Search

To evaluate whether there are differences among orthodontists in the clinical management of facemask treatment for early treatment of Class III malocclusion, a survey consisting of 16 questions was conducted among members of the Italian Society of Orthodontics (SIDO). Sixty percent of the respondents were Specialists in Orthodontics (S) whereas 40% were General Dentists practicing Orthodontics (GD). Descriptive statistics were calculated to summarize the collected data. Differences in answers between S and GD were assessed with the Fisher's exact test for dichotomous variables, chi-square test for qualitative variables, and Mann-Whitney test for ordinal variables. A total of 151 clinicians participated in this survey. As for treatment timing, about 80% of the participants reported treating Class III patients with RPE and facemask between 5 and 8 years of age. Most of the participants requested the patients to wear the facemask in the afternoon and at night for a period of 9 or 12 months with recommended forces of 500 g per side. Comparisons between S and GD showed that S preferred the Petit facemask whereas GD favored the Delaire's type facemask (Fisher's Exact test, p = 0.0005). S and GD also differed significantly in their judgment of the most critical time of treatment, which for the majority of GD was the initial period but for the S was the final period (Chi-square test p = 0.0188). This survey showed that the facemask is not well received by the patients who, along with their parents, express concerns regarding its tolerability.

In order to improve fit and comfort, a maxillary protraction facemask customized to the patient's anatomy was produced by means of 3D face scanning, digital design and additive manufacturing. An 8-year-old patient in need of early treatment for the Class III malocclusion received a rapid palatal expander and a Petit-type facemask, whose components were digitally designed on a 3D scan of the patient's face. For face scanning, the iPad Pro 2018 tablet (Apple, Cupertino, CA, USA) with the Bellus3D DentalPro application (Bellus3D, Campbell, CA, USA) was used. Facemask components were modelled with 3D Blender software. The rests were 3D printed in BioMed Clear biocompatible resin (Formlabs, Somerville, MA, USA), and the bar in stainless steel. For greater comfort, the internal surface of the rests was lined with a polymer gel pad (Silipos, Niagara Falls, NY, USA). The manufacturing procedure of the customized facemask is patented. The patient wore the facemask at night for a period of 9 months. The patient's experience was evaluated with a questionnaire at 1 week, 3, 6, and 10 months of treatment. The customized facemask was well accepted by the patient and obtained the expected treatment outcome. Furthermore, 3D face scanning, 3D modelling and 3D printing allow for the manufacturing of customized facemasks with improved fit and comfort, favoring patient compliance and treatment success.

This paper presents an experiment in which participants had to discriminate three mid-air haptic shapes (circle, square, point) by reporting whether the haptic stimulus (e.g. circle on the palm of the hand) was compatible with an image (e.g. a circle) or a word (e.g. 'circle') displayed on a screen. Results indicate that only the 'point' stimulus was appreciably recognised and discriminated in terms of accuracy and time needed for the identification. Accuracy increased with repetition, and response time decreased, suggesting a learning effect. The comparison between visual and textual labels shows that for the haptic point stimulus there is no significant difference but a tendency to have greater accuracy with images than with texts, while the opposite result is found for the circle stimulus. This outcome suggests the need for new experiments focussed of the effect of visual/textual labels to make the recognition/discrimination tasks of haptic stimuli easier. Practitioner Summary: Three haptic shapes were presented with images or texts, matching or not the stimuli. The point was easy to recognise, while the circle and the square were difficult to discriminate against each other. Visual/textual labels bring contradictory results for different shapes. Abbreviations: 1D: one-dimensional; 2D: two-dimensional; 3D: three-dimensional; API: application programming interface; cm: centimeter; GLMM: generalised linear mixed-effect model; HCI: human-computer interaction; Hz: hertz; LMM: linear mixed-effect model; MCC: Matthews' correlation coefficient; mm: millimeter; ms: millisecond; QQ-plot: Quantile-Quantile plot; SD: standard deviation.

Introduction: The purpose of the following research was to provide a systematic survey on the use of additive manufacturing in vascular surgery. The survey focuses on applications of 3D printing in endovascular surgery like endovascular aneurysm repair (EVAR), a quite unexplored application domain. 3D printing is an additive production process of three-dimensional objects starting from a three-dimensional digital model. This kind of manufacturing process is getting great attention in the medical field and new applications have emerged in recent years especially thanks to the combination of additive printing with 3D imaging techniques. The purpose of the study is to reflect on additive manufacturing and its potential as an inclusive manufacturing practice which can provide benefits at economic and societal level., Evidence Acquisition: The article first introduces the use of 3D printing in surgery by summarizing the results of previous reviews which reveal three main usages of 3D printing: anatomic models, surgical tools, implants and prostheses. These studies point out that vascular surgery is still an unexplored field of application of 3D printing. Starting from this result, a new survey was carried out in databases Pubmed, Elsevier, Research Gate and ACM Digital Library for terms related to 3D printing in vascular surgery using the following keywords: 3D printing, vascular surgery, EVAR, aneurysm. The search screened articles published up to 2019 for relevance and practical application of the technology in vascular surgery, in particular the topic is related to the treatment of complex abdominal aortic aneurysm., Evidence Synthesis: Initially 437 records published up to 2019 were found, but then were narrowed down to 29 full-text articles. The findings reveal that in addition to the applications found in the previous studies, new experiments are ongoing related to the use of 3D printing in the "Off label" practice to manually fenestrate the stent to improve the accuracy of the EVAR., Conclusions: Different applications of the use of 3D printing and digital imaging in vascular surgery have been experimented with a different maturity level. Whilst the technology has increased its potential in the latest years, the number of studies documented in the literature is still quite narrow. Further research is necessary to fully test the potential of 3D printing, also in combination with other technologies (e.g. 3D imaging and CNC cutting). Early experimentations show that these technologies have the potential to radically change the vascular surgery practice in the near future, in particular in treatment like EVAR, to improve the planning and therefore the success of the surgery.

This multi-perspective study focuses on how a service robot for the elderly should behave when interacting with potential users. An existing service robot and a scenario were used as a concrete case, which was discussed and analyzed during focus group sessions with older adults (n = 38), informal caregivers (n = 24), and professional caregivers (n = 35) in the Netherlands, France, and the United Kingdom. A total of seven topics-privacy, task execution, environment, appearance, behavior, visitors, and communication-were explored. The results showed that some of the characteristics mentioned were unique to a user group, but several were cross-cutting. Overall, potential users expected the service robot to be customizable in order to match the users' needs and preferences. Also, high expectations concerning its functioning and behavior were expressed, which sometimes could even be compared to the qualities of a human being. This emphasizes the complexity of service robot development for older adults, and highlights the need for a personalized and flexible solution. One size does not fit all, and specific attention should be paid to the development of the robot's social behavior and skills beyond a mere functional support for the person.

Background: The phenomenon of cyberbullying is on the rise among adolescents and in schools., Objective: To evaluate the relationship between personality characteristics such as empathy, the tendency to implement cognitive mechanisms aimed at moral disengagement, and the use of social media., Participants: Italian students from first to fifth year in high school classes (n = 264)., Methods: A questionnaire was used to gather information on the sociodemographic characteristics of the participants, their use of social media, their level of empathy (Basic Empathy Scale, BES), and mechanisms of moral disengagement (Moral Disengagement Scale MDS). Two questions were included to determine whether each participant had ever been a victim of or witness to cyberbullying., Results: Results suggest that offensive behaviors are related to mechanisms of moral disengagement and to interaction using forms of communication that allow anonymity. In addition, offensive behavior appears to be related to forms of Internet addiction, while prosocial behavior is linked with cognitive empathy., Conclusion: In order to promote the establishment of prosocial behavior, it would seem necessary for the various players involved - schools, parents, social network developers - to make an effort to implement educational environments and virtual social networks based on a hypothesis of "design for reflection", educating young people about the need to take the time to understand their feelings and relationships expressed via social media.

Purpose: The potential of service robots for seniors is given increasing attention as the ageing population in Western countries will continue to grow as well as the demand for home care. In order to capture the experience of living with a robot at home, a multi-perspective evaluation was conducted., Methods: Older adults (n = 10) were invited to execute an actual interaction scenario with the Care-O-bot ® robot in a home-like environment and were questioned about their experiences. Additionally, interviews were conducted with the elderly participants, informal carers (n = 7) and professional caregivers (n = 11)., Results: Seniors showed to be more keen to accept the robot than their caregivers and relatives. However, the robot in its current form was found to be too limited and participants wished the robot could perform more complex tasks. In order to be acceptable a future robot should execute these complex tasks based on the personal preferences of the user which would require the robot to be flexible and extremely smart, comparable to the care that is delivered by a human carer., Conclusions: Developing the functional features to perform activities is not the only challenge in robot development that deserves the attention of robot developers. The development of social behaviour and skills should be addressed as well. This is possible adopting a person-centred design approach, which relies on validation activities with actual users in realistic environments, similar to those described in this paper. Implications for rehabilitation Attitude of older adults towards service robots Potential of service robotsfor older adults.

Pervasive computing research is introducing new perspectives in a wide range of applications, including healthcare domain. In this study we explore the possibility to realize a prototype of a system for unobtrusive recording and monitoring of multiple biological parameters on premature newborns hospitalized in the Neonatal Intensive Care Unit (NICU). It consists of three different units: a sensitized belt for Electrocardiogram (ECG) and chest dilatation monitoring, augmented with extrinsic transducers for temperature and respiratory activity measure, a device for signals pre-processing, sampling and transmission through Bluetooth(R) (BT) technology to a remote PC station and a software for data capture and post-processing. Preliminary results obtained by monitoring babies just discharged from the ward demonstrated the feasibility of the unobtrusive monitoring on this kind of subjects and open a new scenario for premature newborns monitoring and developmental cares practice in NICU.