficiency is demonstrated via its high analytical enhancement factor (≈10 6 ) and the detection of a prototypical substance(tamoxifen), both in Milli-Q water and in a real matrix, viz. tap water, opening perspectives towards the use of plasmonic platforms for future high-performance sensing applications., (© 2021 Wiley-VCH GmbH.)

Noble metal nanoparticles (NPs) are ideal scaffolds for the fabrication of sensing devices because of their high surface-to-volume ratio combined with their unique optical and electrical properties which are extremely sensitive to changes in the environment. Such characteristics guarantee high sensitivity in sensing processes. Metal NPs can be decorated with ad hoc molecular building blocks which can act as receptors of specific analytes. By pursuing this strategy, and by taking full advantage of the specificity of supramolecular recognition events, highly selective sensing devices can be fabricated. Besides, noble metal NPs can also be a pivotal element for the fabrication of chemical nose/tongue sensors to target complex mixtures of analytes. This review highlights the most enlightening strategies developed during the last decade, towards the fabrication of chemical sensors with either optical or electrical readout combining high sensitivity and selectivity, along with fast response and full reversibility, with special attention to approaches that enable efficient environmental and health monitoring.

High-performance flexible strain sensors are key components for the next generation of wearable health monitoring devices. Here, the authors have fabricated a novel strain sensor based on gold nanoparticles (AuNPs) interconnected by flexible and responsive molecular linkers. The combination of conductive AuNPs (25 nm in diameter) with tetra(ethylene glycol) dithiol (SH-TEG-SH) linkers yields a covalent 3D network which can be directly deposited onto prepatterned flexible supports exposing interdigitated Au electrodes. The electrically insulating nature of the linkers effectively defines the tunneling modulated charge transfer through the AuNPs network. When compressive/tensile strain is applied, the molecular linkers adopt a compressed/stretched conformation thus decreasing/increasing the interparticle distance, ultimately yielding an exponential increase/decrease of the tunneling current when voltage is applied. The strain sensor displays state-of-the-art performances including a highly sensitive response to both tensile and compressive strain, as quantified by a high gauge factor (GF≈126) combined with other superior sensing properties like high flexibility, short response time (16.1 ms), and good robustness (>2000 cycles). Finally, the applicability of the device for health monitoring is demonstrated: high-resolution artery pulse waves are acquired by placing the strain sensor onto the skin allowing the extraction of important physical parameters for human-health assessment., (© 2021 Wiley-VCH GmbH.)

A novel hybrid plasmonic platform based on the synergetic combination of a molecularly imprinted polymer (MIP) thin film with Au nanoparticle (NPs) assemblies, noted as Au@MIP, was developed for surface-enhanced Raman scattering (SERS) spectroscopy recognition of polycyclic aromatic hydrocarbons (PAHs). While the MIP trapped the PAH close to the Au surface, the plasmonic NPs enhanced the molecule's Raman signal. The Au@MIP fabrication comprises a two-step procedure, first, the layer-by-layer deposition of Au NPs on glass and their further coating with a uniform MIP thin film. Profilometry analysis demonstrated that the thickness and homogeneity of the MIP film could be finely tailored by tuning different parameters such as prepolymerization time or spin-coating rate. Two different PAH molecules, pyrene or fluoranthene, were used as templates for the fabrication of pyrene- or fluoranthene-based Au@MIP substrates. The use of pyrene or fluoranthene, as the template molecule to fabricate the Au@MIP thin films, enabled its ultradetection in the nM regime with a 100-fold improvement compared with the nonimprinted plasmonic sensors (Au@NIPs). The SERS data analysis allowed to estimate the binding constant of the template molecule to the MIP. The selectivity of both pyrene- and fluoranthene-based Au@MIPs was analyzed against three PAHs of different sizes. The results displayed the important role of the template molecule used for the Au@MIPs fabrication in the selectivity of the system. Finally, the practical applicability of pyrene-based Au@MIPs was shown by performing the detection of pyrene in two real samples: creek water and seawater. The design and optimization of this type of plasmonic platform will pave the way for the detection of other relevant (bio)molecules in a broad range of fields such as environmental control, food safety, or biomedicine.

A simple procedure to obtain highly porous hydrophilic palladium nanodendrites in one-step is described. The synthetic strategy is based on the thermal reduction of a Pd precursor in the presence of a positively charged polyelectrolyte such as polyethylenimine (PEI). Advanced electron microscopy techniques combined with X-ray diffraction (XRD), thermogravimetry and BET analysis demonstrate the polycrystalline nature of the nanodendrites as well as their high porosity and active surface area, facilitating a better understanding of their unique morphology. Besides, catalytic studies performed using Raman scattering and UV-Vis spectroscopies revealed that the nanodendrites exhibit a superior performance as recyclable catalysts towards hydrogenation reaction compared to other noble metal nanoparticles.

Bacterial quorum sensing systems regulate the production of an ample variety of bioactive extracellular compounds that are involved in interspecies microbial interactions and in the interplay between the microbes and their hosts. The development of new approaches for enabling chemical detection of such cellular activities is important in order to gain new insight into their function and biological significance. In recent years, surface-enhanced Raman scattering (SERS) spectroscopy has emerged as an ultrasensitive analytical tool employing rationally designed plasmonic nanostructured substrates. This review highlights recent advances of SERS spectroscopy for label-free detection and imaging of quorum sensing-regulated processes in the human opportunistic pathogen Pseudomonas aeruginosa . We also briefly describe the challenges and limitations of the technique and conclude with a summary of future prospects for the field.

Novel plasmonic thin films based on electrostatic layer-by-layer (LbL) deposition of citrate-stabilized Au nanoparticles (NPs) and ammonium pillar[5]arene (AP[5]A) have been developed. The supramolecular-induced LbL assembly of the plasmonic nanoparticles yields the formation of controlled hot spots with uniform interparticle distances. At the same time, this strategy allows modulating the density and dimensions of the Au aggregates, and therefore the optical response, on the thin film with the number of AuNP-AP[5]A deposition cycles. Characterization of the AuNP-AP[5]A hybrid platforms as a function of the deposition cycles was performed by means of visible-NIR absorption spectroscopy, and scanning electron and atomic force microscopies, showing larger aggregates with the number of cycles. Additionally, the surface enhanced Raman scattering efficiency of the resulting AuNP-AP[5]A thin films has been investigated for three different laser excitations (633, 785, and 830 nm) and using pyrene as Raman probe. The best performance was shown by the AuNP-AP[5]A film obtained with two deposition cycles ((AuNP-AP[5]A) 2 ) when excited with a 785 laser line. The optical response and SERS efficiency of the thin films were also simulated using the M 3 solver and employing computer aided design models built based on SEM images of the different films. The use of host molecules as building blocks to fabricate (AuNP-AP[5]A) 2 ) films has enabled the ultradetection, in liquid and gas phase, of low molecular weight polyaromatic hydrocarbons, PAHs, with no affinity for gold but toward the hydrophobic AP[5]A cavity. Besides, these plasmonic platforms allowed achieving quantitative detection within certain concentration regimes. Finally, the multiplex sensing capabilities of the AuNP-AP[5]A) 2 were evaluated for their ability to detect in liquid and gas phase three different PAHs.

Microbes produce bioactive chemical compounds to influence the physiology and growth of their neighbors, and our understanding of their biological activities may be enhanced by our ability to visualize such molecules in vivo. We demonstrate here the application of surface-enhanced Raman scattering spectroscopy for simultaneous detection of quorum-sensing-regulated pyocyanin and violacein, produced respectively by Pseudomonas aeruginosa and Chromobacterium violaceum bacterial colonies, grown as a coculture on agar-based plasmonic substrates. Our plasmonic approach allowed us to visualize the expression and spatial distribution of the microbial metabolites in the coculture taking place as a result of interspecies chemical interactions. By combining surface-enhanced Raman scattering spectroscopy with analysis of gene expression we provide insight into the chemical interplay occurring between the interacting bacterial species. This highly sensitive, cost-effective, and easy to implement approach allows spatiotemporal imaging of cellular metabolites in live microbial colonies grown on agar with no need for sample preparation, thereby providing a powerful tool for the analysis of microbial chemotypes.

Establishing a definitive diagnosis of pneumonia using conventional tests is difficult and expensive. Lateral flow immunoassays (LFIAs) are an advantageous point of care (POC) test option, but they have some limitations in terms of detection and quantification. In this work we have developed a lateral flow immunoassay for the ultrasensitive detection of penumolysin employing plasmonic Surface-Enhanced Resonance Raman Scattering (SERRS) tag as labelled probe. The combination of Au@Ag core-shell nanoparticles as plasmonic platform and Rhodamine B Isothiocyanate as Raman reporter has allowed us to fabricate a SERRS tag with high efficiency and reliability. The limit of detection of the SERRS-based LFIA was 1 pg mL -1 . This could be a strong foundation for a pneumonia diagnosis test based on pneumolysin detection.

Most bacteria in nature exist as biofilms, which support intercellular signalling processes such as quorum sensing (QS), a cell-to-cell communication mechanism that allows bacteria to monitor and respond to cell density and changes in the environment. As QS and biofilms are involved in the ability of bacteria to cause disease, there is a need for the development of methods for the non-invasive analysis of QS in natural bacterial populations. Here, by using surface-enhanced resonance Raman scattering spectroscopy, we report rationally designed nanostructured plasmonic substrates for the in situ, label-free detection of a QS signalling metabolite in growing Pseudomonas aeruginosa biofilms and microcolonies. The in situ, non-invasive plasmonic imaging of QS in biofilms provides a powerful analytical approach for studying intercellular communication on the basis of secreted molecules as signals.

Detection technologies employing optically encoded particles have gained much interest toward clinical diagnostics and drug discovery, but the portfolio of available systems is still limited. The fabrication and characterization of highly stable surface-enhanced resonance Raman scattering (SERRS)-encoded colloids for the identification and imaging of proteins expressed in cells are reported. These plasmonic nanostructures are made of gold octahedra coated with poly(N-isopropylacrylamide) microgels and can be readily encoded with Raman active dyes while retaining high colloidal stability in biofluids. A layer-by-layer polyelectrolyte coating is used to seal the outer surface of the encoded particles and to provide a reactive surface for covalent conjugation with antibodies. The targeted multiplexing capabilities of the SERRS tags are demonstrated by the simultaneous detection and imaging of three tumor-associated surface biomarkers: epidermal growth factor receptor (EGFR), epithelial cell adhesion molecule (EpCAM), and homing cell adhesion molecule (CD44) by SERRS spectroscopy. The plasmonic microgels are able to discriminate tumor A431 (EGFR+/EpCAM+/CD44+) and nontumor 3T3 2.2 (EGFR-/EpCAM-/CD44+) cells while cocultured in vitro., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

In this minireview, we summarize current research dealing with the combination of noble-metal nanoparticles and different families of supramolecular macrocycles (cyclodextrins, cucurbit[n]urils, calixarenes, and pillar[n]arenes). We intended to select relevant publications on the synthesis of noble-metal nanoparticles with macrocycles acting as capping agents or/and reducing agents, as well as on the post-synthetic metal-nanoparticle modification with macrocycles. We also discuss strategies in which supramolecular chemistry is applied to direct the self-assembly of nanoparticles and formation of polymer composites. We finally describe the main applications of these materials in various fields., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

We present a simple procedure for the synthesis of quasi-spherical Au nanoparticles in a wide size range mediated by macrocyclic host molecules, ammonium pillar[5]arene (AP[5]A). The strategy is based on a seeded growth process in which the water-soluble pillar[5]arene undergoes complexation of the Au salt through the ammonium groups, thereby avoiding Au nucleation, while acting as a stabilizer. The presence of the pillar[5]arene onto the Au nanoparticle particle surface is demonstrated by surface-enhanced Raman scattering (SERS) spectroscopy, and the most probable conformation of the molecule when adsorbed on the Au nanoparticles surface is suggested on the basis of theoretical calculations. In addition, we analyze the host-guest interactions of the AP[5]A with 2-naphthoic acid (2NA) by using (1)H NMR spectroscopy and the results are compared with theoretical calculations. Finally, the promising synergetic effects of combining supramolecular chemistry and metal nanoparticles are demonstrated through SERS detection in water of 2NA and a polycyclic aromatic hydrocarbon, pyrene (PYR)., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)