Search

Here we show that the praseodymium N , N -dimethylaminodiboranate complex Pr(H 3 BNMe 2 BH 3 ) 3 and the 2,2,6,6-tetramethylheptane-3,5-dionate complex Pr(thd) 3 can serve as volatile carriers for 225 Ac. The actinium coordination complexes Ac(H 3 BNMe 2 BH 3 ) 3 and Ac(thd) 3 are the likely species subliming with the carrier material. A sample of 225 Ac-doped Pr(H 3 BNMe 2 BH 3 ) 3 was used to deposit amorphous 225 Ac-doped praseodymium boride films on glass and Si(100) at 300 °C. The α emission spectra of the refractory films are well-resolved, suggesting that they could be used as radioactive implants for brachytherapy and related treatments.

Receptor-targeted image-guided Radionuclide Therapy (TRT) is increasingly recognized as a promising approach to cancer treatment. In particular, the potential for clinical translation of receptor-targeted alpha-particle therapy is receiving considerable attention as an approach that can improve outcomes for cancer patients. Higher Linear-energy Transfer (LET) of alpha-particles (compared to beta particles) for this purpose results in an increased incidence of double-strand DNA breaks and improved-localized cancer-cell damage. Recent clinical studies provide compelling evidence that alpha-TRT has the potential to deliver a significantly more potent anti-cancer effect compared with beta-TRT. Generator-produced 212Pb (which decays to alpha emitters 212Bi and 212Po) is a particularly promising radionuclide for receptor-targeted alpha-particle therapy. A second attractive feature that distinguishes 212Pb alpha-TRT from other available radionuclides is the possibility to employ elementallymatched isotope 203Pb as an imaging surrogate in place of the therapeutic radionuclide. As direct non-invasive measurement of alpha-particle emissions cannot be conducted using current medical scanner technology, the imaging surrogate allows for a pharmacologically-inactive determination of the pharmacokinetics and biodistribution of TRT candidate ligands in advance of treatment. Thus, elementally-matched 203Pb labeled radiopharmaceuticals can be used to identify patients who may benefit from 212Pb alpha-TRT and apply appropriate dosimetry and treatment planning in advance of the therapy. In this review, we provide a brief history on the use of these isotopes for cancer therapy; describe the decay and chemical characteristics of 203/212Pb for their use in cancer theranostics and methodologies applied for production and purification of these isotopes for radiopharmaceutical production. In addition, a medical physics and dosimetry perspective is provided that highlights the potential of 212Pb for alpha-TRT and the expected safety for 203Pb surrogate imaging. Recent and current preclinical and clinical studies are presented. The sum of the findings herein and observations presented provide evidence that the 203Pb/212Pb theranostic pair has a promising future for use in radiopharmaceutical theranostic therapies for cancer., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

A rapid method for the determination of polonium-210 in air filters has been developed for use following a radiological event and for routine environmental monitoring. Air filter samples, including cellulose and glass fiber, are fused with a sodium or potassium nitrate/sodium hydroxide flux material. The alkaline matrix minimizes polonium volatility during sample digestion steps, while efficiently dissolving the air filter and inorganic matter implanted on the filter. The addition of nitrate to the flux destroys organic material which can decrease Polonium recovery during precipitation, extraction and source preparation steps. Polonium is concentrated and separated from the sample matrix using an iron hydroxide precipitation and extraction chromatography with DGA Resin. Polonium-210 is subsequently measured by alpha spectrometry following rapid microprecipitation with bismuth phosphate. The new method employs extraction chromatographic purification to remove alpha emitting interferences and sample matrix constituents which can interfere with 210 Po measurements using alpha spectrometry. The novel blend of sodium hydroxide and alkali metal nitrate digests the air filters quickly and effectively., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

A rapid method for the determination of polonium-210 in urban matrices has been developed that can be used following a radiological event. Samples such as concrete, soil and granite are fused with sodium hydroxide to minimize polonium volatility during sample digestion and to achieve complete sample dissolution. Complete dissolution of samples is important to ensure method ruggedness. Polonium is concentrated and separated from the sample matrix using an iron hydroxide precipitation and extraction chromatography and subsequently measured by alpha spectrometry following microprecipitation with bismuth phosphate. The chromatographic separation removes alpha emitting interferences and matrix constituents which can adversely impact the measurement via alpha spectrometry., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

This work presents a complete scheme for the selective separation of actinium and radium isotopes from bulk 232 Th target material, in a process that may be applied in a separation scheme for the production of 225 Ac by proton spallation on thorium. Thorium metal is dissolved in sulfuric acid with small amounts of HF. Actinium and radium are retained on cation exchange resin from the sulfate medium, while neutral and anionic thorium sulfate complexes are rejected. Following rinsing steps to remove residual thorium, actinium and radium are recovered from the cation exchange resin using 5 M HNO 3 . Further separations of actinium via extraction chromatography with UTEVA and DGA resins yield actinium in >92% yield, while providing additional decontamination from thorium and other spallation byproducts. The radium fraction can be further processed following ingrowth of 225 Ac from 225 Ra to produce additional 225 Ac free from any potential 227 Ac impurity., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

A fast method for determination of plutonium, neptunium, americium and curium isotopes in granite has been developed for use following a radiological event. Granite samples are fused with sodium hydroxide to achieve complete dissolution, critical if refractory particles are present. Rapid precipitation steps are utilized to preconcentrate the actinide isotopes and remove sample matrix interferences. Plutonium, neptunium, and americium/curium are separated using innovative extraction chromatography and measured by alpha spectrometry. The sample preparation time is less than four hours., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

A method for preparation of Pb-212 and Pb-203 labeled chelator-modified peptide-based radiopharmaceuticals for cancer imaging and radionuclide therapy has been developed and adapted for automated clinical production. Pre-concentration and isolation of radioactive Pb2+ from interfering metals in dilute hydrochloric acid was optimized using a commercially-available Pb-specific chromatography resin packed in disposable plastic columns. The pre-concentrated radioactive Pb2+ is eluted in NaOAc buffer directly to the reaction vessel containing chelator-modified peptides. Radiolabeling was found to proceed efficiently at 85°C (45min; pH 5.5). The specific activity of radiolabeled conjugates was optimized by separation of radiolabeled conjugates from unlabeled peptide via HPLC. Preservation of bioactivity was confirmed by in vivo biodistribution of Pb-203 and Pb-212 labeled peptides in melanoma-tumor-bearing mice. The approach has been found to be robustly adaptable to automation and a cassette-based fluid-handling system (Modular Lab Pharm Tracer) has been customized for clinical radiopharmaceutical production. Our findings demonstrate that the Pb-203/Pb-212 combination is a promising elementally-matched radionuclide pair for image-guided radionuclide therapy for melanoma, neuroendocrine tumors, and potentially other cancers., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

A new radiobioassay method has been developed for simultaneous determination of (90)Sr and (226)Ra in a spot urine sample. The method is based on a matrix removal procedure to purify the target radionuclides from a urine sample followed by an automated high performance ion chromatographic (HPIC) separation of (90)Sr and (226)Ra and offline radiometric detection by liquid scintillation counting (LSC). A Sr-resin extraction chromatographic cartridge was used for matrix removal and purification of (90)Sr and (226)Ra from a urine sample prior to its introduction to the HPIC system. The HPIC separation was carried out through cation exchange chromatography using methanesulfonic acid (75 mM) as the mobile phase at 0.25 mL/min flow rate. The performance criteria of the method was evaluated against the American National Standard Institute ANSI/HPS N13.30-2011 standard for the root mean squared error (RMSE) of relative bias (Br) and relative precision (SB) at two different spiked activity levels. The RMSE of Br and SB for (90)Sr and (226)Ra were found to be satisfactory (≤0.25). The minimum detectable activity (MDA) of the method for (90)Sr and (226)Ra are 2 Bq/L and 0.2 Bq/L, respectively. The MDA values are at least 1/10th of the concentrations of (90)Sr (190 Bq/L) and (226)Ra (2 Bq/L) excreted in urine on the third day following an acute exposure (inhalation) that would lead to an effective dose of 0.1 Sv in the first year. The sample turnaround time is less than 8 h for simultaneous determination of (90)Sr and (226)Ra.

The synthesis, stoichiometry, and structural characterization of a homoleptic, cationic europium(III) complex with three neutral tetraalkyldiglycolamide ligands are reported. The tri(bismuth tetrachloride)tris(N,N,N',N'-tetra-n-octyldiglycolamide)Eu salt, [Eu(TODGA)3][(BiCl4)3] obtained from methanol was examined by Eu L3-edge X-ray absorption spectroscopy (XAS) to reveal an inner-sphere coordination of Eu(3+) that arises from 9 O atoms and two next-nearest coordination spheres that arise from 6 carbon atoms each. A structural model is proposed in which each TODGA ligand with its O=Ca-Cb-O-Cb-Ca=O backbone acts as a tridentate O donor, where the two carbonyl O atoms and the one ether O atom bond to Eu(3+). Given the structural rigidity of the tridentate coordination motif in [Eu(TODGA)3](3+) with six 5-membered chelate rings, the six Eu-Ca and six Eu-Cb interactions are readily resolved in the EXAFS (extended X-ray absorption fine structure) spectrum. The three charge balancing [BiCl4](-) anions are beyond the cationic [Eu(TODGA)3](3+) cluster in an outer sphere environment that is too distant to be detected by XAS. Despite their sizeable length and propensity for entanglement, the four n-octyl groups of each TODGA (for a total of twelve) do not perturb the Eu(3+) coordination environment over that seen from previously reported single-crystal structures of tripositive lanthanide (Ln(3+)) complexes with tetraalkyldiglycolamide ligands (of the same 1:3 metal-to-ligand ratio stoichiometry) but having shorter i-propyl and i-butyl groups. The present results set the foundation for understanding advanced solvent extraction processes for the separation of the minor, tripositive actinides (Am, Cm) from the Ln(3+) ions in terms of the local structure of Eu(3+) in a solid state coordination complex with TODGA.

Rapid methods for the isolation and analysis of individual actinides (Th, U, Pu, Am/Cm) and Sr, Tc and Po from small volumes of raw urine have been developed. The methods involve acidification of the sample and the addition of aluminum nitrate or aluminum chloride salting-out agent prior to isolation of the desired analyte using a tandem combination of prefilter material and extraction chromatographic resin. The method has been applied to the separation of individual analytes from spiked urine samples. Analytes were recovered in high yield and radionuclide purity with separation times as low as 30 min. The chemistry employed is compatible with automation on the ARSIIe instrument.

Polychlorodibenzo-p-dioxins, polychorodibenzofurans and "dioxin-like" polychlorinated biphenyls are widespread persistent organic pollutants sharing a similar toxicological pathway mediated by the aryl-hydrocarbon receptor (AhR). Since the confirmatory method for their measurement at trace levels in complex matrices (using isotopic dilution and gas chromatography-high resolution mass spectrometry) remains time and cost-consuming, growing efforts of the scientific community have been focused on the development of screening approaches, including AhR mediated assays. Unfortunately, AhR ligands are highly diverse and agonistic/antagonistic effects can be observed on procedural blanks and/or sample extracts. In this study, the influence of solvent grade quality on the response of a DNA-binding AhR mediated assay used for screening dioxins has been investigated. Our results demonstrated a very critical impact of this parameter with both strong agonistic and antagonistic effects observed for any tested solvent lot. A small silver nitrate silica column removed partly these interfering compounds and then can be recommended as final purification step. Some preferable grades can be identified and selected in order to guarantee the best possible performances. However, it appears necessary to test every new lot, even if a grade appeared previously compliant., (Copyright (c) 2009 Elsevier B.V. All rights reserved.)

This work describes automated chromatographic methods for the separation of medically useful radionuclides from source material containing their parent radionuclides. The separation techniques employ two chromatographic columns to ensure high chemical and radiochemical purity of the product radionuclide. The separations were performed using an automated system, the automated radionuclide separator (ARS2), consisting of syringe pumps and multiport valves controlled through a computer interface. Generator systems for (68)Ga, (99m)Tc, (188)Re and (213)Bi will be described.

A method for the estimation of polychlorinated dibenzo-p-dioxin and furan (PCCD/F) toxicity equivalent quotient (TEQ) of soil and sediment matrices is described. The method includes extraction, isolation of the PCDD/Fs from interfering compounds, such as polychlorinated biphenyls (PCBs) and polycyclic aromatic hydrocarbons (PAHs), and measurement of PCDD/F using the PROCEPT aryl hydrocarbon (AhR) receptor based polymerase chain reaction (PCR) assay. The values obtained using the PROCEPT assay correlate well with reference TEQ values generated from gas chromatography-high resolution mass spectrometry (GC-HRMS), with a linearity coefficient (R(2)) of 0.94. Applied in a screening mode at 50pg/g PCDD/F TEQ, the PROCEPT assay yielded five false positive results (2.6%) and no false negative results for 196 analyses of spiked soils and environmental samples obtained from US EPA Superfund sites.

A quick, simple and effective chromatographic method for the separation of beryllium from a wide range of elements is described. The elements selected comprise elements which can interfere with the determination of beryllium by inductively coupled plasma-atomic emission spectroscopy (ICP-AES) and elements which commonly occur in environmental and industrial sample matrices. Beryllium is separated from all possible ICP-AES spectral interfering elements using a single extraction chromatographic (EXC) cartridge containing an acidic chelating organophosphorus extractant, Dipex((R)), sorbed onto an inert polymeric substrate. The separation method has been evaluated using simulated samples generated using several different digestion methods currently employed in beryllium analyses performed in Department of Energy (DOE) facilities. Incorporating a guard cartridge containing either 2-ethyl-1-hexylphosphonic acid mono 2-ethyl-1-hexyl ester or bis(2,4,4-trimethylpentyl)phosphinic acid to selectively remove U(VI) allows the isolation of beryllium from samples containing over 100mg of uranium without changing the load, rinse or strip conditions of the method.